Generate Quota for New Hire and existing employee

Hi Guru
I need your help/suggestion in the enclosed issue.
The scenrio is that an emaployee (exisiting) is entitled for all the absence quota at the beginning of a year(i,e, on a calendar year).I am using TM04
However,the employees who join in the mid of the year should get absence quota on a pro-rated basis.
For example: If an employee(exisiting) is entitled for 12 days of Annual Leave in a calendar year.
If a new employee joins the company in the month of Feb.He/she should get on a pro-rated basis i.e. he/she is eligible for 11 days of Annual Leave in all.
I tried few changes in t559l table and set the base entitlement to accural period,in selection rule the accural period is Daily,in accural entitlement it is checked on pro-rated basis,but this doesn't help.
If you have a PCR/schema for this please share.
Please suggest.
With Regards,
Shivani Singh

In table T559L;Accrual period Tab, select relevant to Date type "hiring date"( from IT 0041)
Hope this helps.

Similar Messages

  • Can we create a fillable W4 form for new hires and sign it electronically

    Can we create a fillable w4 form for new hires.  can the new hire sign electronically and what is the cost for having electronic signatures?

    We don't support electronic signatures. You should check out our sister service Adobe Echosign - www.echosign.com

  • Error in generating quota for unpaid leaves

    hello gurus,
    I have 3 Absence Quotas - (1) Annual Leave    (2) Long Service Leave     (3) Sick Leave
    I have attached the same reduction rule for all 3 abs quotas
    I generated Leave without pay for a day in the month of May 2011.
    When generating quotas for May 2011 for Annual & Sick Leave its generating for 30 days but for Long Service Leave its generating for 31 days
    Any idea how the quota generation goes wrong only for Long Service Leave ??
    pls help!!
    rgds,

    0Requid :187.98
    what was this request ID...
    go to RSRQ and give the request ID and execute...it gives the load monitor...
    chk the load to which it belongs to either master or transaction...
    if it belongs to master...then try to find the object to which it was loaded...and schedule the change run for the same object....
    rgds,

  • Imovie keeps getting hung up generating thumbnails for new events.  How do I fix this?

    I imported several movies from my miniDV camera without issue.  Yesterday I tried to import another movie, only about 30 minutes long to a new event, and the "generating thumbnails for new event" has taken 12 hours and is still not complete.  I tried to force quit and reopen the program it just starts the process again upon opening.  I went online and downloaded and installed the imovie updates.... still no luck. I can't even use imovie now because when I open it it just goes back to generating thumbnails.  Any thoughts?  Im new to the Mac, and I just bought this computer 3 days ago and want to love it, but this is frustrating.

    What version of iMovie 2011.  Make sure you have installed all updates.  There has been several updates addressing stability issues.  If you have a newer system there were compatibility issues.  Hopefully this will fix your issues.  I have a new 2012 MBP 13 and works fine.  It did lockup (pinwheel) 2x and has been fine.
    After the updates running Disk Utility and repair permissions as well.  Make sure things are correctly referenced.
    Good luck
    Brian

  • I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

    I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

    Click here for options.
    (58961)

  • How do I turn on my wireless keyboard and make it 'discoverable'?  I got a message that the batteries were low, so I changed them for new ones and now the keyboard doesn't work.

    I got a message saying that the batteries were low, so changed them for new ones and now the keyboard cannot be 'found'. There seems to be no way to turn it on and make it 'discoverable' to the system.  At the moment I'm typing this on a spare keyboard plugged into the  back of my mac via a USB.  Please help!

    Have you checked to make sure the batteries are inserted the correct way? Have you tried to turn it on by pushing the right upper (round) edge of the keyboard - if you do that, do you see a tiny little green light? Since you have a wired keyboard, can you get to the Bluetooth setup/preference pane so you can manually try to sync the keyboard?
    PS - posting duplicate posts is not helpful - it makes things too confusing, so I've asked the hosts to remove your other (identical) post.

  • Since updating to Mavericks, Mail doesn't work properly.  It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again.  Any suggestions?

    Since updating to Mavericks, Mail doesn't work properly.  It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again.  Any suggestions?

    Try to force quit the mail app
    Double tap the home button. When you see the app previews on the screen scroll sideways if needed to get the preview in question on the screen. Flick that preview up and off the screen to close the app. Single tap the home button or home screen preview to exit the mode.
    Failing that, go into the settings, mail, contacts and calendars and remove your account info then put it back in and see if that works

  • System generated value for a field and incrementing (using module pool pro)

    Hi,
    I'm getting system generated value for a field and incrementing (i.e done by coding) when i'm saving the screen or transaction (which is created using module pool programming) while modifying, saving its working fine, but when i'm going out of the screen or exit n again i start the screen (with some ztransco) the value for the field again starting from 0 so i want to start from the same value for a field where we exit or got out from the screen n incremented respectively while saving the screen,
    Thanks & Regards,
    MS
    Edited by: Rob Burbank on May 4, 2010 10:40 AM

    Search the forum for number range objects.
    Rob

  • Create Separate Views for New,Edit and Display forms in Infopath

    Hi,
    I need to create a separate views for New, Edit and Display forms in infopath.
    For ex : I need a Submit Button on Display form and not in New/Edit forms.
    I tried, but i amnot able to get the changes.
    Regards, Shreyas R S

    I just validated my approach in a 2013 farm, this is precisely how it's done!
    Step 1) List > Display Form
    Step 2) Change the View within the Web Part Properties. In your screenshot it looks like you simply went to View Item on the single item, which is not the direction I gave =P.
    **Assuming you've already created the multiple views within InfoPath, this allows you to set them up as distinct defaults for New, Edit and Display, let's make that clear. If you are not even to the point of having separate views, that is just in InfoPath,
    Page Design tab, far left, New View button

  • HR Report for finding details for the new hires and leavers

    Dear All,
    I am very new to SAP HR ABAP.
    Need Help
    I have to create a report which fetches all the details <Details are mentioned below>
    for all the
    1)     New hires
    2)     Leavers
    in between a time range.
    <Details to be fetched :~ 
    Title
    Fax
    Mobile
    Nationality
    Domicile
    Religion
    Passport
    Place of issue
    Issue date
    Valid till
    Date of Hire
    Action Reason
    Reporting to
    Date of exit interview
    Leave Date
    Leaving Reason
    Street
    Address Line2
    City
    District
    Region
    Country
    Postal Code
    Communication Number
    Personal ID
    Date Of Last Hire
    Location
    Job
    Payroll area
    OrgLvl1
    OrgLvl2
    OrgLvl3
    OrgLvl4
    Personnel Number
    Date of seniority
    EEBankName
    Bank account no
    Bank account type
    PERID
    Thanks a lot !!!
    Joy
    Edited by: joydip majumder on Jul 11, 2008 10:46 AM

    Hi  joy ,
    you can create ur own z-report for this requirement  , for this u have to  read the  employee data with in the date rage for   infotype 0 (Action) for hiring and leaving dates. Other related infomation  u can fetch from the related infotypes tables like PA0001 etc using simple select queries.All required fields can be dispalyed in the  ALV output.
    Regards
    Lakhan
    Edited by: lakhan on Jul 11, 2008 2:35 PM

  • 11.1.2 - Workforce and CAPEX issue - Add New Hires and Add New Asset Rules

    Hi All,
    We are working on Oracle Fusion 11.1.2 and are using the out of box functionality for Workforce and CAPEX.
    We are facing a weird issue in case of the above Modules when we try to Add a new Hire or a new Asset in the respective modules using the Add TBH Hourly , Add TBH Salary and Add Asset rules.
    The Issue is sometimes the correct number of New Hires or Assets is added as specified in the prompt. For instance, if specify Number of New Hires as 5, then 5 rows of TBH are added on the web form dynamically with other employee properties populated on the form as mentioned in the prompt. However, at times this does not happen, so if I specify 5, 4 rows are added, if I specify 15, 7 rows are added and so on.
    The out of box rule looks okay, we are not sure why this should happen?
    Has anyone of you faced a similar issue, It would be really helpful if you can share your thoughts.
    Thanks a ton in advance.
    Madhavi

    Have you try to check the related Business Rule? In older version Add TBH menu related to a Business Rule. Never configure this module on 11.1.2 but maybe the add tbh menu related to a Business Rule or Script on Calculation Manger

  • 401k enrollment issue for New Hires

    Our 401k savings plan does not appear in the enrollment screen (HRBEN0001) once an adjustment reason of "New Hire" is entered.  All of our health plans and insurance plans appear, but not the 401k savings plan.  Please advise if there is a way to get savings plans to appear.  New employees are not eligible until 6 months out, however I think we should be able to get the record created and save with a future date.  Otherwise, our workaround is to enter it directly via IT0169.  Thanks for your help!

    Have you defined the 401k benefits in the benefits program(flex admin)? Also , check the standard selections and assign under automatic or default plans.....

  • New MBP and existing network

    Hello All,
    I've just migrated from a G4 PB 1.5 to a new MBP and, while I can log into the existing WiFi, I can't see any of the other nodes on the network. I have my wife's MP Black and a Mini acting as a HTPC/Server. I just migrated through using the assistant and didn't change any of the settings yet.
    The Mini is sitting headless downstairs so I used to log in remotely using Chicken of the Sea VNC. Now it no longer is visible, nor do the computers show up via network.
    It's been a while since I set this network up and I know that 10.4.8 has altered some of the security. What do I need to tweak??
    Cheers,
    JC

    A router separates two LAN networks and creates two broadcast domains. The standard Microsoft workgroup browsing will only list what is inside your LAN and never something outside or across a router.
    If you want to access what is on the other side you must manually enter the share with its IP address. If the computer you want to access has IP address 192.168.100.12 then you enter \\192.168.100.10\share.
    But as you want to be able to share freely inside your LAN anyway, I would suggest you set up the WRT as wireless simple access point. That way, you only have a single LAN and a single broadcast domain and thus you can find all other computers if you check for other workgroup computers. Instructions how to set it up as access point are here.

  • Trying to add itunes account for new phone, sharing existing music folder

    My wife's phone is already linked to the admin user account on my imac.
    I have created another account to use for linking my own iphone 4 to.
    I have tried the directions I have found so far for making the folder of our current music available to the new account: I moved the itunes media folder to the public folder, and went to the advanced setting in itunes in both the original account and in the new account, and pointed itunes to the newly located folder - music only shows in the original account.  Going to itunes with the new account doesn't let me see any of our existing music.
    I have not yet added my iphone to the new account.  Will doing so help itunes set itself up?

    You can have more than one account authorised on the same iTunes on your computer, but having/using just the one account us usually the best approach.
    If you created a new iTunes account then you can log out of it on the iPad by tapping on it in Settings > Store and then log in with the old account. If you bought / downloaded any content with that new account then that content will be tied to that account and it can't be copied or transferred to a different one - so if you want to keep that content you will need to remember the account name and password in order to download any app updates to its purchases and in case you ever need to re-authorise the account again.
    As long as you old iTunes account is authorised on the computer's iTunes (Store > Authorise This Computer) that you connect the iPad to (and your content is on your computer), you should be able to sync content from that account to the iPad.

  • I want the cursor to be in the address bar when creating a new window; it works for new tabs and in a new private window, but not in safe mode.

    I have tried following the advice offered in the few different threads I have found on this but nothing fixes it. I want the cursor to be in the address bar when I open a new window and/or when firefox opens without restoring a previous session. I fixed the issue for new tabs via about:config but this doesn't work for new windows. I tried safe mode and the problem persists. In new private windows the cursor is in the address bar.

    The search box in about:home steals the cursor. Changing your home page to something else will cause the cursor to start in the address bar for new windows.

Maybe you are looking for