General Installation/ Mounted disk images

I am a Mac virgin, having only had my new iMac for 2 weeks. I have recently downloaded/installed some apps (google earth for instance) and notice that if I eject the mounted disk image that the app will no longer run. I can not "hide" the mounted disk in the HD either. It just sits there on my desktop.
Is there no way to rid my desktop of all this clutter? If anything, is there anyway to hide the icons on my desktop like you could on...<ughhh> XP <ughhh>?
Thanks for your help.

What you need to do is quit Google Earth, open the Applications folder (with Finder in front, click the "Go" menu then "Applications") and drag the application into the Applications folder. After it copies, eject the installer diskimage and you can delete it.
Some installers run a program that installs the app and its support files, and others (like Google Earth) just open the diskimage package and show you the application icon, which makes it all to easy to just doubleclick to run. Since diskimages cannot be ejected while files are open, things get messy real fast.
It's a common problem with even experienced Mac users that they continue to run several apps from the diskimage or from their desktop. Hopefully the Leopard version will have this problem fixed.

Similar Messages

  • I updated to Tiger 10.4.11 & cannot mount disk images &other problems.HELP!

    I just updated to Tiger 10.4.11/combo update. I used the stand alone installer (because Software Update since I updated to 10.4.10delta). I repaired permissions before and after the update. Now I can't mount disk images I always get the message "Mount Failed".This occured when downloading and trying to open an existing disk image.I ran fsck, even tried AppleJack all to no avail.I know this problem wasn't there before the update as I downloaded the update and a couple of small utilities and all was well with the world (they all mounted properly). I was doing fine with OSX 10.4.9 but just had to upgrade! Can someone PLEASE HELP ME? I'M grateful for any suggestions and the forums have been good to me in the past.
    badcat53

    Some part of the OS is messed up... I've heard that if you Deltas you must stick with those, if you do Combos you must stick with those, no idea if it's true, as I always use the bigger Combo Updates.
    Most likely the best solution for both of you is an Archive & Install...
    http://docs.info.apple.com/article.html?artnum=107120
    Then apply...
    The combo update for PowerPC-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
    The combo update for Intel-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateintel.html

  • Does Time Machine still ignore mounted disk images? Specifically, encrypted sparse bundle disk images?

    My Time Machine backs up to Time Capsule which cannot be encrypted. I also have confidential data in an encrypted sparse bundle disk image in my home folder. When TM backs up and the encrypted sparse bundle disk image is mounted and I'm accessing the data, does TM back up the data "in the clear" decrypted form or does it exclude the disk image because it's mounted? I've done a little research, but there's conflicting information. Not sure what happens in Lion now...

    Time Machine does not backup mounted disk images! The encrypted sparse bundle disk image was mounted, I updated a doc and did a TM backup - the file was not listed in the TM repository and the doc remained unchanged in the encrypted sparse bundle disk image on TM. Then I ejected the disk image and did a TM backup - the updated doc was backed up in the encrypted sparse bundle disk image! Thank you!

  • How to make iMovie 09 recognize a mounted disk image?

    I'm trying to store video clips in a disk image (Mac OS Extended - Journaled, single Apple Partition Map). Previously in iMovie 08 all I had to do was mount the image, start iMovie and it would recognize it as an additional drive. Then I could drag events to it and store them there. In 09 this does not work. It sees the image but has the yellow triangle/exclamation point in it. I cannot for the life of me figure out how to make it recognize the image! I've tried all variations in disk utility to create the image to no avail. Is iMovie 09 looking for a certain file on the disk image to recognize it? Maybe something in the DS_Store file or the .localized? Very frustrating.
    Hoping someone can help. Thanks.

    jsd2 wrote:
    Try the following:
    Mount the disk image so that there is a disk icon on the Desktop, and then launch Terminal (in /Applications/Utilities).  Copy-paste the following line into the Terminal window, and then type a single space. Do not type <Return> yet:
    sudo mdutil -i on
    After typing the single space, drag the mounted disk image icon from the Desktop into the Terminal window, click inside the Terminal window, and then type <Return>.  Enter your admin password at the prompt (it will not echo on the screen),  and again type <Return>.
    Hopefully that will enable Spotlght indexing on the mounted image. It might take some time to complete depending on the contents.
    The result for this for me, three times, was "Indexing disabled."

  • 10.4.9 and mounting disk images.

    I just recently installed 10.4.9 and now I can't mount any disk images. I get an error saying broken pipe. Any ideas? Thanks in advance.

    I just recently installed 10.4.9 and now I can't
    mount any disk images. I get an error saying broken
    pipe. Any ideas? Thanks in advance.
    Here's what MacFixit says :
    Disk images not mounting [Updated] Several users report an inability mount disk images after applying the Mac OS X 10.4.9 update.
    If you are having a problem where disk images won't mount, try booting in Safe Mode (by holding down the Shift key while starting up), then re-attempting mounting of the disk image.
    This solution is particularly useful for the following scenario: You want to try re-application of the Mac OS X combo updater (a common workaround for issues that occur after an incremental Mac OS X update), but are unable to mount the combo updater disk image.
    Prior to booting in safe mode, however, you can delete the following files:
    * /System/Library/Extensions.kextcache
    * /System/Library/com.apple.kernelcaches
    and re-attempting the mount. These, and other cache files, are automatically deleted when you boot in safe mode, but you can potentially save some time by trying deletion of these files (then logging out and back in) first.
    Another option is to use an alternative tool that can mount disk images, like Mount.app, FlashMount, or Toast Titanium.
    MacFixIt reader Joy Denton is one user who had success with our posted workaround:
    "Just wanted to let you know that I had the issue of Disk Images not mounting. This occurred after installing Mac OS X 10.4.9 from Software Update. Fortunately, I read your post regarding a possible fix by using the Combo Update and used Toast to mount the disk image. Ran the Combo Update and ran AppleJack once again. I am now able to mount disk images. This was an annoying problem to be sure."
    But imho the best advice that can be given about software updates is to always have a clone of your system on another partition or external HD so you can boot on it if anything goes wrong. From an external system you can repair your internal disk, install the Combo update if the incremental one failed, etc.

  • How to make mounted disk image appear in sidebar

    Hi all,
    Previously, I had inadvertently dragged the icon for a mounted disk image off the sidebar. It made the cool "poof" thing. I then checked if it was really unmounted using disk image. It was not, so I unmounted it there.
    Subsequently, when I would mount that disk image, the icon would not appear in the sidebar. If you run into this problem, you can fix it thus:
    1) Go to the Go --> Go to Folder menu item in the Finder.
    2) Enter /Volumes
    3) Drag the icon of the mounted disk image to the disk part of the sidebar
    You will need to aim properly to get access to the sidebar without activating one of the disk icons.
    4) All better
    This started out as a question, but I fixed it and thought someone else could use the info.
    Scott

    Nicely done Scott, thanks!

  • AFP does not allow to access mounted disk-image on server

    I am running a Mac Mini as file and media server.
    With Lion installed, it was possible to access mounted image files on the server via afp.
    Since I upgraded my MacBook Air and the mac mini to Mountain Lion the mounted disk-image is not anymore available as a network drive when accessing the server.
    I figured out that I could still access the mounted image file by accessing the server via SMB. This requires however to connect to the server via CMD K, which is more inconvenient than to just click on the server in the finder sidebar.
    It seems that Apple changed the AFP setup for Mountain Lion and that this is an error.
    Hope they get it quickly fixed in 10.8.1!

    I can't even see my mounted images via SMB... that *****!

  • Auto opening a mounted disk image

    Is it possible to make a (read/write) disk image once it has been mounted to
    automatically open up and show the folder contents?
    I can get this to work if I lock the image, but this makes it a pain to trash.

    jsd2 wrote:
    Try the following:
    Mount the disk image so that there is a disk icon on the Desktop, and then launch Terminal (in /Applications/Utilities).  Copy-paste the following line into the Terminal window, and then type a single space. Do not type <Return> yet:
    sudo mdutil -i on
    After typing the single space, drag the mounted disk image icon from the Desktop into the Terminal window, click inside the Terminal window, and then type <Return>.  Enter your admin password at the prompt (it will not echo on the screen),  and again type <Return>.
    Hopefully that will enable Spotlght indexing on the mounted image. It might take some time to complete depending on the contents.
    The result for this for me, three times, was "Indexing disabled."

  • Can't mount disk image error message for TC

    After a couple of frustrating days trying to get a back-up to my TC to work (time wasted waiting for the process to fail each time - Can't mount disk image error type messages etc) I finally got onto this forum and find quite a few people sharing my problem! I wont wait as long next time I have a problem to enter the discussions, tho I must admit I don't get many problems with my Apple gear.
    There doesn't appear to be a solution in the threads, but at least I am not alone!
    How long before and will Apple fix this?

    DiskImageMounter.app is in /System/Library/CoreServices/.

  • Invisible Mounted Disk Image

    I have a disk image that is encrypted. In opens and mounts as expected on a machine running 10.3.9.
    That same disk image when I attempt to open it on another machine running 10.4.9; prompts for the
    password and appears to mount however it's not visible in the Finder! When I use a utility to "show invisible files"
    it still doesn't appear. If I go to DiskUtility, the volume shows as mounted. It appears with a ls /Volume command in
    Terminal. If it didn't appear on another machine I'd say the disk image was damaged or corrupt but it's only on the
    10.4.9 machine that it doesn't show. Tried a clean "safe" user account - same results.
    I've run all the Maintenance and Disk repairs, Re-did the 10.4.9 (combo) update, DiskWarrior, Drive Genius, etc on
    both the Mounted disk image and the 10.4.9 machine.
    I've also trashed: Finder Prefs, Extensions.kextcache, Extensions.mkext and
    Com.apple.LaunchServices.plist.
    Anyone? Any ideas?
    G5   Mac OS X (10.4.9)  

    Even though the disk image did not appear in a "safe user" account, today I
    logged in Root and low and behold the image mounted (as it had been) but
    this time it was visible appearing on the desktop. I went and changed the
    permissions on the mounted disk image to ignore permissions on this
    volume. Logged back in my normal user account, entered the pw and it
    appeared! The odd thing is have no idea as to how the permissions could
    of previously been changed on an unmounted - encrypted disk image.
    G5   Mac OS X (10.4.9)  

  • Finder crashes when mounting Disk Image

    This is now the second iMac I have seen this happen to and I have no idea what the issue is. OSX 10.4.11
    First, MS Office 2004 (all apps) crash just before opening. I get splash screen, everything loads then crashes.
    So I downloaded the disk image to update MS Office. When I go to mount it, the finder crashes. When it comes back, the disk image is mounted, but any time I click on it, the finder crashes so I cant even get inside the disk image
    This is the case with and and ALL disk images, not just the MS Office update. Ones that were on the computer before this issue and ones I've downloaded.
    I have tried different profiles, deleting finder prefs, changing out fonts, running disk utility and applejack, repairing preferences, etc.. Nothing seems to cure this.
    This is not a Quicktime/Stuffit issue either. QT 7.6 or the latest security update has been installed.
    Any ideas out there. Both machines are in remote locations so I can not easily wipe them and reinstall
    Thanks!!

    It is possible the DiskImageMounter application itself has become corrupted. You could try replacing it with a custom application installation or Pacifist.
    [Custom installs in Mac OS X 10.4|http://support.apple.com/kb/HT1442]
    [Carolyn Samit: Reinstalling applications that came with your Mac|http://discussions.apple.com/message.jspa?messageID=8845395#8845395]
    [Pacifist|http://www.charlessoft.com>
    [Pacifist Documentation|http://www.charlessoft.com/Pacifist_Documentation/English/index.h tml]
    [Kappy: How to Use Pacifist to Replace Deleted or Missing OS X Components|http://discussions.apple.com/message.jspa?messageID=8898275#8898275]

  • Applications Folder appears in mounted Disk Images

    Just lately, when I mount a disk image on my Mac, the entire Applications folder shows up in the window with the contents of the disk image. This didn't use to happen. Is this bad? How do I stop it? Thanks!

    Hi, Jim.
    Are you seeing an alias to the Applications folder? An alias is indicated by a curved arrow in the lower-left corner of an icon.
    Some developers have been adding an alias to /Applications to their disk image so that you can drag their application icon to the /Applications folder alias in their disk image, rather than the /Applications folder itself, to install their app. In other cases, they're including an image of /Applications to illustrate the installation process. Recent examples I've seen of this include the disk images for Firefox and GraphicConverter.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • Mounted Disk Images

    Hope this isn't too dumb a question, but I must admit I've never really fully understood disk images. I suppose my question is: does the icon for the application it represents always have to sit there on my desk top. I ask this based on an experience with Adobe Flash Player. Recently I got the message I needed an update. When I downloaded it I was given instructions that have led to a disk image permanently on my desk top. Yet I'm sure with earlier versions I did not have the Flash Player icon sitting there on my desk top. Is there some way to download things like Adobe Flash Player without having their icon up front staring at me? It seems to me I managed somehow in the past with earlier versions. (I did look through the OS help and on-line with this question before I came here.)
    thanks.
    John

    Think of a disk image (.dmg file) as a CD or DVD.  When you download a .dmg file and open it, it "mounts" to your desktop (the same way when you put a CD or DVD into your computer - it mounts and you can see it on your desktop).
    Install the application either by double-clicking the installer (Adobe Flash is like this) or dragging the application icon to your Applications folder.  Doing either of these installs the application to your internal hard drive.
    Once the install is complete, righ-click (or CTRL-click) the mounted image and "eject" it.  You can then safely DELETE the .dmg file.
    Hope that helps.

  • Time Machine Problems - Won't Launch Automatically, Won't Mount Disk Image

    Hi there,
    I have a MacBook Pro (Mid 2009) running OSX Mavericks 10.9.2.  I've had Time Machine running successfully with a 2TB Time Capsule for some time.  Recently, I reinstalled Parallels VM software and have been having issues with Time Machine ever since.  Initially, I had TM backing up the Virtual Machine, but decided that wasn't a great way to go, so turned it off in the VM configurations pane.
    Since then, however, I have been unable to successfully back up my MacBook.  I notice a few things:
    The Time Machine drive does not mount as it used to.  It does not show up on my desktop.
    When I go into Time Machine Preferences, the drive does not show the usual green disk icon.  The icon is blue and has the stick-figure people on it.
    I can remove the blue disk drive, and re-select the drive.  It stays green for about 30 seconds, then converts to the blue icon.
    I get a number of plist errors in the Time Machine dashboard app.  Here's the latest feed:
    Property list invalid for format: 200 (property lists cannot contain NULL)
    Property list invalid for format: 200 (property lists cannot contain NULL)
    Property list invalid for format: 200 (property lists cannot contain NULL)
    Starting manual backup
    Network destination already mounted at: /Volumes/Sean's Time Capsule
    Disk image /Volumes/Sean's Time Capsule/Sean's MacBook.sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to /dev/disk2s2: /Volumes/Time Machine Backups/Backups.backupdb
    Backup canceled.
    At this point, I'm a bit stumped.  I've tried deleting the old sparsebundle, I've reset the Time Capsule, and I've come up with no ideas as to how I can get this woring again.  It seems like the property list needs 'something' but can't find the old file or the property list is corrupt or something.  I'm assuming that is why the Time Machine disk image won't mount?
    Thanks for your help - suggestions are welcome!

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[45]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}')printf("%s (UID %s) is using %s '${p[$2]}'\\\\n",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ s/ *:$//;x;s/\n//;/Apple|Genesy|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;} ' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/:/;END { if(NR<100)print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { $4="";gsub("  "," ");gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}')print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR==2'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/;END{if(NR<100)print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' '/\.(framew|lproj)/d;/plist:|:.+(M.+exec|scrip)/s/:[^:]+//p' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/;END{if(NR<100)print "/System/"};' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a)print "CPU: "a;if(b)print "I/O: "b;if(c)print "Net: "c" (KiB/s)";if(d)print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' /lR/ { if($2<='${p[25]}')print $2;} ' ' BEGIN { FS=":";} $3~/(sh|ng|ic)$/ { n=split($3,a,".");sub(/_2.+/,"",a[n-1]);b=b"\n"$2" "a[n-1]" "a[n]" "$1;c=c$1;} END { d="sort|tail -n'${p[38]}'";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF=int($NF/10240)} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L)f=f"\n   "$0;} END { F=FILENAME;if(!F)exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(A.+ E.+ text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' /:/{$0="'"${p[28]}"'"};1;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status '-F bsd -k Sender kernel -k Message Req "Beac|caug|dead[^bl]|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN" -k Message Rne "Goog|ksadm|SMC:" -o -k Sender fseventsd -k Message Req "SL"' '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /usr/local/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n 'syscall::'${p[33+j]}':return {@out[execname,uid]=sum(arg0)} tick-10sec {trunc(@out,1);exit(0)}'";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP RSSI Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v[0]=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "${v[0]}" ]];};A'$((3+i))'() { v[0]=` while read i;do eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "${v[0]}" ]];};A'$((5+i))'() { v[0]=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "${v[0]}" ]];};';done;A7(){ v[0]=$((`date +%s`-v[3]));};B2(){ v[$1]="${v[0]}";};for i in 0 1;do eval ' B'$i'() { unset v[0];((v['$((i+1))']==0))||{ v[0]=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v[0]=` paste -d: <(echo "${v[$1]}") <(echo "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v[0]=`grep -Fv "${v[$1]}"<<<"${v[0]}"`;};C0(){ test "${v[0]}"&&echo "$_";};C1() { [[ "${v[0]}" ]]&&printf "${f[$1]}" "${l[$2]}" "${v[0]}";};C2() { v[0]=`echo ${v[0]}`;[[ "${v[0]}" != 0 ]]&&C1 0 $1;};C3() { v[0]=`sed -E "${s[0]}"<<<"${v[0]}"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D22 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A4 14 6 11 0;B2 0 5;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A4 14 7 11 6;B2 0 7;B3 4 0 22;A4 14 6 11 0;B2 0 8;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D23 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;D22 32 31 43 38;D23 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-  
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Problem with mounting disk images

    I have recently downloaded a media player and have had some problems. When I download the file to my desktop and try to run it, it gives me a "warning" window. In the window, it says that "the following disk images failed to mount" and gives "device not configured" as the reason. The file on the desktop's path is .dmg just to be more clear. So...yeah...any advice??
    Jay

    Just to make sure (I don't think this is your problem, but it's easy to check), make sure /System/ Library/ CoreServices/ DiskImageMounter.app is present on your Mac.
    Do you have another user account on your Mac? If necessary, use System Preferences> Accounts to create a new troubleshooting-only administrative user account. Check if that new user account can open .dmg files. If it does, that indicates a problem with the preferences in your normal user account. Use Preferential Treatment to scan your prefs. You can also drag the ~/Users/ [yourusername]/ Library/ Preferences folder tot he desktop, log out and back in, and see if .dmg images work, then move your prefes back from teh Preferences folder on the Desktop to the one in ~/Users/ [yourusername]/ Library. Or you might just try moving these prefs to the Desktop:
    /Users / [yourusername]/ Library/ Preferences/ com.apple.frameworks.diskimages.uiagent.plist
    and com.apple.LaunchServices.plist
    If the troubleshooting user account also shows the problem, first run Disk Utility/ Repair Permissions. If that doesn't fix the problem, try running the OS X Update Combo 10.4.7 (Intel) (using Disk Utility to expand that .dmg file after downloading).

Maybe you are looking for