Generate a xml config file for SPA3102

Hi everyone,
I'm trying to create a xml config file for my SPA3102
I tried http://<phone -or- device ip address>/admin/spacfg.xml
to generate the xml but i had a 404 Not Found !
web page so i'm searching a solution to generate a config file from the existing configuration
I don't want to generate 2 html files for voice and router
can you help me ?

Basically, XML config file for this SPA3102 can be generated using SPC tool software (Profile
compiler). However, I think this tool is only available from your Value Added Reseller or from your VoIP.Thanks.

Similar Messages

How to generate an XML Configuration File for EBS Source Type

Hi,
We have installed SES, I want to integrate it to enable for searching repository contracts.
In the sources I have selected oracle.apps.okc.repository.textsearch.server.RepHeaderSearchExpVO.
For this source I need to specify the Configuration URL.
Here I need to provide the path for configuration XML file. But before that I need to generate the XML Configuration file.
Is there any steps on how we can create this XML file.
like I would want to know how we can create the XML file and on which folder on the server should I be putting it
Thanks

Hi there,
We are running into same issue and need the exact same information. Can someone help with this question on priority?
Thanks,
Darshan

Generate xml source file for Oracle Order Capture Print Quote

Hi,
I am new to xml and need to work on creating templates for Print Quote.
I am trying to generate the xml source file for which I enabled the report in system administrator and set the output to XML and assigned to Quoting Reports responsiblity. I then assigned XML Report Publisher to the same responsiblity.
I ran the report (Print Quote) and then I am trying to run the XML Report Publisher but I cannot get the request id in the list of values.
I am able to generate xml source file for other reports like Printed Purchase Order etc.,
The view output for the (Print Quote) report is as follows:
<?xml version="1.0" ?>
- 
<ASOPQTER />
How do I get the xml source file? Or are there seeded templates that I can use to create more templates? Any help would be appreciated. Thanks Ravi

Hi, I am in the same position - did this issue ever ger resolved by anyone. I have done a few XMLP reports successfully now using the Word add-in, but customising the Quote output differs from other standard reports.
If you look at the data definition for Quote it is a 'dummy' definition and has no XML file attached. Does anyone know how I can get the XML format for the report output?
Also the template uses XSL-FO ?!?!?! rather than RTF - not sure how to work with this, the Oracle docs are not very helpful in this regard either.
Has anyone successfully managed to customise the Quote print report? Many thanks,
Roger

Generate GS1-XML standard file

Hello Dear,
I am using 10g Database R2. i want to generate GS1-XML file from a master-detail tables.
is there any example or help for this problem.
I shall be thankfull,
Best Regards,
Zafar Iqbal

Basically, XML config file for this SPA3102 can be generated using SPC tool software (Profile
compiler). However, I think this tool is only available from your Value Added Reseller or from your VoIP.Thanks.

Single XML configuration file for all the SSIS packages(including parent and child packages)

Hi
I have some 16 ssis packages. source Db and destination Db for these packages are common. I am calling these child packages in a master package.
I want to use only one XML config file for this master.
How do i use same for all child packages?
and can i do it with parent package variable?

I created a master package with a variable master, and in value i have entered the configuration file path.
Hi vjp dinu,
You should create variables in the parent package to pass values to variables in each child package rather than pass the file path of the XML Configurations file of the parent package.
As Visakh mentioned, you can achieve your goal by creating corresponding variables in the parent package for each child package, and enable Package Configurations for the parent package so that you can control the values through the XML Configurations file
for the variables of the parent package.
Supposing there is a variable FilePath in child package 1, a variable ServerName in child package 2, then, we need to create two variables pFilePath, pServerName in the parent package. After configuring the Parent package variable in each child package (e.g.
mapping pFilePath to FilePath, pServerName to ServerName), you can enable XML Configurations for the parent package, and expose the value property for both pFilePath and pServerName variables. In this way, you can modify the XML Configurations file of the
parent package and the specified values will passed to the child packages.
Reference:
http://microsoft-ssis.blogspot.com/2011/06/passing-variables-from-parent-package.html
Regards,
Mike Yin
TechNet Community Support

Urgent: UWL XML Config file

Hi all!
I copied the business object EXTSRV to ZEXTSRV and created a new method zprocess that is mainly a copy of the Process method of the EXTSRV BO just that the creation part of the url is diffirent. I kept the call_browser function.
Then, I assigned this method to a task in the workflow this task is copy of the standard task TS50000075. I added the itemtype to the UWL XML config file and uploaded it to the system successfuly then i cleared the cash.
When i double click on the item in the UWL it partially works. I see the text written in the task but it is supposed to pop up a window. This window doesn't appear.
Can anyone help with that?
Thank you in advance,
Hajar

Hi
Just check this out Please do not forget to give points
User Roles     Restricts who can get work items via the user role. For example, you can assign a portal role here, such as buyer. Only users with the role buyer will see items from the provider system in UWL.You can have multiple user roles separated by semi-colon. By specifying user roles for the portal users, it can be restricted as to who gets the work items in UWL. For example, you can assign a portal role to a user, such as buyer. Only users with the role buyer will see items from a system, for example, B7QCLNT000 in UWL.
Pull Channel Delta Refresh Period (in Seconds)     Delta Pull mechanism of UWL enables new items to be fetched from the back end SAP systems every minute by default every 60 seconds, and every 30 seconds for alerts. However, this can be configured. The user does not need to use the refresh function to update the inbox. Once items are retrieved, timestamps are updated for the users whose items are successfully retrieved. These retrieved items are updated in the UWL cache. Setup necessary from Business Workflow to enable Delta Pull MechanismSome configuration settings are required if you use the UWL and the Extended Notifications for SAP Business Workflow. Define the following two batch jobs:...●      Background job (for example UWL_DELTA_PULL_1), consisting of a single step of ABAP report RSWNUWLSEL in FULL mode, using a report variant.Run the job once a day.1.     ●      A background job (for example UWL_DELTA_PULL_2), consisting of a single step of ABAP report RSWNUWLSEL in DELTA mode (default mode is delta, so report variant is optional).Run the job every one to three minutes (depending on the performance of the back end SAP system).Setup necessary from UWL to enable Delta Pull Mechanism The UWL service user in portal, with user id uwl_service, has to be granted access to the corresponding back end systems. This is a predefined service user provided by UWL. When the back end system is configured in the UWL administration page, an automated process is triggered to create a corresponding UWL service user in the back end system.Check role assignments and profiles status of this automated generated UWL service user and perform user comparison if necessary.●      If SAPLogon ticket is used (without using user mapping), you first create the system entry. A message about uwl_service user appears. Then in the back-end system give the uwl_service user an initial password. Now edit the system entry.●      If user mapping is used, you can first configure the back end system in the UWL administration page. Then access the respective back end system to initialize the password for the user uwl_service. Then, do user mapping in the portal as usual for service user uwl_service.In case uwl_service fails to be created in the back end and does not exist, you can manually create a back end user with the id uwl_service and assign the role SAP_BC_UWL_SERVICE and the rights as other end users.ORMap uwl_service to an existing back end user. Make sure that there is no multiple user mapping (there must not be two portal users mapped to the same back end user). This back end user must have the role SAP_BC_UWL_SERVICE.
Snapshot Refresh Period (in minutes)     All items at the current time are fetched from the backend (for example from the SAP Business Workflow). The cache is synchronized thereafter. New / modified / deleted / updated items are fetched every session (every log on) if you leave the field value empty or enter a negative number.To specify a particular time frame for which the refresh occurs, enter the number of minutes
The above registration procedure is usually sufficient to use a UWL iView. Item type retrieval and registration requires a connection to the systems and may take a couple of minutes.
For each system, they are generated as the configuration named uwl.webflow.<system_alias> or uwl.alert.<system_alias>.
In Manager Self-Service (MSS), the Universal Worklist groups together in Workset: Work
Overview the various workflow tasks and alerts that are relevant for a manager.
The standard MSS delivery includes the configuration file com.sap.pct.erp.mss.001.xml for the universal worklist.
1. In the portal, choose System Administration →System Configuration →Universal
Worklist and Workflow →Universal Worklist →UWL Systems Configuration.
2. Create the following system connections:
If you have already registered a suitable connector to the system connected to
the system alias, the existing connector is sufficient and you do not have to
register an additional one.
○ System alias: SAP_ECC_Financials
Connection types:
■ WebFlowConnector
■ AlertConnector
○ System alias: SAP_ECC_HumanResources
Connection type WebFlowConnector
○ System alias: SAP_SRM
Connection type WebFlowConnector
Leave the Web Dynpro Launch System field blank for all system connections.
with regards
subrato

Where is config file for port 5500 ??? Help

Where is config file for port 5500 ??? Help
Hello I have 10g_win32_db, and I want to change the http://localhost:5500 to something else where can i find the config file for that ?
thanks

To modify port 5500:
- Modify the file $ORACLE_HOME/<hostname_sid>/sysman/config/emoms.properties
Change the ConsoleServerPort property to the new port.
- Modify the file $ORACLE_HOME/<hostname_sid>/sysman/config/emd.properties
Change the REPOSITORY_URL property.
- Modify the file $ORACLE_HOME/oc4j/j2ee/<hostname_sid>/config/http-web-site.xml
Change all references of the old port to the new port.
Restart the DB Control process:
emctl start dbconsole

XML Config File

Firslty, I am a visual studio developer now working on a project in j2ee / weblogic.
I have a project that currently uses an IP address that is hard coded. Ideally I would like this changed to some sort of XML config file. Can someone please provide me with an idiots guide to doing this please.
Thanks in advance......

The Preferences API does allow new ones to be created and to be written in
XML format, but I found the XML format allowed very rigid and not very useful for
what I wanted to do.The article caused me to finally read up on Preferences. It's neat, but not really for the same thing as configuration files. Configuration files typically have data which is fixed for the program, regardles of environment. Messages, SQL text and so on. The Preferences system is for stuff that's specified when it's installed on a particular system (URLs, file directories etc.), and simple stuff that you want to persist for a user, like window positions, user name etc..
On windows it's stored in the registry. On unix hidden away on your home directory.

Where can i find the doc about xml config file of 9ias?

i cant find the "Oracle9iAS Containers for J2EE User’s Guide",
it should contains the info about the xml config file, i dont
know why oracle launch a product without the config guide, i
have read ton of material for learning the configuration of 9ias
but still have not find the answer!
i cant find it in otn:
http://otn.oracle.com/tech/java/oc4j/content.html#technicaldocs,
it have jsp, servlet....etc guide but no config guide, if
someone seen it in microsoft or sun or borland website, please
call me :)

i mean the deployment config file in the application server like: server.xml, application.xml, web.xml, it is the J2EE standard, and can be used between all application server, tomcat, 9ias, weblogic........

[svn:osmf:] 13633: Add build config file for SMILPlugin project

Revision: 13633
Revision: 13633
Author:   [email protected]
Date:     2010-01-19 14:23:44 -0800 (Tue, 19 Jan 2010)
Log Message:
Add build config file for SMILPlugin project
Added Paths:
    osmf/trunk/plugins/SMILPlugin/SMILPlugin-build-config.xml

Hi mg30,
There is no way to overwrite the XML configurations file just through modifying the SQL Server Agent job steps. The Dtexec utility will apply the default package configurations for the second time after applying the options specified in the command
lines or other package configurations configured in the job step.
If the package is not deployed/installed, the Dtexec utility looks for the XML configurations file according to the file path defined in the Package Configurations Organizer window. In this situation, you need to either disable the package configurations
or modify the XML file path in the BIDS.
If the package is already deployed/installed, you need to modify the package as above or re-specify the install folder for the package configurations file.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

UWL config file for Customer, Vendors and Materials

Hello All,
We are trying to integrated uwl to connect to a MDM system for objects Vendors, Customer and Materials. I have looked at the MDM UWL config file, it is configured only for Business partners and products.. does anybody have the config file for Customer, Vendor and Material using business content..
Thanks in advance
Som

Hey Som,
If you are talking about Portal UWL, then you have to go for System Admin, there you should see UWL related iviews. There you have the ability to download the uwl xml. in that you have to do some modifications.
All that matters for your problem is the MDM System you have created. when you chanage the respository informatin at this system. then your problem should be solved.
Thanks,
Raghavendra

[svn:osmf:] 13602: Update build-config files for sample apps.

Revision: 13602
Revision: 13602
Author:   [email protected]
Date:     2010-01-18 17:08:30 -0800 (Mon, 18 Jan 2010)
Log Message:
Update build-config files for sample apps.
Modified Paths:
    osmf/trunk/apps/samples/framework/DynamicStreamingSample/DynamicStreamingSample-build-con fig.xml
    osmf/trunk/apps/samples/framework/ExamplePlayer/ExamplePlayer-build-config.xml
    osmf/trunk/apps/samples/framework/GGTrackingPlugin/GGTrackingPlugin-build-config.xml
    osmf/trunk/apps/samples/framework/GGTrackingSample/GGTrackingSample-build-config.xml
    osmf/trunk/apps/samples/framework/MetadataSample/MetadataSample-build-config.xml
    osmf/trunk/apps/samples/framework/PluginSample/PluginSample-build-config.xml
    osmf/trunk/apps/samples/framework/ReferenceSample/ReferenceSample-build-config.xml
    osmf/trunk/apps/samples/framework/SampleLoggers/SampleLoggers-build-config.xml
    osmf/trunk/apps/samples/framework/SamplePlugin/SamplePlugin-build-config.xml
Added Paths:
    osmf/trunk/apps/samples/framework/MediaPlayerWrapper/MediaPlayerWrapper-build-config.xml
Removed Paths:
    osmf/trunk/apps/samples/framework/MediaPlayerWrapper/MediaPlayer-build-config.xml

[svn:osmf:] 13604: Update build-config files for sample plugins.

Revision: 13604
Revision: 13604
Author:   [email protected]
Date:     2010-01-18 17:09:32 -0800 (Mon, 18 Jan 2010)
Log Message:
Update build-config files for sample plugins.
Modified Paths:
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/AkamaiPluginSample-build-config.xml
    osmf/trunk/apps/samples/plugins/MASTSample/MASTSample-build-config.xml

Thanks Brian. I would certainly appreciate the maintenance and documentation of some of these. The one that most comes to mind is the OSMFTest suite. This would be valuable if only so that developers have some idea of the coverage that's going on under the hood. It would also help for diagnosing what's going on when behavior is not as expected. I was pleased that when I figured out how to compile this directory, I could see that there were 1109 tests, all of which passed except for one that failed due to not being on my local security whitelist.

[svn:osmf:] 13606: Update build-config files for framework projects.

Revision: 13606
Revision: 13606
Author:   [email protected]
Date:     2010-01-18 17:20:00 -0800 (Mon, 18 Jan 2010)
Log Message:
Update build-config files for framework projects.
Modified Paths:
    osmf/trunk/framework/OSMF/readme.txt
    osmf/trunk/framework/OSMFAIRTest/OSMFAIRTest.mxml
    osmf/trunk/framework/OSMFIntegrationTest/OSMFIntegrationTest.mxml
    osmf/trunk/framework/OSMFIntegrationTest/OSMFIntegrationTestHeadless.mxml
    osmf/trunk/framework/OSMFTest/OSMFTest.mxml
    osmf/trunk/framework/OSMFTest/OSMFTestHeadless.mxml
Added Paths:
    osmf/trunk/framework/OSMF/osmf-build-config.flex
    osmf/trunk/framework/OSMF/osmf-build-config.flexcov
    osmf/trunk/framework/OSMF/osmf-build-config.xml
    osmf/trunk/framework/OSMFAIRTest/OSMFAIRTest-build-config.xml
    osmf/trunk/framework/OSMFIntegrationTest/org/osmf/OSMFIntegrationTests.as
    osmf/trunk/framework/OSMFIntegrationTest/osmfintegrationtest-build-config.xml
    osmf/trunk/framework/OSMFTest/OSMFTest.flex
    osmf/trunk/framework/OSMFTest/OSMFTest.flexcov
    osmf/trunk/framework/OSMFTest/org/osmf/OSMFTests.as
    osmf/trunk/framework/OSMFTest/osmftest-build-config.flex
    osmf/trunk/framework/OSMFTest/osmftest-build-config.flexcov
    osmf/trunk/framework/OSMFTest/osmftest-build-config.xml
Removed Paths:
    osmf/trunk/framework/OSMF/mediaframework-build-config.flex
    osmf/trunk/framework/OSMF/mediaframework-build-config.flexcov
    osmf/trunk/framework/OSMF/mediaframework-build-config.xml
    osmf/trunk/framework/OSMFAIRTest/MediaFrameworkAirTest-build-config.xml
    osmf/trunk/framework/OSMFIntegrationTest/mediaframeworkintegrationtest-build-config.xml
    osmf/trunk/framework/OSMFIntegrationTest/org/osmf/MediaFrameworkIntegrationTests.as
    osmf/trunk/framework/OSMFTest/MediaFrameworkFlexTest.flex
    osmf/trunk/framework/OSMFTest/MediaFrameworkFlexTest.flexcov
    osmf/trunk/framework/OSMFTest/mediaframeworkflextest-build-config.flex
    osmf/trunk/framework/OSMFTest/mediaframeworkflextest-build-config.flexcov
    osmf/trunk/framework/OSMFTest/mediaframeworkflextest-build-config.xml
    osmf/trunk/framework/OSMFTest/org/osmf/MediaFrameworkTests.as

What kind of projects are they (Struts/JSF/Hibernate)? Does the working project differ in any way with other two apps?
What exactly is not working? Are they recognized by workshop as Struts/JSF/Hibernate app?
Please send the .log to [email protected]

[svn:osmf:] 13605: Update build-config files for libs.

Revision: 13605
Revision: 13605
Author:   [email protected]
Date:     2010-01-18 17:10:01 -0800 (Mon, 18 Jan 2010)
Log Message:
Update build-config files for libs.
Modified Paths:
    osmf/trunk/libs/VAST/vast-build-config.flex
    osmf/trunk/libs/VAST/vast-build-config.flexcov
    osmf/trunk/libs/VAST/vast-build-config.xml
    osmf/trunk/libs/adobe/NetMocker/netmocker-build-config.xml

Thanks Brian. I would certainly appreciate the maintenance and documentation of some of these. The one that most comes to mind is the OSMFTest suite. This would be valuable if only so that developers have some idea of the coverage that's going on under the hood. It would also help for diagnosing what's going on when behavior is not as expected. I was pleased that when I figured out how to compile this directory, I could see that there were 1109 tests, all of which passed except for one that failed due to not being on my local security whitelist.

Generate a xml config file for SPA3102

Similar Messages

Maybe you are looking for