Generation 4 Plug-in Charger
Team is it okay to use the old G4 Plun-in Charger to charge the Generation 5 iPod?
I'm not sure the batteries are rated the same is the reason I ask.
Yes, it will work fine.
Similar Messages
-
IPad fourth generation won't charge during use.
Hi, I recently noticed that my new iPad fourth generation won't charge while I'm using it. The lightning cord is plugged in and connected but the iPad keeps loosing battery while I use it when it signals 20% left! Why does it do this? Is Apple going to fix this? I love using iPad and I hate devices that need to be left alone for a while until fully charged... Anyways, is it normal? Does anyone else's iPads do this? Please tell me!!
Replace your 10W charger with a 12W charger.
http://store.apple.com/us/product/MD836LL/A/apple-12w-usb-power-adapter -
help me my ipod 4th generation will not charge. i have tryed a wall ataptor an other computers.What should i do? Should i get a new ipod or should i try and get a new charger and see if that helps.It has not been changing for two weeks straight now .Help Please.
Either your USB cable for the charger has been damaged or the part of the iPod where you insert the USB cable is damaged. This usually happens due to water damage or carelessly removing the USB plug off from the iPod. Hope this clears some doubts
You might also wanna try and check with the Genius Bar at Apple, they usually know whats wrong. -
Yoga 2 Pro "plugged in, charging" even when running on battery
A few weeks ago, my Yoga 2 Pro entered a permanent "plugged in, charging" state whether plugged in or running on just the battery. The battery drains as normal, it just always shows the plugged in icon. It also charges as normal. When I turn it off, the "plugged in" LED remains lit even after I unplug the power cord. Anyone else have similar issues? I'm tempted to rewrite the BIOS and see if this fixes it. Thanks for the help!
You, sir, are a life saver! I have no idea how the balance between the left and right speaker could've changed but, doesn't matter since it's fixed now! Thanks very much Dave!
-Katrina -
Next-generation plug-in 1.6 : ClassNotFoundException and not caching JARs
Hi,
Since the introduction of the next-generation plug-in in Java 1.6.0_10, the applet I have used and developed for many years don't load anymore.
The situation is this : the Jars of this applet are embedded in a Lotus Notes database as Java resources, in order to be used in a particular form in my application. Note that this application is accessed via a Web browser through a Domino server and that this application requires a user authentication. If I try to open the form containing the applet while using a plug-in 1.6.0_10 or newer, with default parameters (cache and next-generation plug-in activated), here is the exceptions I get (here with plug-in 1.6.0_20) :
load : class mycompany/tools/Planner not found.
java.lang.ClassNotFoundException: mycompany.tools.Planner
at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed:http://www.mycompany.com:80/test/database.nsf/46277DA0EF2790B0C12574040052D714/$FILE/mycompany/tools/Planner.class
at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 7 more
Exception : java.lang.ClassNotFoundException: mycompany.tools.PlannerBy reading a lot forums I found that a lot (really a lot) of people were experiencing the exact same issue, regardless of the type of server they used to host their applet. And unfortunately, only few answers were relevant to help me understand why I got this error...
By looking deeper in the documentation, I have found this [Applet Developer's guide|http://download.oracle.com/javase/6/docs/technotes/guides/jweb/applet/applet_dev_guide.html]. Here, it is written that one of the enhancement of the next-generation plug-in is that : "+... The JVM running the applet is isolated from the web browser at the operating system level. If something should go wrong while running the applet, or if an uncooperative applet refuses to shut down, the new Java Plug-in detects and handles the error condition gracefully; the Web browser is unaffected+".
I am not quite sure of what it really means, but I have started to think that my problem could be that, by running in a separate process than the one of the Web browser, loading the Jars will require an authentication on my server. To verify this hypothesis, I have changed the codebase of my applet, so the Jars are downloaded from another server where no user authentication is required. The good news is that my applet can now find the Jars and run as expected. The bad news is that none of the Jars are placed in the cache, which means that the Jars have to be downloaded each time I start a new session to work with my applet.
I have also tried to disable the "Use the next-generation plug-in" option in the Java control panel. In this case, everything is fine, too, and even the Jars are stored in the cache. The interesting thing is that afterwards, by enabling the "Use the next-generation plug-in" option again, the applet will load and run like a charm... because the Jars are in the cache and the class loader can find them! (I suspect that this case has been experienced by several people, answering on forum posts that they cannot reproduce the issue.)
Anyway, even if there is some workarounds to ensure it is possible to work with the latest versions of the plug-in, having to change the default options is not always easy or possible, depending of the environment. This applet that I am talking about is used by a lot of our customers and all have their internal policies and requirements regarding the Java configuration. If for some of them it will be possible to use a workaround, for others it will not. And this is a major problem to me.
As I said, a lot of people have experienced this issue. I hope that someone having a better understanding on how this next-generation plug-in works, will have a solution, or at least, will be able to explain what is wrong in this approach and if my suggestion regarding an authentication issue for the class loader make sense.
Any help will be greatly appreciated.
PhilippeHi,
I was wrong in my approach.
My applet was implemented using the "<object>" tag and it seems that it was not the best way to address compatibility issues across all versions of the plug-in and all browsers.
So, I have finally found what I was looking for in this "[Java Rich Internet Applications Development and Deployment|http://download.oracle.com/javase/6/docs/technotes/guides/jweb/index.html]" guide. In this guide, it is recommended to use the "[Deployment Toolkit|http://download.oracle.com/javase/6/docs/technotes/guides/jweb/deployment_advice.html#deplToolkit]", based on a Javascript library containing everything needed to deploy your application as an applet or a Java Web Start application.
My application, deployed as an applet, now works like a charm.
I hope pointing on this Deployment Toolkit will also help others...
Philippe -
My ipod is somehow synced to another library, because I plugged the charger to a wall. How can I sync my ipod shuffle back to the original Itunes library without erasing my current data in the Ipod shuffle?
",the owner sold the ipod without clearing the songs and since the songs were not puchased from the itunes store then i believe i now own the songs"
Not true at all.
It does not matter where the songs came from, they are not yours and the previous owner does not own the right to distribute them to others.
The law is the same with downloads and cds and any other medium. -
My iphone 5 does not turn on anymore. when i plug the charger in the apple icon turns on and off but the home screen never shows up.what do i do to fix it? how can i get my info back?
from the information you provided i can't tell if it is a hardware problem or a software problem. I do have an idea though, try to press your home button and lock button at the same time.
-
hi there, I need help .. I have 2 gen ipod touch and I restore my ipod around 11:00 pm and now its 1:20 am and on my screen its the iTunes logo and the usb cord and when I plug my charger in my laptop .. iTunes comes up and this what it saids "iTunes has detected an ipod recovery mode. you must restore this ipod before it can be used with iTunes" so what do I do.. do I let my ipod died right out & then try it .. because I restore it ,... it was beening to slow... so please help me ?
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
WiFi sync will not start automatically when plugging in charger
SInce upgrading my iPhone 4 and iPad 2 to IOS6 and downloading the latest version of iTunes, plugging the charger into the devices no longer triggers the WiFi sync. I can initiate the Wifi sync manually from either the device or iTunes.
Is this related to all of the messages out there with users having Wifi greyed out?I am having the same problem. It only works once in a while. I had to turn on Airplane Mode and sync using the cable. I found that workaround in this thread:
https://discussions.apple.com/thread/4304010?start=0&tstart=0 -
Ssvagent.exe does not always disable next-generation Plug-In
Around half the time running the "ssvagent.exe -high -jpisetup -old" in a vbs after the jre-6u22-windows-i586.exe process stops running
the next generation Plug-In option is not disabled.
I have verified that it does not run until after the Java installtion is complete.
Running "ssvagent.exe -high -jpisetup -old" manually right after installing Java will always disable next generation Plug-In.
Any ideas why it won't always run properly from a script?
Edited by: EthanD on Sep 20, 2012 10:21 AMHi,
I was wrong in my approach.
My applet was implemented using the "<object>" tag and it seems that it was not the best way to address compatibility issues across all versions of the plug-in and all browsers.
So, I have finally found what I was looking for in this "[Java Rich Internet Applications Development and Deployment|http://download.oracle.com/javase/6/docs/technotes/guides/jweb/index.html]" guide. In this guide, it is recommended to use the "[Deployment Toolkit|http://download.oracle.com/javase/6/docs/technotes/guides/jweb/deployment_advice.html#deplToolkit]", based on a Javascript library containing everything needed to deploy your application as an applet or a Java Web Start application.
My application, deployed as an applet, now works like a charm.
I hope pointing on this Deployment Toolkit will also help others...
Philippe -
Detecting if next generation plug-in is activated
Hi,
I am wondering if there is a way to programatically detect if the next generation plug-in check box is selected for the JRE/Control Panel (1.6_11).
We are having trouble with our software when this is enabled (the default) and want to notify the user to turn it off. I am assuming that this value is stored in the registry or some properties file but I can't seem to find it.
Thanks!
-RobThe Deployment Toolkit portion of this document
file:///C:/Program%20Files/Java/docs/technotes/guides/jweb/deployment_advice.html#deplToolkit
has a link to deployJava.js which contains a function that will tell you if the new plugin is active. -
I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?
More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed
-
my macbook air won't turn on.. last night it was still working properly... when i woke up this morning, i went to turn it on but it didn't respond..i tried plugging the charger and the lightning cord showed a green light which is normal when charging..i tried to open the macbook air again but nothing happened.. no fans, no chimes, no light in the laptop showed..what should i do? please help..thank you
Welcome to Apple Support Communities
A green light means that your battery is full or that it can't be detected. If you can't start up the Mac, probably your logic board or battery aren't working.
Take the MacBook to an Apple Store or reseller to get your battery or logic board replaced. If the MacBook is in warranty, this repair will be free -
i bought a locked at&t phone....
i sent it to be unlocked... got back a dead iphone 5s...
plugged the charger in the wall, it gives me a black screen then the white screen with the apple logo, then repeat....
i tried the dfu thing and now the phone is saying connect to itunes, when i plug the phone outta the wall, the phone goes dead.....
plugging the phone into the laptop NOTHING!!!!!!!!!!!!!!!!!!!!!
the laptop doe read my phone.....
no ding.....
the phone wont turn on....
NOTHING
can someone plz tell me what the **** is going onmariidb wrote:
i bought a locked at&t phone....
i sent it to be unlocked... got back a dead iphone 5s... {snip}
the phone wont turn on....
NOTHING
can someone plz tell me what the **** is going on
That's the problem. That's what the **** is going on. -
Showing "Plugged in, Charging" .... but not charging
Hi Everyone,
I bought HP Pavilion dv4 almost 18 months back .... suddenly it started giving me problems with charging the battery. When I start charging .. it says "Plugged in, charging" ... I left it for couple of hours while the system was switched on ... and I noticed that the charge was going down .... then I tried charging by switching off my laptop but still had no luck.
I checked my charger and the battery using my friends laptop which is same HP Pavilion dv4 and both were fine. In fact when I tested by placing my battery in my friends laptop it was completely charged to 100%.
I also tried charging my friends battery with my laptop and it is not charging. My operating system is Windows Vista.
Can someone please shed some light on this issue .....
Thanks in advance.1-remove power cord and battery
2-press power button for 20 seconds
3-reinstall only power cord
4-power on
5-shut down and reinstall battery
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
My iPhone 4 turns off (crashes) after accesing any apps, It work fine when plugged to charger (power supply). I tried all troubleshooting steps suggested by Apple but it doesn't work. I backed up my phone. I restored it several times. Even I re-installed iphone software. Also I restored it as a new iphone but doesn't work. What could be the problem and what are the availble solutions?
We can't know if there's a "fixture" because we can't examine your phone. But Apple can. Make a Genius Bar appointment and get your phone evaluated.
Maybe you are looking for
-
Error 7 occurred at Invoke Node in Dist read linkages.vi->Dist Cmp Settings to Disk Hier.vi->Build Application.vi???? Hi I do not understand how to resolve this nagging problem. I run the program in the development time and it all goes smoothly. Howe
-
Create a new costing variant or use a existing one
Dear Friends, Company XYZ does not use absorption cost. In Company Code 1000, Costing variant XY does not do any calculation because zero values are entered in acitivity type,costing sheet. For new company code 2000 &3000, Users want to enter values
-
Hi All, Trying to get my Flash slideshow to expand and fit the screen like www.francescobittichesu.com - is this a Flash or CSS issue? If CSS, how is it done? Thanks, Randy
-
Constant Resolving Host Issues
I have had a good service until recently but now Constant Resolving Host Issues. Pages slow to load making it difficult to use. HH3 Software version 4.7.5.1.83.8.94.1.37 (Type A) I have factory reset hub and tried opendns and Google DNS. Can anyon
-
How do you auto-size row height in a multi-column listbox with multiple lines?
I have a multi-column listbox containing four columns. The fourth column is for notes, which will be of arbitrary length; they can get to be very lengthy. I want the cells in the "notes" column to have a constant width. When the width of the text is