General weirdness
Hi all,
I've just noticed some general weirdness when booting my machine.
1. The volume controls have disappeared from my top bar. When I set it in the prefs to show, initially it does, with the slider to the top, but I have no audio. I just turned on itunes to test it, and the volume icon disappeared again.
2. The Top Sites icon in the Safari toolbar has disappeared. I reset Safari, but no icon.
We may have deeper issues, but try this first...
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions...
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/<yourname>/Library/Preferences/com.apple.systemuiserver.plist
/Users/<yourname>/Library/Preferences/ByHost/com.apple.systemuiserver.xxx.plist
where 'xxx' is a 12 digit (hexadecimal) numeric string.
This will reset your Menu Bar to the default, you'll need to go through System Preferences to reset the ones you need. (If they are already checked, uncheck them first and then recheck them).
Similar Messages
-
General Weirdness going on in 10.4.7 - Any ideas?
I've got all sorts of weird little problems going on right now.
Basically it all adds up to me having to log out of my machine or shutdown every few days.
I have no idea what's going on.
Here's an excerpt from my console log...
2006-09-08 12:46:16.289 System Preferences[5672] hardwareCheckThread got an exception name:NSInternalInconsistencyException reason:couldn't fork
2006-09-08 12:46:32.531 System Preferences[5672] * NSThread: ignoring exception 'couldn't fork' that raised during delayed perform of target 0x1573dd00 and selector '_initiateDMConnection'
Disk Utility started.
2006-09-08 12:47:07.730 Disk Utility[5676] couldn't fork
2006-09-08 12:47:35.918 Disk Utility[5676] couldn't fork
When I started up Disk Utility - no window came up...
Backup fails too - and then is fixed by a logout/restart - Here's it's logs...
2006-09-08 12:42:30.898 Backup[5664] unable to gzip event log /Users/guentherm/Library/Logs/Backup/Events/BD265DE3-562D-4B2C-B4E8-11075E7236C B/EA7D3E1B-12F1-445E-85BB-7D32CB9CC00D.log
2006-09-08 12:53:46.780 Backup[5691] gzip failed: exception caught : couldn't fork
2006-09-08 12:53:46.799 Backup[5691] unable to gzip event log /Users/guentherm/Library/Logs/Backup/Events/BD265DE3-562D-4B2C-B4E8-11075E7236C B/00D85575-E900-429C-9688-D2E8A8003F05.log
When I try to empty my trash I get an error dialog satting "The operation cannot be completed because you do not have sufficient privileges for some of the items."
Again - once I log off or restart the problem goes away - and returns after a few days.
If I'm not running Activity Monitor already and I try to start it up I get an error box saying that there are too many processes or it just bombs out completely...like it did just now... Here's what the console log says...
2006-09-08 13:00:18.342 Console[5667] * NSRunLoop ignoring exception 'couldn't fork' that raised during posting of delayed perform with target 34dc90 and selector 'reload'
2006-09-08 13:00:18.762 Console[5667] Exception raised during posting of notification. Ignored. exception: couldn't fork
2006-09-08 13:00:19.771 Console[5667] Exception raised during posting of notification. Ignored. exception: couldn't fork
2006-09-08 13:00:19.981 Console[5667] * NSRunLoop ignoring exception 'couldn't fork' that raised during posting of delayed perform with target 34dc90 and selector 'reload'
2006-09-08 13:00:20.762 Console[5667] Exception raised during posting of notification. Ignored. exception: couldn't fork
The biggest commonality I see in all this is the error 'couldn't fork'. All of this has been going on for about a couple of months now and continued doing so even after I did a system wipe a restore.
All I use this laptop for is WoW, e-mail, writing papers, web browsing and iTunes. Other than WoW (for which I admitedly need to buy more RAM) there's nothing super taxing going on with the system.Never got an answer on this - problem just went away and didn't re-occur
-
After many, many years of Firefox being my default browser, it's now become unusable.
About 6 weeks ago, the BBC iPlayer radio stopped working correctly.
Now the browser randomly goes partially or wholly black.
Also, when I close the browser (with multiple tabs open), when reloaded, it displays a single page. Closing & reloading again brings up the "well this is embarrassing" screen with the tabs listed below.
I tried the "refresh" thing - made no difference. What have you done to it?
PS: Typing this in IE.What computer and Firefox are you using?
Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift ''(Mac Options)'' >''' key, and then starting Firefox. Is the problem still there? -
Recently my Flash has been acting generally weird. I cannot view certain flash videos, although youtube works, and Flash is not allowing me to set websites store data, making it impossible to use many flash-dependent websites. When I attempt to fix this with the Flash global settings manager, it simply does not save my choices, and does not even let me click the "Allow third party Flash content to store data on your computer", which is what I need to fix it. Also, even if I make sure I am signed in, every time I navigate to the Global Settings Security page, it seems to log me out. Any help with allowing Flash to save my settings, or why videos aren't working in Chrome?
Try the following
close all browser windows and open Windows Explorer
in the address bar type %appdata%\Adobe
delete the 'Flash Player' folder in there
in the address bar type %appdata%\Macromedia
delete the 'Flash Player' folder in there
Now try again to change any Flash Player settings. -
Solaris 10 x86 cdrw trouble. Gnome and command line problems writing.
I'm experiencing general weirdness trying to write CD's and DVD's using a new internal DVD-RW device -- It's a Sony NEC AD 7220 A CD / DVD RW drive on a Solaris 10 x86 AMD system. I have searched far and wide for other threads of similar instances but no one has posted an issue like the one I'm having.
I have a Sony Optiarc AD 7220 A CD-RW on a x86 AMD Athalon 1.6 ghz based server with 2 GB RAM.
The DVD-RW drive gets detected by BIOS (Phoenix TrustedCore 2.3) and reads disks fine. I installed Solaris 10.08 from DVD using this DVD-RW drive.
However, trying to write to new blank media does not work properly, (effectively at all).
I've tried different brands of brands of blank CD's and CD-R and CD+R (have not tried using CD-RW disks yet). Ditto with DVD's - tried DVD-R and DVD+R's.
1. Inside the Solaris 10 GUI (Gnome, a.k.a. Java Desktop), when I put in a blank CD-R, a dialog box "Format Media...?" pops up. If I click "Ok" it formats the blank CD and closes the session, CD has been written to and is ruined.
2. I open a terminal window, as root, and put in a blank CD. "mkisofs r /home/foo 2>/dev/null | cdrw i p 1" will write a directory tree OK, but if I go back into gnome GUI and open and close the CD tray, again, up pops the "Format Media..." dialog box instead of the CD appearing on the desktop. If I restart vold (svcadm restart volfs) then open and close the CD tray, voila, the contents appear on desktop as CD icon.
3. When I try to write to a DVD-R: "cdrw -i /local/iso_image" It always fails with: Write Track 1....Failed. after a few minutes. It did in fact write part of the .iso but bails out with a failure.
I've tried various other write commands (specifying the device ID, speed, so on and so forth) and command line switch options (following the rules of course) and it seems to me to be more than a syntax / media issue. However if it is I would like to know. I did see a similar CDRW device on the HCL for OpenSolaris with a 'reported to work' rating. That was for a Optiarc AD-5200A, which is going away thus my company has chosen to use the AD 7220A in speciality racks we build and deliver to the U.S. Navy.
I really need to get a handle on this CD-RW device issue and decide if a different brand / model is what it's going to take to solve this and move on to producing and delivering these systems in working conditions.Sony systems are often very particular about what CD's and DVD's they'll take. I have several Sony systems that I use for video work and they'll read almost anything but they'll only write to DVD RW. They also don't like cheap brand CD's and DVD's. Be sure to try both CD RW and DVD RW before doing anything else. Because of the requirement for DVD RW, they won't take fast speed (16x) DVD's, just 4x. If all of this turns out to be the case, you may want to go with a different manufacturer for the drive, DVD +RW 4x aren't always easy to find in the store.
-
2008 Mac Pro, Lion, and a flaky mouse?
For some reason, shortly after upgrading to Mac OS X Lion, my 2008 Mac Pro has developed intermitent problems with my Logitech Desktop Wave mouse. The problem seems primarily associated with the left mouse button and includes problems selecting files and highlighting text, problems dragging, random double-clicks, and general weirdness.
Here's what I've done so far:
Replaced the mouse batteries
Updated to the latest version of the Logitech Control Center (3.5.1-23)
Checked the system preferences for Mouse, Universal Access, and the Logitech Control Center
Reset the PRAM
Restarted the MacPro
Nothing works. I even substituted my existing Logitech mouse for another one and the problem remains. This has gotten to the point where it's driving me absolutely batty. The only thing that I haven't checked is the PRAM battery inside my MacPro, which is about 4 years old, but I'm not having any problems with the date and time resetting, which is usually indicative of a failing PRAM battery. Please help me save my sanity.
Thanks,
KellyAt idle, kernel_task is running at .3-.5%, but disconnecting and reconnecting the DVI connectors didn't have any effect for me.
Plus, I'm not really having issues with jumpiness, as the user's post describes. My mouse problem has more to do with not being able to click and drag windows on the first attempt, the inability to click and drag lines of text, random double clicks instead of single clicks, and stuff like that.
However, if kernel_task is suppose to idle at 1-2%, that's clealry not happening. -
Nieoczekiwany b∏àd: Error opening resource fork of Dict -35
Anybody have any idea what the following error message during load of CS3 apps (I get it in ID, PS, and AI) might mean?
Nieoczekiwany b∏àd: Error opening resource fork of Dict -35
I was recently forced to upgrade to Leopard, and ever since then I have gotten this error, but only on this machine (first gen MacBook Pro 1.83 GHz 15"), but not on an iMac I installed it on to try to to identify the problem's source.
I did a clean system install and then Migration Assistant to bring in my apps and user accounts. But I since completely uninstalled CS3 from my machine (and even did a manual search to get rid of Adobe debris on the hard drive), but it is still there upon a reinstall. If I could figure out what this weird mix of Polish and English means and what error code -35 is, I might be able to fix the problem. There is some other general weirdness as well, like text export from InDesign failing or producing weird results like looping through three paragraphs multiple times and leaving everything else in a story out (or exporting NOTHING), and I wonder if these are related.
(For what it's worth, I tried running CS3 in a new user account and got the identical error!)
Best,
ArleThanks for the suggestion, but I'm hoping to get more specific on the error to resolve it without the many hours of work needed to rebuilt a user account from data only and reinstall every application. Chances are that a single file somewhere is corrupt or need to have something done (like a change in permissions).
Frankly, I'd rather live with a modal error box popping up when CS3 applications start because rebuilding from the ground up is an even bigger pain...
I realize that you're telling me the "right thing" to do, but it is something like telling someone with indigestion to get their stomach pumped in terms of the inconvenience it will cause relative to the actual problem.
-Arle -
Hi there....
Had a interesting situation develop with FCS 5 and our Quad G5 system, all footage on a external FW800 drive, latest OS and 8Gig of RAM....
Editing a DV25 project (NTSC-DV 720x480) project sequence[s] lost all video (bin and sequences), audio however was retained. I closed the project reopened, same... shut the system down, booted after 30 minutes, the same -- few hours later, video re-apppeared in ALL project sequence clips (note: ALL video in this project is DV25)
This has never happened before. Anyone else experience this?
Thanks
David HealyThat is strange.
FWIW, after our similar problem we did what we usually do when confronted with general weirdness.
Trashed FCP Preferences with FCP Rescue.
Gave the drives a going over with Disk Warrior (directories were very fragmented)
Deleted render files and re-rendered.
I still don't know exactly why it happened but it's running fine now. If I had to guess I'd say Disk Warrior was what fixed it up. I think it's an indispensable utility for FCP drives. Often helps, never hurts and has saved many a butt more than once. If you don't have it you should get it... well worth the investment.
Good Luck
rh -
Directory damage and fallout -- looking for root cause
One of the G5s (2x 2.7GHz, 4.5 GB RAM, 250 GB HD) I support at work started exhibiting erratic behavior yesterday (spinning ball, slow app launch, general weirdness) and I told the user to reboot. He did, and the grey pinwheel screen came up and it sat there spinning for a while and then went wind-tunnel with black screen.
I powered it back on and went into single-user mode and did fsck -fy and got a host of errors. Not thinking it wouldn't fix things, I don't remember what the initial errors were, but there were a lot of them. Missing files maybe?
Anyhow, it couldn't repair everything. The errors I then got were:
Incorrect number of thread records (4, 228)
and
Invalid volume file count
I booted with TechTool 4.x and it found errors as well but could not repair. I then bought DiskWarrior and booted up another Mac and plugged the G5 in via firewire disk mode. I rebuild the directory and rebooted the G5 into single user mode and fsck gave me a clean bill of health.
I rebooted again and it passed through the grey screen and "hung" on the blue screen prior to login for about 30 mins before I lost patience and rebooted in verbose mode.
In verbose mode, everything seemed to go well until I got the following message every three seconds...
...waiting for IFC
At that point, I left it to do its thing and came back this morning to the login window.
I then rebooted the machine again and it "hung" on the blue screen again.
Right now I am imaging the internal drive over to another drive. I am just going to rebuild the machine now, but what I really want to know is what is this IFC service that it was waiting for?
(Unfortunately the rebuild will take a while since it has both Adobe CS2 AND Final Cut Pro -- two long installs that require multiple DVD swaps)
--MikeMichael,
Disk repair utilities, when they work, will return your file system to a "consistent state," but they cannot restore data that may have been lost as a result of the disk error. In other words, even after a successful repair, you may still have damaged files.
If the damaged files happen to be critical system files, the machine "won't go." Period.
The original cause could be one or more of several things. If the user that "rebooted" the machine had to perform a forced shutdown, doing so would only have aggravated the issue, causing further errors and damage. The original cause could have been a bad block on the drive, or it could simply have been a "tired" file system.
If you want to get ahead of the game somewhat, I would recommend that you "zero" the drive (with the drive selected in Disk Utility, not the "volume" on the drive). This will map out any potential bad blocks, thereby eliminating the possible need to go through this again in the near future.
Also, be aware that any "image" of the volume in question will, itself, remain damaged. I would recommend that you attempt to recover only user data from this backup; do not attempt to "restore" it using Disk Utility.
Scott -
High process count - is this normal? and what's up with 10.6.6?
Among other aspects of the general weirdness I've noticed occurring on my machine (which seems to have started around when I installed 10.6.6), I've noticed that the PID numbers in Activity Monitor have recently skyrocketed. I used to go for two weeks or a month before seeing PID numbers in the 30-50k range (and even that is high in comparison to a year or two ago), but now they're much higher, much sooner.
For example: it's been 2 days and an hour since my last reboot (according to uptime), and I'm now showing processes in the mid 99k range. I have several background apps installed, but still—99 thousand processes come and gone in just over two days? Seriously? Given what I remember as normal over the past couple of years, this seems insanely high.
Again, given this and the other weirdness I've had (mainly sluggishness), seemingly since around when I installed 10.6.6, it makes me wonder what is going on. I've got 4 GB of RAM and over 50 GB of free HD space; the computer uses only about 1 GB of that following a fresh boot (Safari seems to be the biggest RAM hog, partially because of extensions, so I try to quit it fairly regularly). Is 10.6.6 a buggy release or something?
Any thoughts on what might be going on (mainly for the PID thing but also the general weirdness) would be greatly appreciated. Thanks!
Background apps installed: Sophos AntiVirus, TechTool Pro, Dropbox, FlashFrozen, MenuPop, OpenDNS Updater, Growl, MagiCal, SIMBL. Most of these, notably Sophos and SIMBL, were installed before this sluggishness started.Thanks. I read through the Console logs, and I only found a few things that seemed to repeat. A lot of entries similar to this one:
Feb 28 08:57:45 [computer-name] [0x0-0x17d17d].com.apple.Safari[83590]: objc
[83590]: Class SUStandardVersionComparator is implemented in both /Library/
Application Support/SIMBL/Plugins/Safari AdBlocker.bundle/Contents/MacOS/../
Frameworks/Sparkle.framework/Versions/A/Sparkle and /Library/Application
Support/SIMBL/Plugins/Safari Cookies.bundle/Contents/MacOS/../Frameworks/
Sparkle.framework/Versions/A/Sparkle. One of the two will be used. Which one
is undefined.
And this one:
Mar 1 14:11:53 [computer-name] [0x0-0x2c82c8].com.apple.Safari[53329]: objc
[53329]: Class SUAppcastItem is implemented in both /Library/Application
Support/SIMBL/Plugins/Safari AdBlocker.bundle/Contents/MacOS/../Frameworks/
Sparkle.framework/Versions/A/Sparkle and /Users/me/Library/Internet Plug-Ins/
ClickToFlash.webplugin/Contents/Frameworks/Sparkle.framework/Sparkle. One of
the two will be used. Which one is undefined.
Many of these:
Feb 28 23:40:28 [computer-name] com.apple.WebKit.PluginAgent[8588]: 2011-02-28
23:40:28.764 WebKitPluginHost[11565:2c113] * __NSAutoreleaseNoPool(): Object
0xa08cd808 of class NSCFBoolean autoreleased with no pool in place - just
leaking
And a small handful of these:
Mar 5 20:35:12 [computer-name] loginwindow[30]: in pamsmauthenticate(): Failed to
determine Kerberos principal name.
Although I think the WebKit entries would seem to explain the VM churning I've had lately (I don't think I mentioned that earlier because it seems unrelated; turning off Safari extensions makes it go away)—so I'm playing with which extensions I have turned on and off to try to figure that out—those messages don't seem to suggest something which is (re)starting a ton of processes. I read through that page you referred me to and searched the logs for those terms (like "exited with code", "throttling respawn", etc.), but nothing came up.
I checked the launchagents folders, as the page suggested, and in my personal folder, I have a launch agent for gconsync (Google Contact Sync), and in the /Library folder, I have ones for GoogleSoftwareUpdateAgent, Micromat's TechtoolProAgent, and SIMBL. Other than the duplicated functionality messages related to SIMBL, none of the others show excessive messages (or many at all, for that matter).
I know what you're saying about the lack of viruses, but I must admit that I'm surprised to hear that people are having trouble with Sophos. I'm familiar with the behavior of anti-virus software on Windows (performance killer), and I remember being not so thrilled with NAV 8 and 10, which I had installed years and years ago on an old machine, so I thought I'd try out Sophos, be unimpressed, and get rid of it. On the contrary, it has been the most unobtrusive, least bothersome anti-virus app I've ever seen. I haven't felt a performance drag from it since I installed it (it's been several months), and haven't seen anything weird that I could specifically link to Sophos. I decided to search the logs for "sophos" to see if something bad was happening behind the scenes, but all that came up was a handful of installer entries for virus updates.
I have a nagging hunch that maaaaybe this has something to do with a Safari extension gone wild. I find it hard to believe that extensions would be capable of intentionally spawning processes, but what about unintentionally somehow? Hmm...
Anyway, any thoughts? Much appreciated! -
I think I pushed my MBP too far.
I think I may have finally pushed my newly purchased Macbook Pro to its thermal limit..
I wasn't running CoreDuoTemp, but I'm convinced the sucker hit 100 degrees C and almost imploded on itself..
So here I am, playing some World of Warcraft for a good 4-5 hours. MBP is wicked hot after this time (it usually gets hot, but not this much), all of a sudden I start hearing whirring and clicking noises from the right hand side (where the Right fan is, along with the GPU).
Finally the noises get louder and louder, so I quickly turn off the laptop in the hopes to prevent damage.
Let the MBP cool for a few minutes, turn it back on, it boots into OSX but spinning beach balls everywhere, network dropping like mad, just general weird stuff, plus the clicking noises and wwhirring noises are still there.
I shut it off for a good 2-3 hours and turned it back on. Everything "seems" to work, however, there is a whirring noise on the right side where the fan/gpu is (although not as pronounced).
I don't dare start anything intensive.. This thing was so hot that the keys on the keyboard started heating up to a point where they were uncomfortable. Pressing down on keys such as F, J, etc was like pressing the tip of your finger onto scolding pavement in the summer heat.
Besides that, guess I have to call Apple tomorrow.. I've also noticed two other things since I've had my MBP.. 1) The screen doesn't seem to close correctly. Bottom right corner of the screen assembley (where the screw is) is quite scratched from that part rubbing on the corner of the base of the MBP. 2) When I put my Serial Number in the Apple site, it tells me that my laptop has a Glossy screen (I ordered Matte). I can't confirm this as I haven't owned a laptop before and haven't used this one outside. I can't say I notice a glare on it however.
Anyway, I hope applecare is quick with it, until then it's on my Windows box I work.Sorry to hear about yoru ahrdware problems. Hopefully apple will figur eotu what ever may be wrong - however it kind of sounds to me that it may jsut be one of teh fans bearings for the noise.. Hopefully that's all ti is and they will get it back to you quickly.
I do, obviosuly, believe it got pretty toasty to say the least, however i doubt the cpu got to above 100, as at 100 C the machien will shut down due to the thermal sensors for the cpu reaching thier limit, I beleive its 100, i may be wrong, however.
As for the serial sayign glossy - mine too says the same, and its matte. When i brought it into an apple place for getting the thermal paste redone (friend is the tech) he put the # in and all as needed jsut incase anuything wereto happen, to say ti was serviced, and it brought it up saying glossy. I guess something just got confused while the ordering took place. i'm sure it makes no diffrence at all. -
My wife's computer won't see me as "online"
My wife has an AIM account and is using a Macbook Pro. I have a Macbook Pro and am using Mac.com. I can see my wife as being online, but she shows me being offline. I can initiate and connect to my wife via video chat, but she cannot because her computer shows me as being offline. What am I missing?
Hi,
If you can see her as On-line can you contact her ?
With any Chat Window (with you) open she should go to the Buddies Menu.
In here is the Add Buddy item which when a live chat window is Open allows you to Add the Buddy by name.
One thing to do is to mouse over your Off-line Buddy so she can read the Screen Name (presuming she has you in the Address Book).
She can then check spelling and type of account.
I would say that in the past two weeks there does seem to be general weirdness with AIM or names that can log into AIM being a bit odd at times.
10:08 PM Tuesday; August 25, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
Getting weird error: "General Photoshop error occurred".
Hi Guys,
I am trying to get the info(font, color, alignment etc.) of text kind layer in Photoshop CC. My script is as follows,
var textLayer = activeDocument.activeLayer.textItem;
var fontName = textLayer.font;
try{
var textColor = "R: " + textLayer.color.rgb.red + " G: " + textLayer.color.rgb.green + " B: " + textLayer.color.rgb.blue;
catch(e){alert(e);}
try
var textAlignment = textLayer.justification.toString();
catch(e){alert(e);}
On setting the color value R - 0, B - 0 and G - 0 or alignment 'Left' and create a text layer after this. I encountered an error
"Error: General Photshop error occurred. This functionality may not be available in this version of Photoshop.
- <no additional information available> "
If I set some other color value and other alignment and create the text and get its info, script works fine.
Or If I change the values and revert it back to 'Left' alignment and R-0, B-0 and G-0 then I am able to get the values with the above script.
I get this error at first time only and after that script works fine
I also run this script with CS5 version, Its working fine there. But I don't know why I am getting this error in CC version.
Am I doing something wrong here or Is it some issue with Photoshop CC.
Any help would be appriciated.
Thanks..Is your text layer using a layer style? If so, this routine should find the font and color in use.
var fontsInUse = [];
var colorsInUse = [];
if ( documents.length > 0 ) {
GetFontUsage( activeDocument.layers, fontsInUse );
alert( fontsInUse );
GetColorUsage( activeDocument.layers, colorsInUse );
alert( colorsInUse );
} else {
alert( "Please open a document." );
function GetFontUsage( l, f ) {
for ( var i = 0; i < l.length; i++ ) {
if ( l[i].typename == "LayerSet" ) {
GetFontUsage( l[i].layers, f );
} else if ( l[i].typename == "ArtLayer" && l[i].kind == LayerKind.TEXT ) {
try {
f.push( l[i].textItem.font );
catch(e) {
f.push( GetFontUsageFromDescriptor( l[i] ) );
function GetColorUsage( l, f ) {
for ( var i = 0; i < l.length; i++ ) {
if ( l[i].typename == "LayerSet" ) {
GetFontUsage( l[i].layers, f );
} else if ( l[i].typename == "ArtLayer" && l[i].kind == LayerKind.TEXT ) {
try {
f.push( Math.round(l[i].textItem.color.rgb.red) + ":" +
Math.round(l[i].textItem.color.rgb.green) + ":" +
Math.round(l[i].textItem.color.rgb.blue));
catch(e) {
f.push( GetColorUsageFromDescriptor( l[i] ) );
// text layer probably has a layer style
// we will try to select the layer
// pull the descriptor
// and see if we can find a font
function GetFontUsageFromDescriptor( l ) {
var layerFontName = "";
var lastActive = activeDocument.activeLayer;
activeDocument.activeLayer = l;
var ktextKeyStr = stringIDToTypeID("textKey");
var ref = new ActionReference();
ref.putProperty(charIDToTypeID('Prpr'), ktextKeyStr);
ref.putEnumerated(charIDToTypeID('Lyr '), charIDToTypeID('Ordn'),
charIDToTypeID('Trgt'));
var desc = executeActionGet(ref);
if ( desc.hasKey( ktextKeyStr ) ) {
var descText = desc.getObjectValue( ktextKeyStr );
var kparagraphStyleRangeStr = stringIDToTypeID( "paragraphStyleRange" );
if ( descText.hasKey( kparagraphStyleRangeStr ) ) {
var paraList = descText.getList( kparagraphStyleRangeStr );
var kparagraphStyleStr = stringIDToTypeID("paragraphStyle");
var paraDesc = paraList.getObjectValue( 0 );
if ( paraDesc.hasKey( kparagraphStyleStr ) ) {
var paraStyle = paraDesc.getObjectValue( kparagraphStyleStr );
var kdefaultStyleStr = stringIDToTypeID("defaultStyle");
if ( paraStyle.hasKey( kdefaultStyleStr ) ) {
var defStyle = paraStyle.getObjectValue( kdefaultStyleStr );
var kfontPostScriptNameStr = stringIDToTypeID("fontPostScriptName");
if ( defStyle.hasKey( kfontPostScriptNameStr ) ) {
layerFontName = defStyle.getString( kfontPostScriptNameStr );
activeDocument.activeLayer = lastActive;
return layerFontName;
// text layer probably has a layer style
// we will try to select the layer
// pull the descriptor
// and see if we can find a color
function GetColorUsageFromDescriptor( l ) {
var layerColor = "";
var lastActive = activeDocument.activeLayer;
activeDocument.activeLayer = l;
var ktextKeyStr = stringIDToTypeID("textKey");
var ref = new ActionReference();
ref.putProperty(charIDToTypeID('Prpr'), ktextKeyStr);
ref.putEnumerated(charIDToTypeID('Lyr '), charIDToTypeID('Ordn'),
charIDToTypeID('Trgt'));
var desc = executeActionGet(ref);
if ( desc.hasKey( ktextKeyStr ) ) {
var descText = desc.getObjectValue( ktextKeyStr );
var kparagraphStyleRangeStr = stringIDToTypeID( "paragraphStyleRange" );
if ( descText.hasKey( kparagraphStyleRangeStr ) ) {
var paraList = descText.getList( kparagraphStyleRangeStr );
var kparagraphStyleStr = stringIDToTypeID("paragraphStyle");
var paraDesc = paraList.getObjectValue( 0 );
if ( paraDesc.hasKey( kparagraphStyleStr ) ) {
var paraStyle = paraDesc.getObjectValue( kparagraphStyleStr );
var kdefaultStyleStr = stringIDToTypeID("defaultStyle");
if ( paraStyle.hasKey( kdefaultStyleStr ) ) {
var defStyle = paraStyle.getObjectValue( kdefaultStyleStr );
var kColorStr = stringIDToTypeID("color");
if ( defStyle.hasKey( kColorStr ) ) {
var colorDesc = defStyle.getObjectValue( kColorStr );
layerColor += Math.round( colorDesc.getInteger( stringIDToTypeID("red" ) ) ) + ":";
layerColor += Math.round( colorDesc.getInteger( stringIDToTypeID("green" ) ) ) + ":";
layerColor += Math.round( colorDesc.getInteger( stringIDToTypeID("blue" ) ) );
activeDocument.activeLayer = lastActive;
return layerColor; -
MacbookPro Mid 2012 13" weird crash window (sometimes during gameplay)
Hey guys...
strange error occurs even don't really know how to describe, I'll try but the video will describe it better, of course.
Configuration:
Macbook Pro 13" Mid 2012
8gb RAM (originally 4gb, self upgrade to 8gb (Corsair Vengeance SoDimm CL9 PC3-12800 8GB 1600MHz DD3-RAM Kit))
Intel HD 4000
Mountain Lion
Error:
Reproducible: Yes! (Many times), by playing a game (simple games like Virtual City Playground, or some real games like Starcraft II)
Description:
Playing a game or sometimes without running any real heavy applications/ games my MBP totally freaks out. Flickering on the screen and a weird repeating warn-signal or whatever appears so that I can't do anything than turning it completely off by using the Power-Button. After a restart Macbook Spotlight indicates again and it seems like the TimeMachine Update needs a lot more time to run, to analyse where it stopped or whatever. Please take a look on the Vid, to see the error. Applications and everything seem to be up-to-date. For me it seems like a graphic-card issue, but can't remember having this problem using Lion (but had Lion just a week or two, so not a lot of experience with it).
http://youtu.be/MQX4UZaPYXQ
Console since StarCraftII start to simulate the error:
11.09.12 22:07:03,861 StarCraft II[2606]: Current process is NOT running as Admin: -60007
11.09.12 22:07:04,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=2615[Blizzard Launche] clearing CS_VALID
11.09.12 22:07:22,082 Dock[279]: no information back from LS about running process
11.09.12 22:07:22,342 Agent[2608]: objc[2608]: Object 0x20c75b0 of class __NSCFData autoreleased with no pool in place - just leaking - break on objc_autoreleaseNoPool() to debug
11.09.12 22:07:24,526 WindowServer[91]: Display 0x42730c0 captured by conn 0x1339b
11.09.12 22:07:44,544 coreservicesd[63]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=6594
11.09.12 22:14:45,000 bootlog[0]: BOOT_TIME 1347423285 0
11.09.12 22:15:03,000 kernel[0]: PMAP: PCID enabled
11.09.12 22:15:03,000 kernel[0]: PMAP: Supervisor Mode Execute Protection enabled
11.09.12 22:15:03,000 kernel[0]: Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
11.09.12 22:15:03,000 kernel[0]: vm_page_bootstrap: 1993035 free pages and 87733 wired pages
11.09.12 22:15:03,000 kernel[0]: kext submap [0xffffff7f8073e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800073e000]
11.09.12 22:15:03,000 kernel[0]: zone leak detection enabled
11.09.12 22:15:03,000 kernel[0]: standard timeslicing quantum is 10000 us
11.09.12 22:15:03,000 kernel[0]: standard background quantum is 2500 us
11.09.12 22:15:03,000 kernel[0]: mig_table_max_displ = 74
11.09.12 22:15:03,000 kernel[0]: TSC Deadline Timer supported and enabled
11.09.12 22:15:03,000 kernel[0]: corecrypto kext started!
11.09.12 22:15:03,000 kernel[0]: Running kernel space in FIPS MODE
11.09.12 22:15:03,000 kernel[0]: Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
11.09.12 22:15:03,000 kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
11.09.12 22:15:03,000 kernel[0]: corecrypto.kext FIPS integrity POST test passed!
11.09.12 22:15:03,000 kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
11.09.12 22:15:03,000 kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
11.09.12 22:15:03,000 kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
11.09.12 22:15:03,000 kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
11.09.12 22:15:03,000 kernel[0]: corecrypto.kext FIPS SHA POST test passed!
11.09.12 22:15:03,000 kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
11.09.12 22:15:03,000 kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
11.09.12 22:15:03,000 kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
11.09.12 22:15:03,000 kernel[0]: corecrypto.kext FIPS POST passed!
11.09.12 22:15:03,000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
11.09.12 22:15:03,000 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
11.09.12 22:15:03,000 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
11.09.12 22:15:03,000 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
11.09.12 22:15:03,000 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
11.09.12 22:15:03,000 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
11.09.12 22:15:03,000 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
11.09.12 22:15:03,000 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
11.09.12 22:15:03,000 kernel[0]: calling mpo_policy_init for TMSafetyNet
11.09.12 22:15:03,000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
11.09.12 22:15:03,000 kernel[0]: calling mpo_policy_init for Sandbox
11.09.12 22:15:03,000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
11.09.12 22:15:03,000 kernel[0]: calling mpo_policy_init for Quarantine
11.09.12 22:15:03,000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
11.09.12 22:15:03,000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
11.09.12 22:15:03,000 kernel[0]: The Regents of the University of California. All rights reserved.
11.09.12 22:15:03,000 kernel[0]: MAC Framework successfully initialized
11.09.12 22:15:03,000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
11.09.12 22:15:03,000 kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
11.09.12 22:15:03,000 kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
11.09.12 22:15:03,000 kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 0046
11.09.12 22:15:03,000 kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
11.09.12 22:15:03,000 kernel[0]: PFM64 (36 cpu) 0xf10000000, 0xf0000000
11.09.12 22:15:03,000 kernel[0]: [ PCI configuration begin ]
11.09.12 22:15:03,000 kernel[0]: console relocated to 0xf10000000
11.09.12 22:15:03,000 kernel[0]: PCI configuration changed (bridge=15 device=4 cardbus=0)
11.09.12 22:15:03,000 kernel[0]: [ PCI configuration end, bridges 11 devices 15 ]
11.09.12 22:15:03,000 kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
11.09.12 22:15:03,000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
11.09.12 22:15:03,000 kernel[0]: rooting via boot-uuid from /chosen: E18B8BC2-6344-3067-A4CE-FC695124E956
11.09.12 22:15:03,000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
11.09.12 22:15:03,000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
11.09.12 22:15:03,000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
11.09.12 22:15:03,000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
11.09.12 22:15:03,000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
11.09.12 22:15:03,000 kernel[0]: AppleIntelCPUPowerManagementClient: ready
11.09.12 22:15:03,000 kernel[0]: BTCOEXIST off
11.09.12 22:15:03,000 kernel[0]: BRCM tunables:
11.09.12 22:15:03,000 kernel[0]: pullmode[1] txringsize[ 256] reapmin[ 32] reapcount[ 128]
11.09.12 22:15:03,000 kernel[0]: highWaterMark: VO[ 192] VI[ 192] BE[ 192] BK[ 192]
11.09.12 22:15:03,000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/TOSHIBA MK5065GSXF Media/IOGUIDPartitionScheme/Customer@2
11.09.12 22:15:03,000 kernel[0]: BSD root: disk0s2, major 1, minor 2
11.09.12 22:15:03,000 kernel[0]: jnl: unknown-dev: replay_journal: from: 17126912 to: 19440640 (joffset 0xe8a000)
11.09.12 22:15:03,000 kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 003ee1fffe10e820; max speed s800.
11.09.12 22:15:03,000 kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
11.09.12 22:15:03,000 kernel[0]: jnl: unknown-dev: journal replay done.
11.09.12 22:15:03,000 kernel[0]: Kernel is LP64
11.09.12 22:15:03,000 kernel[0]: hfs: Removed 34 orphaned / unlinked files and 907 directories
11.09.12 22:14:48,919 com.apple.launchd[1]: *** launchd[1] has started up. ***
11.09.12 22:14:48,919 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
11.09.12 22:15:01,075 com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
11.09.12 22:15:06,107 hidd[47]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
11.09.12 22:15:06,110 fseventsd[48]: event logs in /.fseventsd out of sync with volume. destroying old logs. (2685 21 2757)
11.09.12 22:15:06,111 fseventsd[48]: log dir: /.fseventsd getting new uuid: E41FE4C6-F5B9-4468-97D2-76653665DDEB
11.09.12 22:15:11,000 kernel[0]: Waiting for DSMOS...
11.09.12 22:15:11,000 kernel[0]: macx_swapon SUCCESS
11.09.12 22:15:11,000 kernel[0]: BCM5701Enet: Ethernet address 40:6c:8f:41:93:a9
11.09.12 22:15:11,000 kernel[0]: AirPort_Brcm4331: Ethernet address 7c:d1:c3:73:05:32
11.09.12 22:15:11,000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
11.09.12 22:15:11,000 kernel[0]: IO80211Interface::efiNVRAMPublished():
11.09.12 22:15:12,003 mDNSResponder[40]: mDNSResponder mDNSResponder-379.27.1 (Aug 1 2012 20:12:04) starting OSXVers 12
11.09.12 22:15:12,117 appleeventsd[53]: main: Starting up
11.09.12 22:15:12,130 hidd[47]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
11.09.12 22:15:12,155 airportd[69]: _processDLILEvent: en1 attached (down)
11.09.12 22:15:12,222 com.apple.usbmuxd[26]: usbmuxd-268.5 on Apr 5 2012 at 15:33:48, running 64 bit
11.09.12 22:15:12,228 coreservicesd[63]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
11.09.12 22:15:12,000 kernel[0]: createVirtIf(): ifRole = 1
11.09.12 22:15:12,000 kernel[0]: in func createVirtualInterface ifRole = 1
11.09.12 22:15:12,000 kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff8016a11800
11.09.12 22:15:12,000 kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
11.09.12 22:15:12,000 kernel[0]: Created virtif 0xffffff8016a11800 p2p0
11.09.12 22:15:12,000 kernel[0]: IOBluetoothUSBDFU::probe
11.09.12 22:15:12,000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821D FirmwareVersion - 0x0086
11.09.12 22:15:12,000 kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
11.09.12 22:15:12,000 kernel[0]: Previous Shutdown Cause: 3
11.09.12 22:15:12,000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
11.09.12 22:15:12,000 kernel[0]: [IOBluetoothHCIController][start] -- completed
11.09.12 22:15:12,000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
11.09.12 22:15:12,000 kernel[0]: DSMOS has arrived
11.09.12 22:15:12,794 WindowServer[76]: Server is starting up
11.09.12 22:15:13,035 WindowServer[76]: Session 256 retained (2 references)
11.09.12 22:15:13,035 WindowServer[76]: Session 256 released (1 references)
11.09.12 22:15:13,044 WindowServer[76]: Session 256 retained (2 references)
11.09.12 22:15:13,045 WindowServer[76]: init_page_flip: page flip mode is on
11.09.12 22:15:13,126 mds[39]: (Normal) FMW: FMW 0 0
11.09.12 22:15:13,146 WindowServer[76]: mux_initialize: kAGCGetMuxState (kMuxControl, kMuxControl_switchingMode) failed (0xe0000001)
11.09.12 22:15:13,146 WindowServer[76]: mux_initialize: Mode is safe
11.09.12 22:15:13,163 WindowServer[76]: GLCompositor enabled for tile size [256 x 256]
11.09.12 22:15:13,163 WindowServer[76]: CGXGLInitMipMap: mip map mode is on
11.09.12 22:15:13,183 WindowServer[76]: WSMachineUsesNewStyleMirroring: false
11.09.12 22:15:13,183 WindowServer[76]: Display 0x042730c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 10 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009cc300000000042730c0
11.09.12 22:15:13,184 WindowServer[76]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
11.09.12 22:15:13,184 WindowServer[76]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
11.09.12 22:15:13,184 WindowServer[76]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
11.09.12 22:15:13,193 WindowServer[76]: Created shield window 0x5 for display 0x042730c0
11.09.12 22:15:13,193 WindowServer[76]: Created shield window 0x6 for display 0x003f003f
11.09.12 22:15:13,193 WindowServer[76]: Created shield window 0x7 for display 0x003f003e
11.09.12 22:15:13,193 WindowServer[76]: Created shield window 0x8 for display 0x003f003d
11.09.12 22:15:13,200 WindowServer[76]: Display 0x042730c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 10 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009cc300000000042730c0
11.09.12 22:15:13,200 WindowServer[76]: Display 0x003f003f: GL mask 0x8; bounds (2304, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
11.09.12 22:15:13,200 WindowServer[76]: Display 0x003f003e: GL mask 0x4; bounds (2305, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
11.09.12 22:15:13,200 WindowServer[76]: Display 0x003f003d: GL mask 0x2; bounds (2306, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
11.09.12 22:15:13,201 WindowServer[76]: CGXPerformInitialDisplayConfiguration
11.09.12 22:15:13,201 WindowServer[76]: Display 0x042730c0: MappedDisplay Unit 0; Vendor 0x610 Model 0x9cc3 S/N 0 Dimensions 11.26 x 7.05; online enabled built-in, Bounds (0,0)[1280 x 800], Rotation 0, Resolution 1
11.09.12 22:15:13,201 WindowServer[76]: Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
11.09.12 22:15:13,201 WindowServer[76]: Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2305,0)[1 x 1], Rotation 0, Resolution 1
11.09.12 22:15:13,201 WindowServer[76]: Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2306,0)[1 x 1], Rotation 0, Resolution 1
11.09.12 22:15:13,201 WindowServer[76]: CGXMuxBoot: Unexpected boot switch return value (0xe00002c7)
11.09.12 22:15:13,253 launchctl[80]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.teamviewer.teamviewer.plist
11.09.12 22:15:13,253 launchctl[80]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.teamviewer.teamviewer_desktop.plist
11.09.12 22:15:13,287 WindowServer[76]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000000f, accelerator 0x00003e17, unit 0, caps QEX|QGL|MIPMAP, vram 580 MB
11.09.12 22:15:13,287 WindowServer[76]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000000f, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
11.09.12 22:15:13,297 WindowServer[76]: Unable to open IOHIDSystem (e00002bd)
11.09.12 22:15:13,000 kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
11.09.12 22:15:14,188 mds[39]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
11.09.12 22:15:14,188 mds[39]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
11.09.12 22:15:14,236 mds[39]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
11.09.12 22:15:14,340 launchctl[85]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.teamviewer.teamviewer.plist
11.09.12 22:15:14,340 launchctl[85]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.teamviewer.teamviewer_desktop.plist
11.09.12 22:15:14,000 kernel[0]: nspace-handler-set-snapshot-time: 1347423316
11.09.12 22:15:14,543 com.apple.SecurityServer[15]: Session 100000 created
11.09.12 22:15:15,000 kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
11.09.12 22:15:15,000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
11.09.12 22:15:15,132 configd[18]: network changed.
11.09.12 22:15:15,133 configd[18]: setting hostname to "MBP-Simon.local"
11.09.12 22:15:15,194 WindowServer[76]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
11.09.12 22:15:16,291 WindowServer[76]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042730c0 device: 0x10f80e320 isBackBuffered: 1 numComp: 3 numDisp: 3
11.09.12 22:15:27,002 com.apple.SecurityServer[15]: Entering service
11.09.12 22:15:27,076 loginwindow[43]: Login Window Application Started
11.09.12 22:15:27,113 apsd[59]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
11.09.12 22:15:27,128 apsd[59]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
11.09.12 22:15:27,132 WindowServer[90]: Server is starting up
11.09.12 22:15:27,134 WindowServer[90]: Session 256 retained (2 references)
11.09.12 22:15:27,134 WindowServer[90]: Session 256 released (1 references)
11.09.12 22:15:27,142 WindowServer[90]: Session 256 retained (2 references)
11.09.12 22:15:27,143 UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
11.09.12 22:15:27,143 WindowServer[90]: init_page_flip: page flip mode is on
11.09.12 22:15:27,148 awacsd[57]: Starting awacsd connectivity-77 (Jun 20 2012 15:40:49)
11.09.12 22:15:27,165 awacsd[57]: InnerStore CopyAllZones: no info in Dynamic Store
11.09.12 22:15:27,169 WindowServer[90]: mux_initialize: kAGCGetMuxState (kMuxControl, kMuxControl_switchingMode) failed (0xe0000001)
11.09.12 22:15:27,169 WindowServer[90]: mux_initialize: Mode is safe
11.09.12 22:15:27,186 WindowServer[90]: GLCompositor enabled for tile size [256 x 256]
11.09.12 22:15:27,186 WindowServer[90]: CGXGLInitMipMap: mip map mode is on
11.09.12 22:15:27,196 netbiosd[86]: Unable to start NetBIOS name service:
11.09.12 22:15:27,199 WindowServer[90]: WSMachineUsesNewStyleMirroring: false
11.09.12 22:15:27,199 WindowServer[90]: Display 0x042730c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 10 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009cc300000000042730c0
11.09.12 22:15:27,199 WindowServer[90]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
11.09.12 22:15:27,199 WindowServer[90]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
11.09.12 22:15:27,200 WindowServer[90]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
11.09.12 22:15:27,211 WindowServer[90]: Created shield window 0x4 for display 0x042730c0
11.09.12 22:15:27,211 WindowServer[90]: Created shield window 0x5 for display 0x003f003f
11.09.12 22:15:27,211 WindowServer[90]: Created shield window 0x6 for display 0x003f003e
11.09.12 22:15:27,211 WindowServer[90]: Created shield window 0x7 for display 0x003f003d
11.09.12 22:15:27,224 WindowServer[90]: Display 0x042730c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 10 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009cc300000000042730c0
11.09.12 22:15:27,224 WindowServer[90]: Display 0x003f003f: GL mask 0x8; bounds (2304, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
11.09.12 22:15:27,224 WindowServer[90]: Display 0x003f003e: GL mask 0x4; bounds (2305, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
11.09.12 22:15:27,225 WindowServer[90]: Display 0x003f003d: GL mask 0x2; bounds (2306, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
11.09.12 22:15:27,225 WindowServer[90]: CGXPerformInitialDisplayConfiguration
11.09.12 22:15:27,225 WindowServer[90]: Display 0x042730c0: MappedDisplay Unit 0; Vendor 0x610 Model 0x9cc3 S/N 0 Dimensions 11.26 x 7.05; online enabled built-in, Bounds (0,0)[1280 x 800], Rotation 0, Resolution 1
11.09.12 22:15:27,225 WindowServer[90]: Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
11.09.12 22:15:27,225 WindowServer[90]: Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2305,0)[1 x 1], Rotation 0, Resolution 1
11.09.12 22:15:27,225 WindowServer[90]: Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2306,0)[1 x 1], Rotation 0, Resolution 1
11.09.12 22:15:27,225 WindowServer[90]: CGXMuxBoot: Unexpected boot switch return value (0xe00002c7)
11.09.12 22:15:27,233 WindowServer[90]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000000f, accelerator 0x00003d17, unit 0, caps QEX|QGL|MIPMAP, vram 580 MB
11.09.12 22:15:27,233 WindowServer[90]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000000f, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
11.09.12 22:15:27,242 loginwindow[43]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
11.09.12 22:15:27,301 digest-service[100]: label: default
11.09.12 22:15:27,301 digest-service[100]: dbname: od:/Local/Default
11.09.12 22:15:27,301 digest-service[100]: mkey_file: /var/db/krb5kdc/m-key
11.09.12 22:15:27,301 digest-service[100]: acl_file: /var/db/krb5kdc/kadmind.acl
11.09.12 22:15:27,303 digest-service[100]: digest-request: uid=0
11.09.12 22:15:27,320 aosnotifyd[102]: bootstrap_look_up failed (44e)
11.09.12 22:15:27,323 rpcsvchost[111]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
11.09.12 22:15:27,325 digest-service[100]: digest-request: init request
11.09.12 22:15:27,329 digest-service[100]: digest-request: init return domain: BUILTIN server: MBP-SIMON
11.09.12 22:15:29,213 WindowServer[90]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
11.09.12 22:15:30,241 WindowServer[90]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042730c0 device: 0x10c13b320 isBackBuffered: 1 numComp: 3 numDisp: 3
11.09.12 22:15:32,202 systemkeychain[68]: done file: /var/run/systemkeychaincheck.done
11.09.12 22:15:32,221 configd[18]: network changed: DNS*
11.09.12 22:15:32,000 kernel[0]: MacAuthEvent en1 Auth result for: 20:76:00:07:c6:dc MAC AUTH succeeded
11.09.12 22:15:32,000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
11.09.12 22:15:32,000 kernel[0]: AirPort: Link Up on en1
11.09.12 22:15:32,000 kernel[0]: en1: BSSID changed to 20:76:00:07:c6:dc
11.09.12 22:15:32,000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
11.09.12 22:15:32,000 kernel[0]: AirPort: RSN handshake complete on en1
11.09.12 22:15:35,074 configd[18]: network changed: DNS*
11.09.12 22:15:35,078 mDNSResponder[40]: D2D_IPC: Loaded
11.09.12 22:15:35,078 mDNSResponder[40]: D2DInitialize succeeded
11.09.12 22:15:35,082 awacsd[57]: Configuring lazy AWACS client: 1366256562.p04.members.btmm.icloud.com.
11.09.12 22:15:39,210 mDNSResponder[40]: Adding registration domain 1366256562.members.btmm.icloud.com.
11.09.12 22:15:44,287 awacsd[57]: KV HTTP 0
11.09.12 22:15:46,630 DMProxy[87]: CGSShutdownServerConnections: Detaching application from window server
11.09.12 22:15:46,630 DMProxy[87]: CGSDisplayServerShutdown: Detaching display subsystem from window server
11.09.12 22:15:46,647 WindowServer[90]: Created shield window 0x8 for display 0x042730c0
11.09.12 22:15:46,648 WindowServer[90]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
11.09.12 22:15:46,665 WindowServer[90]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
11.09.12 22:15:47,075 configd[18]: network changed: v4(en1+:192.168.1.74) DNS+ Proxy+ SMB
11.09.12 22:15:47,100 UserEventAgent[11]: Captive: en1: Not probing 'TELUS7187' (protected network)
11.09.12 22:15:47,104 configd[18]: network changed: v4(en1!:192.168.1.74) DNS Proxy SMB
11.09.12 22:15:47,896 ntpd[95]: proto: precision = 1.000 usec
11.09.12 22:15:47,911 WindowServer[90]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
11.09.12 22:15:47,912 WindowServer[90]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
11.09.12 22:15:47,918 launchctl[174]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.teamviewer.teamviewer.plist
11.09.12 22:15:47,918 launchctl[174]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.teamviewer.teamviewer_desktop.plist
11.09.12 22:15:47,947 launchctl[174]: com.apple.findmymacmessenger: Already loaded
11.09.12 22:15:47,973 com.apple.SecurityServer[15]: Session 100005 created
11.09.12 22:15:48,002 hidd[47]: CGSShutdownServerConnections: Detaching application from window server
11.09.12 22:15:48,002 hidd[47]: CGSDisplayServerShutdown: Detaching display subsystem from window server
11.09.12 22:15:48,012 WindowServer[90]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
11.09.12 22:15:48,028 loginwindow[43]: Login Window Started Security Agent
11.09.12 22:15:48,076 locationd[44]: NOTICE,Location icon should now be in state 0
11.09.12 22:15:48,077 locationd[44]: locationd was started after an unclean shutdown
11.09.12 22:15:48,140 SecurityAgent[182]: This is the first run
11.09.12 22:15:48,140 SecurityAgent[182]: MacBuddy was run = 0
11.09.12 22:15:48,339 launchctl[186]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.teamviewer.teamviewer.plist
11.09.12 22:15:48,340 launchctl[186]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.teamviewer.teamviewer_desktop.plist
11.09.12 22:15:48,421 UserEventAgent[176]: cannot find useragent 1102
11.09.12 22:15:49,169 com.apple.launchd[1]: (com.apple.xprotectupdater[24]) Exited with code: 252
11.09.12 22:15:49,766 airportd[69]: _doAutoJoin: Already associated to “TELUS7187”. Bailing on auto-join.
11.09.12 22:15:49,787 airportd[69]: _doAutoJoin: Already associated to “TELUS7187”. Bailing on auto-join.
11.09.12 22:15:49,807 airportd[69]: _doAutoJoin: Already associated to “TELUS7187”. Bailing on auto-join.
11.09.12 22:15:50,863 awacsd[57]: InnerStore GetWakeInfoForZone: no external port for 1366256562.members.btmm.icloud.com.
11.09.12 22:15:51,198 awacsd[57]: InnerStore GetWakeInfoForZone: no external port for 1366256562.members.btmm.icloud.com.
11.09.12 22:15:51,000 kernel[0]: utun_ctl_connect: creating interface utun0
11.09.12 22:15:52,000 kernel[0]: ast_pending=0xffffff8003aa71b0
11.09.12 22:15:52,000 kernel[0]: cpu_interrupt=0xffffff8003abe650
11.09.12 22:15:52,000 kernel[0]: vboxdrv: fAsync=0 offMin=0x11cb offMax=0x1d7a
11.09.12 22:15:52,000 kernel[0]: VBoxDrv: version 4.1.20 r80170; IOCtl version 0x190000; IDC version 0x10000; dev major=34
11.09.12 22:15:52,000 kernel[0]: VBoxFltDrv: version 4.1.20 r80170
11.09.12 22:15:52,000 kernel[0]: VBoxAdpDrv: version 4.1.20 r80170
11.09.12 22:15:52,958 SecurityAgent[182]: User info context values set for simscheel
11.09.12 22:15:53,096 SecurityAgent[182]: Login Window login proceeding
11.09.12 22:15:53,299 loginwindow[43]: Login Window - Returned from Security Agent
11.09.12 22:15:53,323 loginwindow[43]: USER_PROCESS: 43 console
11.09.12 22:15:53,336 launchctl[237]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.teamviewer.teamviewer.plist
11.09.12 22:15:53,336 launchctl[237]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.teamviewer.teamviewer_desktop.plist
11.09.12 22:15:53,355 airportd[69]: _doAutoJoin: Already associated to “TELUS7187”. Bailing on auto-join.
11.09.12 22:15:53,474 launchctl[240]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.teamviewer.teamviewer.plist
11.09.12 22:15:53,474 launchctl[240]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.teamviewer.teamviewer_desktop.plist
11.09.12 22:15:53,489 com.apple.launchd.peruser.501[236]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
11.09.12 22:15:53,493 loginwindow[43]: Connection with distnoted server was invalidated
11.09.12 22:15:53,506 distnoted[241]: # distnote server agent absolute time: 68.111959738 civil time: Tue Sep 11 22:15:53 2012 pid: 241 uid: 501 root: no
11.09.12 22:15:53,763 WindowServer[90]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
11.09.12 22:15:53,776 Little Snitch Agent[249]: Little Snitch Agent version 3871 started.
11.09.12 22:15:53,830 com.apple.SecurityServer[15]: Session 100007 created
11.09.12 22:15:53,846 WindowServer[90]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
11.09.12 22:15:53,932 Little Snitch Network Monitor[255]: Little Snitch Netzwerkmonitor version 3871 started.
11.09.12 22:15:54,958 coreaudiod[260]: 2012-09-11 10:15:54.957627 PM [AirPlay] Started browsing for _airplay._tcp.
11.09.12 22:15:54,958 coreaudiod[260]: 2012-09-11 10:15:54.958113 PM [AirPlay] Started browsing for _raop._tcp.
11.09.12 22:15:55,361 awacsd[57]: InnerStore GetWakeInfoForZone: no external port for 1366256562.members.btmm.icloud.com.
11.09.12 22:15:56,657 com.apple.launchd.peruser.501[236]: (com.apple.afpstat-qfa[278]) Exited with code: 2
11.09.12 22:15:56,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=279[GoogleSoftwareUp] clearing CS_VALID
11.09.12 22:15:56,869 coreservicesd[63]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyChildApplicationLaunch to notificationID=129
11.09.12 22:15:57,991 com.apple.SecurityServer[15]: Session 100008 created
11.09.12 22:15:57,993 coreservicesd[63]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=152
11.09.12 22:15:58,001 SocialPushAgent[265]: Error: unable to get the current device-token:(null) and/or the uuid:(null)
11.09.12 22:15:58,004 SocialPushAgent[265]: Error: unable to get the current device-token:(null) and/or the uuid:(null)
11.09.12 22:15:58,117 appleprofilepolicyd[302]: appleprofilepolicyd: profiling drivers not loaded, loading
11.09.12 22:15:58,153 NotificationCenter[268]: Unable to simultaneously satisfy constraints:
"<NSLayoutConstraint:0x7fc842c34ee0 H:[NSView:0x7fc842a5d9f0]-(0)-|(LTR) (Names: widgetView:0x7fc842c31d90, '|':widgetView:0x7fc842c31d90 )>",
"<NSLayoutConstraint:0x7fc842c4f490 H:|-(100)-[NSView:0x7fc842a5d9f0](LTR) (Names: widgetView:0x7fc842c31d90, '|':widgetView:0x7fc842c31d90 )>",
"<NSLayoutConstraint:0x7fc842c1c000 H:|-(0)-[NSView:0x7fc84286fa80] (Names: '|':NSView:0x7fc842a5d9f0 )>",
"<NSLayoutConstraint:0x7fc842c4f720 H:[NSView:0x7fc84286fa80]-(0)-| (Names: '|':NSView:0x7fc842a5d9f0 )>",
"<NSAutoresizingMaskLayoutConstraint:0x7fc84282bbd0 h=--& v=-&- H:[widgetView(385)] (Names: widgetView:0x7fc842c31d90 )>",
"<NSLayoutConstraint:0x7fc84286c720 H:[NCSwitchButton:0x7fc84286bbd0]-(>=9)-| (Names: '|':NSView:0x7fc84286fa80 )>",
"<NSLayoutConstraint:0x7fc84286c6b0 H:|-(35)-[NSTextField:0x7fc84286c1f0] (Names: '|':NSView:0x7fc84286fa80 )>",
"<NSLayoutConstraint:0x7fc842819df0 H:[NCSwitchButton:0x7fc84286bbd0(64)]>",
"<NSLayoutConstraint:0x7fc842800c90 H:[NSTextField:0x7fc84286c1f0]-(NSSpace(8))-[NCSwitchButton:0x7fc84286bbd0]>",
"<NSLayoutConstraint:0x7fc84286c2c0 H:[NSTextField:0x7fc84286c1f0(184)]>"
Will attempt to recover by breaking constraint
<NSLayoutConstraint:0x7fc84286c2c0 H:[NSTextField:0x7fc84286c1f0(184)]>
Set the NSUserDefault NSConstraintBasedLayoutVisualizeMutuallyExclusiveConstraints to YES to have -[NSWindow visualizeConstraints:] automatically called when this happens. And/or, break on objc_exception_throw to catch this in the debugger.
11.09.12 22:15:58,153 lsboxd[301]: @AE relay 4755524c:4755524c
11.09.12 22:15:58,184 lsboxd[301]: @AE relay 4755524c:4755524c
11.09.12 22:15:58,196 NetworkBrowserAgent[304]: Starting NetworkBrowserAgent
11.09.12 22:15:58,259 blued[300]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
11.09.12 22:15:58,769 Battery Health[291]: Receipt at /Applications/Battery Health.app/Contents/_MASReceipt/receipt Ok!
11.09.12 22:16:00,688 ClamXavSentry[286]: clamd not running. Now trying to launch it...
11.09.12 22:16:04,902 com.apple.time[264]: Interval minimum value is 30 seconds (specified value: 21).
11.09.12 22:16:06,140 ClamXavSentry[286]: clamd launched successfully. Continuing...
11.09.12 22:16:06,148 ClamXavSentry[286]: scan email files
11.09.12 22:16:06,148 ClamXavSentry[286]: I will quarantine infected files
11.09.12 22:16:06,856 sudo[336]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/local/clamXav/bin/freshclam --log=/usr/local/clamXav/share/clamav/freshclam.log --on-update-execute=EXIT_1
11.09.12 22:16:13,464 com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[180]) Exit timeout elapsed (20 seconds). Killing
11.09.12 22:16:14,591 sudo[352]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/sbin/chown -R clamav:clamav /usr/local/clamXav/share/clamav
11.09.12 22:16:14,618 sudo[354]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod 0775 /usr/local/clamXav/share/clamav
11.09.12 22:16:14,638 sudo[356]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod 0664 /usr/local/clamXav/share/clamav/bytecode.cld /usr/local/clamXav/share/clamav/daily.cld /usr/local/clamXav/share/clamav/freshclam.log /usr/local/clamXav/share/clamav/main.cvd /usr/local/clamXav/share/clamav/mirrors.dat
11.09.12 22:16:14,656 sudo[358]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/touch /usr/local/clamXav/share/clamav/freshclam.log
11.09.12 22:16:14,676 sudo[360]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod a+rw /usr/local/clamXav/share/clamav/freshclam.log
11.09.12 22:16:29,345 launchctl[378]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.teamviewer.teamviewer.plist
11.09.12 22:16:29,346 launchctl[378]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.teamviewer.teamviewer_desktop.plist
11.09.12 22:16:29,867 com.apple.SecurityServer[15]: Session 100004 created
11.09.12 22:17:05,092 Google Chrome[421]: Unsure about the internals of CFAllocator but going to patch them anyway. If there is a crash inside of CFAllocatorAllocate, please report it at http://crbug.com/117476 . If there is a crash and it is NOT inside of CFAllocatorAllocate, it is NOT RELATED. DO NOT REPORT IT THERE but rather FILE A NEW BUG.
11.09.12 22:17:05,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=422[ksadmin] clearing CS_VALID
11.09.12 22:17:05,956 Google Chrome Helper[424]: Unsure about the internals of CFAllocator but going to patch them anyway. If there is a crash inside of CFAllocatorAllocate, please report it at http://crbug.com/117476 . If there is a crash and it is NOT inside of CFAllocatorAllocate, it is NOT RELATED. DO NOT REPORT IT THERE but rather FILE A NEW BUG.
11.09.12 22:17:06,333 Google Chrome Helper[427]: Unsure about the internals of CFAllocator but going to patch them anyway. If there is a crash inside of CFAllocatorAllocate, please report it at http://crbug.com/117476 . If there is a crash and it is NOT inside of CFAllocatorAllocate, it is NOT RELATED. DO NOT REPORT IT THERE but rather FILE A NEW BUG.
11.09.12 22:17:06,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=426[ksadmin] clearing CS_VALID
11.09.12 22:17:06,506 Google Chrome Helper[430]: Unsure about the internals of CFAllocator but going to patch them anyway. If there is a crash inside of CFAllocatorAllocate, please report it at http://crbug.com/117476 . If there is a crash and it is NOT inside of CFAllocatorAllocate, it is NOT RELATED. DO NOT REPORT IT THERE but rather FILE A NEW BUG.
11.09.12 22:17:06,507 Google Chrome Helper[429]: Unsure about the internals of CFAllocator but going to patch them anyway. If there is a crash inside of CFAllocatorAllocate, please report it at http://crbug.com/117476 . If there is a crash and it is NOT inside of CFAllocatorAllocate, it is NOT RELATED. DO NOT REPORT IT THERE but rather FILE A NEW BUG.
11.09.12 22:17:06,610 Google Chrome Helper[424]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1100)
11.09.12 22:17:06,648 Google Chrome Helper[431]: Unsure about the internals of CFAllocator but going to patch them anyway. If there is a crash inside of CFAllocatorAllocate, please report it at http://crbug.com/117476 . If there is a crash and it is NOT inside of CFAllocatorAllocate, it is NOT RELATED. DO NOT REPORT IT THERE but rather FILE A NEW BUG.
11.09.12 22:17:06,846 Google Chrome Helper[427]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1100)
11.09.12 22:17:07,090 Google Chrome Helper[431]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1100)
11.09.12 22:17:07,556 Google Chrome Helper[429]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1100)
11.09.12 22:17:07,635 Google Chrome[421]: Couldn't contact spell checker for Deutsch
11.09.12 22:17:09,267 Google Chrome Helper[435]: Unsure about the internals of CFAllocator but going to patch them anyway. If there is a crash inside of CFAllocatorAllocate, please report it at http://crbug.com/117476 . If there is a crash and it is NOT inside of CFAllocatorAllocate, it is NOT RELATED. DO NOT REPORT IT THERE but rather FILE A NEW BUG.
11.09.12 22:17:09,369 Google Chrome Helper[436]: Unsure about the internals of CFAllocator but going to patch them anyway. If there is a crash inside of CFAllocatorAllocate, please report it at http://crbug.com/117476 . If there is a crash and it is NOT inside of CFAllocatorAllocate, it is NOT RELATED. DO NOT REPORT IT THERE but rather FILE A NEW BUG.
11.09.12 22:17:09,439 Google Chrome Helper[437]: Unsure about the internals of CFAllocator but going to patch them anyway. If there is a crash inside of CFAllocatorAllocate, please report it at http://crbug.com/117476 . If there is a crash and it is NOT inside of CFAllocatorAllocate, it is NOT RELATED. DO NOT REPORT IT THERE but rather FILE A NEW BUG.
11.09.12 22:17:09,602 Google Chrome Helper[438]: Unsure about the internals of CFAllocator but going to patch them anyway. If there is a crash inside of CFAllocatorAllocate, please report it at http://crbug.com/117476 . If there is a crash and it is NOT inside of CFAllocatorAllocate, it is NOT RELATED. DO NOT REPORT IT THERE but rather FILE A NEW BUG.
11.09.12 22:17:09,910 Google Chrome Helper[437]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1100)
11.09.12 22:17:10,192 Google Chrome Helper[440]: Unsure about the internals of CFAllocator but going to patch them anyway. If there is a crash inside of CFAllocatorAllocate, please report it at http://crbug.com/117476 . If there is a crash and it is NOT inside of CFAllocatorAllocate, it is NOT RELATED. DO NOT REPORT IT THERE but rather FILE A NEW BUG.
11.09.12 22:17:10,228 Google Chrome Helper[438]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1100)
11.09.12 22:17:10,798 Google Chrome Helper EH[441]: Unsure about the internals of CFAllocator but going to patch them anyway. If there is a crash inside of CFAllocatorAllocate, please report it at http://crbug.com/117476 . If there is a crash and it is NOT inside of CFAllocatorAllocate, it is NOT RELATED. DO NOT REPORT IT THERE but rather FILE A NEW BUG.
11.09.12 22:17:10,952 Google Chrome Helper[436]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1100)
11.09.12 22:17:11,221 Google Chrome Helper[440]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1100)
11.09.12 22:17:11,613 Google Chrome Helper EH[443]: Unsure about the internals of CFAllocator but going to patch them anyway. If there is a crash inside of CFAllocatorAllocate, please report it at http://crbug.com/117476 . If there is a crash and it is NOT inside of CFAllocatorAllocate, it is NOT RELATED. DO NOT REPORT IT THERE but rather FILE A NEW BUG.
11.09.12 22:17:12,726 Google Chrome Helper[435]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1100)
11.09.12 22:17:13,461 Google Chrome Helper EH[446]: Unsure about the internals of CFAllocator but going to patch them anyway. If there is a crash inside of CFAllocatorAllocate, please report it at http://crbug.com/117476 . If there is a crash and it is NOT inside of CFAllocatorAllocate, it is NOT RELATED. DO NOT REPORT IT THERE but rather FILE A NEW BUG.
11.09.12 22:17:27,353 WindowServer[90]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
11.09.12 22:17:27,397 loginwindow[43]: find_shared_window: WID -1
11.09.12 22:17:27,397 loginwindow[43]: CGSGetWindowTags: Invalid window 0xffffffff
11.09.12 22:17:27,398 loginwindow[43]: find_shared_window: WID -1
11.09.12 22:17:27,398 loginwindow[43]: CGSSetWindowTags: Invalid window 0xffffffff
11.09.12 22:17:27,501 coreservicesd[63]: Application App:"loginwindow" [ 0x0/0x1001] @ 0x0x7f81a0609e00 tried to be brought forward, but isn't in fPermittedFrontASNs ( ( ASN:0x0-0x7b07b:) ), so denying.
11.09.12 22:17:27,501 WindowServer[90]: [cps/setfront] Failed setting the front application to loginwindow, psn 0x0-0x1001, securitySessionID=0x186a5, err=-13066
11.09.12 22:17:27,681 loginwindow[43]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
11.09.12 22:17:27,682 loginwindow[43]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
11.09.12 22:17:33,932 Dock[282]: no information back from LS about running process
A response with any suggestions would be great! Am actually off for a business trip and can't visit my local Apple Store where I bought my MBP and even don't really want that
Thanks in advance!
Regards
Simonquax88 wrote:
11.09.12 22:16:06,148 ClamXavSentry[286]: scan email files
11.09.12 22:16:06,148 ClamXavSentry[286]: I will quarantine infected files
This doesn't have anything to do with your problem, but it will likely cause other issues with your e-mail.
Here's my standard recommendation concerting the use of A-V software to deal with potentially infected messages:
Never use ClamXav (or any other A-V software) to move (quarantine) or delete e-mail. It will corrupt the mailbox index which could cause loss of other e-mail and other issues with functions such as searching. It may also leave the original e-mail on your ISP's e-mail server and will be re-downloaded to your hard drive the next time you check for new mail.
So, if you choose to "Scan e-mail content for malware and phishing" in the General Preferences, make sure you do not elect to either Quarantine or Delete infected files.
When possibly infected e-mail files are found:
Right-click/Control-click on either the infection or file name in the ClamXav window.
Select "Reveal In Finder" from the pop-up menu.
When the window opens, double-click on the file to open the message in your e-mail client application.
Read the message and if you agree that it is junk/spam/phishing then use the e-mail client's delete button to delete it (this is especially important when the word "Heuristics" appears in the infection name).
If you disagree and choose to retain the message, return to ClamXav and choose "Exclude From Future Scans" from the pop-up menu.
If this is a g-mail account and those messages continue to show up after you have deleted them in the above manner, you may need to log in to webmail using your browser, go to the "All Mail" folder, find the message(s) and use the delete button there to permanently delete them from the server.
To fix the corrupted mailbox index(es), highlight each one that was corrupted and choose Rebuild from the appropriate menu. -
In-Place Element Structures, References and Pointers, Compiler Optimization, and General Stupidity
[The title of this forum is "Labview Ideas". Although this is NOT a direct suggestion for a change or addition to Labview, it seems appropriate to me to post it in this forum.]
In-Place Element Structures, References and Pointers, Compiler Optimization, and General Stupidity
I'd like to see NI actually start a round-table discussion about VI references, Data Value references, local variables, compiler optimizations, etc. I'm a C programmer; I'm used to pointers. They are simple, functional, and well defined. If you know the data type of an object and have a pointer to it, you have the object. I am used to compilers that optimize without the user having to go to weird lengths to arrange it.
The 'reference' you get when you right click and "Create Reference" on a control or indicator seems to be merely a shorthand read/write version of the Value property that can't be wired into a flow-of-control (like the error wire) and so causes synchronization issues and race conditions. I try not to use local variables.
I use references a lot like C pointers; I pass items to SubVIs using references. But the use of references (as compared to C pointers) is really limited, and the implementation is insconsistent, not factorial in capabilites, and buggy. For instance, why can you pass an array by reference and NOT be able to determine the size of the array EXCEPT by dereferencing it and using the "Size Array" VI? I can even get references for all array elements; but I don't know how many there are...! Since arrays are represented internally in Labview as handles, and consist of basically a C-style pointer to the data, and array sizing information, why is the array handle opaque? Why doesn't the reference include operators to look at the referenced handle without instantiating a copy of the array? Why isn't there a "Size Array From Reference" VI in the library that doesn't instantiate a copy of the array locally, but just looks at the array handle?
Data Value references seem to have been invented solely for the "In-Place Element Structure". Having to write the code to obtain the Data Value Reference before using the In-Place Element Structure simply points out how different a Labview reference is from a C pointer. The Labview help page for Data Value References simply says "Creates a reference to data that you can use to transfer and access the data in a serialized way.". I've had programmers ask me if this means that the data must be accessed sequentially (serially)...!!! What exactly does that mean? For those of use who can read between the lines, it means that Labview obtains a semaphore protecting the data references so that only one thread can modify it at a time. Is that the only reason for Data Value References? To provide something that implements the semaphore???
The In-Place Element Structure talks about minimizing copying of data and compiler optimization. Those kind of optimizations are built in to the compiler in virtually every other language... with no special 'construct' needing to be placed around the code to identify that it can be performed without a local copy. Are you telling me that the Labview compiler is so stupid that it can't identify certain code threads as needing to be single-threaded when optimizing? That the USER has to wrap the code in semaphores before the compiler can figure out it should optimize??? That the compiler cannot implement single threading of parts of the user's code to improve execution efficiency?
Instead of depending on the user base to send in suggestions one-at-a-time it would be nice if NI would actually host discussions aimed at coming up with a coherent and comprehensive way to handle pointers/references/optimization etc. One of the reasons Labview is so scattered is because individual ideas are evaluated and included without any group discussion about the total environment. How about a MODERATED group, available by invitation only (based on NI interactions with users in person, via support, and on the web) to try and get discussions about Labview evolution going?
Based solely on the number of Labview bugs I've encountered and reported, I'd guess this has never been done, with the user community, or within NI itself.....Here are some articles that can help provide some insights into LabVIEW programming and the LabVIEW compiler. They are both interesting and recommended reading for all intermediate-to-advanced LabVIEW programmers.
NI LabVIEW Compiler: Under the Hood
VI Memory Usage
The second article is a little out-of-date, as it doesn't discuss some of the newer technologies available such as the In-Place Element Structure you were referring to. However, many of the general concepts still apply. Some general notes from your post:
1. I think part of your confusion is that you are trying to use control references and local variables like you would use variables in a C program. This is not a good analogy. Control references are references to user interface controls, and should almost always be used to control the behavior and appearance of those controls, not to store or transmit data like a pointer. LabVIEW is a dataflow language. Data is intended to be stored or transmitted through wires in most cases, not in references. It is admittedly difficult to make this transition for some text-based programmers. Programming efficiently in LabVIEW sometimes requires a different mindset.
2. The LabVIEW compiler, while by no means perfect, is a complicated, feature-rich set of machinery that includes a large and growing set of optimizations. Many of these are described in the first link I posted. This includes optimizations you'd find in many programming environments, such as dead code elimination, inlining, and constant folding. One optimization in particular is called inplaceness, which is where LabVIEW determines when buffers can be reused. Contrary to your statement, the In-Place Element Structure is not always required for this optimization to take place. There are many circumstances (dating back years before the IPE structure) where LabVIEW can determine inplaceness and reuse buffers. The IPE structure simply helps users enforce inplaceness in some situations where it's not clear enough on the diagram for the LabVIEW compiler to make that determination.
The more you learn about programming in LabVIEW, the more you realize that inplaceness itself is the closest analogy to pointers in C, not control references or data references or other such things. Those features have their place, but core, fundamental LabVIEW programming does not require them.
Jarrod S.
National Instruments
Maybe you are looking for
-
Manual Importing How does this work?
I'm confused as often is when it comes to computer technology. So anyway I had to switch to manual importing because of multilple computers, but I'm not sure how to operate it. What do I need to do when I get new music and need to import them? I didn
-
Complicated project: Placing images on 3D planes after animating?
I'm working on a project that has me dealling with about 100+ 3D images that have to be animated (Think a collage of images making up a title that can be rotated in 3D space.). The problem is, I won't be getting the neccessary images that make up the
-
Copy Calculated/Restricted Keyfigures between DIFFERENT InfoProviders
Hello Gurus, I am struggling with a problem and there doesn't seem to be any clear help on the web. But maybe you can help me. How can one copy a restricted keyfigure from one infoprovider to another different one when all the infoobjects used for th
-
Duplication of photos on HD using iPhoto...
When I download photos from my digital camera, they go to a folder on the HD for that camera. When I load these photos manually into iPhoto does that also take additional HD space by having them in iPhoto Library?
-
Why airport reconnect by itself
Hi, when i disconnect from my network (i am connectet via wlan), airport reconnect by itself. In the past its just sometimes done it, but now nearly every time. I have to disconnect it two or three times and then it wont connect again by itself. It d