Generating the RM requirement based on the work order?

Does Oracle Disceret MFG has the provision of generating the RM requirement based on the work order?

Hi,
If you mean RM requisition as Material indent from Stores , then Yes, Component Pick Slip is the form
Regards
S

Similar Messages

How to determine the hardware requirements based on the Services' payload

hello,Guys
i am wondering if i can calculate the hardware requirements based on the services' payload ?
what factors should i consider when to determine the hardware requirements?
is there any documents related to my questions? ;)
Thanks
Regards
Wen

Payload size is not the only factor while determining size of the system (h/w). You need to consider number of services, nature of services (sync/async), payload size, frequency of messages (load), peak load value, security constraints, performance requirements etc..
You may contact your local Oracle Sales Representative/ Oracle Support to get help in determining size of the system. They will provide you a sizing questionarre and on the basis of that they may suggest sizing as well (Oracle has an internal tool for proposing sizing)
Regards,
Anuj

Can we control the PDF file name that is generated by BI Publisher based on the content in the input PDF

can we control the PDF file name that is generated by BI Publisher based on the content in the input PDF?

No, there isn't. The way you're using the file is not recommended. You
should use a review tracker to avoid getting in the way of one another.

My problem I worked updated iPhone 3 gs (ios4.1) to version (ios6), and when operating the device required to activate the phone and therefore appears to me aftermarket says (IMEI 01 216 300 555 018 3 ) ICCCID unknown.

My problem I worked updated iPhone 3 gs (ios4) to version (ios6), and when operating the device required to activate the phone and therefore appears to me aftermarket says (IMEI 01 216 300 555 018 3 ) ICCCID unknown.
There is no network
I hope that I showed you my problem

That's a critical failure. It can not be fixed. It is usually the result of jailbreaking or hacking the phone to unlock it.

When saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?

when saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?. i would like to know what changes, so in the future i can set my camera to a setting that will give me the highest quality to begin with,allowing me to make crops and still preserve the quality.
thank you
dovid

It's the level of compression. Lower number, more aggressive compression, more visual artifacts.
Aside from that you should never use jpeg as a working format. The compression is destructive and cumulative, and the file deteriorates every time you resave it.
Use TIFF or PSD, and if you need jpeg save out a copy as a single final step.

How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values?

How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values? I'm using the Integrator named "Projects - Transaction Import" and a custom Layout created based on the seeded Layout named "Transaction Import - Accounted". Do I need to somehow change my Layout to make the Document accept numerical values instead of requiring alpha-numeric values? I need to be able to populate the Document with a large amount of transactions and cannot feasibly go through every transaction to add the alpha-valued name of the account segment to every segment that requires it. The segments in particular causing the problem are "Expnd Type" and "Organization Name" which are both alpha-numeric and as such contain the segment number and name; I need to be able to only have to enter the Natural Account Number (6-digit number only) and the Organization Number (5-digit number only).

How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values? I'm using the Integrator named "Projects - Transaction Import" and a custom Layout created based on the seeded Layout named "Transaction Import - Accounted". Do I need to somehow change my Layout to make the Document accept numerical values instead of requiring alpha-numeric values? I need to be able to populate the Document with a large amount of transactions and cannot feasibly go through every transaction to add the alpha-valued name of the account segment to every segment that requires it. The segments in particular causing the problem are "Expnd Type" and "Organization Name" which are both alpha-numeric and as such contain the segment number and name; I need to be able to only have to enter the Natural Account Number (6-digit number only) and the Organization Number (5-digit number only).

How to get the pricing hierarchy based on the delivery date for sales order

Hi,
How to get the pricing hierarchy based on the delivery date for sales order other than system date.
My requirement is to get the Pricing hierarchy based on the delivery date other than system date.
Waiting for kind response.
Best Regards,
BDP

HI Sai,
please refer teh document already how to write FM based extration on generic extractors.
and here the logic to find the latest records values:-
-> get the data in an internal table
->Sort the internal table data based from date descending
-> Using READ statement , we can read the first record of the table which is nothign but your latest record.
Regards.
Sakthi

How to show regions markers in Google maps based on longitude and latitude. on-click of region marker i want to display all the country locations based on the region from share point list?

Hello every one,
In My requirement i am having some regions with longitude and latitude in one SharePoint list. in another SharePoint list i am having the country values with longitude and latitude and region as look up field. I want to display all the region
markers in Google maps. on click of any region marker i want to zoom in the map to region level and i need to display all the country markers in Google maps under the region. can any body help me on this requirement.
Thanks in advance,
Venu.

Not sure about Google Maps but this is fairly easy to do with Bing Maps. I've used Bing Maps with SharePoint lists fairly regularly. Here are some blog posts:
http://blogs.bing.com/maps/2013/03/26/connecting-a-sharepoint-list-to-bing-maps/
http://blogs.bing.com/maps/2013/03/07/geocoding-a-sharepoint-list-item/
Once you have your sharepoint list connected to Bing Maps you can easily filter the list data based on the selected country if you have a country column in your list. If you want to take things a bit further an create a much cooler user experience you can
also use the Bing Maps GeoData API to get the country boundaries and show them on the map as polygons. These could be color coded based on some metric, or set up as the clickable area on the map rather than a pushpin. Here is a blog post on how to use the
GeoData API with the JavaScript Bing Maps control:
http://blogs.bing.com/maps/2013/06/25/retrieving-boundaries-from-the-bing-spatial-data-services-preview/
http://rbrundritt.wordpress.com

Questions on the Hardware requirement mention in the 12c installation guide

Hello experts,
I have a confusion on the Hardware requirements mentioned in the 12c installation guide where they mentioned as below.
RAM with ADP1, JVMD2 8 GB 12 GB 20 GB
1 ADP Manager is Application Dependency and Performance
2 JVMD is JVM Diagnostics
Question 1: what does this RAM with ADP or JVMD mean. is it just the additional RAM space required in the server or does is that special requirement ??
Oracle WebLogic Server JVM Heap 1.7 GB 4 GB 8 GB
Size
Question 2: What is this JVM Heap size ? how do we configure this in the server ??
Thanks in Advance for your Help.

Hi,
#1: It means if you also want to install ADP and JVMD, the total RAM required is a small (e.g. < 1000 targets), medium (e.g. > 1000 targets and < 10000 targets), large EM deployment (e.g. > 10000 targets) is 8 GB, 12 GB, 20 GB, respectively. That is the memory requirement for an OMS host.
#2: The heap size for the OMS java process. You can adjust the heap size by changing the -Xmx<heapsize> (see an example below) in the following file:
<middleware_home>/gc_inst/user_projects/domains/GCDomain/bin/startEMServer.sh
An example of OMS heap size setting of 2048 MB:
if [ "${SERVER_NAME}" != "EMGC_ADMINSERVER" ] ; then
USER_MEM_ARGS="-Xms256m -Xmx1740m -XX:MaxPermSize=768M -XX:-DoEscapeAnalysis -XX:+UseCodeCacheFlushing"
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
if [ "${PRODUCTION_MODE}" = "" ] ; then
USER_MEM_ARGS="-Xms256m -Xmx2048m -XX:MaxPermSize=768M -XX:-DoEscapeAnalysis -XX:+UseCodeCacheFlushing -XX:+UseConcMarkSweepGC -XX:+UseParNewGC -XX:+CMSClassUnloadingEnabled -XX:CompileThreshold=8000 -XX:PermSize=128m"
Regards,
- Loc

SAP Standard report to view the asset balance- Based on the calender year

Hi ALL
Any sap standard programs are available to view the asset balance based on the calendar year not for the fiscal year.
Asset balance report S_ALR_87011964 will display based on the fiscal year in report date. For example I want to view the September month asset balance, Any standard report to view the calendar year wise output.
Regards
K.Gunasekar

Dear Gunasekar,
in Asset balance report S_ALR_87011964 you can view also a calendar year, you can enter every Reporting date in the progrm.
In RABEWG_ALV01 you can enter also a Capitalization date "from to". I think this is what you want.
regars Bernhard

What is the FM/BAPI to get the Goods Receipt Based on the Purchase Order

Hi ,
I want FM/BPI to get the Goods Receipt Based on the Purchase Order in MM.
Thnx in advance

Hi
BAPI_GOODSMVT_CREATE
Thanks & Regards
Kishore

How PIR's are consumed by the customer requirements even though the sales orders are blocked?

Dear experts,
I am using strategy 40 for material A with Backward/Forward consumption of 60 days backward and 60 days forward.
My PIR is as follows :-
Material Month #1 Month #2 Month #3 Month #4 Month #5 ....
material A 100 100 100 100 100 ....
I created a Sales Order for material A with the quantity of 600 in Day 4 of Month #1.
After MRP run, planned order conversion and production order has been completed.
Month #1, Month #2 and Month #3 PIR's are consumed even though we made the setting in Such a way that the sales orders should just display but not planned . and the sales orders are into the blocked requirements list in the result of /n/afs/MD02.
1)but why it is consuming the PIRS?
2)is there any affect of backward and forward consumption on this?
Thanks in advance.
Regards
Bhargavi Desai

Hi,
Normally it is recommended that, not to delete PIR's one by one or remove quantity from previous periods/ requirement manually. If the PIR's of previous month is not consumed it is normally a feedback to sales people to do a analysis at their end.
In PP point of view, normally a re-organization run is carried out by MD74, MD75 or MD76. The same can be done by scheduling batch job to run on month ends basis w.r.t. period you specify.
Regards,
Narresh

Calculate Avg for the given months based on the no. of days in months

Dear Experts
I have a report in which there is a characterictic claenderyr/month.The Input paramter is claenderyr/month which is restricted by a variable of type interval. i mean user will enter calenderyr/month as interval say 012010 to 06.2010. Now I have to calculate Avg sale Qty for the given months based on the no. of days for the given range of months. How I can achieve this in BW Query. Pl. advice
Dinesh Sharma

Hi,
Create formula for the sales qty.
maintain the exception aggregation as average based on calday
Best Regards,
M.H.REDDY

How to enable/disable the input fields based on the data entered/user action in the web dynpro abap?

How to enable/disable the input fields based on the data entered in the web dynpro application abap? If the user enters data in one input field then only the next input field should be enabled else it should be in disabled state. Please guide.

Hi,
Try this code.
First create a attribute with the name readonly of type wdy_boolean and bind it read_only property of input field of which is you want to enable or disable.
Next go to Init method.
Set the readonly value as 'X'.
DATA lo_el_context TYPE REF TO if_wd_context_element.
     DATA ls_context TYPE wd_this->element_context.
     DATA lv_visible TYPE wd_this->element_context-visible.
*   get element via lead selection
     lo_el_context = wd_context->get_element( ).
*   @TODO handle not set lead selection
     IF lo_el_context IS INITIAL.
     ENDIF.
*   @TODO fill attribute
*   lv_visible = 1.
*   set single attribute
     lo_el_context->set_attribute(
       name = `READONLY`
       value = 'X').
After that Go to the Action ENTER.
First read the input field ( first input field, which is value entered field) , next give a condition
if input value is not initial then set the readonly value is ' '.
DATA lo_nd_input TYPE REF TO if_wd_context_node.
     DATA lo_el_input TYPE REF TO if_wd_context_element.
     DATA ls_input TYPE wd_this->element_input.
     DATA lv_vbeln TYPE wd_this->element_input-vbeln.
*   navigate from <CONTEXT> to <INPUT> via lead selection
     lo_nd_input = wd_context->get_child_node( name = wd_this->wdctx_input ).
*   @TODO handle non existant child
*   IF lo_nd_input IS INITIAL.
*   ENDIF.
*   get element via lead selection
     lo_el_input = lo_nd_input->get_element( ).
*   @TODO handle not set lead selection
     IF lo_el_input IS INITIAL.
     ENDIF.
*   get single attribute
     lo_el_input->get_attribute(
       EXPORTING
         name = `VBELN`
       IMPORTING
         value = lv_vbeln ).
if lv_vbeln IS not INITIAL.
    DATA lo_el_context TYPE REF TO if_wd_context_element.
    DATA ls_context TYPE wd_this->element_context.
    DATA lv_visible TYPE wd_this->element_context-visible.
* get element via lead selection
    lo_el_context = wd_context->get_element( ).
* @TODO handle not set lead selection
    IF lo_el_context IS INITIAL.
    ENDIF.
* @TODO fill attribute
* lv_visible = 1.
* set single attribute
    lo_el_context->set_attribute(
      name = `READONLY`
      value = ' ' ).

Don't include last page of the SSRS report based on the parameter.

I created the report, which has 4 pages.
Each page contains bunch of tables and charts, which display data in scope of dataset, created for each page and reflecting certain subject.
Each page also has Header and Footer.
My users requested, the report has possibility to include or not include data on Page #4.
Other words, report should display 3 or 4 pages based on the entered parameter.
1. I created parameter named “Include #### metrics”, which contains options: Y, N
2. For each object on the page 4 I added dependency on the selected
parameter in the visibility option.
Now if user select parameter Not include Page #4, report displays 3 pages as expected and page #4 is empty, but with Header and Footer.
The problem: Their
preference is to not to show page 4 at all if someone chooses to not to include
#### metrics.
My question is how to force the report to display just 3 selected pages.

Hi MK0526,
Per my understanding that you have add page break to make the report to display on three diferent pages and you want to show and hide the fourth page based on the parameter selected, now the issue is although the content on the fourth page have been hidden
but the page header and page footer still display, right?
I have tested on my local envoronment and can reproduce the issue, the issue can be caused by the page break you have set, you may have check the "Add a page break after", please find the details information below to reset the page break:
Please create four rectangles and add all the content from each pages to include in each rectangle
Please check the "Add a page break before" for rectangle2, rectangle3,rectangle4 in the rectangle properties and not add any page break in the first rectangle (Rectangle1)
Add expression below to show/hide the rectangle4:
=iif(Parameters!IncludePage4.Value="No",true,false)
Now you will not see the page header and footer in the fourth page when you select "No" in the parameter.
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Generating the RM requirement based on the work order?

Similar Messages

Maybe you are looking for