Generating export datasource for an info object

Hello Guys
I am working on BW 3.5. I need to generate an export data source for an infoobject so that I can load its texts into another target IO. When I go into the infosources tab, and right click on the particular IO, it gives me the option of creating an export data source.
My question is: How do i transport this data source from DEV --> QA? Do we have to re-create the export data source in each system individually, ie DEV, QA and PROD.
Secondly, when I could see the export data source in the the BWQ source system, i tried moving the transfer rules for the DS to the target IO and it gave an error.
Error message:
Mapping between data source 80CRED_GROUPT and source system BWQCLNT100 is inconsistent
Field CRED_GROUP will not be delivered from DataSource 80CRED_GROUPT in source system BWQCLNT100
Field C_CTR_AREA will not be delivered from DataSource 80CRED_GROUPT in source system BWQCLNT100
Field LANGU will not be delivered from DataSource 80CRED_GROUPT in source system BWQCLNT100
Field TXTMD will not be delivered from DataSource 80CRED_GROUPT in source system BWQCLNT100
Why is this happening? And as i asked before, can i transport an export DS or do I create it in each environment individually? Please note: This is an export DS for an info object.

Hi Srinivas,
You can transport the export data source across the landscape(Dev to QA).
You do not eed to generate it in each system.
Also ensure that the conversion of logical system names or the source system names has been maintained.
You are right it looks like the data source creation was a problem hence it is not alllowing importing transfer rules.
You may try to recollect the export data source and transport and then once it is transported successfully replicate metadata of the self system.
Now transport the transfer rules.
Hope it works out,
Best regards,
Sunmit.

Similar Messages

Generate Export datasource for planning area

Hi,
we are using SCM 4.0 version for running Demand planning.
i have one strange problem. that is, to generate export data source for planning area, there is no option when
right clicking on planning area(context menu).is this option is available somewhere else?. please give me a clue on how to generate export datasource for planning
area in version SCM 4.0? or do i need to do some configurations?.
Thanks in advance
Ramakrishna

Hi,
You may try the following:
1) From the menu: Demand Planning->Environment->Current Settings->Administration of Demand Planning
2)From the list of planning areas, double click your Planning Area to display your planning area setup
3) Then from go to the menu Extras->Generate Datasource
Hope this helps.

Error while generate export datasource.

Hi Experts,
APO - 3.0A(BW-2.0A)
In APO while creating generate export datasource for a cube, I am getting the following error.
Creation of InfoSource 8XXX for target system BW 1.2 failed - Message no. RSBM 026
Diagnosis - Failed to create InfoSource &v1& for target system BW 1.2.
System Response -
The InfoCube cannot be used as a data mart for a BW 1.2 target system.
Any help is highly appreciated.
Thanks&Regards,
VJ

Thanks Rebort,
Just now I completed it after searching for OSS note. Anyhow thanks for you help too.
Now I am facing a different problem. The generated DM infosource is not available under InfoSource - DM.
I have changed the ODS setting from Hide to Show
also InfoSources - RC - insert lost nodes..
no luck.. any suggestion
Regards,
VJ
Message was edited by: Vijay Kumar

Generate Export DataSource from InfoCube In Production System

Software component : BI release 7.0 SP 18
Dear Gurus,
we have a strange situation in our production system from a month till now.
We want to generate an export data source from an infocube to load data into another one but now when we try to generate in prod ( right click on infocube and select "Generate Export DataSource" ) we can't create anymore.
Following message appears :
no changes to repository and cross client customizing object allowed
and the generation is stopped.
We always did it in production system in the same way as in the other system and then transported the update rule or transformation, but now it seems that is no more possible.
No setting has been changhed in SCC4 and in object changeability. Maybe is an authorization problem or is due to any other setting?
Does anybody has a way to solve this problem?
<removed by moderator>!
Kind Regards
Stefano
Edited by: Siegfried Szameitat on Nov 24, 2008 4:18 PM

Hi Stefano,
If you want to generate an export datasource you ask your basis team to open the system so that you can do.
As per the Sap Best Practise you can do the export datasoorce in your development system and move it to the quality and after testing you transport to Production.
Generallly if you can look in to production authorizations you may have only some operation like to display only.SOme times basis may give authorizations like creation of DTP and Infopacks like that.
Regards

Generating Export DataSource

Greetings Y'all!
Can anyone tell me what the purpose for generating Export DataSources are for and what the specific sequence of steps are to generate Export DataSources?
Thank you!
Philips Manalaysay

Hi
If you want to upload a cube from another cube or from ODS the source ODS of cube should have generated export datasource. This enables the CUbe or ODS to act as source for someother Cube to feed the data
To Generate export data source Right click on the cube and in the menu Generate export datasource.
Regards
N Ganesh

What is GENERATE EXPORT DATASOURCE

Hello gurus,
When we right click on Master data infosource we have a option like <u>GENERATE EXPORT DATASOURCE</u>, so what is the significance of that and what actually happens when we press that.
I ll surely award points.
Thanks

Dear Khanna,
When u click on export data source option, system generates a infosource.
Actually this is required when u want to send data from one infoprovider to another infoprovider in same system or in external BIW system.
In practice some times need comes for sending data from one target to another target. In this situation this is required. Many times u first load data in to ODS and then u send it to cube, this is the typical case you need export data source.
Once you click this, system created infosource from the same. useing this infosource and creating update rule u can load data in to another target.
Hope this answers your question.
regards,
Mahendra Sane

Loading master data from another infoObject (generate export datasource)

Hi All,
We are using a 0MATERIAL that is loaded every day, and we would like to use another infoObject that contains data updated every end of last month (and ont daily).
For instance, on 15th april, we would like use data from 31th march and not 15th april.
We saw that we could use "Generate export datasourse" from 0MATERIAL to the nex infoObject.
1) Is there the best solution?
2) If yes, could you explain us how to do this (generate export datasource), because we didn't do this?
3) Do we do this from InfoObject (0MATERIAL) or Infosource?
Thank you.
Edited by: Radjech Radjech on May 11, 2009 10:44 AM

Hi,
Check : [Generating the Master Data Export DataSource|http://help.sap.com/saphelp_nw04/helpdata/EN/11/1a5038d2c1ba03e10000009b38f8cf/frameset.htm] to generate export datasouce.
If MATERIAL is time dependent data then, Use To Date field as selection(31st March) to load data into new infoobject. Restict at infopackage level.
Srini

Do we need generate export datasource in BI

Hi
We are loading 3 standard datasources to PSA and PSA to 3 DSOs and 3DSOs to one consolidated DSO and we have not generated export datasources we are able to load the data, my question is when we use generate export data source.
Thanks
Kore

Hi
As per the business requirement for a multiple BI connections we need DATAMART technology and for standalone BI we donu2019t need Datamart technology (generate export datasource)
check these thread .
What is GENERATE EXPORT DATASOURCE
https://forums.sdn.sap.com/click.jspa?searchID=10732071&messageID=4737568
Generate Export datasource BI 7
Regards
Padmanabha

Can a web service be used as the datasource for a View Object?

Has anyone used a web service as the datasource for a View Object?
I am trying to do the same thing as "Publishing BC4J Components as a Web Service" example, except I want to recreate the View Objects on the client so that I can iterate through them and display them on a web page.
I probably have two choices:
1. Use the web service as the datasource.
2. Use a file as the datasource with no data and then populate the View Objects from the XML from the Web Service.
Please advise.
Thank you.
Richard Catlin
SAIC

You can adapt the examples provided in the BC4J Toy Store demo for how to build a programmatically-populated view object to create a view object that fetches its data from a web service.
The methods that you need to override are the same for any kind of programmatically-populated view object.

Data source for 0REGION info object

Hi.,
I need to load master data text for 0REGION info object. Can any one tell the standard data source for 0REGION.
Thanks,
selva

Hi Kumar,
Try these following data sources and choose the opt one.
    0TV_REGION_TEXT
    0CML_REGIN_TEXT
    0FS_REGCON_TEXT
    0EC_REGION_TEXT
    0REGION_TEXT.
With Regards,
Ravi Kanth.

TopLink does not generate SQL statements for inserting new objects

TopLink does not generate SQL statements for inserting new objects. Why?
Thanks in advance...

Please see the response in
Why does not unitofwork.commit write data to the database?
Regards,
Chris

Showin a variable description for an info-object depending on a user login

Hi,
Client requirement is to show a variable description for an info-object depending on a user login.
e.g. a Characteristic Name is Level1 with a description as 'Level1'. If a user in Canada logs in and see a BEx report he should be able to see the description for infoobject Level1 as 'Cost center'. A user in US may wish to see the description as 'Expense center' etc. etc.
Is it possible to do so ? If yes please let me know ASAP.
Do not get confused with language dependant texts.
Regards,
K.Manikandan.

Hi,
I don't think it is possible through standard functionality, but maybe you could try a workaround.
Create a Characteristic (say COMP) with text, and compound it with Infoobject Level1. The values and description for COMP could be
US Cost Center
CN Expense Center
You could make COMP an Authorisation relevant object and check the same with regard to user login, so that the people of sepecific country see only description relevant to their COMP.
In the report Display COMP as Description and Level1 as Key.
But do not that compounding may have an impact on the performance, also look into the implications of the same if you need to do it for a large number of reports/objects.
Hope it helps.
Cheers
Anurag
......don't forget to assign points if it helps......

Leading single ZERO for char info object

Hi All,
I have a info object which is having characteristic value. It is getting values like this
08976
076534
9865
065435
when it is coming to BW the ZEROs are skipped can some one help to get this value as it is.
IF iam having alpha converision then it add zeros as many has characteristic length define.
Please can someone help , how to get same format as it is.
Thanks

HI,
Check if you are using any conversion in the data source.
Also when you are trying to check the data, select the "do not use conversion" option to view the data.
because if you are using a char data type for the info object you're using, the leading zeroes would be as it is.
Regards,
Joe
Edited by: lazarus_joey on Feb 19, 2012 2:34 PM

Equivalent Data Field for 0EXRATEXACC Info Object

Hi Gurus,
I have created a DSO using 2lis_13_VDITM data source by installing the same Info Source. Here i am not able to find the Equivalent Data Field for 0EXRATEXACC Info Object which is in Transfer Rules.
So, Please let me know the Equivalent Data Field for 0EXRATEXACC Info Object.
Points are assigned defenetely.
Thanks in advance
Peter B

Hi,
U have a field KURRF in table KURRF
*Assign points if helpful.

In the tranformation i have deleted a rule for an info object material?

Hi all,
In the transformation i have deleted a rule for an info object material and then moved into quality. The number of columns is 10 after the material is excluded.
And the same transport moveed to production with warning messages.
the number of columns is 11 and it is not 10 when i check in the quality!!
Can anyone help me on this!!
thanks
Pooja

Hi,
As you said you removed the rule in transformation for an object (attribute) in matreila master data object.
Number of column/attrbute will remain same when you will see data in master data object (material). It is just the mapping from source is removed so you will not see any data in that attribute/column for whihc you have removed the rule/transformation.
For removing column you need to remove attribute/Info Object from Master data object (Material) attribute list.
I hope it will help.
Thanks,
S

Generating export datasource for an info object

Similar Messages

Maybe you are looking for