General naming and userid standards question

Anybody care to give their opinion on naming standards to use when deploying EBS?
My understanding is generally oracle own's the database and applmgr owns the application tier. Is that an oracle standard?Correct.
What about Test and Dev environments and is it common practice to use different userid's for them (ie 'appltst' for Test app tier).You could either user applmgr/oracle for each environment, or just use the appl<sid>/ora<sid>, both should be valid -- The latter is less confusing.
My other question is whether the database should be owned by oracle or not on a server shared by others non-ebs databases.
Any opinions/best practices?Database should be owned by oracle, and it is recommended not to have any other database running on the same server. This also depends on the hardware resources on this server and what type of environment (i.e. Prod, UAT, Test, Dev, ..etc).
The directory naming standards I think we can develop on our own so I am not as concerned about that unless I am overlooking something.Correct, you could just go with the default when you do the installation (as RapidWiz suggests) and make sure you are laying down the software under the correct mount point.
Thanks,
Hussein

Similar Messages

Naming and development standards in XI

Can anyone provide standards/best practices for XI development? Including naming: namespaces, message interfaces, message types, SLD components like SWCVs. Are there any available design standards while designing interfaces in XI ? Please let me know.

Hi Pavan,
for templates refer to <a href="/people/michal.krawczyk2/blog/2005/04/09/xi--saps-document-templates - SAP's document templates</a> and to section documents on <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions's XI Faq</a>
Finally, here is a link for <a href="http://help.sap.com/bp_bpmv130/index.htm">SAP Exchange Infrastructure best practices</a>
Hope this helps!
Kind Regards,
Sergio

OWB Naming Conventions and Development Standards

Hi all,
I am developing a project in OWB. Could any one give me 'OWB Naming Conventions and Development Standards' document.

Hi,
You want to post this to the OWB forum:
Warehouse Builder
Thanks, Mark

Naming Conventions and Development Standards'

Hi all,
I am developing a project in OWB. Could any one give me 'OWB Naming Conventions and Development Standards' document.
Thanks

Hi,
You want to post this to the OWB forum:
Warehouse Builder
Thanks, Mark

Creating Icons/Graphics for High DPI Displays, naming and sizing

I'm having to create and deliver graphics and icons for a native desktop windows applications that must support Windows 8.1 and variety of screen resolutions which ranges from standard resolution monitors to new 4k high density displays.
Typically for iOS you would deliver an icon using the following size and naming convention to support both standard and Retina 2x devices.
Standard Resolution
Icon-72.png (actual size 72x72 pixels)
Retina Display
[email protected] (actual size 144x144 pixels)
For Android on a 4k device, you might do the following:
[email protected] (actual size 288x288 pixels)
My question is would you also follow this same naming and sizing convention for native Windows 8.1 desktop apps? I'm assuming you would, but I'm getting some pushback.
This is slightly new territory in Windows desktop, but I'm hoping there may be a few who have experience and offer there suggestions.
Thank you and best regards,

You will probably get better feedback in the forum for the picture program you are using... what is that program? (Photoshop?)

HT201269 When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a serve

When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. scree

Not sure that I have selected the correct forum. Hope my questions are clearly stated.
Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. screen resolution choices). It does not show Mail or Safari menus. System preferences' display "gathered" the Samsung and chose its resolution. I did not find a way to select the Samsung as my display.
In addition to having old hardware, we have Verizon FIOS providing internet and TV access. Is there any way to make this work for us? We would like to stream video (Netflix) and view shows from the Web. Do we need Apple TV to do this? Or is it not possible with our old iMac? My husband thinks that our Airport could be a factor.
Thank you

Lately, I have been seeing a lot of posts with users trying to use their Macs/iMacs to mirror their streaming video from their Macs to an HDTV.
There are, actually, many alternatives to choose from than just from a Mac.
You need to have or invest in a WiFi capable router for all of these examples.
Apple TV only integrates with WiFi and newer Mac hardware. So, if you want to have total integrated experience, if you have a 2011 Mac or newer, you might as well pay the $100 for the AppleTV box.
If you have a older Mac, like I have noticed many users do, then you have other options.
If you want to elimate long cable clutter and having your Mac at the mercy of your TV all of the time, you can still use the AppleTV box independently or purchase cheaper alternative media streaming boxes from Roku, Sony, Boxee or any number of electronics manufacturers that now have media streaming boxes and media streaming capability built into DVD/Blu-ray players.
These eliminate long cable clutter by being close to the HDTV where shorter, less expensive cables can be used.
Another alternative for iPad users is to use an iPad with the USB/HDMI video adapter and use your iPad as the streaming box. This ties up your iPad in much the same way as it does with your Mac, but again the iPad can be close to the TV and use minimal cables to the TV.
Another alternative to is to use a combination of an iPad and your Mac to stream content that is only available to stream online from a computer. In this case, you can use a desktop remote app on your iPad and Mac. A good and cheap Desktop Remote app is Splashtop Remote. This allows you to completely connect your iPad remotely, over Wifi, to your iMac desktop. The app streams both video and sound to the iPad which is still connected to your HDTV. The resultant stream video picture will be smaller than the size of your HDTV, but it will still be plenty large enough to watch. Again, if you own a iPad and an Intel Mac, this method also allows minimal cabling to the TV.

Apple ID issue - Cannot modify a standard question

I cannot order books/prints from iPhoto as I have been unable to set up my Apple ID account in iPhoto. I have tracked the problem down to the fact that I am unable to update my profile password question/answer. I have tried to do this via myinfo.apple.com and the apple store account settings, and I get the following error:
Cannot modify a standard question
Earlier this year, this message was accompanied by the error number -20148.
Has anyone else had this problem?
I have spent over 10 hours on the phone with Apple Care and they have been unable (unwilling) to help fix this problem (which seems to be that the Apple ID database is corrupt).
Also, has anyone else experienced being brushed off by Apple Care with a problem they were unable to solve?

If all else fails can you just create a new account? You may be thwarted by your email address however as that's usually part of the account info that Apple looks at for duplication. it's worth a try however. If you have a .Mac account you could create an alias email name and use it.
OT

Adding a RAID card to help speed up export (and other drive question) in Premiere Pro CC

First of all, I have read Tweakers Page exporting section because that is where my primary concern is. First my questions, then background and my current and proposed configurations:
Question 1: Will adding a hardware RAID controller, such as an LSI MegaRAID remove enough burden from the CPU managing parity on my software RAID 5 that the CPU will jump for joy and export faster?
Question 2: If true to above, then compare thoughts on adding more smaller SSDs for either a one volume RAID 0 or smaller two volume RAID 0 to complement existing HDD RAID 5. That is, I'm thinking of buying four Samsung 850 Pro 128 GB SSDs to put in a four disk volume to handle everything (media/projects, media cache, previews, exports), or split it up into two volumes of two disks each and split the duties, or keep the four disk volume idea and put the previews & exports on my HDD RAID 5 array.
The 850's are rated at SEQ read/write: 550/470 MB/s thus I could get around 2000/1500 MB/s read write in a four disk RAID 0 or 1/2 that if I split into two volumes to minimize volumes from reading/writing at the same time, if that really matters with these SSDs?
The Tweaker's page made a few comments. One is splitting duties among different disks, rather than a large efficient RAID may actually slow things down. Since the SSDs are much faster than a single HDD, I'm thinking that is no longer accurate, thus I'm leaning toward the Four disk configuration putting OS & Programs on C drive, Media & Projects on D (HDD RAID 5), Pagefile & Media Cache on SSD (2-disk RAID 0) and Previews &Exports on 2nd SSD RAID 0 (or combine the two RAID 0's and their duties).
Just trying to get a perspective here, since I haven't purchased anything yet. Any experience/stories, I would appreciate.
My current drive configuration:
My D drive is software RAID 5 consisting of four 1 TB Western Digital RE4 (RED) 7200 RPM HDDs with a CrystalDiskMark SEQ Read/Write of 339/252 MB/s.
The C drive is SSD 500 GB (Samsung 840 (not Pro) and does 531/330 MB/s. My OS, Program Files and Page File are on C, and data/media files/project, etc all are on the RAID drive.
Problem:
Current setup allows for smooth editing, only the exporting seems slow, often taking between two and two and a half times the video length to export. Thus a 10 minute video takes 20-30 minutes to export. 15 minute video can take 30-40 minutes to export. The first 10% of the two-pass export takes under a minute (seems fast), but it gets slower where the final 10 or 20% can hang for many minutes like my system is running out of steam. So where is the waste?
I have enabled hardware acceleration (did the GPU hack since my GPU isn't listed) and it may spike at 25% usage a few times and eat up 600 MB of VRAM (I have 2 GB of VRAM), otherwise it is idle the whole export. The CPU may spike at 50% but it doesn't seem overly busy either.
Our timeline is simple with two video streams and two audio streams (a little music and mostly voice) with simple transitions (jump cuts or cross dissolves). We sometimes fast color correct, so that might use the GPU? Also, since we film in 1080 60P and export 1080 29.97 frames/sec, I think that is scaling and uses the GPU. I know without the GPU, it does take a lot longer. I have ruled out buying a faster GPU since it doesn't appear to be breaking a sweat. I just need to know if my system is bottlenecked at the hard drive level because I'm using software RAID and my disks are slow and will hardware RAID significantly reduce the CPU load so it can export faster.
Our files are not huge in nature. Most our clips are several MBs each. Total project files are between 5 GBs and 10 GBs for each video with Windows Media File export being 500 MB to 1.2 GB on average. We shoot using Panasonic camcorders so the original files are AVCHD, I believe (.MTS files?).
Considerations:
1. I'm thinking of buying (and future proofing) an LSI Logic MegaRAID 9361-8i that is 12Gb/s SAS and SATA (because some current SSDs can exceed the 6Gb/s standard).
2. I'm not replacing my current RAID 5 HDDs because not in my budget to upgrade to 6 or more large SSDs. These drives are more important to me for temporary storage because I remove the files once backed up. I don't mind a few inexpensive smaller SSDs if they can make a significant difference for editing and exporting.
I can only guess my HDD RAID is slow but the CPU is burdened with parity. I would imagine running RAID 10 would not help much.
My setup:
my setup:
CPU - i7-3930K CPU @4.5 GHz
RAM - G.SKILL Ripjaws Z Series 32GB (4 x 8GB) DDR3 2133 @2000
Motherboard - ASUS P9X79 WS LGA 2011
GPU - Gigabyte GeForce GTX 660 OC 2GB (performed the compatibility list hack to enable hardware acceleration).
C drive - 500 GB Samsung 840 SSD (Windows 7 Pro 64 bit and programs).
D drive - four 1 TB WD RE4 Enterprise HDDs 7200 RPMs in software RAID 5
Case - Cooler Master HAF X
CPU Fan - Cooler Master Hyper 212 EVO with 120 mm fan
Power Supply - Corsair Pro Series AX 850 Watt 80 Plus Gold
Optical Drive - Pioneer BDR - 208DBK
thanks in advance,
Eric

........software RAID 5 off the motherboard ??????......NOT a good idea, from what I have read here on this forum from experts like Harm Millard and others. They have mentioned a LARGE overhead on the CPU doing this....causing sub-par performance. RAID 0 off the motherboard will NOT do this, however.....RAID 0 would provide optimum speed, but, with the risk of total data loss if ANY drive fails. You may wish to reconfigure your RAID to be RAID 0...BUT...you would need to DILIGENTLY back up its entire volume onto perhaps a quality 4TB drive very frequently.
A lot depends on the nature of your current and FUTURE codecs you plan to edit. You may not want to sink a lot of money into an older setup that may have trouble with more demanding future codecs. For now, in the 1080p realm, your rig should be OK....the read/write performance on your CURRENT RAID 5 setup is not great, and a definite drag on the performance. The rest of your components appear to be fine.....the Samsung SSD, though not ideal, is OK.....it's write speed is WAY lower than the Pro model,but, the drive is used mainly for reading operations. Since you have Windows 7 Pro, and NOT Windows 8.......you CAN put the entire windows page file onto the RAID 0 you might create.....this will take that frequent read/write load OFF the SSD. Read the "tweakers Page" to see how to best TUNE your machine. To use your current setup most efficiently, without investing much money, you would :a. create the RAID 0 off the motherboard, ( putting all media and project files on it ) b. install a quality 7200rpm 4TB HDD to serve as a BACKUP of the RAID array. Then, install a Crucial M550 256GB or larger SSD, ( close in performance to Samsung 850 Pro...much cheaper), to put all previews, cache , and media cache files on....AND to use as " global performance cache" for After Effects...if you use that program. Exporting can be done to ANOTHER Crucial M550 for best speed...or, just to the either the FIRST Crucial or, the 4TB drive. Your current GPU will accelerate exports on any video containing scaling and any GPU accelerated effects. Your CPU is STILL important in SERVING the data to and from the GPU AND for decoding and encoding non-GPU handled video....your high CPU clock speed helps performance there ! You may want to check out possibly overclocking your video card, using MSI Afterburner.or, similar free program. Increasing the "memory clock speed" can RAISE performance and cut export times on GPU effects loaded timelines,or, scaling operations. On my laptop, I export 25% faster doing this. With my NEW i7 4700 HQ laptop, I export in the range of your CURRENT machine....about 2 to 3 times the length of the original video. PROPERLY SET UP...your desktop machine should BLOW THIS AWAY !!
Visit the PPBM7 website and test your current setup to possibly identify current bottlenecks,or, performance issues. THEN, RE-TEST it again, after making improvements to your machine to see how it does. Be aware that new codecs are coming (H.265 and HEVC,etc.) which may demand more computer horsepower to edit, as they are even MORE compressed and engineered for "streaming" high quality at a lower bandwidth on the internet. The new Haswell E...with its quad-channel memory, 8 core option, large number of PCI gen. 3 lanes, goes farther in being prepared for 4K and more. Testing by Eric Bowen has shown the newer PPro versions provide MUCH better processing of 4K than older versions.

Iwent to tools to clean up cookies on computer but there is no internet options just options I was told to go to general bab and look for delete cookies why doesn't Firfox have this option

I finally got instructions on how to defrag my computer, I wanted to now remove the cookies that my computer has to help speed up the computer. I was told as mentioned in the above question I was to go to Tools then click on Internet Options there is only options, then go to general tab and click on delete cookies I did go to general through options but nothing there to help me get rid of the unwanted cookies. Do you have any suggestions on what I can do
thank you
Hilry

Hi P,
You're very close. It's the Privacy tab right next to Security.

Vendor evaluation - General Service and support

Hi
What are the subcriteria that can be under General Service and support?
How the scores are calculated for this?\
If manual where can we enter the scores for these?
Regards
Soumen

Hi,
Following are the answers for your questions.
What are the subcriteria that can be under General Service and support?
Ans: - Subcriteria can be defined by us as per our requirement but SAP has provided following 2 Subcriteria;
- Quality of service
- Service timeliness
How the scores are calculated for this?
Ans: - For above 2 subcriteria, you can assign a scoring method as following;
C Determination from quality rating of service
D Determination from timeliness rating of service
Config Path: - SPRO > MM > Puchasing > Vendor Evaluation > Define Criteria > Here maintain subcriteria for Service criteria and assign the scoring method
At the time of processing Service Entry Sheet, under "Vendor evaln" Tab, you will have option to enter scores for the following subcriteria
- Quality of service
- Service timeliness
Once you enter scores here, it will get calculated in ME61, if automatic evaluation is configured for above 2 subcriteras
Config Path: - SPRO > MM > Puchasing > Vendor Evaluation > Define Purchasing Organization Data for Vendor Evaluation > Here for Service criteria and it's subcriteria do not activate manual maintenance indicator
If manual where can we enter the scores for these?
Ans: - And if you want to maintain values manually for Service criteria and subcriteria then activate the manual maintenance indicator in above config path and then maintain it duirng ME61 (Vendor Evaluation)

Oliver Wright Class A Reporting and SAP Standard Cube

Dear All,
has someone experiences with Class-A KPIs Reporting in SAP based on the concept of Oliver Wright?
In his handbook he wrote that this concept reflects the effort and effort and achievement of thousands of client companies who have used our checklist standard to differentiate their business. So its supposed that SAP Standard might also support that concept in general by providing eventually standard cube if this trendy in U.S.
Does SAP support that concept or do you know who is there an third party software available to read this KPI out of SAP/APO in a structured way
see link: http://www.oliverwight.com/checklist.htm
Thanks for your support, Markus

In my experience, you just have to learn to read the code. The SAP books may tell you something but they are not at the level that you'd really need them to be if you wanted to know where best to put your enhancement.
It is certainly worthwhile checking all the documentation in the classes/methods there can be some useful things there. However, generally I think you are just better off reading through the code and working out how it all hangs together. Most WDA code is reasonably well written - in that it is fairly modular and has a reasonable degree of encapsulation. This certainly helps.
This is where experience really starts to matter!
NW7.02 will give us some nice UML diagrams to help understand the application flow - that will help, but until then, it's just a matter of being good at understanding code.
Good luck.
Chris

Standard and Non-standard exports and queries issue

Hi,
We have created a few STANDARD books with standard exports in them. The standard exports use standard queries.
The ISSUE is that in the Verifications/Filters tab, where we have put in a lot of queries - ONLY the STANDARD queries show up. We would like to have all the queries show up. I am the adminsitrator and still only the standard ones show up.
I am worried that if I "Save As" the export as a non-standard export, it does not allow me to uncheck the standard tick column and save it but I have to manually change the name of the export. Can we change this in anyway?
Is there a system preference where I can allow all the queries to show up in the verifications/filter tab at least for the admnistrators if not for all? Thanks
- Ad

Thanks for your input but DRM does seem to be behaving what you said or may be I am still missing something here.
I created a standard query.
I have a standard export.
Now, in the verification/filter tab of my Standard export, I am able to see my standard queries.
But,
I am unable to see the Non-Standard Queries.
HOWEVER,
If I have a Non-Standard export --> I am able to ALL the queries. This makes it a lot more flexible in doing things.
My question is the WHY are my standard exports not able to reach the non-standard queries. What I wanted to do a twist in my export for analysis purposes for a particular use. If non-standard exports have access to Standard and Non-Standard queries --> it just makes more sense to always use a non-standard export and create non-standard queries.

LiveCycle and AD three questions.

I have three Javascript questions.
1)     How would I go about finding the current domains which user is authenticated to. What I need to do is have a form that can only be used while in certain domain.
2)     Would also like a way of populating a forms value based on the current logged in user of the system (active directory.)
3)      Am also looking from information on how I could use an existing AD account to sign a form, basically creating a maintaining a digital signature for user that is password synced to their existing AD account. Allowing them to ‘sign’ the form by entering their AD credentials. Realizing this is a complex subject I have been searching Adobe Tech support for a place to start and as yet being unsuccessful.
Thanks!

I can get the process forms, but not following steps 3-4. Please
elaborate
$Nith$ <[email protected]>
09/18/2009 17:29
Please respond to
[email protected]
To
Thomas Beaty <[email protected]>
cc
Subject
LiveCycle and AD three questions.
i have one solution for your second question.
1. Drag the process fields(from custom library) to the form
2. A field named AWS_ASSIGNED_ID will be in invisible mode.
3. The field will hold the currently loged in users's AD id (the column
name is refprincipalid) in the Adobe table
4. use this table to get all details of a user from edcPrincipal table.
If unclear, i'm ready to make it elaborate for you.
Nith

Primary and Standby CM question

In general, Primary and Standby CM's database tables, configurations, group polices should be sync'd up and looked identical, right? What else will be different and will require to import onto standby CM manually? Things like: SSL certificate, Secure store encryption...etcs.
Thanks!
Joe

Hello Joe,
I don't think you're leaving anything behind in regards how primary and standby CM sync works, just follow the steps from the configuration guide and everything will be taken care,if there was any doubt just let us know what WAAS software version your running and the specific question. Critical files like Secure-store and SSL certificates will be automatically sync as well.
Still, in my experience I stronly suggest to make sure your devices time settings are right.
Time settings is very important for the sync to work fine, best way is to use an NTP.
Please find the attached link to configure NTP and timezone:
Configuration Guide:
================
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v417/configuration/guide/other.html#wp1042418
Command Reference:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v417/command/reference/glob_cfg.html#wp1496245
Good Luck!

General naming and userid standards question

Similar Messages

Maybe you are looking for