Generating a worklist in Collection Management

Hi
I executed transaction udm_genwl to generate worklist, In the log, i got message as
Version 00000001 of collection strategy Z_AOL does not exist.
Help in this regard will be awarded with points.
Thanks
Chris

Hello,
Worklist is assigned to collection group, customer which are exist in that group worklist will generate on basing the strategy assigned.
As per SAP standard you cannot create a worklist for customer with 90+ days, but only you can add collection rule in the strategy, on basing that as criteria  worklist will generate with priority as per valuation points defined.
as per my understanding from your question please check with your business whether new criteria need to added in the collection  strategy for 90+ days  ? if so, check the valuation points for that 90+ Days & add to the existing strategy.
Naresh Garla

Similar Messages

  • Problem during Creation of Worklist in Collections Management

    Hi,
    I get the following runtime error when I run the transaction UDM_GENWL:
    Short text
        The ABAP/4 Open SQL array insert results in duplicate database records.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "CL_UDM_PARALLEL_RUN===========CP" had to be
         terminated because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
         in
        procedure "SAVE_PARALLEL_RUN" "(METHOD)", nor was it propagated by a RAISING
         clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        If you use an ABAP/4 Open SQL array insert to insert a record in
        the database and that record already exists with the same key,
        this results in a termination.
        (With an ABAP/4 Open SQL single record insert in the same error
        situation, processing does not terminate, but SY-SUBRC is set to 4.)
    Any idea what this could be due to? Is this an errorin the standard program?
    Thanks and Best Regards,
    Madhu

    Hi Mark,
    I'm selected the checkbox "Start Online" in the selection screen for Generating Worklists. So, I believe I'm running it in the foreground. As for the selection screen parameters, here they are:
    Collection Segment:  TEST_SEG
    Worklist Valid From: 10.10.2010
    Distribute Items: Yes (Checkbox selected)
    Distribution Method: Even Distribution to Collection Specialists
    Start Online: Yes (Checkbox selected)
    The master data and configuration have been made in the usual way for Collections Management as per the help documents.
    I've created a customer via the Business Partner using the Master Data Synchronization.
    Any idea what the issue could be?
    Best Regards,
    Madhu

  • Creation of Worklists in Collections Management

    Hi,
    In FSCM collections management, I did all the config and created Business partner and moved the FI-AR data to collections management without any error.
    Now, in Tcode UDM_SUPERVISOR. I dont find the entries transferred to collections management. Could anyone please let me know, whether I missed any step or how can i find the entries in the worklist.
    Thanks in advance!!!!
    Regards,
    Ameet

    Hello,
    1) Make sure the master data for your BPartner is updated (either manually or automatically) Role UDM000.
    2) Please copy the standard strategies delivered by SAP (transaction UDM_STRATEGY). It happen once that the strategies were not doing anything at runtime...
    3) Adjust your entries in UDM_GROUPS with the new strategies.
    4) Run the worklist selection again (UDM_GENWL). Make sure you mark the flag "Distribute Items" and "Start Online".
    ... now check the UDM_WL_ITEM table.
    If nothing appears, post the log given by UDM_GENWL.
    Regards, Jaime.

  • FDM_COLL_SEND_ITEMS --- FSCM Collections Management  --- V.V.V Urgent

    Hello,
    The main purpose of this BADI is to send fi-ar data to FSCM.
    The BADI FDM_COLL_SEND_ITEMS is active, so When we create a customer in XD01, we are able to see that in Business Partner Tcode BP.
    Our business requiremet is to create two additional fields to the worklist for Collection Management. So we have used the method COMPLETE_DATA  which is available in BADI FDM_COLL_SEND_ITEMS and populated additional fields which are required by the business.
    We have to execute BADI to get two additional columns in the Collections worklist, but If i execute the BADI, i am getting the message that "BAdI FDM_COLL_SEND_ITEMS is active". If i dont keep the BADI Active, i cant get the A/R data to FSCM.
    Please let me know what are the Pros and Cons If i setup "FDM_COLL_SEND_ITEMS" as a background job in my current scenario to get AR-DATA into FSCM (OR) Should i have to definitely setup "FDM_COLL_SEND_ITEMS" as an Background Job.
    Please advice me how to proceed.
    Thanks
    Rajanikanth

    Rajnikanth,
    Did you extend the BAdi to have additional fields sent to collections? for the fields to be available in the worklist i think there are two other BAdi's to be created. if you have figured out let me know as we are doing the same adding a couple of fields from the old credit management of SAP (FI-AR)
    Thanks
    Vikram

  • Collection Management Worklist

    Dear All
    We have configured the collection management in our test system and system was working fine. When we move configuration to QAS and do the testing there is no worklist created. Although we keep the same settings. We assign the collection profile and specialist to our business partner also
    Please let us know what can be the problem.
    Thanks and Best Regards

    Hi
    My problem is solved. Actually I forgot to distribute the data to collection management. Now worklist is generated. Now I have only one issue that example I create the worklist and later I change the collection strategy and then run the worklist again. But system show the old worklist. How can the worklist be updated.
    Thanks and Best Regards

  • Worklist collection management

    Ability to assign and present workflow for specific accounts to associates by  product ..
    That is we want to present worklist for to the associate A for all product A, to associate B for pr product B.
    Please guide how can we create worklist based on the product.
    Thanks
    Nik

    Hi
    My problem is solved. Actually I forgot to distribute the data to collection management. Now worklist is generated. Now I have only one issue that example I create the worklist and later I change the collection strategy and then run the worklist again. But system show the old worklist. How can the worklist be updated.
    Thanks and Best Regards

  • Getting error when creating worklists for FSCM - Collections management

    Hi All,
    I am trying to implement FSCM - Collections Management and after all the configuration in SPRO and periodic processing in SAP easy access for transferring Accounts recievable, when I try to create Worklist i get the below error "No BP rules with BP role category UDM000 exists for partner 200"
    I have created and assigned the BP role category UDM000 to my BP rule, yet i get this error. Is there anyway I can check the assignment of the rule.
    Please help me with your thoughts in getting this error fixed.
    Thanks & Regards,
    Ameet

    That's fine deep will take care
    Ameet my final options are
    1.As deep said check the validity of the BP @ BUT 100
    2.Check your config settings one again completly
      Cross-app components>master data sync>Synchronization control (check all the settings).
       Cross-app components>master data sync>customer /vendor integration>bp settings>settings for cust int -->define BP role for direction cust to BP(check you have assigned the group to the role).
    Cross-app components>master data sync>customer /vendor integration>bp settings>settings for cust int -->field assign for cust int >assign keys>define number assign from cust to bp (here check for the bp and cust group and same no fields).
    3.If you are running the the worklist gen by batch please check for the overlaps and the sufficient no of jobs available for processing.
    4.If your you are using ECC 6.3 or lesser version then apply the note 1134890
    5. The error may be mis-leading because the program always through the same error if there may be some other issues - so debug the pgm
    6. If every thing is fine above then write to SAP
    Thank you.
    Regards,
    D vasanth

  • Exclude Special G/L Transactions in Collection Management Worklist

    Hi everybody,
    We have implemented Collection Management and Dispute Management. Every day with transaction FDM_COLL_SEND01 all open items are transferred from FI-AR to FSCM-CM. After that the workslists are created successfully.
    I have noticed that all Special G/L transaction are transferred as well. This was not my intention.
    In the IMG (Financial Supply Chain Managemeny > Collections Management > Integration with Accounts Receivable Accounting > Activate Process Integration of Documents with Special G/L Indicator) it seems possible to include or exclude Special G/L items.
    The transaction suggests that when no values are entered, no Special G/L items appear in the transfer from FI-AR to FSCM-CM, which is fine. However, this seems not to work. Whatever I try in this customizing screen, the result is always that Special G/L items are available in the worklist. That's not what we want. Remarkable is that in this customizing screen, the option "exclude" is grey, which means that it cannot be used at all.
    I realize there is a BADI available and there is a possible work around that gives the possibility to filter the data in the workslist itself, but that's not the preferred option. Is there another way to exclude Specials G/L items?
    Hope that someone can help me. What am I doing wrong?
    Regards,
    Carlo

    Interesting - I dont get the Excl field. (I have gone to the far right to check)
    I managed to enter a value for a Company Code, Special GL and leave the relevant as blank.
    You need to make sure your FIN-BASIS settings are for Enh Pack 6 as well.(736) and SAP_APPL is 606

  • Collections Management - Basic questions

    Hi Experts,
    I was wondering if somebody can answer few basic questions i have on collections management.
    1. In real world, in production environment, how often do wen run tcode
    A. FDM_COLL_SEND01 (Distribution of Data to Collections Management
    B. UDM_GENWL (Creation of Worklists)
    2. Each time when i distribute data to collections management do I need to generate the worklist?
    Thanks in advance
    gj

    there is no magic answer to this question.
    The AR transfer program is normally run once a day, however some customers might run this once a week as they have weekly tasks and large lists to work through
    If you are running the transfer program, you need to run the create worklist program.
    You could also run the worklist program more than once a day or week.
    So to answer your question there is a Many to 1 relationship with the worklist creation being Many to the AR Transfer being 1.

  • Posting a incoming payment collection management

    Dear All,
    I am posting an incoming payment for an overdue item using the t.code f-28 and transfering the payment using FDM_coll_send01.
    The output details is saying that no payments updated for the customer 'x'
    If i open and see the worklist the overdue line item  of that customer is not there and in the payments tab also the payment is not appearing it is not appearing.
    Any idea of why it is not getting updated...
    thank you
    vassy

    Mahesh,
    The logs are green and to my knowledge everything has been activated.  Mind you, everything is working, including automatic synchronization of Business Partners from customer master data and open items, promise to pay etc in Collections Management.  The only piece that is not working are the payments not coming across.  The table FDM_COLL_LASTPAY is blank and thus they don't come across when you run FDM_COLL_SEND01.
    One thought I had was that the reason it is not working is because there is no company code specific data in our Business Partner master data, since company code is part of the key of the FDM_COLL_LASTPAY table.  We followed the following guide to setup the syncing of customers to Business Partners:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b001aec0-b12d-2d10-3faa-b416e6de0270
    As a result, when a customer is created, we get the following tabs in corresponding Business Partner - Address, Address Overview, Identification, Control, Payment Transactions, Status and Collection Profile.  I do not see any company code specific data at all.  I have not been able to find any information on how to bring company code level data to BPs.  Not sure if that is the right direction.
    Best regards,
    Anton

  • FSCM Collection Management with FI-AP

    Dear SAP Experts
    I am using FSCM Collections Management with FI-AR. I have linked my customer and vendor in FI-AR & FI-AP and selected clearing between the two master records, does anyone know if it is possible to pass FI-AP data (e.g. vendor credit memos) to FSCM Collections Management so that they appear on a worklist? I cannot move Contract Accounting for various external reasons.
    Thanks
    Simon

    Hi Simon,
    Yes you can. Please, make sure if this is vendor has the role that can be identified as it like a customer. Normally, by BP transaction you can see this role.
    The BP was used because this scenario. Since 6.0 version, the vendor can be customer and customer can be vendor by using unique code or BP number.
    Please, check the documentation below:
    Customer/Vendor Integration - Business Partners - SAP Library
    JPA

  • Implementing Finanacial Supply Chain Management - Collections Managment

    Dear all
    We are in the process of Implementing Financial Supply Chain Management - Collections Management. We are also looking at business content in BI 7.0 as reporting solution.
    While 0CLM_MC1 and 0CLM_MC2 are providing most of the data related to call worklist (like amount due, amount disputed, amount promised,dunning level etc etc) , an important piece of information that is crucial for debt reviews which is the text information stored in promise to pay and customer contact is missing.
    Is there any way to upload this information (Long Text)  is BI.
    Thanks & Regards
    Sachchida Nand Dubey

    Hi,
    U can go for BDC to upload ..
    i.e.
    'GUI_UPLOAD'
    In general BDC and BAPI's are used to upload the data...mainly BAPI s are used to upload the bulk data...
    if it screen flow then go for BDC upload...otherwise go for the BAPIs FM's
    Regards
    Kiran
    Edited by: Kiran Saka on Feb 9, 2009 10:52 AM

  • Problems with Sybase Database for Collection Manager in SCE2020

    We have problems with Sybase Database for Collection Manager in a SCE2020. The status is:
    [root@btl-sce-cm log]# ~scmscm/setup/alive.sh STATUS OK [root@btl-sce-cm monitor]# ./monitor.sh -a -d Test: 01db_up.sh. Status: FAIL. Message: DB is not running Test: 02cm_up.sh. Status: PASS. Message: CM is running Test: 03free_db.sh. Status: PASS. Message: 99% free space in data db Test: 04free_log.sh. Status: PASS. Message: 99% free space in log db Test: 05cm_persistent_buffers.sh. Status: FAIL. Message: The following directory/ies have more than 500 files in them - JDBCAdapter TAAdapter [root@btl-sce-cm monitor]# ~scmscm/scripts/dbtables.sh /home/scmscm/scripts/common.sh: line 43: /root/cm/bin/cm: is a directory Executing query ... /home/scmscm/scripts/dbtables.sh: line 83: /root/cm/bin/cm: is a directory [root@btl-sce-cm monitor]# df -k Filesystem           1K-blocks      Used Available Use% Mounted on /dev/mapper/VolGroup00-LogVol00                      149559596 138280700   3681636  98% / /dev/sda1               101086     20685     75182  22% /boot none                   1036624         0   1036624   0% /dev/shm
    We restored the Sybase database, but we have problems to access the database from Collection Manager and we can't obtain reports from SCE 2020.
    Here is the info:
    Problem Details: The SCA Reporter cannot generate Reports, the CM diagnostics show the following:
    [root@btl-sce-cm ~]# ~scmscm/setup/alive.sh STATUS OK
    [root@btl-sce-cm ~]# ~scmscm/scripts/dbfree.sh
    Name                    % Data Free % Log Free
    Database                        55      99
    [root@btl-sce-cm ~]# ~scmscm/scripts/dbtables.sh
    /home/scmscm/scripts/common.sh: line 43: /root/cm/bin/cm: No such file or directory Executing query ...
    /home/scmscm/scripts/dbtables.sh: line 83: /root/cm/bin/cm: No such file or directory
    [root@btl-sce-cm ~]# ~scmscm/setup/monitor/monitor.sh -d -a
    Test: 01db_up.sh. Status: FAIL. Message: DB is not running
    Test: 02cm_up.sh. Status: PASS. Message: CM is running
    Test: 03free_db.sh. Status: PASS. Message: 55% free space in data db
    Test: 04free_log.sh. Status: PASS. Message: 99% free space in log db
    Test: 05cm_persistent_buffers.sh. Status: FAIL. Message: The following directory/ies have more than 500 files in them - JDBCAdapter
    Message was edited by: EMILIO MENCIA

    Tomo:
    we have problems with our reports in Collection Manager again. We reboot the CM, but the problems continue.
    This is the log of the CM. What can be the problem? Thanks tomo
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum number of User Accounts during current sample period: 3.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum number of User Accounts since startup: 3.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum Configured Number of User Connections during current sample period: 200.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum Configured Number of User Connections since startup: 200.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum Number of User Connections during current sample period: 15.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum Number of User Connections since startup: 18.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum number of user seat licenses used during current sample period: 1.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum number of user seat licenses used since startup: 3.
    Nov  9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.78 kernel  Cannot send, host process disconnected: btllt0012  suid: 3
    Nov  9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.86 kernel  Cannot send, host process disconnected: btllt0012  suid: 3
    Nov  9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.92 server  Error: 1608, Severity: 18, State: 4
    Nov  9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.94 server  A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
    Nov  9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.94 kernel  extended error information: hostname: btllt0012 login: pqb_admin
    Nov  9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel  Cannot send, host process disconnected: btllt0012  suid: 3
    Nov  9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel  Cannot send, host process disconnected: btllt0012  suid: 3
    Nov  9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 server  Error: 1608, Severity: 18, State: 4
    Nov  9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 server  A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
    Nov  9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel  extended error information: hostname: btllt0012 login: pqb_admin
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 server  Error: 632, Severity: 20, State: 2
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 server  Attempt to move memory with an incorrect length
    of -794444483. Maximum allowed length is 16384.
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  ************************************
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  SQL causing error : =
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  ************************************
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  curdb = 4 tempdb = 2 pstat = 0x10000
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  lasterror = 632 preverror = 0 transtate = 3
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  curcmd = 0 program =                          
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  extended error information: hostname: btl-sce-cm login: pqb_admin
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08d40ca3 pcstkwalk+0x31b(0x9a78fdbc, 0x9a78fb6c, 0x0000270f, 0x00000002, 0x9a78fb6c)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08d40832 ucstkgentrace+0x13a(0x68a4006f, 0x00000002, 0x0000270f, (nil), (nil))
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08ce346d ucbacktrace+0x5d((nil), 0x00000001, (nil), 0x00000003, 0x20202020)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x082f19b8 terminate_process+0xa5c((nil), 0xffffffff, 0x9a7904c4, 0x08349a96, 0x00000278)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08349acb close_network+0xf(0x00000002, 0x9ced1ea0, 0x9a790544, 0x0834902e, 0x00000006)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08349aad hdl_default+0x45(0x00000006, 0x00000020, 0x00000014, 0x00000002, 0x9a7904fc)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x0834902e ex_raise+0x18a(0x00000006, 0x00000020, 0x00000014, 0x00000002, 0xd0a5bd3d)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08357c9b memmove_error+0x27(0xd0a5bd3d, 0x00004000, 0xffffffff, 0x0896b8a4, 0x9e3d7cfc)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x0833e54e recvhost+0xbe(0x9a7909ec, 0xd0a5bd3d, 0x00000018, 0x9e44d5d8, 0x9e44d52c)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08339160 recvchars+0x74(0x9ced2a1c, 0xd0a5bd3d, 0x9a7909ec, 0x000000ff, (nil))
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x0831e237 tdsrecv_declare+0x207(0x00000010, 0x9cecb914, 0x9a7911b4, 0x0832dd5f, (nil))
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  [Handler pc: 0x0x0863eca4 ut_handle installed by the following function:-]
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x0832e3a9 conn_hdlr+0xe49(0x00000030, 0x9a7911c8, 0x895eed31, (nil), (nil))
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08d33984 kpexit((nil), (nil), (nil), 0x9a020900, 0x00000070)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  end of stack trace, spid 11, kpid 1755578479, suid 3
    AFTER RESTART
    ov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel  SySAM: Checked out license for 1 ASE_CORE (2010.04040/permanent/148F 853E 92A9 E302).
    Nov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel  This product is licensed to: CISCO SYSTEMS, and OEM license from Sybase, Inc.
    Nov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel  Checked out license ASE_CORENov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel  Adaptive Server Enterprise (Small Business Edition)
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.02 kernel  Using config area from primary master device.
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.17 kernel  Locking shared memory into physical memory.
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.22 kernel  Internal run-time model set for Linux  - Native
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Using 1024 file descriptors.
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Adaptive Server Enterprise/15.0.2/EBF 14331/P/Linux Intel/Linux 2.4.21-47.ELsmp i686/ase1502/2486/32-bit/FBO/Thu May 24 08:15:50 2007
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Confidential property of Sybase, Inc.Nov 28 09:19:07 localhost messagebus: messagebus startup succeeded
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Copyright 1987, 2007
    Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Sybase, Inc.  All rights reserved.
    Nov 28 09:19:08 localhost rhnsd: Red Hat Network Services Daemon running with check_in interval set to 240 minutes.
    Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Unpublished rights reserved under U.S. copyright laws.
    Nov 28 09:19:08 localhost rhnsd: Red Hat Network Services Daemon running with check_in interval set to 240 minutes.
    Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel 
    Nov 28 09:19:08 localhost rhnsd[27742]: Red Hat Network Services Daemon starting up.
    Nov 28 09:19:08 localhost rhnsd: rhnsd startup succeeded
    Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  This software contains confidential and trade secret information of Sybase,
    Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Inc.   Use,  duplication or disclosure of the software and documentation by
    Nov 28 09:19:09 localhost cups-config-daemon: cups-config-daemon startup succeeded
    Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  the  U.S.  Government  is  subject  to  restrictions set forth in a license
    Nov 28 09:19:09 localhost haldaemon: haldaemon startup succeeded
    Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  agreement  between  the  Government  and  Sybase,  Inc.  or  other  written
    Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  agreement  specifying  the  Government's rights to use the software and any
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  applicable FAR provisions, for example, FAR 52.227-19.
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Sybase, Inc. One Sybase Drive, Dublin, CA 94568, USA
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Using /opt/sybase as the 'SYBASE' environment variable, found during startup.
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Using OCS-15_0 as the 'SYBASE_OCS' environment variable, found during startup.
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel  ASE booted on Linux release 2.6.9-78.0.13.ELsmp version #1 SMP Wed Jan 7 17:52:47 EST 2009.
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel  Using '/opt/sybase/ASE-15_0/pqbsyb1.cfg' for configuration information.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel  Logging ASE messages in file '/opt/sybase/ASE-15_0/install/pqbsyb1.log'.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel  Platform TCP network is forced to IPv4-only.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.32 kernel  ASE booted with TCP_NODELAY enabled.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.35 kernel  SSL Plus v5.0.4 security modules loaded successfully.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.35 kernel  Network and device connection limit is 1009.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.65 server  Number of blocks left for proc headers: 12760.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.65 server  Proc header memory allocated 2552 pages for each per engine cache
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 server  Size of the 16K memory pool: 307200 Kb
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 server  Memory allocated for the default data cache cachelet 1: 307200 Kb
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel  Enabling Linux Native Kernel asynchronous disk I/O strategy.
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel  Initializing virtual device 0, '/opt/sybase/data/master.dat' with dsync 'on'.
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel  Virtual device 0 started using asynchronous i/o.
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.17 server  Loaded default Unilib conversion handle.
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.56 kernel  Worker Thread Manager is not enabled for use in ASE.
    Nov 28 09:19:12 localhost fstab-sync[28568]: removed all generated mount points
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.58 kernel  Either the config parameter 'use security services' is set to 0, or ASE does not support use of external security mechanisms on this platform. The Security Control Layer will not be initialized. No external security mechanisms will be supported.
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.58 kernel  Unix interval timer enabled for sysclk interrupts.
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.85 kernel  Begin processing to generate RSA keypair.
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel  Completed processing to generate RSA keypair.
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel  Encryption provider initialization succeeded on engine 0.
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel  engine 0, os pid 27618  online
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 server  No active traceflags
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.08 kernel  libomni1 - Component Integration Services: usin
    g 'Sybase Client-Library/15.0/P-EBF14165 ESD #7/DRV.15.0.3/Linux Intel/Linux 2.4.21-47.0.1.ELsmp i686/BUILD1500-093/OPT/Wed Dec 13 21:46:44 2006'
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.10 server  Opening Master Database ...
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.66 server  Loading ASE's default sort order and character set
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.83 server  Recovering database 'master'.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.92 server  Started estimating recovery log boundaries for database 'master'.
    Nov 28 09:19:14 localhost kernel: mtrr: type mismatch for d8000000,2000000 old: uncachable new: write-combining
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Database 'master', checkpoint=(1831, 20), first=(1831, 20), last=(1831, 32).
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Completed estimating recovery log boundaries for database 'master'.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Started ANALYSIS pass for database 'master'.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Completed ANALYSIS pass for database 'master'.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Log contains all committed transactions until 2011/11/27 13:28:54.20 for database master.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Started REDO pass for database 'master'. The total number of log records to process is 13.
    Nov 28 09:19:14 localhost fstab-sync[28716]: added mount point /media/cdrecorder for /dev/scd0
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server  Redo pass of recovery has processed 4 committed and 0 aborted transactions.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server  Completed REDO pass for database 'master'.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server  Recovery of database 'master' will undo incomplete nested top actions.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server  Started recovery checkpoint for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.38 server  Completed recovery checkpoint for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.56 server  Started filling free space info for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.24 server  Completed filling free space info for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.26 server  Started cleaning up the default data cache for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.26 server  Completed cleaning up the default data cache for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.42 server  Checking external objects.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.40 server  Database 'master' is now online.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.40 server  The transaction log in the database 'master' will use I/O size of 16 Kb.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.67 server  Warning: ASE_HA has no valid license and therefore is not initialized.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.73 server  server name is 'pqbsyb1'
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.90 server  Activating disk 'sysprocsdev' of size 126976 KB.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 kernel  Initializing virtual device 1, '/opt/sybase/data/sysprocs.dat' with dsync 'on'.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 kernel  Virtual device 1 started using asynchronous i/o.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 server  Activating disk 'systemdbdev' of size 49152 KB.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 kernel  Initializing virtual device 2, '/opt/sybase/data/sybsysdb.dat' with dsync 'on'.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 kernel  Virtual device 2 started using asynchronous i/o.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 server  Activating disk 'apricot_data1' of size 35082660 KB.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 kernel  Initializing virtual device 3, '/opt/sybase_data/apticotdata.dat' with dsync 'off'.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 kernel  Virtual device 3 started using asynchronous (with DIRECTIO) i/o.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 server  Activating disk 'apricot_log1' of size 2980002 KB.
    Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 kernel  Initializing virtual device 4, '/opt/sybase_data/apricotlog.dat' with dsync 'off'.
    Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 kernel  Virtual device 4 started using asynchronous (with DIRECTIO) i/o.
    Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 server  Activating disk 'tempdb_dev' of size 1048576 KB.
    Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.09 kernel  Initializing virtual device 5, '/opt/sybase_data/tempdb.dat' with dsync 'off'.
    Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.09 kernel  Virtual device 5 started using asynchronous i/o.
    Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.30 server  Recovering database 'sybsystemdb'.
    Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.32 server  Started estimating recovery log boundaries for database 'sybsystemdb'.
    Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Database 'sybsystemdb', checkpoint=(843, 106), first=(843, 106), last=(843, 106).
    Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Completed estimating recovery log boundaries for database 'sybsystemdb'.
    Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Started ANALYSIS pass for database 'sybsystemdb'.
    Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Completed ANALYSIS pass for database 'sybsystemdb'.
    Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Log contains all committed transactions until 2011/10/25 09:55:36.72 for database sybsystemdb.
    Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Started REDO pass for database 'sybsystemdb'. The total number of log records to process is 1.
    Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server  Completed REDO pass for database 'sybsystemdb'.
    Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server  Recovery of database 'sybsystemdb' will undo incomplete nested top actions.
    Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server  Started recovery checkpoint for database 'sybsystemdb'.
    Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.46 server  Completed recovery checkpoint for database 'sybsystemdb'.
    Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.58 server  Started filling free space info for database 'sybsystemdb'.
    Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.69 server  Completed filling free space info for database 'sybsystemdb'.
    Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server  Started cleaning up the default data cache for database 'sybsystemdb'.
    Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server  Completed cleaning up the default data cache for database 'sybsystemdb'.
    Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server  Boot Count: 13
    Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.81 server  Checking external objects.
    Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:14.18 server  The transaction log in the database 'sybsystemdb' will use I/O size of 16 Kb.
    Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.59 server  Completed recovery checkpoint for database 'model'.
    Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.70 server  Started filling free space info for database 'model'.
    Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.72 server  Completed filling free space info for database 'model'.
    Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.74 server  Started cleaning up the default data cache for database 'model'.
    Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.74 server  Completed cleaning up the default data cache for database 'model'.
    Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.77 server  Checking external objects.
    Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.07 server  The transaction log in the database 'model' will use I/O size of 16 Kb.
    Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server  Database 'model' is now online.
    Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server  The logical pagesize of the server is 16 Kb.
    Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server  0 dump conditions detected at boot time
    Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server  Clearing temp db
    Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:18.37 server  Processed 27 allocation unit(s) out of 262 units (allocation page 6656). 10% completed.
    Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:19.51 server  Processed 53 allocation unit(s) out of 262 units (allocation page 13312). 20% completed.
    Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:20.81 server  Processed 79 allocation unit(s) out of 262 units (allocation page 19968). 30% completed.
    Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:22.19 server  Processed 105 allocation unit(s) out of 262 units (allocation page 26624). 40% completed.
    Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:23.52 server  Processed 131 allocation unit(s) out of 262 units (allocation page 33280). 50% completed.
    Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:24.96 server  Processed 158 allocation unit(s) out of 262 units (allocation page 40192). 60% completed.
    Nov 28 09:19:27 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:27.08 server  Processed 184 allocation unit(s) out of 262 units (allocation page 46848). 70% completed.
    Nov 28 09:19:29 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:29.94 server  Processed 210 allocation unit(s) out of 262 units (allocation page 53504). 80% completed.
    Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.01 server  Processed 236 allocation unit(s) out of 262 units (allocation page 60160). 90% completed.
    Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.57 server  Processed 262 allocation unit(s) out of 262 units (allocation page 66816). 100% completed.
    Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.84 server  The transaction log in the database 'tempdb' will use I/O size of 16 Kb.
    Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.86 server  Database 'tempdb' is now online.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.06 server  Recovering database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.08 server  Started estimating recovery log boundaries for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Database 'sybsystemprocs', checkpoint=(6333, 93), first=(6333, 93), last=(6333, 93).
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Completed estimating recovery log boundaries for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Started ANALYSIS pass for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Completed ANALYSIS pass for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Log contains all committed transactions until 2011/10/25 09:55:36.72 for database sybsystemprocs.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Started REDO pass for database 'sybsystemprocs'. The total number of log records to process is 1.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Completed REDO pass for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Recovery of database 'sybsystemprocs' will undo incomplete nested top actions.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Started recovery checkpoint for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.18 server  Completed recovery checkpoint for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.20 server  Started filling free space info for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.39 server  Completed filling free space info for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.40 server  Started cleaning up the default data cache for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.40 server  Completed cleaning up the default data cache for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.41 server  Checking external objects.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.04 server  The transaction log in the database 'sybsystemprocs' will use I/O size of 16 Kb.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.09 server  Database 'sybsystemprocs' is now online.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00008:2011/11/28 09:19:34.23 kernel  network name localhost.localdomain, interface IPv4, address 10.1.1.33, type tcp, port 4100, filter NONE
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00008:2011/11/28 09:19:34.23 kernel  network name localhost.localdomain, interface IPv4, address 127.0.0.1, type tcp, port 4100, filter NONE
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server  Recovery has tuned the size of '128K' pool in 'default data cache' to benefit recovery performance. The original configuration will be restored at the end of recovery.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server  Recovery has tuned the size of '16K' pool in 'default data cache' to benefit recovery performance. The original configuration will be restored at the end of recovery.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server  Recovery has tuned the '128K' pool in 'default data cache' by changing its 'local async prefetch limit' from 10 to 80. The original configuration will be restored at the end of recovery.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server  Recovery has tuned the '16K' pool in 'default data cache' by changing its 'local async prefetch limit' from 10 to 80. The original configuration will be restored at the end of recovery.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server  The server will recover databases serially.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.81 server  Recovering database 'apricot'.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.82 server  Started estimating recovery log boundaries for database 'apricot'.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Database 'apricot', checkpoint=(2358271, 12), first=(2358271, 11), last=(2358275, 172).
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Completed estimating recovery log boundaries for database 'apricot'.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Started ANALYSIS pass for database 'apricot'.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Completed ANALYSIS pass for database 'apricot'.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Log contains all committed transactions until 2011/11/28 09:16:20.68 for database apricot.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Started REDO pass for database 'apricot'. The total number of log records to process is 846.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.10 server  Redo pass of recovery has processed 2 committed and 138 aborted transactions.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.10 server  Completed REDO pass for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.11 server  Recovery of database 'apricot' will undo incomplete nested top actions.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.11 server  Started recovery checkpoint for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.29 server  Completed recovery checkpoint for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.35 server  Started filling free space info for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.47 server  Completed filling free space info for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.51 server  Started cleaning up the default data cache for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.51 server  Completed cleaning up the default data cache for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.55 server  Checking external objects.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.30 server  The transaction log in the database 'apricot' will use I/O size of 16 Kb.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.31 server  Database 'apricot' is now online.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.34 server  Recovery has restored the value of 'local async prefetch limit' for '128K' pool in 'default data cache' from '80' to 'DEFAULT'.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.34 server  Recovery has restored the value of 'local async prefetch limit' for '16K' pool in 'default data cache' from '80' to 'DEFAULT'.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.40 server  Recovery has restored the original size for '128K' pool and '16K' pool in 'default data cache'.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.44 server  Recovery complete.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server  ASE's default unicode sort order is 'binary'.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server  ASE's default sort order is:
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server     'bin_iso_1' (ID = 50)
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server  on top of default character set:
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server     'iso_1' (ID = 1).
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server  Master device size: 240 megabytes, or 122880 virtual pages. (A virtual page is 2048 bytes.)
    Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 kernel  Cannot send, host process disconnected: btl-sce-cm  suid: 3
    Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 server  Error: 1608, Severity: 18, State: 3
    Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 server  A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
    Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 kernel  extended error information: hostname: btl-sce-cm login: pqb_admin
    Nov 28 09:38:27 localhost sshd(pam_unix)[29201]: session opened for user root by (uid=0)

  • What else SCE couldn't do without Collection manager and Subscriber Manager for SCE?

    Can we still monitor the traffic and control the subscriber even we do not have any Collection manager and Subscriber Manager? with SCE alone couldn't analysis or control the traffic?

    Hi,
    Without CM you can not generate reports based on RDR collection process. For example if you dont have Collection Manager you can not generate reports that are predefined on the SCA Reporter or insight. Only you can do is you can poll SNMP counters/values by a s/w and you can graph them, but it is not suitable and not covers the all data that SCE collects and reports. And for the SM side if you want to communicate with a policy/external server you really need an SM, also you can use its internal Quota manager to count quota.

  • Collection Management

    Dear All
    We recently configured collection management. We already syncronized all the customer master with BP. Also assigned collection profile and collection specialist to business partner. We already transfered all the data from AR to Collection Management. Now when we try to display my worklist systme shows no data. Although when we transfered data from AR log shows that all the open items are transfered. Now only thing I am worried about is the collection strategy as I configured my own collection strategy. Can someone help me in this regard
    Thanks

    First of all, make your strategy settings at a minimum rule. For example, accept all customer open items greater than 1 u20AC/$ and you will see if your AR integration has been properly done. And only if it is positive, you can improve your strategy...
    Rgds,
    Phil.

Maybe you are looking for