General Key Figure Monitor doesn't display data in the portal
Hi...
I have configured the general key figure monitor in SPRO. I executed the program KFM_VALUE_DET_SCHEDULE. When I execute the portal iview using the context id, the key figure data does't display. The context id is set to the key figure category.
Any ideas?
Hi
Thanks, that was just what I was looking for.
I have verified that it is the right task, but unfortunately I still have an issue.
If I add tasks like uwl.task.webflow.default.TS92000077 or uwl.task.webflow.TS92000077 in a view under Support Itemtypes, then these tasks are still not shown in my list.
If I add another task that exist in the default configuration file (under system registration) then it works fine.
Please look at the two screendumps under item Type. In the screendump that works the complete name is shown under Item Type and in the other case only a prefix call default is displayed.
http://webdata.dk/uwl/works.jpg
http://webdata.dk/uwl/fails.jpg
Am I missing some configuration in the backed or does anyone have any idea where this information is received from?
Thanks in advance
Cheers
John Stubbe
Similar Messages
-
Key Figure Monitor in Prod Superviosr business package
hi,
I am trying to set up Key Figure monitor in the Production supervioser business package. I am getting the below error
Invalid/No Context ID
The application 'Generic Key Figure Monitor' requires a unique context ID. The context ID is a four-character alphanumeric code that you must enter as the application parameter I_CONTEXT_ID in the starting iView in the Enterprise Portal.
Contact your system administrator
I have set up the I_CONTEXT_ID in the iview in Portal and defined the key figure categories and key figures in R3.
I would like to knwo the relation between I_CONTEXT_ID and Key figure and where is it set ?
Can some one help in the steps to get this working.
Appreciate your help
Regards
PN
Message was edited by:
Portal NewbieNot sure if you got an answer for this question. Just saw this..
See SAP Help URL http://help.sap.com/saphelp_erp2005/helpdata/en/42/ef6861370a1bcae10000000a11466f/content.htm
Excerpt below from SAP Help on Context ID:
Including the Generic Key Figure Monitor in the SAP NetWeaver Portal
Use
You only have to carry out this procedure if you want to put together your own portal role using various parts developed by SAP or by yourself.
Prerequisites
· You are in the content administration for the Portal.
· You have created a role in the portal.
· You want to include the KEY_FIGURE_MONITOR iView from the Common Parts business package in the portal page of your role using delta link. The iView is called Key Figure Monitor.
· In the I_CONTEXT_ID parameter, you have created a unique four-digit alphanumerical key for the generic key figure monitor that identifies an instance of the key figure monitor within the role. If you want to use the key figure monitor more than once in your role, you must create a unique key each time you use the generic key figure monitor in the role.
You have created a role in the portal. This role contains two iViews, which contain the generic key figure monitor. iView aaa.bbb.ccc and iView xxx.yyy.zzz. Set the following values in the Property Editor for the iViews in the property category Application Parameters:
§ For the iView aaa.bbb.ccc: I_CONTEXT_ID=1111
§ For the iView xxx.yyy.zzz: I_CONTEXT_ID=2222 -
Good Night.
I am implementing MSS with BP 1.41 and ECC 604.
In the moment of run the workset Work Overview the system display the messsage of error of the following link
[Key Figure Monitor |http://www.freeimagehosting.net/uploads/be4c81b139.jpg]
Someone can help me with the cause of this error, please.
RegardsGood Morning kaushal kishore
The issue was solved with your suggestions.
But now the portal display the following message :
Key Figure Monitor
No Administrator Key Figure variants found.
The current key figure view does not containt any key figures.
Regards -
Error when launching Key figure monitor iview in portal
Hi all,
I get an error when launching a key figure monitor iview in portal ; the error is RABAX-STATE
In r/3 under transaction ST22 i got following :
"UNCAUGHT_EXCEPTION" "CX_WDR_RT_EXCEPTION"
"CL_WDR_INTERNAL_WINDOW========CP" or "CL_WDR_INTERNAL_WINDOW========CM00B"
"IF_WD_WINDOW~SUBSCRIBE_TO_BUTTON_EVENT"
Anybody knows how to resolve the problem?
Regards
GwenHey was your problem resolved ???
I am facing the same problem..
please help!!!
reply asap.
~Veena. -
Scorecard doesn't display data for some selections
Hi,
I have configured a scorecard to display detail data (product quantities for 4 quarters) based on different parameter (product code) selection in other master scorecard. The detail dashboard doesn't display data for all the product codes. It's weird even data is there for the same product code where the scorecard is mapped in the excel however doesn't display. Appreciate if any of you can help me to overcome the issue.
Technology: SAP Dashboard 4.1 SP4, Oracle 11g
Thanks,
AnuragHi Anurag
Have you taken an excel snapshot and checked if the master scorecard has the rows you expect to see in the detail sorecard?
Thanks
Runali -
Display data in the form of subgrouping of a table.
hi,
i need to display data in the table in the below format
1 1000 header1 quantity amount
item1 100 200
50 500
2 1001 header2 chairs 5000
item2 50 100
100 1000
plz help me how to do thisHi Praveen,
Please check 'Grouping' view in component WDR_TEST_TABLE .
It will give you some idea.
Regards,
Sumit -
FF 3.6.6 doesn't display bookmarks in sidebar, but a search in the sidebar shows they are still there. It does display them from the menu bar. It doesn't display bookmarks in the "organize bookmark" display. It doesn't save tabs on exit. Doesn't save browser screen size.
With so many issues with your current profile it would be better to try a new profile.
Be careful with what you copy to that new profile and it sounds that at least you have problem with places.sqlite and maybe prefs.js and localstore.rdf as well.
First test that new profile without copying files and installing extensions.
Create a new profile as a test to check if your current profile is causing the problems
See [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
A conversion error occurred while the program -- display data on the screen
HI all,
Iam getting a dump error described below:
A conversion error occurred while the program was trying to
display data on the screen.
The ABAP output field and the screen field may not have the
same format.
Some field types require more characters on the screen than
in the ABAP program. For example, a date field on a screen needs
two characters more than it would in the program. When attempting to
display the date on the screen, an error will occur that triggers the
error message.
Screen name.............. " Ztable_MM_MRQ "
Screen number............ 0100
Screen field............. "WA_PO_ITEMS-MENGE"
Error text............... "FX015: Sign lost."
Further data:
Give us step by step procedure to rectify the same with T.codes
Thanks
Regards
SirajRaymond
please give details in se51 where i have to put a "V" to allow negative amounts
whether it is in Text or I/O templates
name type of screen element Text or I/O field
WA_PO_ITEMS-MENGE Text PO_quantity__
regards -
Need to display data on the right side in the header area of alv report.
hi experts,
I want to display data in the header area of alv report on the right side . I have already used function for events on the header side data is getting displayed on the left side .but i want data to be displayed on the right side.
regards,
andrews.Hi,
Hope this below code helps you.
Take care,
Çağatay.
* build header for alv
FORM top_of_page_split USING r_top TYPE REF TO cl_dd_document.
DATA: s_tab TYPE sdydo_text_table,
c_area TYPE REF TO cl_dd_area,
text TYPE sdydo_text_element.
TYPES: BEGIN OF tab_text,
text TYPE sdydo_text_element,
END OF tab_text.
DATA: i_text TYPE TABLE OF tab_text.
DATA: w_text TYPE tab_text.
CALL METHOD r_top->initialize_document.
CALL METHOD r_top->vertical_split
EXPORTING
split_area = r_top
split_width = '70%'
IMPORTING
right_area = c_area.
CONCATENATE sy-datum+4(2)
sy-datum+6(2)
sy-datum(4)
INTO date1.
CONCATENATE 'DATE' date1
INTO w_text-text
SEPARATED BY ':'.
APPEND w_text TO i_text.
CONCATENATE 'time:' sy-uzeit INTO w_text .
APPEND w_text TO i_text.
CONCATENATE 'uesr:' sy-uname INTO w_text .
APPEND w_text TO i_text.
CONCATENATE 'local date:' sy-datlo INTO w_text .
APPEND w_text TO i_text.
CONCATENATE 'time zone:' sy-zonlo INTO w_text .
APPEND w_text TO i_text.
s_tab[] = i_text[].
CALL METHOD c_area->add_text
EXPORTING
text_table = s_tab
fix_lines = 'X'
sap_fontsize = cl_dd_document=>medium
sap_emphasis = cl_dd_document=>strong.
CALL METHOD r_top->add_gap
EXPORTING
width = 60.
text = 'THIS IS REPORT HEADING'.
CALL METHOD r_top->add_text
EXPORTING
text = text
sap_emphasis = 'STRONG'.
CALL METHOD r_top->new_line.
CALL METHOD r_top->add_gap
EXPORTING
width = 70.
text = 'THIS IS REPORT HEADING1'.
CALL METHOD r_top->add_text
EXPORTING
text = text
sap_emphasis = 'STRONG'.
CALL METHOD r_top->new_line.
CALL METHOD r_top->add_gap
EXPORTING
width = 80.
text = 'THIS IS REPORT HEADING2'.
CALL METHOD r_top->add_text
EXPORTING
text = text
sap_emphasis = 'STRONG'.
CALL METHOD r_top->new_line.
text = 'Report Subheading1'.
CALL METHOD r_top->add_text
EXPORTING
text = text
sap_emphasis = 'NORMAL'.
CALL METHOD r_top->new_line.
text = 'Report Subheading2'.
CALL METHOD r_top->add_text
EXPORTING
text = text
sap_emphasis = 'NORMAL'.
CALL METHOD r_top->new_line.
text = 'Report Subheading3'.
CALL METHOD r_top->add_text
EXPORTING
text = text
sap_emphasis = 'NORMAL'.
CALL METHOD r_top->new_line.
ENDFORM. "TOP_OF_PAGE_SPLIT -
Possible to access data outside the portal?
Hi all,
Im currently checking the features available in the adobe forms.
Is it possible to dynamically load an adobe form (for example drop downs)
with data outside the Portal,
Using maybe Web services?
And send data from the adobe form to the portal by webservices,
without having to upload the form,
Is this possible?
Thanks in advance for the help.
Best regards,
Paulo RuivoIn Designer in the SAP development environment, you can specify a Data Connection based on a WSDL (Web service). If you tie the update of these fields to e.g. a button, you can update the related fields in the form at runtime.
In general, you don't send data to the Portal, which is basically a frame in which you run different applications. The data is usually sent to the SAP db through an application using the form. You can use HTTP/Web services to submit data to the SAP application/database, but this is independent of the Portal.
Kind regards,
Markus Meisl
SAP NetWeaver Product Management -
Hierarchy variable inpu help not displayed correctly in the portal
Hi ,
I have a problem when trying to select Hierarchy in the variable selection screen hierarchy is not being displayed
correctly in the portal/browser . When running the same report in BEX Analyser and in RSRT with HTML option the
hierarchy displays correctly in the variable selection screen .
In Portal Var selection screen Hierarchy is displayed side by side ie horizontally not level by level.
Please help.Thanks Venkat, Problem is solved with the note u mentined
-
To extract portal activity data from the portal into Solution manager.
HI all,
I need to extract the portal activity data from the portal into Solution Manager BI and then later on into the SAP BW in order to generate BEx reports on the portal activity data. I need to know about the configuartions that are needed to be done on the portal side and the solution manager side so as to get the data into SolMan from portal. Waiting for a response.
Thanks and regards,
Divya.Hi
In solution manager you can do the analysis of the ADC data files (Portal activity reporting) as as part of the End-to-End Diagnostics (Portal Activity Reporting tab in the End-to-End Workload Analysis).
Will you see the Portal Activity Reporting tab under End-to-End Workload Analysis?
by default PAR in SAP Solution Manager 7.0 EHP1 is deactivated ,since we requires
some manual configuration of the Activity Data Collector.
please follow the attached config guide in the SAP note for configuration.
Jansi -
Whether we can able to save the data in the portal side or not?
Hi All,
Could anyone please tell me, whether we can able to save the data in the portal side or not, if possible can you please explain the procedure.
Thanks in advance,
Siva.If you are familiar with java then you can use the usual jdbc / odbc driver to connect. Do search the forums, this has already been discussed many times before, if you encounter a road block do post back.....
You can also refer to this blog, though it talks about CE 7.1 the concepts remain the same, the configuration screens might differ - Connecting an Application to an External Database in SAP NW CE 7.1
Did some searhing for you refer these also
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70929198-0d36-2b10-04b8-84d90fa3df9c&overridelayout=true
How can I set the data binding between Web Dynpro & Database table
Connect to External Oracle Database
Urgent : Hoe to connect to a ORACLE database throught WEBDYNPRO JAVA <-- good one
Thanks,
GLM
Edited by: GLM on Aug 18, 2009 11:38 AM
Edited by: GLM on Aug 18, 2009 11:41 AM -
Webi SelectionScreen based on BEx variable doesn't display dates correctly
Hi,
BEx query has a date variable. When this BEx query is executed in BW, the date variable shows a calendar in F4 selection screen.
Webi is built based on this BEx query which is using the BEx date variable. When Webi is executed, in the selection screen, list of dates are displayed instead of a Calendar. Also, the list doesn't not contain all the dates.
Please suggest how to get the calendar in the Webi Selecton Screen for Date field or atleast suggest how to get list of all dates in the webi selection screen.
Thanks,
Sai.Hi,
Use this
<FILTER KEY="ZV_DATE"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="@Prompt('Date (Previous Day)','D',,mono,free )"/></CONDITION></FILTER>
- Changed 'A' to 'D' to set from Alphanumeric to Date (might give prompt in date format and calendar option)
- Removed the reference to the LOV (which i think would remove the reference to getting values from BW)
- Changed primary_key to free (which i think would allow the user to enter values themselves) -
Very Very Urgent Issue: Restricted Key Figure does not return any data
Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any dataHi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW
Maybe you are looking for
-
Error in Message Mapping "Target message IDOC: ORDRSP.ORDERS02 does not exi
Hi, I have joined newly to the team. When I tried to open one message mapping it throwinf follwing error... "Target message IDOC: ORDRSP.ORDERS02 does not exist in software component version ID: 44423362454456485465.. Check whether the software compo
-
How to restrict closing the tab in tabpane after clicking the close button.
Hi all, Greetings. I am implementing a TabPane with different 'user form's in each Tab. And all the tabs are *'closable'*. If the user enters some data in the form, and tries to close the tab without saving the form , i need to show a confirm dialogu
-
Difference Between 2 dates using variables in ODI
Hi, I have 3 variables in ODI, Start Date, End Date and Duration. Start Date - Alphanumeric - select TO_CHAR(SYSDATE,'DD-MM-YYYY HH24:MI:SS') FROM DUAL End Date - Alphanumeriic - select TO_CHAR(SYSDATE,'DD-MM-YYYY HH24:MI:SS') FROM DUAL Duration - A
-
Who can help me about the "Quartz Enterprise Job Scheduler"?
i do not kown how to use that .
-
I was able to text a friend before a d then my Samsung phone updated and now it is just one person it will not let me receive texts from and they have not been removed or blocked help!