General experiences from ehp3 to ehp4

We are considering the move from ehp3 to ehp4 pending some input and consent from our business units.
Our issue is that applying ehp3 was very "painful". It took a long time and was technically very challenging. We have since had turnover in our SAP system administration team and have a very thin team both in numbers and experience.
Consequently, we were wondering in general terms what we might expect based on others experience. Both in terms of time to prepare and implement.
We have been doing some preliminary investigation into this issue and are aware of then necessity to completely understand the EHP installer and Solution manager integration, but are also interested in any other practical "lessons learned".
We have read many "official" claims of reduced effort and downtime, but have also heard of actual implentations that aren't exactly in line with these expectations.
So again, any general review would be a great help!
thanks,
Jeff Henke
We-Energies

Hello,
We also had a lot of problems with EHP3, especially with very long elapse times to implement all the patches via SPAM/SAINT.
EHP4 however went very smoothly, EHP4 uses the EHP installer which limits the downtime significantly (downtime only 5 hours in our case).
What I always recommend is the following link :
http://service.sap.com/erp-ehp
Especially the document "Must Know", explains very well the lifecycle of the EHP installation, from preparation phase to implementation phase.
The document also contains very interesting SAP Notes and also explains how the Solution Manager MOPZ should be used and configured.
Preparation is the key factor in a successfull EHP implementation, this document is a good starting point.
Success !
Wim

Similar Messages

ESS Business Packages Migration from Ehp3 to Ehp4 with Custom Changes

Hello All,
We are using ECC 6.0 With Ehp3 and We have the following versions of ESS and MSS Business Packages Installed.
SAP_ESS 603 SP4
SAP_MSS 600 SP15
We have NWDI server also installed in this and made some Customizations in ESS Webdynpro Java based applications.
We have freshly installed a new portal development server with Netweaver 7.0 Ehp1 to cleanup unneccessary stuffs in our existing development portal server and pointed to the upgraded backend ECC 6.0 Ehp4.
The NWDI also installed freshly in the new server.
While upgrading, following Business Packages versions are recommended by SAP.
SAP_ESS 603 SP6
MSS 600 SP17
PCUI_GP 603 Sp 06
Now in the New portal server every applications works fine as delivered Out of the box and we are missing all the Webdynpro Java customizations which we have made as part of the Ehp3 based ESS Implementation.
We are in the process of Creating the New track in the New NW 7.0 Ehp1 server and import the .SCA files.
My Question is how can we get the automatic migration process, so that the Webdynpro Java Customizations which we have done in the Previous track in Ehp3 with different ESS SP level can be carry forwarded to our New NWDI Server.
How can we go ahead?. We are thinking of the following options and your suggestions are highly appreciated.
1. Import the .SCA files related to Ehp4 and do the Webdynpro Java changes manually again in the DCs of Newly created track    in the New NWDI server.
2. Is there a way to migrate a Track from One Server to another NWDI server with the Custom changes carry forwarded.
What are all the possible ways to achieve track migration to the new server with custom changes carry forwarded.
Appreciate your valuable inputs in this.
Thanks and Regards,
Sekar

Hi Sekar,
There is a cook book provided by SAP as attachment of note 872892. you can follow the process to have your custom DC's migrated to new Support pack of ESS/MSS.

Going from EHP3 to EHP4

Experts,
We already have ECC6.0Ehp3. After installing EHp3, we activated 2 business function sets in SFW5 and followed the normal processes to get this moved into the other clients. No problem!
That was many months ago. now, we are ready to do Ehp4 and that is my question.
Knowing that we are already on EhP3 and have already activated business function sets, eg ISU_UTIL_1 / ISU_UTIL_WASTE, etc.
So once we finished the install of EhP4 via the Enhancement Pack installer, will we need to go back to SFW5 and activate business function sets again? We already have all the functionality we need from when we did the SFW5 after EHP3 install, I don't want to activate anything new, but I wonder if that is a requirement when going from one EHP to a new one? If so, how do we keep from overwriting the config we already have?
I have fully read the following guides:
Note 337623 - Customizing after installation or upgrade
The specified item was not found.
https://websmp202.sap-ag.de/~sapidb/011000358700000931872009E.PDF
https://service.sap.com/erp-ehp
https://service.sap.com/ehp-inst
But I still don't have an answer from these. Any insite would be much appeciated.
Thanks,
Nick

Hey Sunny,
Thanks again for following up, but I have seen this and fully read the note. Let me be more specific:
Is there any one out there who has applied a previous ECC Enhancement Pack (like EHP3, then activated a business function set in SFW5 (like IS-util), then copied the customization to all clients....and THEN at a later date applied EHP4 ???
If so, after applying EHP4, did you AGAIN have to go into SFW5? If not SFW5, did you have to use SCU0 to find additional features from existing business sets in client 000 and again copy that into the productive clients?
I know what the ambiguous documentation says, but when it comes down to REALLY doing this, I am still not clear. Please don't bother cutting/pasting sections from the tech guide and SAP note I have already referenced in a previous post. I have ready them....
Maybe I'm over-thinking this.....
Also, what if I wanted to activate a complely new business function set? After activating in SFW5, has anyone done this in a way that copies the new functionality in 000 but does not stomp on the previous customization from other activations?

Enhancement from EHP3 to EHP4

Hi All,
We are currently on Enhancment Package 3 and doing full implementation of Travel Management Module with Language Support.
To maintain the translations the changes are made to SAP Standard objects like -
OTR Packages - PTRM_WEB_UI , PTRM_WEB_POWL
Classes - CL_FITV_TEXT
Data Elements etc..
I want to know whether the changed translations will remain when the EHP4 will be applied.
Please provide valuable pointers.
Thanks and Regards,
Indu

Hi Karthik,
Thanks for the reply.
The point that i got from your reply is that if SAP enhances those objects for which we have done some customizations or changes then applying the package will overwrite those changes. Am i correct ?
Is there any program that we can run to avoid overwriting of objects ? I have heard about transaction spdd. Is this of any help.
I am actually more concerned about future since the system will surely be upgraded and then there will be chance to lose all the changes done for translations.
Thanks and Regards,
Indu

I bought an new ipad 3rd gen 16 gb wifi cellular in may 2012. I hv a unique problem wherein the screen of ipad is not as smooth as what is general experience. Its not buggy but lacks smoothness and finger doesnot glide as smoothly . Can anybody help.

i bought an new ipad 3rd gen 16 gb wifi cellular in may 2012. I hv a unique problem wherein the screen of ipad is not as smooth as what is general experience. Its not buggy but lacks smoothness and finger doesnot glide as smoothly .Can anybody help.

Do you clean your iPad screen? Do not use standard window cleaners, with ammonia or alcohol, like Windex, but a damp towel, followed by a micro-fibre cloth is recommended. There are also cleaners you can buy which are specifically designed for iPad/iPhone devices, such as iClean from Monster.

General hierarchy from SAP R/3 to SAP CRM

Hi experts,
I want to know if it is possible to bring the general hierarchy from the R/3 (transaction MCK3) to the CRM system.
Thanks for your help in advance!
Anne

Hello Anne,
we are facing the same issue. We have a customer hierarchy in ECC that has been structured as a general hierarchy, rather than the normal KNVH. We want to map that somehow to CRM.
Initial solution outlines:
1) create a custom program that converts the general hierarchy to a normal customer hierarchy in KNVH, then use the standard program to download that to CRM account hierarchies
2) create a custom program to map the general hierarchy to CRM (to some structure)
Can you please tell how you covered your need?

Report "General Ledger from the Document File" - Cumulative balance

Hi!
When I start the report "General Ledger from the Document File" (transaction S_ALR_87100205), I get a list of documents with no obvious default sort order criteria (I can see at glance that document numbers and posting dates are not sort criteria). This makes the cumulative balance column completely useles.
Since the cumulative balance is carried from one row to another, standard sorting functionality for the already produced list makes no sense.
There should be a way to affect the sort order in program <b>before</b> cumulative balance calculation, or at least to find it out.
Is there a way to acomplish this?
Thanks!
Regards,
Igor

In the output control section there is a button called configure. Select a variant. Select configure. Save the sort order and report definition the way you want it. Name a new variant. Now go back and run the report with your variant.
pls assign points if helpful as a way to say thanks.

I bought music "The Wall (Deluxe experience)" from my iPhone and there is a video included I could not get.

I bought music "The Wall (Deluxe experience)" from my iPhone and there is a video included I could not get.

Hey fernandoediaz,
Welcome to the Apple Support Communities. You can easily download any previous purchase from your iPhone. The following article will sort you out.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Open the iTunes Store on your device.
Make sure you are signed in with the same Apple ID used for the original purchase.
Tap More from the bottom navigation bar.
Tap Purchased to go to your Purchased page.
This will get you in the right place, then check your videos app on your device and you
Regards,
-Norm G.

I'm a recently transformed "Windows to Apple" user, and I need to run various Windows software. Before installing Windows, I would like to hear from experiences from users if it works well.

I'm a recently transformed "Windows to Apple" user, and I need to run various Windows software. Before installing Windows, I would like to hear from experiences from users if it works well. Also, I have an "Office for PC" that I need to re-download, however I was advised by someone that this software cannot be downloaded even if I had Windows in my MAC and that I will have to buy a new "Office for MAC" software. Thanks.

Yes, what you are looking at will work.
"Most of this would be for access to the shared folders which is not the same as RDP, correct? So i could
have myself connect from school to pull a word document, my friend connect from home to get the excel spreadsheet for our table top gaming, and my family connect to pull pictures from the shared folder on the server all at the same time. Because they
are accessing the shared folders it is not a RDP where they are accessing the server itself for administration."
This statement is correct. All of them would be able to be accessing the shared folders at the same time. This is the purpose of shared folders.
"the 1 user and RDP part is where I'm getting a little confused i think.
For the RDP part I thought that only applied to the server itself and not any of the client computers
connected to the server. So you are still limited to the 2 users to connect concurrently to the server or a client computer at any time?"
Sorry, not trying to confuse you. You mentioned to connect to a local machine at the same time. If you are staying away from RDP, then you won't have this issue. I would keep all shared folders on the server, not on any workstations.
You are correct 2 people can be RDP into a server at once. For client computers (workstations) you are limited to 1 person at a time. If you setup Anywhere Access correctly, then your friends and family should not need to RDP into a
client computer, they should only need to access the shared folders.
Something to keep in mind...for Anywhere Access to work, you will need to purchase a public certificate. You can do this from GoDaddy.com, Comodo or others. I would recommend either Godaddy or comodo. They make it easy and give plenty of instructions
on how to obtain the certificate. You will probably also have to purchase a domain name, and a static IP from your ISP. To fully do what you are looking at, it will take some out of pocket $$.

Technical news brought with EHP3 and EHP4 compared to ECC6

Hello,
I was looking through the release notes for EHP3 and EHP4.
But I'm unable to focus on the technical news. It is sorted by functional modules or industries.
Can someone provide me the main tehnical news (printing forms, abap codes, ..) that are included ?
Or do you know how I can find the technical improvements of these packages ?
Thanks in advance for your help

Hello,
Thanks for your help but those sites are more functional oriented.
I already knew the release notes, but the solution browser is really helpful.
I rather meant the technical tools like PDF forms for example
Are they improvements in the différent editors, or new methods to help coding.
Thanks in advance
Regards

EHP3 and EHP4 compatibiltiy

Hi All,
In my project, client had asked to work on EHP4, now the requirements have changed to install few reports in EHP3.
but there are some financial reports tht i have installed and loaded data and they are working fine in the BI system w.r.t EHP4.
Now I need to install some EHP3 Financial reports
Please respond if there will be any issues to have both EHP4 and EHP3 reports in the same BI system?
thnx
sneha
Edited by: Sneha Santhanakrishnan on May 12, 2010 9:58 AM

As I understood, EHP3 and EHP4 are two sorcxe system and you want to run the reports in the same BI box w.r.to these two source system. This can be done. There should not be a proble. You will be having two datasource that will corresponds to these two siurce syatem respectively.
Thanks.
Shambhu

Experiences from an new user

I've been using these forums for a while now, but haven't introduced myself yet.
After reading the 'Has the arch philosophy changed? No.' thread i felt it could be useful if i listed some of my experiences as a new arch user.
I have been working with computers as hobby from 1982, switched to x86 pc's around 1991 and learned a lot about Dos and hardware.
For the past 8 years i have been helping people with windows systems, and tried suse linux a few times, but felt it wasn't mature enough yet.
3 years ago i followed an education for MCSA and since then have been working as 2nd/3rd line helpdesk employee for a company that almost exclusively uses M$.
The more i learned about M$, the more trouble i had in getting it to do what i wanted, not what THEY wanted.
Early this year i decided to give linux a try again and installed suse linux 9.3.
Although it worked, and i could do almost anything i needed (except some windows games), it had far too many packages that i didn't want.
Several things i wanted to used were not in their collection, or had older versions that didn't work good enough.
Switching to newer versions meant i had to figure out a lot of dependency errors and solve them.
their packet management tool, yast2 had a lot of drawbacks, unless you used only their packages.
Also it was very tough to switch to another WM/DE .
Suse had automated so much in their configuration that it was far from easy to change things, unless you settled for the options the provided tools had.
The main difference with M$ was that the documentation is freely available and the accompanying tools were a lot better than the M$ tools.
I started looking for another distro, found distrowatch and read many of the articles about different distros.
Arch drew my attention, i quickly found the wiki and could see a lot of topics were covered in it.
I kept suse and windows in a multi-boot system, installed arch about 10 times over the next 3 weeks, asked a few questions on the forum, experimented for about a month with LVM and Raid, then made a final setup plan using FTP-install.
Now arch is the only OS installed on that pc, for M$ i use VMware, and i don't miss suse.
I estimate i have used AL approx 3 months now, and have learned more about linux in those 2months, than in the about 2 years (spread over 6 years or so) of using Suse.
Sofar i have stayed out of testing, but have used the AUR and even tried some modifications on an existing pkgbuild.
Soon i will be setting up a LAMP server on my former windows DC to gain experience setting up forums and wiki, and after that i probably will try to get my laptop runnning with arch.
I am very pleased with AL's speed and flexibility and have found the community to be helpful (although a bit slow sometimes).

I should state that the aforementioned thread brings up the point that (paraphrasing) you learn alot with arch, but after a while, you learn that things could be simpler.
I'm not saying I agree with it, and I find this thread here to be in nice contrast with that one.
My experiences are similar to your own, and while I understand what Dusty was saying, I still have yet to find a "simpler" distro which is akin to arch. Sure, automated stuff would be really nice, *if* you could override it, which is usually not the case.
Arch is a middle ground - between Slackware and (Suse/Fedora/Ubuntu). Some things are automated, but not such an extent that they become problems. Things which are automated can always be overridden.
That's what I like about arch. It generally works like one of the auto-distros, only you need a little more knowledge, and a little more time.
Lone_Wolf wrote:I am very pleased with AL's speed and flexibility and have found the community to be helpful (although a bit slow sometimes).
What? Slow how?

My KT3 Ultra Experience (from the nightmare to a running well system)

Well First...
I don't speak a well english, maybe because still think in spanish, so maybe find many gramatical errors.
the very very begin
The history begins with a terrible electric shock in my house, i got a Athlon XP 1700+ with a cheap PC Chips Board (810)..yeah the all in one board (video, modem, ethernet, sound) build my first system with a mixture of expectatives and dreams with my first AMD athlon XP , the system running well, before got the "great idea" to plug a Zoltrix Genie TV card for record South Park, everything is OK, so, i think that i abuse the luck, and a rainy night, i surf the net ( a XXX one... ATK... never forget that site after this) a electric shock enter trought the tv cable searching ground, someone that got this experience maybe feels a demon in a box, a white light come out from the back of the system and hit the isolated regulator ( with the sparks and all the stuff ) the light goes out and a tasty barbecue smell fill completly the room.
ohhh...
the list of cooking components:
   Athlon XP 1700+
   PC Chips 810 (a/v/r/s)
   Maxtor HDD 40GB
   Zoltrix Genie TV
   Mouse (generic)
   Keyboard (generic)
   Microsoft sidewinder gamepad
The miracle pieces:
   256MB DIMM sticks from crucial (PC 100) two of them
   External CD Burner HP CD-Writer 8230e (USB)
   Philips Monitor 17'
i learn to never watch a porno site in a rainy night... it's really bad for your system
build another system "da plan!"
in a trip to Bogotá i search in the computer mall called UNILAGO, the new system board, someone callit MOBO, my idea are this:
A Boxed Board. Candidates like ASUS , Gygabyte, MSI, with the VIA 333 chip are required.
we search in all the place, asus show its A7V333 model, but its too expensive in the price that this guy offered (maybe think that i don't search the pricewatch.com page before go to the mall... je je) in a place some guy show me a very nice box... i think the first impression counts, its the kt3 ultra board in her shiny box, next tactic ask for minimun price (...no minimun price got this board...) so i pay 360 thousand pesos for it.
wen come back to Cali ( the place i live) and after got some pesos in my bag i go to the computer mall in Cali called La passarella (remember the argentinian soccer player?) for buy the components.....
the list is this:
   Athlon XP 1800+ BOXED (got the original AMD heatsink)
   DDR RAM PC2100 256 MB
   Genius Netscroll Optic
   Genius Keyboard
   CD-Rom LG 52 X
   Case with a 300W ATX Power Supply
   Realtek Ethernet Card (Encore)
   AGP Video card with the SIS chip 315 128MB of ram
   Genius Maxfire USB (i buyit for the cheap price and anyway i don't play too much in a computer so i dont need a Nvidia Ti thing or a gamepad expensive)
wen go to the house, plug all the stuff and the process it's fine, no complicate things occur, i do two modifications first
1)to the AMD heatsink, the clip come in the other side, so i need to unplug the Power ATX supply for attach it and don't want to do the same thing every time that retire the heatsink, i disarm the heatsink and turn the clip to the other side, no problems with this mod...
2)i don't use floppy disks... I HATE IT so the place of the floppy converts in the place for the D-Bracket with all the lights and two USB... nice because i perfored the case in the right way and the usb and the lights come in the front of the case...it's a easy mod...
all the things come well so turn it ON...
KT3 Ultra first Round!
well i don' pay much attention in the first time that power on the system and hit the del key.... nothing happens and a letters of searching array and scanning devices show... after this process the amibios screen shows (the blue one, and still today don't find the option for change the color scheme like te PC Chips amibios options got) in this point i know that the rule "search the instruction booklet" it's totally necessary for many options the options that i disable and some that enable are this:
    in integrated peripherals disable the ata raid option (remember the scan devices screen?) i plug a maxtor ATA 100 hard drive to the ide cable because don't know if this hard disk works with the Raid Option maybe not because is ata 100.. so disable the option
    in power management options i activate the CPU critical temperature to 70°C
    in advanced bios settings i enable the MSI link to the future screen... nice, SMART for HDD enable. In the boot secuence put first CD-rom and later HDD
    in standard CMOS settings put the hour...(uh!), and obvious disable the nasty floppy drive (BOOT CDS REPLACE THE NEED OF FLOPPY DRIVES...)
    in PC health disable the intrussion option, because i don't have the switch for the case...
    in frecuency and voltage i find the FSB in 100Mhz but i don't change anything in this point...
after this tiny modification, i save the changes and restart....
the system boot with a CD he he... with a image of the win98 boot disk, so i formated and fdisk the drive... tooooo fast in this point.
after partition the HDD in 5 pieces and formating every partition, i reboot the computer for installing Win98...
the installation goes normal, and install all the MSI software (only for know what apps are appreciable por me) i don't have any problems, install all the drivers for every single hardware piece and the system works well... so testing es the next point.
KT3 Ultra first test after the installation
well i feel that my job are easyly...(ji ji) and all the process go OK so testing my new machine gotme like a child.
i run the test of SiS for the AGP card ( 3D thrill ) the demo of the card got a cosmic scene, comes very fast, i try to watch if someone piloting the space ship, and maybe see something
the sound are good for the include sound chip in the board, put and test all the effects and test...ok ok... nice.
microsoft direct X got some testings so i run it too ... write in run command "dxdiag" and ready for the tests, in this point i feel free to install a copy of "formula 1 2002" in the machine some guy borrowme a copy, wen i try to install got a n error.... (the first one) and the game don't install ... i reject the installation and try another game, in this point i search the Athlon XP Oem.bmp file for branding my new system... je je, and hit the window key and pause and i find that my processor runs in 1.1 Mhz... (what!!!) if this CPU is a 1800 and this speed maybe is wrong....so i read the boocklet and find in the FSB option the way for put the CPU in his real Mhz...(1.53) in this point begins the troubles...
KT3 Ultra damage my CPU??????!!!!!
Wen enter to the bios i got direct for the FSB option and put it to 133Mhz maybe this thing it's easyly too, i think, i made and save the changes... and.....
A BLACK SCREEN COMES AND I SEE THE FOUR LEDS IN RED!!!!
AHHHH!, i thinks that this processor pases to a better life after this point, with shaking hands read again the boocklet and find the interpretation for the 4 red leds signal, damage or bad installed processor.
oh, so what i do...?
i continue reading for a little FAQ in the boocklet, and nothing, only a glossary, i call a friend to helpme... ( the true geek one) the guy tell me to reset the bios with the jumper... so, i don't loose anything with this and do it...
wen the computer reboots the signals come to life... (ufff!) and the scanning device creen shows again... so i need to save again my settings.
i do all the things and save, the system turns on and windows 98 load normal again... i try to fix the FSB thing in other time i think, and continue intalling some programs.
In my CDs find a copy of formula 1 2001 no de 2002 version, because this version i installed in my other fried system i installed in mine for show and prove the 3d card...
the installation works fine and terminate ok, wen i hit the icon to play, the 3d settings window appears i select some options 800x600 32bit color and press test, a blank screen comes with some little caracters, in some point wen the test come back my system frozes and nothing happens... OHHHHHHH! what happens?.... i think, i decided to check the temperature values because in this point think that my installation fails in the put heatsink process.
i load PC alert and find CPU temperature in 78°C... oh, it's too high i think so shutdown the system and check the heatsink for anything that miss in the first time.
i put again the heatsink an log to the bios for check the values....
this is the values of PChealth option in bios:
   Cpu temp : 71°C and stable in this value...it's high too
   System Temp : 38°C ...high too
   VCore      1.744V
   +5.0V       5.038V
   +12V      11.923V
   -12V      -11.497
   -5V         -5.026V
   Batt      3.24V
   +5VSB      4.969
some ideas come to my mind and try to think if some options of the bios, the best performance option it's a good point to start i think so i select and save the changes...
oh, oh, the black screen comes again.... buuuuuu! and the four red leds too....buuuu!
mmmm, ....what i do?, what i do?....i reset again the bios, for the options and try to boot the machine again... maybe leave the system in the first point i think but nothing prepare me for the many "chorro" of errors thath follow after this point....
If i can roll back the time....
i think to be superman and fly in a oposite earth direction for roll back the time... (luisa!)
the system begins a non stop errors secuence sometimes the four leds are red, sometimes tree leds red an the top right led green, in the book says this signal is for damage DDR ram...
wen windows 98 loads the system frozes in some points, and wen enter and run some test the system frozes too...
i reset the bios to the original form an try to leave the house excactly wen enter the first time... i save it and the errors continues...
with NO hope of correct by myself the issues i turn on my old K6II system and find the MSI forum that got some mysql errors
in the forum find the Power unit suplly issues, i got the ATX box and 300W maybe it's too low i think after MANY post with same errors like me, i think to made a program plan for recover the stability and my ideas come in the next point.
now need another message to continue....

Return the system to the "normal" or less stability
In the forum (thanks for the people thath participate) some people says issues of frozen systems because cheap ATX power supply, some other got problems with the heatsink, i think that a mixture of those issues gotme like mad and try to figure out the quality of a atx power supply that changes the performance after a bios setup... ( it's a very cheap ATX power supply, i think) the Power unit now don't support the energy, and power needs of the system in some cases wen i run the 3d accelerated test the system frozes wen i hit "test".
return today to the computer mall passarella, and buy this items:
   Vulcano 7 (it's a building no, it's a airplane no,... it's vulcano 7 with speed sensor incorporated, much bigger than a building and more CFM than any airplane make!)
   ATX power supply 400W for kicks power requeriments and maybe extract energy enough for a reading lamp...
   wen come back to the house i install the new parts, the vulcano 7 needs the same mod than the other AMD one, or maybe MSI put the sockect A protect clip layer in the wrong site, maybe the board fit well in a ATX-XL case for no uninstall the power unit to put the heatsink... anyway need to uninstallit but this issue it's funny.
wen everiting it's ok i turn on the system...
KT3 Ultra Runs smooth... FINALLY
i know thath every body needs to listen a couple of help tips, in this point i think that logged to the forum are the best idea that i got, many people got the same problems and if you don't ask or search you think thath the MSI board it's a terrible board, and this no true, and because it's red too.
the system loads normal and i think to go up the FSB to the NORMAL 133 value for this athlon XP 1800+ i change the values, save and reboot the first thing that i find are the bios recognize the Amd Athlon XP 1800+ in the first black screen ( wen disables da logo) later, web hit windows key+ pause the window says Athlon XP 1800+, in the fuzzy logic app i find the values of 1523 Mhz and the temperature don't rises 50°C it's now OK, better than the cooking eggs thing that got before the changes.
now i need to give some thanks..
Thanks
to all the people in the forum, i don't write a nice english but i know read and it's enough for take a easy living style with this machines...
MSI people thanks
for the people in the mall, they don't know much the Power unit issues of this board it's a bit more exigent than others in his point.
to my dog that share my angry in the late night, it's a good one that dont' sleep well wen i work in the night..
so to all the people thanks for made this posible, maybe this long post with less technical things works for put your boards well.
Victor Hugo Hernández
Cali - Colombia

Microsoft experience from Apple's latest offering?

I seem to be getting it! Safari can't play ANYTHING from YouTube, or any other online video source. I get black screen with audio only.
Safari crashes about every tenth page I look at.
I used to use text edit to keep notes handy for current projects. Now it won't remember the previously opened docs no matter what preference settings I choose.
iTunes has to rebuffer every two minutes and I have Comcast Extreme 50Gbps service which is averaging about 29000Mbps in the last 10 tests I ran from both DSL Reports and Speed Test.
I punch in my password at start up and about 1 out of 3 times I have to re-enter it exactly the same way multiple times before it recognizes it.
This all reminds me of the lack of smooth operation I used to get when forced to use those windblows machines in school. I want my Mac user experience back! What happened Apple? No more product testing? No more quality control? Are you too big now to care if you provide a QUALITY product?
just a rant, feel free to flame or ignore, I don't really care at this point. I've followed all the advice I could find changing settings in more places than I care to count, installing reinstalling, uninstalling and rebooting more times than I want to remember, downloading new versions of every helper app I could find the smallest scrap of information on, all to no avail. It's like I have windows 95 on my machine. Slow. Buggy. Predictably unstable.
I hope this stops when I upgrade my hardware....again.
Message was edited by: MarkPBG

Something is seriously wrong with your machine, Safari is working fine here, and with most people I would imagine, some are bound to have issues but unless you are missing plugins I would say its time to do a hardware check and not blame Apple when its not actually their fault...Your rant will get you no help really, its not helping you, you don't tell anyone what measures you have taken and are just telling is its Apple, when I can assure you its now. Try posting again after holding your breath and tell people what's actually happening in detail and your steps to fix it.

Internal error while clicking on Candidate search from Recruiter role-EHP4

Hi
We are getting intrnal error while clicking on candidate search or any search option from recruiter log on after upgrading to EHP4.
after doing analysis through SLG1, we found below issues.
Serious error; see log
The error occurred in program CL_HRRCF_SEARCH_MASK_GROUP====CM009 line 41
Serious error; see log
The error occurred in program CL_HRRCF_SEARCH===============CM00P line 676
Serious error; see log
The error occurred in program CL_HRRCF_SEARCH===============CM00R line 18
Customizing table T77RCF_SPT contains no corresponding entry for Business Object =/
The error occurred in program CL_HRRCF_SPT_CUST_TABS========CM00E line 26
We searched in SDN and got one threads with similar kind of errors. As mentioned in the thread, we have activated below items.
1. HCM_ERC_SES_1-activated
2. Customizing table T77RCF_SPT maintained with required information
3. Run report RCF_PERIODICAL_SERVICES to update table T77RCF_INT_PUB.
Still we are getting error as mentioned above. Can anybody help on this?
Regards,
Purnima

Dear Purnima,
You should have a look at it in client 000. This is where you can find the table entries how they are shipped with SAP. Problem is that this is the search customizing and if we have other customizing entries in our system they don't suit to your system because I found one different entry in table V77RCF_SMG_NAVI. Please can you check out all tables and compare them with your client 000? (all tables in IMG candidate search > search profile and search templates).
Hope it helps,
Regards
Christine

General experiences from ehp3 to ehp4

Similar Messages

Maybe you are looking for