Generating PDF from report - migrating from 6i to 10g

hi ,
i ran my existing report which is developed in oracle 6i in 10g report builder .
i got the output perfectly.
But when i say Generate to file PDF ,I Am getting below error msg .
REP-0069 :Internal error
REP-57054:In-process job terminated:Terminated with error:
REP-214718514:Unable to retreive a string from the Report Builder message file.
REP-2147418514
can anyone tell me what should i do to overcome this ..
Thanks in Advance.

Hello,
How do you execute your Reports ?
Do you execute it from the Builder ?
If you execute it from the Builder, do you use Run Web Layout or Run Paper Layout ?
(If you have upgraded a Reports From 6i, there is no web layout , so you have to use the Run paper Layout
The web layout is something new that appeared in Reports 9.0.2)
Regard

Similar Messages

Reports Migration from 6i to 10g

In my Project we are having many reports .and we are trying to Migrate those from 6i to 10g can anyone tell me what are the suggestions i can make during this process .. i am the only person who is going to involve in complete migration solely. Any Ideas and suggestions welcome ..

Hello,
Oracle Reports: Migration from 6i to 10g
http://www.oracle.com/technology/products/reports/migration/index.html
FAQ Migration
http://www.oracle.com/technology/products/reports/htdocs/faq/faq_migration.htm
Regards

Web Analysis Report Migration from 9.3.1. to 11.1.1.3

Hi All,
We are migrating from 9.3.1 to 11.1.1.3 we have couple of web analysis reports running on the old server 9.3.1 and now i have to migrate those reports on the new server 11.1.1.3. Reports in 9.3.1 are in windows servers and it should me migrated to 11.1.1.3 which is on a solaris server. please let me me know if you have any ideas regarding this issue.
Thanks,
Ram.
Edited by: KRK on Sep 29, 2009 8:56 AM
Edited by: KRK on Nov 6, 2009 12:53 PM

Hi Vijay,
I have checked migration utility inversion 9.x basically this migration utility is compatible for reports from version 7.x to 9.x and it is not supported for reports from 9.x to 11.x ....
So i have finally fallowed a procedure.
I have exported the reports from 9.x and imported in 11.x .
Then after exporting i have pointed database connections to new 11.x version server.
Now I was facing a issue when i open a reports in read only mode (i.e as a business user) iam getting a screen where it asks for database details ( I have assigned business user read access to essbase)
Basically this reports are pointing to my old essbase server i.e version 9.x server.
Please let me if iam missing something while exporting and importing reports.
Thanks,
Ram.

Custom report migrated from 11i r12 not working

Hi,
I've a custom report developed in reports 6i in 11i env.If you run this report in 11i it's displaying data no errors. It has been migrated to R12.I tried to test this report.It's not displaying any data or errors.Is there any environment or intialization setup I need to take care of before testing this?
Thanks,
Kiran.

Please post the details of the application release, database version and OS.
What type of reports you have?
Oracle Applications Multiple Organizations Access Control for Custom Code [ID 420787.1]
Where To Set The "Operating Unit Mode" When Defining A Concurrent Program [ID 847094.1]
Multi Org Access Control (MOAC) in Oracle Purchasing [ID 397362.1]
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
Thanks,
Hussein

SSRS Reports migration from 2005 to 2008R2

Hi ..
I have couple of questions.. looking for answers
Am new to report migration. We have 1000+ of reports in 2005 which we need to migrate to 2008R2. After googling theweb i got to know that we have an third party utility RSScripter which is used to move the reports from 2005 to 2008.
Question 1:
By using the above tool i was able to migrate the reports from 2005 to 2008. However, i am not able to redeploy the reports to sub folder in 2008..
Example i have some reports in 2005 at Dev_reports\Reports\.. when i want to copy these reports to Dev_reports\Reports folder they are not moved to sub folder Reports on destination server, but rather they are copied to root folder. Is there any why
that i can copy the reports to particular folder in destination server.
Question 2:
When moved the reports from 2005 to 2008 are all the reports are automatically upgraded and copied to new server(2008)? or we need to explicitly open each and every report in 2008 and deploy to the new report server(2008)?
And my third requirement is to create couple(2) solution for the above said reports and check in them to TFS as a reporting project.
one report project with all the reports from 2005 and another with all reports from 2008.
Appreciate your responses at the earliest. As this is on top priority.. Thanks in Advance
Sri

Hi Sri,
Per my understanding that you are using the RSScripter to move the reports from SSRS 2005 from SSRS 2008 R2, now your first problem is you don't know how to move the reports from the sub folder of 2005 to an specify folder on SSRS 2008 R2, right?
I have tested on my locak enviroment and can reproduce the issue, by default, when you execute the .cmd file the report will move to the new server's root folder, for example, you have an rdl report in SSRS 2005 which path is "/Test/report1.rdl"
, when you move to the SSRS 2008 R2 using the tool it will move to the path "home/Test/report1.rdl".
If you want to move this rdl to the specify folder "home/Test0323/Test/Report1.rdl" you should do the action as below:
Create the specify folder on the SSRS 2005 but not SSRS 2008 R2, move the subfolder and the rdl in it "/Test/report1.rdl" to the specify folder
find and check the "/Test0323/Test/Report1.rdl" in the RSScripter:
the Output will have the path like "Test0323/Test/Report1.rdl",after move to the SSRS 2008 R2, it will also create the path like "/Test0323/Test/Report1.rdl"
More details information about using the RSScripter tool:
Migrating SQL Reporting Services to a new server
For the second question, Generally, reports are not upgraded when you upload a report definition file directly to the report server or SharePoint site. The report is automatically upgraded the first time it is viewed, but the stored report definition file
remains unchanged. Upgrading a report definition in SQL Server Data Tools is the only way to upgrade the .rdl file.
Similar thread:
If I upload RDL 2005 template on SQL Server
2014 then will SQL Server 2014 render it without migrating it to 2014 ?
Details information about upgrade and migration in the below articles for your reference：
Upgrading Reports
Upgrade and Migrate Reporting Services
For the third question please reference to below article:
TFS Reports using SSRS
Using TFS2010 with Visual Studio / BIDS 2008 and SQL Server Management Studio
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

How do I generate PDF and CHM files from the a command line in windows?

I am trying to set up a PC to build some documents during the night. I was looking for a way to get framemaker to generate PDF and CHM files via a command line in windows? How is this done with FrameMaker 12
Thanks for the help
Alex

Hi,
The part with generate a PDF via a jsx seems to work OK, except when FrameMaker decides that it will not work anymore. I must say I am not impressed with the stabillity of FrameMaker 12, there is room for a lot of improvement!.
I have given up on how to figure out how to get FrameMaker 12 to generate chm files via jsx scripts, any pointes are still very welcome.
The route I have taken is I make a RoboHelp project for each chm files I need to generate. The only thing this RoboHelp project contains is a link to the actual FrameMaker project I want to generate a chm file.
To make the chm I start RoboHelp with a script that
1) Opens the desired project
2) Sets the desired output chm files name
3) Generates the chm file
4) And finally quits RoboHelp
Below is a copy of the jsx in case anyone can reuse anything. And yes parameters are transfered via enviroments variable. I have later learned there is some way to read the parameters given at a command line but this seems to work so I stick to this for now.
// Get parameters
var RhProjName = $.getenv("RH_PROJ_NAME");
var RhChmName = $.getenv("RH_CHM_NAME");
var RhLogFileName = $.getenv("RH_LOGFILE_NAME");
var RhLogFile = new File(RhLogFileName);
RhLogFile.open("w", "TEXT");
RhLogFile.writeln("RH_PROJ_NAME : ", RhProjName);
RhLogFile.writeln("RH_CHM_NAME : ", RhChmName);
doc = RoboHelp.openProject (RhProjName, 1);
var sslmngr = RoboHelp.project.SSLManager;
for(var i = 1; i<=sslmngr.count; i++){
var ssl = sslmngr.item(i);
if(ssl.name == 'Microsoft HTML Help') {
 // Set the output location and file name
 ssl.setSpecificProperty("DestinationProjectName", RhChmName);
 if (doc.saveAll(true) ) {
 RhLogFile.writeln("saveAll returned TRUE");
 } else {
 RhLogFile.writeln("saveAll returned FALSE");
 if ( ssl.generate() ) {
 RhLogFile.writeln("ssl.generate returned TRUE");
 } else {
 RhLogFile.writeln("ssl.generate returned FALSE");
} else {
 // alert ("Found " + ssl.name + " dont do anything");
doc.saveAll(true);
RhLogFile.close();
RoboHelp.closeProject();
RoboHelp.quit();

Error while generating PDF with BI Publisher from APEX

Hi,
I am facing a problem which is intermittent.
I am generating a pdf from APEX which has been developed using BI Publisher.
I have linked the report to the APEX using report queries/report layouts in shared components.
The pdf used to open without any problems previously.But currently,I am getting the following error
"An error exists on this page.Acrobat may not display the page correctly.Please contact the person who created the pdf document to correct the document."
Once the Bi Publisher Services is restarted,I am able to generate the pdf.Again After sometime the same error pops up.
Has anybody faced the above error?
Any solution for the same.
Kindly reply.
Thanks and Regards,
K Tanna

in the log file,following message was shown
[050510_021134100][oracle.apps.xdo.template.FOProcessor][STATEMENT] clearInputs(Object) is called.
[050510_021134126][oracle.apps.xdo.template.FOProcessor][STATEMENT] clearInputs(Object) done. All inputs are cleared.
[050510_021134126][oracle.apps.xdo.template.FOProcessor][STATEMENT] End Memory: max=15744MB, total=237MB, free=121MB

Error while executing Report migrated from 6i to 11g

Hello,
We have migrated forms & reports from 6i to 11g.
Most of the reports work fine but we are having issue with very few reports.
Let me explain the issue here:
We have a Form that Runs a report.
The Report has a PLL which loads a C library and calls a C Function. [using ORA_FFI]
The C Function which is called has embedded SQL in it.
The Report Server Engine crashes on encountering the first Executable SQL statement. [A Select or Insert]
Need help to resolve this as we have tried a lot of things and not been successful.
Below is a gist of the errors we see in teh Report server logs:
"console~rep_test~1.log"
Nov 14, 2012 7:37:11 AM com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl <init>
WARNING: "IOP00410201: (COMM_FAILURE) Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: 190.10.97.30; port: 57343"
org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2200)
at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2221)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:205)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:218)
at com.sun.corba.se.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:101)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:152)
at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:118)
at org.omg.CORBA.portable.ObjectImpl._request(ObjectImpl.java:431)
at oracle.reports.engine._EngineClassStub.shutdown(_EngineClassStub.java:198)
at oracle.reports.server.EngineManager.shutdownEngine(EngineManager.java:1748)
at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:1330)
at oracle.reports.server.JobManager.runJobLocal(JobManager.java:2238)
at oracle.reports.server.JobManager.dispatch(JobManager.java:1467)
at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1537)
at oracle.reports.server.ConnectionPOA._invoke(ConnectionPOA.java:460)
at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:637)
at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:189)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1682)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1540)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:922)
at com.sun.corba.se.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:694)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:451)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1213)
at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.performWork(ThreadPoolImpl.java:471)
at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:500)
Caused by: java.net.ConnectException: Connection refused
at sun.nio.ch.Net.connect(Native Method)
at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:500)
at java.nio.channels.SocketChannel.open(SocketChannel.java:146)
at com.sun.corba.se.impl.transport.DefaultSocketFactoryImpl.createSocket(DefaultSocketFactoryImpl.java:60)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:188)
... 23 more
===============================================================================================================================
"rwserver_diagnostic.log"
[2012-11-14T07:37:10.969+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 12] [ecid: 0000Jf_MXxPFg4^kxS3j7k1GbGIR000003,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] EngineManager:updateEngineState Engine rwEng-0 status is 3
[2012-11-14T07:37:10.969+01:00] [reports] [NOTIFICATION:16] [REP-56004] [oracle.reports.server] [tid: 12] [ecid: 0000Jf_MXxPFg4^kxS3j7k1GbGIR000003,0] EngineInfo:setState Engine rwEng-0 state is: Running
[2012-11-14T07:37:11.294+01:00] [reports] [INCIDENT_ERROR] [REP-50125] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [URI: /reports/rwservlet/showjobs] REP-50125 : org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 208 completed: Maybe [[
org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 208 completed: Maybe
at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectionAbort(ORBUtilSystemException.java:2400)
at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectionAbort(ORBUtilSystemException.java:2418)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.readBits(SocketOrChannelConnectionImpl.java:354)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.handleEvent(SocketOrChannelConnectionImpl.java:1124)
at com.sun.corba.se.impl.transport.SelectorImpl.run(SelectorImpl.java:289)
Caused by: org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 211 completed: No
at com.sun.corba.se.impl.logging.ORBUtilSystemException.ioexceptionWhenReadingConnection(ORBUtilSystemException.java:2484)
at com.sun.corba.se.impl.logging.ORBUtilSystemException.ioexceptionWhenReadingConnection(ORBUtilSystemException.java:2502)
at com.sun.corba.se.impl.protocol.giopmsgheaders.MessageBase.readGIOPHeader(MessageBase.java:116)
at com.sun.corba.se.impl.transport.CorbaContactInfoBase.createMessageMediator(CorbaContactInfoBase.java:150)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.readBits(SocketOrChannelConnectionImpl.java:314)
... 2 more
Caused by: java.io.IOException: End-of-stream
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.readFully(SocketOrChannelConnectionImpl.java:602)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.read(SocketOrChannelConnectionImpl.java:521)
at com.sun.corba.se.impl.protocol.giopmsgheaders.MessageBase.readGIOPHeader(MessageBase.java:112)
... 4 more
[2012-11-14T07:37:11.296+01:00] [reports] [INCIDENT_ERROR] [REP-50125] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [URI: /reports/rwservlet/showjobs] REP-50125 : org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No [[
org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2200)
at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2221)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:205)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:218)
at com.sun.corba.se.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:101)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:152)
at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:118)
at org.omg.CORBA.portable.ObjectImpl._request(ObjectImpl.java:431)
at oracle.reports.engine._EngineClassStub.shutdown(_EngineClassStub.java:198)
at oracle.reports.server.EngineManager.shutdownEngine(EngineManager.java:1748)
at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:1330)
at oracle.reports.server.JobManager.runJobLocal(JobManager.java:2238)
at oracle.reports.server.JobManager.dispatch(JobManager.java:1467)
at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1537)
at oracle.reports.server.ConnectionPOA._invoke(ConnectionPOA.java:460)
at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:637)
at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:189)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1682)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1540)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:922)
at com.sun.corba.se.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:694)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:451)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1213)
at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.performWork(ThreadPoolImpl.java:471)
at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:500)
Caused by: java.net.ConnectException: Connection refused
at sun.nio.ch.Net.connect(Native Method)
at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:500)
at java.nio.channels.SocketChannel.open(SocketChannel.java:146)
at com.sun.corba.se.impl.transport.DefaultSocketFactoryImpl.createSocket(DefaultSocketFactoryImpl.java:60)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:188)
... 23 more
[2012-11-14T07:37:11.297+01:00] [reports] [NOTIFICATION:16] [REP-56004] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [URI: /reports/rwservlet/showjobs] EngineInfo:setState Engine rwEng-0 state is: Shutdown
[2012-11-14T07:37:11.297+01:00] [reports] [TRACE:32] [REP-56047] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] EngineManager:remove Reports Server shut down engine rwEng-0.
[2012-11-14T07:37:11.297+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobManager:start Using Maximum Job Retry value = 0
[2012-11-14T07:37:11.297+01:00] [reports] [NOTIFICATION:16] [REP-56016] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [URI: /reports/rwservlet/showjobs] JobManager:updateJobStatus Job 1658 status is: The report terminated with error: [[
REP-56048: Engine rwEng-0 crashed., job Id: 1658.
[2012-11-14T07:37:11.297+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobObject:writeLongUTF Number of Break Index values=1
[2012-11-14T07:37:11.298+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobObject:writeLongUTF String= Engine rwEng-0 crashed., job Id: 1658 strlen=37
[2012-11-14T07:37:11.298+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobManager:notifyWaitingJobs Master job 1658 notify its duplicated jobs.
[2012-11-14T07:37:11.299+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobManager:updateJobStatus Finished updating job: 1658
[2012-11-14T07:37:11.299+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobManager:runJobInEngine Encounted exception in job 1658
[2012-11-14T07:37:11.299+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] ConnectionImpl:runJob jobid = 1658 Failed with exceptionoracle.reports.RWException: IDL:oracle/reports/RWException:1.0
[2012-11-14T07:37:11.318+01:00] [reports] [NOTIFICATION:16] [REP-56013] [oracle.reports.server] [tid: 12] [ecid: 0000Jf_MXxPFg4^kxS3j7k1GbGIR000003,0] ConnectionManager:release Connection 239 is released.
[2012-11-14T07:37:11.382+01:00] [reports] [NOTIFICATION:16] [REP-56020] [oracle.reports.server] [tid: 13] [ecid: 0000Jf_MXxSFg4^kxS3j7k1GbGIR000004,0] EngineManager:spawnEngine Launching engine rwEng-0.
[2012-11-14T07:37:11.382+01:00] [reports] [NOTIFICATION:16] [] [oracle.reports.server] [tid: 13] [ecid: 0000Jf_MXxSFg4^kxS3j7k1GbGIR000004,0] EngineManager:spawnEngine OS Name = Linux : OS Arch = amd64
[2012-11-14T07:37:11.383+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 13] [ecid: 0000Jf_MXxSFg4^kxS3j7k1GbGIR000004,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] EngineManager:spawnEngine Start engine command line = /utility/app/oracle/product/fmwfr/formsreports1/config/reports/bin/rwengine.sh -server -cp /utility/app/oracle/product/fmwfr/formsreports/reports/jlib/rwrun.jar -Dcomponent.path=rep_test -Doracle.reports.component=rwEng-0 -Dinprocess.server=false -Duser.language=it -Duser.region=IT -Xms512m -Xmx512m -Xss512k oracle.reports.engine.RWEngine name=rwEng-0 server=rep_test ORACLE_HOME=/utility/app/oracle/product/fmwfr/formsreports engineimplclass=oracle.reports.engine.EngineImpl cacheDir=/utility/app/oracle/product/fmwfr/formsreports1/reports/cache diagnosis="yes" keepConnection="yes" server_ior="/test/orafood/tmp/rep_test_129261664_1352875031383"
[2012-11-14T07:37:11.386+01:00] [reports] [NOTIFICATION:16] [REP-56021] [oracle.reports.server] [tid: 13] [ecid: 0000Jf_MXxSFg4^kxS3j7k1GbGIR000004,0] EngineManager:spawnEngine Engine rwEng-0 has been launched.
====================================================================================================================
Regards,
KVS
I can post the other logs if it helps.

Hi Rajesh,
If you just want to execute the report in web, you can do one thing.
Go to Query designer of your relevent system.
Open the Query which you want to execute in Web.
Then in the Query tab(first one) in the drop down list you have the Option 'execute'./ the 5th Icon in the Query designer screen.On clicking this it will open a new window( Internet Explorer) and prompts for your system credentials.
Upon providing them the query start executing if it deosn't have any selections, else selection screen appears.
You can save the link and can use this when ever you want to execute the query.Use it in the BW system environment's Intrenet explorer only.
Hope this helps.
Regards,
Ganesh Thota

How to populate Adobe LiveCycle Designer generated PDF Forms with data from Database in Windows app

Hi
I have a PDF template designed in Adobe LiveCycle Designer. This template has form fields which needs to be filled with data programmatically. I am using windows application in C#.Net 2005 in which I want to retrieve data from database and merge this data into PDF form in respective fields.
How this can be achieved?
I searched a lot & I found that we can process the XDP file generated from PDF to acheive this. I created the XDP file out of the PDF template created in designer. But I don't know how to merge data from database into that XDP file in respective fields and again convert this XDP file back to PDF programmatically. Can anybody help me ? This is urgent.
Thanks in advance.
Sambhaji

Please ignore the above code. The following one is correct one. using System; using System.Data; using System.Configuration; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Web.UI.HtmlControls; using System.Text; public partial class _Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { Response.ContentType = "application/vnd.adobe.xdp+xml"; StringBuilder responseString = new StringBuilder(); responseString.Append("<?xml version='1.0' encoding='UTF-8'?>"); responseString.Append("<?xfa generator='AdobeLiveCycleDesigner_V8.0' APIVersion='2.5.6290.0'?>"); responseString.Append("<xdp:xdp xmlns:xdp='http://ns.adobe.com/xdp/'>"); responseString.Append("<xfa:datasets xmlns:xfa='http://www.xfa.org/schema/xfa-data/1.0/'>"); responseString.Append("<xfa:data>"); responseString.Append("<form1>"); responseString.Append("<TextField1>Homer</TextField1>"); responseString.Append("<TextField2>Simpson</TextField2>"); responseString.Append("<field name ='DropDownList1'>"); responseString.Append("<items save='1'>"); responseString.Append("<text>1</text>"); responseString.Append("<text>2</text>"); responseString.Append("<text>3</text>"); responseString.Append("</items>"); responseString.Append("</field>"); responseString.Append("</form1>"); responseString.Append("</xfa:data>"); responseString.Append("</xfa:datasets>"); responseString.Append("<pdf href='C:\\Test.pdf' xmlns='http://ns.adobe.com/xdp/pdf/' />"); responseString.Append("</xdp:xdp>"); Response.Write(responseString); Response.Flush(); Response.End(); } }

Printing to a pdf error after migrating from Acrobat 7 to Acrobat X Professional

Printing to a pdf seems be broken in Acrobat X on my XP machine.
I have just upgraded from Acrobat 7 professional to Acrobat X professional.
With Acrobat 7, printing to a pdf file from within a program (MsWord, Visio etc) was a breeze. Now, with Acrobat X on the same machine, the print spooler always reports 'this document failed to print' even though the pdf is created correctly. I am then forced to cancel the pint job within the spooler itself.
Any help gratefully received.
Andrew Waterhouse

Sorry, but this is the Reader forum . The Acrobat Windows one is here:
http://forums.adobe.com/community/acrobat/acrobat_windows

Reports Migration from TFS 2008 to TFS 2013.

Hi There,
We wanted to migrating reports(integrated with TFS 2008) to new report server(integrated with TFS 2013) using RDL pull and push method using rs.exe tool. later planning to rebuild Tfs_Warehouse and Tfs_Analysis. Below are my queries:
If i migrate the reports using pull and push method will those report.rdl files still work with TFS2013 re-built data or
Should i upgrade the entire ReportServerDB? If so, does report.rdl files under go any changes during upgrade?
please guide me if my understanding is wrong and suggest me what should be taken care if i follow pull and push method.
Thanks in Advance.

Hi Manoj C N,
If you can migrate your report server database, it would be better to migrate the Reporting service databases to new report server since the data will not be changed.
About the existing reports, please elaborate more details and the result after taking the methods. But for moving reports, you can also download the existing reports and upload to the new report server. Refer to the link below for more information:
http://blogs.msdn.com/b/tfssetup/archive/2012/12/19/moving-rdl-files-from-one-reporting-services-instance-to-another.aspx
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to generate PDF using selcted row from datagrid in mxml flex4 web application

hi friends.
i am using flex4 web application with mxml tabs.
i am having one datagrid and one button outside the grid ,
i am having one datagrid in that i am having 5 records if i click a record from the datagrid then click that button means that particular record will save as PDF in my local PC.
How to do that,
Any suggession or examples.
Thanks in advance
B.venkatesan.

Thanks Vibhuti,
i got some idea abt PDF save bt please tell .i have some doubts in this code
var bytes:ByteArray = claimPDF.save(Method.LOCAL);
var f:FileReference = new FileReference();
f.save(bytes,"tourdeflex-pdf-sample.pdf");
what is claimpdf and Method? it show undefiened probery error
and f and bytes also show the same error.
what header files i have to import for file reference concepts;
i am using FLASH PLAYER 10;
tell what i will do
Thanks
B.venkatesan

Reports Migration from BOXI3 to BOXI4 but BOXI3 CMS not reachable

Hello everyone,
Currently, on my computer, I have BO XI 3 (deski+webi) and BO XI 4.1 installed.
I am working on converting reports from BO XI 3 to BO XI 4.1.
While using the conversion report tool in BO XI 3, some of my reports can not be converted from deski to webi due to errors.
I, then, try to import these "failed" reports from the BO XI 3 (deski) CMS deski but all folders are empty.
I have no error messages or anything.
When cliking on folders where the reports are supposed to be, I get a blank folder.
However, when trying to acess to CMS BO XI 3 webi, the reports which are already converted are visible.
The problem is only on BO XI 3 deski CMS.
Do not hesitate to tell me if you need additionnal information.
Can anyone help me on this subject please ?
Thank you,
Best regards,

Hi Audrey,
I believe you are not able to import DeskI documents in DeskI client. Please correct me if I am wrong.
Are you able to access the same in InfoView.
Regards,
Manpreet

SSRS 2012: Report Header PrintOnFirstPage-problem after report migration from SSRS 2008

Hi ,
I developed my report using VS 2008 IDE and the report header property "PrintOnFirstPage" is set to False.
The content of the header are some textboxes and lines that should show only on page number > 1.
This works fine in VS 2008 IDE in preview mode as well as with reports rendered by SSRS 2008 report server.
Recently I migrate&convert the same report to SSRS 2012 I noticed a different rendering behaviour of my report.
So in VS 2010 preview mode, the page headers content (textboxe etc.) is not visible on first page but the headers space did not colapse as it does in VS 2008 IDE preview mode.
I checked all the report properties but unable to find a solution to my problem.
I was able to reprduce the same behaviour by creating a new report using VS2010 IDE.
Any ideas are greatly appreciated
Thanks
Bodo

Hi BodoHH,
I have tested on my local enviorment and can't reproduce the issue, the issue can be caused by many factors, it can be caused by the properties setting and can also caused by the visual studio, Detais information below for your reference:
As you mentioned that you have check all the report properties, please also check the tablix,Page Header,report body properties to see if the size are the same with that in the SSRS2008.
Please open this rdl report in the report builder to see if the print layout is correct, if it works fine, the issue can be caused by the visual studio.
Please also try to upload the rdl report to report manager to check the layout.
Please also provide the snaphot of the layout in VS2010 to let us better analysis about the issue.
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

Crystal report migrate from BOXI2 to BOXI3.1 got an error

I want to make a migration of crystal report.
SOURCE: BOXIR2 CRYSTAL REPORT SP2
TARGET:BOXI3.1 SP2
I USED TWO METHODS,GOT THE SAME ERROR
1.USED PUBLISHING WIZARD
2.USED IMPORT WIZARD (BIAR FILE TO BOE3.1)
THE ERROR IS:
CAN'T READ DATA OF REPORT 'AA.RPT',RESEAON:CAN'T START "D:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ReportAdd"PROGRAM ADDING REPORT TO SYSTEM.
ANYBODY CAN HELP ME?THANKS IN ADVANTAGE.

Thanks again,Stratos
I find the reason.
I installed boe3.1 in path 'd:/businessobjects/'
insatalled dataservice in path 'd:/business object'
boe found the dataserivce's path 'd:/business objects/business objects enterprise12.0/win32_x86' to start reportapp.exe when I publishing crystal report.
BEST REGARDS

Generating PDF from report - migrating from 6i to 10g

Similar Messages

Maybe you are looking for