General Error when trying to edit video

I'm trying to put together a short video in Final Cut Express and whenever I try to view clips in the viewer an error message pops up that says "General Error." I click OK and another message pops up that says "Error: Out of Memory." This is a very small project and there should be no issue with Memory. I have about 1.5 GB of footage and there is about 25GB of space on the hard drive. I originally had the clips on an external USB harddrive, but I thought that extra step in the process was causing the error, so I put the footage on the desktop.
Please help!

The fact that it's a USB external drive shouldnt really matter at this point as I copied all of the videos onto the desktop and disconnected the external drive.
As for the still images, I haven't been able to put anything in the timeline as of yet. The only way I can get something in there is if I drag the entire clip to the timeline, render the whole thing (huge time waster) and then cut it that way. I have the time code for the clips written out where I want to edit it so I'd really like to be able to edit it the normal way.

Similar Messages

Java error when trying to edit file - access denied

We have been running Vibe 3.0 for a couple years with no issues but suddenly users have begun to get java errors when trying to edit a file from Vibe. When a file entry is opened and the "Edit this file" link is clicked, a dialog pops up that says :
Error from command:
java.security.AccessControlException: access denied (java.io.FilePermission <<ALL FILES>> execute)
Has anyone else seen this? Could it be related to some windows security update perhaps? Any ideas how to resolve would be appreciated. This happens with regular users as well as admin.
Vibe is running on SLES 10 with mysql. We are using IIS Windows Authentication.
Thanks

dangross,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Error when trying to edit page

I get the following error when trying to edit an asp page
"The operation could not be performed because a problem
occurred while attempting to connect to the server. Please check
your internet connection and try again. For more details, please
visit the Incontext Editing Support Center."
If I try and duplicate the page I get:
"The page you are trying to edit or duplicate was loaded with
and error from the server.
Solution: Contact your web developer to correct the problem.
For more details, please visit the Incontext Editing Support
Center."

There is a test page here:
http://www.markthomasinfo.com/testice.asp.
I can't edit this file and get the errors I put in my first post in
this thread when I try and do so. I get the same errors with any
ASP file I try and edit.
I can however edit this simple html file successfully:
http://www.markthomasinfo.com/testincontext.html
The ASP page is very simple, here's the code:
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml"
xmlns:ice="
http://ns.adobe.com/incontextediting">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=UTF-8" />
<title>Untitled Document</title>
<script src="includes/ice/ice.js"
type="text/javascript"></script>
</head>
<body>
<p>TEST ASP FILE</p>
<div ice:editable="*">Content for new Editable Region
goes here</div>
</body>
</html>

413 error when trying to download video

I and some of my customers are seeing 413 errors when trying to download on-demand videos. The Googling I did before posting here all say to make changes to the Blackberry Enterprise Server to fix the problem, but the customers experiencing the problem are personal users, not corporate.
Is this something I need to take up with the cellular carrier the Blackberrys were bought from, or there something I can do on the phone itself to resolve this issue?

HTTP error 413 request entity too large
This indicates that the web page is too large to be accessed.
The maximum data amount permitted per connection setting in the BlackBerry® Mobile Data System (BlackBerry MDS) Connection Service is set to a lower allowable kilobyte level than required by the web page requested by the BlackBerry smartphone user.
Resolution:
Change the value of the maximum data amount permitted per connection setting by completing the following steps:
BlackBerry Enterprise Server 4.1
Open BlackBerry Manager.
On the left pane, click MDS-CS service.
On the right pane, click Edit Properties.
In the General section, click Flow Control.
Change the Maximum KB/Connection field from the default setting of 256Kb to 1024kb.
Restart the BlackBerry MDS Connection Service to enable the settings to take effect.
BlackBerry Enterprise Server 5.0
Open the BlackBerry Administration web site.
On the left pane, under BlackBerry Solution topology, expand the BlackBerry Domain menu.
Under the Component View, expand the MDS Connection Service, and then click the name of the MDS-CS service.
On the right pane, click General.
In the General section, select Edit Instances at the bottom of the page.
Change the Maximum data amount permitted per connection (KB) field from the default of 1024kb to a value greater than the size of the page that is being requested.
At the bottom of the page, click Save all.
Restart the BlackBerry MDS Connection Service to enable the settings to take effect.

Error when trying to edit post

This may be an anomaly, but I received this message when trying to edit a post:
Error
An error has occurred. We apologize for the inconvenience.
Useful links:
Forum Home -- browse the forums here.
Search Forums -- visit the search page to query all forum content.
The message repeated upon re-trys.
Barry
Message was edited by: Barry Hemphill

Hi Barry
Me as well, yesterday, to the point time was up
& not able to edit ,as if 15 mins up but it had been
well under 4-5 mins, every retry same results.
Has not happened today , but this only my 4th post.
Eme
Message was edited by: Eme~~ my post count looks off,
but not I'am not tracking anymore.

I get "General Error" when trying to playback unrendered video, and when trying to export to my desktop and I'm not sure why.

I import video footage into Final Cut Pro 7, added some effects like motion blur and colour correction, and cannot playback the video whilst it is not rendered. I click the play button but it just says "general error". This also happens when trying to export to my desktop "general error" once again. Does anyone know what is going on?
My RT settings are:
Safe RT or Unlimited RT (I get the error on either setting)
Framerate & video quality - Dynamic
27" iMac i7 @ 3.4GHz
4GB Ram
2GB Radeon 6970m

Hmmmm it seems to be just that file. The rest of my files are fine. I tweaked some settings and tried other files and it worked, so maybe it was just me, I am very new to Final Cut after all. Turns out I'm OK now! Thanks anyway!

'general error' when trying to get clip from browser to viewer

I'm trying to put together a short instructional video (a kind of 'quick intro' on what a particular website is all about).
Some clips in the video consist of screen captures (made with iShowU) while others are 'live' from a firewire camcorder.
There's no problem with the camcorder clips. All going according to plan there.
However, *when I try to get the screen grab clips from the browser to the viewer (to mark in/out points, etc), I get a 'general error' message followed in quick succession by an 'out of memory' message*. (I have 8GB ram so I'm sure memory's not the issue.)
I can drag the screen grab clips from the browser directly to a sequence in the timeline, but not to the viewer.
Neither quitting FCP nor logging out (and back in again) fixes the problem. (BTW, I'm working with a PAL setup on the camera and am capturing in PAL dimensions in iShowU, if this has any relevance here.)
I'm tearing my hair out... Maybe it's something very simple that I'm doing wrong? *Any ideas on how I might get the screen grab clips from the browser to the viewer?*
TIA.
Hugh

Sounds like iShowU may be writing a less-than-valid QuickTime file.
If you can successfully drag one of these items into the timeline, I'd drag it in and then File->Export->QuickTime Movie... checking the Make Movie Self-Contained box. If this works and you have a lot of clips you might try dragging them all into a timeline and then saving them as one big movie. Sounds like they're not that long so such an approach shouldn't get you into FCP performance problems.
Another approach would be to open each movie in QuickTime and do a Save As... with the "Save as self-contained movie" option.
Either way these will probably write a MOV file that FCP will be happy with.
Good Luck!
-Joe

Editing Error when trying to edit in Photoshop Elements

Hello all,
I received a strange error message when I tried to edit a photo in Photoshop Elements from Aperture. The message is as follows:
*"Editing Error*
*This image cannot be rendered for editing because Aperture does not support the image format."*
I've never received this message before and I find it strange that Aperture gives you Tiff and PSD with both regular and 16bit options only to tell you later that it doesn't support that format.
Any ideas why this might be happening?
I'm currently running 10.6, Aperture 2.1.4, and PE 6.0
Thanks in advance.
Best regards,
Jason
Message was edited by: celticmagick

This issue has been reported and acknowledged by Adobe at the bug reporting/feature request site. Please go there and add yourself to the long list of users experiencing the problem and vote on the thread:
http://feedback.photoshop.com/photoshop_family/topics/lr4_external_editor_failure
Also, the issue has been discussed at length in the following thread here in the forum. Towards the latter part of the thread, you can find some possible workarounds.
http://forums.adobe.com/thread/971432?start=150&tstart=0

Error when trying to edit in external editor in Lightroom 4

Hi all, need help please with Lightroom 4.
I have an external photo editor set up so when I choose "edit in" it goes to that editor, not photoshop. I am getting the following error "Unexpected error performing command: bad argument #1 to 'lower' (string expected, got nil)".
I have tried repairing and reinstalling the program to no avail. I have tried setting up a different program for the external editor, same problem.
This is working as it should in Lightroom 3.6.
Thank you for any help.
John Marrocco

This issue has been reported and acknowledged by Adobe at the bug reporting/feature request site. Please go there and add yourself to the long list of users experiencing the problem and vote on the thread:
http://feedback.photoshop.com/photoshop_family/topics/lr4_external_editor_failure
Also, the issue has been discussed at length in the following thread here in the forum. Towards the latter part of the thread, you can find some possible workarounds.
http://forums.adobe.com/thread/971432?start=150&tstart=0

Resource not found or internal server error when trying to edit location

Hi all,
ACS is appliance and version 5.2.0.26.7
The problem is after creating location under all locations.
When trying to click on the location name to edit location profile, there is an error page that shows
"ACS:Resource not found or internal server error"
But if click on the radio button and press the edit button at the bottom of page.
There is no problem.
Any on has the same problem?
Detail step and screen capture in attached file.

I can't find any CDETS that exactly match what you describe but up to patch 10 of 5.2 the follwoing CDETS related to NDGs are included:
CSCtx83260
NDG locations not showing up on GUI
CSCtu02752
ACS 5.2 patch 8 cannot display long lists of NDGs
CSCtu04594
ACS 5.2.0.26.7 - only 50 NDGs shown on GUI with more than 100 configured

Error when trying to edit layout

Hi all,
I'm using Oracle BI Publisher 11.1.1. I have a report with a standard layout - created via the layout wizard. The report is working fine but when i tried to edit the layout I receive the following error:
failed to load:io/designer/inline-preview-crosstab
I tried it with Google Chrome and IE8.
Any ideas?
Thanks in advance,
Alexander.

Hi Alexander..
Try the Following procedure:
1) Login to your weglogic server , under GCDomain -> Services-> Data sources-> one of a connection pool is not been able to allocate resources.
2) Under Connection Pool tab for that particular pool type increase the Maximum Capacity to +10-15% ,reason been your report is heavily loaded and save it.
3) After this under control tab it will show the respective server with overloaded issue (most likely BIP) perform -> Shutdown-> Clear Statement Cache -> Start
And then after this go the data source associated with this report , click on the xml and save the data for engine...
Run the report -> edit layout/report .
Let me know if it works for you.
Thanks

"Cannot Start Video Chat" error when trying to do video conferences

Ahoy!
I've recently upgraded to a new still camera that unfortunately doesn't work with iChatUSBCam, so I invested in a nearly-new iSight to use with my PowerMac G4 instead. Although one-way video chat conferences work fine, I keep getting the error "Cannot Start Video Chat" whenever I try to do a video conference.
The full error message reads:
"*Cannot Start Video Chat*
Your computer is not capable of initiating a multiperson video chat.
Click Text Chat to invite the selected people to chat."
There are no error codes or any other text in this message. The available buttons are the purple ?, 'Text Chat' or 'Cancel'.
I have tried this on both my 1.25ghz PowerMac G4 and my 1.33ghz PowerBook G4, and my friends I am trying to chat with have tried to initiate the conference on their 2.16ghz Intel Core Duo MacBook and MacBook Pro, only to receive the same messages too.
When doing a one-way videochat, the + button to add more people to the conference is greyed out for all of us as well. We all display the video conference button (camera with the extra pages behind it) next to our names on our buddy lists though, so our computers all believe we're capable of it!
When clicking the ? button on the "Cannot Start Video Chat" dialogue, it brings me to the help page that tells me:
+"To join a multiperson video conference, you need any G5 computer, or a 1 GHz single processor G4, or a dual processor 800 MHz G4, and a broadband connection to the Internet.+
+To host a multiperson video conference, you need any G5 computer, or a 1 GHz dual processor G4. In addition, you need an Internet connection that supports a minimum download bandwidth of 384 Kbps, and a minimum upload bandwidth of 384 Kbps."+
Both of my machines are above 1ghz G4s, so according to this help file, it shouldn't prohibit me from at least joining a conference when I'm not the host, but both of my Intel-based friends get the same message when trying to host as well. We are all on respectable Broadband or Cable internet connections, so that shouldn't limit it!
Anyone got any ideas what the problem is and how to fix it? I see no reason why this shouldn't work!
Thanks!

Hi
First have you all set the Quicktime streaming setting, goto sys prefs/quicktime/streaming/streaming speed, set to 1.5mbps(dont use automatic)
In ichats prefs click on video and change bandwidth limit to NONE.
Restart iChat.
Do a speed test on all sides and tell us the UP AND DOWNload speeds http://www.speedtest.net/
Tony

Iphoto gives me an error when trying to import videos

when trying to import a video into iphoto '11 - it gives me an error "cannot import selected photo as there was a problem downloading an image"

What's the source of the video? What format is it?

WWC-51000 - Portal Error When Trying to Edit Menu

I upgrade Webdb2.2 to Portal 30982 When I edit the menu and go to 'Menu Customization Form Text' I get:
Failed to insert menu My Menu (WWV-15100)
The preference path does not exist: Oracle.Portal.Mobile (WWC-51000)
The link it is trying to execute is:
http://hotsname:7778/pls/webdb3/WEBDB.wwv_menu_build.accept
What's the problem
PORTAL ERROR WHEN I TRY TO EDIT MENU WWC-51000

When I create a menu, I can go through the steps but when I get to the FINISH button I get:
The preference path does not exist: Oracle.Portal.Mobile (WWC-51000)
The preference path does not exist: Oracle.Portal.Mobile (WWC-51000)
The preference path does not exist: Oracle.Portal.Mobile (WWC-51000)

Server communications error when trying to edit a content query

Hi.
I get an error when I try to edit a content query for a placeholder in Workshop. I open a placeholder (in data->placeholders) and select "content search" in the content query box. The "Content Search" box pops up but I get an error requester ("Server Communications Error") saying "Content properties cannot be retrieved from the server".
I've ensured that the server is running and I've checked the server settings, but I haven't been able to find anything that would explain this error.
Any suggestions?
Regards,
Kjell V. Normann

From Workshop, in the Application tab, right-click on
wps-toolSupport.war under Modules, and select Set Context Path. Enter
${appname}Tool, ${appname} is the name of you application. Workshop
should use that context-root from then on, and then the placeholder
editor should be able to find the WebService it needs.
Greg
Kjell Normann wrote:
Hi.
I tried this, but it didn't work either. Upon redeployment it
actually removed the edited <module> section and replaced it with the
original:
<module> <web> <web-uri>wps-toolSupport.war</web-uri>
<context-root>wps-toolSupport</context-root> </web> </module>
Regards,
Kjell V. Normann

General Error when trying to edit video

Similar Messages

Maybe you are looking for