'general error' when trying to get clip from browser to viewer
I'm trying to put together a short instructional video (a kind of 'quick intro' on what a particular website is all about).
Some clips in the video consist of screen captures (made with iShowU) while others are 'live' from a firewire camcorder.
There's no problem with the camcorder clips. All going according to plan there.
However, *when I try to get the screen grab clips from the browser to the viewer (to mark in/out points, etc), I get a 'general error' message followed in quick succession by an 'out of memory' message*. (I have 8GB ram so I'm sure memory's not the issue.)
I can drag the screen grab clips from the browser directly to a sequence in the timeline, but not to the viewer.
Neither quitting FCP nor logging out (and back in again) fixes the problem. (BTW, I'm working with a PAL setup on the camera and am capturing in PAL dimensions in iShowU, if this has any relevance here.)
I'm tearing my hair out... Maybe it's something very simple that I'm doing wrong? *Any ideas on how I might get the screen grab clips from the browser to the viewer?*
TIA.
Hugh
Sounds like iShowU may be writing a less-than-valid QuickTime file.
If you can successfully drag one of these items into the timeline, I'd drag it in and then File->Export->QuickTime Movie... checking the Make Movie Self-Contained box. If this works and you have a lot of clips you might try dragging them all into a timeline and then saving them as one big movie. Sounds like they're not that long so such an approach shouldn't get you into FCP performance problems.
Another approach would be to open each movie in QuickTime and do a Save As... with the "Save as self-contained movie" option.
Either way these will probably write a MOV file that FCP will be happy with.
Good Luck!
-Joe
Similar Messages
-
I created a calculated column "Expiration Date" in SharePoint 2010 with formula, =IF([Contingent Hire]=TRUE,(Created+90),(IF([Contingent Hire]=FALSE," ")))
This works in the SharePoint list but when I go to edit the Edit Form in Designer. I get the error specified in the title of this post. I'm trying to make it so the Expiration Date is blank when another column, "Contingent Hire" (a YES/No
column) is FALSE.
The Edit Form is essentially a DataViewWebpart. If I remove the " ", like so, "(IF([Contingent Hire]=FALSE,))" from the calc column, the error goes away; however, the Expiration Date field does not
remain blank like I want it to.
Does anyone have any suggestions? (Below is the error generated when I open Designer and then try to open the Edit form for the corresponding list containing the calc column)
JackSki123Hi Jack,
Could you provide a screenshot about this issue?
As Dimitri suggested, you can install the update for your SharePoint Designer and check again.
And you can also check if you can display "NA" instead of " " in your calculated column per the following post.
http://rajeshspillai.blogspot.in/2012/03/server-returned-non-specific-error-when.html
Thanks
Daniel Yang
TechNet Community Support -
"Unknown error" when trying to get updates from App store...
Anyone else having trouble with the App store today? Trying to take in updates but get a "cannot be completed due to unknown error" huh? I've double/triple checked passwords etc, and they're free updates so I don't get it. Deleted apps and tried to re download, but no go..... Thoughts?
Thank you!Hi there. I had the same issue just now. Tried twice and fortunately the apps started to update as per normal. Unfortunately, i'm not able to view my "featured" page. Hv raised the same question just now.
-
Error when trying to run UCM from browser -The portal page for your Content
Hi
When I try and run the UCM in a browser using "http://localhost/idc", it showing
"The portal page for your Content Server needs to be rebuilt. Start the WebLayout Editor as a standalone application and select Update Portal... from the Options menu."
I did see a previous message that says to go to Weblayout Editor Applet - Options - Build Home Page - Update -Ok, but I was not able to see the Build Home Page option in the drop down.
Any ideas what may be causing this issue?
Thanks in advance for your help
Cheers
SylviaHi Srinath
Thanks for your reply.
Commenting out the following lines still does not fix my problem.
<div align=center><b>Welcome to UCM10g for SIF DEV</b></div><br>
<$if IsLoggedIn$>UserName = <i><$UserName$></i><br><$endif$>
<$if IsDynamic$>Current Time = <i><$dateCurrent()$></i>
<$else$>This is a static page.
<$endif$>
I have installed this product on two environments following the same kind format.
In our dev environment I am able to type in the following to get to the Welcome to Content Server Page
http://devenv/idc/
In the other environment I use the following and I get that the error "The portal page for your Content Server needs to be rebuilt. Start the WebLayout Editor as a standalone application and select Update Portal... from the Options menu."
http://testenv/idc
So the only way to get to the Content Server Page is to type the full path as below which I don't want to do, because I want the welcome screen to appear first.
https://testenv/idc/idcplg?IdcService=GET_DOC_PAGE&Action=GetTemplatePage&Page=HOME_PAGE&Auth=Internet
Is there a way I can configure the application to get to my welcome screen instead of getting the error message detailed above?
Thanks
Sylvia -
Started getting this error today (01/14/2014) when trying to download updates from the App Store for my MBAir 11" mid 2013. Error: NSURLErrorDomain error -1100
Are updates still available for OS below Maverick?That error may result from connecting to a cellular network via a phone or mobile broadband device. If that's what you're doing, try another network.
-
8008 Error when trying to download movies from iTunes
I've searched Google and the discussion boards but no one seems to have a fix for the 8008 error when trying to download movies in iTunes. I have the latest version of iTunes, my Mac Mini is up to date with all of it's patches, I've tried deleting the movie in the download folder and redownload the movie but I still get nothing. Does anyone have any suggestions for a fix?
Thanks,Morning pettis360,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error -50," "-5000," "8003," "8008," or "-42023"
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X: ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
Hope this helps,
Mario -
Error when trying to load data from ODS to CUBE
hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani....... -
Run time error when trying to import bookmarks from firefox
When trying to import bookmarks from Firefox to Safari I get the following error message: "Run Time Error. This application has requested the Runtime to terminate it in an unusual way." Safari does not function anymore and I have to close it. Can somebody help me? I am using a PC with Windows 7.
In the Bookmarks Manager (Library) there is a toolbar with the Back and Forward button and three other buttons (Organize, Views, Import & Backup).
* The first (gear) button is the Organize button with basic edit menu items for bookmarks
* The second button is the Views button that allows to change the sort order for viewing purposes (doesn't sort permanently).
* The third (star) button is the Import & Backup button that allows to backup and restore a JSON backup and import and export an HTML backup and import bookmarks from other browsers.
Hover each button to see the tooltip or click each of them to see what they do.
* https://support.mozilla.org/kb/how-do-i-use-bookmarks -
Error when trying to export excel from Chrom
Hi,
I get the following error message when i try to export the excel from Chrome browser. Has anyone encountered this error when trying to export from Chrome ? can you please give me the solution.
Thanks.
Error message:
To export a list, you must have a Microsoft SharePoint Foundation-compatible applicationHi,
From your description, when you export a SharePoint list to excel from chrome, you get an error.
In my SharePoint 2013, when I export a SharePoint list to excel from chrome, it works fine.
For your issue, make sure the excel client have been installed in your environment.
To narrow down the issue, I would like to confirm the following information:
To check whether the issue is related to the browser, I suggest you to do a test in other browsers, such as IE and compare the results.
What version is your office client? office 2013 or 2010? 32bit or 64 bit?
Besides, here are some similar posts, you can take a look at:
http://community.office365.com/en-us/f/172/t/160015.aspx
https://social.technet.microsoft.com/Forums/office/en-US/5ffbeb9e-6eb1-41c2-8141-edab6039bbde/to-export-a-list-you-must-have-a-microsoft-sharepoint-foundationcompatible-application?forum=sharepointadminprevious
I am looking forward to your reply back.
Best regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Error when trying to truncate table from within PL/SQL
Hello.....
Does anyone know why I get an error when trying to execute the following command from within PL/SQL?
truncate table event;
The error is as follows:
ORA-06550: line 20, column 14:
PLS-00103: Encountered the symbol "TABLE" when expecting one of the following:
:= . ( @ % ;
The symbol ":= was inserted before "TABLE" to continue.And as a DDL, it does a COMMIT just before it runs. Whether you want a COMMIT or not.
And with all the locking and serialization issues associated with a DDL. -
Propagation error when trying to download inventory from server
Hi there,
Has anyone seen the following error when trying to download an inventory from the server.:
Buildfile: C:\bea10.3\user_projects\workspaces\RST\RSTPropagation\21102009\propbuild.xml
import:
BUILD FAILED
C:\bea10.3\user_projects\workspaces\RST\RSTPropagation\21102009\propbuild.xml:39: The propagation servlet returned a failure response: The [Download] operation is halting due to the following failure: null
Additional Information:
The propagation servlet returned the following log information found in [C:\DOCUME~1\myuser\LOCALS~1\Temp\onlineDownload__D21_H11_M8_S11.log]:
INFO (Oct 21, 2009 11:08:11 AM SAST): Verbose logging has been disabled on the server.
INFO (Oct 21, 2009 11:08:11 AM SAST): The propagation servlet is starting the [Download] operation.
INFO (Oct 21, 2009 11:08:11 AM SAST): The modifier [allowMaintenanceModeDisabled] with a value of [true] will be used for this operation.
INFO (Oct 21, 2009 11:08:11 AM SAST): Validating that current user is in the Admin role...SUCCESS
ERROR (Oct 21, 2009 11:08:11 AM SAST): Validating that Maintenance Mode is enabled...FAILURE
ERROR (Oct 21, 2009 11:08:11 AM SAST): Maintenance Mode has not been enabled on the server. With Maintenance Mode disabled it is possible for users to modify the application. This may cause problems for propagation.
WARNING (Oct 21, 2009 11:08:11 AM SAST): Because the modifier [allowMaintenanceModeDisabled] was enabled this validation failure will be ignored and the operation will proceed. However, users will still be able to make modifications to the application, which could lead to missing data and unexpected propagation errors.
WARNING (Oct 21, 2009 11:08:11 AM SAST): The temporary directory on the server used by propagation is [portal/bea10.3/user_projects/domains/RSTDomain/servers/wl_nstf/tmp/_WL_user/RSTEar/7v9j6d/public] with a length of [99] bytes. It is recommended that you shorten this path to avoid path length related failures. See the propagation documentation on how to specify the inventoryWorkingFolder context-param for the propagation servlet.
INFO (Oct 21, 2009 11:08:19 AM SAST): Validating that LDAP and RDBMS security resources are in sync...SUCCESS
INFO (Oct 21, 2009 11:08:19 AM SAST): Writing the inventory file to the servers file system at [{0}].
ERROR (Oct 21, 2009 11:08:23 AM SAST): The [Download] operation is halting due to the following failure: null
Total time: 14 seconds
Please let me know if you have any ideas because "The [Download] operation is halting due to the following failure: null" means nothing to me.
Please note changing the maintenace mode makes no difference.Please enable Verbose Logging on the propagation servlet
http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/prodOps/propToolAdvanced.html#wp1071690
and check the logs on the server, they might give a clue -
Error when trying to migrate project from labwindows 2010 SP1 over to VS2008
I'm sure I've been successful back with this when running CVI 8.5 and VS2003 / 2005, but I keep gettin the following error when trying to do this with my current configuration. What am I missing?
See attached image
Regards
Gavin
Attachments:
CVI-VS error.JPG 29 KBNot recently, but what I would say is that CVI 2010 SP1 was installed after my VS2008 installation, so it ought to be in the right order.... When I get a moment I'll reinstall the CVI runtime and see what happens. Its not critical that I get this fixed, as the project in question is so small, and as the important parts are almost competely ANSI C, it should be really easy to reconstruct in C# anyway. I'll let you know what happens anyway
-
Have a problem importing my photos to iphoto '11. Keep getting an error message. Tried deleting some photos from iphoto as well as my camera, but it didn't help. Can anybody tell me why this is happening?
what happens when you use Image Capture (in your applications folder) and see what happens
LN -
Getting an error when trying to download music from Family Sharing
My husband & I are signed up for family sharing. When I try to download any of the music I get this error, "This device is already associated with an Apple ID. If you download past purchases with your Apple ID, you cannot auto-download or download past purchases with a different Apple ID for 90 days."
What does this mean & how do I correct it?Howdy mrscaskin,
Welcome to Apple Support Communities.
It sounds like you recently setup Family Sharing and are seeing an alert when trying to download a past purchase from the iTunes Store. The article linked below will explain the alert you’re seeing and provide information about using Apple IDs with multiple devices.
iTunes Store: Associating a device or computer to your Apple ID
When you turn on iTunes Match or Automatic Downloads, or when you download past purchases on an iOS device or computer, that device or computer becomes associated with your Apple ID. Your Apple ID can have up to 10 devices and computers (combined) associated with it, with a maximum of 5 computers at any time. Each computer must also be authorized using the same Apple ID. Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days. You can view which devices or computers are currently associated with your Apple ID, remove unused devices or computers, and view how many days remain before the devices or computers can be associated with a different Apple ID from the Account Information page in iTunes on your computer:
Open iTunes.
Sign in to your Apple ID by choosing Store > Sign In from the iTunes menu.
Choose Store > View My Account from the iTunes menu.
From the Account Information screen, click Manage Devices.
Next to each device or computer name, you will be able to see when each device or computer was associated with your Apple ID. You will also be able to track how many days remain before your associated devices or computers can be associated with a different Apple ID.
I hope this helps.
-Jason -
I import video footage into Final Cut Pro 7, added some effects like motion blur and colour correction, and cannot playback the video whilst it is not rendered. I click the play button but it just says "general error". This also happens when trying to export to my desktop "general error" once again. Does anyone know what is going on?
My RT settings are:
Safe RT or Unlimited RT (I get the error on either setting)
Framerate & video quality - Dynamic
27" iMac i7 @ 3.4GHz
4GB Ram
2GB Radeon 6970mHmmmm it seems to be just that file. The rest of my files are fine. I tweaked some settings and tried other files and it worked, so maybe it was just me, I am very new to Final Cut after all. Turns out I'm OK now! Thanks anyway!
Maybe you are looking for
-
Can some one help me with diagnostic test result " apple mobile device driver not found"?
I bought an iPhone 4gs 32gb from Singapore. iso 4. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone. I had tried to troubleshoot it by rein
-
How do I go back to an earlier version of I-tunes?
-
I just upgraded to 3.2. When I make a series of adjustments in the develop module, the adjustments do not carry over to the library module. This did not happen with 3.0. In 3.0, the most recent adjustment made would be how the image would appear in t
-
The reproduction counter does not work correctly
the reproduction counter does not work correctly
-
Migartion of older version of Business Objects to XI R3
Hi Experts, <<Text removed by moderator>> Also need to know about how to create windows AD security or how to move users from enterprise to windows AD security group. Awaiting replies asap. Regards Rohit Mathur Edited by: Matt on Dec 6, 2010 10:18 AM