General question for Forum re: e-mail updates

Is anyone else receiving updates to this Forum in your e-mail, and if so, have you started to see the line-break character string scattered throughout the body of the e-mails? That's a left arrow, the characters "br", a slash, then a right arrow. This started happening to me on Saturday. My Friday stuff is fine, but starting with Saturday it's cluttered with < br / > every place there should be a line break...
Edited by: Mark Thompson on Oct 20, 2008 11:56 AM

Yes, this problem has been brought up by some of the Oracle Aces. It has been a known problem since last week. Check out the thread below and if you wish, you can add your comments as well.
HTML markup in email

Similar Messages

General question: Apple support by e-mail

Is there no chance to contact Apple for support by e-mail? Crawling through the support pages, I only found a support telephone number which is not available after 7.45pm. For iTunes, they give e-mail support. For the iPod touch they don't, as it seems.
Other question, if officials from Apple are reading this:
Why is there no "General" forum to post questions like this?

Sorry but no, Apple does not provide product support by email. The only email support is for the iTunes Store. If you need technical support from Apple, you'll have to call them or visit an Apple Store, if there's one in your area (there are Apple Stores in Hamburg, Frankfurt, and München).
Why is there no "General" forum to post questions like this?
Mainly because these forums are for users to assist other users with technical questions about specific products.
Perhaps if you provide details about your problem, someone here can help. I'd suggest starting a new topic, as the subject of this one is not likely to attract the attention of someone who might be able help you.
Regards.

HT1222 i am not getting the software update tag in the general settings for my iphone, how to update my software then??

I am not getting the "software update" tag in the general settings for my iphone, how do I update my iphone 4 software then????

How to update your iPhone, iPad, or iPod touch

Question for Forum Hosts

Sorry, this is a question for you about how this forum works or what options I am supposed to use, versus being a new problem... I couldn't find a "Contact Us" link to get this question to you any other way.
I posted a message (marked as a question), "Wireless-G Card causes Tecra 730CDT to Hang," on February 14th. I got a reply from "Quad" and I then replied to that reply (and marked it "still not answered"). The now 3-part message was on the main forum list for about 1/2 day and then it disappeared from it completely. I can do a search and find the original message and the 2 replies, but they are not on the main list.
I can't figure out why it is not on the main forum list. Did I do or say something wrong so it was dropped from the list? Did I fail to do some step or check some box that is required before it can return to the list?
I really would like the original message and replies back on the main forum list, as I still have the same problem and am hoping someone will see it and provide a solution to my problem. Please advise.
Thanks,
[email protected]

Hi Ivan,
First, thank you very much for clearing up what I thought was a mystery of my disappearing posting. Basically, I thought my problem belonged in the TE and Tecra Series forum (what I thought of as the "main page") and was dismayed when I couldn't find it in there. Yes, the Wireless Board is definitely the more appropriate spot.
Secondly, thank you too for your opinion on my attempt at jamming Wireless-G onto my old laptop. I am seeing that you and Quad must be correct... the fact that the 730CDT works so well with my 10/100 wired card made me feel it could handle everything.
I have to admit I have never tried slower Wireless-B. Technology has moved so fast and prices have dropped so much that it was cheaper to buy a brand new boxed kit (router and card) for Wireless-G than it was to buy an old Wireless-B set up... I got caught up in getting the best deal instead of making the best technology match.
I will close this question on "where's my posting?" but will leave the original "730CDT Hang" posting alive for awhile longer.
Many thanks again,
Wayne

OWB general questions for effective use.

Hi all,
I have been using OWB for a while now, and am getting to the point where I want to make sure I am using it effectively.
For example, how does one decide what to include in one project, or to split it up into multiple projects? I am loading a warehouse, and so far I am only loading raw data into tables.
My next step will be to perform ETL on the raw data and start forming more structured warehouse data. Would that step be better contained in a separate project? Would I need to repeat the definitions of the tables in the loading project? Should I just keep the whole thing in one project? The loading project is quite large, as we have raw data from many sources, and it seems to get one file in takes about 5 - 7 OWB objects (flat file, ext table, 2 - 3 mappings, process flow, 1 - 2 tables.)
So I have dozens of mappings, tables, etc.
Even though much of the data comes from different places, it is generally used together by the end users, and the ETL will likely also need to use most of it together.
Is there any "Best Practices" posted anywhere?
Another question that has come up is this: It seems the idea is to create the warehouse structures completely in OWB and deploy to the DB. However OWB doesn't allow for a full table definition, for things like Triggers, or for advanced features due to a later DB version.
So does one just create a "phantom" entry in OWB that is never deployed, and then create the actual table manually, or deploy and then modify manually to add the trigger?
Or are we not supposed to be using DB triggers, and instead control everything through OWB?
Any insight would be appreciated.
Thanks

Hi
I think the kind of questions you are asking are more aimed at methodology's not so much OWB. There are plenty of sites you can get this kind of info from one but not necessarily the best being <http://www.ittoolbox.com/>
In any case we use three projects and multiple schemas
project & schema 1 is used to collect data quickly from multiple sources
project & schema 2 normalizes the data (acts as the storage repository)
project & schema 3 is where the datamarts exist (de-normalized data)
this approach allows you to isolate your integration layer from your reporting layer. most changes only affect one of the layers, not all.
as far as creating your structures in owb is concerned I seen no problem, provided you are using a good ER tool and have ironed out any potential problems.
I have certainly created triggers manually and added them after deployment, but in most cases you can use Transformations, post-mapping, and pre-mapping processes to do the same thing, after all the data should only get into the target through a mapping. If it gets in any other way, you have a hole in you bucket.
Chris

Question for Forum Administrator

I'm having a few login problems with this forum. For instance, I have to login every time I visit the forum, the forum doesn't remember me as being other than a guest when I want to post. I also have to use a slightly different login name than my profile name to get in.
Thirdly, I can't access My Questions on the right side of the page. I get this:
500 nextPageStart is undefined.
How can I get this stuff fixed? If this isn't the right place to post this stuff please guide me where to go. Thanks!

Hi GothBoy, Things like this need to be posted and replied to in the Feedback about Discussions forum. Your post will not be addressed in this forum. Thanks!
Cheers!
DALE

General question for LabVIEW+iMAQ application productivity

We have received new biotech robotic system with LabVIEW control software. One of the software task is image recognition (robotic vision system). During images processing tasks memory is not used hard, but the CPU is always at 100 % utilization. Now the software is running at the computer with ordinary P4 2.4GHz.
Question: is there any sense to use Xeon system or multiprocessors system for the images processing acceleration? How deep is the LabVIEW code optimized for the different processors?

> We have received new biotech robotic system with LabVIEW control
> software. One of the software task is image recognition (robotic
> vision system). During images processing tasks memory is not used
> hard, but the CPU is always at 100 % utilization. Now the software is
> running at the computer with ordinary P4 2.4GHz.
> Question: is there any sense to use Xeon system or
> multiprocessors system for the images processing acceleration? How
> deep is the LabVIEW code optimized for the different processors?
The LV code isn't very optimized specific to different CPU
architectures. A machine with bigger chip caches will probably give the
biggest advantage.
As for multiCPU, this really depends on how a LV diagram is written. I
saw a presentat
ion several years ago showing the gains a multiprocessor
system would give you in a vision system. If the diagrams are written
with parallelism in mind and the IMAQ VIs are made reentrant, the
multiple was good, close to the number of processors. But of course, if
there is no parallelism on the diagram, or the subVIs aren't reentrant,
the other processors have little to work on.
I'd ask the manufacturer of the biotech system if they have tried it or
designed it to scale. If I'm misunderstanding and you bought it from
NI, then I assume you have access to enough of the source code to make
things reentrant and program for parallelism. If you have trouble
writing your code for parallelism, ask more questions.
Greg McKaskle

TS3510 Multiple devices on same email account, have a question for forum??

Hello, my son who lives with my ex-wife has an itouch with facetime and imessage. His itouch is set up under my ex-wife's email account. I am aware and have been, that whenever he and I use imessage she receives all the messages on her iphone as well. My question is, can she view facetime conversations as well between my son and I on her iphone?
Thanks!

Not unless she is looking over his shoulder. Facetime call will be answered on one device and the other device cannot join in as far as I know

Question for forum moderators

Are we allowed to advertise feature requests we have placed in order to gain "weight" for our requests?

garywpaul wrote:
I dont recall if it was a bug that hit the board, but David Powers said by signing our and signing back in should cure it, at least it did for me.
Yes, it's a bug in the system. The only known cure is to log out and log back in again. It usually clears up the problem.

Orded IP4, but question for forum vets

My wife and I have a 3G and I have ordered a 4 for both of us. It's one of the "ships by July 14th" orders. We are both very excited and anxious to get it, but are also quite troubled by what I read on these boards and various others blogs/sites about it's various issues.
I'm not asking if I should cancel my order, I would like to know if after every launch the "issues" were this great? I'm sure each release had it's problems, and I wasn't checking the boards regularly until now. Is it because 1.7mill people ordered these and there are just that many more out there now than previous releases, or maybe expectations have gotten so high since each phone was so great?
I'm sure (hope anyway) some fixes are forthcoming and some bashing will stop, but I'm curious if this release is par for the course, but a bit 'amped up', or not. I know more people will complain than compliment, but after looking through some history and other discussions for other hardware, I don't see as much animosity as I have here.
Thanks,
Anxiously Waiting

Yes every time there is a release there are many problems. I haven't had one problem that I can think of, I love the iPhone 4. I hate to say for all the people that are having problems but I haven't had a iPhone that gets better reception and download speed are close to double. The video and camera blow away the 3GS and the screen is so easy to read small type now.
If you have these reception issues I would get Zagg film for the sides of the phone and make sure it crosses the breaks in the metal. You can't even see the clear Zagg unless you look for it. I think it will solve the problem and you can enjoy your phone and not worry about when Apple will have a fix. Later down the road you can exchange it when things calm down and stock of new iPhones is up if the problem still occur on bare metal. If 2% of phones had manufacturing problems it would be over 30,000 phones and that's around average or below. So you can imagine how many people are having problems.
I think it's overblown but I don't doubt people are having major connection problems and I also believe some are so obsessed with the situation if a bar drops they have a fit and just try to trash the iPhone when some are having great experiences. It's only been a week and I'm sure there are so many different reports Apple is having a problem figuring out a solution that will fix all.

General Question from forum

where will i get a general understanding on how to make two net/subnets that communicate together which reside on the same router 2811.

conf t
interface fast 0/0
ip address 192.168.1.1 255.255.255.0
no shut
exit
interface fast 0/1
ip address 192.168.2.1 255.255.255.0
no shut
exit
then connect a PC to fast 0/0 (if directly use cross cable) and give it the IP 192.168.1.2 255.255.255.0 gateway: 192.168.1.1
then connect a PC to fast 0/1 (if directly use cross cable) and give it the IP 192.168.2.2 255.255.255.0 gateway: 192.168.2.1.
both computer should be able to ping each other

General Question for Learning

Hi,
Can anyone pls explain me.. When DBWR writes the data from DB Buffer Cache to Data Files ? what i'm thinking is if user COMMIT the transaction. is this right ? Pls Correct me if i'm wrong if possible pls explain me...

vlethakula wrote:
Your datafiles can contain uncomiited and commited data.
When you issue a commit, message COMMIT COMPLETE would be displayed that means those changes are written to redolog files from log buffer cache(you are safe these changes are written from memory to files. As files are permanent storage)
it is not necessary that those changes are written by dbwr from block buffer cache to datafiles;
DBWR is lazy process ,it invokes
upon checkpoint
buffer cahce needs spaceThank you vlethakula

General question for 'IN'

Hi all,
Although this is simple, but I really do not understand why it does not work.
I have 4 conditions that need to be checked, in str4, the option is NP, but why it still meet the if statement condition below?
It seems like it is performing as OR instead of AND.
Please advise how could my code will be, if I do not want it to meet the If statement.
types: begin of tr_str,
            sign   type c length 1,
            option type c length 2,
            low    type co_sttxt,
            high   type co_sttxt,
           end of tr_str.
data: lr_str type range of tr_str,
      wr_str like line of lr_str,
      gv_str type co_sttxt.
wr_str-low    = 'str1*'.
wr_str-sign   = 'I'.
wr_str-option = 'NP'.
append wr_str to lr_str.
wr_str-low    = 'str2*'.
wr_str-sign   = 'I'.
wr_str-option = 'CP'.
append wr_str to lr_str.
wr_str-low    = 'str3*'.
wr_str-sign   = 'I'.
wr_str-option = 'NP'.
append wr_str to lr_str.
wr_str-low    = 'str4*'.
wr_str-sign   = 'I'.
wr_str-option = 'NP'.
append wr_str to lr_str.
gv_str = 'str4 str5 str6 str7'.
if gv_str in lr_str.
write: / 'do something'.
endif.

The logic works because the IN does work as a series of OR statements. If any of the entries are true then the IN is true.
'str4 str5 str6 str7' satisifes both the 'NP str2' and the 'NP str3'. If you comment out these two entries you will not get the 'do something' message appearing.
Also note that your declaration of the range is a bit odd.
types: begin of tr_str,
            sign   type c length 1,
            option type c length 2,
            low    type co_sttxt,
            high   type co_sttxt,
           end of tr_str.
data: lr_str type range of tr_str,
      wr_str like line of lr_str,
      gv_str type co_sttxt.
This actually gives you a range of ranges. Is that what you really want?
I tdon't think you need your own type and can simply decare it like this:
data: lr_str type range of co_sttxt,
      wr_str like line of lr_str,
      gv_str type co_sttxt.

Newbie question - general question about e-mail sync

Hi,
I have a general question about email sync and BlackBerry smartphones. Are there any devices that allow email syncing with a Microsoft Exchange 2007 system that do not require the BlackBerry Enterprise server?
Thanks; sorry if this has been asked before but I was unable to find it in the forums, documentation, etc. Everything I found assumes that for this kind of environment you will be using a BlackBerry Enterprise solution, but I can't assume.
Thanks again.
Solved!
Go to Solution.

Hi and Welcome to the Forums!
If the Exchange server has anything that faces the internet (OWA, POP, IMAP), then BIS can be used to handle email (only email...calendar and contacts require BES to sync OTA).
Or, a PC, inside the network (but with an internet path) and logged into the email server (using Outlook), can be left running, using the RIM Desktop Software's Desktop Redirector capability to forward messages to the BB.
Those are basically the options.
Hope that helps! Let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

1. Mail update for v.2.1.3 for Tiger 2. OS10.5 3. SMTP server intermittent

1. Is there any Mail update for OS 10.4.11 users beyond v. 2.1.3?
2. Is there any version of OS 10.5 (Leopard) installable on G4s described below? I know OS 10.5.6 needs a faster processor so cannot be installed.
3. MAIN QUESTION: I have concluded after months of apparent SMTP server problems that the cause lies with neither my main ISP (ATT-Uverse) nor with the 2 email accounts we have a local dial-up/DSL ISP now owned by Cincinnati Bell from which we POP and send (SMTP) server. ATT-Uverse has approved, and disabled filters to prevent, this unusual practice for one of their customers to use a 3rd party's SMTP server and the Cinbell firm also has no problem.
Nevertheless, multiple times a day, my password is refused and 'Mail Connection Doctor' reports that 'trying to log into this SMTP account failed.' The result is that I can only send mail to addresses in the same mail domain ['@name.type']. Both ISPs, however, report that all my settings are correct, are working, are pingable, etc. Sometimes just quitting and restarting Mail clears up the problem for a while. Anyway for many months and many reasons, I always assumed the problem lay with the ISP or with connections between my computers & the POP & SMTP Mail serving ISP. This ISP sent a technical manager to my location who set up a PC computer using Outlook with _my settings_ and with an ethernet connection to my ATT-Uverse Router. He had no problem using Outlook for sending or receiving test messages.
So after much effort by various IT technical support staff from two different ISPs, I am forced to think that the problem while described as the SMTP server's refusal to accept my established passwork is really internal to Mail v.2.1.3 and the settings I have to use. In this case, to enable SMTP service on Port 25, I do need to use extended authentication (i.e. full email address in one field and password in another.
Has this issue been reported by others and is there a fix or workaround. I would prefer to continue using Apple's Mail client & to use POP mail rather than another client or a ;cloud; connection like Google Mail.
Thanks.
Message was edited by: Wylieman

1. Is there any Mail update for OS 10.4.11 users beyond v. 2.1.3?
No.
2. Is there any version of OS 10.5 (Leopard) installable on G4s described below? I know OS 10.5.6 needs a faster processor so cannot be installed.
It'll run fine, you just can't Install it... LOL
There are a couple of workarounds though, installing it on a fast enough PPC Mac to an External Firewire Drive, or editing the check for that CPU Speed, but you'll have to search for, like....
http://lowendmac.com/osx/leopard/unsupported.html
3. MAIN QUESTION: I have concluded after months of apparent SMTP server problems that the cause lies with neither my main ISP (ATT-Uverse)
Hmmm, I don't think I've ever read of anyone having more problems than ATT!?
So after much effort by various IT technical support staff from two different ISPs, I am forced to think that the problem while described as the SMTP server's refusal to accept my established passwork is really internal to Mail v.2.1.3 and the settings
Hmmmm,
Open Keychain Access in Utilities, use Keychain First Aid under the Menu item, then either check the Password under that item, change it, or delete it and start over.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544
Drag this file to the desktop and reboot...
/Users/YourUserName/Library/Preferences/com.apple.keychainaccess.plist
Re: Keychain is no longer able to update itself when I upgrade an application...
http://unsanity.org/archives/2007_01.php

General question for Forum re: e-mail updates

Similar Messages

Maybe you are looking for