Generates Export DataSource doesn't bring any data

I have a Export DataSource generated from a InfoCube full of data, but when I execute the IP it deasn't bging any of this data. When I check it in RSA3 it deasn't bering anything either!
In PROD system the same DataSouce does bring data!!
What do I miss here?
Thanks

In the InfoProvider Tab, when you right click on any InfoProvider, you have the option to create the "Export Datasource" in order to take the data fomr this provider and bring it any other place and be able to schedule it through the IP.
Yes, the IP is in Full mode, but thing is that even in RSA3, it deasn't bring anything, even though the data is there!

Similar Messages

Loading master data from another infoObject (generate export datasource)

Hi All,
We are using a 0MATERIAL that is loaded every day, and we would like to use another infoObject that contains data updated every end of last month (and ont daily).
For instance, on 15th april, we would like use data from 31th march and not 15th april.
We saw that we could use "Generate export datasourse" from 0MATERIAL to the nex infoObject.
1) Is there the best solution?
2) If yes, could you explain us how to do this (generate export datasource), because we didn't do this?
3) Do we do this from InfoObject (0MATERIAL) or Infosource?
Thank you.
Edited by: Radjech Radjech on May 11, 2009 10:44 AM

Hi,
Check : [Generating the Master Data Export DataSource|http://help.sap.com/saphelp_nw04/helpdata/EN/11/1a5038d2c1ba03e10000009b38f8cf/frameset.htm] to generate export datasouce.
If MATERIAL is time dependent data then, Use To Date field as selection(31st March) to load data into new infoobject. Restict at infopackage level.
Srini

Error while generate export datasource.

Hi Experts,
APO - 3.0A(BW-2.0A)
In APO while creating generate export datasource for a cube, I am getting the following error.
Creation of InfoSource 8XXX for target system BW 1.2 failed - Message no. RSBM 026
Diagnosis - Failed to create InfoSource &v1& for target system BW 1.2.
System Response -
The InfoCube cannot be used as a data mart for a BW 1.2 target system.
Any help is highly appreciated.
Thanks&Regards,
VJ

Thanks Rebort,
Just now I completed it after searching for OSS note. Anyhow thanks for you help too.
Now I am facing a different problem. The generated DM infosource is not available under InfoSource - DM.
I have changed the ODS setting from Hide to Show
also InfoSources - RC - insert lost nodes..
no luck.. any suggestion
Regards,
VJ
Message was edited by: Vijay Kumar

Generate Export DataSource from InfoCube In Production System

Software component : BI release 7.0 SP 18
Dear Gurus,
we have a strange situation in our production system from a month till now.
We want to generate an export data source from an infocube to load data into another one but now when we try to generate in prod ( right click on infocube and select "Generate Export DataSource" ) we can't create anymore.
Following message appears :
no changes to repository and cross client customizing object allowed
and the generation is stopped.
We always did it in production system in the same way as in the other system and then transported the update rule or transformation, but now it seems that is no more possible.
No setting has been changhed in SCC4 and in object changeability. Maybe is an authorization problem or is due to any other setting?
Does anybody has a way to solve this problem?
<removed by moderator>!
Kind Regards
Stefano
Edited by: Siegfried Szameitat on Nov 24, 2008 4:18 PM

Hi Stefano,
If you want to generate an export datasource you ask your basis team to open the system so that you can do.
As per the Sap Best Practise you can do the export datasoorce in your development system and move it to the quality and after testing you transport to Production.
Generallly if you can look in to production authorizations you may have only some operation like to display only.SOme times basis may give authorizations like creation of DTP and Infopacks like that.
Regards

Export DataSource doesn't work.

Hi, experts!
I've generated export DataSource for the cube 0FIAP_C03 in BW 3.5. Cube 0FIAP_C03 contains lots of data, but when I run test rsa3 - 80FIAP_C03, I don't get any data. I have the same result in the target system BW 7.0.
I've done the same export DataSource for the cube 0FIAR_C03 and it works fine! Why I have troubles with 0FIAP_C03?
Thanks for all advices.

Problem's solved.

Generating Export DataSource

Greetings Y'all!
Can anyone tell me what the purpose for generating Export DataSources are for and what the specific sequence of steps are to generate Export DataSources?
Thank you!
Philips Manalaysay

Hi
If you want to upload a cube from another cube or from ODS the source ODS of cube should have generated export datasource. This enables the CUbe or ODS to act as source for someother Cube to feed the data
To Generate export data source Right click on the cube and in the menu Generate export datasource.
Regards
N Ganesh

What is GENERATE EXPORT DATASOURCE

Hello gurus,
When we right click on Master data infosource we have a option like GENERATE EXPORT DATASOURCE, so what is the significance of that and what actually happens when we press that.
I ll surely award points.
Thanks

Dear Khanna,
When u click on export data source option, system generates a infosource.
Actually this is required when u want to send data from one infoprovider to another infoprovider in same system or in external BIW system.
In practice some times need comes for sending data from one target to another target. In this situation this is required. Many times u first load data in to ODS and then u send it to cube, this is the typical case you need export data source.
Once you click this, system created infosource from the same. useing this infosource and creating update rule u can load data in to another target.
Hope this answers your question.
regards,
Mahendra Sane

Do we need generate export datasource in BI

Hi
We are loading 3 standard datasources to PSA and PSA to 3 DSOs and 3DSOs to one consolidated DSO and we have not generated export datasources we are able to load the data, my question is when we use generate export data source.
Thanks
Kore

Hi
As per the business requirement for a multiple BI connections we need DATAMART technology and for standalone BI we donu2019t need Datamart technology (generate export datasource)
check these thread .
What is GENERATE EXPORT DATASOURCE
https://forums.sdn.sap.com/click.jspa?searchID=10732071&messageID=4737568
Generate Export datasource BI 7
Regards
Padmanabha

Generate Export datasource for planning area

Hi,
we are using SCM 4.0 version for running Demand planning.
i have one strange problem. that is, to generate export data source for planning area, there is no option when
right clicking on planning area(context menu).is this option is available somewhere else?. please give me a clue on how to generate export datasource for planning
area in version SCM 4.0? or do i need to do some configurations?.
Thanks in advance
Ramakrishna

Hi,
You may try the following:
1) From the menu: Demand Planning->Environment->Current Settings->Administration of Demand Planning
2)From the list of planning areas, double click your Planning Area to display your planning area setup
3) Then from go to the menu Extras->Generate Datasource
Hope this helps.

SQL Developer 1.5.4.59.40 doesn't display any data or only nulls

Hi All,
I've got a problem with SQL Developer after I downloaded the latest version *1.5.4.59.40*. SQLDev doesn't display any data or displays only few lines of nulls within information tabs: Column, DATA, Constraints, Grants, Stats, triggers and so on....
Please see below screen shoots for details:
!http://www.emarcel.com/%7Eemarcelc/emarcel/SQLDEV1.gif!
And exception scratch:
!http://www.emarcel.com/%7Eemarcelc/emarcel/exception1.gif!
Note:
When I'm using an old version 1.5.0.51 everything works fine. But you know I would like to upgrade to the latest build.
Many Thanks for any help.
Cheers!!

The problem is solved by upgrading an oracle client_1 to 11g version,
Apparently these are the files which have caused the problem in old version of the oracle client (10.2.0..):
SQL Developer is using client's libs by default when it's installed for ex.:
jdbc.driver.home     /D:/oracle/product/10.2.0/client_1/
jdbc.library     /D:/oracle/product/10.2.0/client_1/jdbc/lib/ojdbc5.jar
AND:
orai18n.library     /D:/oracle/product/10.2.0/client_1/jlib/orai18n.jar
above libs are not compatible with the latest version of SQLDeveloper.
That's why the problem occurs.
Jim,
thanks for pointing me in the right direction. Cheers mate!!

I tired to restore my IPhone Backup but it doesn't download any data!

I tried to restore my IPhone Backup from ICloud but it doesn't download any data.
Starts with some pictures and then stop.
I went to Apple store, change my IPhone, tired to restore again and problem persists.
I waited several hours, change WiFi conection, change for my IPad Backup, but problem persists.
What else can I do?

I have this same issue, can anybody help??

DataMarts, Generated Export DataSources, Connecting DS to Infosources

I try to build a Data Mart Architecture and thereby an ODS with their Export DataSource gets connected with a InfoSource of an reporting cube. After generating the export DataSource, I replicated it. After this I tried to connect the InfoSource with the DataSource, but the system didnt display any custom generated DataSources (starting with 8*****) when I pressed the button select DS in InfoSource.
I checked the DataSource with RSA6 and it exist on BW myself system. I also tried insert lost nodes in Infosource and display generated objects in RSA1.
Has someone an idea what other problem it could be?
Thanks for your answer.
Cheers

hello heiko,
There is a setting that enables you to view generated objects. Go to RSA1->Settings Menu->Display generated objects->Show generated objects.

Error in generating export datasource

Hello Experts!!
I have generated export data source for an infocube. The system created the data source.
Now i implemented an SAP provided exit in the datasource, due to which one new field 0BCS_REFYP7 is added to the communication structure. This field has the property "Only visible in user exit" set. This field is only added to the datasource and not to the infocube.
Now when i try to assign the 8xxxxx system generated infosource to this datasource, the system throws an error. Because it tries to map this field to a company code field.
So, the condition is, this field is there in the datasource communication structure, but not in the infosource. So, while generating the transfer rules, it gives error.
The error says:
The following errors occured when saving mapping:
Field BCS_REFYP7 will not be delivered from datasource XXXXX in source system XXXXXX.
The data type of infoobject 0BCS_REFYP7 is incompatible with field 0COMPANY.
Can anybody suggest how this can be reslved?? Full marks are assured..
Regards,
Vikas Bittera.
Can anybody suggest

Hi Srinivas..
Thank you very much for the response..
Actually the error is not due to the Enhancement. As i am trying in a server, where the cube is without this enhancement.
Neither the cube nor the datasource have the enhancement field. And their structure is also same..
But even after replicating and generating the datasource, The system does not create the transfer rules.
In rsa1, if i goto infosources, and click to see the transfer rules.. It gives me error "Formula is not available in the table RSAFORMMAP".
Please help me!!
Thanks and Best Regards,
Vikas Bittera.
**Usefull answers will surely be rewarded**

Generate Export Datasource in Production

Hi All,
We have transported our cubes to PRoduction system. When I try to generate export data source I get an error
Changes to Repository or cross-client Customizing are not permitted.
I have set the system change options in SE06 and SE03 as modifable for Customer Name space and SAP name space.
I dont want to open the client for this purpose. because this may be a repitive process and we need to open the production client every time.
Can anybody give their thoughts on this.
Thanks in Advance,
Best Regards,
PV

Hi Stefano,
If you want to generate an export datasource you ask your basis team to open the system so that you can do.
As per the Sap Best Practise you can do the export datasoorce in your development system and move it to the quality and after testing you transport to Production.
Generallly if you can look in to production authorizations you may have only some operation like to display only.SOme times basis may give authorizations like creation of DTP and Infopacks like that.
Regards

Error while generating export datasource in Test and Prod system

Hi experts,
I tried to generate export datasorce on a cube in teh testing system so that i can use this as a datasource for another cube. I did this so that i can transport all teh relevnt objects from D to T. But Iam gettin teh following erro msg
System setting does not allow changes to be made to object ISTD 80CRM_PRI.
while Prod system produces teh follwoing error msg
Changes to Repository or cross-client Customizing are not permitted
Choose 'Display object' or 'Cancel'.
After i have done this and when i go to the context menu of teh infocube i can see maintain export datasource option.
Also I couldn't see the infosource generated in Infosources ( FYI I have already done display generated objects under settings)
Can anyone tell me how to proceed further.
Thanks,
DV

Hi DV,
Generally export datasource are not included in the request from the test server. It gets generated automatically when (ODS,Cube) based on which the datasource s transported to production / quality .
I think solution should be try not to include export datasource, infosource ,transfer rules to request from dev server.
Hope that helps.
Regards
Mr Kapadia

Generates Export DataSource doesn't bring any data

Similar Messages

Maybe you are looking for