Generation of Configuration document through Sol Man

Dear Friends,
We are using Solution Manager for our R/3 implementation. In realization phase, we are capturing all transports in BC sets through Sol Man. Via Sol Man, i am executing t.code SCPR3 (Maintain BC set), after capturing all the confugurations in BC set, i am maintaining configuration related details in the same BC set, as below.
In SCPR3 t.code, in top menu,
Edit-----Add documentation.
Here i am maintaining all configuration related details. And saving as "Raw version".
The same way, for all the BC sets, i am maintaing the configuration related details within the same BC set itself.
My client requirement is:
1. Now i am calling all the BC set in Sol Man (t.code SOLAR02, "Configuration" tab, under "type" coloum, i am selecting, "BC set".
2. Now, if i generate "Configuration Guide", the system has to automatically pick the the configuration details, what i have maintained in the BC set (as Add documentation).
How to do this?
regards
Senthil

Dear Friends,
In SCPR3 t.code, in top menu,
Edit-----Add documentation. can we make this "Add documentation" to be mandatory? So without entering the details, one should not possible to SAVE the BC set.
Can we make any settings for this?
Thanks
Senthil

Similar Messages

R/3 implementation through Sol Man

Dear friends,
We are doing R/3 implementation through Sol Man 4.0.
We have created the project in Sol Man. For all the consultants the direct access to R/3 Dev is blocked. They have to go to R/3 Dev via sol man only.
In SOLAR02 t.code, under configuration tab, we are requesting the consultants to capture the configurations under the type "IMG Object" & by giving the proper logical component, it is taking to R/3 Dev client. Then the consultants choosing the relevant IMG nodes. The same IMG nodes are getting saved in Sol Man with IMG object.
Now for example, for define order type dependent parameters, the system is capturing the IMG Object "PPPI_PO_212" .
But the consultants know very well the relavent t.code for doing the above same configuration is OPL8.
Like above, by knowing the IMG Object, can we find the t.code relevant for that IMG object?
Regards
Senthil

Hello!
In your Dev client,
Come to Display IMG screen thro' SPRO
From the menu choose,
Additional information>Additional information>Display key>IMG activity
Now the additional information column will give you the IMG object name followed by the transaction. Usually the last three/four characters.
Hope this helps.
Kathir

Error while copy document in Sol Man

Dear friends,
I am working in Sol Man 4.0.
I have loaded the doc 'ABC" in SOLAR02. Now i want to copy the document in RMAMAIN using the option
"Assign Document" ---L> as a copy, i am getting the following error
"FOLDER CLASS IWB4FOLDER is NOT valid for objects of info object class SOLARGEN"
Please guide to solve this..
Regards
Kumar

Also have a look at the following notes:-
=> Note 26050 - FIPP:Posting not poss. (SAPMF05A,0700,batch input)
=> Note 800177 - FB01: No batch input data for SAPMF05A 0700
thanks
G. Lakshmipathi

Connecting satellite system through Sol Man

Dear friends,
I am working on Sol Man 4.0 SP 12.
I have properly set the T-RFC roles to users in both satellite system as well as in Sol Man system.
Now i want to execute the transaction MM01 (creation of material master) from Sol Man. If i execute the transaction, i am getting the message that
"The new session will be created in SD1 system".
The SD1 system is my R/3 dev system. But the new session is not at all getting displayed.
I could not find the reason. If there is a problem in RFC, system will clearly tell the message.
Could anyone suggest me reason for this kind of system behaviour?
Regards
Senthil

Dear Senthil,
Have you defined any user for the RFC's specially the Trusted RFC ? If yes is it an Dialog user or an communication user ?
Also does the userid in Satellite system have the authorization to execute MM01 ?
Regards
Amit

Unable to create EWA in SOL MAN

Hi Experts,
I configured EWA for SOL MAN....
I successfully generating alerts for satellite systems but not for own SOL MAN
Alert running successfully with PMS and Refresh sessins with out error
my RTCCTOOL not showing any errors/requiremwents...
please suggest...
version : SAP SOLMAN EHP1
Regards,
Siva.
Edited by: skreddy555 on Jan 30, 2011 1:38 PM

Hello,
So you are saying you can generate EWA reports for Satellite systems but not Solman itself?
That really doesn't give any details to the problem, as what has occured and what has not.
Is the EWA scheduled? Have you run solman_setup on Solution Manager as the managed system?
If you want to generate an EWA for Soman itself, then you also need to treat it like a managed system.
IWhat it the status in solman_ewa_adm? Is it active? If it is ther eand active it should be scheduled and then there should
be something in DSWP. Is the icon a bottle? 2 Bottles? A Red Flag? A Grey Diamond, a Document?
Is the maintenace package task scheduled and running with no errors? Are you using the SM_<SID>CLNT<nnn>_BACK RFC or the NONE RFC in SDCN as the back RFC and have you tested them?
Is SM:EXEC SERVICES finishing or cancelling? If it is cancelling is there a dump?
These are some things to check. But it is hard to even gues what the problem is because you have been so vague.
If you can describe what you have done to configure, what is working, and what seems not to be working, this would help to get an idea where & what the problem may be. But you generally need to treat the Solution Manager exactly the same as a satellite system when setting it up for EWA reporting. This make is both a managed and the managing system. So you can't skip any steps just because its the managing system. If you describe the problem in more detail, and if any part in the process is working, and what is not, that is helpful.
You should see it schedulied in DWSP. If not, then it's not scheduled. But the status in DSWP can tell a lot. A Red Flag means a problem with SDCCN tasks or the RFC, a Grey Diamond means important data is misisng and the report can't be generated, so that is a probelm is data collection, two flasks indicates sm:exec services has not run or is failing.
So you really need to give more information....unless I have already touch upon your problem, I don't know how helpful people can be but toss out general information.
I'd like to help more if you can give more details to what you see and don't see that you should.
Regards,
Paul

How can i send a document through my email with a ipod touch 2nd generation?

How can i send a document through my email with a ipod touch 2nd generation?

https://itunes.apple.com/us/app/id314894105?mt=8
https://itunes.apple.com/us/app/id306273816?mt=8
They have some limitations though. They have paid versions that remove those limitations

Problem in moving project from Old Sol Man 3.1 to New Sol Man 4.0

Hi All,
I am trying to move a project from solution manager 3.1 version to a new solution manager 4.0 version. I followed the below steps:
1.Slected and transported the project using solar_project_admin tcode and created the transort requests in the old sol man version 3.1.
2.Copied the cofile and datafiles from old sol man and kept in trans directory of new Sol man 4.0 version at OS level.
3.Imported the requests into the new Sol Manager 4.0 successfully
4.When I tried to open the imported project it told me to run the "solman_log_comp_mgr program" to convert the project to the central logical components. I just did it and it went well.
I can see the project and do see the document types but no document names and getting all sorts of error messages when I tried to open these documents. Also I dont see the logical components under system landscape.
Before importing, I just have configured servers/hosts, databses and all the components of system landscapes in the new solution manager.
I request you to help me solve this issue. I also would like to know whether i followed proper procedures that i listed above? If not please suggest what procedures I should have follwed.
Thanks in advance.
Aravind Serikar

Hi Aravind,
to transport a project from 3.1 to 4.0 I would not use SOLAR_PROJECT_ADMIN to "migrate" a project. There for we developed SOLAR_MIGRATION there you can transport system landscape info, also you can transport projects. You should only transport system landscape info if in 4.0 SMSY is EMPTY. To transport projects you have only to specify your project and define a local folder. In this folder we store a few important information. Then all information will be collected in a batch job and automatically exported. Then you have to copy the data file and the cofile into the new trans folder. BUT do NOT forget the i-file. In the folder cofiles you will find a i-file, because we export knowledge warehouse content. This file is important, if you forget it you will get a return code 8. You do NOT have to add the files in the import buffer, we will do this automatically. To import the project, you have to call SOLAR_MIGRATION in SolMan 4.0 there you have to select import, then specify the folder with the few important information. We upload the info and start the import. That is it
Regards,
uDo

Sol Man 4.0 and Test Director 8.0

Hi,
We currently run Mercury's Test Director 8.0 (SP2) where we store all of our manual and automated test scripts.
We are also planning to use our Solution Manager 4.0 to create our project, our blueprint/configuration and from there on link our test cases to the process steps.
I've read that there is integration between Test Director.
What I'm looking for is that since all of our test scripts are stored in Test Director, is it possible to link those individual scripts to each process steps.
In the Test Case tab of Sol Man, there is the Test Case Type column with several options. If I select "Test document" and use "Web Link" to link to the test script, it would only bring me to the log-on page of Test Director upon which I would need to log-on and then search the Test lab for my script.
Just wondering if there's a way to accomplish (without downloading all of our scripts from Test Director and then uploading them to Sol Man.
Any thoughts would be appreciated.
Thanks
Danielle

Daniella,
Please take a look at this thread.This might help you how to integrate Sol Mngr with Test Director.
Solution Manager integration with Mercury product
Thanks
Sudhan Shan

How do I access CProjects in Sol Man

Hi all
I've been looking through the SAP Project management tools and have started familiarising myself with SOLAR01 / 02, RMMAIN, etc but have found through digging in Google that SAP has another set of project management tools called CProjects. (By all accounts you can do Gantt charts, resource scheduling and all that Jazz?)
I think it is installed in our Sol Man solution as I can give my user the Auths required for access to CProjects inc SAP_CPR_PROJECT_ADMINISTRATOR etc.
However I cannot yet find out how to access the CProject menu's etc (if they exist as such). Can you give me some help here as to what these menu items are and how do I confirm that CProjects is actually fully installed.
Also are there any other SAP PM Tools my system should contain?
Thanks

Hi Mapp,
The features of Solman and cProjects complement each other to provide a complete toolset for effective project management.Solman project can be extended to cProjects to manage project phases and tasks.
To access cProjects via Solman, navigate to Environment -> Project IMG -> Select 'Logical Component' cProjects Suite or use transaction SOLAR02 and navigate to Solutions/Applications -> mySAP PLM -> Configuration Structures -> SAP cProject Suite 4.5 -> Basic Settings for cProjects.
Hope this helps.
Regards,
Pradeepkumar Haragoldavar

CHARM - diff between packages in file system vs sol man

Hi Experts,
We use CHARM to transport our Portal packages (e.g. EPA, KMC packages). My understanding is that these packages can be downloaded from the file system or through STMS in Solution manager. However, we noticed that for the same transport requests, it contains different packages in file system than in solution manager, which is perplexing. E.g. PD3K90009X has 1 EPA file in Solution manager while we see 3 different EPA files in file system. 1 of the EPA file matches the 1 seen in solution manager, the other 2 we found, belong to other transport requests. Any idea why for the same transport, it would contain different packages in the file system than solution manager?
Thanks,
ZM

The problem was resolved and it was largely due to missing prerequisites although the system met the required SPS17 requirement. The lesson learned here is that for newly built Sol Man 700 systems, it's best to do the basic configurations to get Maintenance Optimizer going so it can be used to select and download EHP1 packages. The traditional SMP SWDC packages selector via identification of source and target releases didn't give the complete prerequisite packages for EHP1 SAINT import.
Cheers
Ben Trinh

Sol Man Test Plan protection

Dear All,
I am workig with Sol Man 4.0. I have created the test plan in STWB_2.
Now in "Attributes" option, in top menu , under "Test Plan" option, i am protecting the test plan.
Now, i want control, except me, no one should able to "Remove protection".
How to control this?
Which authorization object controls this?
I have given only "DISPLAY" authorization for test plan. But still the user can do "remove the protection"
Please help me on this?
Thanks
Kumar

Hi Senthil,
Your question is a valid one, but I am not sure how many may have explored these nuanced requirements so far, in their projects.
So, if you have a Sandbox SolMan environment you can perhaps try to enact the following and if it works you can try in the productive environment.
I am not sure if there exists a separate authorisation to prevent deletion, but there does seem to exist a functionality that prevents 'display' to users unless the document belongs to certain 'status' that you predefine.
Authorization for the activity READ(33) in the authorization object S_IWB, is checked if the role SAP_SOL_RE_COMP is used.
From SAP help in SPRO, please read more on the section:
SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration -> Scenario-Specific Settings -> Cross-Scenario Settings -> Status for documents
You may also want to explore:
SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration -> Scenario-Specific Settings -> Cross-Scenario Settings -> Document Management -> Authorizations.
I could not interpret the latter for a practical use. It needs more time being spent.
If you are ever able to crack this, please let me know at [email protected]
Thanks and regards,
Srini

Errors while trying to configure alerts in Sol.Manager

Cannot find SAP documents detailing steps on how to configure alerts in
Sol.Manager, that will email an alert to us when a batch job fails in
our two Production systems.

I don't think there is one document that will explain this.
Basically, you need to configure your sendmail through transaction SCOT (note 455140) and then you need to setup your autoreactions using CCMS_OnAlert_Email or CCMS_OnAlert_Email_V2 to send the emails based on a CCMS alert.
Lee

Configuration documents for Training and event management &apprisals?

hello xperts
can anyone forward me configuration documents for treaining and event management and apprisal? to [email protected]

Thanks for your suggestions.
i can't go through new appraisal model with catalog & template, because client is not having ESS,MSS. appraisal has to done in the ECC only.
Done the customization like this :
created scales
created appraisal model and assign the scales
for appraisal, Employee can do from APPCREATE transaction rate his own ratings and save.
Now Appraiser (Manager) from APPCHANGE complete the appraisal.
now my requirement is (1) after saving the APPCREATE by the employee, notification has to go to his reporting manager only. (2) Manager can do review/change and complete the process to his Employees only (who are reporting to him)
how can i do this, standard functionality is there or i have to go for ABAP coding ? if ABAP coding what i have to ask them to do.
Please help in this requirement.
Thanks and Best Regards,
Praneeth kumar

SAP Sol Man 4.0 Config guide

Can some one tell me where i can find SAP Solution Manager 4.0 config guide?
Also can some one send me any material for Sol Man certification exam.
will reward points
thanks
PR

Hi PR,
please have a look at: www.service.sap.com/instguides -> SAP Components -> SAP Solution Manager -> Release 4.0 for the Configuration Guide and other related Guides such as the Master Guide etc... Here you will also find links to other material.
For configuring the Solution Manager you need to go to transaction SPRO in your SolMan. Here you'll find the configuration of the Basic Setting, whcih you need to get it running and the scenariospecific settings, which are relevant for the scenarios.
Best regards,
Annett

Sol Man 4.0 and Reporting out to BW

We have upgraded to Sol Man 4.0 and need to report the Change Request info, Change Document info and Transports log using an external BW box. In researching this forum, I have learned that we can export data out by activating the CRM business content. I need more guidance as to what DataSources to use. So far we have activated and found data in 0CRM_SRV_PROCESS_H and 0CRM_SALES_ACT_1, but I am missing information such as Change Advisory Board, Subject, External Reference, Decision Date, and Implementation date to name a few. Can anyone help? Is this documented ANYWHERE?? Thank you.
Charis Davenport
Project Management Specialist
The Walt Disney Company

Daniella,
Please take a look at this thread.This might help you how to integrate Sol Mngr with Test Director.
Solution Manager integration with Mercury product
Thanks
Sudhan Shan

Generation of Configuration document through Sol Man

Similar Messages

Maybe you are looking for