Generating smart form on a pre-printed paper

Hi, Can any one let me know how to develop a smart forms on a pre-pinted paper..? As i am facing lot of issues in layout alignment..

hi bhanu,
there is no difference on samrtfroms printing in pre-printed or normal paper .
just you have to set text in small windows according to pre-printed page.
regards

Similar Messages

  • How to get the PO no in the smart form and in the print program from ME23N

    hello all,
                     I am new to smart form printing.I want to make a smartform along with print program that will show PO Details.It has to be created as an o/p type in ME23N. I have created an o/p type ZPO using NACE ..Can some one tell me how to get the PO number in the smart form and in the print program  from ME23N ,so that I can then program the necessary calculations?plz help me with the code.Thanks in advance.
    Subhabrata.

    Hello Everyone,
    I am new to the forum and also to abap.
    Excuse me if it is a basic question.
    I am taking care of the output types.
    This is 1st time SAP will be implemented .
    For purchase order , I go to NACE ---EF----NEU---Processing routines
    print output---SAPFM06P---ENTRY_NEU----MEDRUCK
    FAX-----------SAPFM06P---ENTRY_NEU----MEDRUCK
    EDI------------RANASTED--EDI_PROCESSING
    DISTRIBUTION(ALE)---RANASTED---ALE_PROCESSING
    Are the above settings fine ?
    What are the standard programs for the PO outputs . I am looking for the smartforms and the driver program .
    I searched and found that IN ECC 6 , we have to install OSS notes .
    Gurus, please help  me . Let me know what all oss notes be implemented and how to proceed from here .
    Any help will be greatly appreciated ,
    Monalisa

  • Need  to show three diff sheets in a smart form , first to be printed twice

    Hi
    I need to show data in a smart form where I have 3 different sheets
    •     Process order request
    •     BoM
    •     Assembly
    where the first sheet will be printed twice .
    as header in each case we have order no , produced material order qty , qty produced etc with the title changing for each sheet . main window we have diff data depending on each form like it will b changing for process order req, bom , assembly .
    how to do that & I need to print each layout in 2 diff language.
    plz help.
    useful answers will be rewarded.
    Thanks

    Create three pages . The first and the last are static and the second variable.
    The first page repeat with a loop twice. The headers of the second pages and next has a window static (the header) and other variable .
    If you have two languages repeat the operation. Call the smartform with a parameter called language by example

  • Smart form for Excise Invoice Printing

    Hi experts,
    I am supposed to convert Standard sap script for excise invoice printing (Driver program name-J_1IEXCP) into smart form. I will be thankful if somebody will provide me standard smart form or oss no available for the same.
    Regards,
    Sanjay.

    Hi
    Welcome to SDN Community
    Have u converted the script to smartform ????
    If No Then follow this procedure
    In smartform Utilities --> Migrate SAP Script Name --> Give your scriptname and below give your Z smartform name and then migrate it
    Regards
    Pavan

  • Smart form settings for TO Print

    Hi,
    Anybody please provide the seetings to find what is the smart for used.
    Actually i tried to print TO using LT31. I need to know the customizing path, where the smart forms are configured.
    Regards,

    Hi,
    Please goto SPRO > Logistics Execution> Warehouse Management> Activities> Define Print control> Execute
    Click on the print code tab. You can find smart forms assigned to the Warehouse + Print code combination.
    Hope this is helpful.
    Regards,
    Baskar

  • Unable to print barcode in smart forms in zebra 420 printer.

    Hi,
    Can anyone please help me out with the following issue.
    1. I am unable to print the barcode using a zebra barcode printer from SAP. I use C128A format.
    2. But this issue doesn't come when I print the same form using a Laser printer. The scanner also detects the same correctly.
    3. The same barcode printer prints  my earlier forms with the same settings correctly.
    May I please know where the issue exactly is?
    Regards,
    Krishna

    Hi,
    Please check the size of the barcode in the styles and check ur printer settings.
    The paper layout of the printer also needs to be checked.
    Regards,
    Krishna

  • Smart form Driver Prog For Printing Invoice Lists

    Hi Sap Gurus,
    I am using the standard Sap drver prog RLB_invoice which is used for all invoices(ie Invoice,credit,debit,cancellation).Now,plz can anayone let me know the driver pgm used for printing invoice list smartform.
    will the RLB_INVOICE serve my purpose or is there any other Prog.
    Thanks in advance.
    Points will be rewarded for successfull answers

    Hi,
    For Invoice
    Form name = LB_BIL_INVOICE
    Driver Program = RLB_INVOICE
    Regards
    Edited by: K.P.N on Jan 9, 2008 2:53 PM

  • Smart form back page not printing

    Hi All,
    in a smrt form I am using two pages as first page and term page. for first page the next page is term page with no condition, but it is not getting printed.
    help please.
    T & R,
    AKS

    If both of ur pages are using main windows then it will not print.
    For this you can do one thing let ur first page hold a main window and here donot mention anything in page attributes next page.
    simply create a command. check goto next page : term page
    Now create a term page and create a secondary window which is of exact size as first window. and page attributes next page :be empty
    If you are asking for term page should be printed at the back of first page. then your first page o/p options select print mode to be D (double sided)

  • Pls Help! Adobe reader 9.0+ generated barcodes on pre-print is problem

    hi to all,
    I have a really strange problem and would like to share with you.
    Im generating the barcodes on the pre-print event, using LiveCycle Designer 8.0.
    Everything is ok when im trying to generate 2/3/4 barcodes in my form.
    The PROBLEM is if I decide to add more than 5 barcodes in my form and try to print it.
    Then - when I decide to print the form and to fill the information in my barcodes - the Acrobat Reader is just closed.
    No error alert..just closed. When i debugged the problem I saw that generating of barcodes is starting, but if there are more than 5 barcodes,
    the adobe reader closed before all barcodes to been generating.
    I do think about no enough memory, or something like that..but have no idea really what’s that.
    Do u have any idea what’s that problem..
    thanks in advance for yr time
    Regards

    Try and print the PDF as an image.
    Also when you send this to someone else are hey able to print without an issue?
    Have you've tried another printer?

  • Print Charts/Graphs on Smart Forms

    Hi Seniors,
    Here is a requirement on Smart Forms:
    I need to print Charts on Smart Forms. I have been through many answers on SDN but unfortunately, there are not many appropriate solutions. I executed some standard reports and got Charts and graphs as output but am not able to use it to display the same on Smart Forms. I have even  tried using classes for charts / graphs, business graphics(may be there would have been some sequential procedure for that).
    In the Smart Form, I have tried Form Attributes>Output Options>Output Format--> XSF output
    with output mode: 'Spool' and Output Device: 'XSFOUTDEV' from help.sap(I couldn't get what output device that was and was unable to execute).
    I have tried executing transaction GRAL(demo reports for SAP graphics) too.
    I found a report that would produce graph in Excel, I executed it, saved the graph from excel in '.bmp' format in SE78 and then printed it on Smart Form. But all I want is to have it done dynamically.
    I saw answers that we can save the graph chart/graph onto the desktop, upload it and then display it on the Smart Forms. But, when i tried it, I saw that it could be saved only in '.dat' format. I have to save it dynamically in a supported format like '.bmp' and print it on the Smart Forms(the graph would change depending upon the input values). Please help me resolve this.
    Thanks in Advance,
    Chaitanya.

    Dear Bouman,
    Thank you for the reply. I can write a report if would helps me to upload images dynamically. I saw your program but, here we cant give the name of the chart that comes as output. I tried to save the chart but it comes in '.dat' format but not in '.bmp' format. We may be having some classes or function modules that we need to call in a particular sequence. What other options do we have. Please help me resolve this.
    Regards,
    Chaitanya.C.N

  • Printing Chinese Characters in Smart Forms

    Hi,
    Iu2019m trying to print Chinese characters via smart forms. However during print preview or print, all Chinese characters are showing as # symbols.
    I have researched and implemented for some possible solutions posted in the forum like:
    a.) Setting the regional language control panel.
    b.) Activating the multi-byte function in I18N.
    c.) Checked the output device is SWINCF.
    d.) Control parameter language is ZH (Chinese).
    Unfortunately it still doesnu2019t solve the problem. Any input is highly appreciated.
    With regards,
    Marc

    Remark following basics:
    Forms:
    Language of the form must be: "ZH".
    Due to a SAPNOTE only font family CN* (CNSONG etc.) is mapped.
    For frontend print, you must install chinese true type on you local PC and print via "CNSAPWIN" .
    For backend print, you must install neccesaary fonts in your printer to the resident fonts. You must use a printer like "CNHPL4" or so.
    For PDF archiving, you must upload truetype fonts to application server -> basis guys.
    Cascading Fonts:
    If you mix different subfonts to unicode areas, you must use CNSAPWINCF.
    Until now, only frontend printing is available.
    Note:
    Spool created for back end print with print preview is only a simulation of getting a picture of the output created with front end technology. So it can differ, when the printer does not have the resident fonts.
    Regards,
    Christian

  • Smart Forms Logo Print

    Hi,
    There seems to be a problem with printing my Logos on Smart Forms. In the Print Preview it shows but when I print the same it does not show in the printout, but a dark band gets printed. Also I tried to see the same in SE78 The print preview comes but when I take a print out nothing gets printed but just a number gets printed. I think there has to be some printup setting which I havent looked up can anyone please tell me.
    Regards
    Yao Chhang

    hi yee,
    that''s not a problem with layout design or abap code,
    that's a problem with printer(some printers only can support for this functionality) or with printer setting.
    regards...
    seshu.

  • My smart form dont print

    hallow
    hi doing a smart form and in the print preview i see my page and its o.k. the problem is when i send the page to the printer noting is happen .
    when i send from my computer a word document its working what is the problem can be .
    i use a report program that call to smart function.
    thankes

    Hi antonio,
    do you have set the CONTROL_PARAMETERS?
    i do it like this:
    CLEAR: CONTROL_PARAMETERS.
    CONTROL_PARAMETERS-NO_DIALOG = 'X'.
    it works OK.
    Regards, Dieter

  • Help in printing smart form

    hallow
    i doing a smart form and i cant print it becuse when i send it to printer
    it stuck (proccing job) and my friend from other place can print the form
    in this printer .
    word or other thing i print normally .
    it happen in some computer in ower organization and this is a large problem
    i ask the basis and he said some thing about gui that different from my friend and mine but i don't now how to check it?
    maybe it different thing?
    how can i solve this problem?
    regards

    Shnya,
    NACE is a transaction code where in the functional consultants attach the script or smartform to a related driver program.Added to that they will set some other configurations like Prcessing routines and partner functions.Check whether they have assigned this to a output type and other stuff.Check with the Functional Guy.
    K.Kiran.

  • Printing data in box in a smart form

    Hi all ,
    I am working on the smart forms .
    I have printed the sold -to party and ship to party at the top.
    the prob is i have to print those data with in a box .
    how could i create a box???
    Pls let me know ...
    Regards
    Raj

    You can set the Box in the Outut Options tab in node Window.
    In the Box and Shading Frame, select the "Line with" checkbox. You can also view the Preview just next to it.
    Regards,
    Naimesh Patel

Maybe you are looking for