Generation of Client summary report on WCS

Hi,
I have four WLCs running the IOS  version 7.0 at different locations. All these WLCs are joined to the WCS at one location.
I am trying to generate the client summary report. But i am not able to generate the report as per the requirements.
Please let me know is it possible to generate the client summary report for each controller.(i.e) The report providing the details of the users at each location. If so, Please let me know the procedure.

Hi,
Client summary cannot be narrowed down to Controller ip.. However, the "Client session report" will help you out in getting the report per Controller and this gives the client TX, RX and you can custpmize it as well!!
here is the link to do it..
http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0reps.html#wp1135765
lemme know if this answered ur question!!
Regards
Surendra

Similar Messages

  • NCS WIFI - Client Summary Report

    Quick question.
    I'm having a hard time making sense of all the information on this report.  For example, I ran the report for the last 7 days.  Any idea what they're basing the averages on? 
    For example on this report, "Average Number of Sessions" = 216.   Did we average 216 over the last 7 days when compared to the life of NCS? 
    Guess I'm just looking for more specifics as to what they're averaging to and I'm having trouble finding it in the PDF.
    Any help would be great.
    Thanks!
    Pete

    Anyone?
    Or should I reach out to Cisco directly?

  • WCS 6.0 client traffic reports

    I've looked around in the reports trying to find one that generates the Client Traffic report on the Home page under the Client tab. It is just a plain and simple graph that shows how much bandwidth has been used. I've only seen reports that show how much bandwidth a client has used or each individual wlc. I just need an overall bandwidth usage. Does anyone know how to create this graph via Reports or any other way?
    Thanks
    Brock

    How about this:
    Reports > Report Launch Pad > Client > Client Summary > Client Summary Report Details
    Customize the report and only include:
    Number of Sessions - Required
    Number of Users - Required
    Total Traffic (MB)
    Total Throughput (Mbps)

  • WCS reponds slow when generating the Client Association reports

    Hello,
    I have set a Wireless Network in of our client's corporate office - which consists of one WLC4404, 42 x 1131AG Access Points. WCS is used to mainly to monitor the AP reachability and Client Association and Deassociations from the WLAN.
    When i click on Run Now of the Client Association reports; the report is generated successfully. But when i try to view other pages such as Monitor>Network Summary - the WCS stops responding and it takes approximately 7 mins to display the Monitor>network Summary page. At this time i have observed that the server is reachable during the continous ping and the Server CPU utilization remains to 8% and Memory utilization remains to 1.56GB.
    Error Message: Error getting dataa from Server. Make sure you have connectivity and the Server is UP.
    Server used is a Standard Server HP Proliant ML110 with 1.86GHz Intel Xeon CPU and 2GB RAM. Operating System used is Win 2003 Server with SP1.
    Please can one help me solving this problem.
    Regards,
    Keshava Raju

    Sorry, i missed out to mention - WCS V4.1 is used for monitoring the WLAN.

  • Value too low on report client session on the WCS

    Hello,
    I'm trying to generate a report on the WCS through the menu:
    Reports > Report Launch Pad> Client >Client Sessions > Client Sessions Report Details
    Moreover for the report I customize it adding the Tx (bytes) and the Rx (bytes) column.
    My problem is that the result of the report has some very low values.
    For example:
    Session   Duration
    Avg. Session Throughput (Kbps)
    Protocol
    Policy Type
    Tx (bytes)
    Rx (bytes)
    24 min 59 sec  
    3.5  
    802.11n_2.4GHz  
    NOTAVAILABLE  
    190862
    472493
    30 min 9 sec  
    2.8  
    802.11n_2.4GHz  
    NOTAVAILABLE  
    189684
    451673
    26 min 39 sec  
    0.4  
    802.11n_2.4GHz  
    NOTAVAILABLE  
    51111
    37321
    451 kbytes for 30mn seems to be very low; someone has an idea about such low values ?
    The WCS version is 7.0.172.0
    thanks in advance
    Regards
    David K.

    Thanks for the suggestion JKramer. I should have been more clear about having adjusted all volumes up in the settings screen. Assuming all sound options are located within the "Settings --> Sound & Display" screen, then yes, I have tried changing them. I have also tried changing the option to "use incoming call volume for notifications" under the "ringer volume" settings, after reading that someone had success in improving volume that way.
    This issue is not a problem all of the time. It is only an issue when there is an elevated level of background noise, such as driving on the freeway, or having music or a movie playing in the room.
    The phone is otherwise excellent! I live and commute in areas of very spotty reception (with all cell providers), and this phone will keep calls and not even have voices garble where my past two phones have consistently dropped calls in at least five problem locations. So far, everything else about it seems to work great!
    Maybe some of these phones don't have this issue. Or, maybe the people who say they don't encounter the problem are lucky enough to live in relatively quite environments most of the time. In a quiet house or office, it is certainly loud enough. It just needs to have the option for increased volume when in noisy places. The issue is that its "max volume" settings are not as loud as with other phones.
    Searching for something like "Droid X volume" will indeed show many people experiencing these same problems on various forums...

  • Can I run a Unique Clients and Users Summary report customized by both floor area and SSID?

    In Cisco Prime, can I run a Unique Clients and Users Summary report customized by both floor area and SSID?

    Allright guys. I appreciate the quick responses. I've worked a lot in CR however i am not understanding the solution so I'd appreciate if you can dumb it down for me. If i understand it correctly you guys are suggesting to make a formula, that either return my group by string (which is a formula in my report) or the Quantity. I tried writing a formula like this
    if ({@param} = 1 then
    GroupName ({@GroupBy})
    else
    {NetPNL.GrossAfterAdj}
    but it seems like CR does not allow you to return 2 different data types. Even if it had worked i would not know what to do from there. Can anyone please dumb it down for me. To make my situation more clear below is an example of how my data is..
    MN 100
    MN 200
    MN 50
    CA 300
    CA 500
    when the data shows in the report, its grouped by state, so it comes out like
    MN 350
    CA 800
    I want the users to decide whether they want it sorted by state  (ascending)
    CA 800
    MN 350
    or Total quantity (asc)
    MN 350
    CA 800

  • Cisco WCS client count report - client count figures cumulative or concurrent?

    Hi, 
    Just want to clarify the "assoicated client count" and "Authenticated client count" values from WCS Client count report concurrent or cumculative?
    The client count report in excel format:
    Total Client Count
    Total Count
    Event Time
    Associated Client Count
    Authenticated Client Count
    total
    Sun Oct 12 23:59:59 HKT 2014
    3992
    3854
    total
    Mon Oct 13 23:59:59 HKT 2014
    7838
    7289
    total
    Tue Oct 14 23:59:59 HKT 2014
    7724
    7124
    total
    Wed Oct 15 23:59:59 HKT 2014
    6849
    6336
    total
    Thu Oct 16 23:59:59 HKT 2014
    5908
    5530
    total
    Fri Oct 17 23:59:59 HKT 2014
    1240
    1228
    total
    Sat Oct 18 23:59:59 HKT 2014
    1040
    1031
    Client Count
    AP Name
    Base Radio MAC
    Event Time
    Associated Client Count
    Authenticated Client Count
    AP-EDHB-018
    08:1f:f3:23:23:10
    Mon Oct 13 23:59:59 HKT 2014
    160
    157
    AP-EDHB-018
    08:1f:f3:23:23:10
    Tue Oct 14 23:59:59 HKT 2014
    121
    120
    AP-EDHB-018
    08:1f:f3:23:23:10
    Wed Oct 15 23:59:59 HKT 2014
    95
    95
    AP-EDHB-018
    08:1f:f3:23:23:10
    Thu Oct 16 23:59:59 HKT 2014
    94
    94
    AP-EDHB-018
    08:1f:f3:23:23:10
    Fri Oct 17 23:59:59 HKT 2014
    6
    6
    AP-EDHB-018
    08:1f:f3:23:23:10
    Sat Oct 18 23:59:59 HKT 2014
    3
    3
    AP-EDHB-019
    08:1f:f3:23:24:30
    Sun Oct 12 23:59:59 HKT 2014
    38
    38
    AP-EDHB-019
    08:1f:f3:23:24:30
    Mon Oct 13 23:59:59 HKT 2014
    113
    110
    AP-EDHB-019
    08:1f:f3:23:24:30
    Tue Oct 14 23:59:59 HKT 2014
    110
    109
    AP-EDHB-018 have 160 assoicated client count reported.  Really mean there were 160 wireless client assoicated at a moment or there were a totally 160 connected at that day?
    Any idea?
    Dick 

    Hi Kayle,
    Thanks for the response.  I think you are talking about this in the above.
    Reports > Report Launch Pad > Client > Client Count > Client Count Report Details
    then
    AP by Floor Area  and select "All Campus", "All Building", "All Floor"
    By doing this I get 700+ APs daily client count in graphical (pdf) view and need to go through manually each graph to identify the top 50, top 100 in a given day.
    Is it possible to only filter the top 50, 100 APs ?
    I would like see my daily report gives something similar to the below
    AP Name    Max Client Count
    AP01               96
    AP02               83
    AP50               20
    Would it possible to get something like this from WCS reports ?
    Thanks
    Rasika

  • I dont have data in "Client status summary" report for servers in server collection, but get data from our Windows 7?

    Hi,
    I dont have data in "Client status summary" report for servers in server collection, but get data from our Windows 7?
    So and idea of way I dont get data from or servers? Missing client setting for servers?
    /SaiTech

    Hi,
    I do see the server in Server collections in "Monitoring--Client Status--Client Activity" but not in reports like "Clients with failed client check details" i get "No Data Available"?
    /SaiTech

  • Summary Report For Store Activities.

    Dear Gurus..
    I need to make a summary report on Store Activities.
    Having following Fields.
    Material number |  Material Description |  Material Unit | Opening Balance | Quantity |  Receipts | Quantity | Issues | Quantity | Closing Balance | Quantity |
    Please guide me..
    Which tables will be required.

    Dear Sir.
    I have uploaded a PDF file for your reference .
    this is the out put my client want .
    [Summary of Store Activities.|http://www.geocities.com/saadnisarahmedkhatib/ABAP/File0003.PDF]
    Regards
    Saad Nisar

  • Custom Template for Third Party Balance Summary Report(Java type executable

    Hi Al,l we have a requirment to have a layout with some of the fields from
    Third Party Balance Summary Report( Which is a Java type executable and
    Data definition has Data Template attached(.xml)).
    I tried in below way.
    Coppied the Third Party Balance Summary Report program with same application and parameters
    with. Then defined a Datadefinition with my concurrent prog short name
    attached the same standard .xml file(Not sure what it is) and developed a custom template with
    a custom rtf(excel output type), and submitted the program
    the output is generated in excel but my custom .rtf layout is not getting applied
    rather it is showing same layout as in standard.
    Some thing I am missing here or else it is not the way of changing the
    template.
    If any one know how to do this please let me know.
    My client want only some files from the standard report(no need of new fileds)
    with output type xls.
    Thanks in Advance.
    The same content is posted in Custom Template for Third Party Balance Summary Report(Java type executable sorry for duplicating the thread, just for increase the visibility for my issue I did this.

    I gave up on using a different font or figuring out if I could use Times New Roman's built-in fractions visible in Font Book (as unicodes) and did a work-around based on Michael Wasley's tips in this discussion.
    https://discussions.apple.com/message/11622842#11622842
    I adapted it however and think it looks a little better.
    Font: Times New Roman 12 point
    I used the fraction bar in 12-point (Shift-Option-1) for automatic kerning.
    For the numerator, I changed the font style to superior (12-point).
    For the denominator, I changed the font style to subscript (Shift-Command-hyphen) and reduced the font size to half, or 6-point using the short-cut Shift-Command-<.
    When the fractions occured in my footnotes (9-point), I used 4-point in the denominator; 10- and 11-point, I used 5-point in the denominator. This seemed to produce the best result when printing.
    Thank you, Michael.
    -Dottie

  • Summary Report of Apps account usage

    I have a client requirement wherein by EOD everyday I need to submit a kind of summary report of the Apps account usage in our PROD/DEV/UAT ERP databases.
    The report should contain information like how many times the Apps account has been used by users( technical support team) to log into the databases, and also it should the client machine IP address from where the connections were made to the databases using Apps account (i.e login as apps/<appspwd> in the database). The report format be approximately as given below,
    Client Machine IP No.of Login (Apps account)
    192.168.0.1 1
    192.168.0.2 4
    192.168.0.3 2
    etc...
    The above information states that the client machine IP 192.168.0.1 has logged into the database using apps user credentials once, similarly client machine with IP 192.168.0.2 has used the apps account to log into the database 4 times and so on...
    I am not sure if any such report can be created and in the specified format.
    Need help and suggestions regarding the same.
    Regards,
    Rupdipt

    Pl post details of OS, database and EBS versions.
    There is no seeded script or report that will provide the information you need. You will need to create this report, along with an auditing framework that will capture the information you need in the report.
    Best practice is that the APPS password in UAT and PROD instances should only be know to the DBA team and no one else, and should be changed frequently.
    Re: APPS Password
    HTH
    Srini

  • Reporting in WCS 6.0.132

    I recently upgraded from WCS 5.2 to 6.0. I have a number of Client Count reports set up, which are run weekly to generate PDF graphs of usage on all APs in each building. Since the conversion, all of them fail with the message "Failed to run report". I've tried deleting and re-defining them, but get the same result. Running them manually makes no difference. Has anyone seen anything similar? Is there anything I can do, or is reporting just broken in 6.0? The message is singularly unhelpful
    Regards
    Max Caines
    University of Wolverhampton

    Have you used a beta version or earlier pre release version?
    You have an issue that is related some how to entries that were in beta codes of WCS.
    A few things to try, first make a backup of your db.
    Then, go on the CLI, bin folder of WCS and after run:
    1.StopWCS
    2.dbamin checkschema
    3.StartWCS
    See if this helps.
    I dont want to push you for opening a TAC case and would like to avoid it, but if you are concerned about keeping the same db and not loose any data, we need a TAC case to be opened. That will involve that you upload me your database so we can try to fix this manually.
    If you dont care about the DB and you are ok to rebuild it then from the CLI
    1. StopWCS
    2. dbadmin reinitdb
    3. StartWCS
    Reconfigure your WCS, the issue will be gone.
    If you decide that you can not loose the db and the previous steps did not help, open a TAC SR between now and the next couple of hours and ask for lavramov, I can help you out.

  • Order summary report

    Hi Guru,
    My clients want to see below fields in Order summary report, is there any standard report to meet below requirement:
    Debtors' Name (standard Report)
    Date Received (Standard Report)
    Date Deliver
    No of cartons sent
    Weight of Carton.
    Please advise, if any report is meeting above requirement, otherwise i will go for customzation.
    Regards
    AK

    Hi,
    No stadard report can fulfill your requirement.
    I think you need to go for customization.
    Thanks
    -Arif.

  • Summary Report: Can Smallest Tile Display Label?

    A client has requested to not "do the math"...
    Even though the hover state shows the value, can the display of labels be required?
    Please see the linked pic.
    Thanks for any input.
    Tim

    Hi Tim,
    One possible work-around would be to increase the amount of available space for the report tile. This can be done by following these steps:
    1. Switch to the "Summary Report" tab
    2. Click the File > Page Setup... menu item
    3. Increase the available space by either increasing the page width or changing the page orientation from portrait to landscape
    The screenshot below shows the before/after of an example report tile.
    Regards,
    Brian

  • Stock summary report monthwise

    hi all,
    As per client requirement i need stock summary report.
    The closing stock value of report should tally with mc.9 tcode closing stock value for that particular month.
    I have one stock report, but its not the purpose of mc.9
    If any body having which matches above requirement
    plz send the code.
    Its very urgent..
    Thanks in adv
    srividya

    Hi,
    As said earlier, current stock, i.e current month stock should be available in MBEW
    where as MBEWH should definitely contain the value of the previous months for any material/plant combination, as its a std sap table and the stock field keeps get added/reduced during any goods receipt/reversal/invoice etc.
    Are you checking this data in Production client or any other client.
    Ther ould be a diffrence between the live data in production system compared to other systems, as refresh of data happends only at regular intervals.
    Hope this helps.
    Regards,
    JLN

Maybe you are looking for