General Precalculation Tab - Variable Assignment

Hi Experts!!!
We have a new problem, we are setting Precalculation Web Application, the Data Provider query have a Variable, when we are setting this in the General Precalculation Tab a error ocurr "String of variables VAR_01 not filled"  Number warning RSRD 267.
Maybe us don't know how to do this, you can help me.
Regards
Egly

I meant you must have data in your respective warehouse system on which you are trying to precalculate then only OLAP processor will fetch data for precalculation.
Please check it out

Similar Messages

  • Variable Assignment in General Precalculation tab of BI 7.0 broadcaster

    Hi,
      In the broadcast setting, under General precalculation tab variable values can be set up. When we are clicking create variable values, screen with all the variables of the query were coming.
    After entering data in the variables and clicking OK, values are not being transferred to the Broadcast setting. The variable page remains like that with out transferring to the Pre Calculation tab.
    We are on SAPKW70020.Distribution type used is Broadcast email, output fornat is MHTML. I tried with other output types, but same result.
    We are using query as the object type for creating Bex Broadcaster.
    Has anyone ran into this issue before?
    Thanks & Regards,
    Pradeep

    Hi Mohan,
    You have opened up an old post, so many responses might be to answer the initial question.
    However, to answer your question, when you click 'Create' next to the 'VAR01 in Variable assignment, what you see is a popup window with the 'Ready for Input' variable present in your query/ workbook/ template, which is the same variable screen which you get when you execute the same query/ workbook/ template independently. You can then enter values for those variables and click OK, to save it and to be passed to the broadcasting setting. The broadcast would then happen for the same variable values.
    However, if you face the issue mentioned by Pradeep, then after clicking OK, you can cancel the popup window. The values of the variables would still be passed.
    After the popup window closes, you can see the 'Create', you initially saw, replaced with 'Change'. This means the values are saved.
    Hope it helps.
    Thanks,
    Abhishek.

  • Dynamic variable assignment under general precalc tab of broadcasting

    Is there a way to dynamically assign variable values to the "general precalculation" tab under broadcasting? I am broadcasting a report and I want to change the variable values every month dynamically. I want to write an ABAP program that can fill the variant valus under that general precalculation tab. Is this possible?

    There is a table RSRD_SETT_NODE_a that contains all the broadcast settings. It has the variable values. We wrote an ABAP program to update this value. We can save a variant of this program and run the variant before we run the broadcast. The broadcast setting, variable name we want to update, and the class to pass values to this variable are input parameters to the program. Let me know if you want more details.

  • Issue with the variable assignment in th Bex broadcaster

    hi ,
    i am working on Bex broadcaster . while creating a setting for a report, in the variable assignment under the General precalculation tab, the value given is not getting transferred.
    i tried it in development portal its working fine.
    do anyone have any ideas abt this.

    Hi Apurva,
    Find any solution for your problem? We are experiencing a similar issue too.
    Thanks,
    Vivek

  • Broadcasting and Variable Assignment

    Dear Experts,
      I want to assign variable in broadcasting dynamically. For example, this variable will be changed every month. I tried to set the variant on BEx Analyzer, and looked into the table TVARV, but I couldn't find my variant in that table. Is there any way to assign variable dynamically?

    Hi CSM Reddy,
    1. while creating your Broadcasting Settings ... you can use your Variable for OLAP Cache.
        Question1. How and where can I use variable for OLAP Cache in broadcasting. What I just see is variable assignment in the General Precalculation tab
        Question2. Variable for OLAP Cache you said is the same as the variable created in Query Designer, right?
    2. then you make sure the variable in Bex is setup with "Ready for input" unchecked
        Question1. I have to allow users to input month to see the report in the month they want, so I think I can't default the value for this variable.
        Question2. What do you mean 't Type variable'?

  • Variable assignment "Create" link opens up BEx Analyzer

    In a portal environment we're testing with, we are running into an unusual issue:
    In BEx Broadcaster, We open up a setting created for a particular query.  In the General Precalculation tab we are trying to create a variable assignment (Select VAR_01 from dropdown menu -->Create "link"), but when we click on the "Create" link, we're getting the BEx Analyzer instead of the variable screen for that query (doesn't work for any query, but for workbook settings, it works fine).  The following has been checked:
    ms/redirect_version is set to 1
    BI Support Desk tool is all GREEN
    Assertion ticket setup is correct (at least I think it is)
    I can also pull up Information Broadcasting directly from the backend system (sap/bw/Bex) and the variable screen comes up okay.
    Any ideas of some setting we're missing in the portal/backend?   Thanks for any help.
    (We're using NW SP 17 with BI-Java 17/23...BI Backend is NW SPS16)

    UPDATE:  fixed by updating support pack to BI JAva 18 (from 17/23).  The solution doesn't make much sense, but we've learned to just accept these sort of things in faith

  • Information broadcasting: unable to fill variant in precalculation  tab

    Hi all,
    I have been trying to broadcast a query in BEX BROADCASTER but when i try to fill in the variant in the general precalculation tab i am not able to create a new variant as it always takes me to web analyser screen and no option for saving the settings.
    What i did is created variants in web analyzer as well as bex analyser but still in vain.
    But the broadcasting is running if i go through analyser first then click on send and do the settings in the INFORMATION BROADCASTING tab.
    But still there is only limited option available der no bursting or pdf or XML generation is allowed.
    I need inputs on this because i need to broadcast it as XML format.
    Regards,
    Sarang

    Please note that not all the distribution types are available for all the objects.
    http://help.sap.com/saphelp_nw04/helpdata/en/c9/e4d13f7fb44c21e10000000a1550b0/frameset.htm
    For queries, you can send them either by mail or export to the enterprise portal. XML is not available for queries.
    Thanks.
    Shambhu

  • Broadcasting - General Precalculation Variable Assignment

    Hi All,
    Just have a query regarding Broadcast settings for a bex Query with variables.
    After creating the broadcast settings under the "General Precalculation"
    Variable Assignment
    > Determine from Variants options
    Can anyone tell me where do we have to create these variants so as to select them from the Broadcast settings window and map it to the query varaibles??
    Thanks
    Rao

    Hi Rao,
    You just need to execute ur query ( either in Bex Analyser or Web analyser ). In the selection screen you can enter the values for ur variable & save as a variant ( ex: VARIANT1 ).
    In broadcasting now click now variant tab there u can see the VARIANT1 which was created during query execution.
    Hope this helps.
    Regards,
    Sheetal

  • Variable Assignment-Workbook Precalculation

    Hai Guys,
    I have a problem while executing.please,go through it
    Start---BEx Analyzer--
    Create new work book.While executing the work book,it is asking me to enter variable values.Once the variables are given and when start executing it, i am getting the ouput correctly and when i  broadcast the same through email,in work precalculation tab, again it is asking me to enter variable values.I have done that and  executed.  But I am  not able to receive any email.Infact,after taking 3 mnts it showing Timed out error.Kindly,suggest me with a solution to this. Where should I exactly enter variables?
    Kindly,give me a solution for this.
    Thanks,
    Mohan Chand Reddy A

    Hai Shakir,
                    First i thank q for ur reply to my question.But is it correct that we should assign Variables only in the Workbook Precalculation tab?Some one are suggesting like variables can be given both in foreground calculation i.e., while creating a workbook and also we should give the same variables in the workbook  precalculation tab.But in one document, i found there is no variable assignment tab in the Broadcasting settings.It means they might have given variables in the workbook creation itself.
          Please,reply me.It's very urgent.
    Thanks,
    Mohan Chand Reddy A

  • Variable assignment screen in Precalculation server

    Hi Guru's,
    I am not able to get solution for this problem from long time. Can anybody tell me...
    How to setup variable assignment screen in Precalculation server?
    Currently when i click Create Variable assignment in precalculation tab of broadcaster... it gives error that error loading 0ANALYSIS_PATTERN template.
    Plz help. whole points will be assigned.
    Thanks
    Harshal

    I made a copy of 0ANALYSIS_PATTERN, and changed spro settings, wkbks are broadcasting but only problem is i am not able to assign variables, because no popup screen coming for creating variables. i also wrote program for table RSRVARIANT.

  • BEx Broadcaster and Variable popup on General precalculation setting

    Hy expert's , i have this serious problem: on bex broadcaster, when i use the Create link to configure a variable assignment of the broadcasting settings, a window popup appear and it don't contain variable screen but the Web Analyzer.
    Could you help me?
    Than'ks a lot.
    Sincerely yours
    Andrea Maraviglia

    Hi,
    Did anyone find a solution to this? I'm facing the same issue on production portal.
    Its disturing the broadcasting functionality.
    Appreciate if you can provide a solution.
    Regards,
    Seema Rane.

  • Variable Assignment : Workbook broadcast

    Hi gurus,
    We have been broadcasting 31 Inventory workbooks on a weekly basis for the past couple of months. The workbook is based on 1 inventory query which has a Cal Month and Store Location as mandatory variables. Obviously, while broadcasting the same, we should be able to set these variables in the Variable Assignment of the Workbook Precalculation Tab.
    Earlier I was able to see them in the variable assignment assignment for this workbook. We havn't changed the query, no changes in the system, No changes at all. But now I am not able to see a single variable in the variable assignment except for this variable that says Tech.Cont.: Time Frame for which Data is Selected.
    I am not sure where can I see the variants for this workbook. Anyways, we havn't mentioned any variants in the workbook precalculation tab. Please help me with this issue.
    I executed the query and tried broadcasting the corresponding query, Here I am able to see the variable assignment. But not for the corresponding workbook. Creating all the settings right from the scratch for changing from workbook broadcast to query result broadcast would be a very tedious task which I don't want to undertake right now.
    Can anyone please help me with this problem.
    Thanks & rgds,
    Sree

    Hi Murali,
    Thanks for your answer and sorry wasn't able to respond early.
    As I had mentioned, this problem didn't exist earlier. However, all of a sudden, we have started to face this issue. Global variants were never created because we are not using the option of VARIANTS, instead we use Variable Assignments. This has been the practice for the past many months, but all of sudden since last month, we started having this strange issue where we could'nt determine the variable assignment.
    When know I click on the variable assignment create link, there is only one variable that appears in the screen "Tech.Cont.: Time Frame for which Data is Selected", I donot see any other variables. Earlier though, i was able to see all the other variables (Plant, division, etc).
    Please let me know if you have any answer for this issue.
    Thnks & rgds,
    Sree

  • Unable to view the tabs to assign points?

    Hi,
    I am unable to view the tabs to assign points for the answers I have received.
    Please look into the matter...
    Title: Confusion Related to New G/L?
    Discussion Body:
    Hi,
    Management is thinking for implementing New G/L in my Company and we have to prepare the presentation for that. I am not sure of few points though I have searched already but unable to find out anything which clears my doubts which are as follows:
    1) Can we implement new G/L In-house or do we have to get it done from external sources or SAP only?
    2) Can we achieve IFRS and GAAP reporting through segment reporting in house or not. Does that require any other cost as we are already on ECC6.0 but new g/l is not activated?
    3) Is it mandatory to get the Data Migration done from SAP or can we do it In-house as well?
    4) If one knows the approx. cost if we get it done from external sources at each point on in total at all the above mentioned points?
    5) Is it so that partially we can do it and partially we need to take the help of the external sources?
    Please reply asap.
    Thanks in advance...
    Regards
    Nitin

    Some added toolbar and anti-virus add-ons are known to cause
    Firefox issues. '''Disable All of them.'''
    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Type '''about:preferences#advanced'''<Enter> in the address bar.
    Under '''Advanced,''' Select '''General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?

  • Bex Broadcaster can't click past OK in variable assignement

    Hi All,
    Form the portal Broadcast settings in general precalculation settings when I try to change variable values selection from that actual screen I can't click past ok after selecting the variable.
    we are BW 7.02 and on IE8
    from reading some posts on SDN i have already tried and I have turned of SmartScreen Filter off/ Phising filter off and also looked at note
    1498753 - Variable screen not closed in Bex Broadcaster, but this has not resolved our issue.
    has anyone else faced a similar issue
    Thanks
    Forhad

    Thank you for your suggestion. I want to make sure I understand you correctly so I have a few questions.
    Is this transparent table that you are using in your BW system or in your ECC system? Our BW and ECC systems are on different machines using different databases. Do you load the data from this table into your BW system for this to work? I think I understand that you are creating a way to create the missing master data so the BEX 7 query does not give the error message allowing the user to input their range of values.
    If I understand you correctly I would create my Z table in our ECC system with the fields you mentioned, create a DSO or something simple in our BW system and load the data each time a user wants to use a new range of values for the field so that the field's master data would exist.
    Am I understanding you correctly?
    I don't think this solution, if I am understanding it correctly, will work for us because I don't think I can just add new Vendor Numbers like you were able to do with a date field. The Vendor is tied to a lot of other things, master data, ...
    Thanks,
    Jeri
    Edited by: Jeri McNeany on May 17, 2011 4:55 PM
    Edited by: Jeri McNeany on May 17, 2011 8:16 PM

  • BEx Broadcaster  General Precalculation

    Hi
    In the BEx Broadcaster ,when i select "Online link to the current data", automatically the tab "General Precalculation" is disappearing.
    Here i want the result with input parameters of the current month.
    What to do in case if this problem exists?. Is that ,we cant give input parameters
    if we select "Online link to the current data" .???
    Pls suggest.
    Regards
    Deepak

    Hi,
    Did anyone find a solution to this? I'm facing the same issue on production portal.
    Its disturing the broadcasting functionality.
    Appreciate if you can provide a solution.
    Regards,
    Seema Rane.

Maybe you are looking for