Generate TDS certificate for which the spool already exists

Hi,
I have a query.
Sometime back I have generated TDS certificate and the same was present in the spool.
I did not take any print and it was deleted from spool and no more available.
What can I do to generate the same certificate ?
If I go for re-printing, I get it as a duplicate certificate.
Kindly suggest
Regards
Sravan

Hi Milind,
Thanks for your prompt response.
Though we go for a Z development the print we get will be a duplicate one which may not be acceptable.
Is there any chance of retrieving the spool and generating it.
Regards
Sravan

Similar Messages

I am not able to get name of the person when he is calling for which i have already saved the no. on my contact list i have reseted my phone twice help me out

hello i have started using iphone 5 for which i downloaded my contacts from i clouds i am not able to get name of the person when he is calling for which i have already saved the no. on my contact list i have reseted my phone twice its only showing the names of the person whose no. i have saved it with the country code i am staying in india new delhi pls help me i am fed up not able to get the name of person who is calling

Sir, your Apple ID can be used as an iCloud account as well. They are both the same thing.
You can learn more from --> Set up your Apple ID for iCloud and iTunes - Apple Support

How to reverse the VAT for which I have already taken the credit ?

Hi Experts,
In case of outside state sale, I can't take VAT credit on my purchases. In year end I have to reverse the excess VAT amount for which I have already taken the credit. Please tell me how to reverse the credit taken for VAT step by step. Its very urgent.
Warm Regards,
Reva
TCS

HI,
with help of FI consultant you have to pass JV
Regards
Kailas Ugale
Edited by: kailasugale on Feb 17, 2012 3:24 PM

How to get the printout of TDS Certificate for Sec-194I and 194H in SAP

Dear Experts,
I have a requirement at the time of taking printout of TDS Certificate for Sec-194I and 194H Printer got hanged and could not be able to take printout.But when printer got OK,user took printout of the said TDS certificate but Acknowledgment Number is not getting print.
How can i get the printout of certificate with acknowledgment Number and all details.
Yours' help would be appreciable.
Thanks&Regards

Hi
This link will be of use to you.
http://www.sapficoconsultant.com/pdf/Extended%20Withholding%20tax%20configuration.pdf
Also check the SAP Notes 1046758, 1094944, 1062383
Regards
Sanil

BOR object for Displaying the Spool

I am trying to create work item that will display spool output.I have thought of using FM "SWW_WI_START_SIMPLE" to create a work item and will take to the display of the spool file .Can any body suggest the BOR object which I can use for displaying the spool output??
(Background of the issue-I am executing a report in background and taking out put of that on spool. After executing this I want to send that spool number in the work item to the user and from that work item a link should be generated that will take the user to the spool display.)

Hi raz
i think it will help you
Firstly go to Transaction of event trace SWE4 on the event trace
Secondly go to your transaction create one invoce
then go to SWEL it will display the BOR Triggered during the Invoice creation
In case of any issue please revert back
Donot forgot to reward points
Regards
hitesh

BSR code on TDS Certificate for Customer and vendor in india

Hi
We have a requirement to print BSR code on TDS Certificates for customer and Vendor in india.
Currently the BSR code for Customer TDS certificates picked up from Bank branch ( BNKA-BRNCH ) field and
for vendor TDS certificates picked up from Bank Key field.
There is a 3rd party sowtware running monthly to update the BNKA table. so we are not following the standard process and we are implemented another options to picked up the BSR code for TDS certificate printing on Vendor/Customers.
For Vendor TDS certificate, we implemented SAP notes 1299729 & 1338645
to print the BSR code from Tax Number1 (T012-STCD1) field and it is working fine.
For customer TDS certificate also we want program to pickup BSR code
from Tax Number1 (T012-STCD1) field
Please let me know is there any other SAP correction Notes avalible to print the BSR code on Customer TDS certificates from Tax Number1 (T012-STCD1) field.
Thanks
Risha

answews

Wrong TDS percentage is showing in TDS Certificate for partial payment

The TDS percentage is not showing correctly in the TDS certificate for partly bill payment. While adjusting the advance payment with partly bill TDS amount is adjusted with the payment correctly but while calculating the percentage system is not calculating the advance part of the TDS and printing the wrong percentage in the TDS certificate. For example
The Total Bill amount is 10000/-
Advance payment amount is 1000/-
Assume TDS percentage is 10%
Partial payment amount is 2000/-
Description     Base Amount     TDS     Percentage
Total Bill          10,000          1000     10%
Advance          1,000          100     10%
1st part Payment 2,000     190       9% (Wrong)
Rs. 10 is adjusted with the TDS advance. So the TDS percentage should be 10%.
In TDS cerficate the TDS percentage is printing wrongly. ERP Version we have 4.6C and CIN veriosn 40A.

Hi
check OSS Note No 1286144 my be it's helpful to you.
satish

How can we generate TDS Certificate in SAP

Dear SAP Experts,
Plz tell me how can we generate TDS Certificate in SAP. Thanks in advance

Hi,
Check the building block library under http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm and filter on country india
N70: External Financial Accounting Local
Regards
K.R

TS1811 Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows

Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above "
iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
"....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows 4 same

Archived - iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
Products Affected
iTunes 7 for Mac, iTunes 8 for Mac, iTunes 9 for Mac
This article has been archived and is no longer updated by Apple.
Symptoms
After installing the Mac OS X 10.4.9 Update, iTunes may be unable to properly authorize your computer to play your iTunes Store purchases.
Resolution
The following steps will delete your network preferences. Most broadband connections do not require any special settings to connect, but if your connection does or if you are not sure, please contact your ISP or network administrator for further assistance.
Important: You must be logged in as an Administrator.
Click the Finder icon in the Dock.
Choose Go to Folder from the Go menu.
Type /Library/Preferences/SystemConfiguration
Click Go.
In the Finder window, locate the file named NetworkInterfaces.plist.
Drag this file to the Trash.
Restart the computer.
Once your computer has restarted. You will not be able to connect to the Internet. Now you will need to refresh your network settings to be able to connect again.
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
To refresh your network settings, from the Location pop-up menu, choose New Location.
Type a name for your location and click OK.
Click the Apply Now at the bottom right to accept the changes.
If your network connection requires any special settings, you will need to put them back in at this point. Once you have made these changes you should be able to connect to the Internet again and authorize your computer to play your iTunes Store purchases.

Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.

I am trying to connect to SharePoint in my Office 365 environment by following https://support.office.com/article/Set-up-the-SharePoint-Online-Management-Shell-environment-7b931221-63e2-45cc-9ebc-30e042f17e2c and I am getting:
Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.
Is there some setting I need to change on the O365 side? Thanks.

Hi,
Based on your description, my understanding is that you want connect SharePoint Online using PowerShell.
Please make sure that the following software is installed.
Windows Management Framework 3.0
SharePoint Online Management Shell
And then, open the SharePoint Online Management Shell and use the Script below to test
whether it works.
$User = "[username]@[tenant].onmicrosoft.com"
$Pass = "[password]"
$creds = New-Object System.Management.Automation.PSCredential($User,(ConvertTo-SecureString $Pass -AsPlainText -Force));
Connect-SPOService -Url https://[tenant]-admin.sharepoint.com -Credential $creds
Get-SPOSite
More information:
http://blog.falchionconsulting.com/index.php/2013/01/using-powershell-to-manage-sharepoint-2013-online/
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Query to get objects list for which the current user has 'SELECT' privilege

Hi,
I want to get tables and views list for which the current user has 'SELECT' privilege excluding sytem tables and views. The privilege information for the current user is scattered in more than one system views. I have following system views
USER_TAB_PRIVS_RECD - Object grants for which the current user is the grantee
ROLE_TAB_PRIVS - describes table privileges granted to roles. Information is provided only about roles to which the user has access.
If the object privilege is granted explicitly like "GRANT ALL ON TABLE_NAME TO "USERNAME" then this privilege entry goes to USER_TAB_PRIVIS_RECD
If the object privilege is granted by ROLE. Role is created with certain object privileges. this role is assigned to user "GRANT ROLE_NAME TO "USERNAME"", then this entry goes to ROLE_TAB_PRIVS
From these findings, I have composed below query
(SELECT DISTINCT TABLE_NAME FROM USER_TAB_PRIVS_RECD) UNION (SELECT DISTINCT TABLE_NAME FROM ROLE_TAB_PRIVS WHERE PRIVILEGE = 'SELECT')
Have I got user's all prvilege details? should I look some other system views?
How to exclude system table privileges details?
(SELECT DISTINCT TABLE_NAME FROM USER_TAB_PRIVS_RECD) UNION (SELECT DISTINCT TABLE_NAME FROM ROLE_TAB_PRIVS WHERE PRIVILEGE = 'SELECT' AND OWNER NOT IN ('SYS','SYSTEM') Is this right?
What about Public role in Oracle? Should I consider public role here?
Oracel Version :11g
I want make this query to work on Oracle 8i or above version
Thanks

>
I want to get tables and views list for which the current user has 'SELECT' privilege excluding sytem tables and views.
>
You will need a hierarchical query to do that.
Try this script for Listing privileges recursively for Oracle users
http://www.adp-gmbh.ch/ora/misc/recursively_list_privilege.html

Created sales order for one division, for which the material belongs to ano

Dear All,
A sales order has been created for a division 10, for which the material belongs to some other division 20 in material master.
When we are create a sales order for 10 division ( the one which we give at organzational data) at the item level the material which we select should also belong to the same division, if the material division is different as 20 the system will throw an error at sales order saying "ship-to-party so and so is not created for the sales area so and so.."
But here it's allowing me to create a sales order for division 10 with 20 Division material without any error. But this should not happen.
Checked in the document type VOV8 where at the Check division field 2 has been there.
Please suggest

Hello,
Let me explain the concept of Header division and item division...the header division is the one which gets copied from the sales area division that gets determined in the sales doc creation from SP.
The item division is the division that gets copied from the material master in the line item material.
In the Sales document type , there is a check box "Item Division". If this is marked, then system takes the division from the Mat master. if this is not marked system the system doesnt find from MMR instead it picks up from header division.
The check division controls, how the system should behave in case the header and item division differ..
Rgds,
Rags.

I reset the ipad. hoping it would help. but still it needs password for activation. the owner already forgot password for icloud as well as password of the email since it was not used since 2011. help please.

I reset the ipad. hoping it would help. but still it needs password for activation. the owner already forgot password for icloud as well as password of the email since it was not used since 2011. help please.

Your sister can go to https://iforgot.apple.com/ and see if she can recover her password.
There is nothing anybody else can do.

I have an ExportPDF subscription under an old account for which the email does not exist anymore and I have forgotten the password. Therefore I cannot reset the password. I hav created a new Adobe account so how do I get the subscription for ExportPDF m

I have an ExportPDF subscription under an old account for which the email does not exist anymore and I have forgotten the password. Therefore I cannot reset the password. I have created a new Adobe account so how do I get the subscription for ExportPDF moved to the new account?

Hi lgmmo,
I think your best best to get this resolved is to contact Adobe Customer Care. Here's the contact info: Contact Customer Care.
A quick Chat session should get you fixed up.
Please let us know if you have additional questions.
Best,
Sara

HFM deployment issue on EPMA - The application already exists

The first time I deploy the HFM application everything works fine until I try to redeploy after deleting the application. I have tried registering the application to SS and then try deleting it from there but that does not work. Here is my deployment abort details:
Submitted Time : Saturday, March 21, 2015 3:38:22 PM
Last Updated Time : Saturday, March 21, 2015 3:38:33 PM
User Name : hypadmin
Process Name :
Thread : 0
Server :
Detail : Initiating Product Action...
Generating Headers and Callback Information...
Generating Application Data...
Posting Product Request...
Waiting For Status Updates...
PRODUCT_UPDATE: Update from product
Financial Management is transforming metadata from EPMA...
Creating Application...
The application already exists.
Please help and thank you.
Gideon Seroney

Got around this issue by creating a classic application over the epma app, provision admin then delete it from consolidation admin.
Unfortunately it seems that the epma application should never have been registered like a classic app. Always perform 'deploy' and never 'register' since it get stuck in SQL data tables. Unless you are a DBA I would not suggest monkeying with the tables to begin with.
Thanks!

Generate TDS certificate for which the spool already exists

Similar Messages

Maybe you are looking for