Generate Timecode with Logic (Pro or Express)

Has anyone tried to generate timecode with Logic? I need to send it to an external device, hopefully as an LTC signal. I'm shooting a music video and would like to use logic for location playback and recording. Thanks for any and all input.

To generate you'll need a Unitor (or other gen.)-fortunately you CAN use Logic to reproduce. Set up a 'stripe' track of an audio file playing SMPTE and set it on a unique output of your interface.

Similar Messages

Oxygen 8 Keyboard, works with Garageband, not with Logic Pro 7 Express...

I have installed the proper and most current drivers...followed manufactures setups (recommended daily intake of Aspirin) and yet...nothing, nadda, no cigar...zip. Works great with Garageband though. I was able to setup Firewire Solo and got that to receive System Sounds through the headphones of the M-Audio device, but nothing from the MIDI aspect of it though. Yet....Garageband still worked. Hmmmm....curious.
I made it an Aggregate Device in the Audio setup after I disconnected the Firewire to see if that helped. Nope. Yet.....it worked in Garageband.
I've searched under every stone...said a few bad words...and yelled at the cat...wasn't my cat.
Any help is greatly appreciated...if this was already posted...sorry.
iMac G5 Mac OS X (10.4.3) M-Audio Firewire Solo

well, after the presentation we saw today, the time spent with GarageBad is better spent that the time invested in Logic. Try to find the program in the store and tell me.. it has like 50 games before.
I think it´s dead

Problem with Fader Banks and Channel in MCU PRO with Logic Pro X

I purchased a Mackie Control Universal Pro earlier this week, and I have talked with Mackie support techs twice and they have not been able to help me. My problem is that everything seems to work well with Logic X talking with the MCU with the exeption that the Fader Banks function will not move left to channels 1-8, they are stuck at channel 9-16, and will move to the right on to 17-24 and so on, but it doesnt move to 1-8 when the left fader bank motor is pressed. However when you toggle tany channel 1-8 levers on the computer screen, the corresponding lever on the Mackie goes up and down, but the reverse does not occur. The Mackie folks say this is a problem with Logic Pro X, not the MCU. Perhaps they are correct, because I still have Logic Express on my Mac and when I close Logic X and Open Logic Express the fader banks move perfectly from 1-8, 9-16, and so on as do the tracks. My computer is update with Mavericks.
I would appreciate any help! I am not a techie, an old guy who used to record on 4 track computers, and want to get away from a mouse control, but I'm going to take the Mackie MCU back if I cant get this straight, I've spent a lot of time on this. Help!

thank you Pete in Denver, I actually made some progress today, in setting up the control surface of the Logic Pro Control Surfaces Support Manual, around page sixteen gave me a partial answer. I had the Mackie icon first, then the Logic Control, and it said to drag and drop the preferred icon to the left or first place. that solved my not being able to access channels 1-8, I was able to press the fader bank left button and - voila!. so that saved my initial problem, but I still have some issues in moving faders and banks in existing projects, some tracks show up lit up in the tan colors others don't, but that is probably due to the way i would move tracks around once I received tracks on drop box from a friend and created new tracks, and I changed a lot of the order of the tracks. ANyway. I did make progress. Thanks!

Mainstage still packaged with Logic Pro?

So I wanted to get the jam packs to use in garageband but it turns out they're all in Mainstage 2 now. I am planning on upgrading to logic in a year or so and I thought mainstage came packaged with it. Do you have to purchase them separately now? Logic express used to be $199 and Logic Pro was $499. What happened to that? Are all the plugins and third party effects gone now? What is going on?

Mainstage is no longer packaged with Logic Pro.
It can be downloaded separately (with all of its JamPacky goodness) for $29.99.
Logic Express was cancelled as Logic Pro now costs what Logic Express used to cost: $199.

Control external MIDI synth with Logic Pro X

I purchaced Logic Pro X to use it as a MIDI-sequencer for my external stagepiano: the Roland RD-700sx including two expansion boards (SRX-04 and SRX-10). I want to make records to create my own music. Before I record it as audio I want to record it as MIDI, because in that form it's easier to make adjustments.
The RD-700sx is GM-compatible, though the better quality sounds are stored in certain banks, which one can select bij entering a specific number to the MIDI control assignments MSB and LSB. For example: to select the Superior Grand Piano, MSB = 87, LSB = 64 and PC (program change) = 1. To select the 60's E. Piano 2, MSB = 87, LSB = 65 and PC = 5. To select the first tone wheel organ MSB = 112, LSB = 0 and PC = 1. To select the SX Rock Kit (drums) MSB = 86, LSB = 72 and PC = 2. And to select the staccato cello on my expansion board MSB = 93, LSB = 3 and PC = 79.
I spent a lot of time searching and asking on the internet how to select the desired sounds, but I don't know how to do it. So far I know you have to create a multitimbral MIDI environment and on each of the 16 channels you can assign a bank and enter the values of MSB and LSB. I found this article: Logic Pro/Express 9: Defining Custom Bank Messages - Apple Support
I understand a part of it, though I have too little experience with Logic Pro X to get the job done. Can someone please explain it to me from the beginning to the end? You would help me a lot!!!

did you do a firmware update on 003 ?

Using Platinum Voicemaster Pro Vocal Channel Strip with Logic Pro & MBox 3

Hiya,
I was wondering if you can help me please.
I have a small little home studio that I am currently building (just to record vocals mainly to instrumentals as I am singer/songwriter).
I am currently using Logic Pro 9 and MBOX Mini 3 as my midi interface but my producer who is based overseas told me to get a preamp. Many musicians have suggested I purchase Platinum Voicemaster Pro Vocal Channel Strip. CAN ANY CONFIRM WHETHER THIS WILL WORK WITH LOGIC PRO 9 AND GIVE ANY ADVICE AS TO HOW IS THE BEST WAY TO USE IT WITH LOGIC PRO 9 AND MY MBOX MINI 3?
THANK YOU SO MUCH FOR YOUR HELP.
RUSHELLA
X

Thank you both for your input. I am back on the case again, this time with a fully functioning FCB1010. Right ou of the box the pedal does successfully send volume and pan with expression pedal a and b respectively.
What I would next like to accomplish is to have exp. ped. b now control a plug-in parameter instead, the pedal range on the fuzz-wah plug-in of Logic Pro 7 for expample.
When I use Automation Quick Access to edit the assignment of ped. b as Bryan suggested, Logic appears to be receiving the info from ped. b and creating the new assignment (as indicated in the Controller Assignments window), and yet the actual functionality doesn't change, that is, ped. b continues to control pan.
Any suggestions?
Best regards, Dan
Dual 2 GHz PowerPC G5 Mac OS X (10.4.8)

Performance issues with Logic Pro 9

Hi,
I'm experiencing quite big performance issues with Logic Pro 9:
bad midi timing and sync, user interface is kinda slowing and less reactive, ...
Mac Pro 2x2.26 Ghz Quad, 4Gb ram, early 2009, shipped with 10.5.6 now upgraded to 10.5.8
Should I upgrade to 10.6.2?
Thanx

Hi,
I'm using the same machine ...
I never get any performance issues
I bought my mac in March 2009 and I was ben ready to work in less that 3 days without issue...
so more details about your setup are required to answare!
4GB ram???
I suggest to check your ram!!!
Ram must be compatible with Xeon Nehalem Try specification!
if you add 1GB of ram from nor clear manufactor.. i suggest to disconnect the addition 1GB RAM
G

Wha wha pedal work well with GarageBand but don't want to work with logic pro 9.1.8 on my MBPro end 2011

Install on MacBook Pro end of 2011 with logic Pro 9.1.8 and Apogee GIO interface guitar
The wha wha pedal work well with GarageBand but not working with Logic Pro
Only the red light turning on and off at the screnn of the MBPro and on my Apogee GIO (Guitar Interface Midi) switch button but the effect wha wha won't work.
HOPE YOU UNDERSTAND MY ENGLISH

Pancenter...
Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
+1 on the UAD stuff....
Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
Thread 32:
0   libSystem.B.dylib
0x94c29afa mach_msg_trap + 10
1   libSystem.B.dylib
0x94c2a267 mach_msg + 68
2   ...tope.audioplugins.AU.Trash2
0x667bd57a catch_exception_raise + 250
3   libSystem.B.dylib
0x94c57259 _pthread_start + 345
4   libSystem.B.dylib
0x94c570de thread_start + 34
That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
Ken

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

Questions about Novation Remote 25SL integration with Logic Pro 8

Preface: I have to apologize in advance if this seems somewhat confusing. I'm sure some of the terms I'm using are just plain wrong - I'm somewhat of a n00b.
I have a Novation Remote 25SL configured to use AutoMap with Logic Pro 8 from Novation's website and most things are working well. It's confusing at times because sometimes I find it hard to tell what mode the keyboard is in, but that's ok - it's the least of my worries. Based on what I've seen through reading the manuals and my own experimentation, I have a couple of questions:
- Despite what the guy at the store told me, I can't seem to figure out how to select different kits from within the SL. For example, if I have a garageband instrument selected on a track - can I use the data/select knob on the SL as it is now, or do I have to program that somewhere, somehow? Or if I have Ultrabeat on a track, can I use the knob to select the different kits/banks?
- Is there a way to control non-Apple AU plugins like the rest of those which ship with Logic? All the sexy looking ones like Ringshifter, Compressor, Overdrive, etc. It seems odd that Remote will go into Mixer Automap mode and be able to control the certain portions of the instruments, but not the plugins that are automatically loaded into the channel strip when the instrument is loaded.
- I have a 25 key Remote. In Ultrabeat, I find the key maps miss a chunk of notes between where the drum pads end and where the keyboard starts (or vice-verse). Is there a way to get it so each key has a mapping? 25 keys in Ultrabeat, 25 keys on the board plus 8 drum pads - seems like there's lots of room.
Thanks in advance for all your feedback.
Message was edited by: Jason Lixfeld

Follow-up research:
Apparently there is a driver conflict between the AlphaTrack and the ReMOTE. So far I have got the ReMOTE working - sort of - in Logic using the following method which was published at Novation's Answerbase:
1. disconnect the alphatrack.
2. launch Logic and then turn on the ReMOTE SL.
3. Go into the Environment window, and add a Monitor Object. Connect it to the Remote SL's ports 2 and 3.
So far, this seems to at least get MIDI note input into Logic, but the Automap function seems a bit sketchy so far. This will depend on Novation updating Automap and the SL's firmware for Logic 8.
As noted previously, there doesn't seem to be any AlphaTrack support in Logic 8 yet and it's up to Apple to make it work. They do support their TranzPort product, so with luck there'll be support in the next update.
I'd really love to use BOTH control surfaces with Logic simultaneously -- the AlphaTrack with the Mixer and plugins, the ReMOTE with Software Instruments. I suppose it might take some interesting mapping but this doesn't seem like that strange a setup -- there are plenty of "mixer surfaces" like the M-Audio one, and the Novation Automap stuff is quite popular....

M-Audio 61ES not playing nicely with Logic Pro X!

The 61ES has been doing some really wacky things: I opened it up out of the box for the first time last night and right off the bat the middle octave of notes on the controller were very quiet compared to the high and low notes on the board. It was like the velocity wasn't working properly on those keys or something. The sounds worked fine in Logic when I pencilled them in. But I was too tired to mess around with it more, so went to bed and figured I'd deal with it in the morning. So this morning, the middle octave of keys seems fine, but the middle G just won't play at all. And many of the notes aren't tracking, or playing- especially during fast passages.
I pulled up Pro Tools 10 and the 61ES worked fine. So something is going on between the controller and Logic. Anyone have any ideas?
I'm running it on a MacBook Pro with 10.8.5. And the latest version of Logic Pro X- 10.0.6. Thanks for any advice!

Try this....
http://www.noterepeat.com/products/m-audio/usb-midi-controllers/axiom-air-series /269-m-audio-axiom-air-series-setup-with-logic-pro-x
Also make sure you have installed the latest drivers for the Air and Logic...
Axiom AIR Mini 32 Hyper Control Logic v1.0.2 (Mac)
Other that that.. Id contact M-Audio support for further help and advice
http://www.m-audio.com/support

Can I connect every USB-Audiointerface with Logic Pro?

Hello there,
please forgive me, if my english isn't so well.
So, my "problem": I actually informated me over Logic Pro X, and by the provided Audiointerfaces, I didn't saw my Audiointerface.
But - Can I simply connect a USB-Audiointerface with Logic Pro?
So, hope you understand me,
Best wishes, "toasbrot_55" (sorry for that name, i don't know when I did chosen this name)

All Mac OS compatible audio interfaces work with Logic, and almost all USB interfaces are Mac compatible. So it depends on which interface you have (make and model), and which Mac OS version you use.

Can I use digi 003 console with logic pro 10 ???

I have the new mac pro with new os mavrik and
I have the digi 003 console work with pro tools 10 perfect
I want to work with logic pro 10 and I don't know if it work with my digi 003 console
Please help me

Hi again Bill,
Something very strange has happened this morning. I was using Logic and thought 'I'll just plug in the TASCAM again to see if anything happens' and it just worked straight away. This is most peculiar as I didn't do or press anything to make it work. Yesterday when I was trying to get it to work, I closed the program and restarted the computer several times are making adjustmemnts but it just wasn't working at all. It seems a good night sleep has gievn it time to think things through lol.

Thunderbolt audio interface with Logic Pro?

Are we to get a new thunderbolt interface with Logic Pro? Avid released their stuff today!

re: Thunderbolt
bill borez wrote:
They'll be a whole load of them in the not too distant future.
hehehehe
http://www.youtube.com/watch?v=kTTSsB92L_s
at about :48

Final cut asks to buy compressor though it's installed with Logic Pro

hello,
how can I tell Final Cut that there is a version of Compressor on my mac? thanks, grts, Lucaz

So, uh, lucaz...a compressor in Logic Pro is for audio signals. Totally differnt animal. Very worthwhile, but not going to collaborrate with Logic Pro in any way that I think you're looking for.

Generate Timecode with Logic (Pro or Express)

Similar Messages

Maybe you are looking for