Generate bar codes in smartforms

Hi,
I wonder to know how can I add bar codes to a smartform. Bar codes should be generated in a automatic sequence and its number should be printed too.
Thanks a lot,
Nuno Moreira

Hi Gregor,
Let me try to explain better.
1. I'm using the bar code in smartforms and I'm able to generate the bar code graphic. But I want to print the bar code graphic and the bar code number, so what I was asking is if there is some way to associate automatically the number with bar code graphic, instead of write the number again with a regular font format, because like this is very difficult to format properlly the graphic with the associated number.
2. What I want to do is, print daily several letters identified with a bar code, so it'll be nice if the system could generate a automatic sequence of number to convert in bar code graphics.
I hope you could understand my doubts.
Thanks again,
Nuno Moreira

Similar Messages

Generate bar codes in mail forms

Hi,
I know how to insert Bar codes in smartforms, but I need to print the bar codes in Mail Forms, is that possible?
Thanks a lot,
Nuno Moreira

Hi Gregor,
What I need to do is:
I have several mail forms treated as a standard response in ICWC. We are using the e-mail view (in ICWC) mainly to print the forms, via smartforms or in online mode without smartforms.
So, at the moment, I have two questions:
1) If I use a smartform to print the mail form, even if I create the form in plain text and create the bar code into mail form, when I print the number it is not converted in a bar code;
2) If I generate the bar code in a mail form and I try to print it in ICWC e-mail view the number is not printed as a bar code too;
Thanks a lot for your help and interest,
Best Regards,
Nuno

To print bar code in smartforms.

Hi,
I want to print bar code in smartforms. how to do that one.
Thanks ,
sanjukta

Hi,
There's another way of doing it. Here we go... You can generate an ITF file for your data from any third party softwares.
Once you have the ITF file, this is what you have got to do.
Uploading label file to SAPscript
1. Use the standard text editor (Transaction SO10) to upload the print file to SAPscript.
2. Create a new standard text with any name. In the text editor load the created print file
(.ITF file) with the function "Text->Upload" and select "ASCII" as a format. Store the ITF
print file as a standard text.
3. Include the standard text in your SAPScript.
4. Set up Device Type Generally, a special device type (a variant of the device type ASCIIPRI) must be used for the correct printout of the layout set on a label printer. SAP supplies these device types on the ftp server sapservX and delivers them in the standard SAP system. The device type ASCIIPRI can normally be used for the basic test of procedure with other label printers.
5. Define your output Device As the last step, an output device (printer) must be set up in the R/3 with Transaction SPAD. The special device type or ASCIIPRI is assigned to this output device (printer). The application program must now use this output device to print the labels. The label printer connects itself to the R/3 via one of the standard available connection types in SAP R/3 (local print on the application server/removed print via lpd server/removed print via Windows PC and SAPlpd/frontend print). Your thermal printer must be connected to one of the available output channels for print output.
6. What is the Barcode Symbology you are using? Upload method doesn't support EAN.UCC 128. But still there is workaround.
Feel free to revert back.
--Ragu

Generating Bar-code with barcode no.

Hi Experts,
          my requirement is to generate bar-code for data from certain fields like material no,batch no, expiry date etc. Well i am
          able to generate the bar-code with the help of smart style but i am not getting any no below the generated bar-code as
          bar-code no. As i have come across that there are basically 2 types of bar-code no. 1) UPC   and   2) EAN
          Please help me in generation of bar-code with its no below (either in UPC   or   EAN ) type.
Thanks.
Praveen Kumar.

Hi, Praveen,
I am more a barcode expart than SAP expert. Here is a link to an article that may be helpful:
[Printing barcodes from SAP|http://www.makebarcode.com/info/appnote/app_024.html]
You mentioned using UPC-A or EAN-13. I recommend that you do not use these symbologies for general-purpose fields like material no,batch no, expiry date etc. Both of these codes are fixed length, numeric only. It will be much better if you use a variable-length, alpha-numeric symbol like Code 39 or Code 128. Code 39 is the easiest to work with; Code 128 requires a little more work to set up your software, but it supports a wider range of characters (lower case, symbols, etc.).
Here is a link to a barcode comparison chart. From there you can find details about these codes.
[Barcode comparison chart|http://www.makebarcode.com/specs/barcodechart.html]
Bob

BAR CODES in smartforms - conversion problems to PDF

Hello,
I have a problem. Have a look at the following points and see what I have done:
1. I generated several different system bar codes using SM73
2. I added those system bar codes to a smartformstyle
3. and built a smartform using smartformstyle of system-bar codes.
4. then I made some examples of bar codes in the smartform as text.
5. next I sent this smartform via email as an pdf attachment using smartform mail functionality.
6. shocking - all bar codes in the pdf-file are not readable. You can see that there is a barcode placed, but all barcodes looks like the same.
Has somebody got a idea on what is going on here?
I already had a look at OSS Notes 430887 and 645158.
Greetings
daniel

Hi,
Please can you have a look at Sap OSS Note 197177.
Regards,
Sudheer.

Bar code in Smartforms

Hi experts
can u plz explain me how to bring bar code in to smartform like invoice credit notes
step by step procedure
regards
Siri

Hai Sireesha
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Details information about SAP Barcodes
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
Not to fear though, there are two ways to get around this:
- You can have your IT department do some research -
most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
- Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes.
- Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
Now you have a barcode printed - what next?
Well there are two options, depending on your business requirements:
- You can use an existing SAP transaction on a regular workstation and get a barcode wedge reader to hook up between the keyboard and the PC. These wedge readers comes in a wand or scanner format. There are even wireless wedge scanners available that allows you to roam a few yards from the workstation to scan a label. This approach is mostly used where you want to prevent human errors in typing in long material, batch or serial numbers in receiving or issuing of material. The problem is that it's just replacing the keyboard input and you are basically locked down in one location and have to bring all the material to that location to process.
- Another solution is to use SAPConsole transactions
or write your own ABAP Dialog programs that will fit onto a barcode enabled wireless handheld terminal and that will follow the business logic as executed on the shop floor.
These programs are highly complex exercises in industrial engineering and ergonomics because of the limited screen sizes and limited ability to accept keyboard input. The user is instructed step-by-step and only scan and push F-keys to interact with the SAP system. Scan, scan, beep, beep, enter - highly automated.
Barcode Standard
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Thanks & regards
Sreenivasulu P

Can I print Bar Code Text autoamatically under the bar code in smartform.

Hi All,
Currently I am printing the Bar Code for MARA-EANNR value .My requirement is to print the MARA-EANNR value under the bar code .Currently I am hardcoding and it is working fine.I want to know is there any possible way I can print the value of MARA-EANNR under the bar code with out hard coding.
Thnaks,
Suresh.

Hi,
B1 - BARCODE CHARACTER FORMAT
A1- DEFAULT CHARACTER FORMAT.
In smart form define a template with two rows,
in first row u pass barcode value( mat no ) with barcode character fomat.
<B1>&MATNO&</>
in second row define barcode value(mat no ) in ordinary charcter format.
<A1>&MATNO&</>
Rgds
Siva
Edited by: siva prasad on Sep 1, 2009 1:53 PM

How to generate Bar codes from Crystal Report

I understand that Bar Codes can be genrated from Crystal reports. I am using CR 2008 and trying to convert my Inventory items to bar codes. it does convert it and I can see the bar codes but it looks like; just a garbage and scanner does not recognze it plus the numners are missing @ the bottom.
Anybody has ever tried this and have some simple instructions to start with.
Any help will be appreciated highly.
Regards,

Hi,
What barcode are you using and what barcode font?
If you are using Code39 or Postnet then you need to make sure your values are formatted properly by creating a formula and using the barcode functions.
Have a search in the forum for barcodes. It's been talked about a lot and you should find your solution.
Good luck,
Brian

Bar Codes in Smartforms

Hi All
How can i print barcodes in my smartform ? do we have any functional modules to generate a barcode for a particular value ( for ex: PO NUmber )
thanks in Advance

Hi,
check the links
barcode printing in smartforms
Re: About printing barcode in SAP system using SmartForm
Regards,
anirban

How to find bar codes and mails to send clients in smartforms

HI friends,
How to find bar codes in smartforms and also how to send mail to the client. I have developed one object in smartforms, but i don't know how to send maill to the client. Pls help me........................
Thanks in Advance.
Saradhi.

Hi!
Here is the code to send the Smartform to mail as PDF attachment.
*& Report ZTEST_PDF_MAIL
REPORT ZTEST_PDF_MAIL.
Internal Table declarations
DATA: I_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
I_TLINE TYPE TABLE OF TLINE WITH HEADER LINE,
I_RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,
I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
WA_OBJHEAD TYPE SOLI_TAB,
W_CTRLOP TYPE SSFCTRLOP,
W_COMPOP TYPE SSFCOMPOP,
W_RETURN TYPE SSFCRESCL,
WA_DOC_CHNG TYPE SODOCCHGI1,
W_DATA TYPE SODOCCHGI1,
WA_BUFFER TYPE STRING, "To convert from 132 to 255
Variables declarations
V_FORM_NAME TYPE RS38L_FNAM,
V_LEN_IN LIKE SOOD-OBJLEN,
V_LEN_OUT LIKE SOOD-OBJLEN,
V_LEN_OUTN TYPE I,
V_LINES_TXT TYPE I,
V_LINES_BIN TYPE I.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZTEST'
IMPORTING
FM_NAME = V_FORM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
W_CTRLOP-GETOTF = 'X'.
W_CTRLOP-NO_DIALOG = 'X'.
W_COMPOP-TDNOPREV = 'X'.
CALL FUNCTION V_FORM_NAME
EXPORTING
CONTROL_PARAMETERS = W_CTRLOP
OUTPUT_OPTIONS = W_COMPOP
USER_SETTINGS = 'X'
IMPORTING
JOB_OUTPUT_INFO = W_RETURN
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I_OTF[] = W_RETURN-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
IMPORTING
BIN_FILESIZE = V_LEN_IN
TABLES
OTF = I_OTF
LINES = I_TLINE
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
ENDIF.
LOOP AT I_TLINE.
TRANSLATE I_TLINE USING '~'.
CONCATENATE WA_BUFFER I_TLINE INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
I_RECORD = WA_BUFFER.
APPEND I_RECORD.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Attachment
REFRESH: I_RECLIST,
I_OBJTXT,
I_OBJBIN,
I_OBJPACK.
CLEAR WA_OBJHEAD.
I_OBJBIN[] = I_RECORD[].
Create Message Body Title and Description
I_OBJTXT = 'test with pdf-Attachment!'.
APPEND I_OBJTXT.
DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
READ TABLE I_OBJTXT INDEX V_LINES_TXT.
WA_DOC_CHNG-OBJ_NAME = 'smartform'.
WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
WA_DOC_CHNG-SENSITIVTY = 'F'.
WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
CLEAR I_OBJPACK-TRANSF_BIN.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
I_OBJPACK-BODY_NUM = V_LINES_TXT.
I_OBJPACK-DOC_TYPE = 'RAW'.
APPEND I_OBJPACK.
Attachment (pdf-Attachment)
I_OBJPACK-TRANSF_BIN = 'X'.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
READ TABLE I_OBJBIN INDEX V_LINES_BIN.
I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
I_OBJPACK-BODY_NUM = V_LINES_BIN.
I_OBJPACK-DOC_TYPE = 'PDF'.
I_OBJPACK-OBJ_NAME = 'smart'.
I_OBJPACK-OBJ_DESCR = 'test'.
APPEND I_OBJPACK.
CLEAR I_RECLIST.
I_RECLIST-RECEIVER = '[email protected]'.
I_RECLIST-REC_TYPE = 'U'.
APPEND I_RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.
If you want to send some text as Body of the Mail then follow this once
when u r callin the FM'SO_NEW_DOCUMENT_ATT_SEND_API1'.. points to remember
1.u have to pass the body of content in table CONTENTS_TXT(ia m using I_OBJBIN) (each line a record) then. suppose i have appended 11 records to the table CONTENTS_TXT .
2.PACKING_LIST(iam usign I_OBJPACK) table u ahve to append a redord as follows
I_OBJPACK-TRANSF_BIN = ' '.
I_OBJPACK-HEAD_START = 000000000000001.
I_OBJPACK-HEAD_NUM = 000000000000001.
I_OBJPACK-BODY_START = 000000000000002
I_OBJPACK-BODY_NUM = 000000000000010.
I_OBJPACK-DOC_TYPE = 'RAW'.
append I_OBJPACK-.
by the above code system treat the first line in table I_OBJBIN as header and the 2nd line to 10 lines tread as body.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
Regards
Tamá

Adding bar codes to printer device for smartforms pdf conversion?

Hello friends,
I would like to send a smartform as a pdf to an email recipient. The smartform shows some bar codes. The send process workes fine. But the bar codes doesn't appear on the pdf correctly. Therefore I would like to add bar codes to the printer device type in transaction SE73.
Does somebody know the device type for smartforms pdf conversion? Or how can I add bar codes to smartforms pdf conversion process?
greetings
daniel

Hello Denial,
Try these links, this might solve ur problem
http://www.tec-it.com//documentation/TBarCodeSAPLPD_EN.htm
http://www.mecsw.com/info/appnote/app_024.html
if you need any more information send me at [email protected]
Thanks & Best Regards
Ankur Jain

To print 3 different bar codes on the same page in SMARTFORMS

Hi,
I want to print three different bar codes (HU) per page instead of one in Smartforms. I need to change the print program but I don't know where?
can you help me plz

Hi,
To display Bar Codes in smartforms you need to create charecter format in smartsyles:
Example :
Charecter Format :BC
Description : Bar Code
Bar code Name : C128A
And next insert two text node in the tempalte
1. &value1& type BC for dispalying barcode lines
2. &value1& type any for dispalying values for the barcode.
This way you can display the values in form of barcodes.
Regards,
Dep

How to print BAR code in SMART Form

Hi All,
I have the requirement to print BAR CODE in Smartforms.
For this, I create a character format with Bar code in style forms and create a text element in Smart form and associate bar code character format with this text element.
Now when I look the print preview for the data, then it shows me data in bar code format but not in right format i.e. its shows me all the similar block in bar code.
If you look the bar code in SAP script, its always show you bar code with similar block, but in SMART FORM it will show you exact bar code; as in SAP Script, bar code is generated at printer end and in SMARTFORM bar code is generated as graphic in SAP and then sent to printer for print.
PLease let me know, why in SMARTFORM its not showing BAR CODE in correct format in print preview.
Thanks
Piyush Mathur

Hi,
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Detailed information about SAP Barcodes
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
reward if useful
regards,
ANJI

Bar code Generation in ABAP report

Hi,
Can anyone help me on how to generate bar code in ABAP report output.
My exact requirement in the exisiting 'Z' report,I need to generate Bar code for Sales order which is displaying in report output.Buisness will scan and they will use for further processing.The Device type is HPLJ5SI printer.
If possible please provide code for generating Bar code in ABAP report.
Since its very urgent, if anyone provide solution quickly it will be great helpful.
Thanks,
Senthil

internal table validation
Check here mate, should be helpful.
Mano sri

Bar Code works fine in one App Svr, but does NOT work in identical server?

We use the FREE3OF9.TTF bar-code to generate bar codes. We tested on this http://www.freeimagehosting.net/uploads/7c901bc198.gif development environment and it works fine.
Problem is, when we install the font and report in the live environment, which is IDENTICAL to the above dev. environment the bar-code does not appear. Only the number appears.
If you change another font in the report and deploy, the report shows the new font in the live env., but only the bar-code font it does not pick up.
I even tried font sub-setting in the app server but even that failed.
In the app server the bar code is displayed if you use it in Wordpad.
Problem is the App Server does not pick up ONLY the bar-code font (all other fonts it picks up)?
What could be the issue?

Hello
have you rebooted the Windows server ?
by default , the Reports Server is running as a Windows Service and Windows Services inherit resources defined at the boot.
Regards

Generate bar codes in smartforms

Similar Messages

Maybe you are looking for