General Settings not retained when connecting via VPN

Forum,
We have a user who connects to SAP via a VPN connection. Since then they have found that any form settings/column amendments made are not being retained when next logging into SAP.
When these changes were made direct in the office, they are retained.
My question. Is there any differences in how the settings are retained within SAP when accessing via a VPN?
Regards,
Juan

Hi,
When using your VPN are yo using Terminal LIcense or Remote Desktop Connection?
Please do the following to save form settings:
1. Only 1 module should be open when using form settings.
Close other modules that doesn't need.
2. Close the module after changed. To make sure the settings are saved.
3. Always close all the module before exiting SBO program, use the click FIle and Exit habit.
4. Terminal Licensing should be use when connecting remotely.
Thanks.
Clint

Similar Messages

Kerberos issue when connecting via VPN

Hi,
I am have some issues when connecting via VPN.
The following kdc log is issued when I log via VPN
May 02 12:12:21 ATHENA.MYDOMAIN.LAN krb5kdc[163](info): DISPATCH: repeated (retransmitted?) request from 192.168.2.5, resending previous response
May 02 12:12:21 ATHENA.MYDOMAIN.LAN krb5kdc[163](info): TGS_REQ (7 etypes {18 17 16 23 1 3 2}) 192.168.2.5: UNKNOWN_SERVER: authtime 1146535939, [email protected] for ldap/[email protected], Server not found in Kerberos database
I also have a system log May 2 12:12:21 ATHENA DirectoryService[41]: GSSAPI Error: Miscellaneous failure (Server not found in Kerberos database)
This logs only happen while logging through VPN.
Any idea?
Cheers
Ben

Hi,
When using your VPN are yo using Terminal LIcense or Remote Desktop Connection?
Please do the following to save form settings:
1. Only 1 module should be open when using form settings.
Close other modules that doesn't need.
2. Close the module after changed. To make sure the settings are saved.
3. Always close all the module before exiting SBO program, use the click FIle and Exit habit.
4. Terminal Licensing should be use when connecting remotely.
Thanks.
Clint

Users can only connect to RD farm website and cannot remote into terminal server , when connected via VPN

Hello,
I have a RD farm using 3 Win 2012 servers (1 broker and 2 session host), for internal use only, have not
configured gateway for internet access.
Users are able to connect to RD farm website and remote into terminal server, within office
but can only connect to RD farm website and cannot remote into terminal server , when connected via VPN
Its takes long time at securing connection and fails.
Thanks

Hi,
Thank you for your posting in Windows Server Forum.
First of all I would suggest you to configure RD gateway role on your server and pass all the connection through it because it’s a best practice to use RD Gateway in RDS Farm.
Apart from this, if you are not using RD Gateway then you must check that you have successfully forwarded port 3389 for RDS to access via VPN. Also check that you have made configuration under IIS Manager to enable Forms Authentication. Please check
this link.
In addition, please refer beneath article for additional details.
1. How to Access Windows Remote Desktop Over the Internet
2. Remote Desktop Services in Windows 2008 R2 – Part 3 – RD Web Access & RemoteApp
(For reference)
Hope it helps!
Thanks,
Dharmesh

T420 - external 24" monitor DVI- Displayport : not detected when connected via KVM switch

Hi,
I've been using a 2port USB KVM Switch from InLine for a long time connecting a mac mini and a macbook pro
to a 24" LCD. Recently I had to replace the MacBookPro with a T420. Unfortunately the T420 does not detect the
monitor, when connected via the KVM switch.
I tried:
A) T420 -> Lenovo Displayport to DVI-Adapter -> KVM-Switch -> 24" monitor: NO SUCCESS
B) T420 -> Thinkpad miniDock Series 3 DVI Port-> KVM Seitch -> 24" monitor : NO SUCCESS
C) T420 ->Thinkpad miniDock Series 3 DVI Port-> 24" monitor - > SUCCESS
D) T420 ->Thinkpad miniDock Series 3 VGA Port -> 24" monitor - > SUCCESS
So I have a workaround, but leaving out the KVM switch is not a long term option.
This is all on Win 7 professional / 64bit
Using config (A) I then installed the Intel HD Graphics Driver version 8.15.10.2342 16 May 2011
SURPRISE: during driver install, the monitor WAS detected!!!
SECOND SURPRISE: after reboot I was back in the old situation where the monitor was NOT DETECTED
CONCLUSION:
Seems like a software issue with the Intel HD Graphice driver.
ANY HINT/COMMENT/HELP highly appreciated!
Thanks,
Michael

hey mgold,
as the T420 works correctly with the external monitor and with the miniDock ; it is sad to say the the KVM switch is non-compatible.
I would recommend that you get in contact with the manufacturer of the KVM. At the same time, try uninstalling the current video drivers of your T420 and see if it makes any difference with the KVM if the T420 is running on a generic driver
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Sharepoints not displayed when connecting via FTP

Hi All,
Leopard Server 10.5.8 xserve 2 G5
I have an issue with the built in FTP server.
All my share point are set to be shared via FTP, yet they are not displayed when users log in and access the server via FTP.
In Server Admin, Authenticated users see: FTP Root and Share Points.
All relevant users have access to the FTP service, in the server settings.
ACL permissions have been set correctly for those users.
This is *sudo sharing -l* tells me, for all share points.
name: Archive
path: /Volumes/External RAID/Archive
afp: {
ftp: {
name: Archive
shared: 1
guest access: 0
smb: {
Is there anything that I missed?
Thanks for you help,
Johan
Message was edited by: JohanDouma

Hi,
Sorry for the late respons.
My config:
1 mac mini with OSX Server leopard
1 airport extreem
1 external HDD LaCie
An airport Extreme has the posibility to share a network drive. So I plugged in my HDD into the airport extreme and configured the thing.
Than I turned to the mac mini. And started configuring my sharepoints.
So one of my sharepoints is the external HDD.
There are several directories on there that I want to make available thru the legacy protocol FTP.
So by just making these sharepoints available thru FTP i expected for these sharepoint to show up in mij directories if I connect to my external IP with a FTP client like CyberDuck.
(portforwarding and everything is not the problem, because I can make a connections and all directories show up as browseable.
But the sharepoint I made on the network drive just show up as an bin or another kind off file I can't open.
Everything else is browsable..
They show up by the way in the root dir of the FTP Server as regular symbolic links.
Thru Finder I can browse them and do everything. But as soon as i connect over the internet, lan or whatever, these symbolic links are not the access point towards the directory underneath.
They show up with the correct name just not as an dir I can open.
Hope this helps
Grtz and thnx
(typed on an iPad and not fully used to it)

Why will Firefox will not open when connecting via Remote Desktop?

I have Firefox v. 6.0 or 7.0 installed on a Win 7 machine. It works fine locally, but when I connect to the machine via Remote Desktop it will not start.

Make sure that the pref dom.storage.enabled is set to true on the about:config page.
* http://kb.mozillazine.org/Dom.storage.enabled
* https://developer.mozilla.org/en/dom/storage (Storage location and clearing the data)
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

Time Capsule not visible when connecting via range extender

Hi,
I have configured a TP-Link WA750RE to expand the range of my Time Capsule's wireless network. The range extender works fine for surfing the web etc., but the Time Capsule doesn't show up as my Time Machine backup device and the Time Capsule is not visible in my Airport Utility. What's even stranger is that when I click on "Configure other" (shift + command + o) in Airport Utility and type in my Time Capsule's IP-address and password, I can still access the devices' configuration menu.
When I move my Macbook very close to my Time Machine to connect directly to the wireless network, leaving out the range extender, none of the above mentioned problems occur. The TP-Link range extender has no NAT or port configuration that could possibly cause this problem, so I'm out of ideas for a way to solve this problem.
Thank you in advance for your help.

A non-apple range extender is not passing the protocols that apple uses.. eg bonjour.. This is a standard problem and why you stick with using Apple's own routers for extensions.

Ipad apps won't load when connected via Comcast wifi

We are trying out Comcast for 30 days. We already had Uverse so right now we have both. When connect via Uverse everything works fine on my iPad as always has. Internet access, apps load etc. when I switch over to the Comcast wifi, I can access internet just fine. Sped test are all hella fast. But for some reason a few of my apps/games won't load. for example I have a price is right bingo game. It will not load when connected via Comcast. I get an error that say it won't connect and to check my internet access. and my internet access will be working fine. If I switch back over to uverse the game will load. There are a couple other apps doing the same thing. Anyone seen this before? I have an iPad Air 2 on iOS 8.1.2

Hello, SockMonkeyGirl.
Thank you for visiting Apple Support Communities.
I understand that you are unable to use your internet based applications when connected to the Comcast network only. I would recommend making sure that this Comcast network settings are updated to the recommend as outlined below. Also make sure that all firewalls are disabled as well.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/en-us/HT202068
Cheers,
Jason H.

Server Admin not connecting to Leopard Server when accessing via VPN

Hi everyone,
Recently, as the title suggests, Server Admin (or Server Preferences, for that matter) would not connect to my remote server via VPN. I'm quite sure that the server is working nicely, as the users (both of them lovely young ladies with considerable charms, which makes on-site support quite interesting, if distracting) didn't call me to complain, and I can login via SSH with no problems.
The server is a Mac Mini, connected to an Airport Extreme (gigabit N), which in turn connects to our ADSL modem, if that helps any.
Now, I did tinker around a bit with the settings before this happened, so I think it's probably my fault (well, I started my "career" of administering this server a week ago, what do you expect), so I suppose I may have inadvertently limited access to a service required for Server Admin and Server Preferences to function.
If anyone could tell me which services are absolutely necessary for Server Admin to function, or at least where to start looking, I'd be immensely grateful. I didn't yet go on site to try and wrestle the whole thing from there, as the travel costs are non-trivial, so I'd rather do it remotely, if at all possible.

This is exactly the difficulty I am having with a 10.5.4 Intel xserve. I have established a VPN connection that connects me to my business LAN, and I know it has carried out the connection because there are a number of things I can access properly that are not available on the public internet. For instance, my LOM ports are restricted to my business LAN, and when I connect to the server via VPN I can access teh LOM ports and using server monitor. However, when I try to use Server Admin, nothing works. It won't connect. I too am confused. All traffic to the xserve is allowed via the business LAN. I thought all traffic was supposed to be routed to the VPN server when connected via a VPN. If this is the case, shouldn't Server Admin work? When I go on site and connect my computer directly to the business LAN, I have no difficulty using Server Admin.

Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB. I already tried uninstalling and reinstalling iTunes....still nothing. Any ideas?

Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

Mac pro does not recognize ipad device when connected via usb port, suggestions?

mac pro running os 10.6.8 does not recognize ipad device when connected via usb port, suggestions? itunes 10.7

Here's a troubleshooting assistant: http://www.apple.com/support/ipad/assistant/itunes/
The most likely issue: Have you plugged your iPad into a USB port that is not directly part of your MacBook Pro?

My new computer with Windows 8.1 does not recognize my iPhone when connected via USB.

My new Dell Computer with Windows 8.1 does not recognize my iPhone 5 when connected via USB. I have reinstalled iTunes to no avail.

Hey, I may have to if I can't get this one to work!!
I have tried a different USB to no avail. Both cables work on my old Dell so I don't believe they are the issue.
I uninstalled iTunes as directed by Apple Support and reinstalled. Apparently, Apple Mobile Device Support is not loading with it because it does not show up in programs.

10.6.1: Can't resolve FQDN when connecting via WLAN / Airport Base Station

Hi everybody,
after hours of work and having read many helpful topics in this forum (and other) I've successfully setup a Single Signon Environment for my home office. It's a dual core macmini server running 10.6.1 and only mac clients.
The server is connected via switch to my airport extreme base station. This airport station uses PPPoE to connect to my ISP and it has the DHCP service running, handing out the clients' IP addresses. The server and the switch have all static IP addresses.
My issue is the following:
Whenever I connect via wifi or vpn using my MBP, I am not able to "bind" to the server (via system preferences : users : login setting) using the FQDN. The error is "can't resolve address. -2200" Instead it only finds myserver.local - and then I am able to set up my wifi connected client.
However, when I set up the client with the .local address I am unable to get a kerberos ticket for my users. The ticket viewer says, that it can't resolve the address for myserver.mycompany.private
I was able to get afp or ical to work on my vpn or airport connected clients when I used the server's IP address instead of a domain name - but only with kerberos turned off and with other problems.
I've heard that if everything is configured right, the server should show up in every clients' sidebar with its FQDN and NOT the bonjour name. Right now it shows only the bonjour name - even on the clients connected via Ethernet.
The other strange thing is that when I log into my client system I still have to authenticate with ticket viewer in order to get my kerberos ticket. Usually Single Signon should work with the login window, right?
I really don't know what else to do. I double checked my DNS settings and everything seems ok. I entered the FQDN of the my server in the airport stations' DHCP settings as "LDAP server" - nothing changed...
Do I need to use the server's DHCP service instead of the airport station's DHCP? And if I do this, how to I turn off airport's DHCP? It does not seem to be possible when connected via PPPoE to my ISP.
I am unsure what to do in order to get things to work. Anybody out there who can help?

Hi Davidh and thanks for posting!
I had 3 DNS entries in my client's network settings - one was the server and the other 2 were from my ISP. Removing the ISP's DNS entries and keeping the server DNS IP solved my kerberos issue. Wow!
I'd never thought that it won't work with more than the server given as DNS entries. I'll need to check this with my iPhone later, because I had a similar issue with that device yesterday when trying to connect via VPN.
Thanks very much!
Still one question:
The sidebar of my clients still don't show the server's FQDN - but only its bonjour name. Is this right? I read in another forum that the client's sidebar should show the FQDN if everything is configured right.

Can't access non-VPN resources when connected to VPN

I need to access web based resources over a VPN for work. My admin gave me the connection parameters, and I can connect to the VPN and access what I need, no problem. But when connected to VPN, I can't access websites, Subversion repositories, Skype, etc. that are not on the VPN.
On Windows, there's a connection property on VPN connections called "Use default gateway". With that option cleared on my Windows machine, I can access both VPN and non-VPN resources simultaneously. I can't spot anything equivalent in the VPN connection in Network Preferences.
So I guess the question is: what network settings on Mac (Snow Leopard) will enable me to access both VPN and normal resources simultaneously?

I have found a workaround. It isn't optimal, and it's disappointing that VPN is so poorly supported on Mac. Though the specific IPs are probably applicable only to the particular VPN I connect to, maybe the general idea can be of help to others and your network admins can supply the particular IPs you need.
1. My Admin had me open Network Preferences, select the VPN connection, click the Tools icon at the bottom, and select Set Service Order. In that dialog, move the VPN connection to the bottom of the list (my EVDO modem that gets me my internet connection is fist in the list). Apply this change.
2. Next, my admin asked me to run the following in Terminal, once when VPN was not connected (but internet was connected), and again with VPN connected, and send him the output:
*netstat -nr*
3. After looking at the terminal output, admin told me to run the following in Terminal with the VPN connected:
*sudo route add -net 10.123 -netmask 255.255.0.0 10.123.50.1*
After disconnecting both VPN and Internet connection and reactivating each in turn (internet, then VPN), I was able to access both VPN and non-VPN resources simultaneously.
The bad news is that every time I need to connect I have to run route add in Terminal and enter my password. I will probably make a shell script to at least run the command so I don't have to remember it.
Here's hoping this helps if others bump into this pernicious little problem.

Financial Reports Client - 11.1.2.1 - Won't connect via VPN only?

When I try and connect via VPN only. I get: You are not authorized to use this functionality. Contact your administrator.
Here's the log from client. We have ensured the client version matches the server version exactly. Funny as when I'm directly on their network I can connect just fine. Hoping this log will point to solution.
Log:
[2012-06-01T10:31:45.196-04:00] [EPMFR] [ERROR] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000JUcTOpZD4io5KVt1ie1FmD9H000000,0] [SRC_CLASS: com.hyperion.reporting.registry.FRSystem] [SRC_METHOD: lookupHsServer] [[
com.hyperion.reporting.util.HyperionReportException: Could not connect to the server.
Please make sure that the server is running as specified in the logon dialog (including port number if not default).
     at com.hyperion.reporting.registry.FRSystem.lookupHsServer(Unknown Source)
     at com.hyperion.reporting.javacom.HsServer.getServer(Unknown Source)
     at com.hyperion.reporting.javacom.HsHelper.getServer(Unknown Source)
[2012-06-01T10:31:45.273-04:00] [EPMFR] [ERROR] [] [oracle.EPMFR.core] [tid: main] [ecid: 0000JUcTOpZD4io5KVt1ie1FmD9H000000,0] [SRC_CLASS: com.hyperion.reporting.javacom.HsServer] [SRC_METHOD: getServer] [[
java.lang.NullPointerException
     at com.hyperion.reporting.javacom.HsServer.getServer(Unknown Source)
     at com.hyperion.reporting.javacom.HsHelper.getServer(Unknown Source)
]]

I think you have already posted this problem on another post, I said it is possible it could be a ports issue.
Have a look at the following http://www.oracle.com/technetwork/middleware/bi-foundation/epm-component-communications-11121-354680.xls
Select FR studio as the client and it should give indication to the ports that need to be opened.
Cheers
John
http://john-goodwin.blogspot.com/

General Settings not retained when connecting via VPN

Similar Messages

Maybe you are looking for