Generate Separate New Time Pair (not split)

Hi All-
US SAP_HCm 4.7
I am trying to generate a separate time pair (in schema TM04) for overtime (M), while keeping the planned working time (S) time pair untouched. I am basically trying to make a copy of a time pair (i.e. hours) except for changing the processing type (S to M).
Example:
TIP Table - IN
0800-1400 --- 8 hours -
(S) Planned Working Time Pair
Operation in Time
Some Clever idea ... or concept
TIP Table- OUT
0800-1400 --- 8 hours -
(S) Planned Working Time Pair
0800-1400 --- 8 hours -
(M) Overtime Time Pair
I have tried using the operation GENTG in a PCR .. but it seems very limited. Is there any SAP Time gurus out there with a clever idea?
Any help is much appreciated.
Thanks
B-

I can generate time types but the problem is that time type will be a generic time type and will be applicable to all absence classes with operation VARST or OUTTP. Until I have a time pair on a non working day and if that time pair is generated then it can be read using RTIPA OR PTIPA variables.
Otherise for every absence type it will generate 8 hours but I want 8 hours to be generated wtih PL and CL only. If i give LOP or LWP then also system is generating 8 hours time type which is wrong. So until I generate a time type for the off day i cannot read 2001 or TIME PAIR TABLE.
Kindly guide.

Similar Messages

Outlook 2010 new time proposal not work

Using Exchange 2010 SP3 with Outlook 2010 SP2. Sender sends a meeting request and recipient chooses option to Propose new time, it asks to enter new time and generates a new meeting request email. This new email doesn't look like it has any meeting request
details in it, and sender only receives a blank email showing :
The meeting was updated after the attendee sent this response.
**** has tentatively accepted and proposed a new time for this meeting.
Calendar doesn't get updated as well.
Anyone seen this before?

Hi,
Based on my research, it's an expected behavior that the meeting time cannot be updated to the new time which attendee proposed. The meeting time can only be updated by meeting organizer. In other word, if the organizer accept the new time, the meeting time
can be updated.
http://office.microsoft.com/en-001/outlook-help/propose-accept-or-decline-a-new-meeting-time-HP010356518.aspx
Thanks,
Angela Shi
TechNet Community Support

Time machine was not working. I bought a new time machine and migrated time machine files to new time capsule; not recognized by yosemite

Time machine was not working after yosemite upgrade on new and old MacBooks in my house. I bought a new time machine and migrated time machine files to new time capsule. I changed the names of the older sparse bundles to the default values. Yosemite still does not recognize them.

I presume the bought a time machine means a time capsule.
How did you migrate the Time Machine files?
From where? A Time Capsule or external drive?
It is difficult to get TM working with Yosemite.. since it doesn't work after the upgrade on the old TM backup.. it will not work on the migrated files either.
You simply start a new backup and store the old backups for a few months until you are ready to dump them.
The instructions for inheriting old backups is B5 and B6 here.
http://pondini.org/TM/Troubleshooting.html
However it is just unlikely to work.. TM in Yosemite is very different. Broken even.
I also strongly recommend people to use Carbon Copy Cloner or some other 3rd party backup until Apple get the bugs fixed. And after several months.. they are still rampant.

Brand New Time Capsule Not Saving Applications

I have a brand new T2 Time Capsule that I set up less than one week ago. All the settings appear to be fine, however when I went to restore an email client application today from the Time Capsule, I could not find any applications. My application folder in the Time Capsule does not have any applications inside the folder. I checked my TC preferences, and there is nothing listed in the backup exceptions.
Please instruct me as to how to save my applications via the Time Capsule backup process and how to access and restore them to my MacBook.

This is not normal.. TM is supposed to backup everything on the computer except what you deliberately exclude.. there is nothing you have to do to make it backup your applications.
There was a bug however in Mountain Lion.. where certain things were not backed up.
Look at D10 here. http://pondini.org/TM/Troubleshooting.html
As is often the case.. bugs are not fixed between versions rather they just carry on in different forms and new ones are added.. so far Mavericks has not been kind to TM.
My recommendation is that it is unreliable.. do not trust TM to make full complete backups.
Buy CCC or another backup software.

Why does my new Time Capsule not connect

Yesterday I bought a new 1T Time Capsule so I could back up my son's computer before he heads overseas for a university exchange.
The first hint of trouble is that my computer (MacBook Pro) spat out the CD. After several attempts I tried another CD, no problems. so it's not my drive.
Anyway, I have fully updated OS X 10.5.8 running and tried to link via Airport Utility.
Again no joy. No matter which way I wire (Ethernet cabel) the Time Capsule, via my Linksys modem/router or directly to the computer, Airport Utility says there are no wireless devices connected.
At this stage I'm not the least worried about wireless transmission. I simply want to back up my son's computer before he takes it to the airport. Since I have a day job I can't contact Apple Support during business hours and they have not been available today.
What are my options?
Desperate Dad

If you are adding the Time Capsule behind another router then you must go into "Bridged Mode". So the main router will be the only thing doing NAT and you will avoid the deadly double NAT.
With a Mac you don't need the CD/DVD. Just go to the folder /Applications/Utilities/ and launch Airport Utility (connecting via the Ethernet cable. If you are setting it behind another router Launching in Airport Utility select the Time Capsule and let it open. Then stop and look at the bottom of the pane and select "Manual. This will set up the Manual setup and buttons will appear on the top. There select "Wireless" and near the bottom of the new pane use the pull down to select "Bridged Mode". This way only the main router will be assigning IPS.
If the router is connected to the main modem to the ISP you must turn off the modem for 5 minutes so the ISP server will reassign an IP address to the NEW device. This goes for ANY router being setup on a existing modem. Now in the Manual Wireless setup if you are right behind an ISP modem set it for "Sharing a single IP" to do NAT in the Time Capsule.
The important thing is to first setup for no wireless security and then go to each device on your network to see what each device is able to receive in wireless security. Then use Airport Utility again to setup the appropriate wireless setup and security setup to your devices highest capability.
So /Applications/Utilities/Airport Utility is your Time Capsule setup device.
Message was edited by: satcomer

New Time capsule not connecting to wifi, New Time capsule not connecting to wifi

I just got a 2T time capsule, and it picked it up on the wifi the first time, and I went through and clicked what I wanted for it, but now it's not getting picked up on the wifi. It's about as useful as a brick right now.
I'm on an imac and I just want to use it for backup, and not a router. I want to do half for time machine backup, and then half for movie files to access from the time Capsule on my iMac.

Are you using join a wireless network on the TC?? This is a mess..
Please describe the whole existing networking.. and how you are trying to fit the TC into it.

Help! new time capsule not setting up on 2nd computer

I recently got time capsule for my desktop and laptop. I was able to set it up on the laptop but it's not working on the desktop. It keeps asking me to go through the set up process all over again, even though it is telling me that time capsule is already all set up and working fine. Any suggestions greatly appreciated.

I presume you are running Mountain Lion and 6.2 utility.. we need to know that.
You should not need to setup the TC at all from second device.. it is setup and working on laptop.. that is enough.
On the desktop it should be accessible in the same way as the laptop.. same name same passwords etc.
If not, then fill us in on the whole network layout.
Modem what kind.. what broadband.
Is the Modem a router?
Is the TC plugged into the modem.. in bridge or router mode?
I guess the laptop is connected by wireless? Desktop is connected how?
Are you trying to get TM to work.
Mount the disk in finder if you can. Then you should be able to direct TM to use it.

I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpaid the first before pairing the second. How do I unpair?

I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpair the first before pairing the second. If this is true, how do I unpair? If not, what can I do?

I was premature in posting the question. I found the answer in andother posting, and it was successful.
Thanks, and sorry for the false alarm.

I just get my new I pophone 4s and the icon for the face time is not showing in the screen

I just get my new I pophone 4s and the icon for the face time is not showing in the screen

There is no separate icon for FaceTime. You access it through contacts. Go into the contact you want to call and tap the FaceTime button.

Last time i used FFsync it didnt ask me about any key! there was a phrse only which it didnt work now so i generate a new code as ur guide shows me and now i lost all my data! i need them alot, i adopted on your servies :( i need my data so badly plz help

Last time i used FFsync it didnt ask me about any key! there was a phrse only which it didnt work now so i generate a new code as ur guide shows me and now i lost all my data! i need them alot, i adopted on your servies :( i need my data so badly plz help

Lord K. Thank you. Yes I am within the 90 time period, however I travel Intertionally and I can not receive not make a call to Apple. I was just at the Genius Bar in Chicago and they said, don't worry about it. It just floats out there, however, I can not recover my messages on a flash drive. I need to go back to my old computer which I don't have with me. My messages were in folders for a lawsuit. It is going to take an incredible amount of work for me to, you have no Idea. We are talking thousands of pages! I the defendent will have them during discovery so I am not so worried. However, I can not bring them to him on a Flashdrive when I meet with him without an extraordinary amount of presssure on my part. THis is not just some little email issue. This is suing EXPEDIA and Tripadviosr.com

Hello. I have an old G4 Tower at 10.4.11. The password for Keychain has been lost. How can I generate a new password for Keychain? Every time I use Safari it want me to enter the password. Any suggestions? Thank you

Hello. I have an old G4 Tower at 10.4.11. The password for Keychain has been lost. How can I generate a new password for Keychain? Every time I use Safari it wants me to enter the keychain password. Any suggestions? Thank you

See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over.
Keychain Access asks for keychain "login" after changing login password...
http://support.apple.com/kb/HT1631
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544

Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear and the setup menu says there is an error. Any idea of what is happening?

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?

What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
Tell us what network setup you are using..
If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time.

HT201412 After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to

After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to be fixed...Can this bug expected to be fixed in the next update...

Hi 1283ar.
Unfortunately, iOS 7 is too hard to push for the iPhone 4 and therefore has a lot of effects turned off to try to get it to run as smoothly as possible.
However, it becomes better and better with each update coming but it's hard to do anything about the hardware on an already released phones.
If you still have trouble or think they are too hard. My tip is, if so, to restore your iPhone 4 and make a clean setup with no iCloud backup. But all your photos in a photostream so you can access it later.

I'm having trouble backing up my second macbook to a new time capsule. continue to get an error message -- "Time Machine Error. The backup disk image could not be created." Is there something I need to change in my time capsule or time machine?

I just set up a new time capsule. it worked fine on my first macbook. But now I cannot backup my second macbook. Getting "Time Machine Error" "The backup disk image could not be created." Do I need to change settings on my time capsule to allow the second computer, or do I need to change something on the computer to allow time machine to work right?

Try #C9 in Pondini's Time Machine Troublshooting
http://pondini.org/TM/Troubleshooting.html

Generate Separate New Time Pair (not split)

Similar Messages

Maybe you are looking for