Generate Interface Documentation

Hello all,
could you tell me where i can find information regarding with SAP PI Interface Documentation. How can i generate reports of created objects, interfaces, scenarios if i have documented them in IR and ID? Is there any guide i can use to document my interfaces? Can this documentation be published as a HTML resource?
Thank you in advance.

Are you talking about the technical + functional document that we prepare for an interface developed in SAP XI/ PI? If yes, then have a look at this section:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/86bdc490-0201-0010-b9a2-b98373ea4dc4
Normally such documents are hosted in a server which has a user interface....this user interface has a link which refers to the actual document.....a search kind of functionality.
May be a search on SDN can help you further.
Regards,
Abhishek.

Similar Messages

Unable to Generate Printed Documentation in PDF Format

This past week I started having a consistent error when attempting to generate a Printed Documentation layout. This error reads "Internal error encountered, Failed to generate Printed Documentation." Prior Printed Documentation builds on this same project completed fine. Nothing was done to the Help project between the times when this worked and when it no longer was able to create Printed Documentation.
I receive this error even if I generate an entirely new "blank project" build, and then attempt to create a Printed Documentation build from this new blank project. Researching this error, I see this has been a reoccuring problem with this product for some time. The few threads that list the problem as having been "fixed" provide resolution steps that have not worked in my case. Right now I am waiting for our IT Helpdesk people to re-install the Suite. Hopefully this will resolve this problem.
Additional information on this problem - PDF Printed Documentation is failing - the HTML build works fine. If I select just a .DOC Printed Documentation output, this also works correctly. The resulting Word document looks good, although hyperlinks do not work within this Word document. I have reloaded Office 2003 as a troubleshooting effort, but this has nbot resulted in any change in symptoms.
The entire error text is enclosed below, although several other people have also done this in past entries. The few lines that read "Warning, and then report a style issue is NOT the problem here. As stated earlier, when I do this same Printed Documentation build on an entirely new "blank project" it does not work, and the Output text in that case does not contain any such "Warnings" about Styles.
Error text below:
Starting to build Printed Documentation...
Printed Documentation processor 8.0.1.204
Building C:\Documents and Settings\tcleary\My Documents\My RoboHelp Projects\Adobe RoboHelp 8\10515-0366-5004_7800v-hh rsp\!SSL!\Printed_Documentation.doc ...
Preparing to create Printed Documentation...
Clearing output folder...
Preparing files for Print Document...
Copying files...
Updating files...
Finished preparing in 2 seconds.
Preparing environment...
Printed Document Generator Environment: Word 11.0.8313, OS 5.1.2600, RAM 2048 M Bytes
Building Printed Documentation 'Printed Documentation'...
Building Single Document 'Printed_Documentation.doc'...
Building 'RF-7800V-HH About this Help'...
Building 'Table of Contents'...
Preparing to build chapters...
Building 'RF-7800V-HH Help and Support'...
Processing 'RF-7800V-HH Welcome'...
Building 'RF-7800V-HH RSP Help'...
Processing 'RF-7800V-HH Station Information'...
Building 'RF-7800V-HH Features'...
Processing 'RF-7800V-HH Features'...
Processing 'RF-7800V-HH Anc. Connector Mode'...
Processing 'RF-7800V-HH No-Sync Beeps'...
Processing 'RF-7800V-HH Power Management'...
Processing 'RF-7800V-HH Retransmit'...
Processing 'RF-7800V-HH USB Mode'...
Processing 'RF-7800V-HH Broadcast Gateway'...
Processing 'RF-7800V-HH IP Routing'...
Processing 'RF-7800V-HH Voice Settings'...
Processing 'RF-7800V-HH Time and Date Settings'...
Processing 'RF-7800V-HH Position Reporting'...
Processing 'RF-7800V-HH User Interfaces'...
Processing 'RF-7800V-HH Net Switches'...
Processing 'RF-7800V-HH Ethernet Interface'...
Building 'RF-7800V-HH Global Settings'...
Processing 'RF-7800V-HH Global Settings'...
Processing 'RF-7800V-HH Radio Passwords'...
Processing 'RF-7800V-HH GPS'...
Processing 'RF-7800V-HH Locksets'...
Building 'RF-7800V-HH Network Types'...
Processing 'RF-7800V-HH Network Types'...
Building 'RF-7800V-HH Fixed Frequency LOS'...
Processing 'General Information - Fixed Frequency LOS'...
Processing 'RF-7800V-HH FF Network Information'...
Processing 'RF-7800V-HH FF Preset'...
Processing 'RF-7800V-HH FF General'...
Processing 'RF-7800V-HH FF Comsec'...
Processing 'RF-7800V-HH FF Data-Voice'...
Processing 'RF-7800V-HH FF Squelch'...
Processing 'RF-7800V-HH FF Advanced'...
Warning: style (p.Heading7) is not defined and will be mapped to 'Normal'.
Building 'RF-7800V-HH Quicklook'...
Processing 'General Information - Quicklook'...
Processing 'Hopset Creation - Quicklook'...
Processing 'RF-7800V-HH QL Network Information'...
Processing 'RF-7800V-HH QL Preset'...
Processing 'RF-7800V-HH QL General'...
Processing 'RF-7800V-HH QL Comsec'...
Processing 'RF-7800V-HH QL Data-Voice'...
Processing 'RF-7800V-HH QL Advanced'...
Building 'RF-7800V-HH Sample Plans'...
Processing 'General Information - Sample Plans'...
Processing 'Simple Fixed and Quicklook Nets'...
Processing 'Single Fixed and Quicklook Nets'...
Processing 'RF-7800V-HH Manage Keys'...
Processing 'RF-7800V-HH Program Radio'...
Building 'RF-7800V-HH Tech Support'...
Processing 'RF-7800V-HH Technical Support'...
Processing 'RF-7800V-HH Radio Firmware Compatibility'...
Building 'FAQs'...
Processing 'RF-7800V-HH FAQ Index'...
Processing 'FAQ 01'...
Warning: style (span.strong) is not defined and will be removed.
Warning: style (p.para) is not defined and will be mapped to 'Normal'.
Processing 'FAQ 02'...
Processing 'FAQ 03'...
Processing 'FAQ 04'...
Processing 'FAQ 05'...
Processing 'RF-7800V-HH Glossary'...
Warning: style (p.FM_CellRowHead) is not defined and will be mapped to 'Normal'.
Warning: style (span.Glossary) is not defined and will be removed.
Warning: style (p.FM_CellBodyLeft) is not defined and will be mapped to 'Normal'.
Warning: style (p.FM_GLOSSARY) is not defined and will be mapped to 'Normal'.
Warning: style (p.FM_Para) is not defined and will be mapped to 'Normal'.
Completed building chapters...
Building 'Index'...
Updating list paragraphs...
Updating images...
Updating page numbers...
Updating page headers...
Updating Table of Contents...
Updating Index...
Saving 'Printed_Documentation.doc'...
Generating 'Printed_Documentation.pdf'...
Failed the generate PDF file 'C:\Documents and Settings\tcleary\My Documents\My RoboHelp Projects\Adobe RoboHelp 8\10515-0366-5004_7800v-hh rsp\!SSL!\Printed_Documentation.pdf'...
Failed to save 'Printed_Documentation.doc'...
Cleaning up temporary files...
I am pretty sure nobody will have any fix suggestions that work to solve this problem, but I am making this entry for historical purposes. I will add an entry stating whether the Suite reload resolves this issue.
Thanks,
Tim C @ Harris

If I select ONLY the Word DOC Output format in the Printed Documentation
setup, the output is created without an error (output text below). Links do work within
this Word document (a symptom change since installing patch 8.0.2).
When I use this Word document to create a PDF (using the Adobe PDF
printer driver) a PDF is successfully created, however no bookmarks are
created in the bookmarks panel and none of the links in this PDF work
(although they are created looking like they will work, i.e., blue
underlined text).
Regards,
Tim
------------- Output Text --------------------------
Starting to build Printed Documentation...
Printed Documentation processor 8.0.1.204
Building C:\Documents and Settings\tcleary\My Documents\My RoboHelp Projects\Adobe RoboHelp 8\10515-0366-5004_7800v-hh rsp\!SSL!\Printed_Documentation.doc ...
Preparing to create Printed Documentation...
Clearing output folder...
Preparing files for Print Document...
Copying files...
Updating files...
Finished preparing in 3 seconds.
Preparing environment...
Printed Document Generator Environment: Word 11.0.8313, OS 5.1.2600, RAM 2048 M Bytes
Building Printed Documentation 'Printed Documentation'...
Building Single Document 'Printed_Documentation.doc'...
Building 'RF-7800V-HH About this Help'...
Building 'Table of Contents'...
Preparing to build chapters...
Building 'RF-7800V-HH Help and Support'...
Processing 'RF-7800V-HH Welcome'...
Building 'RF-7800V-HH RSP Help'...
Processing 'RF-7800V-HH Station Information'...
Building 'RF-7800V-HH Features'...
Processing 'RF-7800V-HH Features'...
Processing 'RF-7800V-HH Anc. Connector Mode'...
Processing 'RF-7800V-HH No-Sync Beeps'...
Processing 'RF-7800V-HH Power Management'...
Processing 'RF-7800V-HH Retransmit'...
Processing 'RF-7800V-HH USB Mode'...
Processing 'RF-7800V-HH Broadcast Gateway'...
Processing 'RF-7800V-HH IP Routing'...
Processing 'RF-7800V-HH Voice Settings'...
Processing 'RF-7800V-HH Time and Date Settings'...
Processing 'RF-7800V-HH Position Reporting'...
Processing 'RF-7800V-HH User Interfaces'...
Processing 'RF-7800V-HH Net Switches'...
Processing 'RF-7800V-HH Ethernet Interface'...
Building 'RF-7800V-HH Global Settings'...
Processing 'RF-7800V-HH Global Settings'...
Processing 'RF-7800V-HH Radio Passwords'...
Processing 'RF-7800V-HH GPS'...
Processing 'RF-7800V-HH Locksets'...
Building 'RF-7800V-HH Network Types'...
Processing 'RF-7800V-HH Network Types'...
Building 'RF-7800V-HH Fixed Frequency LOS'...
Processing 'General Information - Fixed Frequency LOS'...
Processing 'RF-7800V-HH FF Network Information'...
Processing 'RF-7800V-HH FF Preset'...
Processing 'RF-7800V-HH FF General'...
Processing 'RF-7800V-HH FF Comsec'...
Processing 'RF-7800V-HH FF Data-Voice'...
Processing 'RF-7800V-HH FF Squelch'...
Processing 'RF-7800V-HH FF Advanced'...
Warning: style (p.Heading7) is not defined and will be mapped to 'Normal'.
Building 'RF-7800V-HH Quicklook'...
Processing 'General Information - Quicklook'...
Processing 'Hopset Creation - Quicklook'...
Processing 'RF-7800V-HH QL Network Information'...
Processing 'RF-7800V-HH QL Preset'...
Processing 'RF-7800V-HH QL General'...
Processing 'RF-7800V-HH QL Comsec'...
Processing 'RF-7800V-HH QL Data-Voice'...
Processing 'RF-7800V-HH QL Advanced'...
Building 'RF-7800V-HH Sample Plans'...
Processing 'General Information - Sample Plans'...
Processing 'Simple Fixed and Quicklook Nets'...
Processing 'Single Fixed and Quicklook Nets'...
Processing 'RF-7800V-HH Manage Keys'...
Processing 'RF-7800V-HH Program Radio'...
Building 'RF-7800V-HH Tech Support'...
Processing 'RF-7800V-HH Technical Support'...
Processing 'RF-7800V-HH Radio Firmware Compatibility'...
Building 'FAQs'...
Processing 'RF-7800V-HH FAQ Index'...
Processing 'FAQ 01'...
Warning: style (span.strong) is not defined and will be removed.
Warning: style (p.para) is not defined and will be mapped to 'Normal'.
Processing 'FAQ 02'...
Processing 'FAQ 03'...
Processing 'FAQ 04'...
Processing 'FAQ 05'...
Building 'RF-7800V-HH Glossary'...
Warning: style (p.FM_CellRowHead) is not defined and will be mapped to 'Normal'.
Warning: style (span.Glossary) is not defined and will be removed.
Warning: style (p.FM_CellBodyLeft) is not defined and will be mapped to 'Normal'.
Warning: style (p.FM_GLOSSARY) is not defined and will be mapped to 'Normal'.
Warning: style (p.FM_Para) is not defined and will be mapped to 'Normal'.
Completed building chapters...
Building 'Index'...
Updating list paragraphs...
Updating images...
Updating page numbers...
Updating page headers...
Updating Table of Contents...
Updating Index...
Saving 'Printed_Documentation.doc'...
Completed building Printed Documentation...
Preparing output directory...
Cleaning up temporary files...
Finished Printed Documentation generation in 5 minutes 36 seconds.
Building Printed Documentation complete.

Unable to generate printed documentation

I am running RoboHelp 9 HTML using Microsoft Word 2010 on a Windows 7 machine.
Whenever I try to generate printed documentation using a single source layout that is set up for generating either a .docx file or a .doc file the program hangs up after printing the output message "Processing Topics". This occurs with the simple "Test" sample provided by Adobe that contains only one topic as well as with a more complicated project.
I read some posts that said things about anti-virus software that may affect RoboHelp. On my system the security department at my company has control of that, so I am not really sure what anti-virus software I have. When I look in my "All Programs" list under the "Start" menu, I do not see any anti-virus software programs except something called "System Center 2012 Endpoint Protection". I believe this is the anti-virus software that the security department uses, and there is an icon for it in my System Tray. Has anyone ever heard of issues involving that software and RoboHelp?
Meanwhile any other insights any of you may have into this problem would be greatly appreciated.

Are you generating to a local drive or a network drive? If the latter, try the former.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Visual C++ runtime library error when generating printed documentation from RH9

I just upgraded a project from RH 7 to RH 9. I tried generating printed documentation in Word from it, but as soon as the Printed Documentation dialog opened, a Visual C++ Runtime Library error displayed. RoboHelp stopped working and I had to restart.
I tried using one of the sample projects -- same thing happened.
I then created a brand-new project. This time, opening the Printed Documentation dialog worked. I selected "Generate Word Doc" and the .docx extension, since I have Word 2010, and tried to generate printed documentation. However, the following message then displayed: Cannot find Microsoft Word installed on your system.
So I have two questions:
- How can I avoid crashing RoboHelp when generating printed documentation?
- How can I ensure that RoboHelp finds the Word 2010 installation on my system?
Thanks for any help!
OK, just played around a bit more and I was able to help myself on the first question:
- I created a new Printed Documentation Layout in the Single Source Layouts pane, and from there I was able to generate .pdf files, without encountering the Visual C++ runtime error.
- But the "Cannot find Microsoft Word installed on your system." msg still pops up when I try to generate .docx files. (When I generate .doc files, they have no content.)
Message was edited by: mizotto

First the fact that the problem is with old layouts suggest they were using an old template.
The PDF creation relies on a Word document being created in the background. The fact that you cannot generate a good doc or docx makes it odd that you get a PDF. The PDF is OK I take it?
I'm wondering if you have not applied the 901 patch and are running Word 2010 64 bit?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

RoboHelp 10: Problems generating Printed Documentation

Environment
Windows 7 Enterprise, Service Pack 1, 64-bit operating system
Office Professional Plus 2010 Versions 14.0.7106.5001 (64-bit)
RoboHelp 10: 10.0.0.287
Visual Studio 2010 Professional. I open RoboHelp from within Source Control (have been doing it for two years).
Problem
Sometime after moving to RoboHelp 10, and even after successfully generating Printed Documentation output, I encountered a major problem generating Printed Documentation from RoboHelp: “Internal error encountered. Failed to generated Printed Documentation”. The error occurred when I tried to generate Printed Doc using my default TOC, which looks something like this:
Topic A
Topic B
Book 1
Book 2
Book 3
Topic C
Topic D
Based on an old Peter Grainge reply to someone about a similar problem, I removed all but the first topic from the Chapter Layout pane and generated the Help. Everything was fine until I got to the topics after Book 3. At that point everything started to fail again. When I removed Topics C, D, etc. from the Chapter Layout pane, the output was built successfully.
I tried moving Topics C, D, etc. to the top of the Chapter Layout pane, and got the same error. I tried creating a new folder and put Topics C, D, etc. into that folder. Failure after failure.
As an experiment, I removed all the Topics C, D, etc from the Chapter Layout pane, but then added them to the Print Document Section Layout pane (not where I want them). The Printed Documentation built successfully.
During attempts to build with Topics C, D, etc. in the Chapter Layout pane, I kept getting a Word error: Word is trying to recover your information. After that there was always a failure.
Selecting PDF as the output did not work when the Topic C, D, etc. files were at the bottom of the Chapter Layout pane.
I create a new TOC and a new Printed Documentation SSL. Failed to generate.
As a matter of reference, I've been generating Printed Documentation from the same TOC for more than a year and so cannot figure out what has changed in RoboHelp or Word to cause this grief .
Has anyone experienced anything like this?
Carol

Dear Peter,
Thanks for following up. Last Friday I finished extensive testing on my own and working with RoboHelp Support. Here's what I sent to Support this morning.
If after reading this screed, you think it worthwhile for me to get a copy from Source Control for you to look at, I will do so. Thanks for offering to look at it.
Environment
Windows 7 Enterprise Service Pack 1, 8.00 GB RAM, 64-bit OS
Microsoft Office Professional Plus 2010 Version 14.0.7106.5003 64-bit--Note: We repaired my current version of Word, in case that was the problem, but did not reinstall Office--we do not think that the Word version is the problem because we generated successfully with other TOCs and when generating individual documents.
RoboHelp 10.0.1.292. Upgraded from RoboHelp 9 in May 2013. Replaced hard drive in September 2013 and reinstalled RoboHelp.
Visual Studio 2010 Professional 10.0.40219.1 SP1Rel (I open the project from Source Control and check files out to a folder on my desktop.)
Issue
Printed Documentation failed multiple times with the default Table of Contents, which contains all the topics in the project. TOC specs are as follows:
Properties: .docx, desktop location, no conditions, embedded images, “Generate a single document”, “Retain hyperlinks”.
330 files, 12 top-level books, 15 second-level books, 7 third-level books, 6 fourth-level books, and 8 fifth-level books
Results
Generation to Printed Documentation does NOT fail for other, module-specific TOCs, nor to WebHelp Pro SSLs for the same sets of topics. In addition, and perhaps more important, generation to Printed Documentation does NOT fail with “Generate Individual Documents” selected, or when there are approximately fewer than 259 files in the TOC.
Did not fail consistently based on any particular topic.
Did not fail consistently based on location of any particular topic in the TOC.
Failed when I created new TOCs based on ‘working’ TOCs. For example, copied a module-specific TOC and then added topics to it from the default (superset) TOC. I did this in case the original default TOC was corrupted.
Failed when I create a new TOC with the same folder/file structure from scratch.
Failed when I created a new TOC with a flat file structure from scratch.
Failed when I retrieved an older TOC from the last release of the product.
Failed when I created new SSLs each time. I did this in case the SSLs had got corrupted.
Failed when I did not open the project from Source Control (removed project from Source Control and worked locally).
Began to see failure when there were more than about 258-263 files in the TOC. For example, successfully generated Printed Documentation with 262 files in the TOC. Added one topic and the generation failed. Removed that topic and added several others, one at a time. Consistently failed. To test this, I created a TOC with all the files in a flat structure, generated a report for the TOC, printed it, and counted the number of files. I then began deleting files and regenerating the Printed Document to try to identify the number of files in the TOC when the generation failed. Successfully generated up to about 258 files and then it began failing. (Occasional successes at 260 and 261, but that may be because I didn’t always consistently remove the Glossary and Index from the Chapter Layout pane.)
Other Comments
(I know that we should generally post non-RH issues to other forums, but in this case I wanted to include all potentially related issues in this posting.)
The first time you generate any type of output, the “Critical error of Source Control Provider. Please restart IDE.” Message appears. This message appears behind RoboHelp. As a result, if the RoboHelp window is maximized, you think that RoboHelp is hung. Forcing a close of RoboHelp leaves the partially generated Word document in an unstable state. When you re-open RoboHelp and try to generate the output again, RoboHelp says that the output is in use. Unfortunately, there is no way to ‘free’ the Word document and you have to restart the computer. In addition, when the dialog box is hidden, even using Alt+Tab to find the dialog box is complicated because you can’t grab it and click OK until RoboHelp completes its processing. The workaround is to reduce the size of the application window so that you can see the dialog box and try to quickly grab it and click OK. That said, as soon as processing is complete you can grab the dialog box and click OK; at that point RoboHelp displays its own error message about the success or failure of the output generation. It is not clear whether the RoboHelp API or Source Control puts up this error message, but it’s definitely a problem until you happen upon the workaround.
RoboHelp does not check SSLs even when I right-click the SSL in the Single Source Layouts pane, click Check In, select the XML and SSL files, and leave “Keep checked out” deselected. The red check mark remains next to the SSL name. In addition, even when I Check In All files before closing the project, the next time I open the project RoboHelp displays a series of Check In dialog boxes requiring me to check them in again.
When RoboHelp hangs during a Printed Documentation failure and the Version Control setting is to check in all files when closing a project (which I’ve now deselected to avoid this problem), Ctrl+Alt+Del indicates that you cannot shut down the program because RoboHelp is waiting for a response. Yes, RoboHelp was waiting for me to check in some files (because of the Version Control setting), but hid the Check In Source Files dialog box behind the application. This usually left a Word document in limbo, forcing me to restart the computer.
At one point RoboHelp stopped saving changes to an SSL after I made changes and clicked Save and Generate. Each time I reopened the SSL, I had to select .docx, etc. all over again.
Carol

Integration Repository Interfaces - Documentation??

I'm looking for an on-line source for the integration respository interfaces - similar to the now deprecated Interface Repository (IFR)(http://ifr.sap.com).
In particular, I'm looking for the WSDL/XML and Java Proxy interfaces for the following BAPIs.
- BAPI_CUSTOMER_GETDETAIL or BAPI_CUSTOMER_GETDETAIL1
- BAPI_CUSTOMER_CHANGEFROMDATA
- BAPI_SALESORDER_GETSTATUS
- BAPI_SALESORDER_CHANGE
Does anybody know if those interfaces are available online anyplace?
Thanks,
Mark

Gregor,
Thanks. That is what I was looking for. Unfortunately, it seems to be password protected.
I'm trying to view the StandardSalesOrderChangeRequestResponse service here -> https://www.sdn.sap.com/irj/sdn/esapreviewsystem and when I select "Inbound Interface WSDL" or "Inbound Interface Documentation", I get hit with a logon screen.
Ny SDN username/pwd doesn't work. Is there a guest username/pwd that can be used?
-- Mark

How to generate the documentation of nested private class?

When I generate the documentation with the flag -private (the less restrictive), I get only the javadoc class block comment for the nested classes, is there any way to see the information about fields, operations, constructors, etc.
I am using jdk 1.3.1._04
Thanks in advance,
David

This might be a bug in javadoc. When using -private, all
program elements should be documented. There should be nothing
special that you need to do to document the members of nested
classes.
However, we haven't done a lot of testing with -private.
If you would please submit an example of the source code that
reproduces this error, we can take a look at it. Please follow
the bug submission procedure at:
http://java.sun.com/j2se/javadoc/faq/index.html#submitbugs
It's also possible this has been fixed in 1.4.x.
-Doug Kramer
Javadoc team

RH creates a frame around tables when generating printed documentation

Hi,
We import FrameMaker documents into RoboHelp 9 and then we generate printed documentation (Word documents).
In the generated Word documents, all tables appear in a frame or an additional table cell.
This did not happen in RH7.
In RH itself it seems OK.
Is there a hidden setting somewhere that controls this behavior?
Thanks,
Rakefet

I found out that when we import the FM document into RH, RH adds the following lines in the html file:
before the table:
<?rh-align_start align="left" ?>
after the table:
<?rh-align_end ?>
When I manually delete these lines, the tables in the generated Word files are OK.
Is there something I can do in FM or in RH so that these lines are not added?
Thanks,
Rakefet

How to generate repository documentation

Hello,
is possible to generate repository documentation? That mean, i would like to extract tables names, foreign keys, comments etc. into XLS file. Physical layer is enough for mne, thanks....

A little documented feature that became available with 10.1.3.3 is the Metadata Dictionary. Fire up your Repository in offline mode, go to Tools->Utilities->Generate Metadata Dictionary. Place the resultant set of files in $ORACLEBI_HOME/oc4j_bi/j2ee/home/applications/analytics/analytics/<RepositoryName>. You then need to modify your instanceconfig.xml file to add the <SubjectAreaMetadata> tag. You can find details in the
Oracle® Business Intelligence New Features Guide
Release 10.1.3.3
Part No. E10416-01

Generate a documentation of Custom PIP

Hi together,
we had a little integration case with for applications and about 20 AIA Componentes (ABCSs, EBSs and EBF). We use different MEPs and two EBOs. It is possible to generate a documentation based on AIA Annotionas in composite.xml? Our is there any other alternative to generate a documentation (like JavaDoc for Java)?
Bye
Marcel

I have one example at the bottom of this page.....
http://www.iwebformusicians.com/WebMusic/Navigation.html
The code from the generator is pasted into an HTML Snippet.
The menu will drop across photos and text etc.
Once you have created several of these you can line them up, side by side, across the top of your web page.
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

How to generate interface like the following?

How to generate interface like the following? It is very practical.
http://dl.getdropbox.com/u/212185/WebPics/AdobeForum_001.png
Thanks!
hanyang

Interesting. I know much of that is possible, but it'd be heavy customization work. There's no 'table' type in the ADM, nor is there anything about lists with columns.
That said, you can pretty much customize the drawing of a list entry to your heart's content so I don't see why you could do it manually. Drawing text is done by specifying boxes so it should be fairly easy to do that part.
As for making a combo box pop up when you click...that I'm far less sure about. Again, catching the click and figuring out what column it's in shouldn't be too hard, so long as you take the proper care in setting up your widget & variables. And you *might* be able to create a combo box on the fly and position it appropriately -- though without a clear z-order I can't guarantee that it wouldn't appear *behind* the list. The trouble I see is figuring out how to dismiss the combo box when finished with it. You'd have to be careful to catch a lot of events like the panel losing focus and clicks to anything else on the panel and hooking them all up to let the list know it's time to dismiss the temporary combo box.

Generating Database Documentation API?

Generating Database Documentation is a new feature in 1.5.1. It is explain here:http://www.oracle.com/technology/oramag/oracle/08-sep/o58sql.html
I was wondering if they where an API version of this so i can call this straight from the database.

Hi,
When you select "Generate DB Doc" on a connection, SQL Developer runs a number of queries that aren't compatible with Oracle 9i.
For example, "NOCYCLE" and "ALL_IND_STATISTICS" used by the following queries are compatible only starting with Oracle 10g.
SELECT B.OBJECT_ID,
b.owner,
b.object_type,
b.object_name,
b.status,
replace(b.object_type,' ','_') type_link,
b.owner sdev_link_owner,
b.object_name sdev_link_name,
b.object_type sdev_link_type
FROM sys.all_objects a,
sys.all_objects b,
(SELECT object_id, referenced_object_id
FROM public_dependency
START WITH object_id = :OBJECT_ID
CONNECT BY <strong>NOCYCLE</strong> PRIOR referenced_object_id = object_id) c
WHERE a.object_id = c.object_id
AND b.object_id = c.referenced_object_id
AND a.owner NOT IN ('SYS', 'SYSTEM')
AND b.owner NOT IN ('SYS', 'SYSTEM')
AND a.object_name 'DUAL'
AND b.object_name 'DUAL';
select * from sys.<strong>all_ind_statistics</strong> where owner = :OBJECT_OWNER and index_name = :OBJECT_NAME
Best Regards

SoftMotion 2010 - Trajectory Generator interface

Hi
I'm just upgrading from 8.6.1 to 2010 SP1, and am having some problems with the changes to the SoftMotion module.
My code that used the Trajectory Generator interface no longer works. I get an error message saying "Trajectory Generator Method: Library that defines the XNode cannot be found". A quick search of the website suggests that this may be because I've got the 'Standard' version of the module, and need the 'Premium' version to use this interface. Is that right?
My NI licenses just got upgraded automatically (under SSP) and there was no warning that existing functionality would be removed. Does that mean there's a simple way round this? It doesn't look like the standard scan mode interface will do what I need.
Thanks,
Ian

Hi Chris,
I don't think my problem is due to either of those things. I'm unable to create new VIs using the Trajectory Generator interface because those VIs don't seem to be installed.
From the readme file you linked to:
New Features
The following items are enhancements or additions to the LabVIEW NI SoftMotion Module relative to the NI SoftMotion Development Module for LabVIEW.
LabVIEW Palette Reorganization
The VIs previously on the NI SoftMotion palette are now included on the NI SoftMotion»Advanced»Trajectory palette.
But in my installation there isn't an Advanced palette under NI SoftMotion. After reading the help files, I think this may be because I have the 'Standard' version of SoftMotion, not 'Premium'. Please could you confirm whether this is the case?
I did previously have access to this functionality (when using 8.6.1), so I don't think I'd agree with the readme's description of these changes as "enhancements or additions"!
Regards,
Ian

ITunes COM Interface Documentation

hi all
I want to know ,how to add the photos to ipod in iTunes COM Interface Documentation .
please help me ,
thanks.
my email: [email protected]

I don't think the COM interface supports what you want to do. You can get the documentation here:
http://developer.apple.com/sdk/itunescomsdk.html

WIP Open Interface Documentation

Hi All,
Can anyone point me to the WIP Open Interface Documentation?
Thanks & Regards,
Arun

You can find in Metalink , Knowledge Browser : Work in Process.
In Documentation - Related Resources, you will find 'Additional WIP Documentation'.
There you will get links to the WIP Open Interface Documentation .

Generate Interface Documentation

Similar Messages

Maybe you are looking for