Generating compound triggers on Oracle Database 11gR2
Hello SDDM users.
Does anybody have an idea how to coerce SQL Developer Data Modeler to produce Compound triggers on tables when generating DDL?
I saw there was a similar question from 2011 on this forum. Has the enhancement request been honoured yet?
Thanks for any info
regards
Wouter
Hi Mike,
Thanks for your response.
I do, however, strongly disagree with you.
Database triggers are very helpful in enforcing a system / enterprise wide consistency of the data in the datamodel.
Triggers make it possible to create data intergrity checks that are enforced for every client touching the data.
If you use procedures to do that, you will need to place them at every possible entrance to your data.
You can bet I will be using triggers for years to come.
(And I will explain it to new-to-my-company developers within minutes,.... and they will like it too :-) )
thanks again for your effort to response.
regards Wouter
Similar Messages
-
Installing Oracle Database 11gR2 on Linux with Unbreakable Ente. Kernel
Hello,
I have Oracle Linux 5.5 with Oracle's Unbreakable Enterprise Kernel.
what do I need to have/prepare to install Oracle database 11gR2 on it?
the hardware part and the partitions are done!
1-
Do I need to install/run Oracle Validated Configuration RPM? even if I have Oracle's Unbreakable Enterprise Kernel?
if yes does in means the Oracle's Unbreakable Enterprise Kernel does not prepare/configure the system to host database?
2-
With any of the above
do I still need create or edit the /etc/sysctl.conf file, and add or edit lines similar to the following:
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmall = 2097152
kernel.shmmax = 536870912
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048586
I saw allot of docs out there, but none answered these questions!
so please do not post docs or links to a general sites!
Thank you for the helpDude wrote:
The intention of Oracle UEK is quite obviously Oracle specific, so I think it is legitimate to ask why not to include the Oracle specific kernel configuration file. The UEK is a drop-in replacement for the existing kernel. Why would we include the oracle-validated configuration options into the kernel package when we already have a perfectly good oracle-validated RPM that can be used with both kernels? Also, the UEK may be Oracle specific, but it's not database specific. Keep in mind that Oracle has thousands and thousands of products. :) I run the UEK on lots and lots of servers, many of which don't run database and many of which have completely different /etc/sysctl.conf configurations.
The list of available packages and add-on's at http://public-yum.oracle.com/repo/OracleLinux/OL5/5/base/x86_64/ is growing. So perhaps it's just a matter of continued development.
Not sure what the point of this statement is: there are no plans to incorporate the oracle-validated configuration into the kernel, as it already exists in oracle-validated. -
Solaris 10 patches for Oracle Database 11gR2
Hi,
I downloaded Oracle Solaris 10 s/w from e-Delivery and got it installed. For Oracle Database 11gR2 I also need the followging patches:
120754-06: SunOS 5.10_x86 libmtsk
119961-05: SunOS 5.10_x86: Assembler
119964-14: SunOS 5.10_x86 Shared library patch for C++_x86
Though we have access to MyOracleSupport we can only download s/w patches using our support contract with Oracle and not OS patches.
Is there any other way I can get these patches.
Rgds,
Thiru.Thiru,
You won't find the patches in the patches/ directory on the DVD or the ISO image. Oracle integrates the patches directly into the packages, so there is no need to provide or install them separately.
All patches have a patch number (e.g. 120754) and a revision (e.g. 06). A newer revision of a patch always contains all fixes of the previous revisions. So try to run "showrev -p | grep 120754" instead, and you'll see that patch 120754-08 is pre-installed. As revision 08 is newer/higher than 06, the patch requirement is satisfied.
Hope that helps,
mp. -
Does Veridata have Agent for oracle database 11gr2 on linux?
Hi,
Does veridata have agent for oracle database 11gr2 on linux? From the edelivery.oracle.com, I just found the latest version is 10.2. When I installed the 10.2 version agent for oracle database 11gr2, the agent needs libnnz10.*. Does 10.2 version agent support for 11gr2 database? Thank you.http://www.oracle.com/technetwork/middleware/goldengate/downloads/index.html
PS: Google still works. ;-) -
Instillation Error Oracle Database 11gR2 SPARC
I am attempting to install Oracle Database 11gR2 on a Sun Blade2500 that is not connected to a network. I have followed the pre-instillation steps and when I attempt to run “runInstaller” I get the following error.
Exception in thread “main” java.lang.NoClassDefFoundError
at java.lsng.Class.forName0 (Native Method)
at java.lang.Class.forName (Class.java:164)
at java.awt.Toolkit$2.run (Tllokit.java:821)
at java.security.AccessCintroller.doPrivileged (Native Method)
at java.awt.Toolkit.getDefaultToolkit (Toolkit.java:804)
at com.jgoodies.looks.LookUtils.isLowResolution (Unknown Source)
at com.jgoodies.looks.LookUtils. <clinit> (Unknown Source)
at com.jgoodies.looks.plastic.PlasticLookAndFeel.<clinit> (PlasticLookAndFeel.jave:122)
at java.lang.Class.forName0 (Native Method)
at java.lang.Class.forName (Class.java:242)
at javax.swing.SwingUtilities.loadSystemClass (SwingUtilities.java:1783)
at javax.swing.UIManager.setLookAndFeel (UIManager.java:480)
at oracle.install.commons.util.Application.startup (Application.java:758)
at oracle.install.commons.flow.FlowApplication.startup (FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup (FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installet.startup (Installer.java:256)
at oracle.install.ivw.db.driver.DBInstaller.startup (DBInstaller.jave:114)
at oracle.install.ivw.db.driver.DBInstaller.main (DBInstaller.java:132)I have tied reverting the shell limits back to the default with no change in the results.
However I am having some trouble with the projmod command, my projid for the oracle user is “default” not “group.dba” and when I set the system parameters the #cat /etc/project returns the following:
system:0::::
user.root:1::::
noproject:2::::
default:3::::project.max-shm-memory=(priviledge,2147483648,deny)
group.staff:10::::
When I check the values they are all right except for the projid… do you think this will cause a problem?
Also I have attempted to edit my shell startup file as per setup documentation however I cannot open /usr/sh with a text editor am I trying to edit the wrong file? I searched for .profile and could only find setup.profile because of this I cannot set the unmask value to 022.
I am also having issues running xclock wail signed in as the oracle user I have the DISPLAY variable set properly and I can access xclock wail logged into the root user. The installer checks the monitor’s ability to run at the minimum 256 colors using xdpyinfo and returns an error saying that my DISPLAY variable may be set wrong… xdpyinfo runs fine wail logged onto the root user. I think fixing this problem may help a lot. -
Certification of Oracle Linux 6 with Oracle Database 11gR2?
Dear Oracle Corporation,
You released Oracle Database 11gR2 in September, 2009.
Then, you released Oracle Linux 6 on 12 Feb 2011.
Then, you released Oracle Linux 6.1 on 1 Jun 2011.
Then, you released Oracle Linux 6.2 on 20 Dec 2011.
And, here we are on 21 Feb 2012, and you still have not certified Oracle Database 11gR2 (your most recent and up to date version of the database that's currently available!) with Oracle Linux 6!
You think you'll get around to that, any time soon?
All my love,
-MarkHi Hans;
Thanks for answer ;)
Because it is not a certifiaction issue. It is a timing issue, and that is in the hands of the legal department. Support can do absolutely nithing about it, and if they indicate a date, the Support Analyst will likely get fired.Please imagine, let us say my company always prefer to work lastest version of server,oracle products and also OS because of company policy. If I want to use 11gR2 with lastest version there is no problem. Because Oracle suggest to use lastest oracle version because of new futures wiht less bugs. So in my company happy with to use lastes oracle products and my company always want to work oracle linux. Big bosses ask the manager " Why we are still using old OEL 5.x version, there are already new products avaliable at market, If oracle 5.x perfect why they made annoucement new products, If they not certified wiht their other products why they create new OS, is it bad to use *nix 6 instead of 5?
So I wonder thah question and Dont I have a right to get to find some answers from oracle which I pay xxx$million dolar each year for their products and their metalink support.
So if its timing issue and let us say again I am only using windows not any other OS. Why oracle publish same product for different OS? If its timing issue than there are huge difference between annoucement
You released Oracle Database 11gR2 in September, 2009.
Then, you released Oracle Linux 6 on 12 Feb 2011.
Then, you released Oracle Linux 6.1 on 1 Jun 2011.
Then, you released Oracle Linux 6.2 on 20 Dec 2011.2009 and 2012 ? It isnt big timing issue? :)
Anyway thanks for answer once more.. Let us see when some product will be certified wiht newer OS.
Regards
Helios -
Generate XML Schema from Oracle Database
Is there a utility that would allow our team to generate XML Schemas directly from existing Oracle databases? Or do you have a suggestion on how to achieve this?
Thank you.Hey, The Schema Processor is available in the Technologies section on this site. Just download it and see the samples. You will get the way for doing it. If you are having problems then just call me.
Bye.
null -
How to generate XML file from oracle database query result
Hi dudes,
as stated on the subject, can anyone suggests me how can i achieve the task stated above??
Here is a brief description of my problem:
I need to create a XML file once i query from the oracle database, and the query result returned from the database will be stored in XML file.
I'd searched around the JAXB, DOM, SAXP and the like basic concepts, but i still don't know how to start??
Any suggestions ???Read this:
http://www.cafeconleche.org/books/xmljava/chapters/ch08s05.html
You might have to read more of the book to understand that chapter. -
Error installing Oracle Database 11gR2
Hi friends,
I have a problem when trying to install the Oracle Database 11g R2 v.11.2.0.1.0, the installation wizard reports the following error messages:
- (PRVF-4354) Hard Limit: maximum open file descriptors: (Expected Value: 65536), Actual Value: 4096
- (PRVF-4132), Multiple users "root, user1" with UID "0"
As I can solve these problems install Oracle Database 11g R2.
Also present prior to these errors the following message [INS-32 055], a recommendation at this warning.
Thanks for the supportLuis_vkacito wrote:
Hi friends,
I have a problem when trying to install the Oracle Database 11g R2 v.11.2.0.1.0, the installation wizard reports the following error messages:
- (PRVF-4354) Hard Limit: maximum open file descriptors: (Expected Value: 65536), Actual Value: 4096
- (PRVF-4132), Multiple users "root, user1" with UID "0"
As I can solve these problems inastalar Oracle Database 11g R2.
Also present prior to these errors the following message [INS-32 055], a recommendation at this warning.
Thanks for the supportWhen all else fails Read The Fine Manual
http://www.oracle.com/pls/db112/portal.portal_db?selected=11&frame=
Installation Guide -
Errors while installind Oracle Database 11gR2
At the step "Oracle Database Configuration Assistant i got the following error: link
And i don't know why, and what to do. Can you help me?
Thanks!
Edited by: Roger22 on 14.07.2010 20:25Wed Jul 14 20:38:54 2010
AUD: OS Error = 1502 encountered while writing audit record
AUD: OS Error = 1502 encountered while writing audit record
Starting ORACLE instance (normal)
Wed Jul 14 20:39:13 2010
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as D:\oracle\product\11.2.0\dbhome_1\RDBMS
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in client-side pfile D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ADMIN\ORCL\PFILE\INIT.ORA on machine ROGER
System parameters with non-default values:
processes = 150
nls_language = "ROMANIAN"
nls_territory = "ROMANIA"
memory_target = 816M
control_files = "D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ORADATA\ORCL\CONTROL01.CTL"
control_files = "D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ORADATA\ORCL\CONTROL02.CTL"
db_block_size = 8192
compatible = "11.2.0.0.0"
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=orclXDB)"
audit_file_dest = "D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ADMIN\ORCL\ADUMP"
audit_trail = "DB"
db_name = "orcl"
open_cursors = 300
diagnostic_dest = "D:\ORACLE\PRODUCT\11.2.0\APP\SORIN"
Wed Jul 14 20:39:18 2010
PMON started with pid=2, OS id=5252
Wed Jul 14 20:39:18 2010
VKTM started with pid=3, OS id=4052 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Wed Jul 14 20:39:18 2010
GEN0 started with pid=4, OS id=4392
Wed Jul 14 20:39:18 2010
DIAG started with pid=5, OS id=4924
Wed Jul 14 20:39:18 2010
DBRM started with pid=6, OS id=5692
Wed Jul 14 20:39:18 2010
PSP0 started with pid=7, OS id=5120
Wed Jul 14 20:39:18 2010
DIA0 started with pid=8, OS id=3532
Wed Jul 14 20:39:19 2010
MMAN started with pid=9, OS id=4196
Wed Jul 14 20:39:19 2010
DBW0 started with pid=10, OS id=504
Wed Jul 14 20:39:19 2010
LGWR started with pid=11, OS id=1252
Wed Jul 14 20:39:19 2010
CKPT started with pid=12, OS id=3776
Wed Jul 14 20:39:19 2010
SMON started with pid=13, OS id=5408
Wed Jul 14 20:39:19 2010
RECO started with pid=14, OS id=4776
Wed Jul 14 20:39:19 2010
MMON started with pid=15, OS id=4980
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Wed Jul 14 20:39:19 2010
MMNL started with pid=16, OS id=752
starting up 1 shared server(s) ...
ORACLE_BASE from environment = D:\oracle\product\11.2.0\app\Sorin
Wed Jul 14 20:39:19 2010
AUD: OS Error = 1502 encountered while writing audit record
Wed Jul 14 20:43:13 2010
AUD: OS Error = 1502 encountered while writing audit record
AUD: OS Error = 1502 encountered while writing audit record
Wed Jul 14 20:48:34 2010
alter database open
ORA-1507 signalled during: alter database open...
alter database mount
Wed Jul 14 20:48:41 2010
ORA-00210: nu se poate deschide fisierul de control specificat
ORA-00202: fisier de control: 'D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ORADATA\ORCL\CONTROL02.CTL'
ORA-27041: fisierul nu a putut fi deschis
OSD-04002: fişierul nu a putut fi deschis
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-00210: nu se poate deschide fisierul de control specificat
ORA-00202: fisier de control: 'D:\ORACLE\PRODUCT\11.2.0\APP\SORIN\ORADATA\ORCL\CONTROL01.CTL'
ORA-27041: fisierul nu a putut fi deschis
OSD-04002: fişierul nu a putut fi deschis
O/S-Error: (OS 2) The system cannot find the file specified.
Wed Jul 14 20:48:43 2010
Checker run found 2 new persistent data failures
ORA-205 signalled during: alter database mount
...This is what that file contains
Roger.. -
DISPLAY issue Oracle Database 11gR2 Installation On Oracle Linux 6
Hello All,
I am trying to install Oracle 11gR2 on Oracle Linux 6. I get the below error when running the installer.
[oracle@oelinux database]$ pwd
/home/oracle/install/database
[oracle@oelinux database]$ ls
doc install response rpm runInstaller sshsetup stage welcome.html
[oracle@oelinux database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 38234 MB Passed
Checking swap space: must be greater than 150 MB. Actual 3023 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Appreciate your help in advance. Thanks.Dude wrote:
VNC certainly has it's beauty and advantages. I was under the impression though that the OP is trying to run OUI on a local server console that is runnig a graphical desktop. If that wasn't the case, VNC was certainly a preferable option.I have not done a local GUI console installation of Oracle in years. In fact, I'm known to start foaming at the mouth when discovering a server running X on the console, disabling it interactively, preventing initlevel 5 from ever loading X again, and leave comments of my disgust in inittab. ;-)
If I'm not mistaken then the vncserver does not need to have the X server running since the necessary support is built-in. The installation of X libraries is probably still required, but I'm not sure.It needs a X display manager. And xterm. twm does fine as display manager. Small and minimalistic. Not the greatest of ideas loading an entire Gnome desktop in VNC.
Btw, Apple Mac OS X provides seamless X11 support and uses VNC for screen sharing and even for installing a system remotely. If you use Apple Mac to access a remote Linux system, using ssh with X forwarding is very convenient as it works right out of the box without having to configure the remote Linux server.Nice. OS/X has come a long way the last few years. I recall a time when they pretended there was no "stinking" command line. :-) -
Generating hourly report from oracle database using sql developer .Help
I am working on SQL Developer 1.5.1, i need to prepare hourly record of the activity on the database, for that i have a sql query that gives me the report as per selected columns on hourly basis.I need to prepare 24 reports a day.
Each time i have to go to the query , change the date as per hours like form 22:06:2011 10:00:00 to 22:06:2011 11:00:00 and get the report and export it in excel.
I want to automate the script so that whenever i run the script , it just asks me the date and runs the script 24 times and fetch me the hourly report of whole day.
the query syntax is something like this
Select
from
where
And.......................
And...................
And......................
And req date between to-date( 22:06:2011 10:00:00) And to-date(22:06:2011 11:00:00)
Order by 7,1,2,3,4,5
Is there any possibility that i can automate the script to automatically change the hour itself and generate a report in excel 24 times?please share if you have any idea on this.
Looking forward for a response.This gives you data for the whole day and the first column tells you which hour data it is,
SELECT 'HOUR' || TO_CHAR ( req_date, 'HH24') AS hour_num,
col1,
col2,
col3
FROM table_name
WHERE TRUNC (req_date) = TO_DATE ( '22/06/2011', 'DD/MM/YYYY')G. -
Hi,
My client is planning to upgrade from 10.2.0.2 to 11.2.0.3 database(AIX 6L). Client having ORACLE 9I AS on different machine and connecting to 10.2.0.2. I am trying to check the certification details for this. but could not able to. Any references please?
I gone through MOS certification, but could not find any thing related to this combination.
I am in the way of checking further options as well..
Regards
DBA....Well, seeing as how AS 10g has been gone since 2009 Oracle Application Server 10g 9.0.4 & 9.0.4.x (Doc ID 295948.1) I'm not sure an older version would be supported. Now, that's been superseded by an alleged lifetime support policy http://www.oracle.com/us/support/library/lifetime-support-technology-069183.pdf
but that probably has a funny definition of who's life. -
Echec to install Oracle database 11gr2 in OEL5.6, OEL 5.5 and RHEL 5.6
I try to install Oracle 11gr2 in Linux with the traditionnal installation but after several installation test i am disappointed.
i make test on several distribution of Linux 64bits (OEL 5.6, OEL 5.5, RHEL 5.6) and SAME result : The installation of Oracle stop at 81 % .
I have installed the packages required with the command line : yum install oracle-validated
I thinks it's a problem of library but what library ?
Thanks you by advance.
The log of my install :
INFO: gcc -o ctxhx -m64 -L/oracledata/product/11.2.0/dbhome_3/ctx/lib/ -L/oracledata/product/11.2.0/dbhome_3/lib/ -L/oracledata/product/11.2.0/dbhome_3/lib/stubs/ /oracledata/product/11.2.0/dbhome_3/ctx/lib/ctxhx.o -L/oracledata/product/11.2.0/dbhome_3/ctx/lib/ -lm -lsc_fa -lsc_ex -lsc_da -lsc_ca -lz -lctxhx -Wl,-rpath,/oracledata/product/11.2.0/dbhome_3/ctx/lib -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lxml11 -lcore11 -lunls11 -lsnls11 -lnls11 -lcore11 -lnls11 `cat /oracledata/pro
INFO: duct/11.2.0/dbhome_3/lib/sysliblist`
INFO: /usr/bin/ld: warning: libwv_core.so, needed by /oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so, not found (try using -rpath or -rpath-link)
/usr/lib64/libstdc++.so.5: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SYSNativeFree'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SNLoadLibrary'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_da.so: undefined reference to `Win32VIn
INFO: it'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SNDestroyCriticalSection'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SNGetProcAddress'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SYSNativeAlloc'
/oracledata/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `Win32VCreateHandle'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `Win32VBailOut'
/ora
INFO: cledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `Win32VPushBailOutEx'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SPStringConcat'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_da.so: undefined reference to `Win32VDeinit'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SYSNativeLock'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `__gxx_personality_v0@CXXABI_1.2'
/oracle
INFO: data/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `Win32VGetOutputSolutionByName'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SYSNativeUnlock'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_ex.so: undefined reference to `SYSNativeReAlloc'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SNCreateCriticalSection'
/oracledata/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `Win32VGetOutputVtabl
INFO: e'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SPStringToBytes'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SPStringCopy'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SCCExceptionTrap::~SCCExceptionTrap()'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SNCompareTimes'
/oracledata/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `Win32VInitBail
INFO: Out'
/oracledata/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `SPSubstringReplace'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SNFindClose'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SNEnterCriticalSection'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SNFreeLibrary'
/oracledata/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `Win32VOnAssertionFailure'
INFO: oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SNLeaveCriticalSection'
/oracledata/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `SNGetLibrarySpec'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SCCExceptionTrap::SCCExceptionTrap(int, char const*, int)'
/oracledata/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `Win32VDebugString'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined
INFO: reference to `SNFindFirstFile'
/oracledata/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `SNSetCriticalSectionFactoryType'
/oracledata/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `Win32VGetOutputSolutionByType'
/oracledata/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `Win32VSetDefaultOutputSolutionForType'
/oracledata/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `Win32VSetHandleUserData'
/oracledata/product/11.2.0/d
INFO: bhome_3/ctx/lib/libsc_ut.so: undefined reference to `Win32VPopBailOut'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SPBytesToString'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SNFindNextFile'
collect2: ld a retourné 1 code d'état d'exécution
INFO: make: *** [ctxhx] Erreur 1
INFO: Arrêter la sortie à partir du processus généré dynamiquement.
List of my RPM
rpm -qa --qf '%{name}-%{version}-%{release}.%{arch}\n'|egrep 'compat|glibc|libstc|gcc'|sort
avahi-compat-libdns_sd-0.6.16-9.el5_5.x86_64
compat-dapl-2.0.25-2.el5_5.1.i386
compat-dapl-2.0.25-2.el5_5.1.x86_64
compat-dapl-devel-2.0.25-2.el5_5.1.i386
compat-dapl-devel-2.0.25-2.el5_5.1.x86_64
compat-dapl-utils-2.0.25-2.el5_5.1.x86_64
compat-db-4.2.52-5.1.x86_64
compat-gcc-34-3.4.6-4.1.x86_64
compat-gcc-34-c++-3.4.6-4.1.x86_64
compat-libgcc-296-2.96-138.i386
compat-libstdc++-296-2.96-138.i386
compat-libstdc++-33-3.2.3-61.i386
compat-libstdc++-33-3.2.3-61.x86_64
gcc-4.1.2-50.el5.x86_64
gcc-c++-4.1.2-50.el5.x86_64
gcc-gfortran-4.1.2-50.el5.x86_64
gcc-java-4.1.2-50.el5.x86_64
glibc-2.5-58.i686
glibc-2.5-58.x86_64
glibc-common-2.5-58.x86_64
glibc-devel-2.5-58.i386
glibc-devel-2.5-58.x86_64
glibc-headers-2.5-58.x86_64
java-1.4.2-gcj-compat-1.4.2.0-40jpp.115.x86_64
java-1.4.2-gcj-compat-devel-1.4.2.0-40jpp.115.i386
java-1.4.2-gcj-compat-devel-1.4.2.0-40jpp.115.x86_64
java-1.4.2-gcj-compat-src-1.4.2.0-40jpp.115.x86_64
libgcc-4.1.2-50.el5.i386
libgcc-4.1.2-50.el5.x86_64
My .bash_profile file
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
# Oracle Settings
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR
ORACLE_HOSTNAME=rhel56.bonifay.san; export ORACLE_HOSTNAME
ORACLE_UNQNAME=SID1; export ORACLE_UNQNAME
ORACLE_BASE=/oracledata; export ORACLE_BASE
ORACLE_HOME=/oraclebin/product/11.2.0/db_1; export ORACLE_HOME
ORACLE_SID=SID1; export ORACLE_SID
PATH=/usr/sbin:$PATH; export PATH
PATH=$ORACLE_HOME/bin:$PATH; export PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
CLASSPATH=$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATHthanks Dude.
But same result with /u01 and $PATH
For info my variables environnement, if you have a idea
HOSTNAME=OEL55.bonifay.sa
SHELL=/bin/bash
TERM=xterm
HISTSIZE=1000
ORACLE_UNQNAME=SID1
TMPDIR=/tmp
USER=oracle
LD_LIBRARY_PATH=/u01/product/11.2.0/db_1/lib:/lib:/lib64:/usr/lib:/usr/lib64
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
ORACLE_SID=SID1
ORACLE_BASE=/u01
ORACLE_HOSTNAME=OEL55.bonifay.sa
MAIL=/var/spool/mail/oracle
PATH=/u01/product/11.2.0/db_1/bin:/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin
INPUTRC=/etc/inputrc
PWD=/home/oracle
LANG=fr_FR.UTF-8
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SHLVL=1
HOME=/home/oracle
TMP=/tmp
LOGNAME=oracle
CVS_RSH=ssh
CLASSPATH=/u01/product/11.2.0/db_1/jlib:/u01/product/11.2.0/db_1/rdbms/jlib
LESSOPEN=|/usr/bin/lesspipe.sh %s
ORACLE_HOME=/u01/product/11.2.0/db_1
G_BROKEN_FILENAMES=1
_=/bin/env -
Generate .dbf file from oracle database using JDBC
Dear all,
I need to generate a .dbf file from oracle table. Anyone know how to do this using Java Programming or JDBC? please help!
thank youHi,
I assume you already have a JDBC driver for either FoxPro or DBase. If not, use the JDBC-ODBC bridge and the ODBC driver that comes with Window$.
When you issue a "Create TABLE" command the driver will automatically create a .dbf file and then you can export data to it.
Imran
Maybe you are looking for
-
File Adapter Variable structure Issue
I have a requirement where i get a flat file in the format mentioned below: 01,1218324735,73038740,021205,0601,464,80,1/ 02,73099000,12100035,1,021204,2359,/ 03,12998877650,USD,010,0,015,0,020,0,040,0,045,0,050,0,057,0,072,0,074,0/ 88,075,0,079,0,080
-
How to LOOP SELECT Query in Oracle?
Hello I have a query which use a variable (:enddate) and returns a set of data. Lets assume it gives sales totals by account for a given month (specified using the variable :enddate). So the query would look something like : SELECT ACCOUNT_NO, SUM(SA
-
I have iphoto duplicated in the Launchpad. How do I delete one?
I have iphoto duplicated in the Launchpad. How do I delete one? Also, when I import photos from a camera, each photo is imported twice - why would that happen and how can I change it? Many thanks.
-
i just built a new computer, and it's having problems playing back .mov files smoothly. the same .mov file plays back just fine in vlc. however, i need the scrolling quicktime offers. so far i've tried: -latest quicktime version -disabling directX an
-
ITunes Freezes on Mad Men page
Maybe iTunes is trying to tell me i'm too into this show, but I've been buying each episode all season long, and suddenly when I go to that specific show's page in the store, itunes freezes and crashes. I can go to every other page in the iTunes stor