Generation of ASH report very slow

Hello,
I'm in 11203, and generation of ASH report is very slow.
AWR and ADDM reports are generated quickly.
To understand what happen, I check the wait event on the session that is executing ASH report, and I found that this session is waiting 99% with "controlfile sequential read".
My question is :
Is there any way to make the generation of ASH report quick ?
Why the generation need to access to the controlfile ?
Thank you a lot.

Hi, Keith.
I tried the pagination scheme "Row Ranges X to Y (with next and previous links)".
This caused the same problem - my page aborts with the error message:
"Internet Explorer cannot open the Intenet site https://oraweb.slac.stanford.edu/apex/slacprod/f?p=116:13:439623456781::NO:::
Operation aborted"
I even removed pagination altogether and still got the same error.
Futhermore, it is sporadic. At times I invoke the report with 500 rows and it
displays without problem. And then, 5 seconds later, I run the re-run the report (again asking to display 500 rows), and it aborts.
This report worked without error (it was "slow", but worked) two weeks ago. But now, it is failing. My gut feeling is that my problem lies with out Oracle
Application Server. I have the feeling that our DBA's have changed some
sort of configuration (a buffer, perhaps) that is causing my problem. Not sure
about this. I guess I'm reaching for straws at this point.
Thanks for your help. It is appreciated.
Elie

Similar Messages

User complaining report very slow?

Hi Gurus,
There is an interview question in EBS 11I:
“We have lot of issues in here, We facing some problem, the Discoverer users always complaining getting report very slow, sometimes it gives time-out error. What you think, how to resolve the problem?”
What are the answers they are looking from us?
Usually they are not satisfied with couple of answers, if we answered/verified each answer, the interviewer reply “No, …No…No……….. ”.
So tell me the answer what they are looking for. Please provide full possible scenarios.
Thanks,

Here is my 2 cent comments:
1. network issue
you can compare the discoverer reports with Oracle reports or Application module to identify this, usually this is not the case
2. tune the backend query
you can run the discovery report backend sql query in TOAD, if the query is very slow, then the query has performance issue, you can modify the join condition to improve the performance
3. add Parameter to Discoverer report
sometimes it is very difficult to modify the backend sql query, you can add parameter to discoverer report, when end user run the report based on the parameter, data can be quickly displayed. for example, currently report will retrieve all invoices for the company, if you add a year parameter, 2010, the report only retrieve the invoice of 2010.
4. change timeout time
timeout issue is a discoverer report setup issue, you can change the timeout time for example from 30 minutes to 60 minutes.
Thanks

Apex Report Very Slow And Aborts

Hello All.
I am using Apex 2.2.1 and have created a report region in which I retrieve upto 1500 rows in a report. The underlying report query is a function returning a SELECT statement in which search criteria are made part of the SELECT only if the user has actually typed-in any values for the search criteria fields on the Apex region.
I also have a "Display" drop down list populated by a hard-coded LOV. Users can select the number of rows desired in the report by choosing one of: "10", "20",
"50", "100", "200", "500", "1000", "5000" from the drop down.
I've set the following fields in the "report Section":
"Report Template" set to Template: 10. Standard
"Show NULL Values as" set to empty
"Pagination Scheme" set to Row Ranges 1-15 16-30 in select list (with pagination)
"Display Position" set to Top and Botton - Left
"Number Of Rows" set to empty
"Number Of Rows (Item)" set to P13_ROWS - this is my Display select list
"Maximum Row Count" set to 5000
"Strip HTML" set to YES
The underlying query is not calling any PLSQL functions. It is basically a SELECT
from a view which is itself a join between two tables. One of these tables has
1500 rows (each row has 25 columns) while the other has 251000 rows. I am
selecting one column from this second table.
Both tables have indexes on the columns used as search criteria and both tables
and their indexes have been analyzed via DBMS_STATS on Oracle 10gR2. The
PARALLEL option is NOT enabled on any of these tables or indexes.
When I run the underlying query (that results from my report function) in SQLPLUS,
it returns all 1500 rows in under 2 seconds.
When I run the report in Apex (with out any search criteria), the following occurs.
When the Display drop down is set to "10", the report returns 10 rows within 1 second.
When Display = "50", the time takes about 3 seconds.
When Display = "200", it takes 10 seconds.
When Display = "500", the report "sits there" for over 30 seconds and then
literally aborts. The only error message I get is that the "operation could not
be completed". There is no ORA error message. I checked with our DBA
and there is nothing in the Oracle server Alert Log. I appended &p_trace=YES
to my report url and ran the resulting trace file through TKPROF. All looks good.
What is causing this report to abort and to take so terribly slow?
It appears to be somehow associated with the "Display" drop down list value,
but I'm puzzled as to why. As mentioned, the report query in SQLPLUS runs
to completion in under 2 seconds.
Any help would be greatly appreciated.
Thank you.
Elie

Hi, Keith.
I tried the pagination scheme "Row Ranges X to Y (with next and previous links)".
This caused the same problem - my page aborts with the error message:
"Internet Explorer cannot open the Intenet site https://oraweb.slac.stanford.edu/apex/slacprod/f?p=116:13:439623456781::NO:::
Operation aborted"
I even removed pagination altogether and still got the same error.
Futhermore, it is sporadic. At times I invoke the report with 500 rows and it
displays without problem. And then, 5 seconds later, I run the re-run the report (again asking to display 500 rows), and it aborts.
This report worked without error (it was "slow", but worked) two weeks ago. But now, it is failing. My gut feeling is that my problem lies with out Oracle
Application Server. I have the feeling that our DBA's have changed some
sort of configuration (a buffer, perhaps) that is causing my problem. Not sure
about this. I guess I'm reaching for straws at this point.
Thanks for your help. It is appreciated.
Elie

Crystal Report Very Slow

I am developing a software using Vb.net 2008 and Cr 12.1.0.892
after loading my application the first report calling take 2 - 5 minutes to be viewed by the viewer to to be printed
next time if i ask the same report or another report it printed very fast 0.1 - 0.5 minutes
What is my problem
Please help

Hello,
When you run the report for the first time in the designer, how long does it take? It may just be loading files and retrieving data.
It may be searching for the printer the report was created with before loading the drivers for another printer that is available.
Open the report in Crystal Reports, go to File ->Page Setup check the No Printer option under Printer Options.
Save the report and run it again.
Elaine

SQL Query Report Very slow

Hi I have a sql query report that is taking very long to render.The query on sql developer comes back in less than a second.Any ideas on what could be wrong?

Hi
When posting code on the forum, put {noformat}{noformat} (with the curly brackets and the word code in lowercase) above and below your code like this...
{noformat}{noformat}
SELECT *
FROM emp
{noformat}{noformat}
It will then appear like this, preserving formatting...SELECT *
FROM emp
Next, how many rows are returned in total, it may be that you have SQL Developer set up to fetch only the first x number of rows?
Why have you put a CHOOSE hint in there?
Is it a classic report or an interactive report?
It looks like you're going over a database link, you really need to provide an explain plan (formatted as I have detailed above), a DRIVING_SITE hint may help you but it's impossible to know without seeing the plan...
Cheers
Ben

LMS3.2 Syslog reports very slow when send via email

Hello,
we have ~5000 devices in LMS3.2 and we have a problem with syslog reports.
When I create a "severity level summary report" for 5000 devices for the last 24hours and select as run type "immediate" it needs ~2-3 minutes. That's ok.
But when I create exactly the same report and select the run type "once" , it needs ~3 hours. ("Once" means that the report is send via email after it's finished). It happens with report type "pdf" and "csv".
What can be the problem ? Or is it usual ???
Regards
Hendrik

The scheduled reports can output a full list of messages where as the immediate reports output a limit of 10,000 records. If you have a lot of syslog messages, it can take a considerable amount of additional time to generate a full report.

Oracle 9i - my application report writer performing reports very slow..

Hi,
To tune the performance, where to find the pfile? location?
What kind of tuning should be done & how?
Please advice...
rgd
frz

Hi,
Use the Documentation forum to report broken links or general feedback about Oracle documentation.
For better/faster response, please post your question in the Database forum.
Database
http://forums.oracle.com/forums/category.jspa?categoryID=18
Regards,
Hussein

Report run very slow because some user accessing the same report

Dear All,
I group my table into 3 tablespace And some reports, accessing different tablespace (more than 1 table space). and these report will always be run by 5 user in the same time. and make it run very slow. Is it going to make the report very slow ? Please advice
Thanks in advance
Widhi

Hi,
i hope that may not be the actual problem..
if ur report processing includes relatively high
amount of calculations on tables..then the report
processing can be very slow...
In that case try to create a table to store ur calculations
temporarily and try to use that table in the report..

Why reports created in 8.5 and saved in XI.5 are very slow?

Hello,
Here is my problem :
I worked with Crystal Report 8.5 and my reports were speedy.
I saved a report in a new version (Crystal XI.5) and the report generation is very slow.
If i saved the same report (saved in 8.5) in the version XI (not the XI.5) the report is speedy.
If i saved the report from XI.5 to XI there is no change (report slow).
Have you ever seen this problem?
The database used is Advantage Database Server 8.1.0.26
Thanks for the help.
Mickael

Hi Mariusz,
It is expected that the reports will run a bit slow in the newer version as the entire report engine has undergone chnage after version 8.5.
With the new version, the database security has been enforced a lot more as compared to version 8.5. Along with this, the SQL generation process has also undergone change and the SQL which is now generated is much more optimized.
Also, there are a lot of new features in terms of formatting the report, which can cause the delay in showing you the first page of the report. It may not just be the database access that is taking time.
As suggested earlier, if you find the query generated in 8.5 was fetching records faster, you can surely create a command object in XI R2 to check if you get the same speed of data retrival.
Regards,
Abhishek Jain.

My MAC is running very slow and i am a complete novice and don't know what to do. i have had my Mac since 2008 and its probably in a mess. if you can help i would be grateful. EtreCheck version: 1.9.15 (52) Report generated 8 September 2014 09:09:26

My MAC runs very slow. Rainbow wheel every time i try to go somewhere. Im a complete MAC novice. Only really use it for iTunes and email. the odd document here and there. The odd spreadsheet. Was brought up on a PC. I would imagine my system is in mess. I think i downloaded that Mackeeper which i have just discovered was not a good idea. I found a thread about EtreCheck and it suggested i posted the report of my machine which i have done.I only have 2GB of space. Not sure how much i have left. My wife keeps putting photos on here like they are going out of fashion. Bought the machine in 2008 because everybody said you have a MAC. I've never really got to grips with it but at least it worked. Now it does not run very well at all. That spinning wheel is driving me mad. HELP please, never ever used a forum light this either so please go gentle on me. Cheers Paul
EtreCheck version: 1.9.15 (52)
Report generated 8 September 2014 09:09:26 BST
Hardware Information: ?
iMac (20-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information: ?
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1680 x 1050
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:31:45
Disk Information: ?
Hitachi HDP725032GLA380 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (117.84 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information: ?
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Bose Corporation Bose USB Audio
Apple Computer, Inc. IR Receiver
Gatekeeper: ?
Mac App Store and identified developers
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
[loaded] net.sourceforge.MonolingualHelper.plist Support
Launch Agents: ?
[running] com.trusteer.rapport.rapportd.plist Support
User Login Items: ?
iTunesHelper
Internet Plug-ins: ?
Google Earth Web Plug-in: Version: 5.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
AmazonMP3DownloaderPlugin101749: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
eMusicRemote: Version: (null) Support
eMusic: Version: Unknown
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Flip4Mac WMV Support
Trusteer Endpoint Protection Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
      2% iTunes
      2% WindowServer
      0% coreaudiod
      0% fontd
      0% rapportd
Top Processes by Memory: ?
178 MB Finder
133 MB com.apple.WebKit.WebContent
109 MB iTunes
92 MB Safari
63 MB com.apple.quicklook.satellite
Virtual Memory Information: ?
24 MB Free RAM
821 MB Active RAM
807 MB Inactive RAM
291 MB Wired RAM
338 MB Page-ins
680 KB Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Problem description: My Macbook air runs very slow since installed Yosemite a few days ago EtreCheck version: 2.0.6 (91) Report generated October 24, 2014 at 12:07:13 GMT 3 Hardware Information: ️ MacBook Air (13-inch, Mid 2012) (Verified) MacBoo

Problem description:
My Macbook air runs very slow since installed Yosemite a few days ago
EtreCheck version: 2.0.6 (91)
Report generated October 24, 2014 at 12:07:13 GMT+3
Hardware Information: ℹ️
MacBook Air (13-inch, Mid 2012) (Verified)
MacBook Air - model: MacBookAir5,2
1 2 GHz Intel Core i7 CPU: 2-core
8 GB RAM Not upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:15:57
Disk Information: ℹ️
APPLE SSD SM256E disk0 : (251 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 249.77 GB (28.85 GB free)
Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Access.app
[loaded] com.parallels.virtualsound (1.0.27 27 - SDK 10.6) Support
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.hypervisor (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.netbridge (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.usbconnect (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.vnic (9.0 24251.1052177) Support
/Library/Extensions
[not loaded] org.virtualbox.kext.VBoxDrv (4.2.4) Support
[not loaded] org.virtualbox.kext.VBoxNetAdp (4.2.4) Support
[not loaded] org.virtualbox.kext.VBoxNetFlt (4.2.4) Support
[not loaded] org.virtualbox.kext.VBoxUSB (4.2.4) Support
Startup Items: ℹ️
VirtualBox: Path: /Library/StartupItems/VirtualBox
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[invalid?] com.cisco.anyconnect.gui.plist Support
[invalid?] com.oracle.java.Java-Updater.plist Support
[running] com.parallels.mobile.prl_deskctl_agent.launchagent.plist Support
[invalid?] com.teamviewer.teamviewer.plist Support
[invalid?] com.teamviewer.teamviewer_desktop.plist Support
[loaded] org.macosforge.xquartz.startx.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.cisco.anyconnect.vpnagentd.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[invalid?] com.oracle.java.Helper-Tool.plist Support
[running] com.parallels.mobile.dispatcher.launchdaemon.plist Support
[loaded] com.parallels.mobile.kextloader.launchdaemon.plist Support
[loaded] com.teamviewer.Helper.plist Support
[invalid?] com.teamviewer.teamviewer_service.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist Support
[running] com.parallels.mobile.startgui.launchagent.plist Support
[not loaded] org.virtualbox.vboxwebsrv.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Moveslink2 Application (/Applications/Moveslink2.app)
Quicksilver Application (/Applications/Quicksilver.app)
Google Drive Application (/Applications/Google Drive.app)
Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
Dropbox UNKNOWN (missing value)
EvernoteHelper Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
Internet Plug-ins: ℹ️
SharePointBrowserPlugin: Version: 14.1.3 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 Support
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
User Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 Support
Safari Extensions: ℹ️
AdBlock
OpenIE
Facebook Photo Zoom
Translate
1-ClickWeather
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      7% WindowServer
      1% fontd
      1% Google Drive
      0% Microsoft Database Daemon
      0% AppleSpell
Top Processes by Memory: ℹ️
180 MB Google Drive
86 MB mds_stores
86 MB SyncServicesAgent
86 MB Google Chrome
86 MB Finder
Virtual Memory Information: ℹ️
2.25 GB Free RAM
2.84 GB Active RAM
2.56 GB Inactive RAM
936 MB Wired RAM
3.88 GB Page-ins
74 KB Page-outs

You have nearly run out of disk space. Either purchase a larger one or start cleaning out the one you have?

Report Viewer is very slow at first time

Hi,
We are facing very slow when loading the reports.For any search it is taking more time to load the reports.We are thinking issue is due to report viewer control and we are using report viewer control version 10.0.0.0.Could you please let us know how to resolve
this issue.
Thanks,
Vijay

How big id the query? How much memory does the server have? It is possible that an execution plan/data pages of the query was thrown from the cache and SQL Server needs to compile/read the data from disk again.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Report region runs very slow, but its sql runs fast

We have a page with a report region Type :SQL Query (plsq function body returning sql query) which runs very slow, pegging the tach on our db box for almost a minute before returning report rows. However, if we run the generated sql from sql plus, it returns all the rows in under 10 seconds with nary a blip on the box. Any idas how what could be causing this or how to debug?
Thanks,
Steve

OK, here is the bad boy, shortly after our code that returns the data.
declare
rc__ number;
simple_list__ owa_util.vc_arr;
complex_list__ owa_util.vc_arr;
begin
owa.init_cgi_env(:n__,:nm__,:v__);
htp.HTBUF_LEN := 63;
null;
null;
simple_list__(1) := 'sys.%';
simple_list__(2) := 'dbms\_%';
simple_list__(3) := 'utl\_%';
simple_list__(4) := 'owa\_%';
simple_list__(5) := 'owa.%';
simple_list__(6) := 'htp.%';
simple_list__(7) := 'htf.%';
simple_list__(8) := 'wpg_docload.%';
if ((owa_match.match_pattern(p_string =>
'f'
/* */,p_simple_pattern =>
simple_list__
,p_complex_pattern =>
complex_list__
,p_use_special_chars =>
false)))
then
rc__ := 2;
else
null;
null;
f(p=>:p);
if (wpg_docload.is_file_download) then
rc__ := 1;
wpg_docload.get_download_file(:doc_info);
null;
null;
null;
commit;
else
rc__ := 0;
null;
null;
null;
commit;
owa.get_page(:data__,:ndata__);
end if;
end if;
:rc__ := rc__;
end;
call count cpu elapsed disk query current rows
Parse 0 0.00 0.00 0 0 0 0
Execute 1 25.53 26.59 4492 20992 60 1
Fetch 0 0.00 0.00 0 0 0 0
total 1 25.53 26.59 4492 20992 60 1

Print preview using crystal report in SAP B1 is very slow.

Dear all,
I face another problem. Print preview using crystal report in SAP B1 is very slow. Although i have create a layout in AR invoice form and applying the print sequences (ie 4 prints). Does any one know how to print preview fast. Just like in PLD.
Thanks in advance
Kamlesh Naware

Hi,
Basically Crystal report run with SQL statement, I would suggest to do well performance tuning on SQL query / Store Procedure.
Structure your query in DBA manner that will make some how faster such as use ( inner join, less condition,...)..
also if it simple query then use Command in Crystal report rather store Procedure..that make some how Faster your report.
Thanks
Kevin
Edited by: Kevin Shah on May 27, 2011 4:21 PM

BI publisher report is very slow

I have OBIEE 11g installed Running BI publisher report is very slow. After doing a research seems like we have increase the JAVA heap size.
Can anyone help me how to increase this value. I do not see OC4j.cmd file in my BI install folder.
Thanks in advance

Did you try to change the setDomainEnv.cmd file in $MW_HOME/user_projects/domains/<Domain>/bin as follows:
set XMS_JROCKIT_64BIT=1024 --> to the new initial heap size
set XMX_JROCKIT_64BIT=2048 --> to the new maximum heap size
If this is helpful, please mark as correct or helpful

Generation of ASH report very slow

Similar Messages

Maybe you are looking for