Generate an additional iDoc message type when calling BD12
How can a specific iDoc message type be generated (in addition to the other iDocs) when calling BD12 with specific output type?
I would like that all iDocs belonging to one serialization group will be generated when calling BD12. is that possible?
Thank you in advance,
Asmaa
Hi,
Kinldy check the links which are useful to you.
http://www.beinsoft.com/articles/sap-tutorial-ale-distribution-model2.php
Thanks,
Ramesh
Similar Messages
-
How link customize IDOC message type with FM ?
Hi,
I have created new IDOC message type ZCOST and FM ZMASTERIDOC_CREATE_COST. (Outbound).
Please advise how link the message type and FM ? so everytime i am executing BD21 with message type ZCOST the program always calling FM ZMASTERIDOC_CREATE_COST to generate the IDOC.
Thank You and Best Regards
FernandHI,
You need to link Mssage type, IDOC type and the FM (also extension idoc type if exits) in TCODE: WE57 --> go to change mode
--> then new entries --> even you need to gove the direction inbound/outbound.
Also you need to create a outbound custom process code in WE41. and link the FM to the process code.
This process code shold be assigned to the partner profile in we20 in outbound parameters -> so you FM will be picked up qutomatically.
regards,
Nazeer
Edited by: N a z e e r on Jul 14, 2010 3:14 PM -
Attribute extension generation to IDOC message type CRMXIF_IBASE_SAVE_M
Various attributes have been defined and assigned to a set type using tcode COMM_ATTRSET. The set type includes an entry in field CDB Table CDBD_ATTRVAL. The Create API Append has been checked when including in a transport which generated the API append structure for the set type. The set type has been assigned to a Category via tcode COMM_HIERARCHY.
We are planning to use IDOC message type CRMXIF_IBASE_SAVE_M for the legacy data migration. How do we include the new attributes?You have to use TCode BDFG to generate a new Message Type . This will create a new Message type and a new Idoc type and will include the new Atributes.
we have used to create a new Message type for our new fields in ACTIVITY_H ( extended through EEWB )
Make sure , you refer to some OSS Note , which will tell you the steps to do so , As for first time user of BDFG its very tricky. -
IDOC - message type WMMBXY(Stock transfer from quality to unrestricted)
Hi Gurus,
I have IDOC problem.
Inbound message type WMMBXY(Stock transfer from quality to unrestricted), The status if I check in WM02 of Doc is "51-Application document not posted"
Error Message ""Required function
MB_CREATE_GOODS_MOVEMENT is not being processed".
Please Help.
PrashantHi
The Idoc whcile Posting using Message type WMMBXY calls the Function module L_IDOC_INPUT_WMMBXY & in turn this calls the function module MB_CREATE_GOODS_MOVEMENT.
This function is not getting executed.
Please check if the Movemnt type used is not active for WM movemnts.
If you have used previously this movemnt type & now it is not working. Please take hlep of ABAPer for debugging & finding the Root cause
Thanks & Regards
Kishore -
Idoc/message type related to su01 tcode fields?
hi experts,
when i create a user in su01,an idoc should get triggered.
are there any standard idoc / message type having fields related to this.
thanks,
charu
Edited by: charudevrani on Jan 11, 2012 7:38 AMHi Charu,
You can use one of following IDoc types, depending on the action you want to perform on the user master record:
USERCHANGE Change user
USERCLONE Create User with Template in Another System
USERCREATE BAPI to Create a User
Regards,
Marcin -
CRM: IDOC Message Type: CRMXIF_PARTNER_REL_SAVE_M
Hi,
I'm currently working on a CRM data migration project. I'm using the IDOC Message Type: <b>CRMXIF_PARTNER_REL_SAVE_M</b> to map data into contact relationship structures.
The problem I am having is the above interface works with SAP standard <b>BUR001</b> type contact relationships. But a copy was taken of <b>BUR001(is contact person for) => ZUR001 (former contact person of)</b>. This allows you to add a date range: <b>DATE_TO - DATE_FROM</b>. Using the above interface I am able to map these dates to the <b>ZUR001</b> type relationships.
All the other data I try and map i.e Function, Telephone No, Fax No ect.. will not map. I'm at a loss as to why not?
note: running CRM 4.0
Any help with this would be greatly appreciated.
Regards,
Philip JohannesenThanks Saquib, the OSS note was very informative.
Do you know where I can find <b>" In addition, you can find DXWB/LSMW examples under service.sap.com/CRM-Integration which you can install in a CRM system and use as models."?</b>
I've looked under the new link <b>"service.sap.com/crm-netweaver"</b>. But have been unable to find any examples.
I've awarded points as promised.
Regards,
Philip Johannesen -
IDOC Message Type FIDCCP02 - Error RW029
Hi All,
We are trying to post a FB01 using a IDOC message type - FIDCC2 and struck at error message -
<b>Accounting transaction not permitted for posting in FI/CO
Message no. RW029</b>
When i try to post directly using the exact data in the IDOC, through FB01, there is no problem.
Debug showed that the error is in the following -
Include <b>LRWCLF01</b>
check business process
SELECT SINGLE * FROM t022 INTO ld_t022
WHERE activity = t_acchd-glvor.
IF sy-subrc IS INITIAL.
IF LD_T022-VORGTYP = 0 OR <---------
IF ld_t022-satztyp <> 0.
MESSAGE e029 WITH t_acchd-glvor.
ENDIF.
ELSE.
MESSAGE e029 WITH t_acchd-glvor.
ENDIF.
If this is not the right message type to use, can you suggest any other message type? FB01 we are trying to post is a simple GL posting, no tax, no withholding, etc. IDOC is just a 2 line posting.
Any help/advice is highly appreciated.
Many Thanks,
ShashiHi Shashi ,
This table is for Business Process t022 based on activity .
Check your customise settings .
There is no problem with message type .
Please reward if useful -
IDOC message type LOIPLO not triggering
Hi Friends
Our client want to send firmed planned orders to External system through outbound IDOC LOIPLO
So we are using MF50 to firm the planned orders.
The idoc message type LOIPLO is not triggering.
How to trigger IDOC message type LOIPLO . What are the settings we have to do.
Regards,
Srihari.Mdear friend,
Message Type : LOIPLO
Basic Type : LOIPLO01
You need not create any custom IDOC type as we are having a standard IDOC type available within SAP, but you need to write a custom function module to read the data from the IDOC segments and then call the below BAPI to post the Planned Order.
Check the input parameters of BAPI and gothrough the documentation of the Basic Type in WE60 transactions, whether all the necessary input parameters of the BAPI are covered in the standard IDOC type, if not then we need to customize the standard basic type to meet the requirements.
Bapi which needs to be used is BAPI_PLANNEDORDER_CREATE
good luck! -
Hi,
Is there an IDoc message type for VL09 (Reverse Goods Issue) for Delivery. Do let me know please.
We are using an ECC 6.0 system (WebAS 700)
Regards,
AdityaHi,
You can use this message type MBGMCA, IDoc type MBGMCA01 and process code BAPI.
This process code will call FM IDOC_INPUT_MBGMCA to reverse good movements with MB_CANCEL_GOODS_MOVEMENT.
Regards,
Ferry Lianto -
ALE-IDoc : Outbound message control for MIRO,IDoc message type for INVOIC
Dear Experts,
I am using the IDoc message type INVOIC. For that i have created the new output type. Then i assinged the the Program RSNASTED and form routine ALE_PROCESSING.
But when i am saving the transaction in MIRO i am getting the Update Error like VN 056: Processing log for program RSNASTED
Please help me to rectify this problemHi Dharmendiran,
We also have the same requirement to send status acconf messages on Inbound INVOIC idoc posting..
Can you let me know how you went about creating new output type..did you mean new output type in NACE for application MR?
Thanks. -
LSMW with IDOC Message type COND_A and Basic type COND_A01
Hi Sap All.
in my project we using the LSMW with IDOC Message type COND_A and Basic type COND_A01 and now the requirement is to know the list of the tables which will be updated when i do the LSMW Migration with this IDOC Basic type.
i have tried to know the list of the tables updated by entering into the transaction we30 and looking at the segments E1KOMG,E1KONH, E1KONP,E1KONM,E1KONW and i found that the following below are the list of tables which gets updated when i populate the data into IDOC Message type COND_A and Basic type COND_A01.
KOMG,KONH,KONP,KONM,KONW.
please correct me if iam wrong.
regards.
VarmaHi Varma,
The tables mentioned by you definitely get updated, i guess you can add KONV to the list too, but to be a 100% sure, enable SQL trace and process an IDOC. Then you can look for Insert/Modify/Update statements to get a list of the tables that get updated.
Regards,
Chen -
Docu of Idoc message type CRMXIF_ORDER_SAVE_M02 for service request
Hi,
We are using the customer interaction center / service desk in CRM 7.0 and want to send service calls from other systems to our CRM service desk.
I've found that this should be possible via IDOC CRMXIF_ORDER_SAVE_M02.
Does someone has more documentation of this idoc message type (meaning of the fields, obligatory fields, ...) ?
Thank you,
StefanHi,
Go to we19 t-code, there give messgae type CRMXIF_ORDER_SAVE_M and then execute.
Next screein beside EEIDC double click and give send and receiver port.
After that clcck CRMXIF_BUSTRANS popup will open. Fill required fields.
Then expand CRMXIF_BUSTRANSA do the same for all.
After that click start oubound processing.
For more information go to SPRO->CRM->CRM middleware and related componets->exchange data with external components->XIF adapters then click OVERVIEW documentation help. Then click CRMXIF_ORDER_SAVE.
You will get the information on outbond as well as inobound.
Regards
Srinu
Edited by: sreenivasulareddy eragamreddy on Jul 10, 2009 7:45 PM -
How to chang the idoc message type
Hi,
I want to change the idoc message type...because the idoc has the status 51...pls advice how to change
I have tried it from we81 .......but i cant open the msg type ...when i double click on it.
Regards,
SomenathHi,
This may help u
Steps To Create Custom IDOC
1.Create Segment Type (WE31)
Go to Transaction code WE31
Enter Segment type, click on Create
Give Description
Enter the Necessary Fields & Data Elements for those Fields.
Save the Changes.
2.Create Idoc Type (WE30)
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
3.Create Message Type (WE81)
Go to transaction code WE81
Change the details from Display mode to Change modenAfter selection, the system will give this message u201CThe table is cross-client (see Help for further info)u201D. Press EnternClick New Entries to create new Message Type
Fill details
Save it and go back
4.Assign Idoc Type to Message Type (WE82)
Go to transaction code WE82
Change the details from Display mode to Change moden After selection, the system will give this message u201CThe table is cross-client (see Help for further info)u201D. Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Regards
Seshagiri -
IDOC message type for "Site" in SAP Retail module?
Hi All,
We have the need to transfer master data (through master data change pointers) of Retail Sites within the SAP Retail module (transaction: WB01, WB02). Does anyone know if there's an IDOC message/type already associated with this? Thanks in advance for your help!
Cheers,
MattHi,
please read SAP notes 892103 and 551035.
The correct IDOC type should be FIDCC1 / FIDCC2.
Best regards,
Andreas -
How to get the segment detials of IDoc message type.
Dear Friends,
I want to write function module , which takes the IDOC message type as an input and returns all the segment fields in response.
Basically I want to get the XML schema of a IDOC message type and need to expose these details toa 3rd party application to use.
Dear experts ,Please do give me some ideas how to achieve this .
like tables from where i can get these details or u feel any other goos way of doing the same.
thx,
jeevanHello experts,
Please participate .........
To redefine my objective I will say:--
I am trying to do some thing very similar that is there in XI .
You might have seen the way IDOCs are shown while mapping an idoc structure.
Its like you select a message type and u get all the list of Idoc Structure shown .
I am really relying on you people.
thx ,
jeevan
Maybe you are looking for
-
Authorization problems after upgrading MacBook Pro
I just purchased a new MacBook Pro (upgrading from 1st generation Intel MacBook Pro) and am unable to get working without the authorization message constantly popping up. I reauthorize (it says I am successful), but the songs (I purchased through iTu
-
Question uying an Apple TV in Japan and bringing it back to the US.
I currently live in Japan. I'm thinking about buying a Apple TV from a Amazon Japan. The Japanese Apple TV lacks some of the video services (as far as I know; no indication on Apple's description of the Japanese Apple TV that it has all of the US's v
-
Error's with BIPublisher reporting on JDE E1 tables - Request
Hello, I am trying to use BIPublisher 10.1.3.4 enterprise by creating a jdbc connection to JDE E1. The Data Access Server is setup and running. The jdbc connection is established to JDE E1 successfully. But when I try to create a SQL/Datamodel in the
-
How to display omega sign in string indicator
Hello, I want to print a omega sign in word report.
-
How can I create an app from a website?