Generation of Requirements Automatically

Dear Experts,
Is it possible to generate requirements for externally procured materials automatically without running MRP ?
Suppose if the Re-order point for a material is maintained as 100 and if the stock level goes below 100 the system should generate the requirement.
Please propose whether any function available in comsumption based planning to meet the above requirement .
Regards,
Ram

Hi,
This might be an alternative soluton (KANBAN w/o MRP):
http://help.sap.com/saphelp_47x200/helpdata/en/cb/7f8afc43b711d189410000e829fbbd/frameset.htm
(requirement wouldn't be triggered automatically, and your whole supply chain process should be suitable for this sceanrio...I mean it is not just 'Customizing'...
Anyway, I don't think you would have chance to get auto PurReq w/o MRP run in standard SAP)
Regrads,
Csaba

Similar Messages

IPad (3rd generation) does not automatically connect to wi-fi.

iPad (3rd generation) does not automatically connect to wi-fi. It is fully updated to 5.1.1 but you have to manually connect after turning off and back on. I also have an iPad 2 with the same OS but it automatically connects. The wi-fi has no security.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

TransactionAttribute REQUIRED automatically rolls back on a RuntimeExceptio

Hi ,
While going through tutorials of Transaction Attributes on EJB .
I have read that REQUIRED automatically rolls back on a RuntimeException .
I have a query here , Please tell me When a CheckedException Arises , how can we manually rollback the Transaction ??
Thanks in advance .

Hi Ravi,
When using container-managed transactions (which is the default), the application can call SessionContext(or MessageDrivenContext).setRollbackOnly() to ensure that the current transaction will not commit. The easiest way to acquire the EJB context is to inject it :
@Resource SessionContext sessionContext;
--ken

6th generation iPod nano automatically turns off when I push het sleep/wake button or when screen turns black after a while. How can I solve this ?

My 6th generation iPod nano automatically turns off (=stops the music) when I push het sleep/wake button or when screen turns black for power saving mode. Does anyone know how to solve this ?
I have already tried resetting, connecting to PC/iTunes to check the software version, turning off/on, I don't have any inspiration anymore.
Thanks for your suggestions!

Hi VeerleD,
If your iPod touch unexpectedly powers off, you may want to use the steps in this article to troubleshoot -
iPhone: Hardware troubleshooting (The steps apply for the iPod touch) -
Specifically -
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for using Apple Support Communities.
Best,
Brett L

Nano 7th generation turns off automatically while playing music

Start playing music and the nano shuts off at random times, usually in the first minute, even with full battery

The headphone jack on the Nano is very tight when it is new. Push the headset jack farther in, there should be no space between the plastic on the headset jack and the body of the Nano.

We want to download construction game on my sons ipod 4th generation it requires digital compass ?? please help

we want to download construction game on my sons ipod 4th generation

No iPods have a digital compass. Only iOS devices (iPhones and iPads with the cellular option) that have a have a digital compass.

IPod Nano (7th generation) constantly requires a hard reset

About 7-9 times a week I have to perform a hard reset on my iPod. The iPod does not respond when any of the buttons are pressed and the battery can be completely full. After the hard reset everything seems to work properly.
This commonly occurs for me when the iPod is not in use for a few hours or when the battery is charging through the wall adapter (This is very annoying becuase the battery will no longer charge. When I come back 40 minutes later the battery will be at the same percentage as when I left it). That said, it has also occured when plugged into the computer or in the middle of listening to the media, just not as common.
I'm not sure if it is related, but sometimes I'll be listening to an audiobook or podcast and the iPod will reset itself. The iPod then bookmarks my "stopping point" an hour or two behind where I actually was.
To resolve the issue I have restored the iPod multiple times through iTunes, even using a different iTunes library on a different computer. No luck. Does anybody have any suggestions or do I need to make the two hour trip to the local Apple store? Is this something I should just expect from the product?
Cheers!

Make the trip. Make a Genius Bar appointment before you go.

How to Customize Employee Number Generation?

m trying to generate a custom employee,applicant numbers through a dummy business group.
I've created on Application: Oracle E-Business 11.5.10.2 the work structure and am now on the step of customizing the employee generating number.
I followed the link steps:
Below steps already done:
Technical Side:
1- Create New Sequence in DB.
-----Sequence Code----------
DROP SEQUENCE APPS.APPSLEAD_CUST_NUMB;
CREATE SEQUENCE APPS.APPSLEAD_CUST_NUMB
START WITH 1
MAXVALUE 999999999999999999999999999
MINVALUE 0
NOCYCLE
NOCACHE
NOORDER;
2- Create New Package for issuing the numbers.
----------Package Code--------------
Create or replace package appslead_package as
Function get_emp_custom_number (
p_business_group_id IN number
,p_legislation_code IN varchar2
,p_person_type IN varchar2
,p_person_number IN varchar2
,p_party_id IN number
,p_person_id IN number
,p_national_id IN varchar2
,p_date_of_birth IN date
) return varchar2;
end appslead_package;
Create or replace package body APPSLEAD_PACKAGE as
Function GET_EMP_CUSTOM_NUMBER (
p_business_group_id IN number
,p_legislation_code IN varchar2
,p_person_type IN varchar2
,p_person_number IN varchar2
,p_party_id IN number
,p_person_id IN number
,p_national_id IN varchar2
,p_date_of_birth IN date
) return varchar2 as
/*Check if the person id is exists on the system or not*/
cursor person_exists is
select employee_number,applicant_number,npw_number
from per_all_people_f
where party_id = p_party_id;
--and p_effective_date between effective_start_date and effective_end_date;
lseq_num number;
l_next varchar2(30);
l_emp_num varchar2(30);
l_apl_num varchar2(30);
l_npw_num varchar2(30);
begin
open person_exists;
fetch person_exists into l_emp_num,l_apl_num,l_npw_num;
if person_exists%notfound then
Select to_char(Appslead_Cust_Numb.Nextval) Into lseq_num From Dual;
l_next := 'AppsLead-'||lseq_num;
return l_next;
Else
If p_person_type = 'EMP' then
l_next := l_emp_num;
Elsif p_person_type = 'APL' then
l_next := l_apl_num;
Elsif p_person_type = 'CWK' then
l_next := l_apl_num;
End if;
End if;
Close person_exists;
return l_next;
end get_emp_custom_number;
End appslead_package;
Functional Side:
1- Create or Modify Business Group Employee numbering method to Manual.
2- Create New Formula Function.
3- Create New Formula EMP_NUMBER_GENERATION with Type "Person Number Generation"
------Formula Script--------
EMP_NUMBER_GENERATION
Create Custome formula for generation employee number*/
DEFAULT FOR Person_Number IS ' '
DEFAULT FOR Party_ID IS 0
DEFAULT FOR Person_ID IS 0
DEFAULT FOR National_ID IS ' '
DEFAULT FOR DATE_OF_BIRTH IS '1900/01/01 00:00:00' (date)
DEFAULT FOR Hire_Date IS '1900/01/01 00:00:00' (date)
INPUTS ARE
Legislation_Code (text),
Person_Type (text),
Person_number (text),
Party_id,
Person_id,
Date_of_birth (date),
Hire_date (date),
National_ID (text)
Next_Number = '0'
Invalid_msg = ' '
IF Person_Type = 'EMP' then
Next_Number = TO_CHAR(Get_Emp_Custom_Number(Legislation_Code,Person_Type,Person_Number,Party_Id,Person_Id,National_ID,Date_Of_Birth))
Else
Invalid_msg = 'This is not an person_type of Employee!'
Return Next_Number
Now, when I create a new employee I need the employee number to appear as
"AppsLead-Emp-00001"
But its not, and the screen of employee master is not allow to create an employee without filling the number.
How to do the same?
What should be the Employee Number Generation ?
1- Automatic generation with Global Sequencing
2- Manual
If your answer is manual, in the employee master screen, the employee id is required and when you create the employee the id should be entered.

there are some fast formula you can use.
Please check metalink

Automatic Batch creation for a material.

Hi Friends,
we require automatic batch creation at the time of confirmation of process order for a particular material not for all the materials existing in the same plant and also not for all the materials existing in the same material type.
we have activated batch level at the material level,
Pl give some idea,
Regards
Sadan

Hi,
Batch is created automatically either when an order is created or released. (setting in OPKP)
I hope its not possible during confirmation.

Automatic assignment responsible group partner function of Activities

Hi,
I need help on below requirement>>
Automatic assignment responsible group partner function of Activities when status is set to u201CIncorrectly Assignedu201D.
Thanks

you can check with order status badi
BR
Radek

Service tax Receivable and payable adjustment automatically

Dear GURU,
Service Tax Receivable & Payable The Client wants to have a Service Tax Control Account that would be automatically populated for the particular bill / Invoice on the day of Vendor Payment and Customer Receipt.
a. Example
While Billing Entry - 31.01.2008 (SD)
Customer A/c 20000
To Service Tax Payable 500
To Rental Income A/c 19500
(Or)
Service Income
(Provision Entry only)
31.01.2008(MM)
Security Charges 4750
Service Tax Receivable 250
To Vendor A/c 4950
To TDs Payable A/c 50
(Provision Entry Only)
On Incoming Payments from Customers (05.03.2008) (FI)
Bank A/c 19500
TDs Receivable 500
To Customer A/c 20000
(Required Automatically (or) Control) 05.03.2008
Service Tax Payable 500
To Service Tax Control A/c 500
On Outgoing Payments to Vendors (10.02.2008) (FI)
Vendor A/C 4950
To Bank A/c 4950
(Required Automatically (or) Control) 10.02.2008
Service Tax control A/C 250
To Service Tax Receivable 250
Please Note: The entries in Red Font are required to be passed automatically
pls suggest

Hye
You can not generate this entry auomatically. Other option available is Create Tax code for Ex S1 assign account service tax controll account and create another Tax code Say T1 assign GL Service tax cenvatable ( With Target TAx Code as S1). You have to maintain the Service tax controll item with open item management.
On a periodical basis you execute f.38 transfer the Data from S1 to T1 and adjust the eligiblie amount on a periodical basis.

Automatic Clearing for Customers and Vendors

Hi,
We want to clear the open items at a time for the customers and vendors.
Ex: Cutomer "A" contains 15000 Dr(20 Line items), 12000 Cr(15 Line items) and closing balance 3000 Dr
Now we want to clear the all open items at a time and remaining(3000 Dr) balance for open items.
We don't want Manual Clearing(F-32)
Is this possible through F.13 or others?
Thanks in advance

No you cant
The automatic program groups items from an account together where they have the same
entries in the following fields:
Reconciliation account number
Currency
Special G/L indicator
Five freely defined criteria from document header or line item, for example,
assignment field, reference number, and so on.
If the balance, in local currency, of the items within a group is zero, the system
automatically clears them and creates clearing documents.
All accounts requiring automatic clearing must be defined in Customizing.
The automatic clearing program does not clear:
Noted items
Statistical postings and certain special G/L transactions relating to bills of
exchange
Down payments can only be cleared if down payment clearing items of the
same amount have already been posted.
items with withholding tax entries

GR miss transfer requirment, how to picking it to bin. Manul TO failed.

Due to wrong customizing , GR for return purchase order did not create Transfer requirment automatically. MVT is 161.
the goods is recored in interim storage area 916 and WM mvt is 601.
currently , because of no TR, i cannot create transfer order to putaway from acture bin.
i try to create TO for GR material document with T-code LS06, but it is failed , i encounter below error.
"You have not selected any data for the material document 520105801
Message no. L2030"
Expert ,please help me to soft this issue.
thanks for your help.

In LT01,whether MVT 999 is ok?
In standard system, mvt 999 is used.
In LT10, symbol "Lock" in material, i cannot select item. how can i unlock it?
I don't know what you are doing. If a quant is locked you cannot move it.
I hope you are not trying to move the -quant which is in storage type 916. You should find the corresponding +quant in a "normal" storage type and move it to the -quant, to 916.
You can find information e.g. on SAP online help, answered threads about LT01/LT10 and about how to eliminate -quants in interim storage types.
Edited by: Csaba Szommer on Aug 30, 2011 8:53 AM

Automatic System Monitoring Reports

Hello Solution Manager Experts!
We already successfully set up System Monitoring for several SAP ERP and NetWeaver systems on SAP Solution Manager 7.1.
Now we would like to automatically send system monitoring/ IT Performance reports by e-mail to all the System Administrators. This should be done daily.
Does the new SAP Solution Manager 7.1 provide this function (generation of daily automatic Reports in background and sending these reports by e-mail)?
Any helpful information will be very appreciated
Kind regards

Hello,
You're welcome.
The prerequisites are: execute solman_setup entirely and execute the managed system configuration for the monitored host. These tasks includes the SMD Agent, which will communicate the system with Solution Manager.
Regarding RZ20 reports, as far as I know you have the actual IT performance reporting and, in a top level, the EarlyWatch Report.
As you may know, 7.1 presents a new infrastructure for Technical Monitoring and Alerting
It is the SAPu2019s new standard for central Monitoring and Alerting . The u201COldu201D System Monitoring work center based on central CCMS still available. You can do what you used to do with CCMS and also do even more with it, in a simpler way.
Best regards,
Guilherme
Edited by: Guilherme Balbinot on Oct 18, 2011 10:11 AM

Control Inspection Lot Generation

Hi Experts,
I have a requirement where I need to use Inspection Type 04 in 2 ways.
1) For FERT material types inspection lot should be generated automatically.
2) For HALB material types inspection lot should not be generated. The client will generate the inspection lot manually if he finds any problem with the lot.
A step by step guide to configure this in SAP System would be highly appreciated.
Thanks,
Rahul

I think you will have to use the user QPL10001 exit to suppress the HALB inspeciton lots. The coding shouldn't be hard as long as this iis consistent across the business. You'd simply suppress the lot for all HALB material types that are not manually created. (QALS-QSTAT01 is the field to detrermine if the lot was manually created or not). But as soon as one HALB anywhere in the business requires automatic inspection lots your user exit would get in the way.
So if you go this route, you might also want to create a new material type, something like "ZALB" that would allow automatic inspections. Another option is to use a special field like the cross-plant material status field if you aten't using it. Set up one code for inspection, and one for no inspections. Code the user exit accordingly.
Another option, which I don't know if you have considered, is to allow the automatic creation of your HALB 04 inspection lots. Just create them all as skip lots with posting directly to unrestricted inventory. That way, if a problem arises, you can go into the created inspection lot and use it, or if it has been processed already by the auto UD for skip lots, you can create a new 04 lot manuallly. This would require no development and is all standard SAP.
FF

Generation of Requirements Automatically

Similar Messages

Maybe you are looking for