General hosting question for India

We are developing a web site using JSC and it is intended for India market.
I guess it is not particular JSC technical question but in general and may be people can share their experience or give some thoughts about it.
It will be deployed using Tomcat and MySQL.
As reading forums we found some hosting site like dailyrazaor in US.
So just wondering if it is hosted in US, will it be slow as compare to if hosted in India?
Do people see any other issue with this?
Does anybody know any good web hosting in India using Tomcat and MySQL or some other good site in US.
Thanks for your time.

Not sure of any India based hosting site.
But just from observation, when I download some file, normally site provides some mirror sites and recommend to download from the mirror which is closer to you. So I guess where the site is hosted will contribute some effect as request will route through number of servers.

Similar Messages

General xSan questions for a new setup

So I'm looking to setup xSan. Had mainly one question. I know it's recommended that you have a secondary metadata controller server incase one goes down, but is this absolutely needed? We will have very few (like 3) people using the system so it won't be in use very often. If the controller goes down, does the system go down entirely, or can clients still access data with the potential of messing things up because the metadata server isn't functioning?
Thanks.

If you have one controller and the controller goes down, the SAN goes down and you run a higher risk of volume damage. The reason for a dedicated backup controller is so that when the primary goes south, there is another system to take of the SAN control, allowing you to complete writes and shut the volume down cleanly.
If the system is not going to be used that often, are you sure Xsan is the right solution for you? Even if you try and scrimp to save money and make a workstation a backup controller, you are still going to spend about $40K for the solution ($20K for a single RAID array, $7k for a dedicated controller, $4k for the FC switch (you should get two), wiring costs, redundant power, cooling, etc). That is a lot to spend for something that is not going to get much use.
Oh, and don't go easy on RAM. For your controllers get 2 Gigs per SAN volume and at try to leave 4 Gigs as overhead for the OS and other services. Don't run anything else on the main controller other than DNS and Dir Services (unless you are doing AD integration).
Hope this helps

General Product Question For Beginner

Hello,
I was thinking of purchasing Adobe Connect Enterprise Server
6 and had a question regarding licensing, but didn’t want to
receive the hard sell from an Adobe representative.
I wish to deploy Adobe connect on a single server behind a
firewall and with an estimated on/off access of around 200 users.
Does anybody use it for a similar scenario? If so what additional
features have you decided to use and how easy has it been to
integrate?
Most importantly for me, on a cost basis, how does the
licensing work for the product itself and the additional add-ons,
is it a per user cost or per instillation?
All very basic questions, but I thought I would dip my toes
in the water slowly  Any comments would be most helpful.
Thanks

77777777777777777777777777777777777777

Interview Questions for FI- General Ledger and Special Purpose Ledger

Hi Experts,
Can you guys provide me interview questions for
1) FI-SPL (Special Purpose Ledger)
2) FI-GL (General Ledger)
3) COPA
4) Cost Center Accounting
Help in this regard is highly appreciated. If you have any Interview Questions documents, please email it to [email protected]
Thanks
Rajanikanth.

I have some cost center qns
How is cost center realted to profit center?
What is a cost element group?
What is a cost center group?
What is the difference between Assesment & Distribution?
What is a activity type?
Award points if helpful

Hoping for a little help with registering and hosting questions.

i was hoping i could get some information from some of you
that have personal experience with registering your site and
picking a hosting provider.
im wondering what the difference is between say....Dot5
hosting at 5.00 a month and .. network solutions at 29.99 a month?
my local provider here in sacramento wants 30 a month as
well......299.oo a yr.
should I go with a local provider? or go with ... say GoDaddy
or some other company?
also, registering. Im about to register my site name.
however, some companies include it in the "packages" they offer.
should I register it myself or let the hosting company I choose do
it?
sorry for the newb questions....but I cant find any good info
on this and I was hoping maybe some of you that have already done
this to chime in.
thanks in advance.

If you want almost all of the below features for about $9.00
a month go to
Gate.com and pick your package. I use them for several web
sites and have
never been dissatisfied with their services or features.
They will register your domain and I've done it both ways,
but have never
had problems with them but it does make a lot of sense to
register it
yourself and keep full ownership....
"Sonjay" <[email protected]> wrote in message
news:C19368C5.A15FD%[email protected]...
> There's probably not a dime's worth of difference
between the Dot5 hosting
> and the NetSol hosting, but I wouldn't recommend either
of those companies
> for hosting.
>
> $30/month seems high unless you have very specific needs
-- there's plenty
> of good hosting around for $8 or $10 a month. The thing
you need to do is
> decide what your requirements are: php? asp? MySQL?
Access? dot.net?
> E-mail?
> Telnet or SSH access? Do you need/want a control panel
that makes it easy
> for you set up your own e-mail accounts, password
protect directories, and
> that sort of thing, or will basic FTP access be all you
need? Do you want
> a
> statistics package included with your hosting? Do you
need to run more
> than
> one domain under the same account? If all of the above
makes you shake
> your
> head and say "I don't need any of that," then you can
probably manage just
> fine with any of the $5-$10 month basic packages, with a
reputable host.
>
> Whatever you do, register your domain separately from
your hosting, and
> only
> use an ICANN-accredited registrar, none of those
resellers that tend to
> disappear and/or register people's domains in their own
name. I have
> nothing
> good to say about NetSol as a registrar, going back to
the years when they
> were the only game in town, and I will never use them
again, but any other
> ICANN-accredited registrar should do you just fine.
>
> --
> Sonjay
>
> On 11/29/06 3:51 PM, "Progressive_Learning" wrote:
>
>>
>>
>> i was hoping i could get some information from some
of you that have
>> personal
>> experience with registering your site and picking a
hosting provider.
>>
>> im wondering what the difference is between
say....Dot5 hosting at 5.00 a
>> month and .. network solutions at 29.99 a month?
>>
>> my local provider here in sacramento wants 30 a
month as well......299.oo
>> a
>> yr.
>>
>> should I go with a local provider? or go with ...
say GoDaddy or some
>> other
>> company?
>>
>> also, registering. Im about to register my site
name. however, some
>> companies include it in the "packages" they offer.
should I register it
>> myself
>> or let the hosting company I choose do it?
>>
>> sorry for the newb questions....but I cant find any
good info on this and
>> I
>> was hoping maybe some of you that have already done
this to chime in.
>>
>> thanks in advance.
>>
>
>

Questions on setting up PeopleSoft FIN AP Business Unit for India with TDS

Hi,
Does anyone here have some advice for me on how to handle AP transactions for a business unit set up for India with TDS (withholding) and statutory reporting.
We are configuring AP BU for India in our existing database which has other BUs for other countries not using withholding. For India the way we understood on statutory is that all invoices must be recognised for withholding at the time of invoice entry or payment which ever ealiest. For PeopleSoft we always have to create voucher before we can make mayment so the earliest occurace will be at voucher entry that withholding should be deducted (at voucher post).
The problem that we are encountering is that if we have prepayment invoice, we can use prepaid voucher to record this. However, when we receive the final invouce and entered into PeopleSoft the voucher post reversed the original withholding lines and recreate in the final invoice with final invoice amount. This could be in different period. As for the India rule the way we understood this is that the entries that created at prepaid should not be reversed, also those withholding might already be paid to the goverment in prior period before receiving the final invoice. The final invoice should have withholding calculate just for the difference of the invoice balance.
Our other problem is on the statutory reporting that all transactions should be recorded in that particular period. Our current setup has AP close period at the end of each month which means we cannot enter invoices raised in previous period or have adjustments put in the period that already closed.
Any help and advice on how companies that has India AP business unit deal with the above mentioned issues are much appreciated.
Thank you.

Thanks Marc Sachdeva.
I don't mean where to set up withholding. I have alredy configured all withholding details and everything works fine in AP.
However, as India statutory comes in, I'd like to know how other companies handle cases like accounting entries for transactions in specific period if your system has AP/GL closed periods. Normal cases would be put entries in the next accounting period. But as my understanding on the Indian rules is that withholding must be recorded at the time of entering the invoice. So how should adjustment be made.
Another thing is the prepayment invoices, using PeopleSoft Prepaid voucher would cause the accounting entries for withholding lines to be reversed and then re-recorded when posting the final invoice (that matches with the prepaid). I would like to know how companies are dealing with such case as the TDS lines could be revsersed and recalculate in different accounting period. Also if the period that it revsered the TDS % could have changed and when the reverse happens it will recalculate withholding based on the new rate for the whole of invoice amt.
For example an invoice of 10000 INR, 50% is to be recorded and paid in advance so raise the invoice of 5000 INR in Feb. TDS is 10%.
- So vendor will be paid 4500 and 500 is for withholding.
- In April then receive final invoice of 10000 INR, record into PS as 10000 but matched to prepaid so the remaining invoice is 5000. withholding rate in Apr is now 15% so 15% should be applied to the remaining invoice of 5000 INR. As the prepaid voucher option reversed withholding lines and recalculate with final invoice total so the withholding to be deducted is calculated at 15% = 1500 (10000 * 15%).
- As the prepaid invoice withholding might have already been paid in March before the rate changed, the final invoice should have withholding of 750.
I'm not sure if my understanding of recording withholding for India is correct and whether it really needs to be recorded in the month that invoice is raised. As the way I understood and have been told it has to be recorded in that month. I.e. invoice received on 30 April must be entered into accounting period of April. Our business close AP/GL about a week before the end of month so if we receive invoice on 30th April but our AP/GL already closed on 25th Apr then 30th Apr invoice should go to May accounting period. As statutury requirement is to record this into April. How does anyone handle this?
Thanks.

Question for Forum Hosts

Sorry, this is a question for you about how this forum works or what options I am supposed to use, versus being a new problem... I couldn't find a "Contact Us" link to get this question to you any other way.
I posted a message (marked as a question), "Wireless-G Card causes Tecra 730CDT to Hang," on February 14th. I got a reply from "Quad" and I then replied to that reply (and marked it "still not answered"). The now 3-part message was on the main forum list for about 1/2 day and then it disappeared from it completely. I can do a search and find the original message and the 2 replies, but they are not on the main list.
I can't figure out why it is not on the main forum list. Did I do or say something wrong so it was dropped from the list? Did I fail to do some step or check some box that is required before it can return to the list?
I really would like the original message and replies back on the main forum list, as I still have the same problem and am hoping someone will see it and provide a solution to my problem. Please advise.
Thanks,
[email protected]

Hi Ivan,
First, thank you very much for clearing up what I thought was a mystery of my disappearing posting. Basically, I thought my problem belonged in the TE and Tecra Series forum (what I thought of as the "main page") and was dismayed when I couldn't find it in there. Yes, the Wireless Board is definitely the more appropriate spot.
Secondly, thank you too for your opinion on my attempt at jamming Wireless-G onto my old laptop. I am seeing that you and Quad must be correct... the fact that the 730CDT works so well with my 10/100 wired card made me feel it could handle everything.
I have to admit I have never tried slower Wireless-B. Technology has moved so fast and prices have dropped so much that it was cheaper to buy a brand new boxed kit (router and card) for Wireless-G than it was to buy an old Wireless-B set up... I got caught up in getting the best deal instead of making the best technology match.
I will close this question on "where's my posting?" but will leave the original "730CDT Hang" posting alive for awhile longer.
Many thanks again,
Wayne

Jonatan R. Aug 1, 2012 5:42 PM Hello, didnt really know hwere to post this guess it more belong under like "computers" generally, but! For a while... (-THE LONGER VERSION) : No whait!, let me start where it all began, 2009, a december (erhh.. ii

Hello, didnt really know hwere to post this guess it more belong under like "computers" generally,
but! For a while...
(-THE LONGER VERSION) :
No whait!, let me start where it all began, 2009, a december (erhh.. iii think? Hwatever!) litlle me hwere nearly Totally blank to the computer world. And suddenly it stood there on the table, a shining (it was shining back there) new "hp pavillion entertainment pc" with its smell of fresh plastic mixed hwith the strong smell from the cardboardbox, remember it as if it were yesterday
... Since then.... I have today a good solid pc knowing! (at more advance level cmd,bott menu, recovery, blah, blah... NERD!) here at the last awhile, ive prommised to make a lot! A lot of video projects!
(okay 2, but some big ones!) avchd multilayer 2 hours!!!!
So the poor hp laptop -dual core i2 4gb ram, has been begged to it knees! And simply cant handle it of course! and it have just trough time benn loaded with lots of crap, and is extremly noisy, heat, slow, anoying = unusable!
SO hwat i need is...
(-THE SHORTER) :
A computer setup that will EASILY! could handle stuff like that (avchd, multilayer, 2 hours project) -and simmilar. A total power machine! But Im tired of windows! And ugly cheap looking design! The times have changed and i change with them!
NOW I WANT APPLE!!
But but but... Hwat should i get????
1. Im NOT a billionare!
2. I repeat: NOT a billionare!
3. I also need portability for every day use beyond the hardcore creative editing and use
AT LAST:
i saw in front of me this genius plan... With a macbook pro, a tuned one, with as much of ram,cpu,gpu, and everything else as it can posibble have
-the perfect combination of transportabillity, everydayuse and total power!
When it gets combine with,
A cinemadisplay
A extra keyboard
And a extra magic mouse
And this power macbook pro, with screen, mouse, and keyboard i've found a really good offer at.
MY ACTUAL QUESTION.... :
Now it is yours turn to please! be creative! Please! Hwat does all you genius heads! think and say?
WILL A super tuned MACBBOK PRO COMBINED WITH ACCESSORIES, AT ALL, BE ABLE TO REPLACE A STRONG MAC PRO, OR AT LEAST BE MORE THAN ENOUGH FOR REALLY HEAVY STUFF? And if yes, HOW strong actually (ram,cpu,gpu...) will it need to have to be "more than enough"?
If no, what would all of you then suggest that is perfect in relation to everything?
PLEASE ANSWER!!

Jonatan R. wrote:
WILL A super tuned MACBBOK PRO COMBINED WITH ACCESSORIES, AT ALL, BE ABLE TO REPLACE A STRONG MAC PRO,
No,
the MacPro is the muscle machine and not constrained by power or cooling limitations like the MacBoo Pro is.
OR AT LEAST BE MORE THAN ENOUGH FOR REALLY HEAVY STUFF?
If you press the MacBook Pro like a desktop machine, it will blow fans like a hurricane but will do the job eventually.
The longer you blow fans on a laptop, the sooner it clogs up with crippling dust and shortens the life of the machine.
You'll need the top end 15" or better, not the 13" as it has no dedicated graphics, only CPU graphics.
Preferably if you just now getting into video, you should be considering Avid on a Windows 7 tower, it's because Apple has been ignoring the MacPro for hardware updates to improve it and it seems like they don't want to carry it anymore. Also the last Final Cut Pro version had Hollywood up in arms as Apple removed a lot of required abilities to make it more "consumer friendly" which upset the Pro market who likes control.
Apple is focusing on the consumer computing market and getting away from the "Pro" market which needs the heavier hardware to handle video needs. They stopped selling the X-RAID and the X-Server, so Apple really isn't a "computer" company any longer.
Sure you can use a MacBook Pro and a external monitor for doing home movies and such occasionally, but if your into serious production you need to consdier other options now.
There is nothing wrong in getting a MacBook Air and a Windows 7 professional video tower too.

I can't reterive sequerity question for my apple id

i can't reterive sequerity questions for my apple id
<Email Edited by Host>

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97539)

HT5621 I am being prompted for the questions for my apple ID. I have put what I think are the answers and it is still not letting me purchase games from my account. I try to send the answers to my e-mail and I am not getting them.

I am being prompted for the questions for my apple ID. I have put what I think are the answers and it is still not letting me purchase games from my account. I try to send the answers to my e-mail and I am not getting them. I had account issues about a year ago where my id was spelled wrong. Could this be associated with that?
<Email Edited by Host>

Hi gymdad1959,
This article has instructions for resetting security questions:
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
Cheers!
- Ari

Facts and Figures - A Question for the Forum Mods

A bit of a daft question for which I am sure the Forum Mods can provide an answer.
How many folks were registered on the old forum and how many on the new one?
I just want to put something BT Chairman Sir Michael Rake wrote to BT shareholders this month into context.
"To forbid us anything is to make us have a mind for it."
-- Michel de Montaigne, Essays, 1559

Naughty naughty General - they dont do "daft" on this forum, you should know that.
"You may well think that, I'm afraid I could'nt possibly comment"
Francis Urqhuart, who was never known by his initials to his friends.
AQ.
"Welcome to Royston Vasey - You'll never leave."

Generic Host process for WIN32 encountered an error and needed to close

Hi,
I hv installed SAP ECC6.0 SR3 on WIndows 2003 R2 Enterprise Edition. Many times i get an popup message on Windows Server "Generic Host process for WIN32 encountered an error and needed to close"
I hv checked the Event Viewer, in Event Viewer it shows the application error.
Consequences of this error is that my Transport path //hostname/sapmnt/trans becomes inaccesible, and I have to take the restart of Windows server to solve the problem. ONce Windows server is restarted for some time transports work, Again when receiving the same error popup on Windows, Transport path goes down.
Can anyone give input on this???

Hello,
You have posted a question that is related to system transports. Unfortunately this category is not related to these kind of questions. SAP TM deals with logistics in the real world - moving pallets, containers, loading trucks, etc.
To learn more about SAP TM please visit http://service.sap.com/scm-tm
Therefore I will now move this thread to the category Software Logistics. Thank you for your understanding.
Kind regards,
Nico van Os.

Oracle Financials for India - Local Chart of Account

Hi,
We have to implement Oracle Financials for India, I know that the calendar is from APR-MAR, but my question is: Is it needed to report the statutory books in a local Chart of Accounts or we can use our corporate ones based in US GAAP.
Thanks and regards,

Refer this query, you can get
select FIS.SEGMENT_NAME, FFV.FLEX_VALUE, FIF.ID_FLEX_STRUCTURE_CODE , FSA.*
from FND_SEGMENT_ATTRIBUTE_VALUES FSA, FND_ID_FLEX_SEGMENTS_VL FIS, FND_FLEX_VALUES_VL FFV, FND_ID_FLEX_STRUCTURES FIF
where FSA.attribute_value='Y'
and FSA.ID_FLEX_CODE = 'GL#'
and FSA.SEGMENT_ATTRIBUTE_TYPE = 'GL_ACCOUNT' --Natural Account Segment
and FIF.ID_FLEX_STRUCTURE_CODE='ACCOUNTING_FLEXFIELD'
and FSA.APPLICATION_COLUMN_NAME = FIS.APPLICATION_COLUMN_NAME
and FIS.FLEX_VALUE_SET_ID = FFV.FLEX_VALUE_SET_ID
and FIS.ID_FLEX_NUM=FIF.ID_FLEX_NUM
and FIS.ID_FLEX_CODE=FIF.ID_FLEX_CODE
AND FSA.ID_FLEX_CODE= FIF.ID_FLEX_CODE
and FSA.ID_FLEX_NUM=FIF.ID_FLEX_NUM
thanks

Quarterly Returns for India - SAP Note 1389028

Hi All,
This is regarding the Quarterly returns for India. We have applied the note 1389028. Under customisation, we need to update the tables J_1IMNSTRY_CD, J_1IDDCTR and V_SECCO_ADDL.
Could anyone explain the meaning of the following terms:
1) Ministry Code
2) Ministry Name
3) Deductor Type
4) Deductor Desc
5) Section Code
6) PAO Code
7) DDO Code
8) PAO Region
9) DDO Reg Number
Please help me....
Regards,
NEchur

Hi nachuriyer
For J_1IMNSTRY_CD
Min Code -Min Name
01            AGRICULTURE
02            ATOMIC ENERGY
03            FERTILIZERS
04            CHEMICALS AND PETROCHEMICALS
05            CIVIL AVIATION AND TOURISM
06            COAL
07            CONSUMER AFFAIRS, FOOD AND PUBLIC DISTRIBUTION
08            COMMERCE AND TEXTILES
09            ENVIRONMENT AND FORESTS AND MINISTRY OF EARTH SCIENCE
10            EXTERNAL AFFAIRS AND OVERSEAS INDIAN AFFAIRS
11            FINANCE
12            CENTRAL BOARD OF DIRECT TAXES
13            CENTRAL BOARD OF EXCISE AND CUSTOMS
14            CONTOLLER OF AID ACCOUNTS AND AUDIT
15            CENTRAL PENSION ACCOUNTING OFFICE
16            FOOD PROCESSING INDUSTRIES
17            HEALTH AND FAMILY WELFARE
18            HOME AFFAIRS AND DEVELOPMENT OF NORTH EASTERN REGION
19            HUMAN RESOURCE DEVELOPMENT
20            INDUSTRY
21            INFORMATION AND BROADCASTING
22            TELECOMMUNICATION AND INFORMATION TECHNOLOGY
23            LABOUR
24            LAW AND JUSTICE AND COMPANY AFFAIRS
25            PERSONNEL, PUBLIC GRIEVANCES AND PESIONS
26            PETROLEUM AND NATURAL GAS
27            PLANNNING, STATISTICS AND PROGRAMME IMPLEMENTATION
28            POWER
29            NEW AND RENEWABLE ENERGY
30            RURAL DEVELOPMENT AND PANCHAYATI RAJ
31            SCIENCE AND TECHNOLOGY
32            SPACE
33            STEEL
34            MINES
35            SOCIAL JUSTICE AND EMPOWERMENT
36            TRIBAL AFFAIRS
37            D/O COMMERCE (SUPPLY DIVISION)
38            SHIPPING AND ROAD TRANSPORT AND HIGHWAYS
39            URBAN DEVELOPMENT, URBAN EMPLOYMENT AND POVERTY ALLEVIATION
40            WATER RESOURCES
41            PRESIDENT'S SECRETARIAT
42            LOK SABHA SECRETARIAT
43            RAJYA SABHA SECRETARIAT
44            ELECTION COMMISSION
45            MINISTRY OF DEFENCE (CONTROLLER GENERAL OF DEFENCE ACCOUNTS)
46            MINISTRY OF RAILWAYS
47            DEPARTMENT OF POSTS
48            DEPARTMENT OF TELECOMMUNICATIONS
49            ANDAMAN AND NICOBAR ISLANDS ADMINISTRATION
50            CHANDIGARH ADMINISTRATION
51            DADRA AND NAGAR HAVELI
52            GOA, DAMAN AND DIU
53            LAKSHADWEEP
54            PONDICHERRY ADMINISTRATION
55            PAY AND ACCOUNTS OFFICERS (AUDIT)
56            MINISTRY OF NON-CONVENTIONAL ENERGY SOURCES
57            GOVERNMENT OF NCT OF DELHI
99            OTHERS
For J_1IDDCTR_CD
Deductor Type Deductor Desc
A             CENTRAL GOVERNMENT
B             BODY OF INDIVIDUALS
D             STATUTORY BODY (CENTRAL GOVT.)
E             STATUTORY BODY (STATE GOVT.)
F             FIRM
G             AUTONOMOUS BODY (CENTRAL GOVT.)
H             AUTONOMOUS BODY (STATE GOVT.)
J             ARTIFICIAL JURIDICAL PERSON
K             COMPANY
L             LOCAL AUTHORITY (CENTRAL GOVT.)
M             BRANCH / DIVISION OF COMPANY
N             LOCAL AUTHORITY (STATE GOVT.)
P             ASSOCIATION OF PERSON (AOP)
Q             INDIVIDUAL/HUF
S             STATE GOVERNMENT
T             ASSOCIATION OF PERSON (TRUST)
In V_SECCO_ADDL
just press Tab & link above information
CA. NILESH ZAMBHURIA
+919819336968

Basic questions for a self-taught re: HDV for SD HDV (yes again)

ok - like many others posting on this topic, I am apologising for going over what seems to be one of the most covered topics out there, that still isn't clear!
I am trying to teach myself DVD SP4 in the same way I did with FCP5 (trial, error and lots of forum searching). I am by no means a pro on FCP - but have certainly got enough understanding of it to have cobbled together 7 23 minutes episodes to broadcast! I have gone thought the DVD SP4 Manual and forums and lots of it just makes my brain ache - what mostly lets down my understanding are formats/compression/codecs.
So - my main questions (for now....)
-In DVD SP I couldn't import my QT movie into my assets list as it was an "incompatible format" - is this because it was HDV to a SD DVD Project? Doesn't the process of DVD SP encoding it as Mpeg 2 make is SD anyway?
-I read a post from someone in a similar situation, who advised exporting a HDV sequence as Uncompressed 8 Bit, and bringing that to DVD SP. So am doing that now (6 hours or so for a 23" sequence) and am hoping it gives a great looking picture, but I have seen from its preview icon that its a 720 x 576 frame - why is it not exporting in 16:9? or will it squeeze that down to normal once it's in DVD SP?
Really appreciate any understand you can help me with.
cheers
Hugh

Hughey wrote:
Going back to my original questions - could the problem be a HD file in an SD project?
No. If you followed the workflow process from the above post you would have a SD mv2 file. The file should be playable in Quicktime and it should be 16:9.
EDIT: Yes. Reading back on your OP this question ->
In DVD SP I couldn't import my QT movie into my assets list as it was an "incompatible format" - is >this because it was HDV to a SD DVD Project? Doesn't the process of DVD SP encoding it as Mpeg 2 >make is SD anyway?
I believe that importing a HDV file into a SD project would give you that error but if you follow the above steps and import the mv2, AC3 files you should not get that error.
The reason you got three files is because that is how the preset group is made up. To be completely truthful I duplicated that preset, deleted the AIFF part and renamed the group. I now use that as my default settings when I bring any asset into Compressor.
As far as bring video assets (quicktime SD/HD, or other) into DVDSP in general you can do this but, what is happing is that in the background DVDSP is going through the steps from my above post and creating the mv2, AIFF, AC3 files for you (based on your preference setting in DVDSP) and then replacing the video files you brought in with the compressed files.
Can you play the mv2 file in quicktime? If not then something else must be going wrong.

General hosting question for India

Similar Messages

Maybe you are looking for