Generated ODS Objects

Hello All,
I have 2 questions:
1) I have loaded all my data from R/3 to ODS and now want to load from ODS to Cube. SO I have generated an export datasource by right clicking on the ODS and selecting "Generate Export..." and it gave a successful message.
   - Then I went into Infosources tree and from the menu Settings -> Display Generated Objects -> Choose "Show Generated ODS Objects".
   - Then I searched for the infosources starting with 8 but couldn't find any.
   Am I doing something wrong here? Is it the correct way to do that? Can I also upload into Cube from ODS by RC on the ODS and selecting "Update ODS Data in Data Target"? What is the difference?
2) I have loaded the Sales Orders and Item data from R/3 by selecting "Initialization" in the Infopackage. I want to do the deltas now. I checked in LBWQ and found some records for application 11 & 12. But when I check in RSA7, it is showing '0' in Total field. Why is this happening? Do I need to do anything to before it gets updated in RSA7?
Rgds,
Sharath.

Hi
There is no need for you to genereted ODS object...it will be readily available under datamart infosource for ODS objects...only for cubes we need to do that...
Search only under datamart infosources
If it is showing delta records in RSA7, try executing the infopackage with delta
if it is not showing delta records here.....for delta data records are not there in R/3
Hope this helps
Assign points if useful
Regards
N Ganesh

Similar Messages

Display Generated ODS objects

We are not able to display system generated infosources and infopackages in the Infosource DM (Datamart) application component.
I have tried Settings --> Display Generated Objects, and set to Show, but this does not generate any application components. This feature does work, however, in our other development and QA clients.
Any thoughts?
Thanks
Chad

Is the DM Application Component normally transported through to Production, or is it activated in the target client?
After further review of active Business Content in our production client, the Application Component DM is not shown as active. Guess that could be the problem!
Please confirm if we can simply transport up the DM application component.
Thanks!

"Check if the generated programs of an ODS object are up to date"

Hallo Experts,
we just made a system copy. After the system copy we recognize with the
TA: rsrv: "Check if the generated programs of an ODS object are up to date"
that the generated programs of ODS are not up to date.
Can the reason be the system copy? We don´t really know the reason.
Thank you very much.
Santra

Hi Santra,
isn't there a repair button to fix it? I can only imagine to do it manually with checking the last change date of a ods and the last change date of the update program.
regards
Siggi

Significance of BEx Reporting flag in ODS objects

Hello Masters,
I would like to know in detail, the Significance of BEx Reporting flag in ODS settings. What happens if we flag, and hat happedn when we dont ?
If, Transaction Data is loaded into the ODS, without loading the relevant Masterdata in advance, are SID's created, as it happens in cube ?
IS there a connection between SID's and ODS objects ?
best wishes,
i BI

Hi,
From SAP help : With the BEx Reporting indicator, you determine whether the ODS object is immediately available for BEx queries. If the indicator is not set, no SIDs are generated for the new characteristics when the data in the ODS object is activated. This optimizes the performance of the activation process, but the ODS object is not available as an InfoProvider for queries. Turn the indicator off for all ODS objects that are only being used for further processing of data in other data targets or that are being used in InfoSets.
http://help.sap.com/saphelp_nw04/helpdata/en/a6/1205406640c442e10000000a1550b0/content.htm
Hope this helps...

Report on standard ODS object and transactional ODS object

hi gurus
i have an infoset which is built on two transactional ODS objects and one standard ODS object which gets the data on regulr schedule. the transactional ODS obejcts get the user entered data.
when i query on the infoset, i am getting the data. and when i query on the standard ODS object i am getting the data. but when i am trying to create a query on the combination of the Infoset and the ODS object i am not getting the data.
is there any way to generate report on the standard ods object and Infoset from transactional ods objects.
your help will be greatly appreciated.
thanks in advance
vijaykumar

Hello ViJaY,
how r u ?
Try creating a MultiProvider with the Standard ODS and InfoSet.
Best Regards....
Sankar Kumar

IN ODS Object Manage tab?

hello all
In ods object manage tab in "REQUEST" tab there are options like request,data mart status of the request,PSA ID request is generated with Activation,Technical Status and so on?
what do v mean by this?
1.data mart status of the request(when this will generate)
2.PSA ID request is generated with Activation(when this will generate)and
3.Technical Status
many thanks
balaji

hi AHP
thanks for given info., but in that link I could'nt able to get info regarding this can u tell why this is needed "PSA ID REQUEST IS GENERATED WITH ACTIVATION"
and "TECHNICAL STATUS".
many thanks
balaji

Ods object must be regenerated

hi bcsgurus
lemme know when does this error occur n how do i eradicate it
i am copying the databasis and generating it.
ods object must be regenerated
data may get lost when this is is regeneated.
i tried activating the ods again too.
thanks

hi bcsgurus
Sorry for the SMS language.
thanks for the welcome
I am creating a databasis whihc is using a z123cube
and when i generate the data basis
"ods object must be regenerated
data may get lost when this is is regeneated." is the error .
i tried activating the ods again too.
is it because of using the same cube which has already been used?
let me know if i have to create another cube.
thanks

Problem with activating ODS object.

Hi experts,
I've got a problem with the activation of an ODS object. I've transported this single object from T to A system. First I got an error because one InfoObject was not yet transported to A. After I succesfully transported this InfoObjec, I tried to transport the ODS object again. But now the ODS object is not activated. I cannot activate it by hand also.
The following messages appear when I try to transport/activate this ODS object:
"No active nametab exists for /BIC/AZODEFOP50>"
"Termination due to inconsistencies"
"BIC/ZODEFOP00 (statements could not be generated)"
"Tabel /BIC/AZODEFOP50 could not be activated"
Does anybody know what is wrong and how i can solve it? I've tried to transport this ODS object several times but always the same problem. Even if I try to create this ODS object in A system by hand under the same name: ZODEFOP, I get the same errors when I want to activate it.
Please help me!
Thanx in advance,
Rgds,
Richard
Message was edited by:
        Richard Groot

Hi,
Make sure that the self system is in active form in RSA1->Source system tree.
And also make sure the RFC destination to self system is in active form.
Some times self sytem inactive or wrong path in destinations to self one creates the problem in the activation of ODS.Becuse it has to create a DS on ODS.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
        Anil Kumar Sharma

Problem in activating ods object

Hi Everyone,
I created a ods object from flat file, and while activating it gives problem.
These are the error messages:
The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The creation of the OLTP source &v1& was unsuccessful.
System response
Whilst generating the Export InfoSource, the Metadata for an R/3 OLTP source must be generated. An error arose when doing this.
Procedure
Consult the appropriate developer (function module: RSB1_OLTPSOURCE_GENERATE).
What can be done, can anyone suggest me please.
Thanks,
Prashant.

Hi Prashant,
Check the notes 459027 and 380425.
Hope it helps.
Cheers
Anurag

What is the ODS object settings?

What is the ODS object settings?

Use
When creating and changing an ODS object, you can make the following settings:
BEx Reporting
With the BEx Reporting indicator, you determine whether the ODS object is immediately available for BEx queries. If the indicator is not set, no SIDs are generated for the new characteristics when the data in the ODS object is activated. This optimizes the performance of the activation process, but the ODS object is not available as an InfoProvider for queries. Turn the indicator off for all ODS objects that are only being used for further processing of data in other data targets or that are being used in InfoSets.
ODS Object Type
Select the ODS object type. You can choose between standard and transactional, whereby standard is pre-installed and transactional is only meant for special cases. You can switch the type as long as there is still no data in the ODS object.
See also Transactional ODS Objects.
Unique Data Records
With the Unique Data Records indicator, you determine whether only unique data records are to be updated to the ODS object. This means that you cannot load a data record into the ODS object the key combination for which already exists in the system u2013 otherwise a termination occurs. Only use this setting when you are sure that only unique data records are to be loaded into the ODS object (for example, single documents). A typical application of this is in the loading of mass data. It improves the load performance.
Note
You can also deselect this indicator again (even if data has already been loaded into the ODS object). This can be necessary if you want to re-post deleted data records using a repair request (see: Tab Page: Updating). In this case, you need to deselect the Unique Data Records indicator before posting the repair request, following which you can then reset the Unique Data Records indicator once more. The regeneration of metadata of the Export DataSource, which takes place when the ODS object is reactivated, has no effect on the existing data mart delta method.
Check Table for the InfoObject
Here the name of the InfoObject is displayed for which the ODS object is also the check table, if necessary. You can specify this when creating an InfoObject. See also Tab Page: Master Data/Texts in the InfoObject maintenance.
Automatically Setting Quality Status to OK
With this indicator, you can determine that the system automatically sets the quality status to OK after loading data into the ODS object. You should turn on this function. You should only deselect this indicator if you want to check the data after it has been loaded.
Automatically Activating the ODS Object Data
With this indicator, you can establish that the data that has Quality Status OK be transferred from the activation queue into the active data table, and that the change log is updated. Activation is carried out by a new job that is started after loading into an ODS object is complete. If the activation process terminates, there can be no automatic update.
Automatically Updating Data from the ODS Object
With this indicator, you can establish that the ODS object data be automatically updated. Once it has been activated, the data is updated in the data targets. An init. update is carried out automatically with the first update. If the activation process terminates, there can be no automatic update. The update is carried out by a new job that is started once activation is complete.
Note
Only activate automatic activation and updating if you can ensure that these processes do not overlap.
If you use process chains to guarantee serial processing of the process, these settings are not supported for the object (with the exception of setting the quality status). Then you have to include the automatic processes as process types in the process chain.
Also refer to the example for Including ODS Objects in Process Chains.

Error while activating ODS Object

Hi,
I have loaded the data from R/3 to a ODS Object and the activation of ODS failed due to the following errors as shown below..
-Value '20060 ' of characteristic 0CALQUARTER is not plausible
-Error when assigning SID (details in long text)
-Activation of data records from ODS object ZODS_02 terminated
-Error getting SID for ODS object ZODS_02
I could see that Calendar Quarter as 20060 in PSA. How should i get rid of this error. Any idea would be appreciated.
Regards,
Raj

Raj,
you are getting this calender qurter from SAP right... check in RSA3 fro the your Datasource. if you are getting same value like '20060'. you can do one thing... you can set 'No Update' in Transfer Rules. you can write a routine in Update Rules for populating the data for calender Week.
you can call some standard function modules or you can write a small routine. If you want to write a routine check this thread...Re: Date to Quarter
Possibilites:
1. updtae rules
2. if RSA3(PSA) shows the value of the Quarter as '20050', if it is custom extractor(Generic using FM) you can change this.
3. If it is Standard Extractor or Generic Extractor (using either view/table or Infoset) you can enhance this. you can do the same thing in SAP Side.
All the best.
Regards,
Nagesh Ganisetti.

Linking two ODS objects using a multiprovider

Hello Gurus,
I need to link two ODS objects and both are having 3 common characteristics and the relationship between the two objects are one to many.
My questions would be....
1)When the relationship is one to many can I set it up in the multiprovider to sum it up and show in the report?
2)I have 5 other charaterstics that I need to report(Slice and dice) on, but these are not common ones to both ODS objects. Is it possible for the user to get the report based on these charaterstics also? Or do I need to make sure that these 5 also exist in both DOS objects?
Thank you,
DM

Hi Sh,
Thank you very much for your reply. But I have few concerns.
1)One to many relationship will not have any effect on the data linking since the multiprovider clubs the key figures on common characteristics. I tried this on the system and it worked.
2)The problem would be not having similar characteristics on both infoproviders. So if I want to report on the chars individually it will have a problem( Will come as non assigned values)
But the documentation says the multiprovider supports Homogenous and Heterogeneous cases. Please refer the following link.
http://help.sap.com/saphelp_nw04/helpdata/en/52/1ddc37a3f57a07e10000009b38f889/frameset.htm
I am not sure what I can do now....whether to get all the characteristics in both infoproviders by enhancing the them. Or is there another way?
And lastly the scenario I am looking at is billing and cost of goods. So I might find records in cost of goods which may not have corresponding records in billing.(There can be goods in stock which need to be billed)The problem would be the way multiprovider link records(union) so it will have all the records from both sides even if they do not correspond to each other.
Let me know what you think.
Cheers,
DM

How to create ods object with overwrite option

Hi all,
I have two ods objects for Billing and Delivery and one cube for Sales.
Billing and Delivery ODS objects are based on item level data source while sales cube is based on Schedule line level data source.
Now i want to create a new ODS object which will get the data from these there object and update the ods object.Basically i want all the sales order attributes and billing quantity and delivered quantity from the ODS objects.
how to update the new ods object in overwrite mode ??/
Regards,
Viren.

HI,
yes OK but what i mean is that (you might have a perfect reason for this) normally it's nota good idea to have an info cube as a data source (for Performance, look-up reasons etc). If your goal is to load Billing/Delivery/Sales data into one ODS, then make sure that you model this correct.
If you want to use the ODS'es as data sources I would recommend you to use and ODS as data source also for the Sales data.
Kind regards
/martin

Error while activating ODS Object (urgent)

Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.

Hi venkat,
There are only 3 info objects which i have created it and activated, only those i am pulling in the new ods but its throwing the same error what ever i do changes.
Is this issue is related to any authorization concerned?
Urs,
Raki.

Error while activating ODS Object (BIC/WAGLCATODS00 &/BIC/AGLCATODS00 )

Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.

Frank,
There is lot of free space in data base table i already checked it before.... in sm21 it showing database errors.
Strange i m unable to find out the solution.
Urs,
Raki.

Generated ODS Objects

Similar Messages

Maybe you are looking for