Generic data source issue very urjent

HI All,
this is regarding Generic datasource in Quality system . I have to change selection and Hide options i mean i have make check for generic data source. can you please let me know if anybody knows how to change.
i tried to change it's showing dissable only, is there any other process
regards
kk

Hi Friend,
You are not supposed to do any changes in the quality system.Even system doesnt allow you to do the respective changes.The screen appears u like disable mode.
Go to Development system and do the respective changes in the datasource.
Selct the required datasource and choose edit mode option . Then select the required fileds.*After that save the datasource and succesfullu doing changes in the datasource move the respective datasource into qualitysystem.
Hope it will helpful for you.
Cheers,
Chandu.
Edited by: chandu guduru on Aug 28, 2008 1:53 PM
Edited by: chandu guduru on Aug 28, 2008 2:02 PM

Similar Messages

Generic Data Source issue in CRM.

Hi Guru's,
Generic Data Source with Table gave an issue "invalid Extracture structure template XXXXX of Data source XXXXX"
Generic Data source with Function Module gave an issue "Units field VOLUM_U for field VOLUME of DataSource ZTEST_XYZ is hidden"
Generic Data Source with View configured successfully but the data is not coming in Extractor Checker.
Three tables has taken in to consideration. I think there might be some issue with Join condition.
Can any one through light on this incident. Your help will be appreciated.
Thanks in Advance.
Venkat.

Hi Praveen,
yes you are right. I took reference field as VOLUM_U.
I have created Generic Table. Do you need me to take same table in the reference Table.
Thanks
Venkat.

Generic Data Source Creation (Very Urgent)

Hi Friends,
I am getting errors while i am creating Generic Data source using Table "ECMCT" .This table contains all fields which is required for my Data Source.
---> I gave <b>ECMCT</b> table in "Extraction from DB view " but when i click save its showing error message "INVALID EXTRACT STRUCTURE TEMPLATE ECMCT OF DATASOURCE ZFI_ECMCT(is name of my data source)".
> I created Function Module using this Table.
In Function Module "Tables tab"
i gave "ITAB LIKE ECMCT".
In "Source Code tab"
i gave "SELECT * FROM ECMCT INTO TABLE ITAB".
In RSO2 "Extraction Using Function Module"
i gave FM name and Extract Structure name as ECMCT. After clicking save its showing ERRORS:
1) ZFI_ECMCT(is my data source name) : Tables parameter E_T_DATA for Extractor ZFI_CONSOLIDATION(is my Function module)
2) Units field CURR1 for feild HSLVT of datasource ZFI_ECMCT is hidden.
3) ......................................HSL01.....................................................
4)........................................HSL02...................................................
;etc.
Could u anybody suggest me where i am doing wrong. This is very very urgent for me.
Thanks,
Mani.

Hi,
For " Extraction Using Table" the system does not create an extract structure automatically if the Amount field (type CURR) and currency key field (type CUKY ) are in different tables . Hence u create a View of the data table and the reference table (Say PA0002 and T001) wherein, include all the fields from PA0002 and just the referenced fields from T001 so that all the fields come under the view.
But if the above solution is not possible say for ex. if the key fields don't match , then u should go for function modules.
Regards

Generic Data source Issue with Infoset

Hi Experts,
I have created generic data source with Infoset.As per customer requirement, I have to modify join condition between tables from equal to left outer join in infoset.I have tested scenario successfully using infoset query. I have done below steps in generic data source to check the same result.
1.Modified Join condition in infoset and generated the infoset again.
2. Generated generic datasource in RSO2.
When I check same scenario in RSA3, I am getting 0 records.Please help me out.
Thanks in Advance.
Regards,
Raju

Thanks Sriram for your reply.
I am using same user id for both SQ02 and RSA3.
I have Two infosets with same join conditions.I have created SQVI report with First infoset and Generic data source with second infoset.
I have changed join condition second infoset which is used for generic data source.I am still getting same number of records in both SQVI report and in RSA3.I have validated records by considering few records to cross check again.
The change in join condition doesnt show any impact in changing the number of recrods.
I have activated extraction structure in RSA6 but still getting same records.
Thanks,
Raju

Generic Data Source issue

Hi Friends,
We have Generic Data Source (Delta Capable) which is based on Function Module.
For this Data source I am looking for
1) Relevent Outbound Queue Name in SMQ1
2) Relevent R3 Back ground Job which is responsible for data load from Out Bound Queue To Delta Queue
3) Relevent Setup Table in R3 system
4) Is procedure for filling setup table for this generic data source is same as 2LIS Application Specific Data sources?
Thank you.
Tony

1) Relevent Outbound Queue Name in SMQ1
Generic datasources dont have outbound queue.
2) Relevent R3 Back ground Job which is responsible for data load from Out Bound Queue To Delta Queue
No outbound queue hence no job.
3) Relevent Setup Table in R3 system
No Setup table for generic datasource.They fetch directly from R3 tables either directly or via function module.
4) Is procedure for filling setup table for this generic data source is same as 2LIS Application Specific Data sources?
No set up tables for generic datasources.
Generic data sources with delta have delta queue only.
Hope this helps.

Delta Issue in Generic data source

HI all ,
    I have a HR generic data source .which extracts only two records ffrom the source for so many days during delta.
   I checked in RSA3 .It shows 16000 records nearly. I did init without data transfer and then delta,still it picks onlys same 2 records .
   Delta setting in RSO2 is Numeric pointer with new status for changed records with field name as"cheque number"
   In BWdatasourceExtraction tab--Deltaprocess is AIE After Image by extractor.Iam not able to choose any other delta process type as it is built from R/3 .I think because of this process type.
anybody faced the same problem .. I tried many ways.. please guide me how to solve. this issue.

HI Prashanth,
                    I checked RSA7 now and I found the problem .In RSA7 the pointer for cheque number is 991749. The delta record created has cheque number 005409 which is lesser than the pointer ,thats why the record is not picking i guess.
       now ,If this is the case ,How can I give delta field.The generic datasource is built on only one table PAYR ,and having cheque number and other fields as keys in the table PAYR.Date is not a key in the table. Please help how to proceed
Thanks
Rgds
Pradeep

Issue with Safety Upper limit for CALDAY Field for Generic Data Source

Hi,
I have given Upper limit as 1 for Calday field of one of the Generic Data Sources.
I have got a doubt here.If today's load got failed and I will rerun the load next day.So Will that new run captures all 2 days records.
Can any one advise me on this.
Regards,
K.Krishna.

Hi,
A one-day upper safety interval determines that an extraction run today, only fetches records up to yesterday (if the pointer has the day before yesterday date, the extraction comprises from the day before yesterday to yesterday). This is meant to avoid missing records that were about to be persisted in the database when the delta extraction is running but whose date was determined in memory before the delta started.
If pointer has today date value and you want to load data from today and yesterday, you should use a lower safety interval. Take into account that this could reload data previously extracted. Therefore, only InfoProviders with overwritting features (DataStores or InfoObject master data) should be used as targets of this extractions.
You can find further details at:
http://help.sap.com/saphelp_nw04/helpdata/en/37/4f3ca8b672a34082ab3085d3c22145/content.htm
I hope this helps you.
Regards,
Maximiliano

Generic Data Source - Delta Issue

HI,
I have created a generic delta source (transactions) with the following options: -
- using the extract structure
- enabled the generic delta with billing creation date as delta specific field
- calendar day selected
- safety interval upper limit = 1 calendar days
- additive delta
carried out the folling steps in BW
- Full update from above generic data source (all records)
- Init upload without data transfers (1 record)
- Delta enabled
Now, even though i am editing / modifying any record on my own extract strucutres record on R/3 side, it is not getting reflected in RSA7 (delta queue).
P.S:- I have modified one of the record from full update.
Ideally the modified record should be shown in RSA7, but i am not getting the same.
can you please help me
Thanks
Raj

yes,
I also thought the same point. But the records modified / edited yesterday are not appearing in today's delta. I am wondering why.
Is it anything to deal with FULL / INIT without deta transfer / DELTA procedure..
Regards
Rajiv

Duplicate records in generic data source

Hello,
We have created a generic data source using a database view joing two tables MARA and MBEW.
When we run the view in our DEV server, we get perfectly fine data. Now when run the same view in QA, we get duplicate records.
Is it any thing to do with the CLIENT as in QA, we have 2 clients with same data.
MARA MANDT = MBEW MANDT
MARA MATNR = MBEW MATNR
This is what I mention in JOIN Conditions.
Hope I could explain my issue properly. Please HELP !
Abhishek

Please check the possibility of Multiple records for a given material in MBEW,as same material can be in multiple valuation areas
More over you will be executing extraction in one client so it is very unlikely that you see data of the other client
In dev normally we do not have good data to test so it seems like design is correct in dev

Regarding: Loading data from R/3 To BI for a Generic Data source

Hi Every,
Need Help Urgent
I had created a Generic data source with function Module as the data source, in Rsa3 it is working fine.
1-> I had replicated the data source to Bi then i had created a info package and then I executed the same. when it is getting the data and it is show in the request monitor (Number of records ) but the status is not changing from Yellow to Green.
Status in Step by step analysis is every step is green Except "Data selection successfully finished ?" (RED)
2-> Then I had seen the Back ground job in Source system which is executing still. I waited for it for a long time but nearly 30 min.
(I had done Steps one and 2 number of time by activating replicating the data source and so on, but still their is no change in it)
3-> Then I had canceled that back ground job with the help of BASIS (as i feel that it is something going wrong).
4-> I feel that their is some thing wrong in the Code of Extractor.
Please Help...............
""Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE ZBI_MATGRIR OPTIONAL
*Need to get the data only for two Gl account which are fro material purchase while MIGO
*G/L Account Numbers: 0010502001 0010502002
data: E_T_DATA1 type table of ZBI_MATGRIR.
RANGES: R_BUKRS FOR BSIS-BUKRS,
          R_BUDAT FOR BSIS-BUDAT,
          R_GJAHR FOR BSIS-GJAHR,
          R_HKONT FOR BSIS-HKONT.
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
           S_COUNTER_DATAPAKID LIKE SY-TABIX,
           S_CURSOR TYPE CURSOR.
*Declare
TYPES: BEGIN OF TY_FAGL,
    RBURS TYPE FAGLFLEXA-RBUKRS,
    RYEAR TYPE FAGLFLEXA-RYEAR,
    DOCNR TYPE FAGLFLEXA-DOCNR,
    BUZEI TYPE FAGLFLEXA-BUZEI,
    DOCLN TYPE FAGLFLEXA-DOCLN,
    PRCTR TYPE FAGLFLEXA-PRCTR,
    SEGMENT TYPE FAGLFLEXA-SEGMENT,
END OF TY_FAGL.
DATA: GT_FAGL TYPE TABLE OF TY_FAGL,
        GS_FAGL TYPE TY_FAGL.
IF I_INITFLAG = SBIWA_C_FLAG_ON.
    CASE I_DSOURCE.
      WHEN 'ZFI_GL_M4'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE E009(R3). ENDIF.
     this is a typical log call. Please write every error message like this
        LOG_WRITE 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  I_DSOURCE   "message variable 1
                  ' '.                 "message variable 2
        RAISE ERROR_PASSED_TO_MESS_HANDLER.
    ENDCASE.
    APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
    S_S_IF-REQUNR    = I_REQUNR.
    S_S_IF-DSOURCE = I_DSOURCE.
    S_S_IF-MAXSIZE   = I_MAXSIZE.
    APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
    IF S_COUNTER_DATAPAKID = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUKRS'.
        MOVE-CORRESPONDING L_S_SELECT TO R_BUKRS.
        APPEND R_BUKRS.
      ENDLOOP.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GJAHR'.
        MOVE-CORRESPONDING L_S_SELECT TO R_GJAHR.
        APPEND R_GJAHR.
      ENDLOOP.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUDAT'.
        MOVE-CORRESPONDING L_S_SELECT TO R_BUDAT.
        APPEND R_BUDAT.
      ENDLOOP.
*GRIR Inventory (RM/Stores/Spares/FG)   10502001
*GRIR Services & Others Payable   10502002
      R_HKONT-SIGN = 'I'. "i_t_select-sign.
      R_HKONT-OPTION = 'BT'." i_t_select-option.
      R_HKONT-LOW = '0010502001'.
      R_HKONT-HIGH = '0010502002'. "i_t_select-high.
      APPEND R_HKONT.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
      OPEN CURSOR WITH HOLD S_CURSOR FOR
       SELECT BUKRS
              AUGBL
              ZUONR
              BELNR
              GJAHR
              BUZEI
              BUDAT
              HKONT
              BLART
              MONAT
              BSCHL
              SHKZG
              DMBTR
              WAERS
              FROM BSIS
             INTO TABLE E_T_DATA
              WHERE BUKRS IN R_BUKRS
                AND GJAHR IN R_GJAHR
                AND BUDAT IN R_BUDAT
                AND HKONT IN R_HKONT.
Fetch records into interface table.
named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA1
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
DELETE E_T_DATA WHERE BLART NE 'WE'.
      SELECT BUKRS
             AUGBL
             ZUONR
             BELNR
             GJAHR
             BUZEI
             BUDAT
             HKONT
             BLART
             MONAT
             BSCHL
             SHKZG
             DMBTR
             WAERS
             FROM BSAS
             into table   E_T_DATA
             WHERE BUKRS IN R_BUKRS
               AND GJAHR IN R_GJAHR
               AND BUDAT IN R_BUDAT
               AND HKONT IN R_HKONT.
           FETCH NEXT CURSOR S_CURSOR
              APPENDING CORRESPONDING FIELDS
              OF TABLE E_T_DATA
              PACKAGE SIZE S_S_IF-MAXSIZE.
append LINES OF e_t_data1 TO E_T_DATA.
DELETE E_T_DATA WHERE BLART NE 'WE'.
ENDIF.                             "First data package ?
    DATA: F_YEAR TYPE BKPF-GJAHR.
    DATA: F_PERI TYPE BAPI0002_4-FISCAL_PERIOD.
IF E_T_DATA[] IS NOT INITIAL.
   SELECT RBUKRS
          RYEAR
          DOCNR
          BUZEI
          DOCLN
          PRCTR
          SEGMENT
          FROM FAGLFLEXA
          INTO TABLE GT_FAGL
          FOR ALL ENTRIES IN E_T_DATA
       WHERE RYEAR = E_T_DATA-GJAHR
           AND DOCNR = E_T_DATA-BELNR
           AND RLDNR = '0L'
           AND RBUKRS = E_T_DATA-BUKRS
           AND BUZEI = E_T_DATA-BUZEI.
         WHERE RYEAR = E_T_DATA-GJAHR
           AND DOCNR = E_T_DATA-BELNR
           AND RBUKRS = E_T_DATA-BUKRS.
     AND DOCLN = E_T_DATA-BUZEI.
ENDIF.
LOOP AT E_T_DATA.
      IF E_T_DATA-SHKZG = 'H'.
        E_T_DATA-DMBTR = E_T_DATA-DMBTR * -1.
      ENDIF.
      CLEAR: F_YEAR.
      CALL FUNCTION 'BAPI_COMPANYCODE_GET_PERIOD'
        EXPORTING
          COMPANYCODEID       = E_T_DATA-BUKRS
          POSTING_DATE        = E_T_DATA-BUDAT
       IMPORTING
         FISCAL_YEAR         = F_YEAR
         FISCAL_PERIOD       = F_PERI.
      DATA: V_DOC(6) TYPE C .
      CLEAR: V_DOC.
      V_DOC = E_T_DATA-BUZEI.
      IF V_DOC IS NOT INITIAL.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            INPUT = V_DOC
          IMPORTING
            OUTPUT = V_DOC.
      ENDIF.
     aS PROFIT center is not updated in all the lines in Bsis
      READ TABLE GT_FAGL INTO GS_FAGL WITH KEY RYEAR = E_T_DATA-GJAHR
                                                DOCNR = E_T_DATA-BELNR
                                                RBURS = E_T_DATA-BUKRS
                                                BUZEI = E_T_DATA-BUZEI.
      IF SY-SUBRC = 0.
        E_T_DATA-PRCTR = GS_FAGL-PRCTR.
        E_T_DATA-SEGMENT = GS_FAGL-SEGMENT.
      ENDIF.
*As we are using the amount DMBTR in which the amount
*will be in company code currency that is Local currency
*group currency always in the main company code currency.
      CONCATENATE   F_YEAR '0' F_PERI INTO E_T_DATA-FISCPER.
      MODIFY E_T_DATA. " from gs_bsis transporting dmbtr fiscper.
      CLEAR: E_T_DATA.
    ENDLOOP.
      S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
   ENDIF.

Hi,
Please check the log of same jobs for last week and check is today its taking more time,also check with basis is their any backup initited at same time.
Moreover until the background job failed automatically its difficult to imagine what is the exact issue.
Thanks,

Error While Creating The Generic Data Source.

Hi Gurus,
I am trying to create a Generic Data Source (ZGG_TEST) on a View (ZV_TEST1)
View as Follows:
Table1 has the Following Fields
Field Type
MANDT CLNT
RECNO NUMC
STATUS CHAR
LMODF CHAR
Table2 has Fields
Fields Type
MANDT CLNT
RECNO NUMC
PHCOS QUAN
MATNR CHAR
EQSFS QUAN
MEINS UNIT
In Table2 under Currency and Quantity Field tab
For Field PHCOS The Reference table is MSEG and Reference Field is MEINS
For Field EQSFS the Reference Table is MSEG and reference field is MEINS
View Description
Tables:
Table1
Table2
MSEG
Join condition For the View is
TABLE2-MANDT=TABLE1-MANDT
TABLE2-RECNO=TABLE1-RECNO
TABLE2-MANDT=MSEG-MANDT
TABLE2-MATNR=MSEG-MATNR
The Problem is While saving the Data Source it is Giving an Error as Follows
Invalid extract structure template ZV_TEST1 of DataSource zgg_test
Message no. R8359
Diagnosis
You tried to generate an extract structure with the template structure zgg_test. This operation failed, because the template structure quantity fields or currency fields, for example, field PHCOS refer to a different table.
Procedure
Use the template structure to create a view or DDIC structure that does not contain the inadmissible fields.
Please help me In Solving this Issue
Thanks in advance
Santosh

n Table2 under Currency and Quantity Field tab
For Field PHCOS The change Reference table to TABLE2 For Field EQSFS the change the Reference Table to TABLE2
ref field MEINS ...
This works ..
Priya
Edited by: Priya on Dec 31, 2007 1:30 PM

Error while creating Generic data source using FM

Hi Experts,
I try to create a generic data source using the Function Module via the transaction RSO2. I got the following error messages.
" Das Einheitenfeld CURR des Feldes ZPKZA1 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
" Das Einheitenfeld CURR des Feldes ZPKZA2 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
" Das Einheitenfeld CURR des Feldes ZPKZA10 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
"The unit field CURR of the field ZPKZA1 of the DATA SOURCE ZBWN_DS_POLPOSP is not visible/ stopped/ hide".
for all 10 fields of type CURR.
How shall i handle this issue..........any suggestions please........
thanks in advance
cheers
sailekha

Hi,
Are your CURR fields refereded to a currency field of your structure?? Maybe the problem is that the field containing the currency is refered to other table/structure and it has to be one of your structure fields.
Hope this helps,
Regards,
Carlos.

BW Master data delta generic data source for further update in BW

Hi BWers,
I am looking for an option to load delta from Master data to another master data within BW. Export data source option for master data only has full load option but no delta update possible.
I tried creating generic data source delta enabled on view of master data (/BI/M). But the problem I am facing now is master data contains quantity field as attribute and this field refers another table RSDKYF for unit. To be able to create data source on view / table no field should refer field in another table.
Did anybody create delta for master data for further loading within BW or came across similar issue with key figures, please let me know the best procedure in this scenario? Appreciate your quick response.
Regards,
Madhav

In your master data attribute have a date field which will be filled by the R/3 load as sy-datum - then create an export datasource and in the infopackage - give a selectoion for the date field as sy-datum and sy-datum -1..
Not exactly a delta but then usually master data is not kept as delta because the volumes are usually less - you can achieve delta by this method...

Generic Data Source is calling multiple times in RSA3

[color:red}<Moderator Message: This topic has alread been discussed a lot of times. Additionally there are weblogs related to it. Please search the forums and/or the blogs for this issue>
Hi experts,
I have the requirement to get data from Generic Data Sources with function Module,
after finishing the FM I have checked in extact checker(RSA)
in the internal table I_T_DATA is displays 281 records,
but in RSA3 it shows 112560 records, I found that the FM is calling multiple time by executing one time in RSA3.
1.what would be the problem
2.where is the porblem is it in FM coding or any other places to check.
<removed by moderator>
Regards
Vijay
Edited by: Siegfried Szameitat on Feb 3, 2009 11:45 AM

Hi Savita,
I don't understand clearly from your reply regarding flow you transported and what all you transported.
You need to first transport objects in R/3 and import them.
Then transport Infoprovider, Datasource in BI assuming depenedent Infoare Infoobject, application component already transported.
Then transport your Infosource, Update rule, Transfer rules, Infopackage.
Hope you understood.
Ravi

Generic data source with float field possible?

Hello,
when creating an generic data source using a view with a float field I get error R8359 (extract structure: You tried to generate an extract structure with the template structure .... This operation failed, because the template structure quantity fields or currency fields, for example, field ... refer to a different table.).
I changed the data element from ATFLV to e.g. FLOAT but it did not help.
SAP hint 335342 deals with this issue, but I just want to use the float number without the unit.
Is this possible or do I need to write a function module?
Best regards
Thomas

Hi,
you could try to add the unit table and field to your view. When saving the datasource in RSO2, you can choose to hide these fields if you don't want them extracted into BW.
Regards,
Øystein

Generic data source issue very urjent

Similar Messages

Maybe you are looking for