Generate Messages in AOL
I want to load messages from one environment to an other environment.
Does an utility exists to load messages automatically without retyping all of them in the new environment? I found something in Generate message treatement (parameter DB_TO_SCRIPT) but it seems to be not supported by Oracle (message that I had in log file) Thanks.
We are having the same dilemma going from 11.5.->11.5.8, though we have it down to about 30-40 hours (still unacceptable.)
yehuda.friedman
Similar Messages
-
this is an apple generated message. simple!
what does it mean? so far no one at apple has a clue.
how do i fix it? nothing even begins to address this issue so far. generalities about system setup show a lack of respect for customers. yes my system is plugged in and i have reset and rebooted and rechecked everything. i need help because this a real problem that needs a real solution, not more platitudes.
help please, not more wasting of my time. i have spent an entire afternoon on this already.this is exactly the kind of response i expected, almost begged support to please not do this to me and yet there it is another meaningless, non helpful, standard template response to restart my apple tv.
this does NOT work which is why i am contacting you. i have tried all suggestions about unplugging and restarting and nothing works.
i live in an apartment and logon to the provided wifi wireless. so i do not have access to a router. however, management says they have talked with their provider and have been assured that the required ports are available.
remember all the jokes about how bad windows was because the solution was always to re boot. funny huh? how is apple any different.
i have been to the local apple care store and they are clueless, too.
should we just end it here and you admit that i will not be getting any support from apple on this one? i got the ipad because my kids were such big fans. it is difficult for me to share their enthusiasm.
at this point i am just curious about how you say you cannot support your own product so i can complete my file on this contact.
thanks...sorry it was you who got this problem.. -
BDoc Generated Message Structure
Hi All,
When I am creating a custom BDoc( Messaging), the message structure which system has generated do not have the namespace.
For example I am creating a messaging BDoc ZCOUNTR_MSG and assigning it to package ZCMG.
In the 'BDoc overview tab' under general data, I am entering Related Data Type as ZCRM_COUNTRY_EXT.
After saving, the system has generated a message structure with name ZCOUNTR_MSG000.
The following i have read in the documentation used to create the above example.
Note that a structure for the mBDoc will be generated. The name is built from customer namespace /CRMGEC/ plus short name of the BDoc. In our example the structure has the name /CRMGEC/ZCOUNTR_MESG.
Question:
Can some one please let me know, what should I do in order to happen the system generated message structure should prefix with name space /CRMGEC/
Or
Please let me know is there any impact if the system generated message structure do not have namespace /CRMGEC/
If some one can send me the exact procedure to create a custom messaging BDoc with example, that would help me a lot.
Maximum points will be rewarded if any kind of help/suggestion.
Thanks a lot in Advance.
Nadh R.Hi Nadh,
Call up Transaction SE16.
Enter table name SMOG_MAPSG and choose 'Table contents (F7)'.
Enter 'Z*' as a selection criterion for TR_SEGDD. Choose 'Execute'.
To select all entries, choose menu option 'Edit -> Select -> Select All F9'. To delete all entries selected, choose menu option 'Table Entry -> Delete'.
Execute the action again in which the error occured. If you have source code that refers to the generated structures, change it to the new names (starting with /CRMGEC/).
For more information please refer SAP Note : 388756
Regards,
Johnny. -
Generating message id by myself
Hello,
I've one question about generating Message IDs. I know that Message ID is generated automatically by Oracle. My question is, whether is it possible to generate this ID by myself, i.e. from my application that works with AQ. Have you got any experience in this area?
Thanks,
Zdenek.You may be able to pull the data from the chatsync folder amongst the garbage. You can try to open up the dat files and use a text/ASCII editor to view the contents. If you know what you deleted then search for some of the key words or phrases. If it's present there, then you may be able to retrieve it. That's the probably the only location you might find it in since I'm not aware of it being available elsewhere. http://community.skype.com/t5/Windows-desktop-client/Recovering-removed-chat-messages/m-p/1029262/highlight/true#M76754
-
How to automatically generate messages
hello.
as part of the ongoing development of my video library system (done using Java, Swing + JDBC) - i must be able to generate an Overdue Reminder message and a Fine message in the form of JOptionPane messages. in order to do this i must be able read the loan information from my video library database so that i can generate such messages. i have pseudocode already made out for this.
IF ReturnDate is greater than 7th day
Display OverdueReminder
IF Product is not returned after OverdueReminder is issued
Display Fine
IF Fine is not paid
Display AccountDisabledNotice
how can i turn this pseudocode into code?yes. what i have to do now is learn how to generate messages.
thanks for the reply. -
When logged in multiple times, I get annoying messages from AOL System Msg
I am using iChat from home and work. In my iChat settings, I have "Allow multiple logins for this account" set.
If I log in from work (and am still logged in from home, or vice versa), I get a message from "AOL System Msg" telling me that I am now logged in from two locations, and that I can reply with '1' to log off the other location. These messages are somewhat annoying, as "AOL System Msg" apparently cannot be blocked. Is there a way to avoid these and still being logged in from multiple locations?Is one version iChat 2.x ?
If so then the answer is No.
If both are iChat 3 try changing the setting when the other computer is Off. This maybe difficult but maybe the weekend would be the time to log out of the Work one first and then on Monday turn the Home one Off.
9:10 PM Friday; August 24, 2007 -
I have updated iOS 6 in my iPhone 4S and it went perfectly fine. Just after that when I opened the message app I found that the sms body of system generated messages was not visible after tapping on them.
The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck. -
Rule-generated messages on GWIA - Allow replies
Last year on Friday before the week of July 4, we had a user create a vacation rule and she checked "Reply to External Users." She had listed her work email at her apartment complex. Right after she left work that day, her apartment complex emailed her saying the office would be closed for the week of the 4th. Her rule replied that she was on vacation, the apartment complex replied the office would be closed... and you get the picture. When she got back, she had received 80,000 emails and had sent 80,000 emails. We turned off "Allow replies" on Rule-generate message but now some would like it turned back on. Is there a way to prevent a loop such as this? If so - how? Thanks! Susan
* susan1525,
not really. If you allow replies to the internet and a user creates a silly rule including "subject contains *", this may happen again. If the rule doesn't contain that statement, the reply rule should fire only once per sender until disabled and enabled again.
I allow rule generated messages to the internet to very few users for that reason.
Uwe
Novell Knowledge Partner (NKP)
Please don't send me support related e-mail unless I ask you to do so. -
Prevent rule-generated messages to certain host
Hi,
maybe someone has an good idea for our challenge.
We want to suppress the rule-generated messages from GroupWise but not depending on who sends it, but on who receives it.
Why?
Because we are on the way to enable Vibe Email reception but we don't want the vacation messages to be sent to Vibe (different internal domain, so the mails will pass GWIA and there be routed via route.cfg to the vibe server).
All thought / ideas are appreciated.
Thanks
MathiasHi Mathias,
Gosh - using Class of Service never even occurred to me! Pity that it's not flexible enough for your needs
Indeed, enhancement request time: http://www.novell.com/rms
Cheers, -
PUMP process is Running. Not generating message in report.No replication
Hi,
I am using GoldenGate 11g with Oracle database 11g on IBM AIX server at source and Linux at destination.
I have created the extract process and the pump process but the pump process is not responding.
The report of my PUMP process is as below. I can't see any run time messages getting generated in it. Even the replication is not happening.
Please suggest how to search for the issue here and get the replication working.
GGSCI (FIFLX595) 85> view report IUT01dp
Oracle GoldenGate Capture for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
AIX 5L, ppc, 64bit (optimized), Oracle 11g on Apr 22 2011 03:25:30
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2012-02-01 15:30:08
Operating System Version:
AIX
Version 5, Release 3
Node: FIFLX595
Machine: 00C576D24C00
soft limit hard limit
Address Space Size : unlimited unlimited
Heap Size : unlimited unlimited
File Size : unlimited unlimited
CPU Time : unlimited unlimited
Process id: 16019716
Description:
** Running with the following parameters **
EXTRACT IUT01DP
SETENV (ORACLE_SID = "NGPIUT")
Set environment variable (ORACLE_SID=NGPIUT)
uSERID ggs_owner, PASSWORD *********
RMTHOST OFSMUG-VM-87.i-flex.com, MGRPORT 7809
RMTTRAIL /oracle/GoldenGate/Setup/ggs/dirdat/IUT01/rt
PASSTHRU
TABLE IUT01.*;
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 8G
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 16G
CACHESIZEMAX (strict force to disk): 13.99G
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for IBM/AIX RISC System/6000: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
Database Language and Character Set:
NLS_LANG environment variable specified has invalid format, default value will be used.
NLS_LANG environment variable not set, using default value AMERICAN_AMERICA.US7ASCII.
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "AL32UTF8"
Warning: your NLS_LANG setting does not match database server language setting.
Please refer to user manual for more information.
2012-02-01 15:30:13 INFO OGG-01226 Socket buffer size set to 27985 (flush size 27985).
2012-02-01 15:30:13 INFO OGG-01052 No recovery is required for target file /oracle/GoldenGate/Setup/ggs/dirdat/IUT01/rt000000, at RBA 0 (file not opene
d).
2012-02-01 15:30:13 INFO OGG-01478 Output file /oracle/GoldenGate/Setup/ggs/dirdat/IUT01/rt is using format RELEASE 10.4/11.1.
** Run Time Messages **
***********************************************************************Thanks !!!Thanks for your reply.
The GoldenGate log is as follows :- ( the last few lines )
2012-02-01 16:15:05 INFO OGG-00991 Oracle GoldenGate Capture for Oracle, iut01dp.prm: EXTRACT IUT01DP stopped normally.
2012-02-01 16:15:08 INFO OGG-00987 Oracle GoldenGate Command Interpreter for Oracle: GGSCI command (oracle): start iut01dp.
2012-02-01 16:15:08 INFO OGG-00963 Oracle GoldenGate Manager for Oracle, mgr.prm: Command received from GGSCI on host 10.180.22.245 (START EXTRACT IUT01DP ).
2012-02-01 16:15:08 INFO OGG-00975 Oracle GoldenGate Manager for Oracle, mgr.prm: EXTRACT IUT01DP starting.
2012-02-01 16:15:08 INFO OGG-00992 Oracle GoldenGate Capture for Oracle, iut01dp.prm: EXTRACT IUT01DP starting.
2012-02-01 16:15:09 INFO OGG-00993 Oracle GoldenGate Capture for Oracle, iut01dp.prm: EXTRACT IUT01DP started.
2012-02-01 16:15:14 INFO OGG-01226 Oracle GoldenGate Capture for Oracle, iut01dp.prm: Socket buffer size set to 27985 (flush size 27985).
2012-02-01 16:15:14 INFO OGG-01052 Oracle GoldenGate Capture for Oracle, iut01dp.prm: No recovery is required for target file /oracle/GoldenGate/Setup/ggs/dirdat/IUT01/rt000000, at RBA 0 (file not opened).
2012-02-01 16:15:14 INFO OGG-01478 Oracle GoldenGate Capture for Oracle, iut01dp.prm: Output file /oracle/GoldenGate/Setup/ggs/dirdat/IUT01/rt is using format RELEASE 10.4/11.1.I am not sure how to check "extract read the changed data and store in to trail files? and the same check pump process read the trail files or not? "
I can see the lt file "lt000003" getting updated regularly. which is the local trail file for extract process. The path of this file is :-
/data01/oradata/GoldenGate/dirdat/IUT01
The RMTTRAIL path for PUMP process is : -
/oracle/GoldenGate/Setup/ggs/dirdat/IUT01/rt ( this path is present on the remote machine ) . This file is not getting updated regularly.
The detail report file for iut01dp is as follows :-
GGSCI (FIFLX595) 119> info iut01dp, detail
EXTRACT IUT01DP Last Started 2012-02-01 16:15 Status RUNNING
Checkpoint Lag 00:00:00 (updated 00:00:00 ago)
Log Read Checkpoint File /data01/oradata/GoldenGate/dirdat/dpump/IUT01/lt000000
2012-02-01 15:35:31.000000 RBA 0
Target Extract Trails:
Remote Trail Name Seqno RBA Max MB
/oracle/GoldenGate/Setup/ggs/dirdat/IUT01/rt 0 0 10
Extract Source Begin End
/data01/oradata/GoldenGate/dirdat/dpump/IUT01/lt000000 2012-02-01 15:35 2012-02-01 15:35
/data01/oradata/GoldenGate/dirdat/dpump/IUT01/lt000000 2012-02-01 15:35 2012-02-01 15:35
/data01/oradata/GoldenGate/dirdat/dpump/IUT01/lt000000 * Initialized * 2012-02-01 15:35
/data01/oradata/GoldenGate/dirdat/dpump/IUT01/lt000000 2012-02-01 14:31 2012-02-01 14:31
/data01/oradata/GoldenGate/dirdat/dpump/IUT01/lt000000 2012-02-01 14:31 2012-02-01 14:31
/data01/oradata/GoldenGate/dirdat/dpump/IUT01/lt000000 2012-02-01 14:31 2012-02-01 14:31
/data01/oradata/GoldenGate/dirdat/dpump/IUT01/lt000000 * Initialized * 2012-02-01 14:31
/data01/oradata/GoldenGate/dirdat/dpump/IUT01/lt000000 2012-02-01 12:14 2012-02-01 12:14
/data01/oradata/GoldenGate/dirdat/dpump/IUT01/lt000000 2012-02-01 12:14 2012-02-01 12:14
/data01/oradata/GoldenGate/dirdat/dpump/IUT01/lt000000 2012-02-01 12:14 2012-02-01 12:14
/data01/oradata/GoldenGate/dirdat/dpump/IUT01/lt000000 2012-02-01 12:14 2012-02-01 12:14
/data01/oradata/GoldenGate/dirdat/dpump/IUT01/lt000000 2012-02-01 12:14 2012-02-01 12:14
/data01/oradata/GoldenGate/dirdat/dpump/IUT01/lt000000 2012-02-01 12:14 2012-02-01 12:14
/data01/oradata/GoldenGate/dirdat/dpump/IUT01/lt000000 * Initialized * 2012-02-01 12:14
/data01/oradata/GoldenGate/dirdat/dpump/IUT01/lt000000 * Initialized * First Record
/data01/oradata/GoldenGate/dirdat/dpump/IUT01/lt000000 * Initialized * First Record
/data01/oradata/GoldenGate/dirdat/dpump/IUT01/lt000000 * Initialized * First Record
Current directory /data01/oradata/GoldenGate
Report file /data01/oradata/GoldenGate/dirrpt/IUT01DP.rpt
Parameter file /data01/oradata/GoldenGate/dirprm/iut01dp.prm
Checkpoint file /data01/oradata/GoldenGate/dirchk/IUT01DP.cpe
Process file /data01/oradata/GoldenGate/dirpcs/IUT01DP.pce
Stdout file /data01/oradata/GoldenGate/dirout/IUT01DP.out
Error log /data01/oradata/GoldenGate/ggserr.logP.S. :- I am very new to GoldenGate, please also let me know how can i find out the answers for your queries. I hope the data provided above is sufficient for your queries , if you need anything more let me know.
Suggest some idea to start the replication.
Thanks. -
In ME22N change when I click on Print button system should generated messag
Hi Gurus,
Once I take the PO print next time when I go to ME22N when I click on print button system should generate the message with out clicking the repeat output.
next time when I want take the print with out clicking the repeat output in ME22N when I click on print button system automatically generate the output message.
For that what are the settings need to be setup.
Thanks in advance
sapmmHi ,
If you dont want message to be generated during PO change.Change the following setting.
For eg. u have message type ZNEU.
SPRO-MM-Purchasing-Mesages-Output control-message type -click Define Message Types for Purchase Order
click on :Fine-Tuned Control: Purchase Order
Delete the entry for operation 2 , for ZNEU.
Thank you.
Regards
Amar -
Generate Message Interface for SOAP Adapter
Hi All,
I want to implement a scenario like this:
ABAP System -> RFC Adapter -> XI -> SOAP Adapter -> Web Service
Currently the WSDL of the web service is known. It is http://www.abysal.com/soap/AbysalEmail.wsdl
How can I generate the inbound message interface in XI according to the WSDL?
Thanks
Jerome
Message was edited by: Jerome Zhao
Message was edited by: Jerome ZhaoHi Jerome,
Import the WSDL as an external definition and then you can create a inbound Message interface based on that external definition.
Regards,
Sridhar -
BPM - Unable to generate message from BPM in PI
Hello Experts,
I am using a test scenario using BPM which has only two steps Receive and Send step. The scenario flow looks like File-> BPM-> ECC. File posted from the external file system is picked up by PI processed successfully and sent to teh Integartion Process.
However the later part i.e BPM is supposed to receive this processed message (MATMAS) and send it to ECC. There is no PI message generated for BPM -> ECC part.
I have ticked the Start Process flag in Receive step. Am i missing something else?
Kindly advice.
Thanks and Regards,
Elizabeth.Hello All,
On testing teh configuartion in ID my scenario works fine and all steps are tested successfully, wheras when i try manually triggering the message from RWB, message fails in Pi with the following error:
<!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>BPMTriggerAcknowledgement</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Unable to convert the sender service BPMTriggerAcknowledgement to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have already tried following this thread IDOC_ADAPTER - ATTRIBUTE_INV_SND_SERV
Is there anything else to be taken care of?
~Elizabeth. -
Firefox deletes my AOL Mail messages without allowing me to read them, giving me a search box instead of the message. I have to access this mail through IE, but IE crashes frequently.
You may be missing a font, or your font cache may have been corrupted. Re-boot in Safe Mode
<http://support.apple.com/kb/HT1455>
then boot again normally. (This should clear your font caches.) -
OMB Plus : how to get all the generated messages into a text file ?
Hello,
I wrote an OMB TCL script and I would like to know how to get all the messages generated during the exécution into a text file.
I tried this, but it works only for a puts command :
set DesProjet ACT_1
set filename [ open "c:\\temp\\INFDE_010_IMPORT_REPOSITORY_$DesProjet.log" w]
puts "test"
Thank you for your helpHello Alain, you should try the OMBLOG variable. If you set it inside OMBPlus:
set OMBLOG c:/temp/mylog.txtthen all the OWB specific commands are logged with their output. By OWB specific I mean all those that start with OMB.
This is more than what you see in the interface, because:
- messages inside procedures are logged; you wouldn't see them on std.output when you call a proc
- variables are resolved, so if you issue the command
set my_var VERY_IMPORTANT_TABLE
OMBDROP TABLE '$v_myvar'the log will show:
OMBDROP TABLE 'VERY_IMPORTANT_TABLE'
Table dropped
and you know something is wrong... so OMBLOG is very useful to intercept all manipulations on you repository.
If what you want instead is a dump of the screen output when you execute a script, I suggest you redirect standard output from the operating system command line. Unfortunately OMBPlus doesn't support all advanced redirection and tracing features of the TCL language.
Hope this helps, Antonio
Maybe you are looking for
-
Can't get purchased apps back on iPhone or in iTunes
I recently lost a hard drive and with it my iTunes installation. So I set up iTunes on a new machine to sync my iPhone 3G. I set the iPhone applications tab in iTunes to sync all applications. When I pressed sync on iTunes, it erased half of the inst
-
Download ALV output to excel with formatting
Hi All, i want to download ALV output to excel sheet and the uneditable fields in ALV oputput should be locked (uneditable) in excel also. Can you please tell me approach to achieve this functionality? Thanks in advance.
-
Generate dynamic content in tld ???
Hi, Can we generate the tag lib names on the fly (or more generaly everything in the tag) ? ie instead of directly write <mytaglib:foo name="xxx" .../>, is it possible to do something like that : <% String tldName = "mytaglib"; %>and then call <<%=tl
-
Hi: I am writing a PCI driver in Solaris10. There are many new DDI/DKI interfaces for interrupt handler, such as ddi_intr_add_handler in document. But I can not find them in my system. My OS is Solaris10. Where are the interfaces for interrupt handle
-
WebLogic Server v5.1 Vs. v6.1
I am working on a project currently that is looking at using either WebLogic server 5.1 or 6.1. We have experience using 5.1, but I have always gone with the premise that it is generally advantagous to use a newer version of software. With this in mi