General problems with Traffic info
I purchased a 1 year license for trafic info Benelux + on nokia maps
Each time traffic reports a congestion it interprets it as a problem in BOTH directions.
Yesterday I was advised to take another route because of a 11 Km traffic jam which was on the other side of the road.
Anyone experienced this as well?
Regards,
Hans Goris
I purchased a 1 year license for trafic info Benelux + on nokia maps
Each time traffic reports a congestion it interprets it as a problem in BOTH directions.
Yesterday I was advised to take another route because of a 11 Km traffic jam which was on the other side of the road.
Anyone experienced this as well?
Regards,
Hans Goris
Similar Messages
-
Problem with Creating Info Record
Hello Gurus,
I've problem with Creating Info Record
i tried to create info record for Plant Specific/Purchase Org
The first Screen General Data is OK
i entered all the data in the next screen ie
Purchase Organization Data screen but i'm getting error
<b>Make an entry in all required fields</b>
but there is Mandatory Textbox ie "VALID TO" which im unable to select Bcos its Disabled
pls help me regarding this
thanks in advanceHi
Have u given the net price. <b>VALID TO</b> is the date until which the price shown in the info record is valid.
If there is no price that is valid on the current date, the last-valid price is displayed and the date field contains the day before the start of the next validity period (this may be 12.31.9999 if there is no further validity date). If all validit periods lie beyond the current date, the price of the next period is displayed. The date field then contains the end date of this period.
These validity periods we will maintain Purchse data CONDITIONS while creating info record. Check the validity period for the conditions.
Hope this will helps u
Ravi
Ravikumar Bolla -
Was the general problem with the bluetooth headset solved in the new ios 5 or in the new iphone 4s
was the general problem with the bluetooth headset solved in the new ios 5 or in the new iphone 4s ?
thank you greatly
also i would like to know what are the diffrences with the bluetooth 4.0 vs 2.1
( the bluetooth headset i was thinking of is jawbone icon series thinker black )Hi,
I had HUGE issues with a BlueAnt Q2 on the 4, and after five exchanges, I had to get rid of the phone becuase the Apple store admited that they had "some bluetooth issues."
I still have the Q2, and I was wondering the same thing becuase I realy want an iphone. -
Problems with RWD Info Pak 5.5 and SAP 7.2
Hi, since the new SAP GUI was installed, I've been having problems with RWD Info Pak 5.5. I start to record Event step in SAP and when I stop and go back to the word document, Info Pak will not record any of the steps but might record pieces of snapshots.
Is anyone else having this problem or know if there is a fix?
Thanks!Similar problem here, after updating xorg and nvidia driver the system freezes with nvidia logo on display and caps lock and scroll lock leds blinking.
I got nvidia geforce 7300.
Any solution to this besides downgrading? -
HT204088 I have a problem with billing info.....
After the last purchase, it said that was a problem with billing the last purchase and need to verify my billing info, i put the password, trying to load and after few sec asks me again,i put again...the same....i tried at least 10 times and does that.....i check if my creditcard didnt have money and it has......i check the password it works (i tried a wrong pass and corrected me)......WHat is going on??? Please help....
I think iPhone is jus a bloody rip off I downloaded a app now I can't download another app I called customer service more then 10 times today they took away 15 pounds of my call time so I would recommend everyone not to use I phone they don't give much help but they love ripping poor customers like myself
-
What is the general problem with this OriginLab VI?
I'd like to use some VIs provided by OriginLab for their graphing and analysis software. They apparently haven't updated their VIs since Labview version 8.5 The attached screenshot is an example of the general problem I'm seeing in their VIs. If I hover over the property nodes, the Labview context help gives the error "This property is not valid for this class." It looks to me like these are Origin classes and Origin properties, so I'm surprised by that error.
Any idea about the reason for this problem? I'd like to explain it to them in a little more detail and try to motivate them to fix it. Still, I doubt it will happen soon. Any suggestions about whether it's something I could fix myself?
Thanks!The activeX interface might be inside a *.ocx, *.dll and even a *.exe file. So manually browsing and trying files with these endings might work. You could even try a text search with a hex editor to identify possible ActiveX components, you should find the keywords IDispatch and IUnknown in them.
The proper way would be when they show up in the list. This actually is derived from some registry keys (I think it was a bit cryptic to track in the registry, as it involved searching for CLSID or the like). Proper registration is done by command line regsrv32 (if memory serves right). Normally this is automatically called from the installer.
So it might be the best you just try to reinstall Origin.
Also search the Origin folder if there are some other examples included there (and if they work).
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml -
Problems with 'Get Info' in movies and TV Shows
Hey all,
Very Recently I have acquired a problem with my iTunes application and specifically the 'Get info' option in movies and TV Shows. For some reason I when I use apple + I or go to file then 'get info' the information box for the item in question does not appear.I have tried restarting iTunes and also restarting my machine but the problem still persists. any help would be appreciated, thanks.bump
-
Problems With Syncing Info To New Device
I have tried to sync info from my previous palm to my new palm. The sync is from the PC to the palm. The sync stalls when it gets to the calendar. It is just stuck there and I can't seem to get past it. Does anyone have any suggestions for me?
At the top of each section of the Forum are special posts that have a dark background. They are answers to questions that get asked repetitively - over and over and over again!
Yours is of this type. Please look at the top of the section for "problems with syncing contacts and calendar".
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
General Problems with iMac 9,1 's
There seems to be a disturbing trend as of the last two OS releases, Mavericks and Yosemite, and it involves a lot of iMac 9.1's. You see a lot of reports of sudden shutdowns, kernel panics, graphics issues, Safari crashes, Messages woes...and the list goes on. I have an early 2009 iMac 9,1 with 8GB RAM and an nVidia 130gt 512 Mb. With the release of Mavericks 10.9.4, I started getting the Sudden Shutdown Syndrome (machine powers down with no warning, like the power cord was pulled). After doing the required switching of power cables, using different RAM, switching of UPS's, opening the computer to clean it, etc..., I thought it might be a problem with either the power supply unit, the graphics card, or the logic board. Unfortunately, I'm overseas in a country that doesn't have an Apple Store so an easy repair option isn't available to me.
Pressing forward, I noticed that I didn't get any crashes or shutdowns in Safe Mode. Granted, only subset of the extensions are loaded, but if it was a flaky PSU or logic board, it would seem that it would show something at some point. And, the thing about graphics cards is that when they go bad, they start to leave artifacts and pixilate, and that wasn't happening in full boot or safe mode. I also noticed that in full boot mode, I could repeat certain actions that would cause a shutdown 100% of the time. I have also read reports where people had the logic board, graphics, and/or PSU changed out, the problem went away for a bit, then came back!
I'm now thinking that this is a software conflict that specifically affects iMac 9,1's and Macs of similar architectures. I'm fairly convinced of this because when I entered the Yosemite Public Beta Program (I was desperate to get a fix), I noticed that with each release, certain actions that would cause 100% failure/shutdown were gone, while others remained. When I installed Public Beta 5, and did a cache cleanup...MY SHUTDOWN PROBLEM WAS GONE! All the actions that used to crash the machine didn't work anymore. If it was a hardware problem, it would seem like the shutdown problem would still be present.
But, alas, mine is still a tale of woe. When I installed Public Beta 6, THE SHUTDOWNS RETURNED! When I looked at the release notes, it mentioned unspecified driver changes. Hmmmmmmm. Unfortunately, Public Beta 6 was the GM so when I downloaded the Yosemite Final Release, nothing changed...same old crashes.
So, what do I think is happening? I'd bet my bottom dollar that the problem lies in the interaction between the GeForceTesla driver, the kexts which control the power management of the graphics cards, and the system/user cache files. I think if Apple investigated those areas, a solution may be found. Also, I wish they would go back to Public Beta 5 and see why that release was so stable for iMac 9,1's (at least for mine anyway).
However, if anyone else has any insight to these problems, I'd love to hear it.
As a side note, Safari (along with my system) crashes frequently while Google Chrome Canary 64-bit is as solid as a rock. And, again, I experience no crashes in Safe Mode, even with using Safari.I have an iMac9.1 24" and had no issues in Mavericks and have no issues at all in Yosemite. So it seems to rule out hardware-problems.
-
General problem with (WD?) external HD after latest OS X update?
Seems like there are a lot of problems with (mostly Western Digital) external HD after the latest OS X 10.5.8 update?
http://discussions.apple.com/thread.jspa?threadID=2139995&tstart=0
http://discussions.apple.com/thread.jspa?threadID=2146819&tstart=0
http://discussions.apple.com/thread.jspa?threadID=2148663&tstart=0
http://discussions.apple.com/thread.jspa?threadID=2054236&tstart=0
lost connection to drive in finder
time machine issues
and so on...There were a lot of issues with WD drives long before the update.
-
General problems with iMac displays
Why is it about iMacs that has these pseudo "burn-in" issue with their displays?
Is this due to cheap component (LG panels)?
Or is this some scheme by Apple to make people pay?
Or both?
I am a proud mac (for that I have insulted enough PC and Linux sinners), but during the day I am forced to be a PC at work. But I have NEVER EVER seen any image persistence on any make/model of 3rd party LCD monitors before. My iMac is currently connected to a Samsung LCD monitor, and when my "dangle" a window (say Safari) between 2 monitors and leave both screens ON for 5 hours, my iMac monitor gets the "burn-in", but the Samsung doesn't.
Maybe 5 hours is a bit extreme, but I am starting to see faint "gridlines" showing up on my screen after I had my Excel open for more than 40 minutes.
What gives?You are not alone with regards to this issue with the screen.
http://discussions.apple.com/thread.jspa?threadID=1446926&start=0&tstart=0
http://discussions.apple.com/message.jspa?messageID=12248055#12248055
Apple does not seem to want to acknowledge that this is a problem and will probably tell you that the issues are "environmental" and do not see any problem with it.
I have a similar set up with a Samsung monitor connected and have not issue with the Samsung. -
General problems with iMovie '09
Hello,
I am a big fan of the programme iMovie, but have been encountering some serious problems with it recently. Any help would be much appreciated.
I originally had iMovie '08, which I was quite happy using, until one of the automatic updates left it unusable: when loading the programme, the spinning timer in the viewer screen would stay there indefinitely, and trying to play any clips in the viewer resulted in either a blank or a scrambled a screen.
I remedied this by reinstalling my entire iLife '08 and using the most basic version of iMovie - not acceoting any of the automatic upgrades - and it seemed to work fine.
However, I upgraded to the Leopard OS recently and had to upgrade iMovie accordingly so that Leopard would run. This left iMovie in a state where I could only import certain video files (mostly .mov, I believe).
So I went and bought iLife '09, thinking that any problems would be sorted out on the updated iMovie. They are not - I am still only able to import .mov files, so I bought myself a file converter and have spent the last week converting all the movie files I want to work with into .mov - a very long-winded process.
Now I'm finding that, although I can import these .mov files fine, once I drag them to the project editor, they stall and crash, and I can't edit them at all.
Does this sound like a simple problem to solve? I do love using iMovie, but these recent problems have meant that I have wasted a lot of time and money trying to sort something out that doesn't ever seem to work.
As I said, I would be extreme,ly grateful for any help, because this is causing me an enormous amount of frustration, lost time and wasted money.
Thank you!Hello,
Thank you very much for getting back to me. I have to confess a certain amount of ignorance to some of these types of things! I'll just quickly explain what my situation is now and if you can help me out I would be very grateful (and happy).
Basically, most of the files I want to import into iMovie are .avi. When I look at the Inspector, they are listed as either "DivX 5.0" or "Generic MPEG-4". I have a lot of files, so there may be some other formats, but when importing clips to iMovie, the icons for the "DivX 5.0" files appear faded and cannot be selected (wrong codec) and the icons for the "Generic MPEG-4" files appear dark and can be selected (compatible codec). However, if I try to import any of the "Generic MPEG-4" ones, the time bar that says "optimizing video" appears for less than a second, disappears and then the spinning timer icon appears for a second before disappearing, without the clip having been imported.
What I did therefore was to use a converter to convert my files into .mov. Now my problem is that when I import clips, they do import and appear in the Event Library, but when I transfer them across to the editor, and spool through the clip with my mouse cursor, the screen remains blank... in fact sometimes the screen disappears completely, leaving just a grey background. This seems to be my main problem now, since importing videos is now possible.
Do you have any suggestions for what is causing the clips to be uneditable?
Do you have any suggestion for how I can simply change the codec of my original clips so that they can be imported successfully?
Thank you again for your help. I hope I explained the problems I"m experiencing well enough to understand - I'm not very literate with the more technical aspects of file formats and so on.
Thanks!
Ed -
General problems with Nokia E72-1
Hey there,
I've got a couple of problems with my Nokia E72.
1 - GPS via Ovi Maps. I have to wait like 10-20 minutes even although I use aGPS to get a fix (to get the GPS signal)... And even tho I've got polish lector voice in the navigation installed it doesnt work. There are only two communicates working: "Now get off the roundabout" or "You will reach the destination". Why? I checked twice, I've got properly installed and choosen polish voice and polish maps.
2 - Random phone freeze. My phone freezes randomly. From time to time when I check the mobile, I notice its frozen. I can't perform any action, except getting battery out...
3 - Random message sounds getting disabled. It happened 5 minutes ago, it's the first time it happened. I get SMS, the screen is lighting and lighting all the time, until I read it. I checked the profile twice, I even setted the sound again, but it still doesn't work. I had to get battery out and reset the phone to make it work again.
Why are those problems? What should I do with it?
My soft - 052.005
Solved!
Go to Solution.1 - GPS: Other people have complained about this, too, and there may not be a simple answer. For me, I have been more careful where I hold my E73 (so as to not block the internal antenna) and the problem seems much less common.
1 - Polish Voice Navigation: Where are your map and voice files stored? Look in \cities\diskcache\voices for a "polish_f" directory and the contents should look like this
polish_f/:
3201 2011-02-12 20:09 common.lua
9198 2011-02-12 20:09 config.lua
12288 2011-02-12 20:09 polish_female
7581 2011-02-12 20:09 skin_polish_female.lua
polish_f/polish_female:
17026 2011-02-12 20:09 beep
35010 2011-02-12 20:09 g5ann_001
49560 2011-02-12 20:09 g5ann_004
56338 2011-02-12 20:09 g5ann_005
27352 2011-02-12 20:09 g5con_001
8236 2011-02-12 20:09 g5con_002
28696 2011-02-12 20:09 g5ext_000
27992 2011-02-12 20:09 g5ext_000e
41496 2011-02-12 20:09 g5ext_001
44226 2011-02-12 20:09 g5ext_001e
42712 2011-02-12 20:09 g5ext_002
42348 2011-02-12 20:09 g5ext_002e
44568 2011-02-12 20:09 g5ext_003
44716 2011-02-12 20:09 g5ext_003e
45228 2011-02-12 20:09 g5ext_004
45186 2011-02-12 20:09 g5ext_004e
42540 2011-02-12 20:09 g5ext_005
41880 2011-02-12 20:09 g5ext_005e
43224 2011-02-12 20:09 g5ext_006
41132 2011-02-12 20:09 g5ext_006e
42434 2011-02-12 20:09 g5ext_007
44396 2011-02-12 20:09 g5ext_007e
42882 2011-02-12 20:09 g5ext_008
42348 2011-02-12 20:09 g5ext_008e
47170 2011-02-12 20:09 g5ext_009
46616 2011-02-12 20:09 g5ext_009e
45250 2011-02-12 20:09 g5ext_010
47320 2011-02-12 20:09 g5ext_010e
51052 2011-02-12 20:09 g5ext_011
51928 2011-02-12 20:09 g5ext_011e
49538 2011-02-12 20:09 g5ext_012
48152 2011-02-12 20:09 g5ext_012e
30210 2011-02-12 20:09 g5man_001
32194 2011-02-12 20:09 g5man_001e
43736 2011-02-12 20:09 g5man_002
39852 2011-02-12 20:09 g5man_002e
18040 2011-02-12 20:09 g5man_004
20844 2011-02-12 20:09 g5man_004e
40610 2011-02-12 20:09 g5man_005
37016 2011-02-12 20:09 g5man_005e
35202 2011-02-12 20:09 g5man_006
37570 2011-02-12 20:09 g5man_006e
39628 2011-02-12 20:09 g5man_007
39926 2011-02-12 20:09 g5man_007e
45400 2011-02-12 20:09 g5man_008
43736 2011-02-12 20:09 g5man_008e
40172 2011-02-12 20:09 g5man_009
46078 2011-02-12 20:09 g5man_009e
30392 2011-02-12 20:10 g5mod_004
21698 2011-02-12 20:10 g5mod_005
15596 2011-02-12 20:10 g5mod_006
25790 2011-02-12 20:10 g5mod_017
15832 2011-02-12 20:10 g5num_001_after_f
14296 2011-02-12 20:10 g5num_001_after_m
8408 2011-02-12 20:10 g5num_002_after_m
7212 2011-02-12 20:10 g5num_002_follow_f
9154 2011-02-12 20:10 g5num_003_after
6360 2011-02-12 20:10 g5num_003_follow
13228 2011-02-12 20:10 g5num_004_after
12162 2011-02-12 20:10 g5num_004_follow
14402 2011-02-12 20:10 g5num_005_after
12184 2011-02-12 20:10 g5num_005_follow
19394 2011-02-12 20:10 g5num_006_after
14040 2011-02-12 20:10 g5num_006_follow
14508 2011-02-12 20:10 g5num_007_after
13704 2011-02-12 20:10 g5num_007_follow
12908 2011-02-12 20:10 g5num_008_after
10840 2011-02-12 20:10 g5num_008_follow
14892 2011-02-12 20:10 g5num_009_after
11352 2011-02-12 20:10 g5num_009_follow
14722 2011-02-12 20:10 g5num_010_after
12248 2011-02-12 20:10 g5num_010_follow
21208 2011-02-12 20:10 g5num_050_after
13592 2011-02-12 20:10 g5num_100_after
30392 2011-02-12 20:10 g5num_150_after
13528 2011-02-12 20:10 g5num_200_after
33260 2011-02-12 20:10 g5num_250_after
13080 2011-02-12 20:10 g5num_300_after
17218 2011-02-12 20:10 g5num_400_after
18434 2011-02-12 20:10 g5num_500_after
19874 2011-02-12 20:10 g5num_600_after
18210 2011-02-12 20:10 g5num_700_after
16664 2011-02-12 20:10 g5num_800_after
27224 2011-02-12 20:10 g5num_900_after
9048 2011-02-12 20:10 g5pre_002
3800 2011-02-12 20:10 g5pre_003
52606 2011-02-12 20:10 g5serv_001
35800 2011-02-12 20:10 g5serv_004
34584 2011-02-12 20:10 g5serv_004e
41282 2011-02-12 20:10 g5tul_001
40152 2011-02-12 20:10 g5tul_001e
40536 2011-02-12 20:10 g5tul_002
39618 2011-02-12 20:10 g5tul_002e
27416 2011-02-12 20:10 g5tul_003
29356 2011-02-12 20:10 g5tul_003e
39810 2011-02-12 20:10 g5tul_004
38616 2011-02-12 20:10 g5tul_004e
39468 2011-02-12 20:10 g5tur_001
41666 2011-02-12 20:10 g5tur_001e
41176 2011-02-12 20:10 g5tur_002
39234 2011-02-12 20:10 g5tur_002e
29634 2011-02-12 20:10 g5tur_003
27352 2011-02-12 20:10 g5tur_003e
41858 2011-02-12 20:10 g5tur_004
42840 2011-02-12 20:10 g5tur_004e
18540 2011-02-12 20:10 g5unt_km_plu_after
20012 2011-02-12 20:10 g5unt_km_plu_follow2_e
21016 2011-02-12 20:10 g5unt_km_plu_follow5_e
16504 2011-02-12 20:10 g5unt_km_sng_after
17602 2011-02-12 20:10 g5unt_m_plu_after
15384 2011-02-12 20:10 g5unt_mil_plu_after
11116 2011-02-12 20:10 g5unt_mil_plu_follow2_e
10712 2011-02-12 20:10 g5unt_mil_plu_follow5_e
13516 2011-02-12 20:10 g5unt_mil_sng_after
15874 2011-02-12 20:10 g5unt_yd_plu_after
66454 2011-02-12 20:10 g5war_005ne
47950 2011-02-12 20:10 g5war_009e
75966 2011-02-12 20:10 g5war_010e
47950 2011-02-12 20:10 g5war_012e
91138 2011-02-12 20:10 g5war_017e
66384 2011-02-12 20:10 g5war_018e
54112 2011-02-12 20:10 g5war_037e
32128 2011-02-12 20:10 pilot
If you are missing files, try deleting the entire contents of "voices" and downloading the navigation files again. Even if all files appear present, you might try this anyway. (Note: I don't think there is another way to refresh the voice files, but I haven't actually tried this myself.)
2. This is a hard question to answer, as a freeze could be caused by anything. But what is your phone doing when not in active use? Downloading email? Downloading podcasts? Do you keep an IM or a Facebook program running? My first guess is that one of these programs is causing the crash. Try shutting things off, or factory reset the phone and install/setup each of these programs, one at a time, and install the next one only after a day or two has passed with no crashes.
3. Other people have complained about this, too. I don't currently have this problem, but please see this thread: /t5/Eseries-and-Communicators/E72-No-tone-vibration-upon-receiving-SMS/td-p/660837/highlight/true .
I hope that helps! -
WRT54G General problems with this model
Has anyone else seem to find that WRT5G4 Routers always seem to be having problems? Im having a problem ( I think I fixed it though thanks you to guys) My friend always has a problem with it not dialing though his PPP0e. And both my neighbours have a problem with it droping the signal. Or maybe I have had bad luck with them.
i have had problems with this one too. it keeps dropping my signal. i have v.8 i was told to upgrade my firmware but it is a .bin file and i am not sure how to access the file. anyone have any ideas?
-
Problem with traffic over Remote Access VPN (Cisco ASA5505)
Hi
I've changed the VPN IP pool on a previously functioning VPN setup on a Cisco ASA5505, I've updated IP addresses everywhere it seemed appropriate, but now the VPN is no longer working. I am testing with a Cisco IPSec client, but the same happens with the AnyConnect client. Clients connect, but cannot access resources on the LAN. Split tunneling also doesn't work, internet is not accessible once VPN is connected.
I found a NAT exempt rule to not be correctly specified, but after fixing this, the problem still persists.
: Saved:ASA Version 8.2(1) !hostname ciscoasadomain-name our-domain.comenable password xxxxxxxx encryptedpasswd xxxxxxxx encryptednamesname 172.17.1.0 remote-vpn!interface Vlan1 nameif inside security-level 100 ip address 10.1.1.2 255.0.0.0 !interface Vlan2 nameif outside security-level 0 pppoe client vpdn group adslrealm ip address pppoe setroute !interface Ethernet0/0 switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!ftp mode passiveclock timezone SAST 2dns domain-lookup insidedns domain-lookup outsidedns server-group DefaultDNS name-server 10.1.1.138 name-server 10.1.1.54 domain-name our-domain.comsame-security-traffic permit inter-interfacesame-security-traffic permit intra-interfaceobject-group network utobject-group protocol TCPUDP protocol-object udp protocol-object tcpaccess-list no_nat extended permit ip 10.0.0.0 255.0.0.0 remote-vpn 255.255.255.0 access-list split-tunnel standard permit 10.0.0.0 255.0.0.0 access-list outside_access_in extended permit tcp any interface outside eq https access-list outside_access_in extended permit tcp any interface outside eq 5061 access-list outside_access_in extended permit tcp any interface outside eq 51413 access-list outside_access_in extended permit udp any interface outside eq 51413 access-list outside_access_in extended permit tcp any interface outside eq 2121 access-list outside_access_in extended permit udp any interface outside eq 2121 access-list inside_access_out extended deny ip any 64.34.106.0 255.255.255.0 access-list inside_access_out extended deny ip any 69.25.20.0 255.255.255.0 access-list inside_access_out extended deny ip any 69.25.21.0 255.255.255.0 access-list inside_access_out extended deny ip any 72.5.76.0 255.255.255.0 access-list inside_access_out extended deny ip any 72.5.77.0 255.255.255.0 access-list inside_access_out extended deny ip any 216.52.0.0 255.255.0.0 access-list inside_access_out extended deny ip any 74.201.0.0 255.255.0.0 access-list inside_access_out extended deny ip any 64.94.0.0 255.255.0.0 access-list inside_access_out extended deny ip any 69.25.0.0 255.255.0.0 access-list inside_access_out extended deny tcp any any eq 12975 access-list inside_access_out extended deny tcp any any eq 32976 access-list inside_access_out extended deny tcp any any eq 17771 access-list inside_access_out extended deny udp any any eq 17771 access-list inside_access_out extended permit ip any any pager lines 24logging enablelogging asdm informationalmtu inside 1500mtu outside 1500ip local pool VPNPool 172.17.1.1-172.17.1.254icmp unreachable rate-limit 1 burst-size 1no asdm history enablearp timeout 14400global (outside) 1 interfacenat (inside) 0 access-list no_natnat (inside) 1 10.0.0.0 255.0.0.0static (inside,outside) tcp interface 5061 10.1.1.157 5061 netmask 255.255.255.255 static (inside,outside) tcp interface https 10.1.1.157 4443 netmask 255.255.255.255 static (inside,outside) tcp interface 51413 10.1.1.25 51413 netmask 255.255.255.255 static (inside,outside) udp interface 51413 10.1.1.25 51413 netmask 255.255.255.255 static (inside,outside) tcp interface 2121 10.1.1.25 2121 netmask 255.255.255.255 static (inside,outside) udp interface 2121 10.1.1.25 2121 netmask 255.255.255.255 access-group outside_access_in in interface outsidetimeout xlate 3:00:00timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolutetimeout tcp-proxy-reassembly 0:01:00dynamic-access-policy-record DfltAccessPolicyaaa-server AD protocol ldapaaa-server AD (inside) host 10.1.1.138 ldap-base-dn dc=our-domain,dc=com ldap-scope subtree ldap-naming-attribute sAMAccountName ldap-login-password * ldap-login-dn cn=ciscoasa,cn=Users,dc=ourdomain,dc=com server-type auto-detectaaa authentication ssh console AD LOCALaaa authentication telnet console LOCAL http server enable 4343http 0.0.0.0 0.0.0.0 outsidehttp 10.0.0.0 255.0.0.0 insidehttp remote-vpn 255.255.255.0 insidesnmp-server host inside 10.1.1.190 community oursnmpsnmp-server host inside 10.1.1.44 community oursnmpno snmp-server locationno snmp-server contactsnmp-server community *****snmp-server enable traps snmp authentication linkup linkdown coldstartcrypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set FirstSet esp-3des esp-md5-hmac crypto ipsec security-association lifetime seconds 28800crypto ipsec security-association lifetime kilobytes 4608000crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5crypto dynamic-map dyn1 1 set transform-set FirstSetcrypto dynamic-map dyn1 1 set reverse-routecrypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAPcrypto map mymap 1 ipsec-isakmp dynamic dyn1crypto map mymap interface outsidecrypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=ciscoasa crl configurecrypto ca trustpoint CA1 revocation-check crl none enrollment retry period 5 enrollment terminal fqdn ciscoasa.our-domain.com subject-name CN=ciscoasa.our-domain.com, OU=Department, O=Company, C=US, St=New York, L=New York keypair ciscoasa.key crl configurecrypto ca certificate chain ASDM_TrustPoint0 certificate xxxxxxx ... quitcrypto ca certificate chain CA1 certificate xxxxxxxxxxxxxx ... quit certificate ca xxxxxxxxxxxxx ... quitcrypto isakmp enable outsidecrypto isakmp policy 1 authentication rsa-sig encryption 3des hash md5 group 2 lifetime 86400crypto isakmp policy 5 authentication pre-share encryption 3des hash sha group 2 lifetime 86400crypto isakmp policy 10 authentication pre-share encryption des hash sha group 2 lifetime 86400ssh 10.0.0.0 255.0.0.0 insidessh timeout 5console timeout 0vpdn group adslrealm request dialout pppoevpdn group adslrealm localname username6@adslrealmvpdn group adslrealm ppp authentication papvpdn username username6@adslrealm password ********* store-localvpdn username username@adsl-u password ********* store-localvpdn username username2@adslrealm password ********* dhcpd auto_config outside!threat-detection basic-threatthreat-detection scanning-threatthreat-detection statistics access-listno threat-detection statistics tcp-interceptntp server x.x.x.x source outsidessl trust-point ASDM_TrustPoint0 outsidewebvpn port 4343 enable outside svc image disk0:/anyconnect-win-2.5.2014-k9.pkg 1 svc image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2 svc image disk0:/anyconnect-linux-2.5.2014-k9.pkg 3 svc enablegroup-policy defaultgroup internalgroup-policy defaultgroup attributes dns-server value 10.1.1.138 10.1.1.54 split-tunnel-policy tunnelspecified split-tunnel-network-list value split-tunnel default-domain value our-domain.comgroup-policy DfltGrpPolicy attributes dns-server value 10.1.1.138 10.1.1.54 vpn-tunnel-protocol IPSec l2tp-ipsec svc split-tunnel-policy tunnelspecified split-tunnel-network-list value split-tunnel address-pools value VPNPool webvpn svc ask none default svcusername person1 password xxxxxxx encryptedusername admin password xxxxxxxx encrypted privilege 15username person2 password xxxxxxxxx encryptedusername person3 password xxxxxxxxxx encryptedtunnel-group DefaultRAGroup general-attributes address-pool VPNPool default-group-policy defaultgrouptunnel-group DefaultRAGroup ipsec-attributes trust-point CA1tunnel-group OurCompany type remote-accesstunnel-group OurCompany general-attributes address-pool VPNPooltunnel-group OurCompany webvpn-attributes group-alias OurCompany enable group-url https://x.x.x.x/OurCompany enabletunnel-group OurIPSEC type remote-accesstunnel-group OurIPSEC general-attributes address-pool VPNPool default-group-policy defaultgrouptunnel-group OurIPSEC ipsec-attributes pre-shared-key * trust-point CA1!class-map inspection_default match default-inspection-traffic!!policy-map type inspect dns preset_dns_map parameters message-length maximum 512policy-map type inspect sip sip-map parameters max-forwards-validation action drop log state-checking action drop log rtp-conformance policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect netbios inspect tftp inspect icmp inspect pptp inspect sip sip-map ! service-policy global_policy globalprompt hostname context Cryptochecksum:xxxxxxxxxxxxxxxxx: end
I've checked all the debug logs I could think of and tried various troubleshooting steps. Any ideas?
Regards
LionelHi
The bulk of the devices are not even routing through the ASA, internal devices such as IP phones, printers, etc. There is also large wastage of IP addresses which needs to be sorted out at some stage.
Outside IP address is 196.215.40.160. The DSL modem is configured as an LLC bridge.
Here are the debug logs when connecting if this helps at all. Nothing is logged when a connection is attempted though.
Regards
Lionel
Oct 15 17:08:51 [IKEv1]: IP = 197.79.9.227, IKE_DECODE RECEIVED Message (msgid=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 765Oct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing SA payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing ke payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing ISA_KE payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing nonce payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing ID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, Received Fragmentation VIDOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, IKE Peer included IKE fragmentation capability flags: Main Mode: True Aggressive Mode: FalseOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, Received NAT-Traversal RFC VIDOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, Received NAT-Traversal ver 03 VIDOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, Received NAT-Traversal ver 02 VIDOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, Received xauth V6 VIDOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, Received Cisco Unity client VIDOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, processing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: IP = 197.79.9.227, Received DPD VIDOct 15 17:08:51 [IKEv1]: IP = 197.79.9.227, Connection landed on tunnel_group OurIPSECOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, processing IKE SA payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, IKE SA Proposal # 1, Transform # 5 acceptable Matches global IKE entry # 2Oct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing ISAKMP SA payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing ke payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing nonce payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, Generating keys for Responder...Oct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing ID payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing hash payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, Computing hash for ISAKMPOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing Cisco Unity VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing xauth V6 VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing dpd vid payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing NAT-Traversal VID ver 02 payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing NAT-Discovery payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, computing NAT Discovery hashOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing NAT-Discovery payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, computing NAT Discovery hashOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing Fragmentation VID + extended capabilities payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing VID payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, Send Altiga/Cisco VPN3000/Cisco ASA GW VIDOct 15 17:08:51 [IKEv1]: IP = 197.79.9.227, IKE_DECODE SENDING Message (msgid=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + HASH (8) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NAT-D (130) + NAT-D (130) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 436Oct 15 17:08:51 [IKEv1]: IP = 197.79.9.227, IKE_DECODE RECEIVED Message (msgid=0) with payloads : HDR + HASH (8) + NAT-D (130) + NAT-D (130) + NOTIFY (11) + NONE (0) total length : 128Oct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, processing hash payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, Computing hash for ISAKMPOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, processing NAT-Discovery payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, computing NAT Discovery hashOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, processing NAT-Discovery payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, computing NAT Discovery hashOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, processing notify payloadOct 15 17:08:51 [IKEv1]: Group = OurIPSEC, IP = 197.79.9.227, Automatic NAT Detection Status: Remote end IS behind a NAT device This end IS behind a NAT deviceOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing blank hash payloadOct 15 17:08:51 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, constructing qm hash payloadOct 15 17:08:51 [IKEv1]: IP = 197.79.9.227, IKE_DECODE SENDING Message (msgid=b8b02705) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 72Oct 15 17:09:02 [IKEv1]: IP = 197.79.9.227, IKE_DECODE RECEIVED Message (msgid=b8b02705) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 88Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, process_attr(): Enter!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, IP = 197.79.9.227, Processing MODE_CFG Reply attributes.Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKEGetUserAttributes: primary DNS = 10.1.1.138Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKEGetUserAttributes: secondary DNS = 10.1.1.54Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKEGetUserAttributes: primary WINS = clearedOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKEGetUserAttributes: secondary WINS = clearedOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKEGetUserAttributes: split tunneling list = split-tunnelOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKEGetUserAttributes: default domain = our-domain.comOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKEGetUserAttributes: IP Compression = disabledOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKEGetUserAttributes: Split Tunneling Policy = Split NetworkOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKEGetUserAttributes: Browser Proxy Setting = no-modifyOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKEGetUserAttributes: Browser Proxy Bypass Local = disableOct 15 17:09:02 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, User (person2) authenticated.Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, constructing blank hash payloadOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, constructing qm hash payloadOct 15 17:09:02 [IKEv1]: IP = 197.79.9.227, IKE_DECODE SENDING Message (msgid=a2171c19) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 64Oct 15 17:09:02 [IKEv1]: IP = 197.79.9.227, IKE_DECODE RECEIVED Message (msgid=a2171c19) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 64Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, process_attr(): Enter!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Processing cfg ACK attributesOct 15 17:09:02 [IKEv1]: IP = 197.79.9.227, IKE_DECODE RECEIVED Message (msgid=3257625f) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 164Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, process_attr(): Enter!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Processing cfg Request attributesOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for IPV4 address!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for IPV4 net mask!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for DNS server address!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for WINS server address!Oct 15 17:09:02 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Received unsupported transaction mode attribute: 5Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for Application Version!Oct 15 17:09:02 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Client Type: iPhone OS Client Application Version: 7.0.2Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for Banner!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for Default Domain Name!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for Split DNS!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for Split Tunnel List!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for Local LAN Include!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for PFS setting!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for Save PW setting!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for FWTYPE!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for backup ip-sec peer list!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, MODE_CFG: Received request for Client Browser Proxy Setting!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Obtained IP addr (172.17.1.1) prior to initiating Mode Cfg (XAuth enabled)Oct 15 17:09:02 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Assigned private IP address 172.17.1.1 to remote userOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, constructing blank hash payloadOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, construct_cfg_set: default domain = our-domain.comOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Send Client Browser Proxy Attributes!Oct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Browser Proxy set to No-Modify. Browser Proxy data will NOT be included in the mode-cfg replyOct 15 17:09:02 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, constructing qm hash payloadOct 15 17:09:02 [IKEv1]: IP = 197.79.9.227, IKE_DECODE SENDING Message (msgid=3257625f) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 210Oct 15 17:09:03 [IKEv1 DECODE]: IP = 197.79.9.227, IKE Responder starting QM: msg id = c9359d2eOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Delay Quick Mode processing, Cert/Trans Exch/RM DSID in progressOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Resume Quick Mode processing, Cert/Trans Exch/RM DSID completedOct 15 17:09:03 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, PHASE 1 COMPLETEDOct 15 17:09:03 [IKEv1]: IP = 197.79.9.227, Keep-alive type for this connection: DPDOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Starting P1 rekey timer: 3420 seconds.Oct 15 17:09:03 [IKEv1]: IP = 197.79.9.227, IKE_DECODE RECEIVED Message (msgid=c9359d2e) with payloads : HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) + NONE (0) total length : 284Oct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, processing hash payloadOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, processing SA payloadOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, processing nonce payloadOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, processing ID payloadOct 15 17:09:03 [IKEv1 DECODE]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, ID_IPV4_ADDR ID received172.17.1.1Oct 15 17:09:03 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Received remote Proxy Host data in ID Payload: Address 172.17.1.1, Protocol 0, Port 0Oct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, processing ID payloadOct 15 17:09:03 [IKEv1 DECODE]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, ID_IPV4_ADDR_SUBNET ID received--10.0.0.0--255.0.0.0Oct 15 17:09:03 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Received local IP Proxy Subnet data in ID Payload: Address 10.0.0.0, Mask 255.0.0.0, Protocol 0, Port 0Oct 15 17:09:03 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, QM IsRekeyed old sa not found by addrOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Selecting only UDP-Encapsulated-Tunnel and UDP-Encapsulated-Transport modes defined by NAT-TraversalOct 15 17:09:03 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKE Remote Peer configured for crypto map: dyn1Oct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, processing IPSec SA payloadOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IPSec SA Proposal # 1, Transform # 6 acceptable Matches global IPSec SA entry # 1Oct 15 17:09:03 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKE: requesting SPI!IPSEC: New embryonic SA created @ 0xCB809F40, SCB: 0xC9613DB0, Direction: inbound SPI : 0x96A6C295 Session ID: 0x0001D000 VPIF num : 0x00000002 Tunnel type: ra Protocol : esp Lifetime : 240 secondsOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKE got SPI from key engine: SPI = 0x96a6c295Oct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, oakley constucting quick modeOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, constructing blank hash payloadOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, constructing IPSec SA payloadOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, constructing IPSec nonce payloadOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, constructing proxy IDOct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Transmitting Proxy Id: Remote host: 172.17.1.1 Protocol 0 Port 0 Local subnet: 10.0.0.0 mask 255.0.0.0 Protocol 0 Port 0Oct 15 17:09:03 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, constructing qm hash payloadOct 15 17:09:03 [IKEv1 DECODE]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKE Responder sending 2nd QM pkt: msg id = c9359d2eOct 15 17:09:03 [IKEv1]: IP = 197.79.9.227, IKE_DECODE SENDING Message (msgid=c9359d2e) with payloads : HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) + NONE (0) total length : 152Oct 15 17:09:06 [IKEv1]: IP = 197.79.9.227, IKE_DECODE RECEIVED Message (msgid=c9359d2e) with payloads : HDR + HASH (8) + NONE (0) total length : 52Oct 15 17:09:06 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, processing hash payloadOct 15 17:09:06 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, loading all IPSEC SAsOct 15 17:09:06 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Generating Quick Mode Key!Oct 15 17:09:06 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, NP encrypt rule look up for crypto map dyn1 1 matching ACL Unknown: returned cs_id=c9f22e78; rule=00000000Oct 15 17:09:06 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Generating Quick Mode Key!Oct 15 17:09:06 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, NP encrypt rule look up for crypto map dyn1 1 matching ACL Unknown: returned cs_id=c9f22e78; rule=00000000Oct 15 17:09:06 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Security negotiation complete for User (person2) Responder, Inbound SPI = 0x96a6c295, Outbound SPI = 0x09e97594IPSEC: New embryonic SA created @ 0xCB8F7418, SCB: 0xC9F6DD30, Direction: outbound SPI : 0x09E97594 Session ID: 0x0001D000 VPIF num : 0x00000002 Tunnel type: ra Protocol : esp Lifetime : 240 secondsIPSEC: Completed host OBSA update, SPI 0x09E97594IPSEC: Creating outbound VPN context, SPI 0x09E97594 Flags: 0x00000025 SA : 0xCB8F7418 SPI : 0x09E97594 MTU : 1492 bytes VCID : 0x00000000 Peer : 0x00000000 SCB : 0x99890723 Channel: 0xC6691360IPSEC: Completed outbound VPN context, SPI 0x09E97594 VPN handle: 0x001E7FCCIPSEC: New outbound encrypt rule, SPI 0x09E97594 Src addr: 10.0.0.0 Src mask: 255.0.0.0 Dst addr: 172.17.1.1 Dst mask: 255.255.255.255 Src ports Upper: 0 Lower: 0 Op : ignore Dst ports Upper: 0 Lower: 0 Op : ignore Protocol: 0 Use protocol: false SPI: 0x00000000 Use SPI: falseIPSEC: Completed outbound encrypt rule, SPI 0x09E97594 Rule ID: 0xCB5483E8IPSEC: New outbound permit rule, SPI 0x09E97594 Src addr: 196.215.40.160 Src mask: 255.255.255.255 Dst addr: 197.79.9.227 Dst mask: 255.255.255.255 Src ports Upper: 4500 Lower: 4500 Op : equal Dst ports Upper: 41593 Lower: 41593 Op : equal Protocol: 17 Use protocol: true SPI: 0x00000000 Use SPI: falseIPSEC: Completed outbound permit rule, SPI 0x09E97594 Rule ID: 0xC9242228Oct 15 17:09:06 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, IKE got a KEY_ADD msg for SA: SPI = 0x09e97594IPSEC: Completed host IBSA update, SPI 0x96A6C295IPSEC: Creating inbound VPN context, SPI 0x96A6C295 Flags: 0x00000026 SA : 0xCB809F40 SPI : 0x96A6C295 MTU : 0 bytes VCID : 0x00000000 Peer : 0x001E7FCC SCB : 0x985C5DA5 Channel: 0xC6691360IPSEC: Completed inbound VPN context, SPI 0x96A6C295 VPN handle: 0x0020190CIPSEC: Updating outbound VPN context 0x001E7FCC, SPI 0x09E97594 Flags: 0x00000025 SA : 0xCB8F7418 SPI : 0x09E97594 MTU : 1492 bytes VCID : 0x00000000 Peer : 0x0020190C SCB : 0x99890723 Channel: 0xC6691360IPSEC: Completed outbound VPN context, SPI 0x09E97594 VPN handle: 0x001E7FCCIPSEC: Completed outbound inner rule, SPI 0x09E97594 Rule ID: 0xCB5483E8IPSEC: Completed outbound outer SPD rule, SPI 0x09E97594 Rule ID: 0xC9242228IPSEC: New inbound tunnel flow rule, SPI 0x96A6C295 Src addr: 172.17.1.1 Src mask: 255.255.255.255 Dst addr: 10.0.0.0 Dst mask: 255.0.0.0 Src ports Upper: 0 Lower: 0 Op : ignore Dst ports Upper: 0 Lower: 0 Op : ignore Protocol: 0 Use protocol: false SPI: 0x00000000 Use SPI: falseIPSEC: Completed inbound tunnel flow rule, SPI 0x96A6C295 Rule ID: 0xCB7CFCC8IPSEC: New inbound decrypt rule, SPI 0x96A6C295 Src addr: 197.79.9.227 Src mask: 255.255.255.255 Dst addr: 196.215.40.160 Dst mask: 255.255.255.255 Src ports Upper: 41593 Lower: 41593 Op : equal Dst ports Upper: 4500 Lower: 4500 Op : equal Protocol: 17 Use protocol: true SPI: 0x00000000 Use SPI: falseIPSEC: Completed inbound decrypt rule, SPI 0x96A6C295 Rule ID: 0xCB9BF828IPSEC: New inbound permit rule, SPI 0x96A6C295 Src addr: 197.79.9.227 Src mask: 255.255.255.255 Dst addr: 196.215.40.160 Dst mask: 255.255.255.255 Src ports Upper: 41593 Lower: 41593 Op : equal Dst ports Upper: 4500 Lower: 4500 Op : equal Protocol: 17 Use protocol: true SPI: 0x00000000 Use SPI: falseIPSEC: Completed inbound permit rule, SPI 0x96A6C295 Rule ID: 0xCBA7C740Oct 15 17:09:06 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Pitcher: received KEY_UPDATE, spi 0x96a6c295Oct 15 17:09:06 [IKEv1 DEBUG]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Starting P2 rekey timer: 3417 seconds.Oct 15 17:09:06 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, Adding static route for client address: 172.17.1.1 Oct 15 17:09:06 [IKEv1]: Group = OurIPSEC, Username = person2, IP = 197.79.9.227, PHASE 2 COMPLETED (msgid=c9359d2e)
Maybe you are looking for
-
All default routing value has to be changed, while changed the work center in production order
Dear friends, our client they want to change the work center in production order.according to production version work center also they are changed.so while change the WC,all the default value has be changed as per routing what we maintained in routin
-
InDesign CS6 print number of copies issue
Hello! I have a document that I needed 25 copies of, so I set the # of copies to 25 and off it went. No issue. However, now when I go to a different doc and I print, the # of copies stayed at 25 when I only needed 1. I have to remember to change the
-
Read a schedule task log, please help!
The shcedule task I a few months ago work nicely however this morning I noticed the task was completed only at the beginning and the process seems to stop. I went to the application log, no error was listed from this process then I went to the sched
-
Systemd-hostnamed.service fails to start
I'm finding the systemd-hostnamed.service isnt working $ sudo systemctl --state=failed [sudo] password for kevdog: UNIT LOAD ACTIVE SUB DESCRIPTION ● systemd-hostnamed.service loaded failed failed Hostname Service LOAD = Reflects whether the unit def
-
Charged a disconnection fee for BT Total Broadband...
I can barely suppress the anger I feel as customer service at BT reaches a new low. After months and months and months, and call after call of talking to nice but totally ineffective people in which I tried to get all my BT services moved from one h