General Error when I try to out put DVD in Encore CS4
I have been trying to output a dvd from and encore project and am continually getting errors. I have imported mpg movie assets. I am working on Encore CS4 Windows XP. I get "General Error" message.
I have also tried other file formats like AVI and still got "Transcoding Failed"errors with the transcoding process, not one of the settings in Transcoding was working, that was when I went to mpg files, those are already dvd ready assets no transcoding necessary.
Any Help would be greatly appreciated.
Thank you
Thank you for responding.
I am on system Windows XP
Service Pack 3
I7 Processor
2.8 GHz, 3 GB Ram
HDD
Using 103 GB
Free Space 828 GB
Encore Project:
Simple Menu with 2 navigation buttons linked to two assets on seperate timelines.
The Assets:
mpg file Duration 0:36:40 File size 1.6 GB
mpg file Duration 0:38:47 File Size 1.8 GB
I just imported the assets as timelines, there are no chapter markers for navigation nor no editing on the timelines, I just want to output to DVD and I'm getting "General Error" When I start to build.
file fits on 4.7 DVD
DVD Transcode Settings are at "Don't Transcode"
DVD Transcode Status are at "Don't Transcode"
Hope that covers it, thank you so much for your help
Similar Messages
-
Please anyone whit same problem tell me something i need a solution...
Best regards,
Luís Vaz de Miranda.I do not believe the Resource Central exists anymore. You can download the CS6 full library.
http://helpx.adobe.com/encore/using/download-library-content.html -
0x80220022 error when I try to burn a DVD
Hi,
I get an error message (0x80220022) whenvever I try to burn a DVD. Same message occurs in both toast titanium and in the finder.
When in toast the program starts verifying the information to be burned but I get the error message and the DVD is ejected.
In the Finder I can't burn using a burn folder or directly for a particular file. If I copy and paste things at first appear to work. The files seem to be on the DVD after I have pasted them onto the DVD. I move the old copied files from the Finder to the trash, I empty the trash and then usually quit the finder to update the information under the HD icon as to amount of space left. The amount of space doesn't change so I will reboot to see if that updates the amount of space left information. After reboot, the information hasn't changed and the DVD I thought I burned is now empty and there is a burn folder on the desktop called 'untitled folder x' that contains the files I thought I had copied and pasted to the DVD within it. (The files I had burned are in the new burn folder).
I've tried different media, different , manufacturers of media etc.
Anyone have ANY ideas ?Hi appleboyperry-
Can you burn a CD?
Sounds like the DVD part is no longer functioning. It is possible to replace the optical drive yourself.
Luck-
-DaddyPaycheck -
General error when i try to render my project
What does this mean? How do i fix this?
Computer model?
Version of Mac OS X, QuickTime, Final Cut Studio?
Video format that you are working with?
FCP's Sequence Settings?
Location of the media files on your computer?
Amount of free space on the hard drive that you are writing to?
Little things like that and anything else that you feel might be of importance. -
I am getting this error when I try to BUILD my DVD.
PGC "name of timeline" has an error at 1219.7852s. The aspect ratio of this file is not supported by DVD. -PGC info: name = name of timeline, ref = Bpgc, time = 1219.7852s.
http://forums.adobe.com/message/2919564#2919564
In this thread, this error was caused by having a gap at the beginning of timeline. -
Suggestions would be welcome!
Dear ATR
I am using Première Elements 10 on a Mac Pro
I was trying to burn to DVD-VIDEO widescreen, although I tried all the
options in desperation including folders!
Space required was about 3.7 GB, but instead of filling the space
available, as it didn¹t work, I tried 2.5 GB without success.
I use all Timeline menu markers including red ones to indicate the end
of a movie, as there are several in the project. Scene markers and stop
markers can therefore be close. Where there were red frames around button, I
moved the buttons away from each other as required.
By complicated, I meant that my movies tend to include transitions
throughout movies and stills background music titles - clipart and
dialogue, which I considered might be too much for the system to handle!
Since I posted my query, I have taken a lot of transitions out of the
movie (I usually choose a default transition of ³cross dissolve² between
each video/still in the set-up). This has worked, and subject to re-viewing
the movie, I am hoping that it is the cure and I will reset the defaults
accordingly.
Thanks for you interest in my problem.
Best regards,
TopCat38. -
Why do I keep getting the following error when I try to burn a DVD using Mac Finder?
"The disk can't be burned because communication between the computer and the disc drive failed (error code 0x80020022)."I forgot about this since I upgraded to an external burn drive but I used to get this error whenever I tried to used a DVD or CD Blank Disc that was a DVD + R or a DVD +/- R or RW Disc Try using only the DVD -R or DVD -RW Disc (Minus sign - )
-
I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro....
The operation can’t be completed because an unexpected error occurred (error code -50)I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
Unfortunately the error messages are archane and it is hard to discover their meaning.
You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
A5. http://pondini.org/TM/Troubleshooting.html
Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that. -
General Error when Doing Export
I'm getting a "General Error" when exporting a sequence, both as a reference QuickTime and as a self-contained QuickTime file. The process goes along until a certain percentage (73%), and then it bails, and gives this not-very-specific "General Error" message.
I've gone into the timeline and figured what I think is 73% of the timeline, and taken a look at the media at that point, which happens to be a Motion project brought into FCP as a .mov. I've pulled out the Motion project files, re-exported it out of Motion, and put the project back in.
I've also repaired permissions, run Disk Warrior, gone from 10.4.9 > 10.4.10, and up'd my QuickTime version to 7.2.0 (Pro).
I'm using FCP 5.1.4, with Motion 2.1.2
I'm not sure what else to try, or what else to consider.Hi,
I am also having the same "General Error" message when i am trying to export a sequence that have the setting of HDV720p30 to a QT movie using export to Quicktime Movie>using the Current Settings on the Export tab.
This project is a concert i shot with 4 cameras. I have 4 sequences for the different camera angles and since there are three tapes, i had to line them together on each of their sequence and export them to be a self contained QT movie. I am using the export to Quicktime after right clicking on the sequence.
After that i was going to import them onto FCP Project and then multiclip edit the concert. I just love Multiclip editing.
I am able to export 1 of the 4 angles have and ran into this General Errorr Message.
I have tried making a new sequence, i have also tried using compressor but did not have the patience of waiting 10 hours to export the movie and also i didn't want to see the general error message at the end of the export so i came to ask any FCP Guru out there that can guide me. thanks. -
Encounter "GENERAL ERROR" when rendering
What makes general error when try render certain section in the timeline and how to over come it or prevent it ?
It can be any section. In fact it occurred in my original project. In order not to spoil my original project, I started copying section by section and render it bit by bit. And I found out it can happen to any section. I discovered that there are certain parts when I add transition and render it, then the message "general error" will show. So I cannot put any transition on that part. And I have to undo it. As far as my scratch disk, I am using external hard disc 1 tb, but left only 82 gb.
Thks -
Error when I try to access my yahoo mailbox
I am using JavaMail for accesing my yahoo mailbox.
I get the following error when I try to access my mailbox
Exception :: javax.mail.AuthenticationFailedException: Error logging in.
Session session = Session.getInstance(properties,new Authenticator()
public PasswordAuthentication getPasswordAuthentication()
String username = getUser();
String password = getPassword();
return new PasswordAuthentication(username,password);
Store store = session.getStore("pop3");
store.connect(getPopHost(),user,password);
please any one help me.
i thinked error problem in
Store store = session.getStore("pop3");
store.connect(getPopHost(),user,password);
any of this lines.
please tell ur sugestions.
thanks in advance.try it.
public class SendMailUsingAuthentication
private static final String SMTP_HOST_NAME = "myserver.smtphost.com";
private static final String SMTP_AUTH_USER = "myusername";
private static final String SMTP_AUTH_PWD = "mypwd";
private static final String emailMsgTxt = "a message.";
private static final String emailSubjectTxt = "a subject";
private static final String emailFromAddress = "[email protected]";
// Add List of Email address to who email needs to be sent to
private static final String[] emailList = {"[email protected]", "[email protected]"};
public static void main(String args[]) throws Exception
SendMailUsingAuthentication smtpMailSender = new SendMailUsingAuthentication();
smtpMailSender.postMail( emailList, emailSubjectTxt, emailMsgTxt, emailFromAddress);
System.out.println("Sucessfully Sent mail to All Users");
public void postMail( String recipients[ ], String subject,
String message , String from) throws MessagingException
boolean debug = false;
//Set the host smtp address
Properties props = new Properties();
props.put("mail.smtp.host", SMTP_HOST_NAME);
props.put("mail.smtp.auth", "true");
Authenticator auth = new SMTPAuthenticator();
Session session = Session.getDefaultInstance(props, auth);
session.setDebug(debug);
// create a message
Message msg = new MimeMessage(session);
// set the from and to address
InternetAddress addressFrom = new InternetAddress(from);
msg.setFrom(addressFrom);
InternetAddress[] addressTo = new InternetAddress[recipients.length];
for (int i = 0; i < recipients.length; i++)
addressTo[i] = new InternetAddress(recipients);
msg.setRecipients(Message.RecipientType.TO, addressTo);
// Setting the Subject and Content Type
msg.setSubject(subject);
msg.setContent(message, "text/plain");
Transport.send(msg);
* SimpleAuthenticator is used to do simple authentication
* when the SMTP server requires it.
private class SMTPAuthenticator extends javax.mail.Authenticator
public PasswordAuthentication getPasswordAuthentication()
String username = SMTP_AUTH_USER;
String password = SMTP_AUTH_PWD;
return new PasswordAuthentication(username, password); -
I'm getting the message -50 error when i try to export my project on iMovie '09. What does this mean??
Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
free space on internal boot hard disk? How much ?
Video codec
streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
in what format ? .jpg, .bmp, .tif, else ?
Audio
from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
iMovie/iDVD preference file
The "com.apple.iMovie.plist" file or "com.apple.iDVD.plist"
Many users has not observed that there are TWO libraries.
_ Library - at root level
_ Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
Where do Your material come from
Camera
External hard disk
USB-memory
And all are connected so that iMovie can find it ?
from: jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
from Karsten S
Shorter clips than 1,5 sec might be one of the culptrits
Bengt cont.
Set-Up might differ
Mac OS - most probably X.7 or more
iMovie version - more than iM'11 v. 9.0.4
Action taken
Finalizing project - I never do as I never understood the gain to do so
Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
fps - set - I only use PAL (25fps)
Yours Bengt W -
Why am I getting an ORA-04052 error when I try to compile a Procedure?
Hi,
The following procedure I'm getting an ORA-04052 error when I try to compile the following procedure.
CREATE OR REPLACE PROCEDURE APPS.Find_String (
pin_referenced_name IN dba_dependencies.referenced_name%TYPE)
IS
cursor cur_get_dependancy
is
SELECT distinct owner, name, type
FROM [email protected] -- prod.world
WHERE lower(referenced_name) = lower(pin_referenced_name) --'ftbv_salesrep_all_1d'
AND referenced_type <> 'SYNONYM'
AND owner <> 'SYS'
order by name;
v_owner varchar2(40);
v_name varchar2(50);
v_type varchar2(40);
BEGIN
dbms_output.put_line(upper(pin_referenced_name)||' is found in the following objects.');
dbms_output.put_line(' ');
dbms_output.put_line(RPAD('OWNER', 30, ' ')||RPAD('NAME', 60, ' ')||RPAD('OBJECT TYPE', 30, ' '));
dbms_output.put_line('-------------------------------------------------------------------------------------------------------------------');
FOR i IN cur_get_dependancy
LOOP
v_owner := RPAD(i.owner, 30, ' ');
v_name := RPAD(i.name, 45, ' ');
v_type := RPAD(i.type, 30, ' ');
dbms_output.put_line(v_owner ||v_name|| v_type);
END LOOP;
END find_string;I'm using the link [email protected]. The procedure compiles for other database links used in the cursor including the one commented to the right of the code 'prod.world'.
What's even stranger is that I took the SELECT statement
SELECT distinct owner, name, type
FROM [email protected] -- prod.world
WHERE lower(referenced_name) = lower(pin_referenced_name) --'ftbv_salesrep_all_1d'
AND referenced_type <> 'SYNONYM'
AND owner <> 'SYS'
order by name;out of the procedure and ran it on the command line using the @pinp.world link, the SQL statement ran just fine. But when I tried to compile the above procedure with that exact same SQL statement with the exact same link I get the following string of errors.
ORA-04052: error occurred when looking up remote object [email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-02068: following severe error from PINP
ORA-03113: end-of-file on communication channelHow can the link work just fine in a regular SQL statement but then cause an error when its compiled in code that otherwise compile just fine when using any other link or even just a plain database. Does anyone have any suggestions?OK Justin,
Here's the query by itself run in another database using the @pinp.world link and querying the dba_dependencies table in the pinp.world database. As you can see the query using this link works just fine returning the requested rows. I can't figure out why the compiler is having an issue with essentially this same query when I try to compile it in a cursor in TOAD. Also this is the database (dev1.world) that I'm trying to compile this Procedure in.
By the way I'm in an Oracle 9.2.0.6 database and TOAD v9.2.
SQL> conn apps/apps1@dev1
Connected.
SQL> SELECT distinct owner, name, type
2 FROM [email protected]
3 WHERE lower(referenced_name) = lower('ALL_USERS')
4 AND referenced_type <> 'SYNONYM'
5 AND owner <> 'SYS'
6 order by name;
OWNER NAME TYPE
PUBLIC ALL_USERS SYNONYM
XDB DBMS_XDBUTIL_INT PACKAGE BODY
XDB DBMS_XDBZ0 PACKAGE BODY
SYSTEM MVIEW_EVALUATIONS VIEW
SYSTEM MVIEW_EXCEPTIONS VIEW
SYSTEM MVIEW_FILTER VIEW
SYSTEM MVIEW_LOG VIEW
SYSTEM MVIEW_RECOMMENDATIONS VIEW
SYSTEM MVIEW_WORKLOAD VIEW
ORASSO WWCTX_API PACKAGE BODY
PORTAL WWCTX_API PACKAGE BODY
ORASSO WWEXP_UTL PACKAGE BODY
PORTAL WWEXP_UTL PACKAGE BODY
PORTAL WWPOB_API_PAGE PACKAGE BODY
PORTAL WWPOF PACKAGE BODY
ORASSO WWPRO_PROVIDER_VALIDATION PACKAGE BODY
PORTAL WWPRO_PROVIDER_VALIDATION PACKAGE BODY
PORTAL WWSBR_EDIT_ATTRIBUTE PACKAGE BODY
PORTAL WWSBR_FOLDER_PORTLET PACKAGE BODY
PORTAL WWSBR_USER_PAGES_PORTLET PACKAGE BODY
ORASSO WWUTL_API_PARSE PACKAGE BODY
OWNER NAME TYPE
PORTAL WWUTL_API_PARSE PACKAGE BODY
PORTAL WWUTL_EXPORT_IMPORT_LOV PACKAGE BODY
ORASSO WWUTL_LOV PACKAGE BODY
PORTAL WWUTL_LOV PACKAGE BODY
PORTAL WWV_CONTEXT PACKAGE BODY
PORTAL WWV_CONTEXT_UTIL PACKAGE BODY
PORTAL WWV_DDL PACKAGE BODY
PORTAL WWV_GENERATE_UTL PACKAGE BODY
PORTAL WWV_GLOBAL PACKAGE
PORTAL WWV_MONITOR_DATABASE PACKAGE BODY
PORTAL WWV_PARSE_AS_SPECIFIC_USER PACKAGE BODY
PORTAL WWV_PARSE_AS_USER PACKAGE BODY
PORTAL WWV_SYS_DML PACKAGE BODY
PORTAL WWV_SYS_RENDER_HIERARCHY PACKAGE BODY
PORTAL WWV_THINGSAVE PACKAGE BODY
PORTAL WWV_UTIL PACKAGE BODY
PORTAL WWV_UTLVALID PACKAGE BODY
38 rows selected.
SQL>Let me know what you think.
Thanks again. -
"Unauthorized Host" error when you try to connect to the admin server
"Unauthorized Host" error when you try to connect to the admin server
<p>
If you see this error message when you try to connect to a Netscape
administration server:<P>
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------<P>
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.<P>
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:<P>
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.<P>
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.<P>
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).<P>
</OL><P>
For Commerce Server or Communications Server (1.x) on Windows NT:<P>
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".<P>
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".<P>
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.<P>
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.<P>
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.<P>
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.<P>
Once you have access to your administration server, you can try again to
set up the access controls you want.<P>
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.<P>
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.<P>
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.<P>
</UL><P>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.<P>"Unauthorized Host" error when you try to connect to the admin server
<p>
If you see this error message when you try to connect to a Netscape
administration server:<P>
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------<P>
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.<P>
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:<P>
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.<P>
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.<P>
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).<P>
</OL><P>
For Commerce Server or Communications Server (1.x) on Windows NT:<P>
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".<P>
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".<P>
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.<P>
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.<P>
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.<P>
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.<P>
Once you have access to your administration server, you can try again to
set up the access controls you want.<P>
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.<P>
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.<P>
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.<P>
</UL><P>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.<P> -
"unknown error" when I try to update my ipad
I get an "unknown error" when I try to update my ipad... no problem signing on at the website from a desktop, but can't update any programs or purchase any new ones in the apple store.
Go to Settings>Store >Apple ID, tap your ID and sign out. Then reboot the iPad, Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Then go back to Settings>Store>Sign in and sign in again and see if the apps will update.
Maybe you are looking for
-
Error while updating the records through a DB link
Hi , I am getting the below error while updating around 15 thousands records, i suspect it to be timeout but not sure.Please can you let me know what solutions needs to be taken. Not Found The requested URL /pls/htmldb/wwv_flow.show was not found on
-
''please stick with your original questions thread about Crystal Report - https://support.mozilla.org/en-US/questions/970077 - locking this thread''l When i unistall and again install a fresh Crystal report for .Net 4.0 Its ok to generate only to pdf
-
Media Encoder 5.5 Windows 7 - Only see 4 export formats
Windows 7 Media Encoder 5.5.1.12 I only see 4 export format in export settings FLV F4V H.264 MP3 ALL other formats are not displaying. What should i do? I ran the update and still only 4 formats. I am trying to encode a Windows Media file and WMV is
-
Can i Change How the Remote Chooses a Button?
I'm working in iDVD 08 and I've got three buttons in a menu. I'm using a the Center Stage theme and I have removed the drop zones. Anyways I have three buttons on this menu one in the middle right, middle left, and the bottom of the screen forming li
-
I forgot my password for my Macbook Air!!
Please help i have changed my usual password and i cant remember my new password for my mac!