General Warning: could not get server configuration in ldap, using cached c

Guys,
desperately need some help here. I have an installation consisting of 4 mtas that speak to an ldap. I'm currently in the process of adding 2 more. I've added the fifth and there has been no problem whatsoever. I'm now trying to add the sixth. I install the software. There are no error messages as the software installs. It's able to see both the configuration and the user directories. Once this is finished I immediately go and run start-msg and for each component I get the message :
"General Warning: could not get server configuration in ldap, using cached configuration information".
I've tried pinging and tracerouting my ldap server with no problem, I can telnet/ssh to it. My server configuration is almost eaxctly the same as the fifth server. I make no other changes after the installation scripts finishes, yet it can't talk to the ldap.
I running IMS5.2p1 on a Solaris 8 SPARC server.
Thanks
Ali

That error message only comes up when the server can't get to the config ldap server on startup. There's no other time when you see this.
There is either a mis-configuration of your server, or of your ldap, or you just can't get there from here.
Why are you installing 5.2p1, now? 5.2p2 has been out for over a year. ..
6.0 has been out for well over a year, and 6.2 has been out for many months, now. I hate to see you installing old software, when new is available.

Similar Messages

  • Start-msg: could not get server configuration in ldap

    Hello,
    I am trying to get iPlanet Messaging Server 5.2 Patch 1 running, but when I run start-msg
    I get the following error message:
    General Warning: could not get server configuration in ldap, using cached configuration information
    Note: I created this system using a ufsdump and ufsrestore combination on the instance directory.
    Other file systems were not copied over.
    My guess is that something else may be missing?
    I ran ns-slapd first before starting the messaging server.
    Thanks in advance.
    Tim

    Thanks for the response. I have some followup
    questions:
    > I have done this with Messaging Server.
    Several
    things to do:
    1. Go into Console, and change it there. Youneed
    to change hostname and ip for admin server,Directory
    server, and messaging server.
    When I bring up the console, it asks for a user nameThe default user's name is "admin". The password was assigned during installation. You can also use, "cn=Mirectory Manager", but again, the password was assigned on install.
    >
    and password. Well, the admin quit and left no
    documentation, so I don't have any idea on what to
    use. Any ideas?
    >
    2. Edit your mappings file, to reflect the new ip
    address.
    Where is this mappings file?<install directory>/msg-<name of your server>/imta/config
    >
    > 3. Change the setting for "mailhost" for every
    user
    to reflect the new hostname. If you don't dothis,
    nobody will get any mail.>
    I interpret this to mean:
    (1) use db2ldif and then use and editor to do a
    global
    search and replace on the mail hostname.yes
    >
    > It may turn out to be easier to "migrate" your
    data,
    rather than "fix" by changing hostname/ip.
    to migrate:
    install new application on new box, with correct
    hostname/ip
    Unfortunately, I tried this and did not have much
    success. I gave up and went with
    ufsdump/ufsrestore.That's very much the hard way. . .
    >
    > Use MoveUser to migrate users and mailboxes from
    old
    to new, or
    Use imsbackup/imsrestore to move the mailboxes.
    Export the data from ldap in ldif format, then usea
    a text editor to change the mailhost value for all
    the users, and then import that new data to thenew
    directory server
    I think I will have to do this anyways, right.
    Assuming my new box is offline for a while and
    users are still using the old box.You can certainly use imsbackup/imsrestore to move all new mails. . .

  • Could not get server configuration in ldap

    for months my server is ok.
    but, today it happened the following error
    Could not get server configuration in ldap, using cached configuration information
    Please help me. What to do?

    I have verified that ldap is running
    The error log shows like this:
    [26/Sep/2005:16:36:39 -0500] - slapd started.
    [26/Sep/2005:16:38:46 -0500] - cos_cache_build_definition_list: Found n
    initions, cos disabled while waiting for updates
    [26/Sep/2005:16:38:46 -0500] - cos_cache_create: failed to build cache
    [26/Sep/2005:16:38:46 -0500] - cos_cache_getref: no cos cache created
    And the access log:
    [26/Sep/2005:16:38:52 -0500] conn=8 op=0 BIND dn="uid=admi
    =TopologyManagement,o=NetscapeRoot" method=128 version=3
    [26/Sep/2005:16:38:52 -0500] conn=8 op=0 RESULT err=0 tag=
    [26/Sep/2005:16:39:04 -0500] conn=0 op=1 UNBIND
    [26/Sep/2005:16:39:04 -0500] conn=0 op=1 fd=24 closed - U1
    [26/Sep/2005:16:39:04 -0500] conn=1 op=1 UNBIND
    [26/Sep/2005:16:39:04 -0500] conn=1 op=1 fd=25 closed - U1
    [26/Sep/2005:16:39:04 -0500] conn=7 op=1 UNBIND
    [26/Sep/2005:16:39:04 -0500] conn=7 op=1 fd=32 closed - U1
    [26/Sep/2005:16:39:04 -0500] conn=8 op=1 UNBIND
    [26/Sep/2005:16:39:04 -0500] conn=8 op=1 fd=33 closed - U1

  • Could not get exact contents from pdf using adobe acrobat professional

    Hi,
    I am using acrobat professional to extract contents from a pdf into HTML. During extraction of pdf into HTML some contents are getting rendered as images. But with pdf to xml extraction i can get the exact contents. But i need HTML file from pdf. Any suggestions. Thanks in advance.

    You might want to see if you can select the background with the object touchup tool. If so, can you then just delete the selected object. May take a while to go through the document, but if it solves the problem you are ahead. You may be able to select it with JavaScript and repeat the process. My point of using the object touchup tool is that it may not be a background set by Acrobat, but something that is simply labeled as an image from the Acrobat viewpoint.

  • Checking for file conflicts: could not get filesystem information

    When I try to install a new package with pacman 4 I got the following warning just after pacman has done "checking for file conflicts":
    warning: could not get filesystem information for /var/lib/ntp/etc/resolv.conf (deleted): No such file or directory
    After the warning message is printed, the installation continues normally.  This warning message has never shown up before.
    I have ntpd running in a chroot as a non-root user (instructions).
    I am wondering if anyone else gets the same warning message and if this 'problem' can be solved.
    I forgot to say: the file is still there according to ls and is not empty, but the contents differs form the /etc/resolv.conf-file.
    tim@tim-notebook:~$ cat /var/lib/ntp/etc/resolv.conf && echo && cat /etc/resolv.conf
    # Generated by NetworkManager
    # Generated by NetworkManager
    nameserver 192.168.1.1
    Last edited by timothy (2012-01-19 00:15:51)

    I'm not sure how to do that or I do not know exactly what you mean.
    tim@tim-notebook:~$ pkgfile -gs "*etc/resolv.conf"
    core/filesystem
    extra/archboot
    But you probably already knew that.
    Running pacman with the --debug option did not gave me any more clues.  All I know now, is that this message is printed when the moundpoints are examined:
    stderr 'pacman -Syu--debug' output wrote:(...)
    debug: checking possible conflict: /var/lib/
    debug: file is a directory, not a conflict
    debug: checking available disk space
    warning: could not get filesystem information for /var/lib/ntp/etc/resolv.conf (deleted): No such file or directory
    debug: mountpoint: /var/lib/ntp/proc
    debug: mountpoint: /var/lib/ntp/lib
    debug: mountpoint: /var/lib/ntp/etc/services
    debug: mountpoint: /tmp

  • Could not get IOR from Domino Server while provisioning Lotus Notes

    Hi all,
    There are two servers that have OIM installed, development server and test server. From development server, we can
    provision to Lotus Notes just fine. But for test server everytime when
    provision to Lotus Notes. There will be an exception
    NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
    From test server
    I can access the URL http://10.3.100.61:63148/diiop_ior.txt using Internet Explorer
    I can telnet to 10.3.100.61 63148
    I can use connector testing program and it work fine
    All configuration and jar files are the same as development server
    There is no firewall or antivirus running in both systems.
    Both server is virtual server using VMWare.
    OS: Windows2003R2 Enterprise
    DB: Oracle 10gR2 10.2.0.2
    AS: Oracle AS 10g 10.1.3.3.0
    OIM 9.1.0
    Lotus Notes Connector 9.0.4.2
    Thank you.
    Satit
    The error is as below
    =================================================
    INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init
    INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init
    DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Host 10.3.100.61
    DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Port 63148
    DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Admin Pongtape Ungkawanish/Telecom./Central Support/Fin./KK_Bangkok/TH
    DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Certifier OU
    DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Before session
    08/11/11 11:24:26 Running setTimeoutParameters
    08/11/11 11:24:26 Running Connect
    INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession
    INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Non-Secure Mode
    ERROR,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Connection refused to Lotus Notes......
    NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
         at lotus.domino.NotesFactory.requestIORPlain(Unknown Source)
         at lotus.domino.NotesFactory.requestIORUsingArgs(Unknown Source)
         at lotus.domino.NotesFactory.getIOR(Unknown Source)
         at lotus.domino.NotesFactory.createSessionUP(Unknown Source)
         at lotus.domino.NotesFactory.createSession(Unknown Source)
         at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
         at com.thortech.xl.Integration.HostAccess.LotusNotesProvision.connect(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.CONNECT(adpLNCREATEUSER.java:449)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.implementation(adpLNCREATEUSER.java:160)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.retryTasks(Unknown Source)
         at com.thortech.xl.ejb.beans.tcProvisioningOperationsSession.retryTasks(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.SecurityRoleInterceptor.invoke(SecurityRoleInterceptor.java:47)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
         at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
         at tcProvisioningOperations_RemoteProxy_6ocop18.retryTasks(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.NullPointerException
         at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:781)
         at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:669)
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:913)
         ... 45 more
    INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],Unable to connect to the target. Attempting to reconnect after delay of 2000ms.......
    INFO,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession
    INFO,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Non-Secure Mode
    ERROR,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Connection refused to Lotus Notes......
    NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
         at lotus.domino.NotesFactory.requestIORPlain(Unknown Source)
         at lotus.domino.NotesFactory.requestIORUsingArgs(Unknown Source)
         at lotus.domino.NotesFactory.getIOR(Unknown Source)
         at lotus.domino.NotesFactory.createSessionUP(Unknown Source)
         at lotus.domino.NotesFactory.createSession(Unknown Source)
         at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
         at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
         at com.thortech.xl.Integration.HostAccess.LotusNotesProvision.connect(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.CONNECT(adpLNCREATEUSER.java:449)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.implementation(adpLNCREATEUSER.java:160)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.retryTasks(Unknown Source)
         at com.thortech.xl.ejb.beans.tcProvisioningOperationsSession.retryTasks(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.SecurityRoleInterceptor.invoke(SecurityRoleInterceptor.java:47)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
         at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
         at tcProvisioningOperations_RemoteProxy_6ocop18.retryTasks(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.NullPointerException
         at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:781)
         at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:669)
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:913)
         ... 46 more

    check if DIIOP service is turned on at the Lotus Domino side...
    Oleg.

  • Suppress Powershell Warning in agent job "WARNING: Could not obtain SQL Server Service information"

    Hi
    I get this warning running through powershell_ise but through sql agent it just errors out.
    The code does everything it is supposed to and I tried everything to completely resolve the warning to no avail.
    How do I supress it so sql agent wont error out running powershell code?
    Thanks!
    WARNING: Could not obtain SQL Server Service information. An attempt to connect to WMI on 'server_name' failed with the following error: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
    Warning only present when it connects to remote servers, it doesn't produce it for local server. And it does get all info from the remote servers.
    Paula

    Hi paulata,
    According to your description, when you run powershell scripts about  the remote machine
     in SQL Server Agent job, the warning error will occur. “The common error message is Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)).” This suggests that your credentials aren't sufficient for accessing the
    remote system. If you have an account that has sufficient permissions for the query, there's a simple workaround for this problem in the form of PowerShell's Get-Credential command and the script's Credential parameter. I recommend you check if your account
    has permission on remote machine and it can execute the powershell scripts.
    In addition, if you want to run query statement on the remote machine , I recommend you create Linked Server, then do some related operations. There is a similar issue about access denied, you can review the following article.
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/157f536d-6716-4547-bdb4-9e3c8451cb95/sql-agent-service-account-permissions-sql-server-2008?forum=sqlgetstarted
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

    Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

    We aren't Apple, just users like you volunteering to help other users with problems. Threatening to go to Samsung doesn't mean anything to us. What troubleshooting have you tried so far?

  • Getting Accessing iTunes Store..   Never able to access it.  Also try to update 10.6.1.7 itunes and i get could not contact server??? thoughts please

    I am getting Accessing iTunes Store.. in the midlle pane with the status bar    Never able to access it.  iTunes does not lockup but cannot access itunes. Also tried to update current version 10.6.1.7 of itunes and i get could not contact server??? thoughts please.  PC specs.  Windows Vista home 64 bit OS. IE 9

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 &amp; above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Javawebserver: Warning: could not perform iFS server warmup.

    Hi all,
    a customer tries to start iFS 1.0.8.3 on
    Win NT 4.0 with 'ifsstart'.
    The Java Web Server displays a dialog with
    the following error:
    "javawebserver: Warning: could not perform iFS server warmup."
    The error_log has this line several times:
    ClassLoaderFactory Error: Can not find Class : error [ ClassNotFoundException ]
    This happens since installing patch 1.0.8.3.
    There is a Doc on Metalink describing exactly
    the same problem: DocID 144687.999.
    (Just search for 'javawebserver' , Header line is 'Unable to Run Webui'.)
    Is there a solution for this problem already?
    Thanks,
    -Einar
    null

    Having exactly the same problems here ... there is also another newer thread on this issue, that hasn4t been answered yet.
    This is my first time using Oracle, and the support isn4t exactly encouraging :)

  • Gifs not getting served when defaultSetvlet is configured

    Hi,
              I have configured my WLAS 4.5.1 to have a defaultServlet with the
              following lines:
              weblogic.httpd.register.myservlet=com.domain.MyServlet
              weblogic.httpd.defaultServlet=myservlet
              I then find that .gifs in the generated HTML are not getting served to
              my browser. It appears that the GET requests for the gifs go to my
              default servlet which doesn't handle the request.
              Is there a way to configure WLAS so that the default servlet gets all
              requests except for .gifs?
              Or is there another solution?
              -mike-
              

    gif is registered as a MIME type in weblogic.properties (out-of-box). Please
              check weblogic.httpd.mimeType.image/gif=gif in your weblogic.properties
              file.
              Cheers - Wei
              Michael Walsh <[email protected]> wrote in message
              news:[email protected]..
              > I just answered my own question. In addition to the lines below, I added
              > the following to my weblogic.properties file and the .gifs are now being
              > served:
              >
              > weblogic.httpd.register.*.gif=weblogic.servlet.FileServlet
              >
              >
              > Michael Walsh wrote:
              >
              > > Hi,
              > >
              > > I have configured my WLAS 4.5.1 to have a defaultServlet with the
              > > following lines:
              > >
              > > weblogic.httpd.register.myservlet=com.domain.MyServlet
              > > weblogic.httpd.defaultServlet=myservlet
              > >
              > > I then find that .gifs in the generated HTML are not getting served to
              > > my browser. It appears that the GET requests for the gifs go to my
              > > default servlet which doesn't handle the request.
              > >
              > > Is there a way to configure WLAS so that the default servlet gets all
              > > requests except for .gifs?
              > >
              > > Or is there another solution?
              > >
              > > -mike-
              >
              

  • On startup I get a warning "Could not initialize the application' security component...", click OK Firefox starts but I cannot navigate to any URL but home.

    Click the Firefox 4 icon. A window opens with the warning:
    "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features"
    (There are no read/write restrictions on my Applications folder and plenty of room on the hard drive.)
    Click OK and Firefox opens at the home page, but I cannot navigate to any other URL or link. I had the same behavior when I tried FireFox 3)

    First, use a specific [[Managing profiles|profile]] for Firefox 4.0 Beta and keep your current one for Firefox 3.6 to prevent interferences between both versions.
    Then, see [[Could not initialize the browser security component]].

  • RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA'

    Hi, All
    the system is PI 7.0 EHP1 oraclei Win2003 server, I configured SLD but I run RZ70, having error "RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA' ". I know there are lot of tread about this error, but none of themsolve my problem. all JCO, RFC connections and SDL DATA supplier(VA) seem OK. error message in SM21 is "Could not send SLD data"
    detail from SM21
    The system could not send the data that has been collected automatical
    for the System Landscape Directory (SLD). Check whether the gateway
    configured in transaction RZ70 has been started and whether the SLD
    bridge has been registered with this gateway.
    You can use transaction SM59 to check this in the sending system for t
    implemented RFC destinations. The RFC destinations have the standard
    names "SLD_UC" for Unicode sending systems and "SLD_NUC" for non-Unico
    sending systems. If a different RFC destination has been entered in
    RZ70, check this destination instead.
    You can use the Gateway Monitor to check the target gateways. In ABAP
    systems, this monitor is started with transaction SMGW, or you can use
    the external SAP program "gwmon". Check whether the specified gateway
    has an active registration.
    OF COURSE I checked  RFC of  SLD_UC and SMGW
    any different ideas
    Regards
    ABH

    Hi
    Please check the following notes are implemented
    Note 906454                           
    Note 907729
    You may be aware but if you are not --->RZ70 creates the required SLD* RFCs during runtime - therefore if you have defined these RFCs manually first using the same namespace you can get RFC conflicts which result in a failed submission    
    Please also check the user in the RFC is known to both systems and has required authorization to write to SLD
    Generally with SLD you have to install or select a suitable gateway to handle incoming data supply traffic
    Also the gateway you are using has be known to SLD and reflected in RZ70 - i.e these defintions have to be the same
    It is also recommended to delete all references to SLD_* RFCs in data supplier and target SLD
    after a failed submission attempt to allow RZ70 to recreate these consistently once the above has been checked
    Best wishes
    Stuart

  • Dispatcher yellow,J2EE status info unavailable,Could not get file from DB

    Hello Experts,
    I have successfully installed a ECC 6.0 server-ABAP +JAVA  system (DB2 v9.5 FP4 windows server 2008-x64 bit).
    Kernel: 700 , Patch: 185 ; SP level : rel 700 , level 17
    I upgraded JSPM sucessfully from 14 to 17.Then i was trying to apply JAVA sp's one by one using single sp option JSPM tool.
    I DEPLOYED the first sp component sucesfully but after that the next component gave warning in JSPM check that SDM is not started.
    I checked MMC.Dispatcher was YELLOW and J2EE status info unavailable. Cannot use JCMON to start SDM..option 20 gives error--cannot access shared memory
    I already tried Notes   784568 and 997510
    Relevant logs:-
    jvm_bootstrap.out
    =================================================================================================
    Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
    com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
    Attempt to fully materialize lob data that is too large for the JVM.
    Disable data source property "fullyMaterializeLobData" for locator-based lob implementation. ERRORCODE=-4499, SQLSTATE=null ERRORCODE=-4499, SQLSTATE=null
    Exception occurred:
    com.sap.engine.bootstrap.SynchronizationException: Unable to synchronize native files for instance [ID140026]!
    ==============================================================================================
    dev_jcontrol
    =============================================================================================
    Thr 4360] *** ERROR => JsfOpenShm: FtInit(SESSION, 2, 176) failed (got (rc = 0 operation successful), expected (rc = 8 already initialized)) [jsfxxshm.c   913]
    [Thr 4360] *** ERROR => Can't create shared memory segment 69 (rc = 1) [jcntrxx.c    1749]
    [Thr 4360] *** ERROR => Can't initialize JControl Administration [jcntrxx.c    273]
    [Thr 4360] JControlCloseProgram: started (exitcode = -1)
    [Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SESSION) failed (rc = 6 invalid argument) [jsfxxshm.c   1243]
    [Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(ALIAS) failed (rc = 6 invalid argument) [jsfxxshm.c   1250]
    [Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SERVICE) failed (rc = 6 invalid argument) [jsfxxshm.c   1257]
    =================================================================================================
    log_bootstrap_ID0140026.0
    ==========================================================================================
    Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
    com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
    ============================================================================================
    Eagerly looking forward to a solution from you experts..
    Thanks,
    Rakesh

    Hi,
    I am facing the same related problem with ECC 6.0.
    My dispatcher started it is showing yellow-  dialog queue standstill, J2EE status info unavailable
    after some time dispatcher has stopped.
    Please check my below trace file for dispatcher:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      03
    sid        DEV
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    114
    intno      20050900
    make:      multithreaded, Unicode, optimized
    pid        13108
    Fri Nov 27 02:31:55 2009
    kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (03 13108) [dpxxdisp.c   1239]
         shared lib "dw_xml.dll" version 114 successfully loaded
         shared lib "dw_xtc.dll" version 114 successfully loaded
         shared lib "dw_stl.dll" version 114 successfully loaded
         shared lib "dw_gui.dll" version 114 successfully loaded
         shared lib "dw_mdm.dll" version 114 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3903
    Fri Nov 27 02:31:59 2009
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5361]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >sapdev_DEV_03                           <
    DpShMCreate: sizeof(wp_adm)          15800     (1436)
    DpShMCreate: sizeof(tm_adm)          4232256     (21056)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    DpShMCreate: sizeof(comm_adm)          528064     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1536)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 08290040, size: 4889440)
    DpShMCreate: allocated sys_adm at 08290040
    DpShMCreate: allocated wp_adm at 08292090
    DpShMCreate: allocated tm_adm_list at 08295E48
    DpShMCreate: allocated tm_adm at 08295E78
    DpShMCreate: allocated wp_ca_adm at 0869F2B8
    DpShMCreate: allocated appc_ca_adm at 086A5078
    DpShMCreate: allocated comm_adm at 086A6FB8
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 08727E78
    DpShMCreate: allocated gw_adm at 08727EB8
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 08727EE8
    DpShMCreate: allocated wall_adm at 08727EF0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    Fri Nov 27 02:32:00 2009
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 1023 blocks reserved for free list.
    ES initialized.
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 13356
      argv[0] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
      argv[1] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
      argv[2] = pf=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=2919
      argv[5] = -DSAPSYSTEM=03
      argv[6] = -DSAPSYSTEMNAME=DEV
      argv[7] = -DSAPMYNAME=sapdev_DEV_03
      argv[8] = -DSAPPROFILE=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1629]
    ***LOG Q0K=> DpMsAttach, mscon ( sapdev.visu.com) [dpxxdisp.c   11753]
    DpStartStopMsg: send start message (myname is >sapdev_DEV_03                           <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Fri Nov 27 02:32:01 2009
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpJ2eeLogin: j2ee state = CONNECTED
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 114
    Release check o.K.
    Fri Nov 27 02:32:05 2009
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1468
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2927) [nixxi.cpp    4248]
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=13356)
    ERROR => DpProcKill: kill failed [dpntdisp.c   371]
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    Fri Nov 27 02:32:40 2009
    ERROR => W0 (pid 13364) died [dpxxdisp.c   14441]
    ERROR => W1 (pid 13372) died [dpxxdisp.c   14441]
    ERROR => W2 (pid 13380) died [dpxxdisp.c   14441]
    ERROR => W3 (pid 13388) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W4 (pid 13396) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W5 (pid 13404) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W6 (pid 13412) died [dpxxdisp.c   14441]
    ERROR => W7 (pid 13420) died [dpxxdisp.c   14441]
    ERROR => W8 (pid 13428) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W9 (pid 13436) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W10 (pid 13444) died [dpxxdisp.c   14441]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:50 2009
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Thu Nov 26 21:02:50 2009
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA    13364 Ended         no      1   0        0                                                                         
    1 DIA    13372 Ended         no      1   0        0                                                                         
    2 DIA    13380 Ended         no      1   0        0                                                                         
    3 DIA    13388 Ended         no      1   0        0                                                                         
    4 UPD    13396 Ended         no      1   0        0                                                                         
    5 ENQ    13404 Ended         no      1   0        0                                                                         
    6 BTC    13412 Ended         no      1   0        0                                                                         
    7 BTC    13420 Ended         no      1   0        0                                                                         
    8 BTC    13428 Ended         no      1   0        0                                                                         
    9 SPO    13436 Ended         no      1   0        0                                                                         
    10 UP2    13444 Ended         no      1   0        0                                                                         
    Dispatcher Queue Statistics               Thu Nov 26 21:02:50 2009
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    2
    2000
    6
    6
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          12
    wake_evt_udp_now     0
    wake events           total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    since last update     total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    Dump of tm_adm structure:               Thu Nov 26 21:02:50 2009
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Thu Nov 26 21:02:50 2009
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:55 2009
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >sapdev_DEV_03                           < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (13340) (SOFT_KILL)
    Stop icman
    killing process (13348) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:13340  HANDLE:1564)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:56 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:13340  HANDLE:1564)
    wait for end of icman
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:57 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:58 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Nov 27 02:32:59 2009
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:13348  HANDLE:1568)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1593
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Please help me to start my SAP MMC.
    Thanks

  • Java.lang.Exception: Could not get name for DC project

    Hello Experts,
    We have a code which is downloaded from SVN repository.
    I have imported the code from my desktop into NWDS and when I try to deploy it throws,
    java.lang.Exception: Could not get name for DC project
    I have referred few threads in SCN and solution suggested is to change the workspace and create a new DC & copy the _comp from old DC.
    I tried the above solution but there are lot of build errors as we have few RFC models and it is throwing build errors for missing model reference.
    Kindly help me on how to fix the error.
    Thanks, Swarnaprakash

    Dear Swarnaprakash,
    The Web Dynpro DCs Import C:\----\user\.dtc\LocalDevelopment\DCs\sap.com\test and
    the related package for DC  is missing once check it after try to import.
    Depending on which Java compiler preferences are set, you may see some
    warnings in the "Task" view after importing the project. If the severity level for problems of type "Unused imports" (set in Preferences – Java – Compiler) has the value "Warning", the compiler will issue a warning for unused import references. Ignore these warnings!
    Still You getting means delete your .metadata before take the backup.after open the NWDS again it will set new configurations in your system.
    Thanks & Regards,
    Durga Rao.

Maybe you are looking for

  • Closing Stock For Each Period in Inventory Infocube

    Hello Guru's, Can we have closing stock of each material  for entire period in Invnetory Infocube ? or through any logic or transformation routine can we create this keyfigure  at infocube level ? I know that to get Closing Stock  ( Opening Stock + G

  • Calendars and events are missing from iCal

    What happened was I closed the lid of my MacBook Pro to put it to sleep. When I opened the lid to wake it, the screen was dark, like it was between 0 brightness and the lowest brightness setting. It also was not responding to trackpad or keyboard inp

  • HT2731 your request is temporarily unable to be processed. Please try again later

    Let's see if anyone has any ideas here. When I went to create an account on iTunes, I can get all the way to the credit card screen and then when we click "done" and pop up window comes up and says "your request is temporarily unable to be processed.

  • Greek and latin on text item

    Hello everybody! I'm trying to write different types of languages on a single text item, like greek and latin. The type of font of the text item only accepts or latin or greek, but not latin and greek together. Please, if anyone knows how do I get th

  • Package name for client proxy

    hi All ,       I am new to SAP .I am doing a PROXY> XI> FILE scenario .After generating Proxy when i try to save the proxy       It is prompting  to specify the Package name and the prefix ,Can some one explain me the process how i should create