General Fault Handler - ESB implementing OWSM

good day
When I activated my OWSMAgent within ESB, I launched a null pointer Exception when running a fault, since I have reviewed the documentation WSM_DeploymentGuide and commented that it is not possible to add an error handler general, reviewing the logs I found the following error:
XML-22045: (Error) Extension function error: Class not found '
Missing class: com.cablemas.extensionfunctioncablemas.ExtensionFunctionCablemas
Dependent class: oracle.xml.xpath.XSLExtFunctions
Loader: oracle.xml: 10.1.0_2
Code-Source: / F: / product/10.1.3.1/OracleAS_1/lib/xmlparserv2.jar
Configuration: <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in F: \ product \ 10.1.3.1 \ OracleAS_1 \ j2ee \ home \ oc4j.jar
This load was initiated at oc4j: 10.1.3 using the loadClass () method.
The missing class is available from the following locations:
1. Code-Source: / F: / product/10.1.3.1/OracleAS_1/j2ee/oc4j_soa/applib/ExtensionFunctionCablemas.jar (from <code-source> in / F: / product/10.1.3.1/OracleAS_1/j2ee/oc4j_soa/config / server.xml)
This source code is available in loader global.libraries: 1.0. This shared-library can be made visible to the "oc4j" by modifying the boot loader descriptor.
Class ExtensionFunctionCablemas use it to take the code of the error, locate it within a table in the DB and return the corresponding message, the null pointer exception only if it throws error. OWSM reviewing the request is recorded correctly, and the answer recorded as a fault but I'm not returning the message corresponding to error code.

Dear Pallavi,
Very useful post!
I am looking for similar accelerators for
Software Inventory Accelerator
Hardware Inventory Accelerator
Interfaces Inventory
Customization Assessment Accelerator
Sizing Tool
Which helps us to come up with the relevant Bill of Matetials for every area mentioned above, and the ones which I dont know...
Request help on such accelerators... Any clues?
Any reply, help is highly appreciated.
Regards
Manish Madhav

Similar Messages

Implement custom fault handling in bpel

Hi,
Can you please provide some link on how to implement custom fault handling in bpel
Thanks,
kpr

See the article below for details on implementing custom fault handling.
http://beatechnologies.wordpress.com/2011/07/18/fault-handling-in-oracle-soa-suite-advanced-concepts/

How Handle ESB business Faults using Error Hospital

Hai Everyone
I am trying to configure Error Hospital for both BPEL & ESB faults. I`ve successfully configured it for BPEL and am trying to do that for ESB. I found that Fault Management can`t be done for ESB. Is that true ?
If thats true, then I was thinking of a solution:
1) Throw Fault from ESB to BPEL Service Invoker
2) BPEL Invoke activity fails
3) BPEL fault policy will be used.
Now I am struck in throwing fault using XSL transformation from ESB service wsdl to BPEL, but my BPEL invoke activity doesnt understand the fault from wsdl and just thinks that as the output and succeeds.
Is there anyway to get around this ?
cheers
Srini

Nagakiran-
As long as the fault is thrown by external service, you could handle the same ways as system fault.
Below URL could show some example:
http://www.it-eye.nl/weblog/2009/02/14/oracle-bpel-fault-policy-framework-handling-custom-business-faults/
-Sridhar

How to implement Fault Handler in BPEL

Any good material or sample available on ? How to handle exception properly If error does occur in BPEL ?

Hi',
Check this out,
http://rathinasaba.wordpress.com/2011/05/29/fault-handling-in-bpel/
http://rahullahiri.blogspot.com/2011/02/basic-fault-handling-in-soa-11g.html
http://jianmingli.com/wp/?p=2708
-Yatan

Fault handling for Mediator component

I am trying to capture all the system and business faults of the composite and email the details to system groups. I am having issues with the fault policy file and get the following error. My Composite is made up of Web Services ---> Mediator ---->DBAdapter
INFO: FaultPoliciesParser.parsePolicies ------->Begin Parsing of policy file
<Jun 18, 2012 3:48:58 PM EST> <Error> <oracle.soa.mediator.common.error.recovery> <BEA-000000> <Failed to recover the mediator fault.
oracle.fabric.common.FabricException: Missing fault policy: TESTFaultPolicy
at oracle.integration.platform.faultpolicy.RecoverFault.resolveToActionRef(RecoverFault.java:101)
at oracle.integration.platform.faultpolicy.FaultRecoveryManagerImpl.resolveToActionRef(FaultRecoveryManagerImpl.java:151)
at oracle.tip.mediator.common.error.recovery.MediatorRecoveryHandler.resolveToActionRef(MediatorRecoveryHandler.java:158)
at oracle.tip.mediator.common.error.ErrorMessageEnqueuer.enqueue(ErrorMessageEnqueuer.java:174)
at oracle.tip.mediator.dispatch.db.DeferredDBWorker.handleError(DeferredDBWorker.java:117)
at oracle.tip.mediator.common.listener.DBWorker.process(DBWorker.java:114)
at oracle.tip.mediator.common.listener.AbstractWorker.run(AbstractWorker.java:83)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
I am attaching the following files
FAULT-POLICIES.XML*
<?xml version="1.0" encoding="UTF-8"?>
<faultPolicies xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<faultPolicy version="2.0.1" id="TESTFaultPolicy">
<Conditions>
<faultName>
<condition>
<action ref="ora-java"/>
</condition>
</faultName>
</Conditions>
<Actions>
<Action id="ora-java">
<javaAction className="test.EmailFaultHandler"
defaultAction="ora-human-intervention">
</javaAction>
</Action>
</Actions>
</faultPolicy>
</faultPolicies>
FAULT-BINDINGS.XML_
<?xml version="1.0" encoding="UTF-8"?>
<faultPolicyBindings version="2.0.1"
xmlns="http://schemas.oracle.com/bpel/faultpolicy">
<composite faultPolicy="TESTFaultPolicy"/>
<component faultPolicy=" TESTFaultPolicy">
<name>HandleRealTimeRequests</name>
</component>
</faultPolicyBindings>
I am yet to figure out how to capture the fault and email to the groups in EmailFaultHandler.java file below
EmailFaultHandler.java_
package test;
import com.collaxa.cube.engine.fp.BPELFaultRecoveryContextImpl;
import java.util.Map;
import oracle.integration.platform.faultpolicy.IFaultRecoveryContext;
import oracle.integration.platform.faultpolicy.IFaultRecoveryJavaClass;
public class EmailFaultHandler implements IFaultRecoveryJavaClass {
public void handleRetrySuccess(IFaultRecoveryContext iFaultRecoveryContext) {
public String handleFault(IFaultRecoveryContext iFaultRecoveryContext) {
//Print Fault Meta Data to Console
System.out.println("****************Fault Metadata********************************");
System.out.println("Fault policy id: " + iFaultRecoveryContext.getPolicyId());
System.out.println("Fault type: " + iFaultRecoveryContext.getType());
System.out.println("Partnerlink: " + iFaultRecoveryContext.getReferenceName());
System.out.println("Port type: " + iFaultRecoveryContext.getPortType());
System.out.println("**************************************************************");
//print all properties defined in the fault-policy file
System.out.println("Properties Set for the Fault");
Map props = iFaultRecoveryContext.getProperties();
for (Object key: props.keySet())
System.out.println("Key : " + key.toString() + " Value : " + props.get(key).toString());
//Custom Code to Log Fault to File/DB/JMS or send Emails etc.
return "Manual";
Please suggest
Thanks
Edited by: user5108636 on 18/06/2012 00:20
Edited by: user5108636 on 18/06/2012 00:20

By the way, I managed to break through a little further. Now I am past this fault policy error. However, the java fault handler class is giving ClassNotFoundException. The way I added the java file (test.EmailFaultHandler) through JDeveloper in the composite project (Right click --> New ---> Java file). How do I add this to the classpath. I thought it automatically gets added to the SOA composite project classpath.
Please suggest.
INFO: FaultPoliciesParser.parsePolicies ------->Begin Parsing of policy file
<Jun 19, 2012 10:58:01 AM EST> <Warning> <oracle.soa.mediator.monitor> <BEA-000000> <Venkat:Inside Synchronized block with msg id :CCA40B60B9A911E1BF115F9190ABA14C>
<Jun 19, 2012 10:58:01 AM EST> <Warning> <oracle.soa.mediator.monitor> <BEA-000000> <Venkat:Inside Synchronized block with msg id :CCA40B60B9A911E1BF115F9190ABA14C>
<Jun 19, 2012 10:58:01 AM EST> <Warning> <oracle.soa.mediator.monitor> <BEA-000000> <Venkat:Inside Synchronized block with msg id :CCA40B60B9A911E1BF115F9190ABA14C>
<Jun 19, 2012 10:58:01 AM EST> <Error> <oracle.soa.mediator.common.listener> <BEA-000000> <Enququeing to Error hospital successful...>
<Jun 19, 2012 10:58:05 AM EST> <Error> <oracle.soa.mediator.common.error.recovery> <BEA-000000> <Error while loading "test.EmailFaultHandler" java class specified for action "ora-java".>
<Jun 19, 2012 10:58:05 AM EST> <Error> <oracle.soa.mediator.common.error.recovery> <BEA-000000> <Failed to recover the mediator fault.
java.lang.ClassNotFoundException: test.EmailFaultHandler
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:179)
at weblogic.utils.classloaders.ChangeAwareClassLoader.loadClass(ChangeAwareClassLoader.java:43)
at oracle.tip.mediator.common.error.recovery.CustomJavaHandler.execute(CustomJavaHandler.java:69)
at oracle.tip.mediator.common.error.recovery.MediatorRecoverFault.recover(MediatorRecoverFault.java:73)
at oracle.tip.mediator.serviceEngine.MediatorFacadeService.recoverFault(MediatorFacadeService.java:988)
at oracle.integration.platform.faultpolicy.RecoverFault.recoverAndChain(RecoverFault.java:161)
at oracle.integration.platform.faultpolicy.RecoverFault.resolveAndRecover(RecoverFault.java:124)
at oracle.integration.platform.faultpolicy.FaultRecoveryManagerImpl.resolveAndRecover(FaultRecoveryManagerImpl.java:123)
at oracle.tip.mediator.common.error.recovery.MediatorRecoveryHandler.recover(MediatorRecoveryHandler.java:116)
at oracle.tip.mediator.common.error.ErrorDBWorker.handleMessage(ErrorDBWorker.java:37)
Thanks

Fault Handling in Mediator

Hi,
We have a DBAdpater to retrieve the data and a mediator to invoke the DBAdapter. In cases like No Records we want to create a soap fault. So we implemented Mediator Java callout and overriden postRouting() to read the response message and create a soapfault.
[ we referred to blog http://technology.amis.nl/blog/6669/soa-suite-11g-introducing-mediator-java-callouts-for-debug-audit-and]
but when we tried creating SOAPFault and add it to the response message, while execution , the response message is being parsed and seeing the fault it is throwing the exception below:
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException:
This is a fault.
at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestMode
l.java:575)
at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381)
at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMetho
dBinding.invoke(MethodExpressionMethodBinding.java:53)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMet
hodBinding(UIXComponentBase.java:1259)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand
.java:183)
I found that if exception from mediator is not handled, then the exception is throw as system fault as shown above.
So we tried implementing external fault handling - by creating fault-policies.xml and fault-bindings.xml and a java callout.
fault-bindings.xml
<?xml version=”1.0" encoding=”UTF-8"?>
<faultPolicyBindings version=”2.0.1" xmlns=”http://schemas.oracle.com/bpel/faultpolicy”>
<composite faultPolicy=”SOM_ServiceFaults”/>
</faultPolicyBindings>
fault-policies.xml
<?xml version="1.0" encoding="UTF-8"?>
<faultPolicies>
<faultPolicy version="2.0.1" id="SOM_ServiceFaults">
<Conditions>
<faultName xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" name="env:Fault"> 
<condition>
     <action ref="ora-custom"/>
</condition>
</faultName>
<faultName xmlns:medns="http://schemas.oracle.com/mediator/faults" name="medns:mediatorFault">
<condition>
<action ref="ora-custom"/>
</condition>
</faultName>
</Conditions>
<Actions>
<Action id=”ora-terminate”>
          <abort/>
     </Action>
<Action id="ora-custom">
<javaAction className="gm.som.FaultPolicyJavaAction" defaultAction="ora-terminate">
<returnValue value="ora-terminate" ref="ora-terminate"/>
</javaAction>
</Action>
</Actions>
</faultPolicy>
</faultPolicies>
But still getting the error.Appreciate any help on this.
Thanks in Advance,
Subhashini

Not exactly but doing it the other way around by copying the fault msg to output variable and check flag for the response in my initial requester process then throw fault accordingly.. didnt have much time as it was holding back my other deliverables
Thanks a lot for your time

11g: Help regarding fault handling framework

I am trying to implement a POC demonstrating the fault handling framework using fault policies. I am trying to handle remote and business faults. These faults are being thrown explicitly in the code. But I dont see the framework coming into picture. Here are the fault policies and fault bindings files
The POC does the following
1. If input is R, throws a remote fault.
2. If input is B1, throws a business fault. There is a catch defined for this. But as we also have a policy for this error, we expect the policy overrides the catch
3. If input is B2, throws a business fault. There is no catch defined for this. We expect the policy to handle this.
4. If any other input, we return a string.
<?xml version="1.0" encoding="UTF-8"?>
<faultPolicies xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<faultPolicy version="2.0.1" id="ComponentFaults"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Conditions>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:remoteFault">
<condition>
<action ref="ora-human-intervention"/>
</condition>
</faultName>
<faultName xmlns:ns1="NS_B1"
name="ns1:LP_B1">
<condition>
<action ref="ora-human-intervention"/>
</condition>
</faultName>
<faultName xmlns:ns2="NS_B2"
name="ns2:LP_B2">
<condition>
<action ref="ora-human-intervention"/>
</condition>
</faultName>
</Conditions>
<Actions>
<Action id="ora-human-intervention">
<humanIntervention/>
</Action>
</Actions>
</faultPolicy>
</faultPolicies>
Here is the fault-bindings.xml file
<?xml version="1.0" encoding="UTF-8"?>
<faultPolicyBindings version="2.0.1"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">

<component faultPolicy="ComponentFaults">
<name>BPEL</name>
</component>
</faultPolicyBindings>

I created another bpel in the same composite that calls the original bpel. So now, those errros are supposed to travel to calling bpel.
Fault policies are coming into effect now. So, one part of the problem is solved, that atleast syntax and all is correct, and the fwk does work (!) but another one has opened - why is the fault not getting handled by the fwk if there is a single bpel that is throwing and not catching those faults.
Also, even in this new avatar, fault b1 is getting handled by the catch in BPEL process, while the fault policies are supposed to override any catches in bpel code.
What I was attempting was, throwing the fault in a bpel process and expecting the fault handling fwk to handle it.
It turns out, the framework is not capable of doing this, its only capable of handling faults coming after an invoke activity.
Consulted Oracle Support on this. Their response
The behavior within the single composite you are seeing is correct and is by design. As the documentation states:
http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10224/bp_faults.htm#BABIGGIB
If a fault occurs during runtime in an invoke activity in a process, the framework catches the fault and performs a user-specified action defined in a fault policy file associated with the activity.
The fault management framework catches all faults (business and runtime) for an invoke activity.
So the above means that unless the fault is thrown in response to an invoke activity the Fault Policy set will not be triggered, which has been confirmed through the test you have uploaded. Please let me know if you have any questions or concerns.

Creating Fault Handling and Exception in Oracle BPEL

I am following BPELtutorial-Orderbooking.pdf and have successfully reached chapter 6 i.e. Creating Fault Handling and Exception in Oracle BPEL. Everything went fine except this one... i.e. after implementing the Fault Handling and Exception in Oracle BPEL when I execute my process and enter CustId that begins with 0.... the invokeCR generates error message as follows as expected:
<NegativeCredit xmlns="http://services.otn.com">
<part name="payload">
<error xmlns="http://services.otn.com">Bankruptcy Report</error>
</part>
</NegativeCredit>
However, the execution proceeds ahead instead of terminating. The tutorial states that the BPEL process should terminate as the SSN is invalid, can anyone please tell me whats going wrong.. ?

Well not exactly.... but when click on the 'Audit' sheet under BPEL Console for this instance, I can see the following:
invokeCR (faulted)
[2006/03/20 10:35:07] "{http://services.otn.com}NegativeCredit" has been thrown. less
<NegativeCredit xmlns="http://services.otn.com">
<part name="payload">
<error xmlns="http://services.otn.com">Bankruptcy Report</error>
</part>
</NegativeCredit>
The above is exactly what the tutorial states will be the output, so I presumed that the exception must have fired !

Fault handling using BPEL

Good, I'm working on a research project and I have been assigned the task of processing errors in SOAP BPEL.
I've been searching on Internet and the most commonly methodology used is soap-fault with throwing and catching exceptions in BPEL process.
I wonder if I can do it in a more proactive and comprehensive way, catching those exceptions through a web service, and if possible, how can the BPEL process send the information encapsulated in the soap-fault to the web service?
If there is another way of treating errors or someone can suggest me another way, I would be very grateful.

I am not clear on your objective, but in so far as BPEL SE Component of Open-ESB Project, running on JBI is concerned you can read more about Fault handling and other features of BPELSE here at http://wiki.open-esb.java.net/Wiki.jsp?page=BPELSE. Also, you can find some working examples on this page http://wiki.open-esb.java.net/Wiki.jsp?page=HowToDo
- Malkit

Default fault handler

Hello,
I have a prospect that would like to have a generic default exception handler that will include a generic human task.
The human task will receive the error details and allow the user to instruct the BPM engine to retry that faulty activity and resume the process from the point where it was stopped, or terminate the current process instance.
Is there a supported way of doing so ?
Thanks,
Meni,

Thank you for idea, that would solve this problem. But generally speaking, does Oracle BPEL Server support concept of default compensation handlers and default fault handlers by WS-BPEL1.1 specification or not? By my experience, it doesn't. Unluckily, you cannot use universal compensation activity (without name of the scope) either, and so you have to use in every fault handler list of compensation activities, each of them with name of specific scope. Am I wrong?

How to register multiple stages in fault handler?

Hi,
I am trying to create multiple fault handlers for multiple CQL processors.
I understand how to create one handler but when I am trying to add another osgi service to rgister anothet fault handler I get strange behaviot in theeclipse. The EPN disappears.Any advice?
Another question - how do I register multiple stages to the same handler?

Hi,
I am trying to create multiple fault handlers for multiple CQL processors.
I understand how to create one handler but when I am trying to add another osgi service to rgister anothet fault handler I get strange behaviot in theeclipse. The EPN disappears.Any advice?
Another question - how do I register multiple stages to the same handler?

What are the different approaches to do Fault Handling?

What are the different approaches to do Fault Handling?

for uplodig data to non sap we have 2 methodes
i) if u know bapi u will use lasm
2) bdc
but u mentioned so many records isthere
best thing is u will uplode all record sto al11 using XI interface
then u have to write bdc / lsmw program
beter to go for lsmw before that u will find bapi
if u will unable to find bapi
u have to create bapi and use it in lasmw
ofter that u have schedule the lsmw program as a bockground
then u have to create a job for it
and release from sm 37
then u have to moniter through bd87
if u want to go through i will help u.
if it is usefull to u pls give points
Saimedha

Clarification needed in the Fault Handling Framework(Error Hospital)

Hi,
I need some clarification on Fault Handling Framework...
Scenario:
My BPEL Process is Asynchronous.(10.1.3.3.1) and I tryed to invoke the another BPEL Process( which is used to select the Fname from the table using DB Adapter) . In the Main BPEL Process I have the Fault handling Framework and I done necessary changes in the bpel.xml. This is successfully working for Invoke Activity when ever an Remote or Binding Fault occurs in the Sub-BPEL Process and this Fault is send to Fault-Policy.xml in the server(bpel/domains/default/config/fault-Policy) and works accordingly to the action mentioned in the policy xml....( I have also made changes in the fault-bindings.xml ).
How ever this Framework is working fine for every actions.
Need Clarification:
1) Only the Binding and Remote faults will work for the Fault handling Framework.
2) can we use User defined faults (Buissness Faults,,,) for this........because I used the User defined faults to invoke the fault-policy.xml and it won't works....
3)Only Invoke Activity can be handled for this Framework or any Other Activity........
4)How to handle other Activity in the Fault-policy.xml...
5)Any difference for Asynchronous or Synchronous in this Fault Handling Framework.......
I also referred the Oracle SOA Suite New Feauters PDF .......
Can any one send me the related documents and try to help me on this.
Please help me on this.......
Thanks,
Ashok.

Hi Chintan,
You are saying that Custom faults are also supported for fault-Policy.xml.
I can't understand that 2nd answer you said. can you please explain how to use the Custom faults in the FaultHandlingFramework..
My Scenario:
I have 2 BPEL Process, BPEL1 will invoke the BPEL2 and if any remote fault or binding faults occurs in the BPEL 2 its returning the same fault to BPEL1 and here I am using FaulthandlingFramework , this fault send to fault-policy.xml and necessary action is took place succesfuly...(like retry, human intervention.....)
But when I throw some CustomFaults(userdefinedFaults)in the BPEL2 , its returning as a remotefault to BPEL1. I don't know how to use the customFaults in the Fault handling framework.......
Can you explain me in detail how to use custom faults in faulthandling framework...............
Send me some related documents for this.....

Fault Handling in BPEL process

hi
We have to develop an application which involves several BPEL processes and proxy service(OSB) and JMS queue etc.
What is the difference between Fault Management Framework in SOA11g and normal fault handling(using catch and throw activities)?
which one we should prefer for fault handling in our application n why?
Plz help thanks in advance.

Hi-
In Normal Fault handling process, you will be able to catch the faluts only but in Fault Management Framework if a fault occurs the framework catches the fault and performs a user-specified action defined in a fault policy file associated with the activity. You can also have a human intervention prescribed in it, where you perform recovery actions from Enterprise Manager.
Pls go throgh the below post for detailed description
http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10224/bp_faults.htm
Fault Management Framework and non BPEL soap faults
Edited by: 333333 on Mar 23, 2011 5:01 PM

Fault Handling Issue in OSB

Hi,
This is regarding SOAP fault handling in OSB11g.
i am expecting that whenever OSB proxy service recieves a fault response the flow should move to service error handler if any. But its not happening.
We tested our service with SOA Test stubs and SOAP UI mock services. When SOA test stub send fault response OSB considering it as normal response. But when the same fault is sent by SOAP UI mock service OSB is considering it as fault and going to service error handler.
Now the same is happening when we replaced the service provider with one of the .NET service. The fault response is in SOAP 1.1 structure.
Please let me whats the difference or any setting or HTTP response code we need to look at.
Thanks & Regards
Siva

Hi Anuj,
I am using the same fault structure which is working in Soap UI mock service. Still its not working in Soa test stub. And now facing the same issue when fault comes from .NET based service provider.
Will verify once to see whats the response code thats being sent.
Thanks
Siva

General Fault Handler - ESB implementing OWSM

Similar Messages

Maybe you are looking for