Generating subtotal in ALV...

Hi,
I am using Function modules to display my data in ALV. I also want to perform a subtotal on a field named dmbtr.
I am not sure what is wrong but when I try to execute my code I get the error, "Field Catalog not found". Is my logic wrong or call to the function "REUSE_ALV_GRID_DISPLAY".
I had this error previously and was suggested by one of the forum members to use the itab name in CAPITAL letters and it worked.
But now, I still get it. Find below my code. What could be the problem ?? Please help.
thanks
*& Report Z_MIGO_TXJCD_REPORT
REPORT Z_MIGO_TXJCD_REPORT.
TYPE-POOLS: slis.
TABLES: makt,mseg,zmigo_extend,ttxj,mkpf.
DATA: BEGIN OF migo_data OCCURS 0,
 txjcd LIKE zmigo_extend-txjcd,
 matnr LIKE mseg-matnr,
 werks LIKE mseg-werks,
 lgort LIKE mseg-lgort,
 bwart LIKE mseg-bwart,
 menge LIKE mseg-menge,
 dmbtr LIKE mseg-dmbtr,
 budat LIKE mkpf-budat,
 END OF migo_data.
DATA migo_data_alv LIKE migo_data occurs 0 with header line.
DATA: it_cat TYPE slis_t_fieldcat_alv,
 wa_lay TYPE slis_layout_alv.
FIELD-SYMBOLS: <fs_cat> LIKE LINE OF it_cat.
SELECT-OPTIONS: so_matnr FOR makt-matnr,
 so_budat FOR mkpf-budat,
 so_werks FOR mseg-werks,
 so_lgort FOR mseg-lgort,
 so_bwart FOR mseg-bwart,
 so_txjcd FOR ttxj-txjcd.
START-OF-SELECTION.
SELECT ctxjcd amatnr awerks algort a~bwart
 amenge admbtr b~budat INTO TABLE
 migo_data
 FROM mseg AS a INNER JOIN mkpf AS b ON amblnr = bmblnr INNER JOIN
 zmigo_extend AS c ON amblnr = cmblnr
 WHERE a~matnr IN so_matnr
 AND b~budat IN so_budat
 AND a~werks IN so_werks
 AND a~lgort IN so_lgort
 AND a~bwart IN so_bwart
 AND c~txjcd IN so_txjcd
 ORDER BY c~txjcd.
loop at migo_data.
 move-corresponding migo_data to migo_data_alv.
 at end of txjcd.
 sum.
 append migo_data_alv.
 migo_data_alv-dmbtr = migo_data-dmbtr.
 endat.
 at last.
 sum.
 append migo_data_alv.
 migo_data_alv-dmbtr = migo_data-dmbtr.
 endat.
endloop.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
 EXPORTING
 i_program_name = sy-cprog
 i_internal_tabname = 'migo_data_alv'
 i_inclname = sy-cprog
 CHANGING
 ct_fieldcat = it_cat
 EXCEPTIONS
 inconsistent_interface = 1
 program_error = 2
 OTHERS = 3.
LOOP AT it_cat ASSIGNING <fs_cat>.
 CLEAR <fs_cat>-key.
ENDLOOP.
wa_lay-zebra = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_grid_title = 'MIGO report with Tax Jurisdiction Code'
 is_layout = wa_lay
 it_fieldcat = it_cat
 TABLES
 t_outtab = MIGO_DATA_ALV
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.

Try building your field catalog like this.
* call function 'REUSE_ALV_FIELDCATALOG_MERGE'
* exporting
* i_program_name = sy-cprog
* i_internal_tabname = 'MIGO_DATA_ALV'
* i_inclname = sy-cprog
* changing
* ct_fieldcat = it_cat
* exceptions
* inconsistent_interface = 1
* program_error = 2
* others = 3.
wa_lay-zebra = 'X'.

data: tmp_fc type slis_fieldcat_alv .
tmp_fc-reptext_ddic = 'Material Number'.
tmp_fc-fieldname = 'MATNR'.
tmp_fc-tabname = 'MIGO_DATA_ALV'.
tmp_fc-outputlen = 18.
tmp_fc-do_sum = space.
append tmp_fc to it_cat.
tmp_fc-reptext_ddic = 'Plant'.
tmp_fc-fieldname = 'WERKS'.
tmp_fc-tabname = 'MIGO_DATA_ALV'.
tmp_fc-outputlen = 4.
tmp_fc-do_sum = space.
append tmp_fc to it_cat.
tmp_fc-reptext_ddic = 'Dmbtr'.
tmp_fc-fieldname = 'DMBTR'.
tmp_fc-tabname = 'MIGO_DATA_ALV'.
tmp_fc-outputlen = 15.
tmp_fc-do_sum = 'X'.
append tmp_fc to it_cat.
loop at it_cat assigning <fs_cat>.
 clear <fs_cat>-key.
endloop.
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_grid_title = 'MIGO report with Tax Jurisdiction Code'
 is_layout = wa_lay
 it_fieldcat = it_cat
 tables
 t_outtab = migo_data_alv
 exceptions
 program_error = 1
 others = 2.
Regards,
Rich Heilman

Similar Messages

Color on subtotal in alv

Is there any possibility to display color on subtotals as it generated dynamically in alv.
FM used : reuse_alv_grid_display..
1. i am calculating the threshold quantity of shipped quantities for 12 months
and populating it for customer material combination.
2. for every customer material combination it displays the threshold quantity
3. I am populating the shipped quantity by month wise for that customer and material combination
4. Requirement is to check the shipped quantity and threshold quantity for the
customer material combination , if the monthly shipped quantity is greater than
threshold quantity then color is to be displayed on that subtotals as the end user
identify easily.
Can u Please reply logic to check this .
Thanks in advance.
Rao

Hai,
See the below program for ALV color:
TYPE-POOLS: SLIS.
PARAMETERS:
P_ROW TYPE I,
P_COLUMN TYPE I.
DATA:
FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT_LN LIKE LINE OF FIELDCAT,
SORTCAT TYPE SLIS_T_SORTINFO_ALV,
SORTCAT_LN LIKE LINE OF SORTCAT,
EVENTCAT TYPE SLIS_T_EVENT,
EVENTCAT_LN LIKE LINE OF EVENTCAT.
DATA:
COL_POS TYPE I.
******Declare Data Areas for List Viewer (End)**************
******Declare Internal Table to Store Selected Data (Begin)*
DATA:
BEGIN OF ISPFLI OCCURS 0,
 CHECK TYPE SLIS_FIELDNAME,
 R_COLOR(3) TYPE C,
 CELL TYPE SLIS_T_SPECIALCOL_ALV,
 CARRID LIKE SPFLI-CARRID,
 CONNID LIKE SPFLI-CONNID,
 COUNTRYFR LIKE SPFLI-COUNTRYFR,
END OF ISPFLI.
DATA:
WA LIKE LINE OF ISPFLI,
W_LINES TYPE I.
DATA:
FS_CELL LIKE LINE OF ISPFLI-CELL.
DATA:
LAYOUT1 TYPE SLIS_LAYOUT_ALV.
******Declare Internal Table to Store Selected Data (End)***
*******Select Data into Internal Table (Begin) ***************
SELECT CARRID CONNID COUNTRYFR
 INTO CORRESPONDING FIELDS OF TABLE ISPFLI
 FROM SPFLI.
DESCRIBE TABLE ISPFLI LINES W_LINES.
IF P_ROW IS INITIAL AND
P_COLUMN IS INITIAL .
MESSAGE 'Enter atlest one number' TYPE 'I'.
STOP.
ELSEIF P_ROW GT W_LINES.
MESSAGE 'Row with the row number is not there' TYPE 'I'.
STOP.
ENDIF.
IF P_COLUMN IS NOT INITIAL AND
 P_COLUMN GT 3.
 MESSAGE 'Field with the column number is not there' TYPE 'I'.
 STOP.
ENDIF.
Select Data into Internal Table (End) ****************
Build Field Catalogs (Begin)**************************
IF P_ROW IS NOT INITIAL AND P_COLUMN IS INITIAL.
PERFORM BUILD_FIELDCAT.
PERFORM BUILD_FIELDCAT2.
PERFORM BUILD_FIELDCAT4.
PERFORM BUILD_LAYOUT1.
PERFORM ROW_COLOR.
ELSEIF P_COLUMN IS NOT INITIAL
AND P_ROW IS NOT INITIAL.
PERFORM BUILD_FIELDCAT.
PERFORM BUILD_FIELDCAT2.
PERFORM BUILD_FIELDCAT4.
PERFORM BUILD_LAYOUT1.
PERFORM CELL_COLOR.
ELSE.
PERFORM BUILD_FIELDCAT.
PERFORM BUILD_FIELDCAT2.
PERFORM BUILD_FIELDCAT3.
PERFORM BUILD_LAYOUT1.
ENDIF.
PERFORM ROW_COLOR.
PERFORM CELL_COLOR.
PERFORM BUILD_FIELDCAT.
PERFORM BUILD_FIELDCAT2.
PERFORM BUILD_FIELDCAT3.
PERFORM BUILD_LAYOUT1.
PERFORM ROW_COLOR.
PERFORM CELL_COLOR.
PERFORM ROW_COLOR.
PERFORM CELL_COLOR.
PERFORM BUILD_SORTCAT.
PERFORM BUILD_SORTCAT2.
******Build Field Catalogs (End)*****************************
******Build Event Catalog (Begin)****************************
PERFORM BUILD_EVENTCAT.
******Build Event Catalog (End)******************************
******Start List Viewer (Begin)******************************
PERFORM START_LIST_VIEWER.
******Start List Viewer (End)********************************
********FORM ROUTINES (Begin)********************************
FORM ROW_COLOR.
CLEAR WA.
READ TABLE ISPFLI INDEX P_ROW INTO WA.
WA-R_COLOR = 'C61'.
MODIFY ISPFLI FROM WA INDEX P_ROW.
CLEAR WA.
ENDFORM.
FORM CELL_COLOR.
CLEAR WA.
CLEAR FS_CELL.
FS_CELL-FIELDNAME = 'CONNID'.
FS_CELL-COLOR-COL = P_COLUMN."4.
FS_CELL-COLOR-INT = 0.
FS_CELL-COLOR-INV = 1.
READ TABLE ISPFLI INDEX P_ROW INTO WA.
APPEND FS_CELL TO WA-CELL.
MODIFY ISPFLI FROM WA INDEX P_ROW TRANSPORTING CELL.
CLEAR WA.
CLEAR FS_CELL.
ENDFORM.
 Color table-FIELDNAME = field name of the cell to be colored
 Color table-COLOR-COL = color number (1 - 9)
 Color table-COLOR-INT = bold (0 = off, 1 = on)
 Color table-COLOR-INV = inverse (0 = off, 1 = on)
 Color table-NOKEYCOL = ignore key coloring ('X' = yes, ' ' = no)
FORM BUILD_FIELDCAT.
CLEAR FIELDCAT_LN.
ADD 1 TO COL_POS.
FIELDCAT_LN-REF_TABNAME = 'SPFLI'.
FIELDCAT_LN-FIELDNAME = 'CARRID'.
FIELDCAT_LN-REF_FIELDNAME = SPACE.
FIELDCAT_LN-OUTPUTLEN = 20.
FIELDCAT_LN-KEY = 'X'.
FIELDCAT_LN-NO_OUT = 'X'."SPACE.
FIELDCAT_LN-DO_SUM = SPACE.
FIELDCAT_LN-COL_POS = 2.
FIELDCAT_LN-NO_OUT = SPACE.
FIELDCAT_LN-QFIELDNAME = SPACE.
FIELDCAT_LN-HOTSPOT = 'X'.
APPEND FIELDCAT_LN TO FIELDCAT.
ENDFORM. "BUILD_FIELDCAT
*& Form BUILD_FIELDCAT2
 text
FORM BUILD_FIELDCAT2.
CLEAR FIELDCAT_LN.
ADD 1 TO COL_POS.
FIELDCAT_LN-REF_TABNAME = 'SPFLI'.
FIELDCAT_LN-FIELDNAME = 'CONNID'.
FIELDCAT_LN-REF_FIELDNAME = SPACE.
FIELDCAT_LN-OUTPUTLEN = 20.
FIELDCAT_LN-KEY = 'X'.
FIELDCAT_LN-DO_SUM = SPACE.
FIELDCAT_LN-COL_POS = 1.
FIELDCAT_LN-NO_OUT = SPACE .
FIELDCAT_LN-QFIELDNAME = SPACE.
FIELDCAT_LN-HOTSPOT = SPACE.
APPEND FIELDCAT_LN TO FIELDCAT.
ENDFORM. "BUILD_FIELDCAT2
*& Form BUILD_FIELDCAT3
 text
FORM BUILD_FIELDCAT3.
CLEAR FIELDCAT_LN.
ADD 1 TO COL_POS.
FIELDCAT_LN-REF_TABNAME = 'SPFLI'.
FIELDCAT_LN-FIELDNAME = 'COUNTRYFR'.
FIELDCAT_LN-REF_FIELDNAME = SPACE.
FIELDCAT_LN-OUTPUTLEN = 20.
FIELDCAT_LN-EMPHASIZE = 'C310'.
FIELDCAT_LN-EMPHASIZE = 'X'.
FIELDCAT_LN-EMPHASIZE = SPACE.
FIELDCAT_LN-KEY = SPACE.
FIELDCAT_LN-DO_SUM = 'X'.
FIELDCAT_LN-COL_POS = 3.
FIELDCAT_LN-NO_OUT = SPACE.
FIELDCAT_LN-QFIELDNAME = SPACE.
FIELDCAT_LN-HOTSPOT = SPACE.
APPEND FIELDCAT_LN TO FIELDCAT.
ENDFORM. "BUILD_FIELDCAT3
FORM BUILD_FIELDCAT4.
CLEAR FIELDCAT_LN.
ADD 1 TO COL_POS.
FIELDCAT_LN-REF_TABNAME = 'SPFLI'.
FIELDCAT_LN-FIELDNAME = 'COUNTRYFR'.
FIELDCAT_LN-REF_FIELDNAME = SPACE.
FIELDCAT_LN-OUTPUTLEN = 20.
FIELDCAT_LN-EMPHASIZE = 'C310'.
FIELDCAT_LN-EMPHASIZE = 'X'.
FIELDCAT_LN-EMPHASIZE = SPACE.
FIELDCAT_LN-KEY = SPACE.
FIELDCAT_LN-DO_SUM = 'X'.
FIELDCAT_LN-COL_POS = 3.
FIELDCAT_LN-NO_OUT = SPACE.
FIELDCAT_LN-QFIELDNAME = SPACE.
FIELDCAT_LN-HOTSPOT = SPACE.
APPEND FIELDCAT_LN TO FIELDCAT.
ENDFORM. "BUILD_FIELDCAT3
*& Form BUILD_SORTCAT
 text
FORM BUILD_SORTCAT.
CLEAR SORTCAT_LN.
SORTCAT_LN-SPOS = '1'.
SORTCAT_LN-FIELDNAME = 'CONNID'.
SORTCAT_LN-UP = 'X'..
SORTCAT_LN-DOWN = SPACE.
SORTCAT_LN-SUBTOT = 'X'.
APPEND SORTCAT_LN TO SORTCAT.
ENDFORM. "BUILD_SORTCAT
*& Form BUILD_SORTCAT2
 text
FORM BUILD_SORTCAT2.
CLEAR SORTCAT_LN.
SORTCAT_LN-SPOS = '2'.
SORTCAT_LN-FIELDNAME = 'CARRID'.
SORTCAT_LN-UP = SPACE.
SORTCAT_LN-DOWN = 'X'.
SORTCAT_LN-SUBTOT = SPACE.
APPEND SORTCAT_LN TO SORTCAT.
ENDFORM. " BUILD_SORTCAT2
FORM BUILD_LAYOUT1.
LAYOUT1-BOX_FIELDNAME = 'CHECK'.
LAYOUT1-INFO_FIELDNAME = 'R_COLOR'.
LAYOUT1-COLTAB_FIELDNAME = 'CELL'.
ENDFORM. " BUILD_LAYOUT1
*& Form BUILD_EVENTCAT
 text
FORM BUILD_EVENTCAT.
EVENTCAT_LN-NAME = 'TOP_OF_PAGE'.
EVENTCAT_LN-FORM = 'PAGE_HEADER'.
APPEND EVENTCAT_LN TO EVENTCAT.
ENDFORM. "BUILD_EVENTCAT
*& Form START_LIST_VIEWER
 text
FORM START_LIST_VIEWER.
DATA: PGM LIKE SY-REPID.
PGM = SY-REPID.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 I_INTERFACE_CHECK = ' '
 I_CALLBACK_PROGRAM = PGM
 i_callback_pf_status_set = ' '
 I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
 I_STRUCTURE_NAME =
 IS_LAYOUT = LAYOUT1
 IT_FIELDCAT = FIELDCAT
 IT_EXCLUDING =
 IT_SPECIAL_GROUPS =
 IT_SORT = SORTCAT
 IT_FILTER =
 IS_SEL_HIDE =
 I_DEFAULT = 'X'
 I_SAVE = 'A'
 IS_VARIANT = ' '
 IT_EVENTS =
 IT_EVENT_EXIT =
 IS_PRINT =
 I_SCREEN_START_COLUMN = 0
 I_SCREEN_START_LINE = 0
 I_SCREEN_END_COLUMN = 0
 I_SCREEN_END_LINE = 0
 IMPORTING
 E_EXIT_CAUSED_BY_CALLER =
 es_exit_caused_by_user =
 TABLES
 T_OUTTAB = ISPFLI
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
ENDFORM. "START_LIST_VIEWER
Hope you got it.
Reward points if it helps you.
Regds,
Rama chary.Pammi

SUBTOTAL IN ALV REPORT

hello freinds,
I am facing problem of subtotal in alv report.
I am explaining my problem.....................
In my report there are 8 columns...
in first colum there is 'Acount Number' field. I have to sort out it.and I have done it succesfully. Now in my seventh and eighth column there are fields 'PAYMENT GROSS AMOUNT' and ' IVA AMOUNT' respectively.
Now I have to do subtotal of these two columns (7th & 8th) according to first column value i.e Acount Number.
Please send me solution.
Thanks in Advance........

Hi,
try this code ,hope usefull to u, please reward point if usefull to u.
*& Report ZALV_SUBTOTAL
This program lists orders (VBAK) with sort and sub-total for *
'sold-to-party' (KUNNR) and 'Sales organization' (VKORG) *
REPORT ZALV_SUBTOTAL.
TABLES : vbak.
TYPE-POOLS: slis. " ALV Global types
SELECT-OPTIONS :
s_vkorg FOR vbak-vkorg, " Sales organization
s_kunnr FOR vbak-kunnr, " Sold-to party
s_vbeln FOR vbak-vbeln. " Sales document
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.
PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
DATA:
BEGIN OF gt_vbak OCCURS 0,
 vkorg LIKE vbak-vkorg, " Sales organization
 kunnr LIKE vbak-kunnr, " Sold-to party
 vbeln LIKE vbak-vbeln, " Sales document
 netwr LIKE vbak-netwr, " Net Value of the Sales Order
 waerk LIKE vbak-waerk, " Document currency
END OF gt_vbak.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
PERFORM f_read_data.
PERFORM f_display_data.
 Form f_read_data
FORM f_read_data.
SELECT * INTO CORRESPONDING FIELDS OF TABLE gt_vbak
 FROM vbak
 UP TO p_max ROWS
 WHERE kunnr IN s_kunnr
 AND vbeln IN s_vbeln
 AND vkorg IN s_vkorg.
ENDFORM. " F_READ_DATA
 Form f_display_data
FORM f_display_data.
DEFINE m_fieldcat.
 add 1 to ls_fieldcat-col_pos.
 ls_fieldcat-fieldname = &1.
 ls_fieldcat-ref_tabname = 'VBAK'.
 ls_fieldcat-do_sum = &2.
 ls_fieldcat-cfieldname = &3.
 append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
 add 1 to ls_sort-spos.
 ls_sort-fieldname = &1.
 ls_sort-up = 'X'.
 ls_sort-subtot = &2.
 append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
 ls_fieldcat TYPE slis_fieldcat_alv,
 lt_fieldcat TYPE slis_t_fieldcat_alv,
 lt_sort TYPE slis_t_sortinfo_alv,
 ls_sort TYPE slis_sortinfo_alv,
 ls_layout TYPE slis_layout_alv.
m_fieldcat 'VKORG' '' ''.
m_fieldcat 'KUNNR' '' ''.
m_fieldcat 'VBELN' '' ''.
m_fieldcat 'NETWR' 'X' 'WAERK'.
m_fieldcat 'WAERK' '' ''.
m_sort 'VKORG' 'X'. " Sort by vkorg and subtotal
m_sort 'KUNNR' 'X'. " Sort by kunnr and subtotal
m_sort 'VBELN' ''. " Sort by vbeln
ls_layout-cell_merge = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 is_layout = ls_layout
 it_fieldcat = lt_fieldcat
 it_sort = lt_sort
 TABLES
 t_outtab = gt_vbak.
ENDFORM. " F_DISPLAY_DATA
END OF PROGRAM Z_DEMO_ALV_SORT **********************
Regards
fareedas

How to find out the total, subtotal in alv report

hi dears,
how to find out the total, subtotal in alv report?
pls tell me logic ,
i will be waiting for eply
regards
eswar

Hi,
ALV Grid List with sub-totals
REPORT z_demo_alv_sort.
* This program lists orders (VBAK) with sort and sub-total for *
* 'sold-to-party' (KUNNR) and 'Sales organization' (VKORG) *
TABLES : vbak.
TYPE-POOLS: slis. " ALV Global types
SELECT-OPTIONS :
s_vkorg FOR vbak-vkorg, " Sales organization
s_kunnr FOR vbak-kunnr, " Sold-to party
s_vbeln FOR vbak-vbeln. " Sales document
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.
PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
DATA:
BEGIN OF gt_vbak OCCURS 0,
 vkorg LIKE vbak-vkorg, " Sales organization
 kunnr LIKE vbak-kunnr, " Sold-to party
 vbeln LIKE vbak-vbeln, " Sales document
 netwr LIKE vbak-netwr, " Net Value of the Sales Order
 waerk LIKE vbak-waerk, " Document currency
END OF gt_vbak.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
PERFORM f_read_data.
PERFORM f_display_data.
* Form f_read_data
FORM f_read_data.
SELECT * INTO CORRESPONDING FIELDS OF TABLE gt_vbak
 FROM vbak
 UP TO p_max ROWS
 WHERE kunnr IN s_kunnr
 AND vbeln IN s_vbeln
 AND vkorg IN s_vkorg.
ENDFORM. " F_READ_DATA
* Form f_display_data
FORM f_display_data.
DEFINE m_fieldcat.
 add 1 to ls_fieldcat-col_pos.
 ls_fieldcat-fieldname = &1.
 ls_fieldcat-ref_tabname = 'VBAK'.
 ls_fieldcat-do_sum = &2.
 ls_fieldcat-cfieldname = &3.
 append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
 add 1 to ls_sort-spos.
 ls_sort-fieldname = &1.
 ls_sort-up = 'X'.
 ls_sort-subtot = &2.
 append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
 ls_fieldcat TYPE slis_fieldcat_alv,
 lt_fieldcat TYPE slis_t_fieldcat_alv,
 lt_sort TYPE slis_t_sortinfo_alv,
 ls_sort TYPE slis_sortinfo_alv,
 ls_layout TYPE slis_layout_alv.
m_fieldcat 'VKORG' '' ''.
m_fieldcat 'KUNNR' '' ''.
m_fieldcat 'VBELN' '' ''.
m_fieldcat 'NETWR' 'X' 'WAERK'.
m_fieldcat 'WAERK' '' ''.
m_sort 'VKORG' 'X'. " Sort by vkorg and subtotal
m_sort 'KUNNR' 'X'. " Sort by kunnr and subtotal
m_sort 'VBELN' ''. " Sort by vbeln
ls_layout-cell_merge = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 is_layout = ls_layout
 it_fieldcat = lt_fieldcat
 it_sort = lt_sort
 TABLES
 t_outtab = gt_vbak.
ENDFORM. " F_DISPLAY_DATA
***************** END OF PROGRAM Z_DEMO_ALV_SORT **********************
Regards
Sudheer

ALV Total and Subtotal in ALV

Hi,
I want to display the Total and Subtotal in Alv in Webdynpro Abap, and i am getting this Error( Access via 'NULL' object reference not possible) and also i have checked the Cardinality also. Please get me a Good Solution.

I think your node( the node which is binded to data node of alv interface controller ) having collection cardinality of 1:1, if yes, then change it to 0:N,
i hope this will solve the issue.
If you still get the error, go to st22, open your error, go down that page (keep pressing pagedown button ), then you will find your code and there find this arrow >>>>> then let me know that code line.
Regards
Srinivas

Problem in Subtotal in ALV

Hi Experts,
I wanted to do the subtotal in ALV report. For subtotal which data type we need to take. Is it really affect with data type??
My problem is: I wanted to do the subtotal based on Purchase order number. I need to do the subtotal of field LV_VAR based on purchase order number. The field LV_VAR having TYPE packed decimal.
Do I need to change the data type of field LV_VAR for getting subtotal?
For implementing the Subtotal functionality in my alv report, I did following changes
1. Declared one sort catalog as
gs_sort-fieldname = 'EBELN'.
gs_sort-up = 'X'.
gs-sort-subtot = 'X'.
append gs_sort to gt_sort.
2. In fieldcatalog of field LV_VAR
i_fieldcatalog-fieldname = 'LV_VAR'.
i_fieldcatalog-tabname = 'ITAB'.
i_fieldcatalog-do_sum = 'X'.
append i_fieldcatalog.
Then in FM REUSE_ALV_GRID_DISPLAY, I had passed sort catalog as
it_sort = gt_sort[]
But I did not get the subtotal functionality.
Any suggestion pls?

Hi ,
I will give you one sample code which has a functionality of subtotal and grand total also .
And this code will help you in many aspects also.
*& Report ZSAND_SUBTOTAL *
REPORT ZSAND_SUBTOTAL LINE-COUNT 65 .
*& Report ZALV_LIST
TABLES : mseg.
TYPE-POOLS : slis.
DATA : BEGIN OF itab OCCURS 0,
 mblnr LIKE mseg-mblnr,
 matnr LIKE mseg-matnr,
 werks LIKE mseg-werks,
 menge LIKE mseg-menge,
 line_color(4) TYPE c,
 END OF itab.
DATA : BEGIN OF itab1 OCCURS 0,
 mblnr LIKE mseg-mblnr,
 matnr LIKE mseg-matnr,
 werks LIKE mseg-werks,
 menge LIKE mseg-menge,
 line_color(4) TYPE c,
 END OF itab1.
data: it_sortcat type slis_sortinfo_alv occurs 1,
 wa_sort like line of it_sortcat.
DATA: it_header TYPE slis_t_listheader,
 wa_header TYPE slis_listheader.
data: var1(1).
DATA var2.
data:mytabix like sy-tabix.
data:wtab1 like line of itab,
 wtab2 like line of itab.
DATA : t_fcat TYPE slis_t_fieldcat_alv,
t_eve TYPE slis_t_event,
t_subtot TYPE slis_t_sortinfo_alv,
subtot LIKE LINE OF t_subtot,
wa_fcat LIKE LINE OF t_fcat,
gd_layout TYPE slis_layout_alv.
DATA : gt_menge LIKE mseg-menge,
st_menge LIKE mseg-menge.
data:it_extab type SLIS_t_EXTAB,
 wa_extab like line of it_extab.
SELECTION-SCREEN : BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : doc FOR mseg-mblnr.
SELECTION-SCREEN : END OF BLOCK blk1.
START-OF-SELECTION.
PERFORM build_cat USING t_fcat.
PERFORM build_layout.
PERFORM build_eve.
perform fill_sort.
PERFORM get_data.
PERFORM display.
*& Form build_cat
*text
*-->TEMP_FCAT text
FORM build_cat USING temp_fcat TYPE slis_t_fieldcat_alv.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MBLNR'.
wa_fcat-seltext_m = 'Material Doc.'.
APPEND wa_fcat TO temp_fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-seltext_m = 'Material'.
APPEND wa_fcat TO temp_fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'WERKS'.
wa_fcat-seltext_m = 'Plant'.
APPEND wa_fcat TO temp_fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MENGE'.
wa_fcat-seltext_m = 'Quantity'.
wa_fcat-do_sum = 'Y'.
APPEND wa_fcat TO temp_fcat.
CLEAR wa_fcat.
ENDFORM. "build_cat
*& Form build_eve
*text
FORM build_eve.
DATA : wa_eve TYPE slis_alv_event.
data:mytabix type sy-tabix.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = t_eve
EXCEPTIONS
list_type_wrong = 1
OTHERS = 2.
IF sy-subrc <> 0.
*MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE t_eve into wa_eve WITH KEY name = slis_ev_top_of_page.
*INTO wa_eve.
IF sy-subrc = 0.
mytabix = sy-tabix.
MOVE 'TOP_OF_PAGE' TO wa_eve-form.
append wa_eve to t_eve.
*modify t_eve from wa_eve index mytabix transporting form.
ENDIF.
READ TABLE t_eve into wa_eve WITH KEY name = slis_ev_end_of_page.
*INTO wa_eve.
IF sy-subrc = 0.
mytabix = sy-tabix.
MOVE 'END_OF_PAGE' TO wa_eve-form.
append wa_eve to t_eve.
*modify t_eve from wa_eve index mytabix transporting form.
ENDIF.
ENDFORM. "build_eve
*& Form build_layout
*text
FORM build_layout.
*gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-info_fieldname = 'LINE_COLOR'.
gd_layout-subtotals_text = 'SUBTOTAL'.
*gd_layout-totals_text = 'TOTAL'.
gd_layout-EDIT = 'X'.
ENDFORM. " BUILD_LAYOUT
*& Form get_data
*text
FORM get_data.
SELECT mblnr matnr werks menge FROM mseg INTO CORRESPONDING FIELDS OF
TABLE itab
WHERE mblnr IN doc.
SORT itab BY mblnr.
sort itab by mblnr matnr.
read table itab into wtab1 index 1.
mytabix = 1.
loop at itab into wtab2 from 2.
if wtab1-mblnr = wtab2-mblnr and wtab1-matnr = wtab2-matnr.
wtab1-menge = wtab1-menge + wtab2-menge.
modify itab from wtab1 index mytabix.
else.
modify itab from wtab1 index mytabix.
clear wtab1.
mytabix = sy-tabix.
move wtab2 to wtab1.
endif.
clear wtab2.
endloop.
delete ADJACENT DUPLICATES from itab comparing mblnr matnr.
ENDFORM. "get_data
*& Form display
*text
FORM display.
wa_extab-fcode = '&ETA'.
append wa_extab to it_extab.
wa_header-typ = 'H'.
 wa_header-info = 'SANDY is Great'.
 append wa_header to it_header.
 clear wa_header.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
 I_CALLBACK_PROGRAM = 'ZSAND_SUBTOTAL'
I_CALLBACK_PF_STATUS_SET = ' '
 I_CALLBACK_USER_COMMAND = 'USERCOMMAND'
 I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
 IS_LAYOUT = gd_layout
 IT_FIELDCAT = t_fcat
 IT_EXCLUDING = it_extab
IT_SPECIAL_GROUPS =
 IT_SORT = it_sortcat
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
 IT_EVENTS = t_eve[]
IT_EVENT_EXIT = 'BUILD_EVE'
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
 t_outtab = itab
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display
***& Form top_of_page
*text
FORM top_of_page.
if var1 is initial.
wa_header-typ = 'H'.
 wa_header-info = 'SANDY is Great'.
 append wa_header to it_header.
 clear wa_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
 IT_LIST_COMMENTARY = it_header
 I_LOGO = 'HR_LOGO'
I_END_OF_LIST_GRID =
 var1 = 'X'.
endif.
ENDFORM. "top_of_page
FORM end_of_page.
if var2 is initial.
wa_header-typ = 'H'.
 wa_header-info = 'SANDY is Great'.
 append wa_header to it_header.
 clear wa_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
 IT_LIST_COMMENTARY = it_header
 I_LOGO = 'HR_LOGO'
I_END_OF_LIST_GRID =
 var2 = 'X'.
endif.
ENDFORM. "top_of_page
*& Form fill_sort
 text
--> p1 text
<-- p2 text
form fill_sort .
wa_sort-spos = 1.
wa_sort-fieldname = 'MBLNR'.
wa_sort-SUBTOT = 'X'. "subtotals any totals column by this field
gd_sortcat-tabname
APPEND wa_sort TO it_sortcat.
wa_sort-spos = 2.
wa_sort-fieldname = 'MATNR'.
gd_sortcat-tabname
APPEND wa_sort TO it_sortcat.
endform. " fill_sort
FORM status USING rt_extab TYPE slis_t_extab.
set pf-status 'ZSTANDARD'.
endform.
form USERCOMMAND USING R_UCOMM type sy-ucomm
 rselfield type slis_selfield .
set parameter id 'MAT' field rselfield-value .
call transaction 'MM03' and skip first screen.
endform.
I hope this program will help you out.
Help children of U.N World Food Program by rewarding points and encourage others to answer your queries.

Adding row after subtotal in ALV

Hi Guys,
can we add one row after the subtotal in ALV.
Like the below...
field1 field2 field3 field4
Sub total. 120 121 125 130
Test 150
can you help me about the above...
Thanks,
Lingesh

Hi
If you use GROUPLEVEL_CHANGE you have to creare a form like this:
FORM GROUPLEVEL_CHANGE
 USING P_LINEINFO TYPE SLIS_LINEINFO
 LS_GROUPS TYPE KKBLO_GROUPLEVELS.
ENDFORM. "GROUPLEVEL_CHANGE
In the P_LINEINFO you have details of row and in the LS_GROUPS details of level of sorting.
For example I used it to re-write subtotal:
FORM GROUPLEVEL_CHANGE USING P_LINEINFO TYPE SLIS_LINEINFO
 LS_GROUPS TYPE KKBLO_GROUPLEVELS.
PERFORM WRITE_SUB_TOTAL USING LS_GROUPS.
ENDFORM. "GROUPLEVEL_CHANGE
FORM WRITE_SUB_TOTAL USING P_GROUPS TYPE KKBLO_GROUPLEVELS.
DATA: TOT_SALDO_A LIKE BSID-DMBTR,
 TOT_FATTURATO_A LIKE BSID-DMBTR,
 TOT_DSO_A LIKE BSID-DMBTR.
DATA: WA_GROUP TYPE KKBLO_GROUPLEVELS.
DATA: RUN_LEVEL TYPE I.
DATA: BEGIN OF T_LEVEL OCCURS 1,
 LEVEL TYPE I,
 INDEX_FROM TYPE I,
 INDEX_TO TYPE I,
 END OF T_LEVEL.
T_LEVEL-LEVEL = P_GROUPS-LEVEL.
T_LEVEL-INDEX_FROM = P_GROUPS-INDEX_FROM.
T_LEVEL-INDEX_TO = P_GROUPS-INDEX_TO.
APPEND T_LEVEL.
Check livel:
CALL FUNCTION 'ALV_GROUPLEVELS_GET'
 IMPORTING
 ET_GROUPS = GT_GROUP
 TABLES
 T_OUTTAB = <FS_OUTPUT>.
RUN_LEVEL = P_GROUPS-LEVEL + 1.
IF RUN_LEVEL <= LEVEL.
 DO.
 LOOP AT GT_GROUP INTO WA_GROUP
 WHERE INDEX_FROM => P_GROUPS-INDEX_FROM
 AND INDEX_TO <= P_GROUPS-INDEX_TO
 AND LEVEL = RUN_LEVEL.
 T_LEVEL-LEVEL = RUN_LEVEL.
 T_LEVEL-INDEX_FROM = WA_GROUP-INDEX_FROM.
 T_LEVEL-INDEX_TO = WA_GROUP-INDEX_TO.
 ENDLOOP.
 IF SY-SUBRC = 0.
 APPEND T_LEVEL.
 ENDIF.
 RUN_LEVEL = RUN_LEVEL + 1.
 IF RUN_LEVEL > LEVEL. EXIT. ENDIF.
 ENDDO.
ENDIF.
SORT T_LEVEL BY LEVEL DESCENDING.
LOOP AT T_LEVEL.
 TOT_SALDO_A = TOT_FATTURATO_A = 0.
 LOOP AT <FS_OUTPUT> INTO <FS_WA_OUT>
 FROM T_LEVEL-INDEX_FROM
 TO T_LEVEL-INDEX_TO.
 ASSIGN COMPONENT 'ZSALDO'
 OF STRUCTURE <FS_WA_OUT> TO <FS_SALDO>.
 ASSIGN COMPONENT 'ZFATTURATO'
 OF STRUCTURE <FS_WA_OUT> TO <FS_FATTURATO>.
 TOT_SALDO_A = TOT_SALDO_A + <FS_SALDO>.
 TOT_FATTURATO_A = TOT_FATTURATO_A + <FS_FATTURATO>.
 ENDLOOP.
 TOT_SALDO = TOT_SALDO + TOT_SALDO_A .
 TOT_FATTURATO = TOT_FATTURATO + TOT_FATTURATO_A.
 PERFORM CALCULATE_DSO USING TOT_FATTURATO_A
 TOT_SALDO_A TOT_DSO_A.
 PERFORM WRITE_TOT_DSO
 USING TOT_SALDO_A
 TOT_FATTURATO_A TOT_DSO_A
 T_LEVEL-LEVEL T_LEVEL-INDEX_FROM.
ENDLOOP.
ENDFORM. " WRITE_SUB_TOTAL
Max

Need help in getting subtotal in ALV

Hi Experts
I've done subtotal in ALV. I'm getting below output. But i want net value subtotal should come by adding to its previous subtotal.
Ex : 4969 02.01.1997 CURA 5.500
 4970 03.01.1997 CURA 38.338 (32.838 + 5.500)
My code :
type-pools slis.
data : BEGIN OF ty_vbak OCCURS 0,
 VBELN like vbak-vbeln,
 erdat like vbak-erdat,
 ernam like vbak-ernam,
 netwr like vbak-netwr,
 END OF ty_vbak.
DATA : it_fcat type SLIS_T_FIELDCAT_ALV,
 WA_FCAT TYPE SLIS_FIELDCAT_ALV,
 IT_SORT TYPE SLIS_T_SORTINFO_ALV,
 WA_SORT TYPE SLIS_SORTINFO_ALV,
 G_VBELN TYPE VBAK-VBELN.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
 EXPORTING
 I_PROGRAM_NAME = SY-REPID
 I_INTERNAL_TABNAME = 'TY_VBAK'
* I_STRUCTURE_NAME =
* I_CLIENT_NEVER_DISPLAY = 'X'
 I_INCLNAME = SY-REPID
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
 CHANGING
 CT_FIELDCAT = it_fcat.
SELECT-OPTIONS S_VBELN FOR G_VBELN.
SELECT VBELN ERDAT ernam NETWR
 FROM VBAK INTO TABLE ty_vbak WHERE VBELN IN S_VBELN.
* WA_FCAT-FIELDNAME = 'VBELN'.
* WA_FCAT-SELTEXT_M = 'Sales Document'.
* WA_FCAT-OUTPUTLEN = 20.
* APPEND WA_FCAT TO IT_FCAT.
* WA_FCAT-FIELDNAME = 'ERDAT'.
* WA_FCAT-SELTEXT_M = 'DATE'.
* APPEND WA_FCAT TO IT_FCAT.
* WA_FCAT-FIELDNAME = 'NETWR'.
* WA_FCAT-SELTEXT_M = 'NET PRICE'.
* WA_FCAT-DO_SUM = 'X'.
* WA_FCAT-OUTPUTLEN = 40.
* APPEND WA_FCAT TO IT_FCAT.
* CLEAR WA_FCAT.
READ TABLE IT_FCAT INTO WA_FCAT WITH KEY FIELDNAME = 'NETWR'.
WA_SORT-FIELDNAME = 'ERDAT'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
WA_FCAT-FIELDNAME = ' '.
WA_FCAT-DO_SUM = 'X'.
MODIFY IT_FCAT FROM WA_FCAT TRANSPORTING
 DO_SUM KEY WHERE FIELDNAME = 'NETWR'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
* I_CALLBACK_PROGRAM = ' '
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* I_CALLBACK_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
* I_GRID_TITLE =
* I_GRID_SETTINGS =
* IS_LAYOUT =
 IT_FIELDCAT = IT_FCAT
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
 IT_SORT = IT_SORT
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
 TABLES
 T_OUTTAB = ty_vbak
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.

Hi,
Please try the below Sample code once.
TYPE-POOLS : SLIS.
types : begin of ty_final,
 vbeln type vbak-vbeln,
 posnr type vbap-posnr,
 ernam type vbak-ernam,
 erdat type vbak-erdat,
 netwr type vbak-netwr,
 COL(4) TYPE C,
 end of ty_final.
data : lt_vbak type table of vbak,
 lt_vbap type table of vbap,
 wa_vbap type vbap,
 wa_vbak type vbak,
 lt_final type table of ty_final,
 wa_final type ty_final,
 LT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
 WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
 WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
 L_NETWR TYPE VBAK-NETWR,
 INDEX TYPE SY-INDEX.
 select * from vbak into table lt_vbak up to 100 rows.
if lt_vbap is not initial.
 select * from vbap into table lt_vbap for all entries in lt_vbak where vbeln = lt_vbak-vbeln.
endif.
 LOOP AT LT_VBAP INTO WA_VBAP.
 INDEX = INDEX + 1.
 READ TABLE LT_VBAK INTO WA_VBAK WITH KEY VBELN = WA_VBAP-VBELN.
 WA_FINAL-VBELN = WA_VBAK-VBELN.
 WA_FINAL-POSNR = WA_VBAP-POSNR .
 WA_FINAL-ERNAM = WA_VBAK-ERNAM.
 WA_FINAL-ERDAT = WA_VBAK-ERDAT.
 WA_FINAL-NETWR = WA_VBAP-NETWR.
 APPEND WA_FINAL TO LT_FINAL.
 L_NETWR = L_NETWR + WA_FINAL-NETWR.
 AT END OF VBELN.
 WA_FINAL-VBELN = ' '.
 WA_FINAL-POSNR = ' ' .
 WA_FINAL-ERNAM = 'Sub Total'.
 WA_FINAL-ERDAT = ' '.
 WA_FINAL-NETWR = L_NETWR.
 WA_FINAL-COL = 'C310'.
 INDEX = INDEX + 1.
 INSERT WA_FINAL INTO LT_FINAL INDEX INDEX.
 CLEAR : WA_FINAL, WA_VBAK, WA_VBAP.
 ENDAT.
ENDLOOP.
*Build fieldcat
 PERFORM BUILDFIELDCAT USING : '1' 'VBELN' 'LT_FINAL' 'VBELN' ,
 '2' 'POSNR' 'LT_FINAL' 'POSNR' ,
 '3' 'ERNAM' 'LT_FINAL' 'ERNAM' ,
 '4' 'ERDAT' 'LT_FINAL' 'ERDAT' ,
 '5' 'NETWR' 'LT_FINAL' 'NETWR'.
* Layout Design
WA_LAYOUT-ZEBRA = 'X'.
WA_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
WA_LAYOUT-INFO_FIELDNAME = 'COL'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = SY-CPROG
 I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
 I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
 IS_LAYOUT = WA_LAYOUT
 IT_FIELDCAT = LT_FIELDCAT
 I_SAVE = 'A'
 TABLES
 T_OUTTAB = LT_FINAL.
*& Form BUILDFIELDCAT
FORM BUILDFIELDCAT USING P_COL_POS
 P_FIELDNAME
 P_REF_TAB
 P_SEL_TXT. "#EC *
WA_FIELDCAT-COL_POS = P_COL_POS.
WA_FIELDCAT-FIELDNAME = P_FIELDNAME.
WA_FIELDCAT-SELTEXT_L = P_SEL_TXT .
APPEND WA_FIELDCAT TO LT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. " BUILDFIELDCAT
Regards,
Srikanth

Multiple level of subtotal in alv

Hi Experts,
Can any one tell me how to get multiple level of subtotal in alv?
I am using function module to get the output.

Hi Surajit
can you explain ur requirement
Regards
Prabumanoharan

How to do subtotal in alv?

Hi,
I have a problem to do the subtotal in alv.
The outlook of alv now is as following:
Specimen Adversary Amount
ZZZ 300100089 1050
ZZZ 300100089 -1050
90256243 300100000 193410
90256242 300100000 173250
90256241 300100000 173250
90256240 300100000 173250
90256239 300100000 173250
90256238 300100000 173250
90256237 300100000 173250
What I need to do it to sum up the amount for same "ADVERSARY"
The out-come image should be
Specimen Adversary Amount
ZZZ 300100089 1050
ZZZ 300100089 -1050
subtotal 0
90256243 300100000 193410
90256242 300100000 173250
90256241 300100000 173250
90256240 300100000 173250
90256239 300100000 173250
90256238 300100000 173250
90256237 300100000 173250
subtotal 1232910
Question:
How can I add the subtotal in alv?
Please help!!
The following is the original coding:
END-OF-SELECTION.
SORT t.
LOOP AT t.
AT NEW bukrs.
CLEAR anz_dl.
CLEAR htext-anzahl.
CLEAR htext-datei.
htext-text1 = ' records writen in file '.
CLEAR p_pfad.
CONCATENATE
i_pfad
'CU_CC'
t-bukrs
sy-datum+6(2)
sy-datum+4(2)
sy-datum(4)
sy-uzeit
'.txt'
INTO p_pfad.
CLEAR outtab.
REFRESH outtab.
REFRESH: gt_outalv. "INS MG020207
ENDAT.
IF t-shkzg = 'H'.
h_betrg = t-wrbtr * -1.
ELSE.
h_betrg = t-wrbtr.
h_dmbtr = t-dmbtr.
ENDIF.
s-filler1 = s-filler2 = s-filler3 = s-filler4 = s-filler5 = ';'.
s-filler6 = s-filler7 = s-filler8 = ';'.
s-filler9 = s-filler10 = s-filler11 = s-filler12 = s-filler13 = ';'.
s-filler14 = ';'.
s-belnr = t-belnr.
IF t-xblnr NE space. "WD041005a
s-xblnr = t-xblnr. "WD041005a
ELSE. "WD041005a
s-xblnr = t-belnr. "WD041005a
ENDIF. "WD041005a
WHILE s-xblnr(1) EQ '0'. "INS MG130606
SHIFT s-xblnr LEFT. "INS MG130606
ENDWHILE. "INS MG130606
WRITE t-kunnr TO s-kunnr NO-ZERO.
s-lifn2 = s-kunnr.
shift s-lifn2 RIGHT.
s-lifn2(1) = 'R'.
S-KUNNR = T-KUNNR+5(5).
s-bldat+2(1) = '/'.
s-bldat+5(1) = '/'.
s-bldat0(2) = t-bldat4(2).
s-bldat3(2) = t-bldat6(2).
s-bldat6(4) = t-bldat0(4).
s-budat+2(1) = '/'.
s-budat+5(1) = '/'.
s-budat0(2) = t-budat4(2).
s-budat3(2) = t-budat6(2).
s-budat6(4) = t-budat0(4).
s-netdt+2(1) = '/'.
s-netdt+5(1) = '/'.
s-netdt0(2) = t-netdt4(2).
s-netdt3(2) = t-netdt6(2).
s-netdt6(4) = t-netdt0(4).
s-waers = t-waers.
s-dmbtr = t-dmbtr.
s-sgtxt = t-sgtxt.
CLEAR s-twaer.
SELECT SINGLE waers INTO s-twaer
FROM t001
WHERE bukrs = t-bukrs.
IF h_betrg < 0.
hs_betrg+0(1) = '-'.
ELSE.
hs_betrg+0(1) = ' '.
ENDIF.
WRITE h_betrg CURRENCY t-waers TO hs_betrg+1 NO-GROUPING
NO-SIGN
LEFT-JUSTIFIED.
REPLACE ',' WITH '.' INTO hs_betrg.
WRITE hs_betrg TO s-betrg.
IF h_dmbtr < 0.
hs_betrg+0(1) = '-'.
ELSE.
hs_betrg+0(1) = ' '.
ENDIF.
WRITE h_dmbtr CURRENCY t-waers TO hs_betrg+1 NO-GROUPING
NO-SIGN
LEFT-JUSTIFIED.
REPLACE ',' WITH '.' INTO hs_betrg.
WRITE hs_betrg TO s-dmbtr.
s-compcode = t-bukrs. "fw070905
IF p_downl = 'X'.
MOVE s TO outtab-s.
APPEND outtab.
ADD 1 TO anz_dl.
ENDIF.
gs_outalv-belnr = s-belnr. "INS MG020207
*<<<< CR01 START ADD as_outalv-zuonr
gs_outalv-zuonr = s-zuonr. "CR01
*>>>> CR01 EDD ADD as_outalv-zuonr
gs_outalv-kunnr = s-kunnr. "INS MG020207
gs_outalv-bldat = s-bldat. "INS MG020207
gs_outalv-netdt = s-netdt. "INS MG020207
gs_outalv-betrg = s-betrg. "INS MG020207
gs_outalv-waers = s-waers. "INS MG020207
gs_outalv-compcode = s-compcode. "INS MG020207
gs_outalv-budat = s-budat. "INS MG020207
gs_outalv-sgtxt = s-sgtxt.
gs_outalv-kmmnt = s-kmmnt.
gs_outalv-vbeln = s-vbeln.
gs_outalv-xblnr = s-xblnr.
gs_outalv-lifn2 = s-lifn2.
gs_outalv-dmbtr = s-dmbtr.
gs_outalv-twaer = s-twaer.
APPEND gs_outalv TO gt_outalv. "INS MG020207
AT END OF bukrs.
WRITE anz_dl TO htext-anzahl.
WRITE p_pfad TO htext-datei.
CONDENSE htext.
IF p_downl = 'X'.
SKIP 2.
WRITE: / htext.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = p_pfad
filetype = 'ASC'
TABLES
data_tab = outtab
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
IF sy-subrc 0.
write: / 'Error creating File:', P_Pfad, sy-subrc.
MESSAGE e405 WITH text-002 p_pfad.
ENDIF.
ENDIF.
*<<<<< INS MG020207
IF p_alvd EQ 'X'.
PERFORM build_layout_data.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = 'GT_OUTALV'
is_layout = gs_layout
it_fieldcat = gt_fieldcat[]
i_callback_top_of_page = 'TOP-OF-PAGE'
TABLES
t_outtab = gt_outalv.
ENDIF.
*>>>>> INS MG020207
ENDAT.
ENDLOOP.

Check this code....it will help you...reward if useful.
REPORT ZPP473_VEHICLE_REVERSAL_REP NO STANDARD PAGE HEADING
 MESSAGE-ID ZPP.
TABLES:ZPP18_RT_CORR.
TYPE-POOLS:SLIS.
DATA:BEGIN OF WA_VEH_REV,
VEHNO TYPE ZPP18_RT_CORR-VEHNO,
MATNR TYPE ZPP18_RT_CORR-MATNR,
WERKS TYPE ZPP18_RT_CORR-WERKS,
MDV01 TYPE ZPP18_RT_CORR-MDV01,
ENGNO TYPE ZPP18_RT_CORR-ENGNO,
FRMNO TYPE ZPP18_RT_CORR-FRMNO,
ERFMG TYPE ZPP18_RT_CORR-ERFMG,
SHIFT TYPE ZPP18_RT_CORR-SHIFT,
ZUNAME TYPE ZPP18_RT_CORR-ZUNAME,
ZDATE TYPE ZPP18_RT_CORR-ZDATE,
MAKTX TYPE MAKT-MAKTX,
ZREASON_DES TYPE ZPP17_REASON_COD-ZREASON_DES,
*VTEXT TYPE T179T-VTEXT,
END OF WA_VEH_REV.
DATA:IT_VEH_REV LIKE STANDARD TABLE OF WA_VEH_REV.
DATA: ALVFLD TYPE SLIS_FIELDCAT_ALV,
 FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: WK_LAYOUT TYPE SLIS_LAYOUT_ALV,
 I_SORT TYPE SLIS_T_SORTINFO_ALV,
 W_SORT LIKE LINE OF I_SORT.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS:
SO_ZDATE FOR ZPP18_RT_CORR-ZDATE OBLIGATORY,
SO_WERKS FOR ZPP18_RT_CORR-WERKS,
SO_SHIFT FOR ZPP18_RT_CORR-SHIFT,
SO_MDV01 FOR ZPP18_RT_CORR-MDV01,
SO_MATNR FOR ZPP18_RT_CORR-MATNR,
SO_VEHNO FOR ZPP18_RT_CORR-VEHNO,
SO_ENGNO FOR ZPP18_RT_CORR-ENGNO,
SO_FRMNO FOR ZPP18_RT_CORR-FRMNO,
SO_UNAME FOR ZPP18_RT_CORR-ZUNAME.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
**GET REVERSAL,MATERIAL DESCRIPTIONS, REASON DESCRIPTIONS
SELECT ZPP18_RT_CORR~VEHNO
 ZPP18_RT_CORR~MATNR
 ZPP18_RT_CORR~WERKS
 ZPP18_RT_CORR~MDV01
 ZPP18_RT_CORR~ENGNO
 ZPP18_RT_CORR~FRMNO
 ZPP18_RT_CORR~ERFMG
 ZPP18_RT_CORR~SHIFT
 ZPP18_RT_CORR~ZUNAME
 ZPP18_RT_CORR~ZDATE
 MAKT~MAKTX
 ZPP17_REASON_COD~ZREASON_DES
INTO TABLE IT_VEH_REV FROM
ZPP18_RT_CORR INNER JOIN MAKT
ON ( ZPP18_RT_CORRMANDT = MAKTMANDT AND
ZPP18_RT_CORRMATNR = MAKTMATNR )
INNER JOIN ZPP17_REASON_COD
ON ( ZPP18_RT_CORRMANDT = ZPP17_REASON_CODMANDT AND
ZPP18_RT_CORRZREASON = ZPP17_REASON_CODZREASON )
CLIENT SPECIFIED
WHERE ZPP18_RT_CORR~MANDT = SY-MANDT
AND ZPP18_RT_CORR~ZDATE IN SO_ZDATE
AND ZPP18_RT_CORR~WERKS IN SO_WERKS
AND ZPP18_RT_CORR~SHIFT IN SO_SHIFT
AND ZPP18_RT_CORR~MATNR IN SO_MATNR
AND ZPP18_RT_CORR~MDV01 IN SO_MDV01
AND ZPP18_RT_CORR~VEHNO IN SO_VEHNO
AND ZPP18_RT_CORR~ENGNO IN SO_ENGNO
AND ZPP18_RT_CORR~FRMNO IN SO_FRMNO
AND ZPP18_RT_CORR~ZUNAME IN SO_UNAME
AND MAKT~SPRAS = SY-LANGU.
IF SY-SUBRC = 0.
 SORT IT_VEH_REV ASCENDING BY ZDATE SHIFT WERKS MDV01 MATNR.
ELSE.
 MESSAGE I961 WITH 'No Data Found...Try Again !!!'.
 STOP.
ENDIF.
**BUILD ALV DISPLAY.
DEFINE ALV_MACRO.
 ALVFLD-FIELDNAME = &1.
 ALVFLD-SELTEXT_M = &2.
 ALVFLD-COL_POS = &3.
 IF &1 = 'ERFMG'.
 ALVFLD-DO_SUM = 'X'.
 ENDIF.
 APPEND ALVFLD TO FIELDCAT.
 CLEAR ALVFLD.
END-OF-DEFINITION.
REFRESH FIELDCAT.
WK_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
ALV_MACRO 'ZDATE' 'Rev.Date' '1'.
ALV_MACRO 'SHIFT' 'Shift' '2'.
ALV_MACRO 'WERKS' 'Plant' '3'.
ALV_MACRO 'MDV01' 'Conveyor' '4'.
ALV_MACRO 'MATNR' 'Material.No' '5'.
ALV_MACRO 'MAKTX' 'Description' '6'.
ALV_MACRO 'VEHNO' 'Veh.No' '7'.
ALV_MACRO 'ENGNO' 'Eng.No' '8'.
ALV_MACRO 'FRMNO' 'Frame.No' '9'.
ALV_MACRO 'ERFMG' 'Qty' '10'. <----Do Sum Here
ALV_MACRO 'ZREASON_DES' 'Reason' '11'.
ALV_MACRO 'ZUNAME' 'User.Reversed' '12'.
REFRESH I_SORT.
W_SORT-SPOS = 1.
W_SORT-FIELDNAME = 'ZDATE'.
W_SORT-UP = 'X'.
APPEND W_SORT TO I_SORT.
CLEAR W_SORT.
W_SORT-SPOS = 6.
W_SORT-FIELDNAME = 'MAKTX'.
W_SORT-UP = 'X'.
W_SORT-SUBTOT = 'X'.
APPEND W_SORT TO I_SORT.
CLEAR W_SORT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_GRID_TITLE = 'Vehicle Reversal Report'
 IS_LAYOUT = WK_LAYOUT
 IT_FIELDCAT = FIELDCAT[]
 IT_SORT = I_SORT[]
 TABLES
 T_OUTTAB = IT_VEH_REV[]
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END-OF-SELECTION.

Subtotaling in ALV(urgent)

Hi experts,
can anyone tell how to achieve the subtotaling in ALV'S.any pseudo code .points will be awarded.
Regards,
nagaraj

Hello Nagaraj,
In the sort table use:
REFRESH IT_SORT.
CLEAR: G_S_SORT,G_S_SORT.
G_S_SORT-SPOS = 1.
G_S_SORT-FIELDNAME = 'EBELN'.
G_S_SORT-UP = 'X'.
G_S_SORT-DOWN = ' '.
 G_S_SORT-SUBTOT = 'X'.
G_S_SORT-EXPA = ' '.
APPEND G_S_SORT TO IT_SORT.
If useful reward.
Vasanth

How to generate a dynamic ALV

give me some points on how to generate the dynamic Alv using RTTS and why it is useful to generate this way

Hi ,
Please follow this link
RTTS question
problem with coloring cells in dynamic fieldcatalog
Regards,
Pravin

Restriction on subtotal in ALV

Dear ALL
I have requirement like for one particular column in ALV report subtotal should not be enable only sorting can be done .
If user clicks on subtotal button for that particular field then system generated message should come subtotal on this field is not possible.
Let me know how can I achieve this i tried using
no-sum field of ALV fieldcat but this is not working .
Regards
Sunanda Mandavi

Hi,
This doesn't seems to be possible using 'REUSE_ALV_GRID_DISPLAY', though you can use the OOPS ALV and overwrite the SubTotal method to write a custom code to check that the specific column is not selected.
Regards,
Nirmal

Spool not getting generated in OO ALV report

Hi,
I developed a report in which we are giving output in same selection screen through OO ALV.
But,when we are scheduling that report in background,spool is not getting generated.
Waiting for your reply.
BR,
Praveen

Hi Aparna,
I tried NEW-PAGE PRINT ON.
I am pasting source code extract below:
   IMPORT DATA = ME->IT_FINAL2 FROM MEMORY ID SY-CPROG.
    FREE MEMORY ID SY-CPROG.
    CHECK ME->IT_FINAL2 IS NOT INITIAL.
    CHECK LO_DOCK IS INITIAL.
    CREATE OBJECT LO_DOCK
      EXPORTING
        REPID = SY-REPID
        DYNNR = SY-DYNNR
        RATIO = 70
        SIDE = CL_GUI_DOCKING_CONTAINER=>DOCK_AT_BOTTOM
        NAME = 'DOCK_CONT'.
    IF SY-SUBRC NE 0.
      MESSAGE 'Error in Docking Control' TYPE 'S'.
    ENDIF.
    IF LO_ALV IS INITIAL.
      TRY.
          LO_CONT ?= LO_DOCK.
          CALL METHOD CL_SALV_TABLE=>FACTORY
            EXPORTING
              LIST_DISPLAY   = IF_SALV_C_BOOL_SAP=>FALSE
              R_CONTAINER    = LO_CONT
              CONTAINER_NAME = 'DOCK_CONT'
            IMPORTING
              R_SALV_TABLE   = LO_ALV
            CHANGING
              T_TABLE        = ME->IT_FINAL2.
        CATCH CX_SALV_MSG.
      ENDTRY.
CLEAR LR_COLUMN.
      TRY.
          LR_COLUMNS = LO_ALV->GET_COLUMNS( ).
          LR_COLUMN = LR_COLUMNS->GET_COLUMN( 'KSCHL' ).
          LR_COLUMN->SET_LONG_TEXT( 'Cond.Type' ).
CATCH CX_SALV_NOT_FOUND.
      ENDTRY.
NEW-PAGE PRINT ON.
        LO_ALV->DISPLAY( ).
        NEW-PAGE PRINT OFF.
I am not getting spool list while executing it in background.
BR,
Praveen

Subtotal in ALV grid for a particular type and Grand total in ALV

Hi,
I need to have sub total for a particular type(eg: goods, services).. and grand total at end in ALV grid..
ALV output required as below:
Type VAT registration number Country Total Gross Amounts Total Tax Amounts Total Amount, ex-tax
Goods ATU12345678 AT 222.42 0 222.42
Goods NL123456789B02 NL 3,417.00 0 3,417.00
 Goods Total 3,639.42 - 3,639.42
Services ATU12345678 AT 2,342.34 0 2,342.34
Services NL123456789B02 NL 223.33 0 223.33
 Services Total 2,565.67 - 2,565.67
 Grand Total 6,205.09 - 6,205.09
Let me as to how to achieve the above type in ALV grid...
Regards
Shiva

check this link..
Grand Totals in ALV grid disply function module
or do like this..
REPORT ZALVTESTFORSUBTOTAL.
tables:pa0008.
type-pools:slis.
types:begin of ty_pa0008,
 pernr like pa0008-pernr,
 begda like pa0008-begda,
 endda like pa0008-endda,
 ansal like pa0008-ansal,
 lga01 like pa0008-lga01,
 bet01 like pa0008-bet01,
 end of ty_pa0008.
data:it_pa0008 type standard table of ty_pa0008 with header line.
data:it_fieldcat type SLIS_T_FIELDCAT_ALV,
 wa_fieldcat type slis_fieldcat_alv,
 it_layout type slis_layout_alv,
 WA_events TYPE slis_alv_event,
 it_events TYPE slis_t_event.
select-options:s_pernr for pa0008-pernr.
start-of-selection.
perform getD_data.
perform disp_alv.
*& Form getD_data
 text
--> p1 text
<-- p2 text
form getD_data .
select pernr
 begda
 endda
 ansal
 lga01
 bet01
 from pa0008
 into table it_pa0008
 where pernr in s_pernr.
sort it_pa0008 by pernr begda descending.
endform. " getD_data
*& Form disp_alv
 text
--> p1 text
<-- p2 text
form disp_alv .
wa_fieldcat-fieldname = 'PERNR'.
wa_FIELDCAT-REPTEXT_DDIC = 'Personnel no'.
*WA_FIELDCAT-no_subtotals = 'X'.
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname = 'BEGDA'.
wa_FIELDCAT-REPTEXT_DDIC = 'Start date'.
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname = 'ENDDA'.
wa_FIELDCAT-REPTEXT_DDIC = 'End date'.
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname = 'ANSAL'.
wa_FIELDCAT-REPTEXT_DDIC = 'Annula salary'.
wa_fieldcat-do_sum = 'X'.
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname = 'LGA01'.
wa_FIELDCAT-REPTEXT_DDIC = 'Wage Type'.
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
wa_fieldcat-fieldname = 'BET01'.
wa_FIELDCAT-REPTEXT_DDIC = 'Amount for wagetype'.
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
DATA: sort TYPE slis_sortinfo_alv,
it_sort TYPE slis_t_sortinfo_alv.
sort-fieldname = 'PERNR'.
sort-subtot = 'X'.
SORT-UP = 'X'.
APPEND sort TO it_sort.
*sort-fieldname = 'BEGDA'.
*SORT-NO_SUBTOTS = 'X'.
*APPEND sort TO it_sort.
IT_layout-totals_text = 'total text'.
IT_layout-subtotals_text = 'Subtotal text'.
*WA_EVENTS-NAME = 'SUBTOTAL TEXT'.
*WA_EVENTS-FORM = 'SUBTOTAL TEXT'.
*APPEND WA_EVENTS TO IT_EVENTS.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
 I_CALLBACK_PROGRAM = sy-repid
 IS_LAYOUT = it_LAYOUT
 IT_FIELDCAT = IT_FIELDCAT
 it_sort = it_sort
it_events = it_events
 TABLES
 t_outtab = it_pa0008 .
endform. " disp_alv

Generating subtotal in ALV...

Similar Messages

Maybe you are looking for