Generate Manufacturing Date

Which control is responsible to generate Manufacturing Date?

Hi MMV
In general order start and order finish dates are determined from your required date ( PIR ) and the GR processing time and In house prod time. (given in material master )
Production finish and production start are Lead time scheduling and this depends on the floats given in material master.
This schedulings are done through OPU5 for plan order and OPU3 for production order .
Work scheduling view is must for prodcution order generation and scheduling.
Edited by: J. Saravanan on May 23, 2008 1:51 PM

Similar Messages

Unable to generate "Export data source" for Master data infoobject

Hi Gurus,
I'm in BW 3.5
I need to generate "Export data source" for a master data info object.
I followed below steps:
I ticked the checkbox "Characterist. is export data source" in the master data Info object maintenance screen.
In the Infosource area, for the desired Infoobject --> Right click --> Generate export datasource --> a dialog box displays saying "The generation of DataSource was successful"
Problem:
Even after refreshing, etc.. I couldn't find the generated datasource 8**** for the above master data. I also tried to replicate the datasource from the myself source system, but couldn't find it even there. I don't know where the generated export data source is hiding ???
Could anyone please help ????
Thanks,
Venkat

Hi Venkat,
I guess that after creating an export datasource for infoobject this DS should appear in the RSA1-Source systems - MYSELF - datasource overview (with name starting with 8). Since it's a datamart, it should appear also as system generated infosource. And in this case you would be able to assign in URs of data target the appropriate infosource (make sure that in Infoproviders tab of RSA1 you have inserted your infoobject as a data target).
However, there are some bugs related to export data source. CHeck if you see you export data source in RSA6.
If you don't see it - consider applying OSS Note #816892 - "30BSP26: Export DS for master data is not generated".
Note #876845 - "30BSP29: InfoObject change: Export DataSource not adjusted" is also may be useful.
-Vikram

Giving Error while generating the Data mart to Infocube.

Hi Gurus,
I need to extract the APO infocube data in to the BW infocube. For that iam trying to generate the data mart to APO infocube .
So, that i can use that data mart as a data source to extract that APO Infocube data in to BW infocube.
In that process iam trying to generate the datamart for APO Infocube . But while generating it is giving errors like below:
Creation of InfoSource 8ZEXTFCST for target system BW 1.2 failed
The InfoCube cannot be used as a data mart for a BW 1.2 target system.
Failed to create InfoSource &v1& for target system BW 1.2.
PLease suggest me what to do for this Error problem.
Thanks alot in Advance.

Hi,
Point No : 1
What is Planning Area :
http://help.sap.com/saphelp_scm41/helpdata/en/70/1b7539d6d1c93be10000000a114084/content.htm
Point No : 2
Creation Steps for Planning Area :
http://www.sap-img.com/apo/creation-of-planning-area-in-apo.htm
Note : We will not create Planning Area.This will be done by APO team.
Point No 3 : Afetr opening the T-Code : /n/SAPAPO/MSDP_ADMIN in APO you will be able to see all the planning areas.
Point No 4 : Select your planning area and Goto Extras menu and Click on Generate DS
Point No 5. System automaticall generate the DS in APO (Naming Convention start with 9) and Replicate the DS in BI Map to your cube and load the data.
Regards
Ram.

BIP Trial 11.1.1..6: Error while generating XML data in Data Model

Hello,
I have created a Data Model with a single query. After saving the DM and clicking on the XML icon to generate sample data, I get the following error:
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
End tag 'span' does not match the start tag 'img'. Error processing resource 'http://localhost:7001/xmlpserver/servlet/xdo'...
*<table style='background=color: #d9e5ef; margin-top: 10px;' width='100%' cellspacing='0' cellpadding='0' border='0' summa...*
I have verified that the SQL runs without errors in SQL Developer using the same connection parameters as whats used in the DM.
There are no html tags/key-words etc being used in the sql our it's output.
Is there a a way to debug this? This is extremely frustrating. Especially since the same sql works without any issues in Oracle Reports.
Thanks,
Manish

ya i can understand we wont do the sql logic at the data model part as some time performance issue may come when comparaed to sql run in package and sql running in data model . so i have mostly done using package and i will just do select * from table in the data set of data model so i didn't face any issue's like this .
once check this tutorial may be you already
i use to create parameters like this i didn't face any issue
SELECT * from TEST where ID=:p_id
http://st-curriculum.oracle.com/obe/fmw/bi/bip/bip11g/gettingstarted/gettingstarted.htm

How to find out the "manufacture date"?

Hello!
Can you tell me how to find out the manufacture date of my Satellite A110-334 with the serial "SY6224123K"?
I need this information for my insurance!
I found only this link for HDD`s: http://www.storage.toshiba.eu/index_manual.php?pid=220&sid=536&la=en
But there is no "S" on the first digit!??
So it is maybe "Y6" which can be November 2006! Is this right?
Thank you!
===========
This is the information on the link above:
How to encode a Toshiba Hard Disk Drive Serial Number?
The Toshiba serial number (S/N) includes details of the date of manufacture. The first digit of the serial number indicates the Month of manufacture and the 2nd digit indicates the Year.
Example:
M Y x x x x x x x
M = Month
Y = Year
The month digit goes from 1, for January, through to 9, for September, and then X, Y and Z, for October, November and December.
Examples:
2 8 1 7 0 0 0 1 A
2 = February
8 = 1998
3 0 5 4 4 3 0 6 T
3 = March
0 = 2000
X 9 D 7 8 3 3 1 T
X = October
9 = 1999
The remaining digits contain information about factory and production line, and some digits are reserved for a continuously running serial number.

Hello
Try with http://gedb.toshiba.com/
Let me know if you find info you need.

Inbound Delivery (DESADV): How to transmit SLED/BBD and Manufacture Date?

Hello
We have another challenging task to solve. Here is the scenario (SAP Release ERP 6.0):
One Lindt company (supplier) sends an outbound DESADV IDoc to another Lindt company (Purchaser). Here the inbound DESADV should create an inbound delivery. Finally, the inbound delivery is replicated to the external WHS partner who does the Goods Receipt against this inbound delivery.
The outbound DESADV contains all logistical data including SSCC. In particular, the batches have a manufacture date (LIPS-HSDAT) and a SLED/BBD (LIPS-VFDAT).
SLED = Shelf Life Expiration Date
BBD = Best-Before Date
In the outbound DESADV the SLED/BBD is mapped by default into segment E1EDL24/VFDAT. For the manufacture date we implemented an user-exit.
How does the inbound delivery look like? The batch number appears as "Vendor batch". The SLED/BBD does NOT show up even though the inbound DESADV contains the date in E1EDL24/VFDAT. This inbound DESADV did NOT contain any controlling segment E1EDL19. Adding this segment (QUALF = 'VDT' = Shelf Life Expiration or Best-Before Date) had no effect.
Here is my assumption why the SLED/BBD does not show up in the inbound delivery created by the inbound DESADV:
Because we do not yet have the "real" batch (just the "Vendor batch") the system ignores any SLED/BBD. As soon as the external WHS partner sends the GoodsReceipt message (as inbound WHSCON ) the inbound delivery is updated with the "real" batch as well as the SLED/BBD.
QUESTIONS:
(1) Why does the SLED/BBD not show up in the inbound delivery created by an inbound DESADV?
(2) Do we need another user-exit to map the manufacture date into the inbound delivery?
Once again thank you for sharing your time and expertise with us.
Regards
   Uwe

Apply SAP Note
Note 1576788 - Transfer of exp. date
(IDOC_INPUT_DESADV1) to inb. delivery
Here are the correction instructions for your reference:
=========================================
FORM DESADV_IDOC_PARSE
Delta001Context Block
        IF NOT t_dlgn-vbelv IS INITIAL.
          t_dlgn-posnv = s_dl24-posex.
        ENDIF.
Delete Block
        mv s_dl24-brgew t_dlgn-brgew.
Insert Block
        mv s_dl24-vfdat t_dlgn-vfdat.                         "n_1576788
        mv s_dl24-brgew t_dlgn-brgew.
Have fun!
- Joemil

Outbound Delivery without Manufacturing date

Hi Guys,
I have activated SLED in Article master.(We are using SAP IS Retail, ECC 6.00)
At the time of GRN, users have entered manufacturing date to check
remaining shelf life for an article.
I have made following customization (using transaction code OMJE)
(a) 3 No Check at Goods Issue for movement type 601,602, 647 and 648
In spite of above IMG settings (No Check at at Goods Issue), system
shows an error message that, Enter the date of production (Message No.
12018) in transaction code VL02N.
Pls note that, we don't want system to check SLED at the time of PGI.
Any feedback....most welcome.
Regards,
Muralidhara

Hi MURALIDHARA,
Please Check your incompletness procedure.
I guess u r sending the goods to the store. During stock transfer movement type 641, 603 are used. You will also have to set this indicator.
Let me know if u r still stuck. I have the solution as i have already configured this process.
Regards
Tapan

How to get the manufacturing date of iphone 5s?

how to get the manufacturing date of iphone 5s?
thanks

Enter your serial number here:
www.appleserialnumberinfo.com/Desktop/index.php
To find your serial number:
Settings > General > About > Serial Number

Need urgent help to generate SPL Data Sources for Line Items

Hi All,
I am trying to extract the Special Purpose Ledger Data from R/3 into BW. To do this, I am following the steps to generate the Data Sources for Totals table and Lien Items Table.
Using Transaction BW01 and BW03 on the R/3 side, I am able to generate the Totals Record-DataSource successfully.
But I am not able to generate the Line Items-DataSource. I am using the same procedure.
Can someone please help me or point me in the right direction. Are there any other settings I need to make to generate the Line Items-DataSource. Interestingly, I am able to generate the Line Items-DataSource for some other old ledgers in the System like ZZ and ZX. But I need the Line Items-DataSource from a ledger called ZP for which I am having trouble.
I would greatly appreciate if someone can get back to me ASAP.

During BW01, The Generate extract structure is fine for both Total and Line Item Table.The issue is when we run tcode bw03 where you assign the datasource to a ledger.
Here, I can assign only for the Total Records data source and NOT for the Line Items-DataSource.
I hope I could explain the issue. Looking forward for some advice.

Issues while generating Schema DAT files

We are facing two type of issues when generating Schema ".dat" files from Informix Database on Solaris OS using the
"IDS9_DSML_SCRIPT.sh " file.
We are executing the command on SOLARIS pormpt as follows..
"IDS9_DSML_SCRIPT.sh <DBName> <DB Server Name> ".
The first issue is ,after the command is excuted ,while generating the ".dat" files the following error is occuring .This error is occuring for many tables
19834: Error in unload due to invalid data : row number 1.
Error in line 1
Near character position 54
Database closed.
This happens randomly for some schemas .So we again shift the script to a different folder in Unix and execute it.
Can we get the solution for avoiding this error.
2. The second issue is as follows..
When the ".dat" files are generated without any errors using the script ,these .dat files are provided to the OMWB tool to load the Source Model.
The issue here is sometimes OMWB is not able to complete the process of creating the Source Model from the .dat files and gets stuck.
Sometimes the tables are loaded ,but with wrong names.
For example the Dat files is having the table name as s/ysmenus for the sysmenus table name.
and when loaded to oracle the table is created with the name s_ysmenus.
Based on the analysis and understanding this error is occuring due to the "Delimiter".
For example this is the snippet from a .dat file generated from the IDS9_DSML_SCRIPT.sh script.The table name sysprocauthy is generated as s\ysprocauthy.
In Oracle this table is created with the name s_ysprocauthy.
s\ysprocauthyâyinformixyây4194387yây19yây69yây4yây2yây0yây2005-03-31yây65537yâyT
yâyRyâyyây16yây16yây0yâyyâyyâyâ¤y
Thanks & Regards
Ramanathan KrishnaMurthy

Hello Rajesh,
Thanks for your prompt reply. Please find my findings below:
*) Have there been any changes in the extractor logic causing it to fail before the write out to file, since the last time you executed it successfully? - I am executing only the standard extractors out of the extractor kit so assumbly this shouldnt be a issue.
*) Can this be an issue with changed authorizations? - I will check this today, bt again this does not seem to be possible as the same object for a different test project i created executed fine and a file was created.
*) Has the export folder been locked or write protected at the OS level? Have the network settings (if its a virtual directory) changed? - Does not seem so because of the above reason.
I will do some analysis today and revert back for your help.
Regards
Gundeep

How can I generate a data merge that includes a barcode from excel spreadsheet to InDesign?

Can you please advise if the following process is possible within InDesign CS 5.5? (Mac OS 10.8.2).
We need to create a data merge that includes a barcode. The data merge is for several thousand records.
We have a customer-supplied Excel spreadsheet that contains seven fields, one of which is a number that ultimately needs to print as a barcode when we make the data merge in InDesign.
As you would expect, the conventional six fields data merge perfectly - but we can't find a way to make the barcode print correctly within the data merge.
We have investigated several possible solutions without success.
Some solutions suggest a plug-in for Excel to convert the number into a barcode whilst still in the spreadsheet - but this doesn't come across correctly when we import the CSV file into the InDesign data merge.
We have investigated certain third party software applications but none provide the full solution we require. Some, for example, appear to create the barcode within the Excel spreadsheet but don't produce the barcode correctly when we data merge in InDesign; and some will allow us to create a one-off barcode within InDesign but have no automated way of retrieving the thousands of Excel numbers and turning them into barcodes.
We have also come across possible 'font' solutions but have had no success with these either.
For a previous job we needed to produce we outsourced to a specialist mailing company, who assured us they produced the whole job (very quickly) within InDesign. They, understandably, won't tell us how they did it. But, given the speed with which they produced the job for us, we imagine - with the correct software - the whole process is easy to do.
Can you please advise?

See second posting atHow do I generate a data merge in InDesign from an excel spreadsheet which includes a barcode

How to Generate the Dates of Billing Plan Contract

Dear experts,
Need your advice on this.
I have a requirement to create a program to update the Billing Plan of contract. It will run in background and update the end date (billing plan), then generate the dates ( Settlement Date for Deadline, Billing date for billing index and printout, etc ..).
I have managed to change to end date using 'BILLING_SCHEDULE_READ' and 'BILLING_SCHEDULE_SAVE', but I couldn't generate the dates. I've searched sdn and still, no luck. I've tried 'SD_SALES_BILLINGPLAN_CHANGE' with no result. I've also found 'RV_SALES_DOCUMENT_UPDATE', but I dunno how to fill-in all the parameters.
Please help .. I have run out of ideas ...
Thx..
TRI

Found the answer .. using BDC :).
Thx for attention ..
TRI..

Manufacturing date entry control in MIGO for process order GR

hi
when i make process order GRN output entry ,i enter the manufacturing date for the batch.But it is now allowing me to enter,future date as well as any past date even before the RM issue date.please let me know wheter any control can be given so that while enterin manufacturing date , system should not allow a dae earlier than , RMissue date or Operation start date and any date future than the material recipt GR date for the output.The best practice is the manufacturing date is the date on which the first operation of the batch starts.
unnikrishnan

please write the user exit for the same

Process order release date as batch manufacturing date

Hi All,
We have automatic batch creation during the release of the process order. Now the requirement is that proess order release date should be updated as Batch manufacturing date in the corresponding Batch data (MSC3N). How this can be done.
Regards
Vinamrath

Hi Vinamrath,
Hope your proess order release date and the batch creation date are same.
In such case go to txn CT04 (create Characteristic) and create a Characteristic say "Batch manufacturing date". Then in the tab Addnl data maintain the table name as "MCH1 or MCHA" and Field name as "ERSDA" (created on-this is the batch creation date).
In case your proess order release date and the batch creation date are not same, then there is a field called " HSDAT" -date of manufacture.you can maintain this field name in addnl data.
Maintain this Characteristic in classification (CL02)
Then this will get updated in the batch and same can be viewed in MSC3N
Regards
Hari
Edited by: Harikris_83 on Sep 29, 2011 3:05 PM

HT3939 i want to know the manufacture date of serial c39hgm9udtd2

I want to know the Manufacture date of C39HGM9UDTD2
if possible how to check the history of the phone like year of production, month of production, Model colour, Billed Date, Etc.

https://selfsolve.apple.com/agreementWarrantyDynamic.do

Generate Manufacturing Date

Similar Messages

Maybe you are looking for