Generation of .ecs file and .xsd file

Hi,
I am working on the Acme-GlobalChips tutorial Query using File 1.0 protocol.
I have few question on that.
While creating the Business actions and Trading partner IN B2B we use two 850.ecs and 850.xsd.Can these be used for all the trading partners or they are partner specific.If not then do we develop it using Document Editor.
Moreover if after we create the .ecs using the tool can we generate the .xsd file using same tool.
I have this doubt because I used the .ecs file provide with the tutorial and used EDI file provide by some other partner it worked.I mean I was able to generate the EDI-Xml as payload in reports section of B2B.
Can some help me on this.
Regards
Lalit

Hi Lalit,
1. Yes. Different Trading partners can use the same Business action. However, you can also override the .ecs file and .xsd file as per your requirement.
2. We can also generate .xsd files using the Document editor.
Regards,
Dheeraj

Similar Messages

  • XML and XSD file to an internal table

    I had read a lot of thread  but i don't understand how to deal with xml/xsd in R3.
    I need someone that have a definite example for this escenary please.
    With OPEN DATASET took from the server XML and XSD file, and put it in two internal tables type string.
    What functions or method have to use, and how to use them, to charge the XML file in an internal table?
    This is an example of XML and XDS:
    XML
    AND CONTINUE
    Best Regards,

    I just tried to interpret your question, it was not obvious what you wanted.
    I guess what you mean is that you have defined (statically) a deep structure, and you want to decode the XML into it. That is called a transformation (transaction STRANS, statement CALL TRANSFORMATION). You have the choice between 2 transformation languages: XSLT and ST. Of course, it depends what release you are running.
    I advise you to play first with the ID transformation, to convert an ABAP deep structured data object into XML, so that you see what XML is generated, this one is called asXML. If you create your own transformation, when you call it, it will first convert automatically the data object to asXML, and the transformation has to do the rest of the job.
    You can do the opposite, i.e. converting from XML to a data object, according to the same principle (intermediate asXML).
    Well, there are lots of things to say, I recommend you to read articles and documentation on XSLT and ST (search on SDN).
    About XSD, it won't help (and I did never see any possibility to use it) to decode the XML, as you must anyway define the target data object statically (and there's no tool to generate the ABAP code of the data object definition from the XSD).
    Note that you may also use iXML libraries to parse the XML.
    Please tell us more.
    BR
    Sandra

  • Best practice for how to access a set of wsdl and xsd files

    I've recently beeing poking around with the Oracle ESB, which requires a bunch of wsdl and xsd files from HOME/bpel/system/xmllib. What is the best practice for including these files in a BPEL project? It seems like a bad idea to copy all these files into every project that uses the ESB, especially if there are quite a few consumers of the bus. Is there a way I can reference this directory from the project so that the files can just stay in a common place for all the projects that use them?
    Bret

    Hi,
    I created a project (JDeveloper) with local xsd-files and tried to delete and recreate them in the structure pane with references to a version on the application server. After reopening the project I deployed it successfully to the bpel server. The process is working fine, but in the structure pane there is no information about any of the xsds anymore and the payload in the variables there is an exception (problem building schema).
    How does bpel know where to look for the xsd-files and how does the mapping still work?
    This cannot be the way to do it correctly. Do I have a chance to rework an existing project or do I have to rebuild it from scratch in order to have all the references right?
    Thanks for any clue.
    Bette

  • External dependency on remote dtd and xsd files

    The question bugs me for years, please help.
    Should we download external dtd and xsd files declared for web.xml and faces-config.xml and pack them in the war files to eliminate the external dependency.
    e.g.
    http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd
    http://java.sun.com/dtd/web-facesconfig_1_0.dtd
    Thanks

    Hi Srikanth,
    Have you done this?
    SAP HELP
    <i>You want to import an XSD document myMessage to the Integration Repository; this document references three other XSD documents myStr1, myStr2, and myStr3 by using the <include> statement. One option is to first import myMessage. The External References tab page then shows that three documents are referenced and that these documents are not yet in the Integration Repository.  Next, create further external definitions for myStr1, myStr2, and myStr3 in the same namespace and specify the source for each of these documents. If the source is not contained in the document itself, you will find it in the referencing document. If you refresh the display of the external definition for myMessage, the External References tab page shows that the documents have been found in the Integration Repository. You can then navigate to the other referenced external definitions in the Integration Repository by double clicking.</i>
    Also, try activating just in case you haven't.
    Regards
    Vijaya

  • How to read and XSD file in java prospective in NWDS

    Hi !!
    anybody can help me that
    how to read and XSD file in java prospective in Netweaver developer Studio
    Regards
    Abhishek Agrahari

    I guess you can make it more clear...

  • Where to place xml and xsd files in Tomcat

    Hi,
    This is rather a stupid question but I am totally new to JAXP technology and i wanted to know is there a specific location where i need to store the xml and xsd files i created?. And how would i mention the target name space for the xsd file? I am usinf eclipse IDE and Tomcat 5.5.
    Thanks for the patiance.

    Is the question so stupid that no one even want to try to reply?

  • PI does not combine .wsdl file with .xsd files.

    Hi,
    I imported .wsdl file with necessary .xsd files in PI system (7.1).
    PI does not find fields in .wsdl already necessary .xsd files imported with .wsdl file.
    Is there anyone to help me to solve problem with test it in PI system.
    I send .wsdl file and necessary .xsd files as attachment his mail address.
    Thanks.

    Did you try opening the wsdl file in some XML tool...if there is problem in referring the XSD then it will be visible in the tool itself.....even I am working on PI7.1 and some of the WSDLs are referring XSDs...and i had no problem in using them.....dont know what is failing in your case
    Do you want me to send .wsdl and .xsd files zipped into your mail box
    instead you can post your wsdl file and the corresponding XSD here in SDN....even a dummy structure would do....we are not allowed to do personal email comunication
    Regards,
    Abhishek.

  • Hi all,  need data file and co file after single transport in 6.4 or 6.7

    hi all
    following is the requirement
    To process/compile the attached programs (given below) in 6.4/7 Kernel (SAP 6.4 version  or 6.7 version )and send a single transport (Data File and Co File).
    these data file and co file are flat files.
    CAN ANYONE HELP ME GETTING THESE FLAT FILES.   I need these flat files urgently.
    WHAT U HAVE TO DO IS:
    IF U HAVE 6.4 OR 6.7 VERSION, JUST TRANSPORT FOLLOWING 10 PROGRAMS IN SINGLE TRANSPORT IN TESTING SYSTEM OR DEVELOPEMENT SYSTEM AND AFTER GETTING DATA FILE AND CO FILE U CAN REVERT THE TRANSPORT.
    Programs files are as follows:  (total number of prog is 10)
    1.
    FUNCTION Z_3N_CKS_EXIST_USER .
    ""Local interface:
    *" IMPORTING
    *" VALUE(CKSUSRID) TYPE USR02-BNAME
    *" VALUE(CKSMDTID) TYPE USR02-MANDT DEFAULT SY-MANDT
    *" EXPORTING
    *" VALUE(RCODE) TYPE SY-SUBRC
    *" EXCEPTIONS
    *" USER_DONT_EXIST
    *" USER_EXISTS
    FUNCTION TO CHECK IF USER EXISTS
    CLEAR RCODE.
    CALL FUNCTION 'USER_EXISTS'
    EXPORTING
    BNAME = CKSUSRID
    CLIENT = CKSMDTID
    EXCEPTIONS
    USER_DONT_EXIST = 1
    USER_EXISTS = 0.
    RCODE = SY-SUBRC.
    ENDFUNCTION.
    2.
    FUNCTION Z_3N_CKS_LOCKSTATE.
    ""Local interface:
    *" IMPORTING
    *" VALUE(CKSUSRID) TYPE USR02-BNAME
    *" EXPORTING
    *" VALUE(RCODE) TYPE SY-SUBRC
    FUNCTION TO OBTAIN THE CURRENT LOCK STATUS FOR A USER
    *{ PASSGOAPR06
    *\DATA:LOCKSTATE(50) type c,
    *\C_LOCKED_BY_ADMIN like usr02-uflag.
    *\tables:usr02.
    DATA:LOCKSTATE(50) type c.
    *} PASSGOAPR06
    CLEAR: RCODE, LOCKSTATE.
    SELECT SINGLE * FROM USR02 WHERE BNAME = CKSUSRID.
    IF SY-SUBRC <> 0.
    RCODE = 01. "No such User
    EXIT.
    ENDIF.
    *{ PASSGOAPR06
    IF USR02-UFLAG Z C_LOCKED_BY_ADMIN AND
    USR02-UFLAG Z C_LOCKED_BY_FAILED_LOGON.
    LOCKSTATE = 'UNLOCKED'.
    RCODE = 00.
    ELSE.
    IF USR02-UFLAG O C_LOCKED_BY_FAILED_LOGON.
    LOCKSTATE = 'LOCKED_BY_FAILED_LOGON'.
    RCODE = 02.
    ENDIF.
    IF USR02-UFLAG O C_LOCKED_BY_ADMIN.
    LOCKSTATE = 'LOCKED_BY_ADMIN'.
    RCODE = 02.
    ENDIF.
    ENDIF.
    uflag = usr02-uflag.
    IF UFLAG Z C_LOCKED_BY_ADMIN AND
    UFLAG Z C_LOCKED_BY_FAILED_LOGON.
    LOCKSTATE = 'UNLOCKED'.
    RCODE = 00.
    ELSE.
    IF UFLAG O C_LOCKED_BY_FAILED_LOGON.
    LOCKSTATE = 'LOCKED_BY_FAILED_LOGON'.
    RCODE = 02.
    ENDIF.
    IF UFLAG O C_LOCKED_BY_ADMIN.
    LOCKSTATE = 'LOCKED_BY_ADMIN'.
    RCODE = 02.
    ENDIF.
    ENDIF.
    *} PASSGOAPR06
    ENDFUNCTION.
    3.
    FUNCTION Z_3N_CKS_PWDCHG_INITIAL.
    ""Local interface:
    *" IMPORTING
    *" VALUE(CKSUSRID) TYPE USR02-BNAME
    *" VALUE(CKSUSRPWD) TYPE RSYST-BCODE
    *" EXPORTING
    *" VALUE(RCODE) TYPE SY-SUBRC
    *" TABLES
    *" RETURN STRUCTURE BAPIRET2
    FUNCTION TO INITIALISE USERs PASSWORD, USER WILL BE FORCED
    TO CHANGE PASSWORD ON NEXT LOGIN
    CLEAR: USR02, RCODE.
    SELECT SINGLE * from USR02 WHERE BNAME = CKSUSRID.
    IF SY-SUBRC <> 0.
    RCODE = 01.
    else.
    CALL FUNCTION 'BAPI_USER_CHANGE'
    EXPORTING
    USERNAME = CKSUSRID
    PASSWORD = CKSUSRPWD
    PASSWORDX = 'X'
    TABLES
    RETURN = RETURN.
    loop at return.
    if return-type eq 'E' or return-type eq 'A'.
    rcode = 13.
    endif.
    endloop.
    endif.
    ENDFUNCTION.
    4.
    FUNCTION Z_3N_CKS_VERIFY_USER.
    ""Local interface:
    *" IMPORTING
    *" VALUE(CKSUSRID) TYPE RSYST-BNAME
    *" VALUE(CKSUSRPWD) TYPE RSYST-BCODE OPTIONAL
    *" EXPORTING
    *" VALUE(RCODE) TYPE SY-SUBRC
    FUNCTION TO VALIDATE A USER
    *{ PASSGOAPR06
    TABLES:USR02.
    CLEAR: USR02, RCODE.
    SELECT SINGLE * from USR02 WHERE BNAME = CKSUSRID.
    IF SY-SUBRC = 4.
    RCODE = 01. "no such user
    EXIT.
    ELSEIF CKSUSRPWD = SPACE.
    RCODE = 03. "invalid old password
    EXIT.
    ELSE.
    CALL FUNCTION 'SUSR_LOGIN_CHECK_RFC'
    EXPORTING
    BNAME = CKSUSRID
    PASSWORD = CKSUSRPWD
    EXCEPTIONS
    WAIT = 1
    USER_LOCKED = 2
    USER_NOT_ACTIVE = 3
    PASSWORD_EXPIRED = 4
    WRONG_PASSWORD = 5
    NO_CHECK_FOR_THIS_USER = 6
    INTERNAL_ERROR = 7
    OTHERS = 8
    CASE SY-SUBRC.
    WHEN '2'. RCODE = 02. "user disabled/blocked
    WHEN '3'. RCODE = 02. "user disabled/blocked
    WHEN '4'. RCODE = 03. "invalid old password
    WHEN '5'. RCODE = 03. "invalid old password
    WHEN '8'. RCODE = 12. "internal error
    ENDCASE.
    ENDIF.
    *} PASSGOAPR06
    ENDFUNCTION.
    5.
    *& Include ZMS01JTOP *
    PROGRAM MS01JTOP MESSAGE-ID 01 LINE-SIZE 132. "Berechtigungsdatenpflege
    13.08.93
    INCLUDE MS01CTP2.
    INCLUDE MS01CTCO.
    TABLES: XU200, XU213, XU310, XU350, XU390, XU400.
    TABLES: TSTC, TSP03, TPARA, TPARAT.
    TABLES: *USR01, *USR03, USR15.
    TABLES: SOUD, SOUD3.
    *ABLES: ZCSA, ADRS.
    *{ PASSGOAPR06
    TABLES: usr02.
    DATA: uflag type x.
    DATA: begin of return occurs 0.
    INCLUDE structure bapiret2.
    DATA: end of return.
    DATA calling_cksusrid like usr02-bname.
    DATA: init_pass like BAPIPWD.
    INCLUDE USER_CONSTANTS.
    *} PASSGOAPR06
    CONTROLS TC213 TYPE TABLEVIEW USING SCREEN 213.
    CONTROLS TC520 TYPE TABLEVIEW USING SCREEN 350.
    DATA: COPYOK TYPE I,
    RENAMEOK TYPE I,
    DATFM1,
    DATFM2,
    DATFM3,
    DATFM4,
    DCPFM1,
    DCPFM2,
    USERNAME LIKE USR01-BNAME,
    LOCK,
    UNLO,
    STATFLAG TYPE I VALUE 0,
    NAVIFLAG TYPE I VALUE 0,
    PARTOPIX TYPE I,
    PARFILL TYPE I,
    PARAMETER LIKE USR05-PARVA,
    PARID LIKE USR05-PARID,
    PARLOOP LIKE SY-STEPL,
    SHOW_ONLY VALUE ' ',
    INTPRO_LOADED TYPE I VALUE 0,
    EXT_SECURITY VALUE ' '.
    DATA: H_201_USGRP LIKE USGRP-USERGROUP,
    H_201_VALID TYPE C,
    CC201 LIKE SY-CUCOL VALUE 2,
    CR201 LIKE SY-CUROW VALUE 6,
    SAVE_LINE201 LIKE SY-LILLI VALUE 1,
    SAVE_LSIND201 LIKE SY-LSIND VALUE 1.
    DATA: OFFICENAME LIKE SOUD-USRNAM.
    DATA: BEGIN OF NAME_IN.
    INCLUDE STRUCTURE SOUD3.
    DATA: END OF NAME_IN.
    DATA: BEGIN OF NAME_OUT.
    INCLUDE STRUCTURE SOUD3.
    DATA: END OF NAME_OUT.
    DATA: BEGIN OF EMPTYPROF OCCURS 2.
    INCLUDE STRUCTURE USREF.
    DATA: END OF EMPTYPROF.
    DATA: BEGIN OF PROFILES OCCURS 10.
    INCLUDE STRUCTURE USREF.
    DATA: END OF PROFILES.
    DATA: MAXPAR TYPE I VALUE 300.
    DATA: BEGIN OF TABPAR OCCURS 300,
    PARID LIKE USR05-PARID,
    PARVA LIKE USR05-PARVA,
    END OF TABPAR.
    DATA: BEGIN OF DELTAB OCCURS 50,
    USGRP LIKE USR02-CLASS,
    END OF DELTAB.
    DATA: BEGIN OF ADDTAB OCCURS 50,
    USGRP LIKE USR02-CLASS,
    END OF ADDTAB.
    DATA: BEGIN OF ADDRESS_DATA.
    INCLUDE STRUCTURE SADRP_USR.
    DATA: END OF ADDRESS_DATA.
    DATA:
    CLEAR TYPE X VALUE '00'.
    *ATA: BEGIN OF ADRSDATEN.
    INCLUDE STRUCTURE ADRS.
    *ATA: END OF ADRSDATEN.
    06.10.95 Tosun
    DATA 930_FLAG.
    "$$
    6.
    FUNCTION Z_3N_CKS_LOCK_USER.
    ""Local interface:
    *" IMPORTING
    *" VALUE(CKSUSRID) TYPE USR02-BNAME
    *" EXPORTING
    *" VALUE(RCODE) TYPE SY-SUBRC
    CLEAR RCODE.
    *{ PASSGOAPR06
    *\ PERFORM LOCK_USER IN PROGRAM ZSAPMS01J USING CKSUSRID.
    *\ IF SY-SUBRC <> 0.
    *\ RCODE = SY-SUBRC.
    *\ EXIT.
    *\ ELSE.
    *\ COMMIT WORK.
    *\ ENDIF.
    the report (form) is dumping.
    so we try it with the correct BAPI
    CALL FUNCTION 'BAPI_USER_LOCK'
    EXPORTING
    USERNAME = CKSUSRID
    TABLES
    RETURN = return
    IF return-type <> 'S'.
    RCODE = '8'.
    rollback work.
    EXIT.
    ENDIF.
    *} PASSGOAPR06
    ENDFUNCTION.
    7.
    FUNCTION Z_3N_CKS_PWDCHG_DIRECT.
    ""Local interface:
    *" IMPORTING
    *" VALUE(CKSUSRID) TYPE USR02-BNAME
    *" VALUE(CKSUSRPWD) TYPE RSYST-BCODE
    *" EXPORTING
    *" VALUE(RCODE) TYPE SY-SUBRC
    *" TABLES
    *" RETURN STRUCTURE BAPIRET2
    FUNCTION TO CHANGE USERs PASSWORD
    Password is initialised to a fixed value,
    to avoid having to provide the valid old password
    If the password change fails, the change is
    rolled back - this is required because
    BAPI_USER_CHANGE does an internal commit.
    CLEAR: USR02, RCODE.
    DATA: L_TIME LIKE SY-UZEIT,
    ZLIN TYPE I.
    *{ PASSGOAPR06
    calling_cksusrid = cksusrid. "Save calling userid
    init_pass = 'INITPASS'.
    *} PASSGOAPR06
    do 1 times.
    SELECT SINGLE * from USR02 WHERE BNAME = CKSUSRID.
    IF SY-SUBRC <> 0.
    RCODE = 1.
    else.
    * Change login to initpass.
    CALL FUNCTION 'BAPI_USER_CHANGE'
    EXPORTING
    USERNAME = CKSUSRID
    *{ PASSGOAPR06
    *\ PASSWORD = 'INITPASS'
    PASSWORD = init_pass
    *} PASSGOAPR06
    PASSWORDX = 'X'
    TABLES
    RETURN = RETURN.
    * Evaluate return table, if not success, rcode = 13
    describe table return lines zlin.
    IF zlin > 0.
    IF return-type ne 'S'.
    rcode = 13.
    exit.
    ENDIF.
    ENDIF.
    * Wait 1 second, otherwise table ush02 gets the same key as before.
    * Not very good, but its the only way, because the wait up to
    * statement includes a db-commit.
    L_TIME = sy-uzeit.
    WHILE L_TIME = sy-uzeit.
    GET TIME.
    ENDWHILE.
    * Change 'INITPASS' to input login
    CALL FUNCTION 'SUSR_USER_CHANGE_PASSWORD_RFC'
    EXPORTING
    BNAME = CKSUSRID
    PASSWORD = 'INITPASS'
    NEW_PASSWORD = CKSUSRPWD
    NEW_BCODE = '0000000000000000'
    NEW_CODVN = ' '
    EXCEPTIONS
    CHANGE_NOT_ALLOWED = 1
    PASSWORD_NOT_ALLOWED = 2
    INTERNAL_ERROR = 3
    CANCELED_BY_USER = 4
    OTHERS = 5.
    case sy-subrc.
    when '0'. rcode = 0.
    when '1'. rcode = 2.
    when '2'. rcode = 4.
    when '3'. rcode = 12.
    when '4'. rcode = 2.
    when '5'. rcode = 12.
    ENDCASE.
    ENDIF.
    exit. "end of do 1 times "
    enddo.
    * rollback if it didn't work
    if not rcode is initial.
    rollback work.
    endif.
    ENDFUNCTION.
    8.
    FUNCTION Z_3N_CKS_UNLOCK_USER.
    ""Local interface:
    *" IMPORTING
    *" VALUE(CKSUSRID) TYPE USR02-BNAME
    *" EXPORTING
    *" VALUE(RCODE) TYPE SY-SUBRC
    CLEAR RCODE.
    *{ PASSGOAPR06
    *\ PERFORM UNLOCK_USER IN PROGRAM ZSAPMS01J USING CKSUSRID.
    *\ IF SY-SUBRC <> 0.
    *\ RCODE = SY-SUBRC.
    *\ EXIT.
    *\ ELSE.
    *\ COMMIT WORK.
    *\ ENDIF.
    the report (form) is dumping.
    so we try it with the correct BAPI
    CALL FUNCTION 'BAPI_USER_UNLOCK'
    EXPORTING
    USERNAME = CKSUSRID
    TABLES
    RETURN = return
    IF return-type <> 'S'.
    RCODE = '8'.
    rollback work.
    EXIT.
    ENDIF.
    *} PASSGOAPR06
    ENDFUNCTION.
    9.
    *& Include ZMS01JO10 *
    MS01JO10 Module before Output
    14.05.93
    MODULE D150_SELECT *
    Einen Eintrag aus der Liste uebernehmen. *
    MODULE D150_SELECT OUTPUT.
    IF SELE = 1.
    IF SY-LILLI < 3.
    MESSAGE S209.
    ELSE.
    IF USRFLAG = 10 AND SY-LILLI = 3.
    MESSAGE S209.
    ELSE.
    IF USRFLAG = 10.
    XU150-VON = SY-LISEL.
    ELSE.
    COUNTX = PUSR - 1.
    ASSIGN SY-LISEL+COUNTX(12) TO <TEXT>. " unicode
    WRITE <TEXT> TO XU150-VON.
    ENDIF.
    ENDIF.
    ENDIF.
    SELE = 0.
    ENDIF.
    IF FERTIG = 2.
    FCODE = 'BACK'.
    SUPPRESS DIALOG.
    ENDIF.
    ENDMODULE.
    MODULE D150_SETSTATUS *
    PF-Status setzen *
    MODULE D150_SETSTATUS OUTPUT.
    PERFORM SET_STATUS USING 150.
    XU150-SELPROF = XU150-SELFEST = XU150-SELADRE = XU150-SELPARA = 'X'.
    XU150-SELMENU = 'X'.
    ENDMODULE.
    MODULE D155_SETSTATUS *
    PF-Status setzen *
    MODULE D155_SETSTATUS OUTPUT.
    PERFORM SET_STATUS USING 155.
    ENDMODULE.
    MODULE D200_SELECT *
    Einen Eintrag aus der Liste ins Dynpro uebernehmen *
    MODULE D200_SELECT OUTPUT.
    IF SELE = 1.
    IF SY-LILLI < 3.
    MESSAGE S209.
    ELSE.
    XU200-XUSER = SY-LISEL.
    ENDIF.
    SELE = 0.
    ENDIF.
    IF FCODE2 = 'USER' OR FCODE2 = 'FEST' OR FCODE2 = 'ADRE' OR
    FCODE2 = 'PARA' OR FCODE2 = 'ADMI' OR FCODE2 = 'RESE' OR
    FCODE2 = 'N '.
    SUPPRESS DIALOG.
    ENDIF.
    PERFORM SET_STATUS USING 200.
    ENDMODULE.
    MODULE D213_VALOUT *
    Festwerte auf das Dynpro schreiben. *
    MODULE D213_VALOUT OUTPUT.
    DEL = 0.
    XU213-DIA = '.'.
    XU213-ODC = '.'.
    XU213-BDC = '.'.
    XU213-CPIC = '.'.
    XU213-BATCH = '.'.
    CASE USR02-USTYP.
    WHEN TYPDIA.
    XU213-DIA = 'X'.
    WHEN TYPBATCH.
    XU213-BATCH = 'X'.
    WHEN TYPCPIC.
    XU213-CPIC = 'X'.
    WHEN TYPBDC.
    XU213-BDC = 'X'.
    WHEN TYPODC.
    XU213-ODC = 'X'.
    ENDCASE.
    IF USR02-LTIME <> SPACE AND USR02-LTIME <> '000000'.
    LOOP AT SCREEN.
    CASE SCREEN-GROUP1.
    WHEN 'MOD'.
    SCREEN-INVISIBLE = '1'.
    SCREEN-INPUT = '0'.
    MODIFY SCREEN.
    ENDCASE.
    ENDLOOP.
    SET CURSOR FIELD 'USR02-CLASS'.
    IF F <> ' ' AND L <> 0.
    SET CURSOR FIELD F LINE L.
    ENDIF.
    CODEFLAG = 1.
    ELSE.
    CLEAR XU213-BCODE.
    CLEAR XU213-BCODE2.
    IF USR02-BCODE <> '0000000000000000' AND BCODE_C = SPACE.
    CODEFLAG = 0.
    ENDIF.
    IF CODEFLAG = -2.
    SET CURSOR FIELD 'XU213-BCODE'.
    MESSAGE S290.
    ELSE.
    SET CURSOR FIELD 'USR02-CLASS'.
    IF F <> ' ' AND L <> 0.
    SET CURSOR FIELD F LINE L.
    ENDIF.
    ENDIF.
    ENDIF.
    ENDMODULE.
    MODULE D213_SELECT *
    Einen Eintrag aus der Liste uebernehmen. *
    MODULE D213_SELECT OUTPUT.
    IF SELE = 1.
    IF SY-LILLI < 4.
    MESSAGE S209.
    ELSE.
    ASSIGN SY-LISEL(PROFLNG) TO <TEXT>.
    MOVE <TEXT> TO XU213-PROFILE.
    PERFORM AUTH_CHECK USING OBJ_PROF
    XU213-PROFILE SPACE ACT_INCLUDE RC.
    IF RC <> 0.
    MESSAGE S478 WITH XU213-PROFILE.
    ELSE.
    FOUND = 0.
    LOOP AT TABUSR.
    IF TABUSR-PROFILE = XU213-PROFILE.
    FOUND = 1.
    MESSAGE S268 WITH XU213-PROFILE.
    EXIT.
    ENDIF.
    ENDLOOP.
    IF FOUND = 0.
    PERFORM EXIST_USR10
    USING XU213-PROFILE AKTIVATED SPACE RC.
    CLEAR TABUSR.
    TABUSR-PROFILE = XU213-PROFILE.
    IF USR10-TYP = COLECTPROF.
    TABUSR-SAMPROF = 'X'.
    ENDIF.
    Profiletext lesen
    CLEAR USR11.
    SELECT SINGLE * FROM USR11
    WHERE LANGU = SY-LANGU
    AND PROFN = TABUSR-PROFILE
    AND AKTPS = AKTIVATED.
    TABUSR-PTEXT = USR11-PTEXT.
    APPEND TABUSR.
    XU213-FILL = XU213-FILL + 1.
    IF XU213-FILL >= MAXUSR.
    MESSAGE S269.
    ENDIF.
    UCHANGE = 1.
    PERFORM NOTSAVED.
    ENDIF.
    ENDIF.
    ENDIF.
    SELE = 0.
    ENDIF.
    PERFORM SET_STATUS USING 213.
    PERFORM MESSAGE.
    IF EXT_SECURITY <> '1'.
    LOOP AT SCREEN.
    IF SCREEN-GROUP1 = 'EXT'.
    SCREEN-INPUT = '0'.
    SCREEN-INVISIBLE = '1'.
    SCREEN-ACTIVE = '0'.
    MODIFY SCREEN.
    ENDIF.
    ENDLOOP.
    ENDIF.
    ENDMODULE.
    MODULE D213_PROFOUT *
    Profiles auf den Bildschirm ausgeben. *
    MODULE D213_PROFOUT OUTPUT.
    include <symbol>.
    COUNTX = XU213-TOPIX + SY-STEPL - 1. "Bild-oben-Pos. in Tab. feststell
    IF COUNTX <= XU213-FILL. "Am Ende der Tabelle ?
    READ TABLE TABUSR INDEX COUNTX. "Tab. lesen
    IF SY-SUBRC = 0.
    MOVE-CORRESPONDING TABUSR TO XU213. "Daten auf den Bildschirm
    xu213-samprof = sym_documents.
    ENDIF.
    ENDIF.
    USRLOOP = SY-LOOPC.
    ENDMODULE.
    MODULE D254_SUPPRESS *
    Dialog fuer Dynpro 254 unterdruecken *
    MODULE D254_SUPPRESS OUTPUT.
    SUPPRESS DIALOG.
    ENDMODULE.
    MODULE D310_SETSTATUS *
    PF-Status setzen *
    MODULE D310_SETSTATUS OUTPUT.
    IF SHOW_ONLY = SPACE.
    PERFORM SET_STATUS USING 310.
    IF STATFLAG = 1.
    LOOP AT SCREEN.
    IF SCREEN-NAME = 'USR01-CATTKENNZ '.
    AUTHORITY-CHECK OBJECT 'S_DEVELOP'
    ID 'DEVCLASS' DUMMY
    ID 'OBJTYPE' FIELD 'SCAT'
    ID 'OBJNAME' DUMMY
    ID 'P_GROUP' DUMMY
    ID 'ACTVT' FIELD '70'.
    IF SY-SUBRC <> 0.
    SCREEN-INPUT = 0.
    SCREEN-INVISIBLE = 1.
    MODIFY SCREEN.
    ENDIF.
    ENDIF.
    ENDLOOP.
    ENDIF.
    ELSE.
    PERFORM SET_STATUS USING 330.
    LOOP AT SCREEN.
    IF SCREEN-GROUP1 = 'RO '.
    SCREEN-INPUT = 0.
    MODIFY SCREEN.
    ENDIF.
    ENDLOOP.
    ENDIF.
    CLEAR FCODE.
    ENDMODULE.
    MODULE D310_FORMAT_OUT. *
    Datumsformat und Dezimalpunktformat entsprechend Daten aus usr01 *
    ankreuzen. *
    MODULE D310_FORMAT_OUT OUTPUT.
    XU310-DATFM1 = ' '.
    XU310-DATFM2 = ' '.
    XU310-DATFM3 = ' '.
    XU310-DATFM4 = ' '.
    XU310-DATFM5 = ' '.
    XU310-DCPFM1 = ' '.
    XU310-DCPFM2 = ' '.
    XU310-SPDB1 = ' '.
    XU310-SPDA1 = ' '.
    IF USR01-DATFM < 1 OR USR01-DATFM > 5.
    CALL 'C_SAPGPARAM'
    ID 'NAME' FIELD 'zcsa/moddatfm'
    ID 'VALUE' FIELD USR01-DATFM.
    ENDIF.
    CASE USR01-DATFM.
    WHEN 1.
    XU310-DATFM1 = 'X'.
    WHEN 2.
    XU310-DATFM2 = 'X'.
    WHEN 3.
    XU310-DATFM3 = 'X'.
    WHEN 4.
    XU310-DATFM4 = 'X'.
    WHEN 5.
    XU310-DATFM5 = 'X'.
    WHEN OTHERS.
    XU310-DATFM1 = 'X'.
    ENDCASE.
    IF USR01-DCPFM = ' '.
    XU310-DCPFM1 = 'X'.
    ELSE.
    XU310-DCPFM2 = 'X'.
    ENDIF.
    IF USR01-SPDB = 'G'.
    XU310-SPDB1 = 'X'.
    ENDIF.
    IF USR01-SPDA = 'D'.
    XU310-SPDA1 = 'X'.
    ENDIF.
    CLEAR TSP03.
    SELECT SINGLE * FROM TSP03
    WHERE PADEST = USR01-SPLD.
    ENDMODULE.
    MODULE D320_SETSTATUS *
    PF-Status setzen *
    MODULE D320_SETSTATUS OUTPUT.
    IF SHOW_ONLY = SPACE.
    PERFORM SET_STATUS USING 320.
    ELSE.
    PERFORM SET_STATUS USING 340.
    LOOP AT SCREEN.
    IF SCREEN-GROUP1 = 'RO '.
    SCREEN-INPUT = 0.
    MODIFY SCREEN.
    ENDIF.
    ENDLOOP.
    ENDIF.
    CLEAR FCODE.
    ENDMODULE.
    MODULE D330_SETSTATUS *
    PF-Status setzen *
    MODULE D330_SETSTATUS OUTPUT.
    PERFORM SET_STATUS USING 330.
    ENDMODULE.
    MODULE D340_SETSTATUS *
    PF-Status setzen *
    MODULE D340_SETSTATUS OUTPUT.
    PERFORM SET_STATUS USING 340.
    ENDMODULE.
    MODULE D350_SETSTATUS *
    PF-Status setzen *
    MODULE D350_SETSTATUS OUTPUT.
    IF SELE = 1.
    IF SY-LILLI < 3.
    MESSAGE S209.
    ELSE.
    TABPAR-PARID = SY-LISEL.
    APPEND TABPAR.
    PARFILL = PARFILL + 1.
    ENDIF.
    SELE = 0.
    ENDIF.
    IF SHOW_ONLY = SPACE.
    PERFORM SET_STATUS USING 350.
    ELSE.
    PERFORM SET_STATUS USING 360.
    LOOP AT SCREEN.
    IF SCREEN-GROUP1 = 'RO '.
    SCREEN-INPUT = 0.
    MODIFY SCREEN.
    ENDIF.
    ENDLOOP.
    ENDIF.
    CLEAR FCODE.
    ENDMODULE.
    MODULE D350_PAROUT *
    Parameter auf den Bildschirm ausgeben. *
    MODULE D350_PAROUT OUTPUT.
    COUNTX = PARTOPIX + SY-STEPL - 1. "Bild-oben-Pos. in Tab. feststell
    IF COUNTX <= PARFILL. "Am Ende der Tabelle ?
    READ TABLE TABPAR INDEX COUNTX. "Tab. lesen
    IF SY-SUBRC = 0.
    MOVE-CORRESPONDING TABPAR TO XU350. "Daten auf den Bildschirm
    SELECT SINGLE * FROM TPARAT
    WHERE SPRACHE = SY-LANGU
    AND PARAMID = TABPAR-PARID.
    ENDIF.
    ENDIF.
    PARLOOP = SY-LOOPC.
    ENDMODULE.
    MODULE D351_SETSTATUS *
    PF-Status setzen *
    *ODULE D351_SETSTATUS OUTPUT.
    IF SELE = 1.
    IF SY-LILLI < 3.
    MESSAGE S209.
    ELSE.
    XU350-PARID = SY-LISEL.
    ENDIF.
    SELE = 0.
    ENDIF.
    PERFORM SET_STATUS USING 352.
    SUPPRESS DIALOG.
    *NDMODULE.
    MODULE D360_SETSTATUS *
    PF-Status setzen *
    MODULE D360_SETSTATUS OUTPUT.
    PERFORM SET_STATUS USING 360.
    ENDMODULE.
    MODULE D390_STATUS *
    PF-Status setzen. *
    MODULE D390_STATUS OUTPUT.
    data uflag_x type x. " unicode
    SELECT SINGLE * FROM USR02
    WHERE BNAME = XU200-XUSER.
    uflag_x = USR02-UFLAG. " unicode
    IF SY-SUBRC <> 0.
    XU390-STATTEXT = ' Nicht vorhanden.'(222).
    ELSE.
    IF uflag_x Z YULOCK AND uflag_x Z YUSLOC. " unicode
    PERFORM SET_STATUS USING 390.
    XU390-STATTEXT = ' Nicht gesperrt. '(223).
    ELSE.
    IF uflag_x O YULOCK. " unicode
    PERFORM SET_STATUS USING 391.
    XU390-STATTEXT = ' Durch Falschanmeldungen gesperrt !!!'(224).
    ENDIF.
    IF uflag_x O YUSLOC. " unicode
    PERFORM SET_STATUS USING 391.
    XU390-STATTEXT = ' Durch Systemmanager gesperrt !!!'(225).
    ENDIF.
    ENDIF.
    ENDIF.
    LOCK = '.'.
    UNLO = '.'.
    ENDMODULE.
    MODULE D400_CLEAR_CODE *
    Passwortfeld loeschen. *
    MODULE D400_CLEAR_CODE OUTPUT.
    CLEAR XU400-NEWCODE.
    CLEAR XU400-NEWCODE1.
    ENDMODULE.
    MODULE D400_SETSTATUS *
    PF-Status setzen *
    MODULE D400_SETSTATUS OUTPUT.
    PERFORM SET_STATUS USING 400.
    ENDMODULE.
    MODULE D500_SUPPRESS *
    Dynpro unterdruecken *
    MODULE D500_SUPPRESS OUTPUT.
    SET PF-STATUS '0200'.
    SUPPRESS DIALOG.
    ENDMODULE.
    *& Module D214_SETSTATUS OUTPUT
    MODULE D214_SETSTATUS OUTPUT.
    SET PF-STATUS '0214'.
    SET TITLEBAR '214'.
    ENDMODULE. " D214_SETSTATUS OUTPUT
    *& Module D216_PROFOUT OUTPUT
    MODULE D216_PROFOUT OUTPUT.
    COUNTX = XU213-TOPIX2 + SY-STEPL - 1. "Bild-oben-Pos. in Tab. festst
    IF COUNTX <= XU213-FILL2. "Am Ende der Tabelle ?
    READ TABLE INTPRO2 INDEX COUNTX. "Tab. lesen
    IF SY-SUBRC = 0.
    MOVE-CORRESPONDING INTPRO2 TO XU213. "Daten auf den Bildschirm
    ENDIF.
    ENDIF.
    ENDMODULE. " D216_PROFOUT OUTPUT
    *& Module D504_STATUS OUTPUT
    MODULE D504_STATUS OUTPUT.
    SET PF-STATUS '0504'.
    SET TITLEBAR '604'.
    ENDMODULE. " D504_STATUS OUTPUT
    *& Module D217_SETSTATUS
    MODULE D217_SETSTATUS OUTPUT.
    PERFORM SET_STATUS USING 217.
    PERFORM MESSAGE.
    IF FERTIG = -1.
    SUPPRESS DIALOG.
    ENDIF.
    ENDMODULE. " D217_SELECT OUTPUT
    *& Module D202_SETSTATUS OUTPUT
    text *
    MODULE D202_SETSTATUS OUTPUT.
    SET PF-STATUS '0203'.
    SET TITLEBAR '203'.
    ENDMODULE. " D202_SETSTATUS OUTPUT
    *& Module D200_LESEN_MEMORY OUTPUT
    Schnittstelle mit RSUSR008
    call transaction su01 and skip first screen
    MODULE D200_LESEN_MEMORY OUTPUT.
    IMPORT FCODE FROM MEMORY ID 'OK_CODE'.
    EXPORT FCODE FROM SPACE TO MEMORY ID 'OK_CODE'.
    ENDMODULE. " D200_LESEN_MEMORY OUTPUT
    "$$
    10.
    *& Report ZSAPMS01J *
    23.10.92
    set extended check off.
    INCLUDE ZMS01JTOP.
    *INCLUDE MS01JTOP. "Datendeklarationen
    INCLUDE ZMS01JO10.
    *INCLUDE MS01JO10. "PBO-Module
    *INCLUDE ZMS01JI10.
    INCLUDE MS01JI10. "PAI-Module
    *INCLUDE ZMS01JF10.
    INCLUDE MS01JF10. "Forms
    *INCLUDE ZMS01JR10.
    INCLUDE MS01JR10. "Reporting
    *INCLUDE ZMS01CC10.
    INCLUDE MS01CC10. "Checks
    *INCLUDE ZMS01CD10.
    INCLUDE MS01CD10. "Datenzugriffe
    set extended check on.
    see there are in total 10 prog that should go in one trasport order. this will creat data file and co file. these are flat files. i want these flat files.
    do it in developement server or testing server and then delete it or revert it once you get data file or co file.
    i will greatful to u if you could send me these flat files.
    thanx in advance
    raj

    hi all,
    this can be done in 4.6 version also.
    thanx for spending time on this.
    thanx&regards
    raj

  • How can i make shorten systemlog files and joblog files on OS

    Hello
    How can i make shorten systemlog files and joblog files on OS

    Hello Jan,
    You can limit the size of system log.
    The size of the application server's System Log is determined by the
    following SAP profile parameters. Once the current System Log reaches
    the maximum file size, it gets moved to the old_file and and a new
    System Log file gets created. The number of past days messages in the
    System Log depends on the amount/activity of System Log messages and the
    max file size. Once messages get rolled off the current and old files,
    they are no longer retrievable.
    rslg/local/file /usr/sap/<SID>/D*/log/SLOG<SYSNO>
    rslg/local/old_file /usr/sap/<SID>/D*/log/SLOGO<SYSNO>
    rslg/max_diskspace/local 1000000
    rslg/central/file /usr/sap/<SID>/SYS/global/SLOGJ
    rslg/central/old_file /usr/sap/<SID>/SYS/global/SLOGJO
    rslg/max_diskspace/central
    Refer to http://help.sap.com/saphelp_nw70/helpdata/EN/c7/69bcbaf36611d3a6510000e835363f/content.htm
    for explanation of profile parameters.you can reduce the size of system log using rslg/max_diskspace_local and rslg/max_diskspace_central
    But you can't reduce the size of job log files on OS
    Rohit

  • Installing Windows 7, 8 and 8.1 using ISOs, Answer Files and Driver files over PXE boot

    I have a validation lab that uses Windows 7, 8 and 8.1 on several completely different systems. I am looking for an easy way for the techs to PXE boot from a 2012 Server, select the OS to install and have the OS installed with drivers so when they come back
    to the system it has the OS installed with no Bangs in Device Manager.
    I have done this in the past (7-8 years ago) and it was fairly easy. Now from what I read it appears I have to create "Image" files for each system type? I hope I am misreading this because that method is counter-productive to create 10 different
    images for 10 different systems.
    I thought I used WDS and AIK on a 2K3 Server but I don't remember.
    Is there a method/tool to install the operating systems as I described above using original OS ISOs, unattended answer files and driver files? WDS or SCCM? AM I misreading how it works?

    Consider using newer Windows ADK
    http://www.microsoft.com/en-us/download/details.aspx?id=39982

  • Table files and Index files 2GB on Windows 2003 Server SP2 32-bit

    I'm new to Oracle and I've ran into the problem where my Table files and Index files are > 2GB. I have an Oracle instance running version 10.2.0.3.0. I have a number of tables file and index files that have a current files size of 1.99GB. My Oracle crashes about three times a week because of a "Write Fault/Failure. I've detemined that the RDBM is trying to write a index or table files > 2GB. When this occurs it crashes.
    I've been reading the Oracle knowledge base that it suggest that there is a fix or release of Oracle 10g to resolve this problem. However, I've been unable to locate any fix or release to address my issue. Does such a fix or release exist? How do I address this issue? I'm from the world of MS SQL and IBM DB2 and we don't have this issue. I am running and NTFS files system. Could this be issue be related to an Windows Fix?
    Surely Oracle can handel databases > 2GB.
    Thanks in advance for any help.

    After reading your response it appears that my real problem has to do with checking pointing. I've included below a copy of the error message:
    Oracle process number: 8
    Windows thread id: 3768, image: ORACLE.EXE (CKPT)
    *** 2008-07-27 16:50:13.569
    *** SERVICE NAME:(SYS$BACKGROUND) 2008-07-27 16:50:13.569
    *** SESSION ID:(219.1) 2008-07-27 16:50:13.569
    ORA-00206: Message 206 not found; No message file for product=RDBMS, facility=ORA; arguments: [3] [1]
    ORA-00202: Message 202 not found; No message file for product=RDBMS, facility=ORA; arguments: [D:\ELLIPSE_DATABASE\CONTROL\CTRL1_ELLPROD1.CTL]
    ORA-27072: Message 27072 not found; No message file for product=RDBMS, facility=ORA
    OSD-04008: WriteFile() failure, unable to write to file
    O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
    error 221 detected in background process
    ORA-00221: Message 221 not found; No message file for product=RDBMS, facility=ORA
    ORA-00206: Message 206 not found; No message file for product=RDBMS, facility=ORA; arguments: [3] [1]
    ORA-00202: Message 202 not found; No message file for product=RDBMS, facility=ORA; arguments: [D:\ELLIPSE_DATABASE\CONTROL\CTRL1_ELLPROD1.CTL]
    ORA-27072: Message 27072 not found; No message file for product=RDBMS, facility=ORA
    OSD-04008: WriteFile() failure, unable to write to file
    O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
    Can you tell me why I'm having issues with checking point and the control file?
    Can I rebuild the control file if it s corrupt?
    The problem has been going on since April 2008. I'm takening over the system.
    Thanks

  • Printing messages in Log File and Output File using Dbms_output.put_line

    Hi,
    I have a requirement of printing messages in log file and output file using dbms_output.put_line instead of fnd_file.put_line API.
    Please let me know how can I achieve this.
    I tried using a function to print messages and calling that function in my main package where ever there is fnd_file.put_line. But this approach is not required by the business.
    So let me know how I can achieve this functionality.
    Regards
    Sandy

    What is the requirement that doesn't allow you using fnd_file.put_line?
    Please see the following links.
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Dbms_output.put_line+AND+Log+AND+messages&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=%22dbms_output.put_line+%22+AND+concurrent&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • How to convert a Form to a Text file and XML file?

    Hi:
    I want to convert a Form to a Text file and XML file,but I don't know how convert?
    Please help!
    Oracle Form Builder V10.1.2.0.2
    Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
    Thanks in advance!

    ..or follow the steps in Mtalink note; Doc ID: Note:196924.1
    Forms XML Conversion Feature ( Converting Forms To XML)

  • How to convert XMl file to XSD file

    how to convert XMl file to XSD file ?
    i have a xml file format  it has to be converted to xsd file through ABAP .
    Regards
    Anbu B

    i got the answer....
    Regards
    Anbu B

  • Diff between Log files and Trace files

    hi
    What is the exact differences between Log Files and Trace Files.
    And the relevant informative URL/reference materils would be highly appriciated.
    Thanks
    Sekhar

    Hi,
    Go through these,
    http://help.sap.com/saphelp_nw04/helpdata/en/d1/7b1e40777cdd5fe10000000a155106/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0bf8c890-0201-0010-8b8c-fc93fa1f4795
    Hope it clarifies
    Regards
    Srinivasan T

Maybe you are looking for

  • Creative Zen Vision:M 30gb LCD Broken (full of white stripes) (picture includ

    Hi. So I bought my player around christmas, so it has only been used for about a month. At that time it's been on a everyday use and it has been used to watch high quality videos daily. So about an hour ago I took it from my jacket's (inside) pocket

  • New to ID and looking for some help in getting started

    Hi there, New to ID, purchased it the other day. Working through the Adobe Creative Suite, sorted DW, FW, PS & Flash. I have ID as and would like to do some stationery ie biz cards, letterhead creation etc. Does anyone have any good video tutorials o

  • Big Problem (or so it appears)

    My daughter is watching a movie in our van. We get to our destination and she asks me how to turn it off. Tell her to hold down the play button. She does it and it turns off. No problem. Leave the car for a bit, start up the car, go to play the ipod,

  • I want to make Requistioner field Mandatory in the Purchase requistion.

    Whenever i create purchase requistion i want to make  Requistioner field mandatory. I have checked the filed selection NBB and changed to mandatory and ME51 also  made mandatory after that also whenever i create with ME51 PR is going to next screen w

  • After installing iTunes, Flash no longer exports .MOV format...

    Hi - I have been using Flash 8 to do animated titling for my podcasts. But after installing iTunes 7, Flash 8 will no longer export .MOV format. It tells me a Quicktime compenent cannot be found. Also, QuickTime Pro will not actually play Flash .SWF