Generete output using function modules.

Hi,
can any one help me in this...
SELECT SINGLE changenr FROM cdpos INTO iv_changenr WHERE objectclas = 'EINKBELEG' AND
                objectid = wa_ekpo-ebeln AND tabname = 'EKPO' AND tabkey = iv_tabkey AND fname = 'KEY' AND
                chngind = 'I'.
              IF sy-subrc = 0.
                SELECT SINGLE udate FROM cdhdr INTO iv_udate WHERE objectclas = 'EINKBELEG'
                     AND objectid = wa_ekpo-ebeln AND changenr = iv_changenr.
I want togenerete the above code using this FMs....
CHANGEDOCUMENT_READ_HEADERS' ..and...CHANGEDOCUMENT_READ_POSITIONS'.
Help me in this..
Thanks,
PK

Hi,
Refer below sample code.
DATA: LS_CDRED LIKE LINE OF GT_CDRED.
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
EXPORTING
ARCHIVE_HANDLE = 0
DATE_OF_CHANGE = '00000000'
OBJECTCLASS = 'YTEST_TABLE_CNG'
OBJECTID = ' '
TIME_OF_CHANGE = '000000'
USERNAME = SY-UNAME
LOCAL_TIME = ' '
DATE_UNTIL = '99991231'
TIME_UNTIL = '235959'
NOPLUS_ASWILDCARD_INOBJID = ' '
TABLES
I_CDHDR = GT_CDHDR
EXCEPTIONS
NO_POSITION_FOUND = 1
WRONG_ACCESS_TO_ARCHIVE = 2
TIME_ZONE_CONVERSION_ERROR = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE 'No entries found' TYPE 'E'.
ENDIF.
IF NOT GT_CDHDR IS INITIAL.
LOOP AT GT_CDHDR INTO GS_CDHDR.
CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
EXPORTING
CHANGENUMBER = GS_CDHDR-CHANGENR
TABLES
EDITPOS = GT_CDSHW
EDITPOS_WITH_HEADER = GT_CDRED
EXCEPTIONS
NO_POSITION_FOUND = 1
WRONG_ACCESS_TO_ARCHIVE = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE 'No item details found' TYPE 'E'.
ELSE.
LOOP AT GT_CDRED INTO LS_CDRED.
MOVE-CORRESPONDING GS_CDHDR TO GS_OUT.
MOVE-CORRESPONDING LS_CDRED TO GS_OUT.
APPEND GS_OUT TO GT_OUT.
CLEAR: GS_OUT,
LS_CDRED.
ENDLOOP.
CLEAR: GS_CDHDR.
ENDIF.
ENDLOOP.
ENDIF.
Thanks,
Archana

Similar Messages

Printing ALV Report output through Function Modules

Hi All,
I want to print my ALV Grid output through function modules/statement (not through print option in menu).
This is because, i am generating a PDF from spool when user clicks on a button. If any changes happened in the ALV output layout, they will be captured in spool through printing it.
So can you please tell me how to print the ALV Output through FMs or sending the ALV output to spool.
Thanks & Regards,
Senthil.
Edited by: senthil nathan on May 17, 2010 2:49 PM

Hi Dev,
Thanks for the reply.
I want to print the ALV when the user clicks on a button in toolbar. Lets say the user has made some changes to the layout, (E.g hiding a field) and when i print that output it should use the changed layout, If i use the FM suggested by you, i cant acheive this.
If you try to print this manually, the system uses the changed layout and not the original. Thats why i want to know FMs/statement to print.
Regards,
Senthil.

ALV report ON WEB BROWSER USING FUNCTION MODULE

HI EXPERTS,
USING FUNCTION MODULE IN ALV ......HOW CAN WE DISPLAY ALV ON BROWSER(INTERNET).

hi
good
go through these links, you ll find detail idea about displaying a ALV output in a browser.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5dc3e690-0201-0010-1ebf-b85b3bed962d
http://help.sap.com/saphelp_nw04/helpdata/en/3e/f496ef143a11d4b59f006094192fe3/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
thanks
mrutyun^

HOW TO USE FUNCTION MODULE IN ALV

hi guyz
I developed an alv report using join statements .But i got all that fields in a function module. so how can i use function module in alv .
if i got a function module with all the fileds do i need to use select statement.
plz help me.
thanks
sudheer

Hi,
Hope the following helps..
1)
LOOP AT IT_OUTPUT.
Call the function module to get the tracking number and store the output in the
variable V_TRACKINGNO.
IT_OUTPUT-TRACKING_NO = V_TRACKINGNO.
MODIFY IT_OUTPUT TRANSPORTING TRACKING_NO.
ENDLOOP.
2) Date conversion
DATA: V_CHAR(10) VALUE '2006.11.17'.
DATA: V_DATE TYPE SYDATUM.
CONCATENATE V_CHAR(4) V_CHAR5(2) V_CHAR8(2) INTO V_DATE.
WRITE: V_DATE TO V_CHAR MM/DD/YYYY.
WRITE: / 'MM/DD/YYY Format - ', V_CHAR.
Please make sure to reward points for helpful answers..
Thanks,
Naren

ALV Tree using Function Modules

Hi,
I want a simple example of ALV Tree using Function Modules which can display multiple Columns in the Hierarchically arranged fashion along with nodes & icons.
Also should be able to handle the events.
Thanks in Advance..

Hi Ramesh,
Here is a example of alv tree
*& Report BCALV_TREE_DEMO *
report bcalv_tree_demo.
class cl_gui_column_tree definition load.
class cl_gui_cfw definition load.
data tree1 type ref to cl_gui_alv_tree.
data mr_toolbar type ref to cl_gui_toolbar.
include <icon>.
include bcalv_toolbar_event_receiver.
include bcalv_tree_event_receiver.
data: toolbar_event_receiver type ref to lcl_toolbar_event_receiver.
data: gt_sflight type sflight occurs 0, "Output-Table
 gt_fieldcatalog type lvc_t_fcat, "Fieldcatalog
 ok_code like sy-ucomm. "OK-Code
start-of-selection.
end-of-selection.
call screen 100.
*& Module PBO OUTPUT
* process before output
module pbo output.
set pf-status 'MAIN100'.
if tree1 is initial.
 perform init_tree.
endif.
call method cl_gui_cfw=>flush.
endmodule. " PBO OUTPUT
*& Module PAI INPUT
* process after input
module pai input.
case ok_code.
 when 'EXIT' or 'BACK' or 'CANC'.
 perform exit_program.
 when others.
 call method cl_gui_cfw=>dispatch.
endcase.
clear ok_code.
call method cl_gui_cfw=>flush.
endmodule. " PAI INPUT
*& Form build_fieldcatalog
* build fieldcatalog for structure sflight
form build_fieldcatalog.
* get fieldcatalog
call function 'LVC_FIELDCATALOG_MERGE'
 exporting
 i_structure_name = 'SFLIGHT'
 changing
 ct_fieldcat = gt_fieldcatalog.
* change fieldcatalog
data: ls_fieldcatalog type lvc_s_fcat.
loop at gt_fieldcatalog into ls_fieldcatalog.
 case ls_fieldcatalog-fieldname.
 when 'CARRID' or 'CONNID' or 'FLDATE'.
 ls_fieldcatalog-no_out = 'X'.
 ls_fieldcatalog-key = ''.
 when 'PRICE' or 'SEATSOCC' or 'SEATSMAX' or 'PAYMENTSUM'.
 ls_fieldcatalog-do_sum = 'X'.
 endcase.
 modify gt_fieldcatalog from ls_fieldcatalog.
endloop.
endform. " build_fieldcatalog
*& Form build_hierarchy_header
* build hierarchy-header-information
* -->P_L_HIERARCHY_HEADER strucxture for hierarchy-header
form build_hierarchy_header changing
 p_hierarchy_header type treev_hhdr.
p_hierarchy_header-heading = 'Hierarchy Header'. "#EC NOTEXT
p_hierarchy_header-tooltip =
 'This is the Hierarchy Header !'. "#EC NOTEXT
p_hierarchy_header-width = 30.
p_hierarchy_header-width_pix = ''.
endform. " build_hierarchy_header
*& Form exit_program
* free object and leave program
form exit_program.
call method tree1->free.
leave program.
endform. " exit_program
*& Form build_header
* build table for html_header
* --> p1 text
* <-- p2 text
form build_comment using
 pt_list_commentary type slis_t_listheader
 p_logo type sdydo_value.
data: ls_line type slis_listheader.
* LIST HEADING LINE: TYPE H
clear ls_line.
ls_line-typ = 'H'.
* LS_LINE-KEY: NOT USED FOR THIS TYPE
ls_line-info = 'ALV-tree-demo: flight-overview'. "#EC NOTEXT
append ls_line to pt_list_commentary.
* STATUS LINE: TYPE S
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = 'valid until'. "#EC NOTEXT
ls_line-info = 'January 29 1999'. "#EC NOTEXT
append ls_line to pt_list_commentary.
ls_line-key = 'time'.
ls_line-info = '2.00 pm'. "#EC NOTEXT
append ls_line to pt_list_commentary.
* ACTION LINE: TYPE A
clear ls_line.
ls_line-typ = 'A'.
* LS_LINE-KEY: NOT USED FOR THIS TYPE
ls_line-info = 'actual data'. "#EC NOTEXT
append ls_line to pt_list_commentary.
p_logo = 'ENJOYSAP_LOGO'.
endform.
*& Form create_hierarchy
* text
* --> p1 text
* <-- p2 text
form create_hierarchy.
data: ls_sflight type sflight,
 lt_sflight type sflight occurs 0.
* get data
select * from sflight into table lt_sflight
 UP TO 200 ROWS .
sort lt_sflight by carrid connid fldate.
* add data to tree
data: l_carrid_key type lvc_nkey,
 l_connid_key type lvc_nkey,
 l_last_key type lvc_nkey.
loop at lt_sflight into ls_sflight.
 on change of ls_sflight-carrid.
 perform add_carrid_line using ls_sflight
 changing l_carrid_key.
 endon.
 on change of ls_sflight-connid.
 perform add_connid_line using ls_sflight
 l_carrid_key
 changing l_connid_key.
 endon.
 perform add_complete_line using ls_sflight
 l_connid_key
 changing l_last_key.
endloop.
* calculate totals
call method tree1->update_calculations.
* this method must be called to send the data to the frontend
call method tree1->frontend_update.
endform. " create_hierarchy
*& Form add_carrid_line
* add hierarchy-level 1 to tree
* -->P_LS_SFLIGHT sflight
* -->P_RELEATKEY relatkey
* <-->p_node_key new node-key
form add_carrid_line using ps_sflight type sflight
 p_relat_key type lvc_nkey
 changing p_node_key type lvc_nkey.
data: l_node_text type lvc_value,
 ls_sflight type sflight.
* set item-layout
data: lt_item_layout type lvc_t_layi,
 ls_item_layout type lvc_s_layi.
ls_item_layout-t_image = '@3P@'.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
ls_item_layout-style =
 cl_gui_column_tree=>style_intensifd_critical.
append ls_item_layout to lt_item_layout.
* add node
l_node_text = ps_sflight-carrid.
call method tree1->add_node
 exporting
 i_relat_node_key = p_relat_key
 i_relationship = cl_gui_column_tree=>relat_last_child
 i_node_text = l_node_text
 is_outtab_line = ls_sflight
 it_item_layout = lt_item_layout
 importing
 e_new_node_key = p_node_key.
endform. " add_carrid_line
*& Form add_connid_line
* add hierarchy-level 2 to tree
* -->P_LS_SFLIGHT sflight
* -->P_RELEATKEY relatkey
* <-->p_node_key new node-key
form add_connid_line using ps_sflight type sflight
 p_relat_key type lvc_nkey
 changing p_node_key type lvc_nkey.
data: l_node_text type lvc_value,
 ls_sflight type sflight.
* set item-layout
data: lt_item_layout type lvc_t_layi,
 ls_item_layout type lvc_s_layi.
ls_item_layout-t_image = '@3Y@'.
ls_item_layout-style =
 cl_gui_column_tree=>style_intensified.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
append ls_item_layout to lt_item_layout.
* add node
l_node_text = ps_sflight-connid.
call method tree1->add_node
 exporting
 i_relat_node_key = p_relat_key
 i_relationship = cl_gui_column_tree=>relat_last_child
 i_node_text = l_node_text
 is_outtab_line = ls_sflight
 it_item_layout = lt_item_layout
 importing
 e_new_node_key = p_node_key.
endform. " add_connid_line
*& Form add_cmplete_line
* add hierarchy-level 3 to tree
* -->P_LS_SFLIGHT sflight
* -->P_RELEATKEY relatkey
* <-->p_node_key new node-key
form add_complete_line using ps_sflight type sflight
 p_relat_key type lvc_nkey
 changing p_node_key type lvc_nkey.
data: l_node_text type lvc_value.
* set item-layout
data: lt_item_layout type lvc_t_layi,
 ls_item_layout type lvc_s_layi.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
ls_item_layout-class = cl_gui_column_tree=>item_class_checkbox.
ls_item_layout-editable = 'X'.
append ls_item_layout to lt_item_layout.
l_node_text = ps_sflight-fldate.
call method tree1->add_node
 exporting
 i_relat_node_key = p_relat_key
 i_relationship = cl_gui_column_tree=>relat_last_child
 is_outtab_line = ps_sflight
 i_node_text = l_node_text
 it_item_layout = lt_item_layout
 importing
 e_new_node_key = p_node_key.
endform. " add_complete_line
*& Form register_events
* text
* --> p1 text
* <-- p2 text
form register_events.
* define the events which will be passed to the backend
data: lt_events type cntl_simple_events,
 l_event type cntl_simple_event.
* define the events which will be passed to the backend
l_event-eventid = cl_gui_column_tree=>eventid_expand_no_children.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_checkbox_change.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_header_context_men_req.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_node_context_menu_req.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_item_context_menu_req.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_header_click.
append L_EVENT to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_item_keypress.
append L_EVENT to lt_events.
call method tree1->set_registered_events
 exporting
 events = lt_events
 exceptions
 cntl_error = 1
 cntl_system_error = 2
 illegal_event_combination = 3.
if sy-subrc <> 0.
 message x208(00) with 'ERROR'. "#EC NOTEXT
endif.
* set Handler
data: l_event_receiver type ref to lcl_tree_event_receiver.
create object l_event_receiver.
set handler l_event_receiver->handle_node_ctmenu_request
 for tree1.
set handler l_event_receiver->handle_node_ctmenu_selected
 for tree1.
set handler l_event_receiver->handle_item_ctmenu_request
 for tree1.
set handler l_event_receiver->handle_item_ctmenu_selected
 for tree1.
endform. " register_events
*& Form change_toolbar
* text
* --> p1 text
* <-- p2 text
form change_toolbar.
* get toolbar control
call method tree1->get_toolbar_object
 importing
 er_toolbar = mr_toolbar.
check not mr_toolbar is initial.
* add seperator to toolbar
call method mr_toolbar->add_button
 exporting
 fcode = ''
 icon = ''
 butn_type = cntb_btype_sep
 text = ''
 quickinfo = 'This is a Seperator'. "#EC NOTEXT
* add Standard Button to toolbar (for Delete Subtree)
call method mr_toolbar->add_button
 exporting
 fcode = 'DELETE'
 icon = '@18@'
 butn_type = cntb_btype_button
 text = ''
 quickinfo = 'Delete subtree'. "#EC NOTEXT
* add Dropdown Button to toolbar (for Insert Line)
call method mr_toolbar->add_button
 exporting
 fcode = 'INSERT_LC'
 icon = '@17@'
 butn_type = cntb_btype_dropdown
 text = ''
 quickinfo = 'Insert Line'. "#EC NOTEXT
* set event-handler for toolbar-control
create object toolbar_event_receiver.
set handler toolbar_event_receiver->on_function_selected
 for mr_toolbar.
set handler toolbar_event_receiver->on_toolbar_dropdown
 for mr_toolbar.
endform. " change_toolbar
*& Form init_tree
* text
* --> p1 text
* <-- p2 text
FORM init_tree.
* create fieldcatalog for structure sflight
perform build_fieldcatalog.
* create container for alv-tree
data: l_tree_container_name(30) type c,
 l_custom_container type ref to cl_gui_custom_container.
l_tree_container_name = 'TREE1'.
if sy-batch is initial.
 create object l_custom_container
 exporting
 container_name = l_tree_container_name
 exceptions
 cntl_error = 1
 cntl_system_error = 2
 create_error = 3
 lifetime_error = 4
 lifetime_dynpro_dynpro_link = 5.
 if sy-subrc <> 0.
 message x208(00) with 'ERROR'. "#EC NOTEXT
 endif.
endif.
* create tree control
create object tree1
 exporting
 parent = l_custom_container
 node_selection_mode = cl_gui_column_tree=>node_sel_mode_single
 item_selection = 'X'
 no_html_header = ''
 no_toolbar = ''
 exceptions
 cntl_error = 1
 cntl_system_error = 2
 create_error = 3
 lifetime_error = 4
 illegal_node_selection_mode = 5
 failed = 6
 illegal_column_name = 7.
if sy-subrc <> 0.
 message x208(00) with 'ERROR'. "#EC NOTEXT
endif.
* create Hierarchy-header
data l_hierarchy_header type treev_hhdr.
perform build_hierarchy_header changing l_hierarchy_header.
* create info-table for html-header
data: lt_list_commentary type slis_t_listheader,
 l_logo type sdydo_value.
perform build_comment using
 lt_list_commentary
 l_logo.
* repid for saving variants
data: ls_variant type disvariant.
ls_variant-report = sy-repid.
* create emty tree-control
call method tree1->set_table_for_first_display
 exporting
 is_hierarchy_header = l_hierarchy_header
 it_list_commentary = lt_list_commentary
 i_logo = l_logo
 i_background_id = 'ALV_BACKGROUND'
 i_save = 'A'
 is_variant = ls_variant
 changing
 it_outtab = gt_sflight "table must be emty !!
 it_fieldcatalog = gt_fieldcatalog.
* create hierarchy
perform create_hierarchy.
* add own functioncodes to the toolbar
perform change_toolbar.
* register events
perform register_events.
* adjust column_width
call method tree1->COLUMN_OPTIMIZE.
ENDFORM. " init_tree
regards,
venu.

Updating liveCache Data using Function Module or ABAP program.

Is it possible to update APO Live Cache using Function Module or ABAP Program.
Will the aggregation/disaggreagation remain the same if data is modified using Function Module or ABAP Program.
Regards,
Vikas

ello Vikas,
-> Please click at
http://help.sap.com/saphelp_nw04/helpdata/en/f2/0271f49770f0498d32844fc0283645/frameset.htm
& read about 'SAP liveCache'.
As you know objects stored in liveCache in the class containers can be accessed
and manipulated only via LCA routines which are methods of LCA objects.
The registration of the LCA routines is done automatically when
the liveCache is started by the LC10, check the lcinit.log file.
The shared procedures in the LiveCache are written in C++ and shipped
to the customers as binary shared libraries(LCA-Routines) < LCA build >
together with the LiveCache. The original C++ source code of the
libraries is not generally available to the customers.
The LCA routines could be called via "/SAPAPO/OM*" ABAP functions.
-> For SAP liveCache documentation in English:
http://help.sap.com/saphelp_nw04/helpdata/en/f2/0271f49770f0498d32844fc0283645/frameset.htm
< -> Database Administration in CCMS: SAP liveCache -> liveCache Assistant ->
liveCache: Monitoring -> Problem Analysis-> DB Procedures >
In transaction LC10 for the LCA connection choose liveCache:Monitoring
then go to Problem Analysis -> DB Procedures=>
The system displays an overview of all database procedures loaded into
liveCache, their input and output parameters, and other details.
-> Tr. /n/SAPAPO/OM16 ( in further releases /n/sapapo/om19 ) is provided by
SAP to get information about data stored in the LiveCache. If you would
like to get your own views, you should write a special report in ABAP using
"/SAPAPO/OM"-development class functionality.
-> There are standard function modules in ABAP available to extract/change data from/in liveCache.
-> In addition to the given information => find more information at:
SCM 4.0 -> http://help.sap.com/saphelp_scm40/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
SCM 4.1 ->
http://help.sap.com/saphelp_scm41/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
SCM 5.0 ->
http://help.sap.com/saphelp_scm50/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
You can go to the Advanced Planner and Optimizer documentation from the above links < Supply Network Planning Run -> Aggregated Planning -> SNP Disaggregation Or SNP aggregation . >.
If you still have open questions on the posted topic =>
Could you please give more information on your application scenario.
Thank you and best regards, Natalia Khlopina

WebReporting using function module WWW_DISPATCH_REQUEST_ORIG

Dear experts,
we are using WebReporting in the IACs on ITS; to perform WebReporting we are using function module WWW_DISPATCH_REQUEST_ORIG.
Now we changed from the external to the intern ITS (using ICF); also we changed from release 470 to release 701. After release change the WebReporting is no more working properly.
We have the following behavior: after second calling of function module WWW_DISPATCH_REQUEST_ORIG the content of an dedicated report will be outputted for three times.
It seems to be the buffering of WebReporting output.
Does anyone have a similar issue?
Thank you for your feedback.
Best regards,
Kurt.

Hello Oisin,
Thank you for the information!
We have the following current BASIS and Kernel patch versions:
- Kernel-Release: 701
- Compilation: AIX 2 5 00CB5A5B4C00 Jan 23 2011 21:31:51
- Patch-Level: 128
- ABAP-Load: 1565
- CUA-Load: 32
- Mode: opt
- No Unicode-System
- Patch SAP_BASIS, 701, Level 7, SAPKB70107
- Basis Plug-In: PI_BASIS, 701, Level 7, SAPK-70107INPIBASIS
The following URL is called (via ICF):
http://vsfrd40w.gmsap.migros.ch:8800/sap/bc/gui/sap/its/zwrst?sap-client=754&sap-user=WEISKOPFKU&sap-language=DE&~screen_type=&~store_no=4720&~start_flag=X&~theme=90&~calling_service=z_wosm
It is a customer individual ICF-Service; the following parameters are set:
~SOURCES=ZWRST, WOSZ_FIND, WOSZ_WGS
~THEME=90
~TRANSACTION=ZRWRST
Do you have any idea what the issue could be?
Thank you for your support.
Best regards,
Kurt.

How to upload Excel file in BI using function module in abap program

How to upload Excel file in BI using function module in abap program?

Hi Anuj,
To upload the file , you can try a standard program "RSEPSFTP" .
while you execute the program , a selection screen appears in which the inputs should be give as
RFC destination - The target server name
FTP command- PUT
local file - your file name
local directory - path of your local file
remote file - your target file name
remote directory - where it has to be stored
Hope this is useful for you
Thanks & regards
Anju

How to maintain Ztable using function module instead of SM30

Hi Friends,
please tell me , How to maintain Ztable or view using function module instead of SM30.
Thanks,
Veerendra.

Hi,
You can design your report and use Function module VIEW_MAINTENANCE_CALL for that.
You need to use Action type as 'S' for displaying and 'U' for maintaining the table.
Ex:
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
    ACTION                               = 'S'
    VIEW_NAME                            = 'Table Name'
EXCEPTIONS
   CLIENT_REFERENCE                     = 1
   FOREIGN_LOCK                         = 2
   INVALID_ACTION                       = 3
   NO_CLIENTINDEPENDENT_AUTH            = 4
   NO_DATABASE_FUNCTION                 = 5
   NO_EDITOR_FUNCTION                   = 6
   NO_SHOW_AUTH                         = 7
   NO_TVDIR_ENTRY                       = 8
   NO_UPD_AUTH                          = 9
   ONLY_SHOW_ALLOWED                    = 10
   SYSTEM_FAILURE                       = 11
   UNKNOWN_FIELD_IN_DBA_SELLIST         = 12
   VIEW_NOT_FOUND                       = 13
   OTHERS                               = 14.
Hope this helps.
Message was edited by: Imtiaz Ahmed

How to lock transaction using function module or something like that

Hi, all
I'd like to know the way to lock transacitons using function module or something like that.
I know this would be possible if calling transaciton SM01, but I want to know other ways like calling function module (BAPI ) or method.
Thank you for your cooperation In advance.
Regards,
Hideki Kozai

Hi,
       Try the following FM
BRF_NETWORK_GRAPHICS           BRF: Network Graphics for BRF Objects
BRF_INITIALIZE_GRAPHICS_NGR    BRF: Initialize Network Graphics
BRF_NETWORK_GRAPHICS_NGR       BRF: Network Graphics: Start
BUSG                           SAP Business Graphics
GRAPH_2D                       Calling up the 2D business graphics
GRAPH_2D_MENUE                 DO NOT USE (use 'GRAPH_2D' and 'GRAPH_BUSG_MENU_SET')
GRAPH_3D                       Calling up the 3D presentation graphics
GRAPH_BUSG_COLOR_SET           Definition of color pallets for business graphics
GRAPH_BUSG_MENU_SET            Pushbutton menu (tool bar) for all BUSG modules
GRAPH_MATRIX                   Calling up SAP Business Graphics (2D, 3D and 4D)
GRAPH_MATRIX_2D                Calling up the 2D graphics (user-friendly version)
GRAPH_MATRIX_3D                Structure of 3D graphics (user-friendly version)
GRAPH_MATRIX_4D                Calling up a 3D graphic (4th dimension stacked representation)
Regards,

How to Send Internal table to SAP Spool using Function Modules or Methods?

Hi Experts,
How to Send Internal table to SAP Spool using Function Modules or Methods?
Thanks ,
Kiran

This is my code.
I still get the no ABAP list data for the spool, even tho I can see it sp01?
REPORT Z_MAIL_PAYSLIP.
* Declaration Part *
tables: PERNR, PV000, T549Q, V_T514D, HRPY_RGDIR.
infotypes: 0000, 0001, 0105, 0655.
data: begin of ITAB occurs 0,
MTEXT(25) type C,
PERNR like PA0001-PERNR,
ABKRS like PA0001-ABKRS,
ENAME like PA0001-ENAME,
USRID_LONG like PA0105-USRID_LONG,
end of ITAB.
data: W_BEGDA like HRPY_RGDIR-FPBEG,
 W_ENDDA like HRPY_RGDIR-FPEND.
data: RETURN like BAPIRETURN1 occurs 0 with header line.
data: P_INFO like PC407,
 P_FORM like PC408 occurs 0 with header line.
data: P_IDX type I,
 MY_MONTH type T549Q-PABRP,
 STR_MY_MONTH(2) type C,
 MY_YEAR type T549Q-PABRJ,
 STR_MY_YEAR(4) type C,
 CRLF(2) type x value '0D0A'.
data: W_CMONTH(10) type C.
data: TAB_LINES type I,
 ATT_TYPE like SOODK-OBJTP.
data: begin of P_INDEX occurs 0,
 INDEX type I,
end of P_INDEX.
constants: begin of F__LTYPE, "type of line
 CMD like PC408-LTYPE value '/:', "command
 TXT like PC408-LTYPE value 's', "textline
end of F__LTYPE.
constants: begin of F__CMD, "commands
NEWPAGE like PC408-LINDA value '',
end of F__CMD.
data: P_LIST like ABAPLIST occurs 1 with header line.
*data: OBJBIN like SOLISTI1 occurs 10 with header line,
data: OBJBIN like LVC_S_1022 occurs 10 with header line,
 DOCDATA like SODOCCHGI1,
 OBJTXT like SOLISTI1 occurs 10 with header line,
 OBJPACK like SOPCKLSTI1 occurs 1 with header line,
 RECLIST like SOMLRECI1 occurs 1 with header line,
 OBJHEAD like SOLISTI1 occurs 1 with header line,
 it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 gd_buffer type string,
 l_no_of_bytes TYPE i,
 l_pdf_spoolid LIKE tsp01-rqident,
 l_jobname LIKE tbtcjob-jobname.
data: file_length type int4,
 spool_id type rspoid,
 line_cnt type i.
*-------------------------------------------------------------------* * INITIALIZATION *
OBJBIN = ' | '.
append OBJBIN.
OBJPACK-HEAD_START = 1.
data: S_ABKRS like PV000-ABKRS.
data: S_PABRP like T549Q-PABRP.
data: S_PABRJ like T549Q-PABRJ.
* SELECTION SCREEN *
selection-screen begin of block BL1.
parameters: PAY_VAR like BAPI7004-PAYSLIP_VARIANT default 'ESS_PAYSLIPS' obligatory.
selection-screen end of block BL1.
START-OF-SELECTION.
s_ABKRS = PNPXABKR.
S_PABRP = PNPPABRP.
s_pabrj = PNPPABRJ.
w_begda = PN-BEGDA.
w_endda = PN-ENDDA.
get pernr.
* "Check active employees
rp-provide-from-last p0000 space pn-begda pn-endda.
CHECK P0000-STAT2 IN PNPSTAT2.
* "Check Payslip Mail flag
rp-provide-from-last p0655 space pn-begda pn-endda.
CHECK P0655-ESSONLY = 'X'.
rp-provide-from-last p0001 space pn-begda pn-endda.
* "Find email address
RP-PROVIDE-FROM-LAST P0105 '0030' PN-BEGDA PN-ENDDA.
if p0105-usrid_LONG ne ''.
 ITAB-PERNR = P0001-PERNR.
 ITAB-ABKRS = P0001-ABKRS.
 ITAB-ENAME = P0001-ENAME.
 ITAB-USRID_LONG = P0105-USRID_LONG.
 append itab.
 clear itab.
endif.
"SY-UCOMM ='ONLI'
END-OF-SELECTION.
*------------------------------------------------------------------* start-of-selection.
write : / 'Payroll Area : ', S_ABKRS.
write : / 'Payroll Period/Year : ',STR_MY_MONTH,'-',STR_MY_YEAR. write : / 'System Date : ', SY-DATUM.
write : / 'System Time : ', SY-UZEIT.
write : / 'User Name : ', SY-UNAME.
write : / SY-ULINE.
sort ITAB by PERNR.
loop at ITAB.
 clear : P_INFO, P_FORM, P_INDEX, P_LIST, OBJBIN, DOCDATA, OBJTXT, OBJPACK, RECLIST, TAB_LINES.
 refresh : P_FORM, P_INDEX, P_LIST, OBJBIN, OBJTXT, OBJPACK, RECLIST.
* Retrieve Payroll results sequence number for this run
 select single * from HRPY_RGDIR where PERNR eq ITAB-PERNR
 and FPBEG ge W_BEGDA
 and FPEND le W_ENDDA
 and SRTZA eq 'A'.
* Produce payslip for those payroll results
 if SY-SUBRC = 0.
 call function 'GET_PAYSLIP'
 EXPORTING
 EMPLOYEE_NUMBER = ITAB-PERNR
 SEQUENCE_NUMBER = HRPY_RGDIR-SEQNR
 PAYSLIP_VARIANT = PAY_VAR
 IMPORTING
 RETURN = RETURN
 P_INFO = P_INFO
 TABLES
 P_FORM = P_FORM.
 check RETURN is initial.
* remove linetype from generated payslip
 loop at p_form.
 objbin = p_form-linda.
 append objbin.
 line_cnt = line_cnt + 1.
 endloop.
 file_length = line_cnt * 1022.
* create spool file of paylsip
 CALL FUNCTION 'SLVC_TABLE_PS_TO_SPOOL'
 EXPORTING
 i_file_length = file_length
 IMPORTING
 e_spoolid = spool_id
 TABLES
 it_textdata = objbin.
 IF sy-subrc EQ 0.
 WRITE spool_id.
 ENDIF.
 DESCRIBE table objbin.
 DATA PDF LIKE TLINE OCCURS 100 WITH HEADER LINE.
 CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
 EXPORTING
 SRC_SPOOLID = spool_id
 NO_DIALOG = ' '
 DST_DEVICE = 'MAIL'
* PDF_DESTINATION =
* IMPORTING
* PDF_BYTECOUNT = l_no_of_bytes
* PDF_SPOOLID = l_pdf_spoolid
* LIST_PAGECOUNT =
* BTC_JOBNAME =
* BTC_JOBCOUNT =
 TABLES
 PDF = pdf
 EXCEPTIONS
 ERR_NO_ABAP_SPOOLJOB = 1
 ERR_NO_SPOOLJOB = 2
 ERR_NO_PERMISSION = 3
 ERR_CONV_NOT_POSSIBLE = 4
 ERR_BAD_DESTDEVICE = 5
 USER_CANCELLED = 6
 ERR_SPOOLERROR = 7
 ERR_TEMSEERROR = 8
 ERR_BTCJOB_OPEN_FAILED = 9
 ERR_BTCJOB_SUBMIT_FAILED = 10
 ERR_BTCJOB_CLOSE_FAILED = 11
 OTHERS = 12
 IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
*Download PDF file C Drive
CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 filename = 'C:\itab_to_pdf.pdf'
 filetype = 'BIN'
 TABLES
 data_tab = pdf.
* Transfer the 132-long strings to 255-long strings
* LOOP AT pdf.
* TRANSLATE pdf USING ' ~'.
* CONCATENATE gd_buffer pdf INTO gd_buffer.
* ENDLOOP.
* TRANSLATE gd_buffer USING '~ '.
* DO.
* it_mess_att = gd_buffer.
* APPEND it_mess_att.
* SHIFT gd_buffer LEFT BY 255 PLACES.
* IF gd_buffer IS INITIAL.
* EXIT.
* ENDIF.
* ENDDO.
 OBJHEAD = 'Objhead'.
 append OBJHEAD.
* preparing email subject
 concatenate W_ENDDA(6)
 ' Payslip-'
 ITAB-ENAME+0(28)
 ITAB-PERNR+4(4) ')'
 into DOCDATA-OBJ_DESCR.
 DOCDATA-OBJ_NAME = 'Pay Slip'.
 DOCDATA-OBJ_LANGU = SY-LANGU.
 OBJTXT = 'Pay Slip.'.
 append OBJTXT.
*prepare email lines
 OBJTXT = DOCDATA-OBJ_DESCR.
 append OBJTXT.
 OBJTXT = 'Please find enclosed your current payslip.'.
 append OBJTXT.
* Write Attachment(Main)
* 3 has been fixed because OBJTXT has fix three lines
 read table OBJTXT index 3.
* DOCDATA-DOC_SIZE = ( 3 - 1 ) * 255 + strlen( OBJTXT ).
 clear OBJPACK-TRANSF_BIN.
 OBJPACK-HEAD_START = 1.
 OBJPACK-HEAD_NUM = 0.
 OBJPACK-BODY_START = 1.
 OBJPACK-BODY_NUM = 3.
 OBJPACK-DOC_TYPE = 'RAW'.
 append OBJPACK.
* Create Message Attachment
 ATT_TYPE = 'PDF'.
 describe table OBJBIN lines TAB_LINES.
 read table OBJBIN index TAB_LINES.
* OBJPACK-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + strlen( OBJBIN ).
 OBJPACK-TRANSF_BIN = 'X'.
 OBJPACK-HEAD_START = 1.
 OBJPACK-HEAD_NUM = 0.
 OBJPACK-BODY_START = 1.
 OBJPACK-BODY_NUM = TAB_LINES.
 OBJPACK-DOC_TYPE = ATT_TYPE.
 OBJPACK-OBJ_NAME = 'ATTACHMENT'.
 OBJPACK-OBJ_DESCR = 'Payslip'.
 append OBJPACK.
* Create receiver list refresh RECLIST.
 clear RECLIST.
 RECLIST-RECEIVER = itab-USRID_long.
 translate RECLIST-RECEIVER to lower case.
 RECLIST-REC_TYPE = 'U'.
 append RECLIST.
* Send the document
*SO_NEW_DOCUMENT_ATT_SEND_API1
 call function 'SO_DOCUMENT_SEND_API1'
 exporting
 DOCUMENT_DATA = DOCDATA
 PUT_IN_OUTBOX = 'X'
 COMMIT_WORK = 'X'
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
 tables
 PACKING_LIST = OBJPACK
 OBJECT_HEADER = OBJHEAD
 CONTENTS_BIN = pdf
 CONTENTS_TXT = OBJTXT
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
 RECEIVERS = RECLIST
 exceptions
 TOO_MANY_RECEIVERS = 1
 DOCUMENT_NOT_SENT = 2
 DOCUMENT_TYPE_NOT_EXIST = 3
 OPERATION_NO_AUTHORIZATION = 4
 PARAMETER_ERROR = 5
 X_ERROR = 6
 ENQUEUE_ERROR = 7
 others = 8.
 if SY-SUBRC NE 0.
 ITAB-MTEXT = 'Message Not Sent to : '.
 else.
 ITAB-MTEXT = 'Message Sent to : '.
 endif.
* else.
* ITAB-MTEXT = 'Message Not Sent to : '.
* endif.
 else.
 "SY-SUBRC Not = 0
 ITAB-MTEXT = 'Payroll data not found : '.
 endif.
 "end of SY-SUBRC = 0.
 modify ITAB.
endloop. "end loop at ITAB
sort ITAB by MTEXT PERNR.
loop at ITAB.
 at new MTEXT.
 uline.
 write : / ITAB-MTEXT color 4 intensified on.
 write : / 'Emp. Code' color 2 intensified on,
 12 'Emp. Name' color 2 intensified on,
 54 'Email ID' color 2 intensified on.
 endat.
 write : / ITAB-PERNR, 12 ITAB-ENAME, 54 ITAB-USRID_LONG.
endloop.

Custom extractors using function modules

Hey all
Does anyone has a document regarding how to Develop Custom extractors using function modules?Step by step method would be great
Also document regarding CTS in BW?
Appreciate it
Thanks

Hi,
See here:
Generic Extractors
Generic data sources
Generic DS
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Best regards,
Eugene

Hi. i used Function module to change Characteristic values of a sales order

hi. i used Function module to change Characteristic values of a sales order..
but sales order's Characteristic values didn't change.
And the Function module doesn't occur any log message.
please tell me wrong code, and how to solve this problem.
if i have wrong method, what data can i pass to change the characteristic values
DATA: LT_E1CUVAL TYPE TABLE OF E1CUVAL.
DATA: WA_E1CUVAL TYPE E1CUVAL.
DATA: LS_CFG_HEAD LIKE CUXT_CUCFG_S,
 LS_INSTANCES LIKE CUXT_CUINS_S,
 LS_VALUES LIKE CUXT_CUVAL_S,
 LS_E1CUCFG LIKE E1CUCFG,
 LS_E1CUINS LIKE E1CUINS,
 LS_E1CUVAL LIKE E1CUVAL,
 LS_PROFILE LIKE E1CUCOM,
 LS_VBAP LIKE VBAP,
 L_CUOBJ LIKE INOB-CUOBJ,
 L_ATINN LIKE CABN-ATINN.
DATA: LT_INSTANCES LIKE CUXT_CUINS_S OCCURS 0,
 LT_PART_OF LIKE CUXT_CUPRT_S OCCURS 0,
 LT_VALUES LIKE CUXT_CUVAL_S OCCURS 0,
 LT_VAR_KEYS LIKE CUXT_CUVK_S OCCURS 0,
 LT_KSML LIKE KSML OCCURS 0 WITH HEADER LINE,
 BEGIN OF LT_CLINT OCCURS 0,
 CLINT LIKE KSSK-CLINT,
 END OF LT_CLINT.
DATA: LT_CUIB LIKE CUIB_CUOBJ_S OCCURS 0 WITH HEADER LINE.
DATA: E_ROOT_INSTANCE TYPE CUXT_INSTANCE_NO.
DATA: EV_ROOT_PERSIST_ID TYPE IBEXTINST_DATA-EXT_INST_ID.
DATA: EV_CFG_HAS_CHANGED TYPE XFELD.
DATA: EV_HANDLE_APPL_LOG TYPE BALLOGHNDL.
DATA: L_CUOBJ_NEW TYPE CUOBJ.
DATA: L_OWNER TYPE IBXX_BUSINESS_OBJECT.
REFRESH LT_E1CUVAL.
CLEAR LS_VBAP.
SELECT SINGLE CUOBJ INTO CORRESPONDING FIELDS OF LS_VBAP
 FROM VBAP WHERE VBELN = I_VBELN
 AND POSNR = I_POSNR.
IF SY-SUBRC <> 0.
 RAISE INSTANCE_NOT_FOUND.
ENDIF.
REFRESH LT_CUIB. CLEAR LT_CUIB.
LT_CUIB-INSTANCE = LS_VBAP-CUOBJ.
APPEND LT_CUIB.
CALL FUNCTION 'CUCB_INITIALIZER'
 EXPORTING
 IT_INSTANCES = LT_CUIB[].
CALL FUNCTION 'CUXI_GET_SINGLE_CONFIGURATION'
 EXPORTING
 I_ROOT_INSTANCE = LS_VBAP-CUOBJ
 IMPORTING
 E_CFG_HEAD = LS_CFG_HEAD
 ES_PROFILE = LS_PROFILE
 ET_RETURN = ET_RETURN
 TABLES
 E_TAB_INSTANCES = LT_INSTANCES
 E_TAB_PART_OF = LT_PART_OF
 E_TAB_VALUES = LT_VALUES
 E_TAB_VAR_KEYS = LT_VAR_KEYS
 EXCEPTIONS
 INVALID_INSTANCE = 1
 NO_ROOT_INSTANCE = 2
 INSTANCE_IS_A_CLASSIFICATION = 3
 INTERNAL_ERROR = 4
 NO_PROFILE_FOUND = 5
 INVALID_DATA = 6
 OTHERS = 7.
IF SY-SUBRC <> 0.
 CASE SY-SUBRC.
 WHEN 1.
 RAISE INSTANCE_NOT_FOUND.
 WHEN 3.
 RAISE INSTANCE_IS_A_CLASSIFICATION.
 WHEN OTHERS.
 RAISE INVALID_DATA.
 ENDCASE.
ELSE.
 LOOP AT LT_VALUES INTO LS_VALUES.
 IF LS_VALUES-CHARC = 'SAP_MILLCA_PACKAGING'
 OR LS_VALUES-CHARC = 'PD_CA_PACKING_DM'.
 LS_VALUES-VALUE = '7100010'. "This is test data
 MODIFY LT_VALUES FROM LS_VALUES.
 ELSE.
 DELETE LT_VALUES WHERE CHARC = LS_VALUES-CHARC.
 ENDIF.
 CLEAR LS_VALUES.
 ENDLOOP.
ENDIF.
영업정보 특성 변경
CALL FUNCTION 'CUXI_SET_SINGLE_CONFIGURATION'
 EXPORTING
 I_CFG_HEADER = LS_CFG_HEAD
 I_ROOT_INSTANCE = LS_VBAP-CUOBJ
 I_PLANT =
 I_STRUCTURE_EXPLOSION_DATE =
 I_STRUCTURE_EXPLOSION_APPL_ID =
 I_LOGSYS =
 IS_PROFILE = LS_PROFILE
 IV_ONLY_SINGLE_LEVEL =
 IV_HANDLE_APPL_LOG =
 IV_OBJECT_APPL_LOG = 'CIF'
 IV_SUBOBJECT_APPL_LOG = 'T_CNFG'
 IMPORTING
 E_ROOT_INSTANCE = E_ROOT_INSTANCE
 EV_ROOT_PERSIST_ID = EV_ROOT_PERSIST_ID
 EV_CFG_HAS_CHANGED = EV_CFG_HAS_CHANGED
 EV_HANDLE_APPL_LOG = EV_HANDLE_APPL_LOG
 ET_RETURN = ET_RETURN
 TABLES
 I_TAB_INSTANCES = LT_INSTANCES
 I_TAB_PART_OF = LT_PART_OF
 I_TAB_VALUES = LT_VALUES
 I_TAB_VAR_KEYS = LT_VAR_KEYS
 I_TAB_BLOB =
 EXCEPTIONS
 NO_CONFIGURATION_DATA = 1
 NO_ROOT_INSTANCE = 2
 INVALID_INSTANCE = 3
 INSTANCE_IS_A_CLASSIFICATION = 4
 INTERNAL_ERROR = 5
 NO_PROFILE_FOUND = 6
 INVALID_DATA = 7
 OTHERS = 8
IF SY-SUBRC <> 0.
 CASE SY-SUBRC.
 WHEN 1.
 RAISE NO_CONFIGURATION_DATA.
 WHEN 3.
 RAISE NO_ROOT_INSTANCE.
 WHEN 3.
 RAISE INVALID_INSTANCE .
 WHEN 3.
 RAISE INSTANCE_IS_A_CLASSIFICATION.
 WHEN 3.
 RAISE INTERNAL_ERROR.
 WHEN OTHERS.
 RAISE INVALID_DATA.
 ENDCASE.
ENDIF.
COMMIT WORK.
save configuration with next commit
CLEAR: LS_INSTANCES.
READ TABLE LT_INSTANCES INTO LS_INSTANCES INDEX 1.
L_OWNER-OBJECT_TYPE = LS_INSTANCES-OBJ_TYPE.
L_OWNER-OBJECT_TYPE = 'PVS_POSVAR'.
L_OWNER-OBJECT_KEY = LS_INSTANCES-OBJ_KEY.
CALL FUNCTION 'CUCB_CONFIGURATION_TO_DB'
 EXPORTING
 ROOT_INSTANCE = LS_VBAP-CUOBJ
 ROOT_OBJECT = L_OWNER
 IMPORTING
 NEW_INSTANCE = L_CUOBJ_NEW
 EXCEPTIONS
 INVALID_INSTANCE = 1
 INVALID_ROOT_INSTANCE = 2
 NO_CHANGES = 3
 OTHERS = 4.
IF SY-SUBRC > 1 AND SY-SUBRC <> 3.
 CLEAR LS_VBAP-CUOBJ.
 RAISE INTERNAL_ERROR.
ELSEIF SY-SUBRC = 1.
 LS_VBAP-CUOBJ = L_CUOBJ_NEW.
ENDIF.
What's wrong?
help me to solve this problem.
Thanks a lot.

SD_SALES_DOCUMENT_READ Reads sales document header and business data: tables VBAK, VBKD and VBPA (Sold-to (AG), Payer (RG) and Ship-to (WE) parties)
SD_SALES_DOCUMENT_READ_POS Reads sales document header and item material: tables VBAK, VBAP-MATNR
SD_DOCUMENT_PARTNER_READ partner information including address. Calls SD_PARTNER_READ
SD_PARTNER_READ all the partners information and addresses
SD_DETERMINE_CONTRACT_TYPE
In: at least VBAK-VBELN
Exceptions: NO CONTRACT | SERVICE_CONTRACT | QUANTITY_CONTRACT
SD_SALES_DOCUMENT_COPY
RV_ORDER_FLOW_INFORMATION Reads sales document flow of sales document after delivery and billing
SD_SALES_DOCUMENT_SAVE create Sales Doc from the copied document
SD_SALES_DOCUMENT_ENQUEUE to dequeue use DEQUEUE_EVVBAKE
RV_DELIVERY_PRINT_VIEW Data provision for delivery note printing
SD_PACKING_PRINT_VIEW
SD_DELIVERY_VIEW Data collection for printing
called from RV_DELIVERY_PRINT_VIEW, SD_PACKING_PRINT_VIEW
RV_BILLING_PRINT_VIEW Data Provision for Billing Document Print
regards
vinod

Error occurred while loading Generic extraction using Function module

Hi all
I'm trying to do INIT for Generic Extractor using Function module, but i'm getting error as "Error occurred in the source system"
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Job terminated in source system --> Request set to red
Message no. RSM078
Can u help plz....

Hi Vishnu
This are the Job log details i found in source system...Can u tell what whould be the problem?
Message
Job started
Step 001 started (program SBIE0001, variant &0000000002861, user ID
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = ZYFI102
RLOGSYS    =
REQUNR     = REQU_D9Y4CZDQULRIHRRVU33KOLQZO
UPDMODE    = D
LANGUAGES = *
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 0                                       *
abap/heap_area_total.......... 10737418240                             *
abap/heaplimit................ 40000000                                *
zcsa/installed_languages...... DE                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 3000000                                 *
ztta/roll_extension........... 2000000000                              *
No authorization for Acct type D
Job cancelled after system exception ERROR_MESSAGE
Thanks in advance
Edited by: MohanDP on Feb 25, 2011 11:58 AM
Edited by: MohanDP on Feb 25, 2011 12:01 PM

Error in Data selection in R/3 Generic Extraction Using function Modules

Hi Friends,
I have created a a generic data source using function module to load data from PA0000 and PA0001 Tables ,Function module is working fine when i execute it indipendently and the data source is also working fine when i extract data using RSA3. it is showing correct no of records 157.
When loading data into DSO from BW (using 3.x/7.0 flows) data is comming to PSA all 157 records but in the RSMO the load status is showing yellow when i look into the step by step analysis it is
data selection successfully started
Data selection successfully ended
All Data packets completed.
are showing in red.
after and hour time load getting failed and in the error message it is showing " job terminated in source system---> Request set to red"
it is giving this message wir no RSM 78.
Please let me know it

Hi Jerry,
Thanks for the immediate replay
But here in my source system job is getting terminated.
this is the status of job in Job logs.
the job is running till this step not going ahead.
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 157 records
Result of customer enhancement: 157 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 301 records
Result of customer enhancement: 157 records
Asynchronous send of data package 000001 in task 0002 (1 parallel tasks)
pl. update me if any idea.

Generete output using function modules.

Similar Messages

Maybe you are looking for