Generate Sales Orders in mass based on Marketing Campaign (CRM 6.0)

Hi Support,
I want to generate sales orders in mass through marketing campaign
I have done the following customizing :
- create a new transaction type used for the Template : sales order template ZSOT and assign to it template type "D"
- assign item categories to this new transaction type ZSOT
- enter as communication medium for the channel : the sales order ZSOM that I want to be created in mass (based on the Template)
- copy control between the 2 transactions : ZSOT and ZSOM
- copy control between the item categories
- Then I create in the Web Client UI, a sales order template ZSOT with material and quantity
- Then I create a marketing campaign and choose as communication medium the sales order and assign the sales order template ZSOT previously created
- I assign a Target Group to the Campaign
- I release the campaign
- I start it to execute it
=> I obtain the message : "To generate sales orders products and quantities have to be assigned."
However the Sales Order Template contains a product and a product quantity
Any idea how to solve the issue ? Is there any step missing on my customizing
Thanks for your help !

Dear Thomas,
I have the same problem which you have explained in your thread and i have done the same settings that are mentioned by you.
Even i have tried all the possibilities to get rid of this error but i am unable to resolve this problem.
As per your inputs i have inputted the product in a Campaign but there is no option for entering quantity.
The error i am repeatedly getting is "*To generate sales orders products and quantities have to be assigned* upon executing the campaign.
I appreciate your earliest reply.
Many many thanks in advance.
Rajendra

Similar Messages

Sales-order-related mass production

Dear all:
Our client has the following bussiness scenarios in PP: sales-order-related mass production .
So in costing configuration , I use the valuated sales order stock, and not let the sales order item carry the revenue and cost .
So I I haven't actived the "sales order" in okkp, and also make the filed "consumptiong posting filed "in account assignment category "blank", and in the "valuation filed" in "requirment class " I maintained "M", and I want to use the sales order item cost estimate value as the standard price , but when in testing , after run MRP and convert the planned order into the production order, the error occurs " You cannot make an assignment to make-to-
stock.", so my question is that, in sales-order-related mass production, can we following in the such process:
1 create sales order
2 run mrp and generate the planned order
3 convert planned order to production order ?
by the way:
The material 's material type is "KMAT", and strategy group is "25", and requirment class is "46"
and I use the "valuated sales stock".
Thanks a lot.

Dear,
Have you refered OSS Note 723180?
The MRP generates planned orders to meet the requirements.The KZBWS is copied from the requirement to the planned order which should meet the requirements.During the subsequent conversion planned order -> Production order, the 'Goods receipt, non-valuated' flag is set unrequiredly.If you created an MRP run manually and if the account assignment was carried out to the project, the KZBWS would be set as account valuation filedin "requirment class " if I maintained "M".
You should set Customizing in such a way that both the requirements class of the sales order and the used material same valuation indicator. For the sales order, it is field V_T459K-KZBWS. During the creation of production order it is found that the account assignment on the sales order . Afterwards the order can be saved and a goods receipt can be posted to the sales order stock.
Or other way is Configurable materials that are also made-to-stock must have a configuration valuation in the material master record - therefore they must be maintained as a variant (storage type). In this the material itself can be referenced as a 'configurable material' (variants and 'configurable materials' with BOMs are then one and the same material).
Regards,
R.Brahmankar

Sale Order close - Mass

Hi! All
     Can anybody say me how to close the sale order in mass.
   I have some 1000 of sale order how to close the sale order in mass.
   if the deliveries relating to the sale order has been closed shall we close the sale order directly. if so how to do it.
Thanks and Regards,
Kv

Hi KV,
Close the sales order by using MASS transaction. select the object type: BUS2032(sales orders) and execute. In the tables tab select the sales order header data and in the fields tab select Rejection reason and execute. In the next screen give your sales order( first save in all the orders in an excel file and upload) and execute. select sales order item data and put your order rejection reason and click on " carry on mass change" icon. The data will be changed and if there are any errors they will be reflected in the error log.
regards
prasad

How to generate sales order in SAP using XI

Hi,
I have been assigned to generate sales order in SAP..data comming from legacy in XML file format. with the data received in XI. I need to generate sales order in SAP system,
can any body help me wat will be the step by step solution of that.
I am totally blank in ABAP. I dont know any thing in ABAP.
Thanks sree manju.

Hi Sree,
As per your requirement, you can use a file adapter to read XML files and the pass the data to XI and from XI to R/3, you have 3 ways to create sales order in SAP:
1. Idoc Adapter: Use a standard idoc to create sales order in SAP.
2 RFC Adapter.
3. Server Proxies: The transaction code for sales order creation is VA01. You will recieve the data in your server proxy method (EXECUTE_ASYNCHRONOUS) and then write a BDC code to upload this data into VA01 transaction.
Knowing that you do not have experience in ABAP coding, I would suggest you to go for Idoc adapter or RFC adapter (if standard BAPI is available).
Otherwise, for using server proxies, the help of an experienced abaper is indeed required.

How to Generate sales orders with custom Fields using BAPI_BUSPROCESSND_CREATEMULTI

Hi,
I need to generate sales orders with custom fields on table CRMD_ORDERADM_H using BAPI_BUSPROCESSND_CREATEMULTI, after changing the structure BAPI_TE_CRMD_ORDERADM_H, and feed the EXTENSIONIN table of the BAPI with data, the order is created, but any value on custom fields.
After debuging, I saw that the BAPI search for structure conversion in table CRMC_OBJECTS_GEN, but we haven't entry with BAPI_TE_CRMD_ORDERADM_H in this table. is that the problem ?, Is there any way to fix it?
Best Regards,
Salah.

That depends on where do you have the customer fields, check the table CRMD_CUSTOMER_H, if your custom fields are there, you need to use the changing parameter CUSTOMER_HEAD, I guess your already checked that one, right? but there's no custom fields, well...AET/EEWB doesn't enhance the strcuture of the BAPI, so you should do it manually, check the note following note for further details.
988410 - FAQ: User-defined fields in the BAPI
If you don't have access to the SAP Marketplace, in resume you should create an append on the structure BAPIBUS20001_CUSTOMER_H and include the following strcutrue CI_EEW_CUSTOMER_H
Cheers!
Luis

Deleting Open sales order - in mass

When i checked VA05 , I found many open sales order over a period of time.I want to know whether any method is there to select some sales orders from that list and delete them in mass ie at one stretch.

Hello,
Please use the search option at SDN forum and do not post the repeated question !! Please refer the following link for detail information !!
[DELETING OPEN SALES ORDER|Re: Mass sales order reject/delete]
[LINK|http://sap.ittoolbox.com/groups/technical-functional/sap-log-sd/mass-deletion-of-sales-order-1201141]
Regards,
Sarthak

Generating sales order for semifinished product

Hello every one. I am finding difficulty in creating a particular planning scenario. I require to sell a semi finished material which is assigned to a finished material. Finished product strategy is 50. Semi finished has strategy group with main strategy 70 and another strategy 50. While running mrp for finished material everything is running perfectly. But if i generate sales order for semi finished it is generating without errors, but requirements are not generated for the semi finished in MD04. Please provide solution.

Hi Sayak,
MRP can not generate sales order. It is an element which is being created manually after the customer is giving us PO. Against a sales order planned/production/Purchase order can be created.MRP will create production/procurement element. Not the sales order.
If you want to create sales order for semi material, create it manually(Or create CIR). The availability check should be 2 for the semi. Then it should appear in MD04 screen after putting the semi material in input screen.
Your concept is the semi should be consumed for finished product as well can be sold also.
In that case you have to create sales order separately. If some requirement is generated (PIR etc) internally, then MRP can take care of those requirement. But not the sales order.
If you are talking with sales BOM, that is a different concept.
Hope I made it clear.
Regards,
Krishnendu.

Generate Sales Order with JKSDORDER01 very long time

Hi All
When I generated sales order with Tcode JKSORDER01 very long time.
Any body can give me solution ?
Regard's
Rudy

This transaction is not a part of standard SD - most likely it's specific to some industry solution or an international add-on.
Post in another forum, search for OSS notes and send a message to SAP, since it's not a Y/Z transaction.

Sales order item report based on results analysis key and status

Hi,
I am trying to find a a report to generate list of sales order items with following selection
        -invoicing status -invoiced/not invoices (other status)
        -result analysis key assigned to this item (VBAP-ABGRS)
        -system status /released/teco
Basically i am CO consultant and not so familiar with the SD statuses. I tried VA05 and V.26 but all required selections are not available in these reports.
If no standard report is available in ERP, i would like to have it in BI. Can some help me with table fields for statuses.
Thanks in advance.
Regards
Raghu

Hi Raghu
Go to SE16 and give VBUK table and execute it there you can select the following feilds and then check wheather they are meeting your requirements or not.If they are meeting your requirements then create a new Z report by copying standard VA05 key feilds. and include the other feilds which you need.So you take your ABAP team help
Billing status     FKSTK
Posting Status BUCHK
Overall status GBSTK
Document category VBTYP
Regards
Srinath

Function Module to retrieve ALL Sales Orders in SAP based from a UserStatus

Can someone know a function module to give me a set of Sales Documents
of a specifc type and a specific System Status.
For example:
CALL FUNCTION '?????'
    EXPORTING
        txt04    =    'INAC'    "specfic status text not the 'E0001' JEST-STAT value.
        inact    =    ' '           "for ACTIVE statuses only.
        auart    =    'ZMAG'   "specifc document type
    TABLES
        t_vbeln    = i_vbeln   "result is a list of sales orders based from criteria above
I am thinking it is not as simple as the above. But 2 - 3 FMs will do.
Note: I am not given a choice to SELECT from DB tables VBAK and JEST. They want pure FM calls only. Please reply ASAP.

Hi,
i dont think there is any FM as such ..
but in VA05,,, u will get the all the information
reward points if it is useful...
thanks,
Manjunath MS

How to generate sales order number

Hai friends,
In sales order creation, I want to generate a sales order number (i.e., 1 for the first sales order, 2 for the second and so on). This number should be generated successively in background. How it can be done..?

Hello,
Yes, I'm struggling to understand what you're after too. You could create a z table to keep track of the number if it's bespoke. Otherwise try these tables: FBN1, NRIV (intervals), T161 (po) TNRO (linked to NRIV).
Good luck!
Ash Thomas
http://www.ashthomas.com
Sap Abap Developer & Sap Abap Programmer

Mass upation of Sales Orders Tcode : MASS

Thru tcode MASS I want to change the tax classification field (vbap u2013 taxm1). I am allowed to change in for Standard Orders (OR) but the system does not allow me to invoke any changes for Returns (ZRNS in our case) .
I am selecting Object type BUS2032. Is it the correct Object type or has some other Object type got to be configured for Return Orders. Or do I have to make some changes in config for the Order type (ZRNS for Returns). Please help. I have to change the tax classification of many orders.

Hello,
BUS2032 is the correct Business Object type for Sales Order. Not sure why you are unable to process the MASS T-Code for return order. May be you have some authorization issues. Check with your respective basis team.
Regards,
Venkata Phani Prasad K

Able to generate sales order whith out stock in SLoc

Hi Gurus
In the plant AB58 and storage location A001 ,only we have stock in status blocked, because they are products with short date
if we sell these product to a broker the system has to check the blocked status. we are able to generate a order and a delivery although we donu2019t have stock.
please help with is issue.
thanks in advance

It isn't an unusual thing if someone creates a SO w/o stock.
For instance, if you produce the goods to the order...
I suggest you should examine SAP's ATP functionality. Using this the proper date can be determined on sales order and it may help to prevent the creation of delivery if there's no sufficient stock.
Please check the SAP online help about availability check and revise your settings under:
SPRO > Sales and Distribution > Basic Functions > Availability Check and Transfer of Requirements > Availability Check > Availability Check with ATP Logic or Against Planning > ...

Want to change output type for 10000 sales orders through MASS

Hi Friends,
I would like to change the Output type in the sales order for 10000 sales orders.
Can I do with MASS transaction. If so, Plz let me know how ?
Is there any other process to change the output type for 10000 sales orders, as its difficult to manually in each and every sales order.
Its very urgent issue, Plz let me know at the earliest.
Thanks & Regards,
Praveen Kumar. A

This may be little tough for 10000 sales orders.
1. You have to remove the output record for the irrelevant output record using tcode VV12 for the relevant document type. So now for the document type, the old output wont be triggered.
2. Now, create output records for hte correct output type in VV11 tcode(for the output type BA03) for the document type. Now this output will be triggered for all the document types you are creating from now onwards.
3. To trigger the output type BA03, in all the old orders, you just have to open these sales orders in change mode (VA02), and just save it. When u open it the output type BA03 will be automatically triggered as the master data is maintained in VV11. But because just opening all the 10000 sales orders in VA02 one by one be a mechanical task, you have to think of some tool for this.
May be a CATT procedure can do the trick. Else, you can just create a small program, where you can upload these sales orders and the program will just open these orders in change mode and just saves it (without making any changes). Then the output will be retriggered.
Here again, if you are printing the output directly, it is advisable to trigger the output in batch mode(Date/Time field is 1 in VV11), and then you can again trigger the printing again using the program RSNAST00 after office hours for these 10k orders.
I hope I answered ur query.
Pls lemme know if you need some more info. (You can reward me too...)

Convert sales orders to deliveries based on a release date

We are needing a way to control the launch date of a material in SAP. We want to be able to enter the order, but do not want the orders to drop until a specific launch date. For example, we may be entering orders for 2012 product in January but do not want them to drop until November 1st. We want the ATP to be confirmed for November 1st. We have had many ideas including the ones below. I am not a big fan of using blocks because they have to be added and removed manually. Have any of you experts ran across this issue before, and do you have any suggestions. Is it as simple as using the requested delivery date on the order.
1. Use the Distribution chain specific material status located in the material master, Sales 1 view.
2. Use the Exclusion (Listing/Exclusion) functionality with a validity date. This one will prevent the use of the material up to a specified date. No manual maintenance is required after setting it up. Once the specified end date is reached, the exclusion no longer applies.
3. Create a new Schedule Line Category for these materials with an automatic delivery block. This won't prevent the material to be entered into the order, but it will be blocked for delivery. When time comes, mass maintenance at sales orders having this specific SLC changed to the standard one, and re-ATP.
4. Set up a new Checking Group for Availability Check, similar to 02, but not taking into account the replenishment lead time (RLT), so the material won't be available until it is released and procured. This won't prevent the material to be entered into the order, but it won't be available for delivery.
Thanks,
Mark

I suggest to go with option 3, schedule line category with delivery block to tie with an item category. When the sales order is created, the user can select the item category, so the relevant schedule line will be automatically populated with delivery block. When there is a release, the item categories of the line items can be changed to regular item category, thereby the quantities will be confirmed. Of course as an one item settings, the item category and schedule line categories needs to be configured at the backend.
Regards,

Generate Sales Orders in mass based on Marketing Campaign (CRM 6.0)

Similar Messages

Maybe you are looking for