General Info on integration between Project Systems (PS) and cProjects

Hi,
I would like some general info on the integration scenarios between PS and cProjects. Links to any documentation/blogs on this would also be very helpful.
Thanks,
Lashan

Hi Srini,
Thanks very much for the links. However, I've already gone through the standard documentation in SAP and they are a bit too high level/vague for me. I have considerable experience in xRPM, cProjects Suite and have good grasp of project management concepts, tool and techniques. My knowledge of PS is somewhat limited though.
What I am specifically looking for is what type integration options and scenarios are available. For example, cProjects can have phases and tasks defined. How would these integrate with for example WBS elements and networks in PS? What are the things you would do in cProjects and not PS and vice versa? Hope my question is clearer now.
Appreciate any further information you may have on the above.
Thanks,
Lashan

Similar Messages

Project System SAP and MS Project

Hi,
Someone know a software for integration between Project System SAP, and MS project, in addition to the "OpenPS".
Best Regards,
Helena Granja

Hi
Please check this
http://www.pipelinesoftware.com/psi/news.jsp?page=20080105
And from Impress
http://www.impress.com/stuff/contentmgr/files/7e364d6f079722b5d13bb004e69649c2/misc/impress_for_epm_web_1007.pdf
Regards

How to make a Integration between jdev10.1.2 and vss

How to make a Integration between jdev10.1.2 and vss to enable a version control.the help document tell to make a extension file, but how to do? thank you!

http://www.oracle.com/technology/products/jdev/101/htdocs/partners/addins/905resources.html
There is a link there to:
Creating a Version Control System Extension
A project with sample code to get you started

Architecture differences between Hyperion System 9 and Hyperion System 11

Hi,
Can any one let me know what is the difference in Architecture between Hyperion system 9 and Hyperion System 11?
I need it urgently. If any one has info around this kindly share with me or send some document in this respect to my mail id [email protected]
Kindly send the info.
Regards,
Ramachandran J

Hi Ramachandran,
1. Its impractical to list out the all architecture differences .
2. In short , the over all architecture of the whole suite is more or less similar to 9X(with lot of new features and tools too) , this is in comparision with 7X and system9( which was a complete paradigm shift ,as they got closely integrated in 9) , and in 11X its even more tightly integration and thats why named as fusion.
3. More info about features ...etc , you got to refer docs, no other alternative.
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

What's the difference between wcc system components and standard components

hi Experts,
My customer has a question on the difference between wcc system components and standard components, I didn't find it from doc, anyone can help on answering this?
Best regards

Hi ,
System components are those which are providing the basic functionalities on UCM server by default . Standard components are those which are provided as-in on the server but need to be enabled per case basis . For example Framework Folders which is not necessary for the basic functionalities but is needed if user wants to .
This guide gives the administration level overview for UCM : http://docs.oracle.com/cd/E23943_01/doc.1111/e10792/toc.htm
Hope this helps .
Thanks,
Srinath

Integration between primavera 8.1 and Ebiz-Oracle Project

Hi all ,
I need to integrate Primavera p6 v 8.1 with oracle E-busniess suite 12.1.2 is that possible ?
Regards,,
Mohamed

Please see if these docs help.
How to Integrate Primavera with Oracle Projects E-Business Suite? [ID 1091836.1]
Oracle Project Portfolio Management Integration Pack for Primavera P6 and Oracle E-Business Suite 2.5 - Release Notes [ID 959567.1]
Oracle Project Portfolio Management Integration Pack for Primavera P6 and Oracle E-Business Suite 2.5 - Implementation Guide [ID 956562.1]
Thanks,
Hussein

CProjects - Project Systems Linking and other features

Dear All,
              I need inputs on how to integrate cProjects with Project Systems. Also i need information on the what are all the information we can integrate between these two.
              One more important thing is i am seeing the Services, Details Data and Controlling links in My cProjects system. Where as i found Account Assignment, Costing links in one screenshot of Documents. And both are for cProjects 4.0. Why this difference is showing up
              And one generic question is, what is the requirement for these kind of scenarios. And pros and Cons of both the systems.
regards,
rajesh.
Edited by: Guest on Feb 14, 2008 5:59 PM

Hi Srini,
Thanks very much for the links. However, I've already gone through the standard documentation in SAP and they are a bit too high level/vague for me. I have considerable experience in xRPM, cProjects Suite and have good grasp of project management concepts, tool and techniques. My knowledge of PS is somewhat limited though.
What I am specifically looking for is what type integration options and scenarios are available. For example, cProjects can have phases and tasks defined. How would these integrate with for example WBS elements and networks in PS? What are the things you would do in cProjects and not PS and vice versa? Hope my question is clearer now.
Appreciate any further information you may have on the above.
Thanks,
Lashan

Integration between IBM Rational DOORS and Business Process Architect/ARIS

I'm working with AMWAY in Ada, MI that is a big ORACLE shop....They have also invested in a Requirement Management tool, DOORS. They would like to have a bidirectional integration between DOORS and BPA to provide traceablity. Is there any integraton that exisits via Oracle, Oracle Partner, or ARIS/Software AG? They would like to not just have requirements trace to an entire model, instead to a piece(s) of the model. If nothing exists, who can I contact to see if that could be done for AMWAY via $.

Yes, ARIS models can be passed to Solution Manager, and then from Solution Manager to BPM.
Here is how we coonect ARIS to SolMan:
We assume a project in SAP Solution Manager is created, which contains all SAP components to be used, maintained within the SolMan system landscape. Furthermore all settings in ARIS, are accurately done.
The synchronization requires a new folder within the database. This synchronization folder should preferably be created in a seperate area of the database and should be named distinctly.
The connection between the ARIS source database and the project in SAP will be established by importing the project into ARIS.
The context menu of the newly created synchronization folder in ARIS contains a SAP entry (right mouse click). Select u2018Transfer project u2026u2019.
Choose the SAP SolMan project, which was newly created within SAP Solution Manager.
The Solution Manager instance which was preset in the ARIS options is pre-selected.
Enter SAP Client, RFC-User, Password and Language to allow the system to log on the Solution Manager.
The system offers the selection of project, which is available within Solution Manager.
Select the SolMan project you want to use for your implementation.
After confirmation with the button u2018oku2019, the download of the project starts and finishes after a short time.

PI Integration between SAP NW MDM and APO

Hi SDners,
This is a Parts Master Data Solution for one of the Largest Auto Manufacturer where SAP MDM will be the central hub of all the Global and Local attributes of Parts . The subscribing system is SAP SCM APO . Please advice if there is any possibility of direct integration between APO -MDM through PI. Does PI has the standard IDOC types to communicate with APO.
Thanks,
Prabuddha

Hi Roy,
Please search for standard content in SAP Market place. If you have standard content then you can download and install in PI. With standard you can directly use the master data mappings coming from MDM. If either in MDM or APO has any changes from standard then you can do the map accordingly.
PI doesnot hold any idocs, whatever system here in your case APO what ever the master idocs, you can import the metadata and then do the mapping accordingly.
Just for an example you can see on how to do this:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70c83ba5-5c86-2b10-2fbf-9135c4fc248f?quicklink=index&overridelayout=true
Regards,
---Satish
Edited by: Satish Reddy on Jul 19, 2011 4:35 PM

Integration between CRM 5.0 and ERP 5.0

Hi all,
i need to retreive data from a HR module of an ERP 5.0 and import them into a CRM 5.0
How can i connect the 2 systems?
And how can i make the import?
Do you know the steps that i have to follow? there is a guide concerning this topic?
thank you
Dan

Usually in this case you use IDOCs to get the integration done between ERP and CRM. However, you need identify what are the business process, and which IDOC's need to be used for the same.
Here are couple of documents which will tell you what configuration needs to be done.
http://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
Regards,
Ravi
Note : Please mark all the helpful answers

Key Differences between Essbase System 9 and 11

Hi,
I understand that there are several architectural underpinnings that are different between system 9 and system 11. The other day a business user asked me to point out key differences between system 9 and 11.
the first thing that jumped at me was the thin client architecture, where you dont have to install EAS or Studio on to user system..
Can anyone help me tabulate the key differences interms of end user functionality and in terms of developer interfaces.
any inputs would be really appreciated.
Thanks in advance

Hi,
Here are some things I particularly like about System11 Essbase
<li>Ability to store text and dates as measure values (intersection data)
<li>Lifecycle Management & Lifecycle Management API
<li>Single click backup and restore
<li>Attributes that can be changed over time to preserve historical data
<li>ASO Maxl data slice clearing & inversion
<li>Ability to use Environment Variables
<li>Implied Share override
<li>@DateDiff and @DatePart
Here is a comprehensive list of the System 11 new features:
http://download.oracle.com/docs/cd/E12825_01/epm.111/esb_new_features/esb_new_features.htm
Regards,
Robb Salzmann

What is the difference between Projects Auto-Accounting and Receivables Aut

Hi Experts,
Can somebody explain me the difference between Auto-Accounting in Oracle Projects and Auto-Accounting in Oracle Receivables?
Thanks

Hi
Those are two separate accounting engines, one for Projects accounting transactions and the second for AR accounting entries. They share ONLY the term - Auto Accounting.
Projects AA has a very rich functionality and flexibility. AR AA is comparably more rigid.
The AA in Projects allow you to distribute costs, revenue and invoices. Project draft invoices are interfaced to AR with the accounting determined by Projects AA.
AA in AR generates the accounting for invoices generated in receivables, and for other entities like receipts and adjustments.
Dina

Integration between SAP EP6 SP2 and Documentum WebTop Application

Hi all,
We are try to integrate de WebTop Application with the EP6 SP2 using SSO Ticket or using the User/Passward actually logged on EP6, but do not using the User Mapping
Somebody have this experience?
Thanks in advance.
Talis Treichel

Hi Talis Treichel,
Have you found any solution to solve this? I am having a similar scenario in my project and I am using App Integrator for integrating Documentum Webtop
via user id pwd mapping.
But it is giving me an error saying java.lang.null pointer exception.
I guess the parameters its not taking.
Here are some details:
Main Page: http://<server>:<port>/webtop/component/main?Reload=1137919145246&_dmfFrameId=Login_dialog
This page contains user id and pwd.
The view source of this page contains the below information:
<form name=Login_0 action=/webtop/sdk/system/login/login.jsp method=post>
<input type=text name=Login_username_0 id=LoginUsername> <input type=password name=Login_password_0 id=LoginPassword>
Based on the above info I gave the following:
URL Template: <System.protocol>://<System.server>:<System.port><System.uri>?<Authentication>
URL template fraction for user mapping: Login_username_0=<MappedUser>&Login_password_0=<MappedPassword>
Authentication method: POST
Please help how can we solve the null pointer exception problem
Regards
Umamahesh

Integration between third party software and SAP

Hi all,
I have requirement in which i have to integrate SAP with third party software. My third party software will be generating material no as we generate in SAP then after the generation of the Material No by the third party software again i have to pull the material no generated and corresponding information into SAP .Please tell me how to do this as i am new to these concepts and if possible please send links from where i can download study materials.
Thanks and Regards
Manu.

Hello Manvendra,
There are many approches for solving this integration issue:
But before solving this issue there are few questions which need to be known:
1. In what form the material no list is generated? i.e. some flat file, in database table, or shared memory
2. What is the language for 3rd party software? C, Java, .Net etc
3. What is the frequency of material number generation? i.e. is it on demand, batch processing etc
Considering 3rd party software is generating flat file or csv files for material number we can have this integration in
following way:
1. Save file at particular location.
2. You can configure logical path in FILE transaction
3. Write ABAP report to read that file using logical path and file name.
     Refer following link for Link: [logical path creation|http://help.sap.com/saphelp_nw04/helpdata/en/8d/3e4ec2462a11d189000000e8323d3a/content.htm]
4. Read file into internal table using Link: [GUI_UPLOAD|http://saplab.blogspot.com/2007/10/sample-abap-program-to-upload-table.html].
5. Create BDC recording for MM01 transaction for material creation using Link: [SHDB|http://abaplovers.blogspot.com/2008/02/recording-bdc-using-transaction-shdb.html] transaction code.
6. Using data from internal table and BDC recording create all the materials in SAP systems.
    In this step you need to loop at internal table and fill data variables in BDC recording with the internal table data
    and call the transaction MM01 for creating material.
Above steps are very high level guidelines and it is one way of integration but concept wise more or less integration will be in same way!
You can definetly fine tune it by exploring SAP help!
Enjoy SAP!
Thanks,
Augustin.

Integration between SAP POS Triversity and SAP POS DM using XI

Hi Experts,
my company is plannig to integrate SAP POS with POS DM using XI. I need to speak to some 1 who has already gone through the process, as for this there are bottlenecks in 2 areas initially .
1. GM Store Connectivity is an object supposed to be available in market place in .TPZ file needs to be imported into the XI development system. This object is not available in the market place of SAP as per url "
http://sap.com/xi/GMStoreConnectivity. " Without this , I cannot go any further!
2. The PDF file containing entire processing steps " SAP Business Package for Store Connectivity POS Integration
Configuration Guide" Release 2.0 April 4, 2007, is incomplete. Is there any one who can offer me with the latest version of this document in PDF. Or is there any one who has worked with this PDF, so that I can discuss the same .
Thanks in advance to all of you,
Regards,
Arnab

hi
check the below:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ck/te%2b-%2bpost-voided%2btransaction
regards
kummari

General Info on integration between Project Systems (PS) and cProjects

Similar Messages

Maybe you are looking for