General Shuffle questions...

I'm thinking of getting my Mom a Shuffle ... On the plus side the user interface is very nice and I think the clip feature would be very helpful for her, and iTunes would be easier than dealing with MS MediaPlayer. On the negative side, it seems like any iPod will have to chose either machine to load from whereas regular lowly MP3 players could be loaded from multiple places, multiple Operating systems. (She has an older WinXP machine and my dad has an iBook... and a Mac Classic
What are the differences in the iTunes screens for the Shuffle vs. other iPods? Do you still have an Audiobook section and everything? Are there any options to control the Shuffle - like the volume limit or the thing that levels all volume levels to the same loudness.
Is the sound quality from a Shuffle the same as from other iPods?

Sorry, I did not explain myself very clearly.
What I meant was, once the songs are on the shuffle, and you are out listening to it you can't choose what song to listen to (easily). Not really an issue for me I like the randomness of the shuffle and I usually sort the list in contents by song, so if I switch from shuffle to order, I can usually guess what song is next. My daughter does not like it because if she wants to listen to a particluar song, she needs to hit next until the song comes up - she doesn't know when that will be.

Similar Messages

Can i skip music when on general shuffle but play it in a playlist?

Quick question, I am currently adding some Christmas music to my iPod, I would like for it to be skipped when on general shuffle but to still shuffle when in a playlist. Is this possible?
When I select "skip when shuffling" it doesn't play the music when on a normal shuffle, but then again it just plays the same order of music in the playlist - no shuffle possible. Kind of a catch 22. Any help?

When I select "skip when shuffling" it doesn't play the music when on a normal shuffle
That is how it's supposed to work.
but then again it just plays the same order of music in the playlist - no shuffle possible.
Correct. You don't wnat these to play when Shuffle is selected so they don't.
They will only play in order.
It's not a catch-22 at all.

ITunes Party Shuffle - Questions

I have read several discussion but have not found one exactly on point with regard to the following:
1. If I choose any Smart List as my source for the shufle (say Hip Hop/Rap), it plays album in their exact orders. It does not shuffle b/w albums. Example: it will play just Beastie Boys.
2. Sometimes when I pick a playlist as the shuffle source, I get the following error message "The playlist __________ does not contain any songs playable by Party Shuffle." Why? What does this mean?
3. General, non-Party Shuffle question: why is it that in my Library some songs are checked (the box is checked), while other songs are not checked? What is the significance?
Thanks everyone!
IBM ThinkPad Windows XP

1. Check your shuffle settings to make sure you've got them enabled the way you like. Edit > Preferences > Playback You can shuffle by song, artist, or album.
2. Are the songs on this playlist checked? They won't play if they're unchecked.
3. If you want songs to play and be part of shuffle, etc. they need to be checked. ITunes ignores them when they're unchecked.

Captivate 5: Shuffling Questions in a Quiz

Hi all,
I know it's possible to shuffle answers in a quiz, but is it possible to shuffle questions? I would like to shuffle my questions so that users are presented with quiz questions in random order.
Thanks!
Brittany

Hi Rod,
Never thought of using the Question Pool, but that's a great suggestion. I think that may do the trick!
Much appreciated!
Brittany

Shuffling Questions won't work

Hi there,
I'm using Presenter 7.0.6 and I have the following problem:
I have a group of questions (30 questions), and I choose 25 out of these 30 questions for a quiz.
So far, so good.
But: I also chose: "Shuffle questions" in all the fields I found, but still each time I (and others) open this quiz, it's always the same 25 questions and always the same order.
So, they are not shuffled at all...
Also, the viewser.xml correctly shows shuffleQuestions="1"
What am I doing wrong???
Cheers,
Blik

Dear Shubhi,
thank you for your help. Since your solution resolves my problem, I take the liberty to post it here for other people who may have the same problem:
Shubhi Shukla Dubey wrote:
Question Shuffling is not working properly if “Enable Reporting” is unchecked.
I suggest you to do following steps:-
Go to Manage>Quiz>Reporting
Check “Enable Reporting for this presentation” checkbox
Publish the presentation
Best regards
Blik

General dreamwevaer question

hello dreamweavers.
im a newbie going to use dreamweaver from next week and beyond,so id like to ask the following:
should i design the website in photoshop and then import it into dreamwevaer,in order to code it?
is dreamwevaer flexible in design point of view,or is it mostly getting finished designs such as headers,footers,flash banners,
and then building up the site where things so and such.
thank you.

Hello Nancy.
seems like an informative website,i can see it is easy to understand the
basics.
Στις 23 Μαρτίου 2012 4:29 π.μ., ο χρήστης Nancy O. <[email protected]>έγραψε:
Re: general dreamwevaer question created by Nancy O.<http://forums.adobe.com/people/Nancy+O.>in
Dreamweaver - View the full discussion<http://forums.adobe.com/message/4283588#4283588

Some songs can't be loaded on 2nd gen ipod shuffle (question with answer)

I'm getting the following message when trying to load some songs on to my 2nd gen iPod shuffle:
"Some of the items in the iTunes library, including 'Allegro', were not copied to the iPod "iPod" because they cannot be played on this iPod." When I click on the details triangle I get "Allegro" was not copied because the audio format is not supported by the iPod "iPod".
This is happening for many songs that were previously loaded on this iPod. The songs were all loaded into iTunes from CDs. I have tried the iPod reset utility, deleting all songs and reloading, selecting a single song to sync, no luck.
When I do a "Get Info" on these songs they say they were encoded with either iTunes 6.0.5 or iTunes 7.0.2.
OK. Even before I was able to post the question, I found the answer. If I select the songs and from the "Advanced" menu select "Create AAC version", the AAC version can be copied to the iPod. Get Info shows the encoding has changed so AAC and iTunes 9.0.1.
Hope this helps someone else with a similar problem.
david.

You can't "sync" that is automatically update an iPod from multiple libraries or computers. If you want to connect and use an iPod on more than one computer you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply.
Using iPod with Multiple computers
Managing content manually on iPod

A few general agent questions

We've been asked some general questions by our agents that I have been unable to find answers for, (although 4 and 5 are likely working as designed). We are running IPCC Express 7.0(1)SR05_Build504 and these are all phone agents. We do not run the agent desktop client. Any assistance in answering these questions would be greatly appreciated.
1. TransfertoVM softkey "grayed out" while on a CSQ call. Can it be enabled?
2. While logged in to CSQ, is there a way to start dialing prior to
lifting the receiver?
3. Is it possible to handle more than one CSQ call at a time, e.g. put a call on hold and answer
another CSQ call.
4. Upon selecting Agent Login (single-button login), can the agent automatically be put into Ready?
5. Upon Logout, can the phone be returned to the main screen, rather than getting the manual agent login screen?
Again, any assistance in answering these questions would be greatly appreciated.
Thanks,
Roger

Hi
1) Isn't that an IPMA softkey? Never tried it, but whilst it's not in the 'unsupported' list, I wouldn't expect using any IPMA features in conjunction with CAD would get you good results. If it doesn't cause you stuck/ghost calls, I would expect erroneous reports...
2) Being logged into a CSQ doesn't affect the way the phone works.
- You can dial the number then either lift the handset or hit dial (for speakerphone)
- You can press speakerphone or headset then dial
I guess what you are referring to is if you are using the IP Phone Agent in conjunction with a headset? If you are, then the IPPA usually obscures the 'new call' and 'end call' softkeys that you might use if you leave the headset button lit. I guess this isn't the case, as you refer to lifting the receiver? Unless you have motorized lifters.. If that's what you have, you can try getting users to either :
- Manage their onhook/offhook state using the headset key as if it was the speakerphone key (i.e. press it to hang up or pickup)
- Use a headset/phone combination that supports HHC
- Switch to CAD, or CAD-BE if you can't install PC software for some reason.
3) No. The system is designed specifically so that this should never happen.
4) No.
5) Again, no... you can't customize the BIPPA service... If you use CAD or CAD-BE this wouldn't be an issue.
Regards
Aaron
Please rate helpful posts...

Workflow and General Use Questions

Hello,
I'll apologize right off the bat for these novice question because I'm sure the information is probably somewhere in the forum, I just haven't been able to find it. I just purchased Aperture after completing the demo as my library is getting too large to manage using standard file folders. I'm now trying to figure out the best practices for workflow and general use before I invest some serious time into importing and keywording all my pictures.
1) Store files in the there current location, or in the Aperture Library? It seems to me that once they are moved to the Aperture library, you can only access them from within Aperture. I'm thinking I would be better off leaving them in their current location. For one, if I want to quickly grab a picture as an attachment to an email or something it seems easier to grab it from the standard folders. Second (and more important) I do not have room to keep all my pictures on my Macbook, thus most of them are stored on the Time Capsule.
So... Keeping photos in their current location appears to be the best choice for me even though it adds an additional step every time I bring in new photos from my camera. Does this sound right?
2) Is there a way to mark the photos that I have uploaded to my website (Smugmug)? Ideally, I would like to badge photos that have already been uploaded so I can quickly recognize them and ensure I'm not duplicating. I've considered using the rating, or keywords to indicate that a photo has been uploaded but both methods have disadvantages.
3) Any suggestions for general workflow and organization resources (tutorials, books, websites, etc.)? I've looked at the videos on Apple's site but they obviously didn't get that detailed.
Thanks for the help, sorry for the length.

I recommend to Manage by Reference with Master image files stored on external hard drives (note that Aperture defaults to a Managed-Library configuration rather than a Referenced-Masters Library). Especially important for iMacs and laptops with a single internal drive. The workflow as described below in an earlier post of mine uses a Referenced-Masters Library.
I feel pretty strongly that card-to-Aperture or camera-to-Aperture handling of original images puts originals at unnecessary risk. I suggest this workflow, first using the Finder (not Aperture) to copy images from CF card to computer hard drive:
• Remove the memory card from the camera and insert it into a memory card reader. Faster readers and faster cards are preferable.
• Finder-copy images from memory card to a labeled folder on the intended permanent Masters location hard drive.
• Eject memory card.
• Burn backup hard drive or DVD copies of the original images (optional strongly recommended recommended backup step).
• Eject backup hard drive(s) or DVDs.
• From within Aperture, import images from the hard drive folder into Aperture selecting "Store files in their current location." This is called "referenced images." During import is the best time to also add keywords, but that is another discussion.
• Review pix for completeness (e.g. a 500-pic shoot has 500 valid images showing in Aperture).
• Reformat memory card in camera, and archive originals off site on hard drives and/or on DVDs.
Note that the "eject" steps above are important in order to avoid mistakenly working on removable media/backups.
Also note with a Referenced-Masters Library that use of the "Vault" backup routine backs up the Library only, not the Masters. Masters should be separately backed up, IMO a good thing from a workflow and data security standpoint.
Max out RAM in your MB and keep the internal drive less than 70% full.
Good luck!
-Allen Wicks

General BADi question:Call BADi in background job/batch input. Possible?

Hi out there,
i'm using thoe following BADi: /SAPSLL/CTRL_SD0C_R3 (Global Trade Service).
But also, this question is a general question.
If we are calling on screen the transaction VF01, the BADi is called correctly.
But unfortunately it seemes that the BADi is NOT called (im not really sure, cause i can't debug the background task) when we are calling a batch input sequence wth f.e. form bdc_transaction VF01 nothing happens.
Maybe BADi cannot be called in a background task? If it's possible, how could it be monitored. Thare isw no spool entry or anything like that!
Any answer can help.
Thank you in advance!
Regards,
Timo
Edited by: Timo Ehl on Apr 14, 2009 7:27 PM

Hi,
generally BADIs are called in background mode. You can use the following trick to debug your BADI. You just need to create an infinite loop in your BADI implementation. Something like this.
DATA: l_a TYPE c.
WHILE l_a IS INITIAL.
ENDWHILE.
Obviously when your BADI is called in background mode then program will get into infinite loop. You can easily connect and debug running programs from transaction SM50. You need to select your background process and go to Program/Session -> Program -> Debugging. You will jump directly into your BADI methos with infinite loop. Then you will just set value to l_a and you will start debugging your BADI. If you can not find any process then your BADI is not called in background mode.
Cheers

A general OOP question

Hi
I have a general OOP design question, and am wondering if someone could relate an answer to the following design?
I have a class called MediaFolderImport(); - it's designed to build a window with various editing tools in it.
Within it's constructor, I'm calling a bunch of functions to build the window...
   createTitle();
   createInstructions();
   createToolPanel();
   createDataGrid ();
   createOpen();
   createSave();
In my document class, I instantiate it...
public var File_Folder_Import:MediaFolderImport=new MediaFolderImport();
and then...
addChild(File_Folder_Import);
Voila! - the window appears. I WAS very proud of myself.
Now I want to access something inside the window. Specifically, there's a radio button that was created in createToolPanel(); - I want to update it to be selected or not selected when I receieve the user's preference from an xml settings file at start up (xml is loaded into the doc class).
General question:
What is the best practice, smart way to have designed this?
- call createToolPanel(); from the doc class instead of within MediaFolderImport();, and somehow (magically) have access to the radio button?
- leave the design as is, but add some sort of listener within MediaFolderImport that listens for changes to the xml in the doc class, and updates accordingly?
- do it the way I'm trying to, ie try to access the radio button directly from the doc class (which isn't working):
File_Folder_Import.myRadioButton.selected = true;
- a better way someone can briefly explain the concept of?
Another way to explain my design is...
- a bunch of different windows, each created by a different class
- xml file loads preferences, which need to be applied to different tools (radio buttons, check boxes, text fields etc) in the different windows
I read a lot of posts that talk about how public vars are mostly bad practice. So if you are making your class vars private, what is the best way to do the kind of inter-class communicating I'm talking about here?
I think someone throwing light on this will help me solidify my understanding of OOP.
Thank you for your time and help.

You're already very used to using properties for the built-in AS classes and that's the best practice means of configuring your class. It's a "state" that you want to simply expose. The get/set method moccamaximum mentioned is the ideal route.
The main reason you want to use get/set functions is validation. You want your class to act properly if you send an invalid value. Especially if anyone else besides yourself is going to use the class. Plan for the worst.
The general concept is, make a private variable for any 'state' you want to remember using an underscore in the variable name to easily identify it as a private var, then make get/set functions with the same name with any required validation without the underscore.
e.g.
package
     public class MyClass
          // property called 'mode' to track something with an int
           private var _mode:int = 0;
          public function MyClass() {} // empty constructor
          // get (type enforced)
          public function get mode():int { return mode; }
          // set, requiring a value
          public function set isChecked(modeVal:int):void
               // if no value is sent, ignore
               if (!modeVal) { return; }
               _mode = modeVal;
Your validation will go a long way to easily debugging your classes as they grow in size. Eventually they should throw exceptions and errors if they're not valid. Then you will be best practice. Do note that if your validation requires quite a bit of logic it's common to upgrade the property to a public method. get/set should be reserved for simple properties.

Playlist Shuffle question - M Zen M: 3

Hi - have a question on playlists and shuffling them. I have several playlists ranging from around 75 to 500 songs. I tend to play them in shuffle mode, and have noticed that some songs get played a lot, and some almost never. I assume that there is some sort of glitch in the randomizer that determines shuffle order that makes it not truly random - I've seen that before. So I get that this is hard to fix, so I'd like to fix it myself by simply loading a playlist on my computer and shuffling the order of the playlist, then saving it. I figure that the randomizer will still have the same glitch, but the playlist order will be different, so I'll get different songs played often. So I can manage the list this way every time I get bored with the sequence. I've used this technique before with another player I had (Archos Jukebox) and it works fine. Problem is that when I load the playlist on my computer it will only allow me to change the position of track at a time (even if its multiple tracks, its a block at a time). I'd like even to sort them in alphabetical or size or artist or duration sequence, since I think that would solve my problem, but it doesnt seem like this is an option. Any ideas? Thanks?Colin

Anyone?

Best Font for Subtitles? and other General Subtitling questions?

I've never had to use subtitles, until my current project, so I am looking for some general advice and suggestions.
I will be using PPCS3 (on XPpro) as the subtitles (as in the kind that translate a foreign language) will be permanent.
So here are my questions:
1. What is the best font and or what is the most standard font for subtitles? (Font size and other characteristics may be worth mentioning here too.)
2. Is it possible to have an outline around the text as opposed to shadow?
3. What are some general rules of thumb for subtitles that apply to broadcast and cinematic productions?
Thank you.

See also:
FAQ:Why are my titles blurry/wrong?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Writing games for US wireless carriers - general newbie question

I am a newbie to kvm and j2me so excuse me if these question are very basic or if i'm asking the wrong questions.
I have been asked to quickly research writing games in java for US wireless carriers. Ideally I'd like to pick a carrier (e.g. Verizonwireless) and find out more about writing for them. How should I go about researching this?
My research so far has found:
General j2me info:
I did some initial searching in the forum and found that the following link will give me a basic guide to j2me:
http://access1.sun.com/SRDs/access1_srds.html.
If I look at the documentation for -
- Java 2 Micro Edition (J2ME)
- Mobile Information Device Profile 1.0.1 (MIDP)
Is this still the best place to look at online?
Specific wireless carrier info:
I had no luck finding where I should look for information on specific
wireless carriers. Any suggestions? Also am I approaching this the right way or should I be looking at the specific java enabled mobile phones rather than the wireless carrier? Or is it a combination of the two?
Thanks for any help.

If the games are going to be networked then you should find out what type of network the carrier has (TDMA,CDMA,GSM with or without GPRS, etc. what bandwidths.... WAP or I-Mode). Regardless, you should be also concerned with what are the phones available on the carrier and what is their Java support.
shmoove

Some general photo questions

I will be undertaking a major project soon that involves scanning all (and I mean every single one) of my family's photographs so that we have digital copies in case something bad happens to the originals. I plan on using iPhoto to store and catalog the photos. But my question is, when I scan the photos, what file format should I use? My scanner (HP Scanjet 3970) can scan to jpeg, tiff, tiff (compressed), bmp, and gif. which of those should I use? Also, I read somewhere that tiff for macs are different from tiff in windows. Is this true?
Also, what resolution is optimal for keeping an archive of photos? File size is not really an issue since I'll be using an external hard drive that's plenty big.

baldrambutan
what file format should I use? My scanner (HP Scanjet 3970) can scan to jpeg, tiff, tiff (compressed), bmp, and gif. which of those should I use?
iPhoto will handle any of those formats. My suggestion for maximum compatibility is to choose between tiff (uncompressed) and jpeg. Why? they're pretty universal, regardless of computer. As to choosing between them? Well jpeg is a lossy compressed format, tiff isn't. The files sizes are huge with tiff, quite acceptable with jpeg. How much editing will you do? IF not much, then there is little re-saving and jpeg will be absolutely fine.
http://en.wikipedia.org/wiki/TaggedImage_FileFormat
http://en.wikipedia.org/wiki/JPEG
Also, I read somewhere that tiff for macs are different from tiff in windows. Is this true?
Not that I know of.
Also, what resolution is optimal for keeping an archive of photos
The general rule of thumb is 300 dpi is what's required for printing. Screen images require less.
Regards
TD

General Shuffle questions...

Similar Messages

Maybe you are looking for