Generate Remote Connection for our Solution Manager 7.1

Hi,
In order to complete installation of SAP Solution Manager 7.1, we need to send a message to SAP Support through SOLMAN but we still don't have a RFC connected to the SAP backbone.
Anyone get a process easy-to-understand and to set up, we're in France and it's very urgent.
Currently we've set up correctly installation of back-end and front-end, we can logon to solution manager and it's all.
If you have ever done an installation of Solution Manager with Remote Connection, please join me.
Best regards,
William

Hello,
Did you download and follow the Installation Guide?
http://solman_srv:8000
Is NOT a Fully Qualified Domain Name (FDQN)
A Fully qualified name would have the format
Host.Company.Domain
i.e. http://service.sap.com is fully qualified, while http://service is not.
This is the first problem you are having, but I suspect you have more, as at this point in the installation SAP* should already been disabled and your Admin user accounts setup. This would have been durng the post installation steps, which are performed prior to Solman_setup.
Yes, you need to defined parameter icm/host_name_full to equate with the FQDN of solman-srv.
Second thing is that client 000 and client 001 are reference clients provided by SAP. You don't want to be changing these clients. You want to be copying these reference clients to your clients and then configuring those clients, not your reference clients, as this will cause a problem when you need to create new clients.
Did you follow the installation guide carefully? I would recommend you review, because it covers off these things, so you shouldn't be running into these errors at this point in the configuration phase, if you followed the Installation guide (especially the POST Installation steps)
Regards,
Paul

Similar Messages

Maximum concurrent call connections for our Call Manager v7.15

Hi everyone,
Hope you can help! I was just asked one question I should have known how to answer...
We are using CM 7.15. Have 1 publisher and 1 subscriber. We have 2 pri T1 (24 slots). One connects to 1 2821 Voice gateway and another one is connection to another 2821 voice gateway in another location. I do not think we use SIP trunk...but I am not sure if we are using mpcp or H323.... so how do I check which protocol I use?
The most important question is... I would like to ask how I can find out what the maximum concurrent sessions of the call connections are? How do I find it out?
Please help...thank you very much for your help.
Takumi

Hi Bobson Lam,
in CUCM Administration > Device > Gateway, you have a list of configured Gateways ... in this list there is a column called 'Device Type', this column shows the 'H.323 Gateway' or the Gateway Model (for ex.: 2821) if it's MGCP.
For Maximum Concurrent Sessions ... have you try RTMT (CUCM Administration > Administrations > Plugin > RTMT for Windows)? There are some System - Performance, that shows, for example, Call Active for H.323.
Hope this helps.

RFC at customer for EWA into our Solution Manager

Hi,
I have created a BACK RFC in a customer system to get EarlyWatch reports sent into our Solution Manager.There is no direct connection between the 2 systems, so I'm connecting via their SAPRouter and our SAPRouter.
In the customer system in SM59 I've set up :-
RFC SM_<SID>CLNT100_BACK where <SID> is our SolMan
Routestring i.e. Target Host.- /H/<customer_internal_SAPRouter_IP/S/sapdp99/H/VAR_external_SAPRouter_IP/S/sapdp99/H/VAR_internal_Solman_IP/S/sapgw00
Gateway Host - VAR_internal_Solman_IP
Gateway service - sapgw00
Question 1 - Does RFC and routestring look correct?
I've also modifed saprouttab on the customer side with the entry :-
P ... VAR_external_SAPRouter_IP 3299
And on our side with the entry :-
P * * 3300
Question 2 - Do both saprouttab entries look correct?
I've also asked for our external firewall to allow traffic from the customer IP to get to our SAPRouter server.
Also for the customer firewall to allow traffic to our external SAPRouter IP
Question 3 - Have I missed anything on these 2 firewalls?
Question 4 - After the traffic reaches our SAPRouter server, are any changes to our internal firewall required for it to get to our Solution Manager system?
Any help is much appreciated - at the moment when we test the RFC on the customer system we can see traffic from the customer reaching our SAPRouter server, but then get an error in dev_rfc0 :-
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2803
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=223
CPIC program connection ended (read error)
dev_rd shows :-
ERROR => NiBufIProcMsg: hdl 52 received rc=-93 (NIEROUT_INTERN) from peer [nibuf.cpp 2125]
Thanks,
Richard Shaw

Hi Anil,
Thanks a lot.
SAP provides the EWA report for all its clients production system without a Solution Manager system & not provide the sam for non productive system. That means to say that for quality & developement system SAP does not provide a EWA report without a SOLMAn. For this system you must required SOLMAN to generate the report.
Kind Regards,
Jitu

Urgently required Good Installation Document for SAP Solution Manager 4.0

Hello Experts,
Iam implementing /installing SAP Solution Manager 4.0 in our scenario in a day/two. My query is tat do we need to install it APAP + JAVA based only or can we install it ABAP based only?
Secondly i needed good self prepared document for SAP Solution Manager 4.0 installation which gives me step wise step procedure in detail.Plz dont give service marketplace link as i hv already seen and checked installion guide over it ,act. i wanted self prepared doc which is of more use. The useful answers shall be surely awarded points. Requested to revert at earliest as i need this guide in a day itself.
My Email Id is [email protected] .
Regards,
Saumya

Hey Somya,
Can u plz send me the configuration guide of change request management that Rakesh had sent to you..
My Email-id is [email protected]
Plz its urgent, let me know if u want me to open a new thread so that i can reward you with points..
Tnx in advance.

SAP EHP 1 for SAP Solution Manager 7.0 configuration check

Hi All,
I have configured my SAP EHP 1 for SAP Solution Manager 7.0 according to the guide. Now i would like to test my configuration. Please provide me with a check list and test scenarios.

SOLMAN_SETUP will guide you to setup SOLMAN, after you setup you gotta make sure that everything is green or resolve the errors.
SMSY---> Ssystem Check RFC Connections,check the SLDCHECK.
Refer to OPERATIONS GUIDE under INSTGUIDES, which is very detailed.
Thanks
SM

Question for installing Solution Manager & ECC 5.0

Any idea for installing Solution Manager 3.2 on Windows server 2003 with Oracle9i problem when install Database Instance. Installation failed when the intallation progress went to Oracle Post-Load Action.
The message from startsap log file is
"running C:\usr\sap\T01\SYS\exe\run/sapstart.exe name=T01 nr=03 SAPDIAHOST=saptest02 -Wait
start service SAP01_03 on machine
saptest02
OpenService of SAPT01_03 failed. Error#: 1060
CreateNamedPipe for
saptest02\pipe\SAP01_03 Failed, Extended Error #2
start service SAP01_03 on machine
saptest02
OpenService of SAPT01_03 failed. Error#: 1060
C:\usr\sap\T01\SYS\exe\run/sapstart.exe=>sapparam(1c): No Profile Used."
Another question is about installing the Oracle database software: should we choose Create Databse or not when install Oracle Server Software only?
Is my installation process as following correct?
->SELECT A PRODUCT TO INSTALL:
Oracle9i Database 9.2.0.1.0
->WHAT TPYE OF INSTALLATION DO YOU WANT:
Enterprise Edition
->SELECT A DATABASE SUITED TO YOUR NEEDS:
Software only
After end of installation
install Oracle9i Client 9.2.0.1.0->Administrator
Thanks a lot

Hi Shusen, I´m trying to do the same think (Install ECC IDES with Oracle 9i in one computer for educational propose), can you help me with this:
1.I made the same Oracle install process because when I tried with sapserver.cmd nothing happened, for that reason i made:
SELECT A PRODUCT TO INSTALL:
Oracle9i Database 9.2.0.1.0
->WHAT TPYE OF INSTALLATION DO YOU WANT:
Enterprise Edition
->SELECT A DATABASE SUITED TO YOUR NEEDS:
Software only
After end of installation
I did not install client, is this correct?
2.After install this, I run the sapins.exe but show me this error: INSTALL FIRST SAP J2EE ENGINE, I download the JAVA SDK from JAVA page (java_ee_sdk-5-windows) but did not fix the problem: Do you know what file is this? Or, where is it in the DVD installation?
Thanks in advance if you or somebody can help me and excuse me if the answers are obviously, but I´m not a system engineer I´m only try to install IDES for learn SAP WM.
Thanks.

EWA: error message in CRM check for SAP Solution Manager system

Hello!
In EWA report for SAP Solution Manager system I have seen error message: Many CSA* inbound queues in error status were detected in your system. As a result of this BDocs have not been delivered. And then table
Queue Name                                Status     Date of first entry             Entries
CSABUPA0000000070           READY     03.12.2007                          45
CSABUPA0000000934           READY     07.05.2008                          45
CSAIBASE0000000000           READY     23.11.2007                          36
CSA_ORDER_8000000000      READY     22.11.2007     5
CSA_ORDER_8000000001      READY     22.11.2007     3
and others.
I looked transaction smq2. There are 11300 queues in it. Is it actual error or it is a normal situation? And that must I do, to remove an error?
Edited by: Mariya Kurbatova on Jul 2, 2009 6:27 AM

Hi,
Usually problems with hanaging CSA* queues are caused because too many
indiviaual queues are created for the qRFC resources to handle. You can
limit the number of queues as described in note 763680.
Note 763680 would be useful if all of your qRFC resourcesa are in use
when you have a great number of queues. With a large number of dialog
WPs on the system it would probably make sense to reduce the amount
as described in the note.
the casue when you have this problem would be to check SMQR -> GOTO ->
qRFC resources. You can also see if most of your dailog WPs are in use
in SM50.
Also refer to note 758677.
Please schedule report RSQIWKEX (Inbound) to run as described in the
note.
And since your title has mentioned that the EWA is on your CRM satellite system; this maybe a further good reference too
When you replicate lots of data from CRM to R/3, there could be a qRFC
resource problem. In this case, the numebr of queues created can be
reduced by implementing the attached note 356228, particularly solution
2.
For CSA* queues is slightly different from the one decribed in note;
this is because the CSA queues exchange data within the CRM system.
The steps described should be followed, except that table SMOFQFIND
must be used instead of CRMQNAMES. In this table, fields TR_SNAEMS and
SEGM_FLD are equivalent to the CRMQNAMES fieds BAPISTRUCT and BAPIFLD
respectively. It should be possible to follow the solution 2 in the
note as long as you use SMOFQFIND instead of CRMQNAMES.
Hope this helps
Cheers,
SH

Client setting option for Productive solution manager

Dear all expert,
I've set in transaction code SCC4 (client setting) for my productive solution manager:
1. "No changes allowed" for changes & transport for client-specific object
2. "No Changes to repository and cross-client customizing objs" for cross-client object changes
However with above setting, when execute Tcode SOLAR01 & edit the structure/document, I am not allowed to save it, getting the error "Changes to Repository or cross-client Customizing are not permitted".
could anyone please advise what is the correct setting for the solution manager?
please help
thank you

Hi Pradeep,
User just need to edit/upload new documentation to the project SOLAR01, and this is not allowed because of the system setting
By the way, do you know any method that I can restrict user to edit the 'Structure' tab, but only allow them to upload & edit the documentation under 'project document' tab?
the recommendad way will be we always setup the project & complete in development system & then finally transport to productive solution manager without any further changes anymore?
please advise.
thank you

Ticket SAP Solution Manager 7.0 to SAP EHP 1 for SAP Solution Manager 7.0

Hi,
I want to migrate all tickets from SAP Solution Manager 7.0 to SAP EHP 1 for SAP Solution Manager 7.0 , please let me know the procedure how to migrate it.
DB Detail
SAP Solution Manager 7.0 - MSSQL( 9.00.4035)
SAP EHP 1 for SAP Solution Manager 7.0 - MSSQL(10.00.2531)
Thanks,
Kaleel

Dear Mohamed,
I was reading the post and the replies and while I think your question has been answered, I just want to make sure what you are trying to achieve. Is it a migration, where you have one Solution Manager system on SAP Solution Manager 7.0 and another
SAP Solution Manager EHP1 system and you were looking to migrate the Service Desk messages?
If you are "Upgrading" one system from Solution Manager 7.0 to EHP1 then all the messages are preserved.
If you are "Migrating" to a physically different system, then transfer of Service Desk Messages is not supported.
Please see the document [SAP Solution Manger- Conent Transfer|https://websmp204.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000608232009E]
Also Service Desk is a completely independent CRM Service, so the messages could always be archived, as has been suggested.
No depending on your scenario, is the EHP1 system brand new or is it already productive? If it was brand new, you might be able to do a homogenous system copy, and then upgrade the new system to EHP1. But if it is already productive, this would not be an option.
Hope this helps to clarify.
Regards,
Paul

Connection Establishment between Solution Manager and BW

Hi,
Could you pl let me know the steps to follow for establishing the connection between Solution Manager and BI 7 system?
Thanks & Regards,
Vijaya

Thanks!

Reporting for CHARM Solution Manager 4.0

I would like to create some reports on the tickets and documents created for in change management. (CHARM) module of Solution Manager using the BI functionality, are there any datasourse available or do we have to build our own?
Does any one have pointers to descriptive information about the datasourses for CHARM or the Performance monitoring solution.
Thanks
Ken

Hi Experts,
Many ppl must hv downloaded CDs frm this path.............................but no one is helping......................
When i follow the path:
1. Go to http://service.sap.com/swdc
2. Select Downloads--> Installations and Upgrades --> Entry by application Group -
3. Then Click SAP Technology Components --> SAP Solution Manager --> Solution Manager 4.0
No path / link for downloading CDs appear there ,and no content /download tab is there even though iam using administrative S User Id to see it, plz revert,iam struggling..............why is it so happening .......................................Revert at earliest ,this is very urgrnt .................i want to download CDs at earliest......................
Points guaranteed.
Regards,
Somya

Setup and Configuration for a Solution Manager instance

I am setting up a Solution Manager instance for a client in Australia.
Currently there is no reference client that I am aware of in Australia for Solution Manager. So this is extremely important to get it right. Also I am an independent contractor, so I am unable to call on any in-house experts from a consulting firm for help.
So I am looking for answers from some experts who have done this before.
Had some training on Solution Manager back in 2002.
Our client wants to setup the solution manager instance to monitor 9 SAP instances
- 3 R/3, DEV, Q/A, PROD
- 3 BI, DEV, Q/A, PROD
- 3 Enterprise Portal, DEV, Q/A, PROD
Solution Manager is running in a separate instance for all those listed above.
In addition to the above the client would also like to user the service desk function of Solution Manager for in-house support of SAP, and push to service desk request onto their support partner and/or SAP directly.
Question:
1) Is it better to use the Solution Manager client 001 or create a separate client for the customer?
2) How would you as the expert configure the service desk component to push service desk requests to the support partner (a 3rd party Service Desk Tool or another Solution Manager instance), and allow the customer to choose to send the request direct to SAP?
3) The client would also like to use the Solution Manager Instance as the CUA environment, is this advisable?
Kind Regards
David Cooper

Hello David,
Please find th answers below:
1. You should use a separate client for solution manager rather than using a standard one
2. You should configure your solution manager as the service desk for all type of support requests.Solution manager can send your requests to SAP and vice-vera.Why do you a third part tool and waste money of the client.Solution manager can do all for you very effectively
3.sure you should configure solution manager as CUA environment,there are no issues with that
Let me know of any questions
Rohit

Where can i find the configuration guide for a solution manager beginner

dear all:
as the title,expect your reply.
thanks!

Hi Zuiyong,
the configuration guide of SAP Solution Manager contains only same general information like strategy, required SPs in sat. systems, authorization and notes.
The 'REAL' configuration guide can will find in the system in the transaction SPRO->Referenz.IMG ->Solution Manager->Solution Manager-> Basic Settings. These settings you have to make to use standard SAP Solution Manager. In the are enhanced settings you can find additional settings for additional features.
Regards,
Udo Lang

Competitors for SAP Solution Manager within central system monitoring

Hello!
We currently use SAP Solution Manager (CCMS monitors from RZ20) for the central system monitoring for several SAP systems.
Are there some other tools/competitors that can also serve as central platform for system monitoring of several SAP systems?
(e.g. HP OpenView).
Many thanks!

Hello,
You may want to take a look into the EarlyWatch Alert report.
It's a weekly report that gives information about many different areas of your systems and helps you to maintain them. It helps to detect problems before they occur by analysing trends on your systems and alerting about it. It definitely may work taking a look into it: service.sap.com/ewa.
It does not have an additional cost, all you need is a solution manager.
Regards,
Daniel.
Edited by: Daniel Nicol on Apr 11, 2011 8:04 PM

STEPS FOR THE SOLUTION MANAGER INSTALLATION

Dear All,
Pls let me know what r the steps and procedure fir the installation of Solman.
Pls tell which is the latest version of sol man is available in the market.
Thanks and Regards
Amit Saini

Hi ,
check
https://websmp103.sap-ag.de/solutionmanager
For all necessary information and roadmaps
Last release is 7.0
Fo installation guide go to
http://service.sap.com/instguides
Installation & Upgrade Guides
Industry Solutions
SAP Business Suite Applications
SAP NetWeaver
SAP Solution Extensions
SAP Components
Adaptive Computing Controller
RWD
SAP Bank Analyzer
SAP Basis
SAP Billing Consolidation
SAP BW
SAP Content Server
SAP CRM Server
SAP Enterprise Portal
SAP Exchange Infrastructure
SAP Frontend Components (ITS / GUI)
SAP Global Trade Services
SAP Knowledge Warehouse
SAP MDM
SAP Mobile Applications
SAP Mobile Infrastructure
SAP R/3
SAP R/3 Enterprise
SAP SCM Server
SAP Solution Manager
Release 7.0
Release 3.2
Release 3.1
SAP Solution Manager 4.0 becomes SAP Solution Manager 7.0
SAP Solution Manager 4.0 is officially renamed to SAP Solution Manager 7.0 as of May 1st, 2008.
The new name SAP Solution Manager 7.0 brings with it the advantage of both SAP Solution Manager and SAP NetWeaver having the same release number, and is aligned with SAP's decision to streamline its product offerings. This decision also highlights the close alignment and joint go-to-market strategy of these two products.
The renaming of SAP Solution Manager 4.0 to SAP Solution Manager 7.0 is a name change only, therefore the SAP Solution Manager functionality, release schedule, installations, or other technical aspects of SAP Solution Manager will not be affected.
For further information regarding the renaming of SAP Solution Manager, please see the FAQ list. Furthermore, SAP will provide you with additional details explaining the renaming during SAPPHIRE 2008 Orlando (May 4th u2013 7th) and SAPPHIRE 2008 Berlin (May 19th u2013 21st).
Your SAP Solution Manager Product Management Team
Reward points if it help you .
antonio.

Generate Remote Connection for our Solution Manager 7.1

Similar Messages

Maybe you are looking for