General SYSVOL migration from FRS to DFSR
Hi all.
I have a question regarding Sysvol Migration from FRS to DFSR.
We have migrated all of our Domain Controllers from Server 2003 to Server 2008 R2 about 2 years ago.
I know that if Server 2003 was in use initially and you upgrade to Server 2008 R2, you need to do a FRS to DFSR migration in order for you Sysvol to make use of DFSR.
My question is if we are upgrading now to server 2012 R2 would there be a time that this would happen automatically or do we still need to do the sysvol migration before upgrading to server 2012 R2.
Another question I have is do we need to do the FRS to DFSR migation on all our child domains as well ?
Many thanks for your time.
Your answers would be appreciated.
Kind Regards,
Shaun
Hi There.
Yes that would be great. I would probably use the active directory removal method but I dont know if this would work as its the last domain contoller and it is not replicating with the top level domain at the moment.
NTDSUTIL would probably need to be used ro list the servers in that domain and remove them and then if I'm correct I would need to remove the domain namig contect with the instructions below.
Removing Orphaned Domains from Active Directory
Determine the domain controller that holds the Domain Naming Master Flexible Single Master Operations (FSMO) role. To identify the server holding this role:
Start the Active Directory Domains and Trusts Microsoft Management Console (MMC) snap-in from the
Administrative Tools menu.
Right-click the root node in the left pane titled
Active Directory Domains and Trusts, and then click Operations Master.
The domain controller that currently holds this role is identified in the Current Operations Master frame.NOTE: If this changed recently, not all computer may have received this change yet due to replication.
For more information about FSMO roles, click the following article number to view the article in the Microsoft Knowledge Base:
197132 Windows 2000 Active Directory FSMO Roles
Verify that all servers for the domain have been demoted.
Click Start, point to Programs, point to
Accessories, and then click Command Prompt.
At the command prompt, type: ntdsutil.
Type: metadata cleanup, and then press ENTER.
Type: connections, and then press ENTER. This menu is used to connect to the specific server on which the changes will occur. If the currently logged-on user is not a member of the Enterprise Admins group, alternate credentials can be supplied
by specifying the credentials to use before making the connection. To do so, type:
set creds domainname username password , and then press ENTER. For a null password, type:
null for the password parameter.
Type: connect to server <var>servername</var> (where <var>servername</var> is the name of the domain controller holding the Domain Naming Master FSMO Role), and then press ENTER. You should receive confirmation that the connection is successfully
established. If an error occurs, verify that the domain controller being used in the connection is available and that the credentials you supplied have administrative permissions on the server.
Type: quit, and then press ENTER. The Metadata Cleanup menu is displayed.
Type: select operation target, and then press ENTER.
Type: list domains, and then press ENTER. A list of domains in the forest is displayed, each with an associated number.
Type: select domain <var>number</var>, and then press ENTER, where <var>number</var> is the number associated with the domain to be removed.
Type: quit, and then press ENTER. The Metadata Cleanup menu is displayed.
Type: remove selected domain, and then press ENTER. You should receive confirmation that the removal was successful. If an error occurs, please refer to the Microsoft Knowledge Base for articles on specific error messages.
Type: quit at each menu to quit the NTDSUTIL tool. You should receive confirmation that the connection disconnected successfully.
Thanks again for all your help.
Regards.
Shaun
Similar Messages
-
Migrated domain replication from FRS to DFSR. Domain query
Hello,
I run 3 domain controllers, all on the same LAN; the PDC is on 2008R2 and the others on 2012
I have today migrated from FRS to DFSR.
Without going through all the errors that dcdiag is now showing, I have a simple query. When our domain was setup, it was named COMPANY ie. not COMPANY.LOCAL. It has all seemed to work OK for ages but in DNS Forward Lookup Zones I see
the following folders:
_msdcs.company
company
company.company
In company.company are just the 3 domain controllers. Can I delete this folder?
Other question at this stage is about DNS forwarders. All LAN PCs point to the 3 x DCs for their DNS servers, and DNS Server is running on all 3 DCs. Should I put my ISPs DNS servers in the forwarders or not, and do I use root hints? (I have 2 ISPs so don't
know which ISP will be used by any PC as the router load balances)
many thanks in advanceHi,
Yes, i think you could delete the folder, if the replication is ok.
You could use your ISPs DNS server as a forwarders.
http://blogs.technet.com/b/tugait/archive/2014/02/11/dns-forwarders-vs-root-hints.aspx
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Hi all,
fase 1
My domain controllers are both Windows 2003 R2 and Windows 2008 and Windows 2008R2. Domain functional level is Windows 2003
fase 2
I upgrade all my domain controllers to Windows 2008R2 and raised the domain functional level to Windows 2008R2.
Now do domain controllers replicate via DFS-R? Have I to make some operation to get all replication works via DFS-R?Hi,
Domain controllers use a special shared folder named SYSVOL to replicate logon scripts and Group Policy object files to other domain controllers. Windows 2000 Server and Windows Server 2003 use File Replication Service (FRS) to replicate SYSVOL, whereas
Windows Server 2008 uses the newer DFS Replication service when in domains that use the Windows Server 2008 domain functional level, and FRS for domains that run older domain functional levels.
To use DFS Replication to replicate the SYSVOL folder, you can either create a new domain that uses the Windows Server 2008 domain functional level, or you can use the procedure that is discussed in this document to upgrade an existing domain and migrate
replication to DFS Replication.
There are many helpful articles for you to refer to to migrate sysvol replication form FSR to DFSR. Please refer to the below link to find a article you want to follow:
http://blogs.technet.com/b/askds/archive/2009/05/01/sysvol-migration-from-frs-to-dfsr-whitepaper-released.aspx
Regards,
Yan Li
Yan Li
TechNet Community Support -
FRS to DFSR Migration and Riverbed RODCs
As I understand it, Riverbed RoDCs are only there to grab session keys from AD in order to optimize SMB traffic. Please correct me if I'm wrong.
I'm in the middle of trying to migrate from FRS to DFSR for SYSVOL, but when moving from the Start to Prepared state, DFSRMig complains that the Riverbed RoDCs aren't following.
C:\Users\adminaccountname>dfsrmig /getmigrationstate
The following Domain Controllers are not in sync with Global state ('Prepared'):
Domain Controller (Local Migration State) - DC Type
===================================================
xxx1a-xxx-xx05 ('Start') - Read-Only DC
xxx1a-xxx-xx03 ('Start') - Read-Only DC
xxx1a-xxx-xx04 ('Start') - Read-Only DC
Pretty sure this is entirely out of my control and there might be a mode of operations on the Riverbed side that needs to be raised along with the functional level of the forest and domain, but I'm getting nothing from the Riverbed documentation that I can
get my hands on. I'm waiting to hear from our networking team.
In the meantime, has anyone had any experience with this?Hi,
Migration from one stable state to another can take an extended period, especially if some of the domain controllers are read-only. In these cases, migration may not reach a consistent state on all domain controllers for a long time after you change the
global migration state.
For more and detail information, please refer to:
Troubleshooting SYSVOL Migration Issues
http://technet.microsoft.com/en-us/library/dd639976(v=ws.10).aspx
Hope this helps.
Regards.
If you have any feedback on our support, please click
here
Vivian Wang -
Migration from 4.7 to ECC 6.0 - Deactivate Update of Classic General Ledger
My client has migrated from 4.7 to ECC 6 version. In the ealier version we had a report developed in FI Module, which was created as a local object.
Now when we are trying to activate the same development in ECC 6.0 and I am trying to use the dynamic selections option of this report, system is throwing an error and taking to this customisation node :
Fin Accounting Global Settings (New)->Tools ->Deactivate Update of Classic General Ledger (GLT0).
Can I know the implications of this option ? Can I deselect the check boxes mentioned in this node ? What could be the consequences ?
Please guide me.
Thanks
RaviHi
GLTO is the table that used to get updated with the totals prior to ECC 6.0 (in 4.7).
After migrating into ECC 6.0 the GLTO is no more valid and the new table FAGLFLEXT replaces GLTO.
SAP also recommends to deactivate the update of GLTO via Fin Accounting Global Settings (New)->Tools ->Deactivate Update of Classic General Ledger (GLT0) once you have establised that the new GL is working correctly.
I dont foresee any consequences of deactiavting GLTO if the new GL has been activated in your new client and you are sure that the NEW GL is working correctly.
Good Luck
Hari
null -
FRS to DFSR migration (Child domain)
Planning on migrating FRS to DFSR for a child domain, I know this is a per domain process.
It shouldn't matter which domain is migrated first, the child or root. But to doublecheck : The plan is to migrate they child domain and the root domain will take a couple of months before it's prepared. Does it matter? Even though i'm pretty certain it
doesn't matter because it's a per domain process, but wanted to verify.> It shouldn't matter which domain is migrated first, the child or root.
No, it doesn't.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
Migrate from G5 Dual 2.5 to 24in Intel iMac
Hi all, could any of the Guru's here give me some advice. I am migrating my set up from a Power Mac G5 Dual 2.5 to an Intel iMac 24in 2.3. What's the best way of bringing my apps, fonts and settings across to the new machine?
I would not use Migration Assistant because you are moving from a PPC to an Intel Mac. Read the following:
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3 or G4 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior (does not work), TechTool Pro (pre-4.5.1 versions do not work), SuperDuper (newest release works), and Drive Genius (untested) may not work properly on Intel-Macs. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode or copying the critical contents to CD and DVD or an external hard drive will work better when moving from PowerPC to Intel Macs.
Basically the instructions you should follow are:
1. Backup your data first. This is vitally important in case you make a mistake or there's some other problem.
2. Connect a Firewire cable between your old Mac and your new Intel Mac.
3. Startup your old Mac in Target Disk Mode.
4. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
4. Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/com.apple.mail.plist (* This is a very important file which contains all email account settings and general mail preferences.)
/Home/Library/Preferences/ copy any preferences needed for third-party applications
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to another forum user for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
I would consider simply reinstalling your third-party applications. All OS X applications are universal binary versions or Intel-only versions. They should not be replaced by your older PPC equivalents. -
Migrate from Server 2003 (no Exchange, single server) to SBS 2011
Are there any Technets or other Microsoft documentation on migrating from Server 2003 (no Exchange, single server) to SBS 2011? I understand it is possible, but I would like confirmation and some documentation before purchasing the appropriate hardware
and licenses.
Thanks,
Doug
Doug OrrHi Doug,
In general, the migration is the similar with migrating process from SBS 2003. In addition, also have main
difference.
“The main difference is that you don’t have to remove the source and that you have to follow the migration
instructions as the SBS migration wizard will not launch.”
You can get above description from following similar thread. Please refer to.
Migrate from Windows Server Standard 2003 (not SBS) to SBS 2011
http://social.technet.microsoft.com/Forums/en-US/68790e41-b833-4e81-8200-63852ab9e196/migrate-from-windows-server-standard-2003-not-sbs-to-sbs-2011?forum=smallbusinessserver
Meanwhile, please refer to the following article. It may be helpful.
Step By Step Guide To Migrating To SBS 2011
http://www.techieshelp.com/step-by-step-guide-to-migrating-to-sbs-2011/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
However, as Robert suggests, would you please confirm specific version of SBS? It may help us to understand
clearly and provide correct information.
Hope this helps.
Best regards,
Justin Gu -
How to migrate from ascii to unicode (MaxDB 7.5)? loadercli: ERR -25347
Hi,
I use MaxDB 7.5.00.26. (Ok, I know that I should switch to 7.6, however, it is not possilble for some customer restriction for now, but should be possible quite soon).
We'd like to migrate a db from ascii to unicode. Based on the infos in the thread "Error at copying database using dumps via loadercli: error -25364" I tried the following:
Export sourcedb
1. Export catalog and data
C:\> loadercli -d db_asc -u dba,dba
loadercli> export db catalog outstream file 'C:\tmp1\20080702a_dbAsc.catalog' ddl
OK
loadercli> export db data outstream file 'C:\tmp1\20080702b_dbAsc.data' pages
OK
loadercli> exit
Import targetdb
1. Create a new empty DB with '_UNICODE=yes'
2. Set 'columncompression' to 'no'
C:\> dbmcli -d db_uni -u dba,dba param_directput columncompression no
ERR
-24979,ERR_XPNOTFOUND: parameter not found
Couldn't find this parameter e.g. in dbmgui (parameters general, extended and support)
3. Import catalog and data
C:\> loadercli -d db_uni -u dba,dba
loadercli> import db catalog instream file 'C:\tmp1\20080702a_dbAsc.catalog' ddl
OK
loadercli> import db data instream file 'C:\tmp1\20080702b_dbAsc.data' pages
ERR -25347
Encoding type of source and target database do not match: source = ASCII, target
= UNICODE.
loadercli> exit
What is wrong? Is a migration from ascii to unicode to be done somehow else?
Can I migrate a db from 7.5.00.26 to 7.6.03.15 in the same way or should it be done in another way.
It would be greate if you point me to a post etc. where these two migrations are explained in detail.
Thanks in advance - kind regards
MichaelHi,
I can neither find "USEUNICODECOLUMNCOMPRESSION" nor "COLUMNCOMPRESSION". Could it be that there do exist from MaxDB version 7.6 on and not in 7.5?
Kind regards,
Michael
The complete parameter list (created by "dbmcli -d db_uni -u dbm,dbm param_directgetall > maxdb_params.txt") is:
OK
KERNELVERSION KERNEL 7.5.0 BUILD 026-123-094-430
INSTANCE_TYPE OLTP
MCOD NO
RESTART_SHUTDOWN MANUAL
_SERVERDB_FOR_SAP YES
_UNICODE YES
DEFAULT_CODE ASCII
DATE_TIME_FORMAT INTERNAL
CONTROLUSERID DBM
CONTROLPASSWORD
MAXLOGVOLUMES 2
MAXDATAVOLUMES 11
LOG_VOLUME_NAME_001 LOG_001
LOG_VOLUME_TYPE_001 F
LOG_VOLUME_SIZE_001 131072
DATA_VOLUME_NAME_0001 DAT_0001
DATA_VOLUME_TYPE_0001 F
DATA_VOLUME_SIZE_0001 262144
DATA_VOLUME_MODE_0001 NORMAL
DATA_VOLUME_GROUPS 1
LOG_BACKUP_TO_PIPE NO
MAXBACKUPDEVS 2
BACKUP_BLOCK_CNT 8
LOG_MIRRORED NO
MAXVOLUMES 14
_MULT_IO_BLOCK_CNT 4
_DELAY_LOGWRITER 0
LOG_IO_QUEUE 50
_RESTART_TIME 600
MAXCPU 1
MAXUSERTASKS 50
_TRANS_RGNS 8
_TAB_RGNS 8
_OMS_REGIONS 0
_OMS_RGNS 25
OMS_HEAP_LIMIT 0
OMS_HEAP_COUNT 1
OMS_HEAP_BLOCKSIZE 10000
OMS_HEAP_THRESHOLD 100
OMS_VERS_THRESHOLD 2097152
HEAP_CHECK_LEVEL 0
_ROW_RGNS 8
_MIN_SERVER_DESC 16
MAXSERVERTASKS 21
_MAXTRANS 292
MAXLOCKS 2920
_LOCK_SUPPLY_BLOCK 100
DEADLOCK_DETECTION 4
SESSION_TIMEOUT 900
OMS_STREAM_TIMEOUT 30
REQUEST_TIMEOUT 5000
_USE_ASYNC_IO YES
_IOPROCS_PER_DEV 1
_IOPROCS_FOR_PRIO 1
_USE_IOPROCS_ONLY NO
_IOPROCS_SWITCH 2
LRU_FOR_SCAN NO
_PAGE_SIZE 8192
_PACKET_SIZE 36864
_MINREPLY_SIZE 4096
_MBLOCK_DATA_SIZE 32768
_MBLOCK_QUAL_SIZE 16384
_MBLOCK_STACK_SIZE 16384
_MBLOCK_STRAT_SIZE 8192
_WORKSTACK_SIZE 8192
_WORKDATA_SIZE 8192
_CAT_CACHE_MINSIZE 262144
CAT_CACHE_SUPPLY 3264
INIT_ALLOCATORSIZE 221184
ALLOW_MULTIPLE_SERVERTASK_UKTS NO
_TASKCLUSTER_01 tw;al;ut;2000*sv,100*bup;10*ev,10*gc;
_TASKCLUSTER_02 ti,100*dw;30000*us;
_TASKCLUSTER_03 compress
_MP_RGN_QUEUE YES
_MP_RGN_DIRTY_READ NO
_MP_RGN_BUSY_WAIT NO
_MP_DISP_LOOPS 1
_MP_DISP_PRIO NO
XP_MP_RGN_LOOP 0
MP_RGN_LOOP 0
_MP_RGN_PRIO NO
MAXRGN_REQUEST 300
_PRIO_BASE_U2U 100
_PRIO_BASE_IOC 80
_PRIO_BASE_RAV 80
_PRIO_BASE_REX 40
_PRIO_BASE_COM 10
_PRIO_FACTOR 80
_DELAY_COMMIT NO
_SVP_1_CONV_FLUSH NO
_MAXGARBAGE_COLL 0
_MAXTASK_STACK 1024
MAX_SERVERTASK_STACK 100
MAX_SPECIALTASK_STACK 100
_DW_IO_AREA_SIZE 50
_DW_IO_AREA_FLUSH 50
FBM_VOLUME_COMPRESSION 50
FBM_VOLUME_BALANCE 10
_FBM_LOW_IO_RATE 10
CACHE_SIZE 10000
_DW_LRU_TAIL_FLUSH 25
XP_DATA_CACHE_RGNS 0
_DATA_CACHE_RGNS 8
XP_CONVERTER_REGIONS 0
CONVERTER_REGIONS 8
XP_MAXPAGER 0
MAXPAGER 11
SEQUENCE_CACHE 1
_IDXFILE_LIST_SIZE 2048
_SERVER_DESC_CACHE 74
_SERVER_CMD_CACHE 22
VOLUMENO_BIT_COUNT 8
OPTIM_MAX_MERGE 500
OPTIM_INV_ONLY YES
OPTIM_CACHE NO
OPTIM_JOIN_FETCH 0
JOIN_SEARCH_LEVEL 0
JOIN_MAXTAB_LEVEL4 16
JOIN_MAXTAB_LEVEL9 5
_READAHEAD_BLOBS 25
RUNDIRECTORY E:\_mp\u_v_dbs\EVERW_T3
_KERNELDIAGFILE knldiag
KERNELDIAGSIZE 800
_EVENTFILE knldiag.evt
_EVENTSIZE 0
_MAXEVENTTASKS 1
_MAXEVENTS 100
_KERNELTRACEFILE knltrace
TRACE_PAGES_TI 2
TRACE_PAGES_GC 0
TRACE_PAGES_LW 5
TRACE_PAGES_PG 3
TRACE_PAGES_US 10
TRACE_PAGES_UT 5
TRACE_PAGES_SV 5
TRACE_PAGES_EV 2
TRACE_PAGES_BUP 0
KERNELTRACESIZE 653
EXTERNAL_DUMP_REQUEST NO
_AK_DUMP_ALLOWED YES
_KERNELDUMPFILE knldump
_RTEDUMPFILE rtedump
_UTILITY_PROTFILE dbm.utl
UTILITY_PROTSIZE 100
_BACKUP_HISTFILE dbm.knl
_BACKUP_MED_DEF dbm.mdf
_MAX_MESSAGE_FILES 0
_EVENT_ALIVE_CYCLE 0
_SHAREDDYNDATA 10280
_SHAREDDYNPOOL 3658
USE_MEM_ENHANCE NO
MEM_ENHANCE_LIMIT 0
__PARAM_CHANGED___ 0
__PARAM_VERIFIED__ 2008-07-02 21:10:19
DIAG_HISTORY_NUM 2
DIAG_HISTORY_PATH E:\_mp\u_v_dbs\EVERW_T3\DIAGHISTORY
_DIAG_SEM 1
SHOW_MAX_STACK_USE NO
LOG_SEGMENT_SIZE 43690
SUPPRESS_CORE YES
FORMATTING_MODE PARALLEL
FORMAT_DATAVOLUME YES
HIRES_TIMER_TYPE CPU
LOAD_BALANCING_CHK 0
LOAD_BALANCING_DIF 10
LOAD_BALANCING_EQ 5
HS_STORAGE_DLL libhsscopy
HS_SYNC_INTERVAL 50
USE_OPEN_DIRECT NO
SYMBOL_DEMANGLING NO
EXPAND_COM_TRACE NO
OPTIMIZE_OPERATOR_JOIN_COSTFUNC YES
OPTIMIZE_JOIN_PARALLEL_SERVERS 0
OPTIMIZE_JOIN_OPERATOR_SORT YES
OPTIMIZE_JOIN_OUTER YES
JOIN_OPERATOR_IMPLEMENTATION YES
JOIN_TABLEBUFFER 128
OPTIMIZE_FETCH_REVERSE YES
SET_VOLUME_LOCK YES
SHAREDSQL NO
SHAREDSQL_EXPECTEDSTATEMENTCOUNT 1500
SHAREDSQL_COMMANDCACHESIZE 32768
MEMORY_ALLOCATION_LIMIT 0
USE_SYSTEM_PAGE_CACHE YES
USE_COROUTINES YES
MIN_RETENTION_TIME 60
MAX_RETENTION_TIME 480
MAX_SINGLE_HASHTABLE_SIZE 512
MAX_HASHTABLE_MEMORY 5120
HASHED_RESULTSET NO
HASHED_RESULTSET_CACHESIZE 262144
AUTO_RECREATE_BAD_INDEXES NO
LOCAL_REDO_LOG_BUFFER_SIZE 0
FORBID_LOAD_BALANCING NO -
Migrating from 8.5 to 10 using VB6
Post Author: Mark1110
CA Forum: General
Hi,
I have a VB 6 project that I want to migrate from crystal reports 8.5 to crystal reports 10. I wasn't given any documentation on CR 10 just the disk. Searching the internet and the crystal reports web site didn't offer any help. Has anyone done this? Here is the code:
sConnect = "ODBC;DSN=" + Server + ";UID=" + UserID + ";PWD=" + Passwd ' + ";DSQ=" + sDSN
With CrystalReport1
.Reset
.ReportFileName = App.Path + "\MM1.rpt"
.Connect = sConnect
.DataFiles(0) = "usp_ol_rpt_mm_letter"
.StoredProcParam(0) = Trim(lblMailingId.Caption)
.StoredProcParam(1) = sBrokerParam
.StoredProcParam(2) = sAddressType ' only for Address Change records
.Formulas(0) = "MAILID1=" + Trim(lblMailingId.Caption)
.Formulas(1) = "LETTERTYPE='" + sLetterType + "'"
'*--- Invoke Sub-Report
.SubreportToChange = "Signature.rpt"
.Connect = sConnect
.SubreportToChange = ""
.WindowTitle = sTitle
.WindowHeight = 450
.WindowWidth = 650
.Destination = crptToWindow
.Action = 1
DoEvents
End With
The program calls a stored procedure passing 3 parameters to it. Any help will be greatly appreciated.MarkHi,
Changing the the network adapter to VMXNET 3 before switch version might cause this issue.
Could you please try the following:
- restore the vm using the working vmx file (with the existing network adapter)
- Upgrade to 10.5 and do a switch version
- Then power off the vm and change the the network adapter to VMXNET 3
Thanks,
Shenbagarajan -
Fast migration from MacBook Pro to MacBook Air
Hello
I have ordered a MacBook Air and will migrate from my battered MBP15 mid-2009. I understand the process and software sides well but I have two hardware questions:
1) Migrating to an SSD
Folk wisdom when migrating to a spinning hard disk is to start with applications because they will install on hte outside of the disk first and will therefore read faster. Obviously SSD not being a spinning device this doesn't apply but are there similar tips to extract maximum performance from an SSD?
2) Using Thunderbolt on the MBA
I cannot use the MBA's ethernet/USB adapter because my USB port is broken on the MBP15. I have looked everywhere for Thunderbolt to Firewire 800 or even 400 adapters and none are for sale (even if Apple claims they are as at teh bottom of this page ...
So I'm stuck using over the air migration... One thing I have thought about can be as follows:
- Start up MBP15 in T mode
- Wire it to a FW800 drive with multiple interfaces
- Hook the drive to the MBA. With a bit of luck both volumes should mount
Anybody has used something similar? Other ideas?
Many thanks
FrançoisThanks for the tips. There is actually a 3rd question...
I was thinking of doing a clean install as I have not done one for almost 10 years! I have issues of general speed, probably lots of junk files and specifically Safari bringing my machine to a complete stop (uninstalling/reinstalling has done nothing). It would obviously be faster to use setup assistant first to install the apps and then do a manual migration of my user files.
How confident should I be that the apps migration will be 'clean' and that a lot of the garbage will be left behind?
Also, what are those Gigs of 'other files' which are neither apps nor user data? - Obviously fonts, but what else? Worth migrating or leave behind (and then search manually)?
I am asking because I did a true clean install last month and it took about a week until I had full confidence that nothing had been missed... -
Migration from BE3000 to BE6000
Hi,
Has anyone done a successful migration from BE3000 to BE6000?
I need the guides.
Please assist.
ThanksHi Valdes,
I haven't come across any Export / Import method for migration from BE3k To BE6k. Even if its tried the whole process may turn out to be too complex without any confirmation about the integrity of database that is exported. However, there is documentation supporting the migration from BE3K to Standalone servers like in the following link
http://www.ciscounitytools.com/Applications/General/COBRAS/Help/COBRAS_Briefcase/COBRAS_Briefcase.htm
HTH
Manish -
Migrating from a BB Curve 9320 to Torch 9810
I am in the process of migrating from a BB Curve to a Torch. How can I transfer my apps for the one to the other?
Hello,
For your AppWorld obtained apps, using the exact same BBID is required on both devices...this transfers all things associated to your BBID account from your old device to your new one, including AppWorld purchase/download records. Refer:
Article ID: KB17625 How to install or transfer previously purchased applications from BlackBerry App World to a BlackBerry smartphone
Do keep in mind that if the developer of an app has not made a version compatible with your new device/OS level, then it will not be available for installation to your new device.
For apps obtained elsewhere, you must look to that "elsewhere" to determine how to transfer your apps to your new device.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Migration from PE 8 (Windows) to PE 11 - What steps?? (MAC)
I am planning to migrate from PE 8 (Windows) to PE 11 (Mac). I will continue to use the PE catalog in PE 11 to organize my library of 16,000+ photos. Although I had considered moving to Aperture for my Digital Asset Manager (in order to more seamlessly work in an Apple environment), I have instead decided to stay with PE since I am familiar with it and happy with its functionality.
I am hoping that this forum can help me: I need to know what steps to follow to perform this migration. (I am a non-technical user. All I know thus far is that I need buy a boxed version or PE11 - NOT download it from the Apple app site - in order to get the cataloging function.) I would like the process to enable me to port both my photos AND my hierarchical keyword tagging structure.
(Some background on why I am asking this question proactively: I was severely burned in a previous upgrade from PE 5 to PE 8 (Windows XP to Windows 7) where ALL of my tagging got lost in the move. This, despite hours of work with the Adobe support team who had me write the keywords into metadata and re-backup, re-port, etc, etc. It was a nightmare of many hours spent. All unsuccessful. I ended up manually re-tagging each of my photos. Needless to say, I do not want to go through that again,)
Thanks in advance for your help. AmyElements Downloader doesn't auto run on a mac. It's set up so that you always have to launch it from organizer.
If you know you won't use iphoto, then it's a good idea to go to the iphoto preferences>General>When a camera is connected, and choose No Application, in which case the card will mount like a drive on your desktop and you can drag the photos from it or launch PSE Downloader, or choose Image Capture, in which case apple's own OS X downloader/scanner utility launches and you can use that, then File>Get Photos>From Files and Folders to bring them into Organizer.
For moving the catalog, the most important thing is to be sure the catalog is okay in windows first, so do go to manage catalogs>repair, and then optimize before backing up. The transfer is very easy when it works. -
Migration from Oracle 7 to 8i or 9i
If a customer has the choice to migrate from 7 to 8i or 9i it seems more efficient to migrate directly to 9i.
Are there any circumstances or reasons for not migrating directly to 9i? (for example stability?).
Thanks for your reply.For my two cents, I'd recommend going from 7 to 9. Why start off with the database already being a release or two old. Also, I believe that 9iR2 is going to be released in the next 6 months, and 9i has been out long enough that any gotcha's should be documented. From my experience, Windows platforms only, 9i is faster and as stable or more so than 8i was. Lots of new features too that are useful. The only reason to go with 8i from my perspective is that it takes less server resources generally (but not significantly more), or if you need specific 3rd party vendor support.
Maybe you are looking for
-
Whenever I try to log into a website (i.e. King of the Web.com,etc.) with my facebook account, a new window will appear behind my current window and when I click on it, it never shows up even when I minimize the current website, how do I get the new
-
IPhone 5s will not sync with itunes on windows 7
I just got the iphone 5s and tired to sync the phone to the itunes. However my wife iphone 5 and ipad mini and sons ipad all sync to itunes. I first updated itunes, then I uninstalled and reinstalled itues and all apple software. I tired to update
-
Hello everybody, I'm planning to import a lot of hi8 footage. Tried using our old hi8 camcorder (connected via S-Video) and a 3 year old Sony miniDV camcorder (can't check which model # right now) in play through mode. The picture was fine on the cam
-
Hi Could u pls explain whats the use of these terminology in SAP and what's the prequisites, configuration setting and how these worked. thanks
-
Roles regarding E-Recruitment are not there in role maintainence
roles regarding E-Recruitment are not there in role maintainence . could anyone tell me why ?