Generate Export datasource for planning area

Hi,
we are using SCM 4.0 version for running Demand planning.
i have one strange problem. that is, to generate export data source for planning area, there is no option when
right clicking on planning area(context menu).is this option is available somewhere else?. please give me a clue on how to generate export datasource for planning
area in version SCM 4.0? or do i need to do some configurations?.
Thanks in advance
Ramakrishna

Hi,
You may try the following:
1) From the menu: Demand Planning->Environment->Current Settings->Administration of Demand Planning
2)From the list of planning areas, double click your Planning Area to display your planning area setup
3) Then from go to the menu Extras->Generate Datasource
Hope this helps.

Similar Messages

Generating export datasource for an info object

Hello Guys
I am working on BW 3.5. I need to generate an export data source for an infoobject so that I can load its texts into another target IO. When I go into the infosources tab, and right click on the particular IO, it gives me the option of creating an export data source.
My question is: How do i transport this data source from DEV --> QA? Do we have to re-create the export data source in each system individually, ie DEV, QA and PROD.
Secondly, when I could see the export data source in the the BWQ source system, i tried moving the transfer rules for the DS to the target IO and it gave an error.
Error message:
Mapping between data source 80CRED_GROUPT and source system BWQCLNT100 is inconsistent
Field CRED_GROUP will not be delivered from DataSource 80CRED_GROUPT in source system BWQCLNT100
Field C_CTR_AREA will not be delivered from DataSource 80CRED_GROUPT in source system BWQCLNT100
Field LANGU will not be delivered from DataSource 80CRED_GROUPT in source system BWQCLNT100
Field TXTMD will not be delivered from DataSource 80CRED_GROUPT in source system BWQCLNT100
Why is this happening? And as i asked before, can i transport an export DS or do I create it in each environment individually? Please note: This is an export DS for an info object.

Hi Srinivas,
You can transport the export data source across the landscape(Dev to QA).
You do not eed to generate it in each system.
Also ensure that the conversion of logical system names or the source system names has been maintained.
You are right it looks like the data source creation was a problem hence it is not alllowing importing transfer rules.
You may try to recollect the export data source and transport and then once it is transported successfully replicate metadata of the self system.
Now transport the transfer rules.
Hope it works out,
Best regards,
Sunmit.

Error while generate export datasource.

Hi Experts,
APO - 3.0A(BW-2.0A)
In APO while creating generate export datasource for a cube, I am getting the following error.
Creation of InfoSource 8XXX for target system BW 1.2 failed - Message no. RSBM 026
Diagnosis - Failed to create InfoSource &v1& for target system BW 1.2.
System Response -
The InfoCube cannot be used as a data mart for a BW 1.2 target system.
Any help is highly appreciated.
Thanks&Regards,
VJ

Thanks Rebort,
Just now I completed it after searching for OSS note. Anyhow thanks for you help too.
Now I am facing a different problem. The generated DM infosource is not available under InfoSource - DM.
I have changed the ODS setting from Hide to Show
also InfoSources - RC - insert lost nodes..
no luck.. any suggestion
Regards,
VJ
Message was edited by: Vijay Kumar

Generating Export DataSource

Greetings Y'all!
Can anyone tell me what the purpose for generating Export DataSources are for and what the specific sequence of steps are to generate Export DataSources?
Thank you!
Philips Manalaysay

Hi
If you want to upload a cube from another cube or from ODS the source ODS of cube should have generated export datasource. This enables the CUbe or ODS to act as source for someother Cube to feed the data
To Generate export data source Right click on the cube and in the menu Generate export datasource.
Regards
N Ganesh

Loading master data from another infoObject (generate export datasource)

Hi All,
We are using a 0MATERIAL that is loaded every day, and we would like to use another infoObject that contains data updated every end of last month (and ont daily).
For instance, on 15th april, we would like use data from 31th march and not 15th april.
We saw that we could use "Generate export datasourse" from 0MATERIAL to the nex infoObject.
1) Is there the best solution?
2) If yes, could you explain us how to do this (generate export datasource), because we didn't do this?
3) Do we do this from InfoObject (0MATERIAL) or Infosource?
Thank you.
Edited by: Radjech Radjech on May 11, 2009 10:44 AM

Hi,
Check : [Generating the Master Data Export DataSource|http://help.sap.com/saphelp_nw04/helpdata/EN/11/1a5038d2c1ba03e10000009b38f8cf/frameset.htm] to generate export datasouce.
If MATERIAL is time dependent data then, Use To Date field as selection(31st March) to load data into new infoobject. Restict at infopackage level.
Srini

Do we need generate export datasource in BI

Hi
We are loading 3 standard datasources to PSA and PSA to 3 DSOs and 3DSOs to one consolidated DSO and we have not generated export datasources we are able to load the data, my question is when we use generate export data source.
Thanks
Kore

Hi
As per the business requirement for a multiple BI connections we need DATAMART technology and for standalone BI we donu2019t need Datamart technology (generate export datasource)
check these thread .
What is GENERATE EXPORT DATASOURCE
https://forums.sdn.sap.com/click.jspa?searchID=10732071&messageID=4737568
Generate Export datasource BI 7
Regards
Padmanabha

What is GENERATE EXPORT DATASOURCE

Hello gurus,
When we right click on Master data infosource we have a option like GENERATE EXPORT DATASOURCE, so what is the significance of that and what actually happens when we press that.
I ll surely award points.
Thanks

Dear Khanna,
When u click on export data source option, system generates a infosource.
Actually this is required when u want to send data from one infoprovider to another infoprovider in same system or in external BIW system.
In practice some times need comes for sending data from one target to another target. In this situation this is required. Many times u first load data in to ODS and then u send it to cube, this is the typical case you need export data source.
Once you click this, system created infosource from the same. useing this infosource and creating update rule u can load data in to another target.
Hope this answers your question.
regards,
Mahendra Sane

Generate Export DataSource from InfoCube In Production System

Software component : BI release 7.0 SP 18
Dear Gurus,
we have a strange situation in our production system from a month till now.
We want to generate an export data source from an infocube to load data into another one but now when we try to generate in prod ( right click on infocube and select "Generate Export DataSource" ) we can't create anymore.
Following message appears :
no changes to repository and cross client customizing object allowed
and the generation is stopped.
We always did it in production system in the same way as in the other system and then transported the update rule or transformation, but now it seems that is no more possible.
No setting has been changhed in SCC4 and in object changeability. Maybe is an authorization problem or is due to any other setting?
Does anybody has a way to solve this problem?
<removed by moderator>!
Kind Regards
Stefano
Edited by: Siegfried Szameitat on Nov 24, 2008 4:18 PM

Hi Stefano,
If you want to generate an export datasource you ask your basis team to open the system so that you can do.
As per the Sap Best Practise you can do the export datasoorce in your development system and move it to the quality and after testing you transport to Production.
Generallly if you can look in to production authorizations you may have only some operation like to display only.SOme times basis may give authorizations like creation of DTP and Infopacks like that.
Regards

Creating data source for planning area

Hi Experts,
Can you please help me by providing steps to create data source for planning area.
Thanks in advance for your help.
Regards,
Brahma

Hi Brahma,
Please follow below link....
http://help.sap.com/saphelp_scm50/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
Hope this may help
Regards,
Harshil Desai

Error in generating export datasource

Hello Experts!!
I have generated export data source for an infocube. The system created the data source.
Now i implemented an SAP provided exit in the datasource, due to which one new field 0BCS_REFYP7 is added to the communication structure. This field has the property "Only visible in user exit" set. This field is only added to the datasource and not to the infocube.
Now when i try to assign the 8xxxxx system generated infosource to this datasource, the system throws an error. Because it tries to map this field to a company code field.
So, the condition is, this field is there in the datasource communication structure, but not in the infosource. So, while generating the transfer rules, it gives error.
The error says:
The following errors occured when saving mapping:
Field BCS_REFYP7 will not be delivered from datasource XXXXX in source system XXXXXX.
The data type of infoobject 0BCS_REFYP7 is incompatible with field 0COMPANY.
Can anybody suggest how this can be reslved?? Full marks are assured..
Regards,
Vikas Bittera.
Can anybody suggest

Hi Srinivas..
Thank you very much for the response..
Actually the error is not due to the Enhancement. As i am trying in a server, where the cube is without this enhancement.
Neither the cube nor the datasource have the enhancement field. And their structure is also same..
But even after replicating and generating the datasource, The system does not create the transfer rules.
In rsa1, if i goto infosources, and click to see the transfer rules.. It gives me error "Formula is not available in the table RSAFORMMAP".
Please help me!!
Thanks and Best Regards,
Vikas Bittera.
**Usefull answers will surely be rewarded**

Error in generating data source from planning area

Hi experts! I have an error while making data source from planning area:
after the screen when i fill in the data source name (Window name: Generate export data source) i have the SYNTAX_ERROR Message:
Syntax error in program /sapapo/cl_im_extract_ex======cp
the main reason: the type /BI0/9A0IVWKNDGD is unknown
what you can suggest to solve this problem?
Thanks.

Dear Andrey Kudriavzev,
The reason is the program is trying to use the datatype '/BI0/9A0IVWKNDGD' which does not exist in the system.
Go SE11 to cross check if it exists. Check dataelement radiobutton -> enter /BI0/9A0IVWKNDGD -> Choose display option. You would need to create this datatype in the system. I feel there must some OSS Note related to this.
Search for an OSS Note. Raise one if you cannot find the relevant notes.
Regards,
Naveen.

Error while generating export datasource in Test and Prod system

Hi experts,
I tried to generate export datasorce on a cube in teh testing system so that i can use this as a datasource for another cube. I did this so that i can transport all teh relevnt objects from D to T. But Iam gettin teh following erro msg
System setting does not allow changes to be made to object ISTD 80CRM_PRI.
while Prod system produces teh follwoing error msg
Changes to Repository or cross-client Customizing are not permitted
Choose 'Display object' or 'Cancel'.
After i have done this and when i go to the context menu of teh infocube i can see maintain export datasource option.
Also I couldn't see the infosource generated in Infosources ( FYI I have already done display generated objects under settings)
Can anyone tell me how to proceed further.
Thanks,
DV

Hi DV,
Generally export datasource are not included in the request from the test server. It gets generated automatically when (ODS,Cube) based on which the datasource s transported to production / quality .
I think solution should be try not to include export datasource, infosource ,transfer rules to request from dev server.
Hope that helps.
Regards
Mr Kapadia

Generate Export Datasource

Hi All,
While activating an ODS object, I got the error The creation of the export datasource failed. I tried activating the entire source system and replicated it. But still I am facing this issue. I checked the ODS in RSRV also. There it gave me the error Number of rows for active program and temporary program are different". I am facing this issue for newly created ODS objects also.
Can someone throw some light on this?
Thanks in advance,
Febina

Hi Febina Mohanan
Welcome to the board..
There are few considerations with your issue
1)Occured Because of Space issue Just check the space statistics in DB02 with the help of BASIS
2) Connectivity..
3) Just try in rsa1 Settings--->display Generated Objects >selct show generated objects->Continue..
4) Activate u r ds with the programe "RS_TRANSTRU_ACTIVATE_ALL"
Hope this will help...
Regards
R M K
Assining points is the only way of saying thanx in SDN ***

APO- BI Datasource from Planning Area

Hi All,
I need help with APO-BI datasource generated from Planning Area.
In the Dev environment we had two clients:
DCLNT020 (Holds APO part) DCLNT010 (Holds BI workbench).
So a datasource was generated from the Planning area in DCLNT020 --> it was replicated in DCLNT010 --> data from Planning Area was extracted to BI cube using this.
Now we transported this datasource to the Test environment which has only one client (TCLNT010). I maintained the Source to target mapping there such that DCLNT020 -- TCLNT010 and DCLNT010 -- TCLNT010.
However the Transport fails and the error message is:
Cannot replicate DataSource
Errors occurred during post-handling RS_AFTER_IMPORT for ISFS L
If I go to the Test system and try to generate the transported Datasource directly from the Planning area again, it says this DataSource already exists. However I cannot see this datasource in the system even after replicating and refreshing multiple times.
Please provide your inputs as to what might be wrong and hat I need to do to solve this.
TIA
Amrita

Hi Amrita Goswami
Based on the above post it seems to be your maintain two clients in Dev one is for creation and another is for testing and when it comes to test environment your maintain only one client and maintain the DS in one it wont give any impact..
Based on the error
> +Cannot replicate DataSource+
> +Errors occurred during post-handling RS_AFTER_IMPORT for ISFS L+
There could be two reasons
1) Needs to replicate the data source once you have imported it to test environ ment and than ran the program "RSDS_DATASOURCE_ACTIVATE_ALL" by giving the name of the source and DS name if its BI 7.0
If its 3.x then have to execute the program :"RS_TRANSTRU_ACTIVATE_ALL" By specifying the transfer structure name.
2) RS_AFTER_IMPORT in some cases its because of improper transport of the update rules.
Solution would be recollect the transport and release the DS transport first and execute the ( 1)Activities and then transport the remaining._
Hope its clear a little..!
Thanks
K M R
***Even if you have nothing, you can get anything.
But your attitude & approach should be positive..!****
>
Amrita Goswami wrote:
> Hi All,
> I need help with APO-BI datasource generated from Planning Area.
>
> In the Dev environment we had two clients:
>
> DCLNT020 (Holds APO part) DCLNT010 (Holds BI workbench).
>
> So a datasource was generated from the Planning area in DCLNT020 --> it was replicated in DCLNT010 --> data from Planning Area was extracted to BI cube using this.
>
> Now we transported this datasource to the Test environment which has only one client (TCLNT010). I maintained the Source to target mapping there such that DCLNT020 -- TCLNT010 and DCLNT010 -- TCLNT010.
>
> However the Transport fails and the error message is:
> Cannot replicate DataSource
> Errors occurred during post-handling RS_AFTER_IMPORT for ISFS L
>
> If I go to the Test system and try to generate the transported Datasource directly from the Planning area again, it says this DataSource already exists. However I cannot see this datasource in the system even after replicating and refreshing multiple times.
>
> Please provide your inputs as to what might be wrong and hat I need to do to solve this.
>
> TIA
> Amrita
Edited by: K M R on Feb 6, 2009 12:03 PM
Edited by: K M R on Feb 6, 2009 12:18 PM

Generate Export Datasource in Production

Hi All,
We have transported our cubes to PRoduction system. When I try to generate export data source I get an error
Changes to Repository or cross-client Customizing are not permitted.
I have set the system change options in SE06 and SE03 as modifable for Customer Name space and SAP name space.
I dont want to open the client for this purpose. because this may be a repitive process and we need to open the production client every time.
Can anybody give their thoughts on this.
Thanks in Advance,
Best Regards,
PV

Hi Stefano,
If you want to generate an export datasource you ask your basis team to open the system so that you can do.
As per the Sap Best Practise you can do the export datasoorce in your development system and move it to the quality and after testing you transport to Production.
Generallly if you can look in to production authorizations you may have only some operation like to display only.SOme times basis may give authorizations like creation of DTP and Infopacks like that.
Regards

Generate Export datasource for planning area

Similar Messages

Maybe you are looking for