Generation workbench

Hi all,
We have a problem. When a BDoc or a replication object is enhanced
and transported from Developement system to Test system the objects
are regenerated automatically. But when it transported to Production
system, the objects are not regenerated automatically.
This was evident when we found that none of the BDocs were successfully
processed by the flow. To solve, I ran the generation workbench
'gnrwb' for the bdoc which caused the problem and then the flow was
able to process the BDoc without errors successfully.
Is there some settings which are needed to be done to do automatic generation or should we do manually generation once the object is transported to the production system.
I would appreciate any help.
Thanks in advance
Jothi

Hi Michael,
The transaction 'genstatus' transaction shows many entries in errors with status "waiting". The error displayed is
H000000002HT B4EAD7BC8984DB48B5EDE28AA510AC30 PUBLI N T Check of item resulted in error.(If I select the row and press generate the error dissappears).
In publication table 'SMOHPUBL' the publications name is not used in any subscription.
My basic doubt is
1. Is the error displayed because there is no subscription linked with the publication.
2. Also how to find which is the background job executed for publication check.
3. Also how is this background job scheduled for generation check.
Some more information in detail is needed. Any idea...
Frédéric: The object change is not due to EEWB but due to creation of publications in the system.
Thanks in advance
Jothi

Similar Messages

MW generation error for SRV_WRITE after Upgrade to CRM 7.0

Iu2019m finishing up with the post-processing steps for the CRM 7.0 upgrade of our development system (from CRM 2007) and ran into an issue when re-generated the Middleware services before activating the MW.
Per the upgrade guide, I ran GN_START to start the generation, but the results in GENSTATUS show the below 8 errors. These errors are preventing me from activating MW, regardless of whether weu2019re actually using these services or not. I ran into this same issue in our Sandbox for the SRV_WRITE object and managed to resolve it there by generating some specific objects using the Generation Workbench (GNRWB), however the same approach has not worked for our Dev system. We have NOT implemented the Mobile CRM scenario, but are replicating BPs and Material with R/3, and have begun configuring the Server-based Groupware Integration which uses the Middleware framework and CDB.
/1CRMGC/SRV_WRITE_DEL:The data object "<FS_AFTERCDB0003>" does not have a component called "UPDATE_FLAG".
Could not determine module name: SRV_WRITE GENKEY: EXTRACT
Could not determine module name: SRV_WRITE GENKEY: REALIGN_GET_DEP_INT_OBJ<IND>
From what I can tell, SRV_WRITE is used somehow with Service Order replication?
Any suggestions for next steps to resolve these errors? Thanks for any input anyone can offer.

Thank you for the post. After comparison of Dev system with Sandbox, I think I am missing FM /1CRMGC/HTSRV_WRITE_RRX in Dev. However, when I try to generate in GNRWB using the below parameters, I am getting the errors below. How to proceed? Once again, thank you for your help!
GNRWB Generation:
Gen Group = RRLEX: Replication Extract
Industry = High tech
Rep Object = SRV_WRITE
Generator = EXTRACTWR
Generation Log:
No runtime object for generator REPLI_FLOW_FUGR and object SRV_WRITE registered in TGN_OBJREG
No runtime object for generator REPLI_FLOW_FUGR and object SRV_WRITE registered in TGN_OBJREG
thanks,
John

Error while generating objects in SMOGTOTAL

Hai All,
I tried to generate the industry specific objects in CRM through the transaction SMOGTOTAL. But when I check the status in SMWP, I found some of the objects were in errror status under replication objects per Industry and Publication objects per Industry.
When I check the log, it is showing some error, regarding function group .
In addition to this, some of the objects were missing and is also displayed in the log as error.
Also, even If I generate the error objects using the menu, it is showing an information message as "Generated" but the status remains unchanged.
Could you please let me know how to regenerate the error objects...
Thanks,
Jenibalet

Hello Jenibalet,
You can use generation workbench using txn:GNRWB to re-generate the FMs.
Could you check txn:SMOHQUEUE?Are you getting any error there?
If yes,then you need to generate the relevant function modules s in txn:GNRWB.
You need to select the appropriate Generator Group and Repository
Object Name in txn:GNRWB and for this you would get a clue from
errors in SMOHQUEUE.
Hope this helps!
Thanks and Best Regards,
Shanthala Kudva.

Problem with middleware adapter filters

Hi,
I need some help with R3AC1 filter configuration. I have my CRM 4.0 working fine with a previous initial download executed for CUSTOMER_MAIN business object (between others).
The problem is that now I have to download the related contact persons in ranges and I don't know how configure the filters to avoid deltas and the contact persons initial download at the same time.
I think in requests (R3AR2) but I have the same problem with filters.
Actually I have a filter in CUSTOMER_MAIN (and CUSTOMER_REL) object:
KNA1 LAND1 EQ ES Inclusive
If I want to download the contact persons related to customers 8000 to 9000, what's the filter configuration and in which object have I to do? It's very important that deltas continue downloading from my back-end because the system is productive.
I need urgent help. Could anyone help me please?
Best Regards
Javier

Have a look at transaction SMW3FDCUST, the activation is done there when checking the 'active' checkbox. For the download everything of BUPA_MAIN and BUPA_REL should be deassigned (as it usually is after an installation).
The transaction is also found in customizing under CRM->CRM Middleware->Mobile scenarios->Mapping (or similar) with the approproate help text there.
@Paul:What error do you get? Since sBDocs are not validated it should be only a technical error. Are you sure it is msa related (which then should be an error in the BDoc CAPGEN_OBJ_WRITE or CONGEN_OBJ_WRITE) or an error in the CDB adaptor framework (BDoc BUPA_MAIN or BUPA_REL). If the latter, it helps to regenerate all BDocs and related services in the generation workbench GNRWB for these BDocs.
Regards, Kai

Problem after change item status procedure in sales orders.

Hello experts,
I have changed item status procedure for sales orders. But now all BDoc with queue name CSA_ORDER_xxxxx remain in state 'Written to qRFC Queue (intermediate state)' and needs to be reprocessed manually.
No problem reprocessing.
Have somebody any idea ?
Best regards
Juan Salom

Hi,
Is your inbound queue un-registered(type U)? Look at trx.
SMQR
and see if it is in un-registered. If yes, select the CSA_ORDER_*** queue and click on
Registration
button.
If this does not help, re-generate your Bdoc services (for Bdoc BUS_TRANS_MSG) using
SMOGGEN
or
using the generation workbench.
Then try the delta once again and observe for queue and Bdoc status in the
SMW01
Hope it helps! Reward if helpful.
Regards,
Sudipta

Error during generation of the WSDL: BUILD FAILED java.lang.NoClassDefFoundError: com/sun/javadoc/Type

When I create an EJB Transport Business Service, after selecting the jar that has the EJB 2.1 artefacts (Remote, Home, etc) the oepe plugin fails and can't continue.
As I understand it seems that there is a problem with the classpath of ant build.xml that oepe creates inside folder /tmp/alsbejbtransport/ to compile the bs and generate the wsdl. I checked if tools.jar is in the classpath (in eclipse) and is included, so I can't figure out wich is the problem.
I found this in Oracle, but not helps solve the problem:
BEA-398120
Error: The WSDL for the typed transport endpoint could not be accessed.
Description
There was a problem retrieving the WSDL from the typed transport service endpoint at the time of service registration
Action
Contact technical support
This is the the full stacktrace that shows eclipse.
Generate : Error during generation of the WSDL:
BUILD FAILED
java.lang.NoClassDefFoundError: com/sun/javadoc/Type
 at com.bea.util.jam.provider.JamServiceFactoryImpl.createSourceBuilder(JamServiceFactoryImpl.java:205)
 at com.bea.util.jam.provider.JamServiceFactoryImpl.createBuilder(JamServiceFactoryImpl.java:158)
 at com.bea.util.jam.provider.JamServiceFactoryImpl.createClassLoader(JamServiceFactoryImpl.java:137)
 at com.bea.util.jam.provider.JamServiceFactoryImpl.createService(JamServiceFactoryImpl.java:78)
 at weblogic.wsee.util.JamUtil.parseSource(JamUtil.java:152)
 at weblogic.wsee.tools.anttasks.JwsLoader.loadJClasses(JwsLoader.java:186)
 at weblogic.wsee.tools.anttasks.JwsLoader.load(JwsLoader.java:75)
 at weblogic.wsee.tools.anttasks.JwsModule.loadWebServices(JwsModule.java:569)
 at weblogic.wsee.tools.anttasks.JwsModule.generate(JwsModule.java:369)
 at weblogic.wsee.tools.anttasks.JwsModule.build(JwsModule.java:256)
 at weblogic.wsee.tools.anttasks.JwscTask.execute(JwscTask.java:184)
 at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
 at sun.reflect.GeneratedMethodAccessor1.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
 at java.lang.reflect.Method.invoke(Method.java:601)
 at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
 at org.apache.tools.ant.Task.perform(Task.java:348)
 at org.apache.tools.ant.Target.execute(Target.java:357)
 at org.apache.tools.ant.Target.performTasks(Target.java:385)
 at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
 at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
 at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
 at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
 at org.apache.tools.ant.Main.runBuild(Main.java:758)
 at org.apache.tools.ant.Main.startAnt(Main.java:217)
 at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
 at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
Caused by: java.lang.ClassNotFoundException: com.sun.javadoc.Type
 at org.apache.tools.ant.AntClassLoader.findClassInComponents(AntClassLoader.java:1400)
 at org.apache.tools.ant.AntClassLoader.findClass(AntClassLoader.java:1341)
 at org.apache.tools.ant.AntClassLoader.loadClass(AntClassLoader.java:1088)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
 ... 27 more
Total time: 0 seconds
Eclipse Installation details:
*** System properties:
eclipse.application=org.eclipse.ui.ide.workbench
eclipse.buildId=M20110909-1335
eclipse.commands=-os
linux
-ws
gtk
-arch
x86_64
-showsplash
-launcher
{home}/Development/oepe-indigo/eclipse
-name
Eclipse
--launcher.library
{home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.100.v20110505/eclipse_1407.so
-startup
{home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar
--launcher.overrideVmargs
-exitdata
1e418010
-vm
/usr/bin/java
eclipse.home.location=file:{home}/Development/oepe-indigo/
eclipse.launcher={home}/Development/oepe-indigo/eclipse
eclipse.launcher.name=Eclipse
[email protected]/../p2/
eclipse.p2.profile=PlatformProfile
eclipse.product=org.eclipse.platform.ide
eclipse.startTime=1374623921455
eclipse.vm=/usr/bin/java
eclipse.vmargs=-Xms256m
-Xmx768m
-XX:MaxPermSize=512m
-Dsun.lang.ClassLoader.allowArraySyntax=true
-Dweblogic.home={home}/Oracle/Middleware/wlserver_10.3
-Dharvester.home={home}/Oracle/Middleware/Oracle_OSB1/harvester
-Dosb.home={home}/Oracle/Middleware/Oracle_OSB1
-Dosgi.bundlefile.limit=750
-Dosgi.nl=en_US
-Dmiddleware.home={home}/Oracle/Middleware
-jar
{home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar
equinox.use.ds=true
file.encoding=UTF-8
file.encoding.pkg=sun.io
file.separator=/
guice.disable.misplaced.annotation.check=true
harvester.home={home}/Oracle/Middleware/Oracle_OSB1/harvester
http.nonProxyHosts=localhost
java.awt.graphicsenv=sun.awt.X11GraphicsEnvironment
java.awt.printerjob=sun.print.PSPrinterJob
java.class.path={home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar
java.class.version=50.0
java.endorsed.dirs=/usr/lib/jvm/jdk1.6.0_45/jre/lib/endorsed
java.ext.dirs=/usr/lib/jvm/jdk1.6.0_45/jre/lib/ext:/usr/java/packages/lib/ext
java.home=/usr/lib/jvm/jdk1.6.0_45/jre
java.io.tmpdir=/tmp
java.library.path=/usr/lib/jvm/jdk1.6.0_45/jre/lib/amd64/server:/usr/lib/jvm/jdk1.6.0_45/jre/lib/amd64:/usr/lib/jvm/jdk1.6.0_45/jre/../lib/amd64:/usr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib
java.protocol.handler.pkgs=null|com.bea.wli.sb.resources.url|com.bea.wli.sb.resources.jca.upgrade.url|weblogic.utils|weblogic.utils|weblogic.utils|weblogic.net|weblogic.net
java.runtime.name=Java(TM) SE Runtime Environment
java.runtime.version=1.6.0_45-b06
java.specification.name=Java Platform API Specification
java.specification.vendor=Sun Microsystems Inc.
java.specification.version=1.6
java.vendor=Sun Microsystems Inc.
java.vendor.url=http://java.sun.com/
java.vendor.url.bug=http://java.sun.com/cgi-bin/bugreport.cgi
java.version=1.6.0_45
java.vm.info=mixed mode
java.vm.name=Java HotSpot(TM) 64-Bit Server VM
java.vm.specification.name=Java Virtual Machine Specification
java.vm.specification.vendor=Sun Microsystems Inc.
java.vm.specification.version=1.0
java.vm.vendor=Sun Microsystems Inc.
java.vm.version=20.45-b01
javax.rmi.CORBA.PortableRemoteObjectClass=weblogic.iiop.PortableRemoteObjectDelegateImpl
javax.rmi.CORBA.UtilClass=weblogic.iiop.UtilDelegateImpl
jna.platform.library.path=/usr/lib/x86_64-linux-gnu:/lib/x86_64-linux-gnu:/lib64:/usr/lib:/lib
line.separator=
middleware.home={home}/Oracle/Middleware
oracle.eclipse.tools.weblogic.ui.isWebLogicServer=true
org.apache.commons.logging.Log=org.apache.commons.logging.impl.NoOpLog
org.eclipse.equinox.launcher.splash.location={home}/Development/oepe-indigo/plugins/org.eclipse.platform_3.7.1.v201109091335/splash.bmp
org.eclipse.equinox.simpleconfigurator.configUrl=file:org.eclipse.equinox.simpleconfigurator/bundles.info
org.eclipse.m2e.log.dir={home}/workspace/pragma/.metadata/.plugins/org.eclipse.m2e.logback.configuration
org.eclipse.update.reconcile=false
org.omg.CORBA.ORBClass=weblogic.corba.orb.ORB
org.omg.CORBA.ORBSingletonClass=weblogic.corba.orb.ORB
org.osgi.framework.executionenvironment=OSGi/Minimum-1.0,OSGi/Minimum-1.1,OSGi/Minimum-1.2,JRE-1.1,J2SE-1.2,J2SE-1.3,J2SE-1.4,J2SE-1.5,JavaSE-1.6
org.osgi.framework.language=en
org.osgi.framework.os.name=Linux
org.osgi.framework.os.version=3.8.0
org.osgi.framework.processor=x86-64
org.osgi.framework.system.capabilities=osgi.ee; osgi.ee="OSGi/Minimum"; version:List<Version>="1.0, 1.1, 1.2",osgi.ee; osgi.ee="JavaSE"; version:List<Version>="1.0, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6"
org.osgi.framework.system.packages=javax.accessibility,javax.activation,javax.activity,javax.annotation,javax.annotation.processing,javax.crypto,javax.crypto.interfaces,javax.crypto.spec,javax.imageio,javax.imageio.event,javax.imageio.metadata,javax.imageio.plugins.bmp,javax.imageio.plugins.jpeg,javax.imageio.spi,javax.imageio.stream,javax.jws,javax.jws.soap,javax.lang.model,javax.lang.model.element,javax.lang.model.type,javax.lang.model.util,javax.management,javax.management.loading,javax.management.modelmbean,javax.management.monitor,javax.management.openmbean,javax.management.relation,javax.management.remote,javax.management.remote.rmi,javax.management.timer,javax.naming,javax.naming.directory,javax.naming.event,javax.naming.ldap,javax.naming.spi,javax.net,javax.net.ssl,javax.print,javax.print.attribute,javax.print.attribute.standard,javax.print.event,javax.rmi,javax.rmi.CORBA,javax.rmi.ssl,javax.script,javax.security.auth,javax.security.auth.callback,javax.security.auth.kerberos,javax.security.auth.login,javax.security.auth.spi,javax.security.auth.x500,javax.security.cert,javax.security.sasl,javax.sound.midi,javax.sound.midi.spi,javax.sound.sampled,javax.sound.sampled.spi,javax.sql,javax.sql.rowset,javax.sql.rowset.serial,javax.sql.rowset.spi,javax.swing,javax.swing.border,javax.swing.colorchooser,javax.swing.event,javax.swing.filechooser,javax.swing.plaf,javax.swing.plaf.basic,javax.swing.plaf.metal,javax.swing.plaf.multi,javax.swing.plaf.synth,javax.swing.table,javax.swing.text,javax.swing.text.html,javax.swing.text.html.parser,javax.swing.text.rtf,javax.swing.tree,javax.swing.undo,javax.tools,javax.transaction,javax.transaction.xa,javax.xml,javax.xml.bind,javax.xml.bind.annotation,javax.xml.bind.annotation.adapters,javax.xml.bind.attachment,javax.xml.bind.helpers,javax.xml.bind.util,javax.xml.crypto,javax.xml.crypto.dom,javax.xml.crypto.dsig,javax.xml.crypto.dsig.dom,javax.xml.crypto.dsig.keyinfo,javax.xml.crypto.dsig.spec,javax.xml.datatype,javax.xml.namespace,javax.xml.parsers,javax.xml.soap,javax.xml.stream,javax.xml.stream.events,javax.xml.stream.util,javax.xml.transform,javax.xml.transform.dom,javax.xml.transform.sax,javax.xml.transform.stax,javax.xml.transform.stream,javax.xml.validation,javax.xml.ws,javax.xml.ws.handler,javax.xml.ws.handler.soap,javax.xml.ws.http,javax.xml.ws.soap,javax.xml.ws.spi,javax.xml.ws.wsaddressing,javax.xml.xpath,org.ietf.jgss,org.omg.CORBA,org.omg.CORBA_2_3,org.omg.CORBA_2_3.portable,org.omg.CORBA.DynAnyPackage,org.omg.CORBA.ORBPackage,org.omg.CORBA.portable,org.omg.CORBA.TypeCodePackage,org.omg.CosNaming,org.omg.CosNaming.NamingContextExtPackage,org.omg.CosNaming.NamingContextPackage,org.omg.Dynamic,org.omg.DynamicAny,org.omg.DynamicAny.DynAnyFactoryPackage,org.omg.DynamicAny.DynAnyPackage,org.omg.IOP,org.omg.IOP.CodecFactoryPackage,org.omg.IOP.CodecPackage,org.omg.Messaging,org.omg.PortableInterceptor,org.omg.PortableInterceptor.ORBInitInfoPackage,org.omg.PortableServer,org.omg.PortableServer.CurrentPackage,org.omg.PortableServer.POAManagerPackage,org.omg.PortableServer.POAPackage,org.omg.PortableServer.portable,org.omg.PortableServer.ServantLocatorPackage,org.omg.SendingContext,org.omg.stub.java.rmi,org.w3c.dom,org.w3c.dom.bootstrap,org.w3c.dom.css,org.w3c.dom.events,org.w3c.dom.html,org.w3c.dom.ls,org.w3c.dom.ranges,org.w3c.dom.stylesheets,org.w3c.dom.traversal,org.w3c.dom.views,org.w3c.dom.xpath,org.xml.sax,org.xml.sax.ext,org.xml.sax.helpers
org.osgi.framework.uuid=901615cd-f3f3-0012-11b6-a3bca4d97ac1
org.osgi.framework.vendor=Eclipse
org.osgi.framework.version=1.6.0
org.osgi.supports.framework.extension=true
org.osgi.supports.framework.fragment=true
org.osgi.supports.framework.requirebundle=true
os.arch=amd64
os.name=Linux
os.version=3.8.0-26-generic
osb.home={home}/Oracle/Middleware/Oracle_OSB1
osgi.arch=x86_64
osgi.bundlefile.limit=750
osgi.bundles=reference:file:javax.transaction_1.1.1.v201105210645.jar,reference:file:org.eclipse.equinox.simpleconfigurator_1.0.200.v20110502-1955.jar@1:start
osgi.bundles.defaultStartLevel=4
osgi.bundlestore={home}/Development/oepe-indigo/configuration/org.eclipse.osgi/bundles
osgi.configuration.area=file:{home}/Development/oepe-indigo/configuration/
osgi.framework=file:{home}/Development/oepe-indigo/plugins/org.eclipse.osgi_3.7.1.R37x_v20110808-1106.jar
osgi.framework.extensions=reference:file:javax.transaction_1.1.1.v201105210645.jar
osgi.framework.shape=jar
osgi.framework.version=3.7.1.R37x_v20110808-1106
osgi.frameworkClassPath=., file:{home}/Development/oepe-indigo/plugins/javax.transaction_1.1.1.v201105210645.jar
osgi.install.area=file:{home}/Development/oepe-indigo/
osgi.instance.area=file:{home}/workspace/pragma/
osgi.instance.area.default=file:{home}/workspace/
osgi.logfile={home}/workspace/pragma/.metadata/.log
osgi.manifest.cache={home}/Development/oepe-indigo/configuration/org.eclipse.osgi/manifests
osgi.nl=en_US
osgi.nl.user=en_US
osgi.os=linux
osgi.splashLocation={home}/Development/oepe-indigo/plugins/org.eclipse.platform_3.7.1.v201109091335/splash.bmp
osgi.splashPath=platform:/base/plugins/org.eclipse.platform
osgi.syspath={home}/Development/oepe-indigo/plugins
osgi.tracefile={home}/workspace/pragma/.metadata/trace.log
osgi.ws=gtk
path.separator=:
securerandom.source=file:/dev/./urandom
socksNonProxyHost=localhost
sun.arch.data.model=64
sun.boot.class.path=/usr/lib/jvm/jdk1.6.0_45/jre/lib/resources.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/rt.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/sunrsasign.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/jsse.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/jce.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/charsets.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/modules/jdk.boot.jar:/usr/lib/jvm/jdk1.6.0_45/jre/classes
sun.boot.library.path=/usr/lib/jvm/jdk1.6.0_45/jre/lib/amd64
sun.cpu.endian=little
sun.cpu.isalist=
sun.desktop=gnome
sun.io.unicode.encoding=UnicodeLittle
sun.java.command={home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar -os linux -ws gtk -arch x86_64 -showsplash -launcher {home}/Development/oepe-indigo/eclipse -name Eclipse --launcher.library {home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.100.v20110505/eclipse_1407.so -startup {home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar --launcher.overrideVmargs -exitdata 1e418010 -vm /usr/bin/java -vmargs -Xms256m -Xmx768m -XX:MaxPermSize=512m -Dsun.lang.ClassLoader.allowArraySyntax=true -Dweblogic.home={home}/Oracle/Middleware/wlserver_10.3 -Dharvester.home={home}/Oracle/Middleware/Oracle_OSB1/harvester -Dosb.home={home}/Oracle/Middleware/Oracle_OSB1 -Dosgi.bundlefile.limit=750 -Dosgi.nl=en_US -Dmiddleware.home={home}/Oracle/Middleware -jar {home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar
sun.java.launcher=SUN_STANDARD
sun.jnu.encoding=UTF-8
sun.lang.ClassLoader.allowArraySyntax=true
sun.management.compiler=HotSpot 64-Bit Tiered Compilers
sun.os.patch.level=unknown
svnkit.http.methods=Basic
svnkit.library.gnome-keyring.enabled=false
user.country=AR
user.dir={home}/Development/oepe-indigo
user.home={home}
user.language=es
user.name={username}
user.timezone=America/Argentina/Buenos_Aires
weblogic.home={home}/Oracle/Middleware/wlserver_10.3
Thanks!!

run this one in command prompt and then convert the applet using converter tool
JC_HOME = C:\java_card_kit-2_2_2\bin\
set CLASSES=%JCHOME%\lib\apduio.jar;%JC_HOME%\lib\apdutool.jar;%JC_HOME%\lib\jcwde.jar;%JC_HOME%\lib\converter.jar;%JC_HOME%\lib\scriptgen.jar;%JC_HOME%\lib\offcardverifier.jar;%JC_HOME%\lib\api.jar;%JC_HOME%\lib\installer.jar;%JC_HOME%\lib\capdump.jar;
D:\NareshPalle\jcardRE\Smart\src>java -classpath %_CLASSES% com.sun.javacard.con
verter.Converter -out EXP JCA CAP -exportpath .\exp -applet 0x0a:0x00:0x00:0x00:0x0e:0x01:0x02:
0x03:0x04:0x05:0x06 PackageName appletName 0x01:0x02:0x03:0x04:0x05:0x0
6:0x07:0x08 1.0
or
go to following directory and run the converter tool in command prompt
step 1: cd C:\java_card_kit-2_2_2\bin\
then run this command under the above directory
step 2:converter -classdir E:\Pathof Your applet class file -out EXP JCA CAP -exportpath E:\path of exp files folder -applet AID PackageName AppletName PackAID major.minor no
For more doubts mail me....
*[removed by moderator]*
Thanks and Regards
NareshPalle
Edited by: EJP on 31/03/2012 20:09: removed your email address. Unless you like spam and unless you think these forums are provided for your personal benefit only, posting an email address here serves no useful purpose whatsoever.

Problem with Runtime Workbench and with sending data from XI to SLD

Hello 
 
Could I have a little help, a hint in the two following topics: 
 
1. I run Runtime Workbench -> Component Monitoring -> Display All and I get this error: 
 
Error during communication with System Landscape Directory: User credentials are invalid or user is denied access 
 
In filesystem log I can find like this: 
 
XIRWB.com.sap.aii.mdt.frames.jsp_error [SAPEngine_Application_Thread[impl:3]_40] Fatal: Error during communication with System Landscape Directory: User credentials are invalid or user is denied access 
Thrown: 
MESSAGE ID: com.sap.aii.rwb.agent.server.rb_LCRAgent.landscapeCommunicationError 
com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: User credentials are invalid or user is denied access
 at com.sap.aii.rwb.agent.server.SLDAgentBean.convertException(SLDAgentBean.java:1472)
 at com.sap.aii.rwb.agent.server.SLDAgentBean.buildSLD(SLDAgentBean.java:773)
 at com.sap.aii.rwb.agent.server.SLDAgentBean.provideSld(SLDAgentBean.java:269)
 at com.sap.aii.rwb.agent.server.SLDAgentBean.getXIDomain(SLDAgentBean.java:711)
 at com.sap.aii.rwb.agent.api.SLDAgentObjectImpl0_0.getXIDomain(SLDAgentObjectImpl0_0.java:375)
 at com.sap.aii.rwb.agent.api.SLDAgent_Stub.getXIDomain(SLDAgent_Stub.java:436)
 at com.sap.aii.rwb.agent.client.EJBAgent.getXIDomain(EJBAgent.java:255)
 at com.sap.aii.rwb.util.web.model.AppMainModel.getSelectedDomain(AppMainModel.java:138)
 at com.sap.aii.rwb.util.web.model.DomainRep.build(DomainRep.java:121)
 at com.sap.aii.rwb.web.componentmonitoring.model.ObjectIdentificationTree.getComponentTree(ObjectIdentificationTree.java:117) 
 at jsp_component_monitoring1321125174985._jspService(jsp_component_monitoring1321125174985.java:217)
 at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
 at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
 at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
 at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doGet(CmPageProcessor.java:27)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
 at jsp_FC_Secure1321125169379._jspService(jsp_FC_Secure1321125169379.java:24)
 at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(AccessController.java:219)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) 
Root cause: 
com.sap.lcr.api.cimclient.UnauthorizedUserException: User credentials are invalid or user is denied access 
 at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:577)
 at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:341)
 at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:280)
 at com.sap.lcr.api.cimclient.CIMOMClient.performBatchOperation(CIMOMClient.java:1251)
 at com.sap.lcr.api.cimclient.CIMClient.performBatchOperation(CIMClient.java:2268)
 at com.sap.aii.utilxi.sld.MRSldProxy.stage1(MRSldProxy.java:989)
 at com.sap.aii.utilxi.sld.MRSldProxy.loadComponents(MRSldProxy.java:918)
 at com.sap.aii.utilxi.sld.MRSldProxy.loadSld(MRSldProxy.java:907)
 at com.sap.aii.utilxi.sld.SubSystemFactory.createSldFromSld(SubSystemFactory.java:373)
 at com.sap.aii.utilxi.sld.SubSystemFactory.createSldFromSld(SubSystemFactory.java:434)
 at com.sap.aii.rwb.agent.server.SLDAgentBean.buildSLD(SLDAgentBean.java:764)
 at com.sap.aii.rwb.agent.server.SLDAgentBean.provideSld(SLDAgentBean.java:269)
 at com.sap.aii.rwb.agent.server.SLDAgentBean.getXIDomain(SLDAgentBean.java:711)
 at com.sap.aii.rwb.agent.api.SLDAgentObjectImpl0_0.getXIDomain(SLDAgentObjectImpl0_0.java:375)
 at com.sap.aii.rwb.agent.api.SLDAgent_Stub.getXIDomain(SLDAgent_Stub.java:436)
 at com.sap.aii.rwb.agent.client.EJBAgent.getXIDomain(EJBAgent.java:255)
 at com.sap.aii.rwb.util.web.model.AppMainModel.getSelectedDomain(AppMainModel.java:138)
 at com.sap.aii.rwb.util.web.model.DomainRep.build(DomainRep.java:121)
 at com.sap.aii.rwb.web.componentmonitoring.model.ObjectIdentificationTree.getComponentTree(ObjectIdentificationTree.java:117)
 at jsp_component_monitoring1321125174985._jspService(jsp_component_monitoring1321125174985.java:217)
 at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
 at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
 at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
 at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doGet(CmPageProcessor.java:27)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
 at jsp_FC_Secure1321125169379._jspService(jsp_FC_Secure1321125169379.java:24)
 at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(AccessController.java:219)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
 
 
 
I don't know what is wrong. 
I have configured: 
- SLDCHECK work properly, 
- none of the users PI* type not lock, 
- password to the PI* users in exchangeProfile entered correctly, 
- In VA in the JCo RFC Provider I have properly configure: AI_RUNTIME_JCOSERVER, LCRSAPRFC, SAPSLDAPI_SID - from the ABAP I can connect to this programs ID 
- In VA in SLD Data Supplier I have properly configure bookmarks HTTP Settings and CIM Client Generation Settings. CIMClient Test is OK 
 
I do not know what else I can see, what else I have properly configured ... I looked at the notes:: 936093 jak i 721548... 
 
 
2. I can't send data from XI to SLD, ie makes me a system definition in Web As Abap and Web as Java but nothing appear to me in Exchange Infrastructure. Exchange Infrastructure is empty - what is wrong?? 
I carried out the recommendation by 764176 and 1031321 notes 
 
I restart below applications (no effect)... 
com.sap.xi.directory (Integration Builder/Configuration) 
com.sap.aii.af.app (Adapter Engine) 
com.sap.xi.rwb (Runtime Workbench) 
com.sap.xi.repository (Integration Builder/Design) 
 
Can I ask for help and guidance in these topics? 
 
Regards 
RP 

I increased logging in the NWA (Configuration -> Log Configuration) - and increased the some things here to log ALL. So that from the NWA (Monitoring -> Logs and Traces) I see a little more information (but does not follow that with which the user is a problem). 
 
Here are some interesting logs ... 
I was most rash or irritation of those that say about the lack of credentials u2013 I must use Viusal Administrator and set good service ... 
 
What do I have done: 
In the Visual Administrator -> Cluster -> Server -> Services -> SLD Data Supplier 
I have set in the HTTP Settings tab the host and port SLD, the user name and password is also entered as it is in the SLD. To be sure, already have set for the user entered here such roles as: 
SAP_SLD_ADMINISTRATOR 
SAP_SLD_CONFIGURATOR 
SAP_SLD_DEVELOPER 
SAP_SLD_GUEST 
SAP_SLD_ORGANIZER 
Maybe we are talking in this place about a different user? 
 
Similarly, when it comes to tab CIM Client Generation Settings - here's all the same thing done. CIMClient test shows that everything is OK. 
When I click the button: This trigger the transfer of data to the SLD gets the message that everything was shipped correctly. Indeed, I received an instance of JAVA in SLD 
Also clicked on this icon: Assign application roles to user group - got information that everything is attached properly. 
 
By ABAP side, the connections: INTEGRATION_DIRECTORY_HMI, SAPSLDAPI, LCRSAPRFC, AI_RUNTIME_JCOSERVER and AI_DIRECTORY_JCOSERVER work correctly, ie I can perform the test - which means that programs ID are properly positioned in JCO Provider in VA. 
 
Puzzling is this message: 
The SLD data is inconsistent. 
 
Strange also that the message (from the ABAP everything is available in SMGW no errors): 
Connect to SAP gateway failed 
 
And what is this error: 
 
could not sync ExchangeProfile: 
Thrown: 
com.sap.rprof.dbprofiles.DBException: Connect to SAP gateway failed 
Connect_PM TYPE=A ASHOST=saptest2 SYSNR=60 GWHOST=saptest2 GWSERV=sapgw60 PCS=1 
 
LOCATION CPIC (TCP/IP) on local host with Unicode 
ERROR partner 'saptest2:sapgw60' not reached 
TIME Thu Feb 23 07:28:07 201 
RELEASE 700 
COMPONENT NI (network interface) 
VERSION 38 
RC -10 
MODULE nixxi.cpp 
LINE 2513 
DETAIL NiPConnect 
SYSTEM CALL connect 
ERRNO 79 
ERRNO TEXT A remote host refused an attempted connect operation. 
COUNTER 2 
 
 
Below is a list of some interesting logs ... 
 
########### 
 
Insufficient permissions for getting SLD access information. You can add permissions for your application via the SLD service in the 'Visual Administrator'. 
 
############# 
 
SLD is not accessible. Check SLD Data Supplier service settings. 
 
########### 
 
"Warning","2012-02-22","07:53:50:986","Data get on com.sap.sldserv.data.GetSAPBCCentralServiceInstance class processing failed. htThe SLD data is inconsistent. This is an internal processing problem.","/System/Server/SLDService","com.sap.sldserv.DataCollector","n/a","saptest2","Server 0 60_36694", 
 
######### 
 
com.sap.lcr.api.cimclient.UnauthorizedUserException: User credentials are invalid or user is denied access 
 
################ 
 
Full Message Text
CPA Cache not updated with directory data, due to: Couldn't open Directory URL (http://saptest2.unx.era.pl:56000/dir/hmi_cache_refresh_service/ext?method=CacheRefresh&mode=C&consumer=af.xit.saptest2), due to: HTTP 503: Service Unavailable
 
################## 
 
Full Message Text 
 
could not sync ExchangeProfile: 
Thrown: 
com.sap.rprof.dbprofiles.DBException: Connect to SAP gateway failed 
Connect_PM TYPE=A ASHOST=saptest2 SYSNR=60 GWHOST=saptest2 GWSERV=sapgw60 PCS=1 
 
LOCATION CPIC (TCP/IP) on local host with Unicode 
ERROR partner 'saptest2:sapgw60' not reached 
TIME Thu Feb 23 07:28:07 201 
RELEASE 700 
COMPONENT NI (network interface) 
VERSION 38 
RC -10 
MODULE nixxi.cpp 
LINE 2513 
DETAIL NiPConnect 
SYSTEM CALL connect 
ERRNO 79 
ERRNO TEXT A remote host refused an attempted connect operation. 
COUNTER 2 
 
Connect_PM TYPE=A ASHOST=saptest2 SYSNR=60 GWHOST=saptest2 GWSERV=sapgw60 PCS=1 
 
LOCATION CPIC (TCP/IP) on local host with Unicode 
ERROR partner 'saptest2:sapgw60' not reached 
TIME Thu Feb 23 07:28:07 201 
RELEASE 700 
COMPONENT NI (network interface) 
VERSION 38 
RC -10 
MODULE nixxi.cpp 
LINE 2513 
DETAIL NiPConnect 
SYSTEM CALL connect 
ERRNO 79 
ERRNO TEXT A remote host refused an attempted connect operation. 
COUNTER 2 
 
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:457) 
at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1015) 
at com.sap.mw.jco.JCO$Client.connect(JCO.java:3238) 
at com.sap.rprof.dbprofiles.DBProfiles.getProfile(DBProfiles.java:101) 
at com.sap.rprof.dbprofiles.RemoteProfile.readRemoteProfileFromMedia(RemoteProfile.java:1288) 
at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfileFromFactory(RemoteProfile.java:195) 
at com.sap.aii.utilxi.prop.rprof.ExchangeProfilePropertySource.readProfile(ExchangeProfilePropertySource.java:177) 
at com.sap.aii.utilxi.prop.rprof.ExchangeProfilePropertySource.sync(ExchangeProfilePropertySource.java:165) 
at com.sap.aii.utilxi.misc.api.AIIProperties.sync(AIIProperties.java:582) 
at com.sap.aii.af.service.sld.SLDAccess.syncExchangeProfile(SLDAccess.java:43) 
at com.sap.aii.adapter.xi.ms.SLDReader.fire(SLDReader.java:52) 
at com.sap.aii.adapter.xi.ms.SLDReader.run(SLDReader.java:167) 
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) 
at java.security.AccessController.doPrivileged(AccessController.java:219) 
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) 
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) 
 
############## 
 
Full Message Text 
 
Import of software component version list from component repository failed 
Thrown: 
com.sap.lcr.api.cimclient.LcrException: User credentials are invalid or user is denied access 
at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:577) 
at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:341) 
at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:198) 
at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:146) 
at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstancesImpl(CIMOMClient.java:443) 
at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstances(CIMOMClient.java:747) 
at com.sap.lcr.api.cimclient.CIMClient.enumerateInstances(CIMClient.java:980) 
at com.sap.lcr.api.sapmodel.JavaCIMObjectAccessor.enumerateInstances(JavaCIMObjectAccessor.java:211) 
at com.sap.lcr.api.sapmodel.SAP_SoftwareComponentAccessor.enumerateInstances(SAP_SoftwareComponentAccessor.java:204) 
at com.sap.lcr.api.sapmodel.SAP_SoftwareComponentAccessor.enumerateSAP_SoftwareComponentInstances(SAP_SoftwareComponentAccessor.java:239) 
at com.sap.aii.ibrep.server.sldaccess.interfaces.CRAccess.getSwcLinks(CRAccess.java:82) 
at com.sap.aii.ibrep.server.extobjects.SwcAccessor.getEoLinks(SwcAccessor.java:59) 
at com.sap.aii.ib.server.extobjects.EOAServiceImpl.getEoLinks(EOAServiceImpl.java:75) 
at com.sap.aii.ib.sbeans.extobjects.EOAServiceBean.getEoLinks(EOAServiceBean.java:66) 
at com.sap.aii.ib.sbeans.extobjects.EOAServiceRemoteObjectImpl1_0.getEoLinks(EOAServiceRemoteObjectImpl1_0.java:527) 
at com.sap.aii.ib.sbeans.extobjects.EOAServiceRemoteObjectImpl1_0p4_Skel.dispatch(EOAServiceRemoteObjectImpl1_0p4_Skel.java:232) 
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) 
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) 
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) 
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) 
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) 
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) 
at java.security.AccessController.doPrivileged(AccessController.java:219) 
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) 
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) 
 
############## 
 
Full Message Text 
 
An exception was thrown in the UME/ABAP user management connector. Message: Connect to SAP gateway failed 
Connect_PM TYPE=A ASHOST=localhost SYSNR=60 GWHOST=localhost GWSERV=sapgw60 PCS=1 
 
LOCATION CPIC (TCP/IP) on local host with Unicode 
ERROR partner '127.0.0.1:sapgw60' not reached 
TIME Thu Feb 23 07:28:06 201 
RELEASE 700 
COMPONENT NI (network interface) 
VERSION 38 
RC -10 
MODULE nixxi.cpp 
LINE 2513 
DETAIL NiPConnect 
SYSTEM CALL connect 
ERRNO 79 
ERRNO TEXT A remote host refused an attempted connect operation. 
COUNTER 16

Error in template generation...

Hi,
I´m doing an app, but when i click in apply template under the component controller, appear this error:
     Status ERROR
Plugin : com.sap.ide.metamodel.common.services.eclipse
code=0
Internal error
   Plugin name: Metamodel Common Services for Eclipse
   Internal error : com.sap.ide.metamodel.common.services.eclipse
   Class      : com.sap.ide.mmservices.common.eclipse.internal.template.apply.ApplyTemplateWizard$1
   Method     : performFinish()
   Message    : Error in template generation
   Exception : java.lang.NullPointerException: null
java.lang.NullPointerException
at com.sap.tc.mobile.wdlite.ide.servicetemplate.generation.GeneratorHelper.insertCodeInController(GeneratorHelper.java:87)
at com.sap.tc.mobile.wdlite.ide.servicetemplate.generation.GeneratorHelper.insertCodeInMethod(GeneratorHelper.java:80)
at com.sap.tc.mobile.wdlite.ide.servicetemplate.generation.ServiceTemplateGeneration.generateCoding(ServiceTemplateGeneration.java:197)
at com.sap.ide.mmservices.common.eclipse.internal.template.generation.GenerationStartup.generateFragments(GenerationStartup.java:246)
at com.sap.ide.mmservices.common.eclipse.internal.template.generation.GenerationStartup.generate(GenerationStartup.java:87)
at com.sap.ide.mmservices.common.eclipse.internal.template.apply.ApplyTemplateWizard$1.run(ApplyTemplateWizard.java:65)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:67)
at com.sap.ide.mmservices.common.eclipse.internal.template.apply.ApplyTemplateWizard.performFinish(ApplyTemplateWizard.java:62)
at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:742)
at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:373)
at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:616)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:227)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:820)
at org.eclipse.jface.window.Window.open(Window.java:796)
at com.sap.ide.mmservices.common.eclipse.template.actions.ApplyTemplateAction.run(ApplyTemplateAction.java:28)
at com.sap.ide.mmservices.common.eclipse.template.TemplateInvoker.startApplyTemplateAction(TemplateInvoker.java:78)
at com.sap.ide.mmservices.common.eclipse.template.TemplateInvoker.startApplyTemplateWizard(TemplateInvoker.java:34)
at com.sap.ide.webdynpro.wdexplorer.actions.other.ApplyTemplateAction.run(ApplyTemplateAction.java:48)
at com.sap.ide.tools.core.viewerfwk.internal.actions.BaseDelegateSingleAction.runInternal(BaseDelegateSingleAction.java:65)
at com.sap.ide.tools.core.viewerfwk.internal.actions.BaseDelegateSingleAction.run(BaseDelegateSingleAction.java:58)
at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:256)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:545)
at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:490)
at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:402)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2389)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2219)
at org.eclipse.ui.internal.Workbench$4.run(Workbench.java:466)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:289)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:461)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:106)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:153)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:106)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:76)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:504)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:443)
at org.eclipse.equinox.launcher.Main.run(Main.java:1169)
at org.eclipse.equinox.launcher.Main.main(Main.java:1144)
What happend?
Too, appear this error when i try to import the data object:
Could be anything bad install?
Thanks in advance,
Regards,

Hi Victor,
it seems you have a general problem in the way you create your data model. Actually from this point I can not say what is wrong- but if I take all your problems together, you have done something wrong in the creation already - and so the import fails. Check your model prior to import please.
Regards,
Oliver

Document Generation Wizard - disregard picked Items for Delivery Notes

Hi,
We have a requirement from a customer whereby when they are creating Delivery Notes from Sales Orders via the Document Generation Wizard to exclude quantities of Items which have been picked on the Sales Order already.
E.g. Sales Order, Product XXXX for Qty 10.
Qty 5 has been Picked.
Document Generation Wizard is run with an option to create Delivery Note from Sales Order for qty 5 of XXXX
Thanks,
Caroline

Here is the other solution:
1. Using the draft document generator, you can generate 1 time all the invoices like draft, then you can write a query to display this invoices , then you ca put this query in the alert management to generate the report with this invoices montly when you want.....then you create the invoices that you want, this option is semi-automatic and can work good if you don't have a lot of invoices...
2. using Data tranfer workbench, you can configure a excel template with all the invoices ready to migrate to SBO with the DTW, also you can make a alert in SBO in order to make this activity in a day montly....this is more automatic.
3.writing "Simply" SDK project to generate this invoices... using the oinvoice SBO object to create automaticaly all the invoices that you want....you can use the draft table information in order to generate this invoices using SDK.
The 3 solutions above are meant to resolve problem relate to auto invoice process, you can think about it.
Rgds,

How to generate a MSDS report from status GP (Generation possible) to RE

Hi EHS Goeroes,
I'm struggling with the Generation of the MSDS. I have done the following procedure and settings:
a) Create MSDS report (CG42)
b) Edit Generation Variant (CG2B)
Settings:
(I have assigned my template to the Generation Variant)
Generate manual request automatically: marked
Change Marks: 0
Initial release status: RE (released)
Version requirement: unmarked
Set historical automatically: unmarked
c) EHS > Specification Workbench > Report from Template (to test the design - display is correct and all phrases can be found)
d) EHS > Specification Workbench > Create new report
(report has been created succesfully and appears in Report Management).
e) EHS > Specification Workbench > Report Management:
MSDS_29 Material Safety Data Sheet for China World
Chinese Not Relevant Generation Poss. => generation possible.
Feedback affter clicking on Accept: You tried to carry out action 'Accept' on a report with status GP. However, this action is not allowed for reports with this status.
Feedback after clicking on Generate: You tried to carry out action 'Generate' on a report with status GP. However, this action is not allowed for reports with this status.
d) SE38 I have no jobs scheduled yet, so I run the following two programs to start the worklist manually, RC1AVGE1 and RC1AVGE2.
RC1AVGE1 - gave allot of feedback information regarding to changes and so on (first time I run it).
RC1AVGE2 - feedback: EHS: 'Worklist Generation for Reports - Selection for Check. - 0 reports to be checked were found'
From my understanding program RC1AVGE2 - should generate the MSDS.
e) WWI - monitor display (CG5Z):
100 @03\QNo background processes in client@ 5 SBR WWI-00000000000000000002 FREE RMDERKS
110 @03\QNo background processes in client@ 5 SBR WWI-00000000000000000063 FREE A132645
xxx SV001 @5B\QWWI server is active@ @02\QNo background processes on WWI server@
xxx SV003 @5C\QWWI server is inactive@ @02\QNo background processes on WWI server@
I checked if I had any jobs running in the background or has been finished, but it seems like it goes wrong here, the system does not generate a job for the generation of the MSDS_29. To be able to get the status of MSDS_29 to RE (Released).
Does anybody has an idea what I do wrong, or which settings might be incorrect? Futhermore, what are the further steps to issue the report in the SD module - report shipping?
Help is much appreciated!
Roy Derks

Hi Roy,
Check and activate the QWWI server for the second job wwi - 110. Try once to generate the MSDS.
I will revert back if i get information.
regards,
mahesh.

ABAP Workbench in SAP R/3

Can any one give me shot description?
ABAP in the SAP R/3 System.
Architecture of SAP R/3 Applications.
Database Layer.
Application Layer.
Presentation Layer.
Work Processes.
Work Processes.
Screen Processor.
ABAP Processor.
Types of Work Process.
Program Flow and Program Types.
Flow of ABAP Programs.
Executable Programs.
Non-Executable Programs
thanks,
Krishna

Hi
Work processes:
the actual Place where the ABAP work is done
there are following work processes:
DIALOG,UPDATE, SPOOL, BACKGROUND, ENQUE/DEQUE,MESSAGE etc
See this
ABAP FAQ:
1. How data is stored in cluster table?
Each field of cluster table behaves as tables which contains the no. of entries.
2. What are client dependant objects in abap/sap?
SAP Script layout, text element, and some DDIC objects.
3. On which even we can validate the input fields in module progams?
In PAI (Write field statement on field you want to validate, if you want to validate group of fields put in chain and End chain statement.)
4. In selection screen I have three fields, plant mat no and material group. If I input plant how do I get the mat no and material group based on plant dynamically?
AT SELECTION-SCREEN ON VALUE-REQUEST FOR MATERIAL.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST' to get material and material group for the plant.
5. How do you get output from IDOC?
Data in IDOc is stored in segments, the output from Idoc is obtained by reading the data stored in its respective segments.
6. When top of the page event is triggered?
After excuteing first write statement in start-of-selection event.
7. Can we create field without data element and how?
In SE11 one option is available above the fields strip. Data element/ direct type.
8. How do we debug sapscript?
Go to SE71 give lay set name , go to utilities select debugger mode on.
9. Which transaction code can I used to analyze the performance of ABAP program.
TCode AL21.
10. How can I copy a standard table to make my own z_table.
Go to transaction SE11. Then there is one option to copy table. Press that button. Enter the name of the standard table and in the Target table enter Z table name and press enter.
Following are some of the answers which I gave upto my knowledge.
1. What is the use of 'outerjoin'
Ans. With the use of outer join you can join the tables even there is no entry in all the tables used in the view.
In case of inner join there should be an entry in al the tables use in the view.
2. When to use logical database?
Ans. Advantage of Logical databases:
less coding s required to retrieve data compared to normal internel tables.
Tables used LDB are in hierarchial structure.
3. What is the use of 'table index'?
Ans .Index is used for faster access of data base tables.
4. What is the use of 'FOR ALL ENTRIES'?
Ans. To avoid nested select statements we use SELECT FOR ALL ENTRIES statement.
If there r more than 10000 records SELECT FOR ALL ENTRIES is used.
Performance wise SELECT FOR ALL ENTRIES is better to use.
5. Can you set up background processing using CALL TRANSACTION?
Yes,Using No Screen Mode.
6. What are table buffers?
Table buffers reside locally on each application server in the system. The data of buffered tables can thus be accessed
directly from the buffer of the application server. This avoids the time-consuming process of accessing the database.
Buffering is useful if table needs to be accessed more no. of times in a program.
ABAP Technical Interview Questions:
1. What is the typical structure of an ABAP program?
2. What are field symbols and field groups.? Have you used "component idx of structure" clause with field groups?
3. What should be the approach for writing a BDC program?
4. What is a batch input session?
5. What is the alternative to batch input session?
6. A situation: An ABAP program creates a batch input session. We need to submit the program and the batch session in background. How to do it?
7. What is the difference between a pool table and a transparent table and how they are stored at the database level?
8. What are the problems in processing batch input sessions? How is batch input process different from processing on line?
9. What do you define in the domain and data element?
10. What are the different types of data dictionary objects?
11. How many types of tables exist and what are they in data dictionary?
12. What is the step-by-step process to create a table in data dictionary?
13. Can a transparent table exist in data dictionary but not in the database physically?
14. What are the domains and data elements?
15. Can you create a table with fields not referring to data elements?
16. What is the advantage of structures? How do you use them in the ABAP programs?
17. What does an extract statement do in the ABAP program?
18. What is a collect statement? How is it different from append?
19. What is open sql vs native sql?
20. What does an EXEC SQL stmt do in ABAP? What is the disadvantage of using it?
21. What is the meaning of ABAP editor integrated with ABAP data dictionary?
22. What are the events in ABAP language?
23. What is an interactive report? What is the obvious diff of such report compared with classical type reports?
24. What is a drill down report?
25. How do you write a function module in SAP? Describe.
26. What are the exceptions in function module?
27. What is a function group?
28. How are the date abd time field values stored in SAP?
29. What are the fields in a BDC_Tab Table?
30. Name a few data dictionary objects?
31. What happens when a table is activated in DD?
32. What is a check table and what is a value table?
33. What are match codes? Describe?
34. What transactions do you use for data analysis?
35. What is table maintenance generator?
36. What are ranges? What are number ranges?
37. What are select options and what is the diff from parameters?
38. How do you validate the selection criteria of a report? And how do you display initial values in a selection screen?
39. What are selection texts?
40. What is CTS and what do you know about it?
41. When a program is created and need to be transported to prodn does selection texts always go with it? if not how do you make sure? Can you change the CTS entries? How do you do it?
42. What is the client concept in SAP? What is the meaning of client independent?
43. Are programs client dependent?
44. Name a few system global variables you can use in ABAP programs?
45. What are internal tables? How do you get the number of lines in an internal table? How to use a specific number occurs statement?
46. How do you take care of performance issues in your ABAP programs?
47. What are datasets?
48. How to find the return code of a stmt in ABAP programs?
49. What are interface/conversion programs in SAP?
50. Have you used SAP supplied programs to load master data?
2. Adapted from response by Maram Roja on Tuesday, June 15, 2004
1. What are the techniques involved in using SAP supplied programs? Do you prefer to write your own programs to load master data? Why?
2. What are logical databases? What are the advantages/disadvantages of logical databases?
3. What specific statements do you using when writing a drill down report?
4. What are different tools to report data in SAP? What all have you used?
5. What are the advantages and disadvantages of ABAP query tool?
6. What are the functional areas? User groups? How does ABAP query work in relation to these?
7. Is a logical database a requirement/must to write an ABAP query?
8. What is the structure of a BDC sessions.
9. What are Change header/detail tables? Have you used them?
10. What do you do when the system crashes in the middle of a BDC batch session?
11. What do you do with errors in BDC batch sessions?
12. How do you set up background jobs in SAP? What are the steps? What are the event driven batch jobs?
13. Is it possible to run host command from SAP environment? How do you run?
14. What kind of financial periods exist in SAP? What is the relevant table for that?
15. Does SAP handle multiple currencies? Multiple languages?
16. What is a currency factoring technique?
17. How do you document ABAP programs? Do you use program documentation menu option?
18. What is SAPscript and layout set?
19. What are the ABAP commands that link to a layout set?
20. What is output determination?
ABAP Interview Questions
1.Without using Tcode SE11, How can we enter the values in to the table???
2.What is the difference between Collect statement and Append Statement???
3.What do you mean by correction and Transportation system???
4.What is the difference between User Exits and BADI????
5.How can we identify User exits in our screen???
6.What do you mean by Inbound and Outbound interface???
7.In realtime do we configure ALE systems or Administator will take care of that??
8.How to release an object???
9.What is the flow of a Sales document???
10.What is the flow of Purchase order???
12.What is the flow of Invoice???
13.What are the standard IDOC's used???
14.What do you mean by table control???Where will we use this???
15.What are field symbols??Where will we use these symbols???
Deepti
1. There are other ways of entering data into a DB table. ex. B D C
2. Collect statement collect/adds the records basing on a key field. allows to create summarised data sets.
Append will append/add a record at the end of existing records
8. to release an object - use se10/se9
9. sales doc flow: S. A. - S. O. - Delivery - Billing
12. Delivery - invoice.
15. field symbols are used for dynamic allocation. at runtime u can assign a concrete field to field-symbol.
Kishore
1. you can go to abap editor (se38) and use insert statement for insertion update for update and modify for modifications.
2. collect will not allow duplicate entries, while append can allow duplicates.
3. if any changes are made to objects they are to be transported to different systems i.e, change and transport.
4. in user exits we go by general method for enhancements while BADIs we use objects (oops concepts)
methods for enhancement.
14. table controls are enhanced version for step loops where we can expand rows .main difference between these two
is step loop can be expanded to two lines table controls can`t.
15. field symbols are just like pointers concept which are used in C language. We use them when we want to refer to
the fields considered,it doesnt allocate any memory for it.
Venu Rapolu
1. Ans: Using BDC., LSMW,,ALE., BAPI
2. Ans: Collect: it adds the numeric fields to the existing non numeric key field records., thereby avoiding duplicate
values., and append will simply adds the record
3 . Ans: The CTS contains work bench organizer and transport system :
The workbench organizer is used to record and contol changes to the ABAP/4 development objects;
The transport system is used to move objects from an SAP dev.system to production system
6. Ans: Outbound interface is used to send IDocs to the ALE server.,
Inbound interface is used to Analyse the received Idoc.
7. Ans: We (ABAPers) don't do.
8. Ans: se09 or se10
13. Ans: MATMAS
CREMAS
DEBMAS
GLMAST etc...
14. Ans: to display records in table format., we use in Screens
15. Ans: we assign the field content at run time with ASSIGN stmt.
Satish D
1. goto se16 u can view the table contents
2. collect will collects all the numeric fields of nonnumeric field values
append will append record at the end of table
3. when we are creatiing new task like dev. a new prg.. after completion of dev. that will be trnsported to testing system or production system to do that we are assigning an
transport request from our dev.class(system) by using se09
4. badis are dev. by class and inheritence methods where as user exitsdev by SAP only and empty shells filled wit user logic
5. go to system then status
6. outbound generating an idoc in ale layer with master_idoc_create_messgetype,
inbound is receivng system with idoc_inbound_process, gives an return variable wether it is sucess or not
7. no we have to configur that
8. go to se09 or se01 there write your task no and use release button it will asks whats the other system name
and number enter them and relase by pressing jeep button
9. inquiry
quotation
sales order
shipping
delivery
invoice
return goods
12. after creation of delivry note invoice is prepared
13. master_idoc_distribute will generate standard idoc
Deepti
I am enclosing some of answers which I know.
1. We can use t.Code SE16 to enter values into table only if table maintainence is allowed for that table.
2. Append will add new entries into the table where as collect add into the numeric type fields if other charatcer fields
matches to your selection criteria.
3. CTS used for creation of ABAP development transport requests.The transaction code for this is SE10.
4. UserExits r used for adding additional functionality to the existing SAP standard transactions.Using UserExits we can add additional functionality standard SAP functionality without making any changes to the original code.BADI is a standardized interface for ABAP sources that enables partners and customers to enhance SAP-delivered programs in their namespace.
5 .We can identify User exits by using transactions CMOD and SMOD.
6. After entering transaction code SE10 select the transport request which u want to transport and click on transport icon(Truck symbol) to release it.
10. Purchase Requistion->RFQ->Vendor Evaluation->Purchase Order(ME21).
14. Table control is the only facility provide thru dialog programming when we come acrosse the use of updating standared,deletion,insertion and all database operations.
15. Field symbols r pointers to the existing data types(like 'C') which does not allocate any memory space. These are used faster access of data.
Answers to some ABAP Interview Questions:
Questions which I have faced in an interview:
1) What is runtime analysis? Have you used this?
2) What is meant by performance analysis? Have done anything to improve the performance?
3) How to transfer the objects? Have to transferred any objects?
4) How did you test the developed objects?
5) What is the difference between SAP Memory and ABAP Memory?
6) In order to upload Purchase order details, how you handle multiple values for a single field?
Eg: Item field may contain no. of values for a record
7) What is the procedure you followed to upload the data?
8) How did you handle errors in Call Transaction?
9) Among the Call Transaction and Session Method, which is faster?
10) What are the difference between Interactive and Drill Down Reports?
11) How to pass the variables to forms?
12) How to create a link between modified form and modified print program?
13) What is the table, which contain the details of all the name of the programs and forms?
14) How did you test the form u developed? How did you taken print?
15) What are Standard Texts?
16) What is the difference between Clustered Tables and Pooled Tables?
17) What is pf-status?
18) Among "Move" and "Move Corresponding", which is efficient one?
19) What are the output type and Tcodes?
20) Where we use Chain and Endchain?
21) Do you use select statement in loop endloop, how will be the performance? To improve the performance?
22) In select-options, how to get the default values as current month first date and last date by default?
Eg: 1/12/2004 and 31/12/2004
Go thru these answers:
1) What is runtime analysis? Have you used this?
It's checks program execution time in microseconds. When you go to se30.if you give desired program name in performance file. It will take you to below screen. You can get how much past is your program.
2) What is meant by performance analysis? Have done
3) How to transfer the objects? Have you transferred any objects?
4) How did you test the developed objects?
I was testing a developed object. There are two types of testing
- Negative testing
- Positive testing
In negative testing we will give negative data in input and we check any errors occurs.
In positive testing we will give positive data in input for checking errors.
8) How did you handle errors in Call Transaction?
We can create a internal table like 'bsgmcgcoll'. All the messages will go to internal table. We can get errors in this internal table.
Below messages are go to internal table. when you run the call transaction.
- Message type
- Message id
- Message Number
- Variable1
- Variable2
- Variable3
9) Among the Call Transaction and Session Method, which is faster?
Call transaction is faster then session method. But usually we use session method in real time...because we can transfer large amount of data from internal table to database and if any errors in a session. Process will not complete until session get correct.
10) What are the difference between Interactive and Drill Down Reports?
ABAP/4 provides some interactive events on lists such as AT LINE-SELECTION (double click) or AT USER-COMMAND (pressing a button). You can use these events to move through layers of information about individual items in a list.
Drill down report is nothing but interactive report...drilldown means above paragraph only.
11) How to pass the variables to forms?
12) What is the table, which contain the details of all the name of the programs and forms?
Table contains vertical and horizontal lines. We can store the data in table as blocks. We can scroll depends upon your wish. And these all are stored in database (data dictionary).
Which contain the details of all the name of the programs and forms? (I don't know).
13) How did you test the form u developed? How did you taken print?
14) What are Standard Texts?
16) What is the difference between Clustered Tables and Pooled Tables?
A pooled table is used to combine several logical tables in the ABAP/4 dictionary. Pooled tables are logical tables that must be assigned to a table pool when they are defined.
Cluster table are logical tables that must be assigned to a table cluster when they are defined.
Cluster table can be used to store control data they can also used to store temporary data or text such as documentation.
17) What is pf-status?
Pf status is used in interactive report for enhancing the functionality. If we go to se41, we can get menus, items and different function keys, which we are using for secondary list in interactive report.
18) Among "Move" and "Move Corresponding", which is efficient one?
I guess, 'move corresponding' is very efficient then 'move' statement. Because usually we use this stamtent for internal table fields only...so if we give move corresponding. Those fields only moving to other place (what ever you want).
19) What are the output type and Tcodes?
20) Where we use Chain and End chain?
21) Do you use select statement in loop end loop, how will be the performance? To improve the performance?
22) In select-options, how to get the default values as current month first date and last date by default?
Eg: 1/12/2004 and 31/12/2004
SAP ABAP interview questions
Thanks to the reader who sent in this question set:
1. What is an ABAP data dictionary?- ABAP 4 data dictionary describes the logical structures of the objects used in application development and shows how they are mapped to the underlying relational database in tables/views.
2. What are domains and data element?- Domains:Domain is the central object for describing the technical characteristics of an attribute of an business objects. It describes the value range of the field. Data Element: It is used to describe the semantic definition of the table fields like description the field. Data element describes how a field can be displayed to end-user.
3. What is foreign key relationship?- A relationship which can be defined between tables and must be explicitly defined at field level. Foreign keys are used to ensure the consistency of data. Data entered should be checked against existing data to ensure that there are now contradiction. While defining foreign key relationship cardinality has to be specified. Cardinality mentions how many dependent records or how referenced records are possible.
4. Describe data classes.- Master data: It is the data which is seldomly changed. Transaction data: It is the data which is often changed. Organization data: It is a customizing data which is entered in the system when the system is configured and is then rarely changed. System data:It is the data which R/3 system needs for itself.
5. What are indexes?- Indexes are described as a copy of a database table reduced to specific fields. This data exists in sorted form. This sorting form ease fast access to the field of the tables. In order that other fields are also read, a pointer to the associated record of the actual table are included in the index. Yhe indexes are activated along with the table and are created automatically with it in the database.
6. Difference between transparent tables and pooled tables.- Transparent tables: Transparent tables in the dictionary has a one-to-one relation with the table in database. Its structure corresponds to single database field. Table in the database has the same name as in the dictionary. Transparent table holds application data. Pooled tables. Pooled tables in the dictionary has a many-to-one relation with the table in database. Table in the database has the different name as in the dictionary. Pooled table are stored in table pool at the database level.
7. What is an ABAP/4 Query?- ABAP/4 Query is a powerful tool to generate simple reports without any coding. ABAP/4 Query can generate the following 3 simple reports: Basic List: It is the simple reports. Statistics: Reports with statistical functions like Average, Percentages. Ranked Lists: For analytical reports. - For creating a ABAP/4 Query, programmer has to create user group and a functional group. Functional group can be created using with or without logical database table. Finally, assign user group to functional group. Finally, create a query on the functional group generated.
8. What is BDC programming?- Transferring of large/external/legacy data into SAP system using Batch Input programming. Batch input is a automatic procedure referred to as BDC(Batch Data Communications).The central component of the transfer is a queue file which receives the data vie a batch input programs and groups associated data into sessions.
9. What are the functional modules used in sequence in BDC?- These are the 3 functional modules which are used in a sequence to perform a data transfer successfully using BDC programming: BDC_OPEN_GROUP - Parameters like Name of the client, sessions and user name are specified in this functional modules. BDC_INSERT - It is used to insert the data for one transaction into a session. BDC_CLOSE_GROUP - This is used to close the batch input session.
10. What are internal tables?- Internal tables are a standard data type object which exists only during the runtime of the program. They are used to perform table calculations on subsets of database tables and for re-organising the contents of database tables according to users need.
11. What is ITS? What are the merits of ITS?- ITS is a Internet Transaction Server. ITS forms an interface between HTTP server and R/3 system, which converts screen provided data by the R/3 system into HTML documents and vice-versa. Merits of ITS: A complete web transaction can be developed and tested in R/3 system. All transaction components, including those used by the ITS outside the R/3 system at runtime, can be stored in the R/3 system. The advantage of automatic language processing in the R/3 system can be utilized to language-dependent HTML documents at runtime.
12. What is DynPro?- DynPro is a Dynamic Programming which is a combination of screen and the associated flow logic Screen is also called as DynPro.
13. What are screen painter and menu painter?- Screen painter: Screen painter is a tool to design and maintain screen and its elements. It allows user to create GUI screens for the transactions. Attributes, layout, filed attributes and flow logic are the elements of Screen painter. Menu painter: Menu painter is a tool to design the interface components. Status, menu bars, menu lists, F-key settings, functions and titles are the components of Menu painters. Screen painter and menu painter both are the graphical interface of an ABAP/4 applications.
14. What are the components of SAP scripts?- SAP scripts is a word processing tool of SAP which has the following components: Standard text. It is like a standard normal documents. Layout sets. - Layout set consists of the following components: Windows and pages, Paragraph formats, Character formats. Creating forms in the R/3 system. Every layout set consists of Header, paragraph, and character string. ABAP/4 program.
15. What is ALV programming in ABAP? When is this grid used in ABAP?- ALV is Application List viewer. Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length. In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output. The report output can contain up to 90 columns in the display with the wide array of display options.
16. What are the events in ABAP/4 language?- Initialization, At selection-screen, Start-of-selection, end-of-selection, top-of-page, end-of-page, At line-selection, At user-command, At PF, Get, At New, At LAST, AT END, AT FIRST.
17. What is CTS and what do you know about it?- The Change and Transport System (CTS) is a tool that helps you to organize development projects in the ABAP Workbench and in Customizing, and then transport the changes between the SAP Systems and clients in your system landscape. This documentation provides you with an overview of how to manage changes with the CTS and essential information on setting up your system and client landscape and deciding on a transport strategy. Read and follow this documentation when planning your development project.
18. What are logical databases? What are the advantages/ dis-advantages of logical databases?- To read data from a database tables we use logical database. A logical database provides read-only access to a group of related tables to an ABAP/4 program. Advantages: i)check functions which check that user input is complete, correct,and plausible. ii)Meaningful data selection. iii)central authorization checks for database accesses. iv)good read access performance while retaining the hierarchical data view determined by the application logic. dis advantages: i)If you donot specify a logical database in the program attributes,the GET events never occur. ii)There is no ENDGET command,so the code block associated with an event ends with the next event statement (such as another GET or an END-OF-SELECTION).
19. What is a batch input session?- BATCH INPUT SESSION is an intermediate step between internal table and database table. Data along with the action is stored in session ie data for screen fields, to which screen it is passed, program name behind it, and how next screen is processed.
20. How to upload data using CATT ?- These are the steps to be followed to Upload data through CATT: Creation of the CATT test case & recording the sample data input. Download of the source file template. Modification of the source file. Upload of the data from the source file.
21. What is Smart Forms?- Smart Forms allows you to create forms using a graphical design tool with robust functionality, color, and more. Additionally, all new forms developed at SAP will be created with the new Smart Form solution.
22. How can I make a differentiation between dependent and independent data?- Client dependent or independent transfer requirements include client specific or cross client objects in the change requests. Workbench objects like SAPscripts are client specific, some entries in customizing are client independent. If you display the object list for one change request, and then for each object the object attributes, you will find the flag client specific. If one object in the task list has this flag on, then that transport will be client dependent.
23. What is the difference between macro and subroutine? - Macros can only be used in the program the are defined in and only after the definition are expanded at compilation / generation. Subroutines (FORM) can be called from both the program the are defined in and other programs . A MACRO is more or less an abbreviation for some lines of code that are used more than once or twice. A FORM is a local subroutine (which can be called external). A FUNCTION is (more or less) a subroutine that is called external. Since debugging a MACRO is not really possible, prevent the use of them (Ive never used them, but seen them in action). If the subroutine is used only local (called internal) use a FORM. If the subroutine is called external (used by more than one program) use a FUNCTION.
Please check these links.
http://www.sap-img.com/abap/abap-interview-question.htm
http://www.sap-img.com/abap/answers-to-some-abap-interview-questions.htm
http://sap.ittoolbox.com/documents/document.asp?i=3240
http://www.techinterviews.com/?p=198
Reward points if useful
Regards
Anji

Using Adobe form designer in ABAP Workbench

Hi,
I am trying to do a POC on PDF generations from ABAP workbench( not from Net weaver developer studio) .
Right now when I go into SFP transaction and clcik on layout tab it gives me error saying 'Error occured in communicating with layout editor' . i am thinking this may be because of i dont have Adobe form designer on my machine. Is it needs to be installed on sever or each machine.
Can anyone guide me on how to start.
Regards
MB

The designer is required, but it is included with the SAPGui 640 (if you choose it in the installation). If you are on SP12 or higher you need an update to the designer that doesn't come with the SAPGui (Designer 7.0). You can download this by itself from the Service Marketplace. There is an OSS note with install instructions. You do have to remove any old versions before you install the new one.

Report Generation with Endeca

Hi ,
We are trying to implement the Endeca Logging and Report Generation in our application. I have followed LogServerReportGen.pdf provided by Endeca.
1. We implemented logging API calls in our code.
2. Created a logserver component in Workbench and specified all the neccessary details
3. Created a report generation componentin Workbech
When i am trying to start the Report Generation component its failing, i am not able to figure out what is the problem here.
Aslo do we need to develop and new script and provision it in workbech for Generating report ? How this report generation works.
Can some one list out what i am missing ?
Thanks
DEV

Hi Praving,
I tried to run it from scripts tab in Workbench admin console. It ran fine without any failures
What i am seeing in the view reports tab is empty all 0 values.... but we could see lot of our call recorded in Logserver output files... somewhere the connection between them is missing. I just used the existing logserver and report generation scripts provided OOB from Endeca.
I havenet logged the key SESSION_ID in loggin calls, will it matter, do you see this as the reasong.
The below is the logserver output I could see
H2012_12_17.10_02_27{version=3.5}
L2012_12_17.10_14_10{DIMS=By Fulfilment Type,DVALS=/By Fulfilment Type/Both,ENE_TIME=210,NUMREFINEMENTS=1,NUM_RECORDS=29,PAGE_TIME=0,TYPE=UNKNOWN}
L2012_12_17.10_14_29{DIMS=By Fulfilment Type,DVALS=/By Fulfilment Type/Both,ENE_TIME=260,NUMREFINEMENTS=1,NUM_RECORDS=11,PAGE_TIME=10,SEARCH_KEY=all,SEARCH_MODE=mode+matchany,SEARCH_TERMS=Cakes,TYPE=S}
L2012_12_17.10_14_45{AUTOCORRECT_TO=cakes,DIMS=By Fulfilment Type,DVALS=/By Fulfilment Type/Both,ENE_TIME=100,NUMREFINEMENTS=1,NUM_RECORDS=11,PAGE_TIME=0,SEARCH_KEY=all,SEARCH_MODE=mode+matchany,SEARCH_TERMS=Cakys,TYPE=S}
L2012_12_17.10_15_04{DIMS=By Fulfilment Type,DVALS=/By Fulfilment Type/Both,ENE_TIME=70,NUMREFINEMENTS=1,NUM_RECORDS=4,PAGE_TIME=0,SEARCH_KEY=all,SEARCH_MODE=mode+matchany,SEARCH_TERMS=Wine,TYPE=S}
L2012_12_17.10_15_22{DIMS=Wine%2CBy Fulfilment Type,DVALS=/Wine/Wine%2C/By Fulfilment Type/Both,ENE_TIME=40,NUMREFINEMENTS=2,NUM_RECORDS=4,PAGE_TIME=0,TYPE=SN}
L2012_12_17.10_15_49{DIMS=Wine%2CBy Fulfilment Type,DVALS=/Wine/Red%2C/By Fulfilment Type/Both,ENE_TIME=40,NUMREFINEMENTS=2,NUM_RECORDS=4,PAGE_TIME=0,TYPE=SN}
L2012_12_17.10_16_53{DIMS=Wine%2CBy Fulfilment Type,DVALS=/Wine/Red%2C/By Fulfilment Type/Both,ENE_TIME=130,NUMREFINEMENTS=2,NUM_RECORDS=0,PAGE_TIME=0,TYPE=SN}
L2012_12_17.10_17_06{DIMS=Wine%2CBy Fulfilment Type,DVALS=/Wine/Red%2C/By Fulfilment Type/Both,ENE_TIME=110,NUMREFINEMENTS=2,NUM_RECORDS=0,PAGE_TIME=0,TYPE=SN}
L2012_12_17.10_17_20{DIMS=By Fulfilment Type,DVALS=/By Fulfilment Type/Both,ENE_TIME=80,NUMREFINEMENTS=1,NUM_RECORDS=0,PAGE_TIME=0,SEARCH_KEY=all,SEARCH_MODE=mode+matchany,SEARCH_TERMS=Strawberry,TYPE=S}
L2012_12_17.10_17_31{DIMS=By Fulfilment Type,DVALS=/By Fulfilment Type/Both,ENE_TIME=160,NUMREFINEMENTS=1,NUM_RECORDS=0,PAGE_TIME=0,SEARCH_KEY=all,SEARCH_MODE=mode+matchany,SEARCH_TERMS=Lemon,TYPE=S}
L2012_12_17.10_17_42{DIMS=By Fulfilment Type,DVALS=/By Fulfilment Type/Both,ENE_TIME=81,NUMREFINEMENTS=1,NUM_RECORDS=9,PAGE_TIME=0,SEARCH_KEY=all,SEARCH_MODE=mode+matchany,SEARCH_TERMS=Red,TYPE=S}
L2012_12_17.10_18_00{DIMS=By Fulfilment Type,DVALS=/By Fulfilment Type/Both,ENE_TIME=80,NUMREFINEMENTS=1,NUM_RECORDS=2,PAGE_TIME=0,SEARCH_KEY=all,SEARCH_MODE=mode+matchany,SEARCH_TERMS=Occasion,TYPE=S}
L2012_12_17.10_18_14{DIMS=By Fulfilment Type,DVALS=/By Fulfilment Type/Both,ENE_TIME=110,NUMREFINEMENTS=1,NUM_RECORDS=1,PAGE_TIME=0,SEARCH_KEY=all,SEARCH_MODE=mode+matchany,SEARCH_TERMS=Basket,TYPE=S}
L2012_12_17.10_18_31{DIMS=By Fulfilment Type,DVALS=/By Fulfilment Type/Both,ENE_TIME=140,NUMREFINEMENTS=1,NUM_RECORDS=3,PAGE_TIME=1,SEARCH_KEY=all,SEARCH_MODE=mode+matchany,SEARCH_TERMS=Blooms,TYPE=S}
L2012_12_17.10_19_51{DIMS=By Fulfilment Type,DVALS=/By Fulfilment Type/Both,ENE_TIME=30,NUMREFINEMENTS=1,NUM_RECORDS=3,PAGE_TIME=0,SEARCH_KEY=all,SEARCH_MODE=mode+matchany,SEARCH_TERMS=Blooms,TYPE=S}

LOAD UNIT OF COMPONENT IS VERY LARGE (GENERATION LIMIT)

We are experiencing this meesage when compiling an ABAP WEB DYNPRO Application: "LOAD UNIT OF COMPONENT IS VERY LARGE (GENERATION LIMIT)"
When Checking the Generation Limits In the Context menu, I have determined our size of Generated Load in bytes is to big.
The documentation of recommendations is to restructure the program. I am not clear what this means and how this would reduce the Generation Load in bytes. Any ideas would be appreciated.

> How should we reorganize the application and at the same time ensure smooth and user-friendly handling?
We only want to use one Explorer window.
Using multiple components doesn't mean that the user will notice any difference. Component usages can be embedded within one another. Using the ALV for instance is a perfect example of a component usage.
>- Even the SAP reference application "LORD_MAINTAIN_COMP" (37 views) is way too big, according to the recommendation. Is there a better example from SAP?
I wouldn't consider LORD_MAINTAIN_COMP a reference applicatoin. It was one of the veryfirst WDA's shipped by SAP before we learned some of these lessons ourselves. Have a look at the guidelines for Floorplan Manager if you are on 7.01. The FPM provides a very good (and well used by SAP) framework for building large scale WDA applications.
>- How could a complex transaction be built and at the same time stay in the green limit area (< 500k
As described the usage of multiple components avoids the generation limit and is recommended for large scale applications.
>- What at all is the problem in loading 2 Megabytes of data into memory? Could you please describe the technical background in more detail?
It has nothing to do with 2Mb into memory. It has to do with the generation load size in the VM for the generated class that represents your WDA Component. The ABAP compiler and VM have limits (like all VMs and compilers) on total load size and the maximum size for operations and leaps. Generated code can be extremely verbose. Under normal conditions, these load limits are almost never reached in human created classes.
In 7.02 we backported the 7.20 ABAP complier - which in additon tpbe rewritten to support multipass compelation, also increases some of the load limits. However the general recommandation about componentization still stands. Componentization of you WDA application improves maintainabilityand reusability over time. My personal rule is that if you are getting between 10-12 views in your Component, it is time to think about breaking out into multiple components.
>- Is there a maximum load size, which would lead to an error (reject of generation)?
Yes there is. However the workbench throws warnings well in advance. At some point it won't even let you add more views to a component. However if you continue to add content to the existing views, you can reach a point where generation fails.

Web Service Proxy Generation failed

Hi @all,
i would like to consume a web service with the adaptive webdynpro model, but the proxy generation fails. Attached you will find the log file of the NWDS:
com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Exception on creation of service metadata for WSDL URL 'http://ktkrs3580/Elan2Webservice/elan_service.asmx?WSDL' and service factory configuration '{DynamicProxy.ClassPath=D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.cmi_1.0.0/_cmi_api.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.exception_2.0.0/lib/exception.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/boot.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/iq-lib.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/util.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_lib.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_api.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/tc_sec_wssec_lib.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.runtime_2.0.0/lib/SapDictionaryTypesRuntime.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.services_2.0.0/lib/SapDictionaryTypeServices.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/logging.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/loggingStandard.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/jARM.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.xmltoolkit_2.0.0/lib/sapxmltoolkit.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/activation.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxm-api.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/saaj-api.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxrpc-api.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jnet.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jsse.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/mail.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.webdynpro.model.webservice_2.0.0/lib/_webdynpro_model_webservice.jar;, DynamicProxy.INetProxy.Bypass=, DynamicProxy.INetProxy.Port=8080, DynamicProxy.Javac.path=C:\j2sdk1.4.2_12, DynamicProxy.TempDir=C:\DOKUME1\branch\LOKALE1\Temp\, DynamicProxy.INetProxy.Host=tknproxy}'
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:414)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.readOperationsFromWSDL(WSModelInfo.java:372)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadataInternal(WSModelInfo.java:342)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadata(WSModelInfo.java:306)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadata(WSModelInfo.java:316)
at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.PageRenameWS.loadNameSpacesAndModelClasses(PageRenameWS.java:435)
at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.ModelDialog.nextPressed(ModelDialog.java:105)
at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:316)
at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
at org.eclipse.jface.window.Window.open(Window.java:563)
at com.sap.ide.webdynpro.modeleditor.ModelEditorCallback.createModel(ModelEditorCallback.java:52)
at com.sap.ide.webdynpro.service.modeleditor.ModelService.createModelWithUI(ModelService.java:70)
at com.sap.ide.webdynpro.service.modeleditor.ServiceWithUI.createModel(ServiceWithUI.java:49)
at com.sap.ide.webdynpro.tsmodel.application.provider.ModelNodeProvider.createUniqueName(ModelNodeProvider.java:55)
at com.tssap.selena.impl.model.elements.EntityImpl.createChildEntityUin(EntityImpl.java:936)
at com.tssap.selena.impl.model.elements.EntityImpl.createChildEntity(EntityImpl.java:502)
at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.runInternal(CreationAction.java:76)
at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.access$000(CreationAction.java:24)
at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction$1.run(CreationAction.java:51)
at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.run(CreationAction.java:57)
at com.sap.ide.webdynpro.projectbrowser.actions.PBCreateModelAction.run(PBCreateModelAction.java:95)
at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:224)
at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1407)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model. See nested exception for details.
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:150)
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.<init>(DGenericServiceImpl.java:50)
at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:88)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:412)
... 53 more
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.ProxyGeneratorException: Proxy Generator Error. Proxy generation problem. See nested exception.
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.generateProxy(ProxyGenerator.java:283)
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:147)
... 56 more
Caused by: java.io.IOException: Compilation fails...
C:\Dokumente und Einstellungen\branch\Lokale Einstellungen\Temp\DGenService1207743399620\types\p1\RelationCIShort.java:161: getIdCI() is already defined in types.p1.RelationCIShort
public java.lang.Integer getIdCI() {
^
C:\Dokumente und Einstellungen\branch\Lokale Einstellungen\Temp\DGenService1207743399620\types\p1\RelationCIShort.java:164: hasIdCI() is already defined in types.p1.RelationCIShort
public boolean hasIdCI() {
^
2 errors
THX!
Regards,
Christian

found the fix discussed on this blog... http://kingsfleet.blogspot.com/2008/07/working-round-xsdchoice-binding-issue.html

Generation workbench

Similar Messages

Maybe you are looking for