Generic Data Source On Material Document
Hello
I have created a generic Data source & i want to extract the delta on the basis of Material Document instead of Posting Date.Is it possible to extract the same & how it effects on the extraction performance ?
Hey Experts,
Plz help me out from this.
Thanks
Neha
Thanks a lot Sachin
let me check this first , then i will definitly let u know.
One more thing :
Is there any upper or lower limit in numeric pointer settings also like in time stamp setting???
Neha
Similar Messages
-
Regarding: Loading data from R/3 To BI for a Generic Data source
Hi Every,
Need Help Urgent
I had created a Generic data source with function Module as the data source, in Rsa3 it is working fine.
1-> I had replicated the data source to Bi then i had created a info package and then I executed the same. when it is getting the data and it is show in the request monitor (Number of records ) but the status is not changing from Yellow to Green.
Status in Step by step analysis is every step is green Except "Data selection successfully finished ?" (RED)
2-> Then I had seen the Back ground job in Source system which is executing still. I waited for it for a long time but nearly 30 min.
(I had done Steps one and 2 number of time by activating replicating the data source and so on, but still their is no change in it)
3-> Then I had canceled that back ground job with the help of BASIS (as i feel that it is something going wrong).
4-> I feel that their is some thing wrong in the Code of Extractor.
Please Help...............
""Local Interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE ZBI_MATGRIR OPTIONAL
*Need to get the data only for two Gl account which are fro material purchase while MIGO
*G/L Account Numbers: 0010502001 0010502002
data: E_T_DATA1 type table of ZBI_MATGRIR.
RANGES: R_BUKRS FOR BSIS-BUKRS,
R_BUDAT FOR BSIS-BUDAT,
R_GJAHR FOR BSIS-GJAHR,
R_HKONT FOR BSIS-HKONT.
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
S_COUNTER_DATAPAKID LIKE SY-TABIX,
S_CURSOR TYPE CURSOR.
*Declare
TYPES: BEGIN OF TY_FAGL,
RBURS TYPE FAGLFLEXA-RBUKRS,
RYEAR TYPE FAGLFLEXA-RYEAR,
DOCNR TYPE FAGLFLEXA-DOCNR,
BUZEI TYPE FAGLFLEXA-BUZEI,
DOCLN TYPE FAGLFLEXA-DOCLN,
PRCTR TYPE FAGLFLEXA-PRCTR,
SEGMENT TYPE FAGLFLEXA-SEGMENT,
END OF TY_FAGL.
DATA: GT_FAGL TYPE TABLE OF TY_FAGL,
GS_FAGL TYPE TY_FAGL.
IF I_INITFLAG = SBIWA_C_FLAG_ON.
CASE I_DSOURCE.
WHEN 'ZFI_GL_M4'.
WHEN OTHERS.
IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
LOG_WRITE 'E' "message type
'R3' "message class
'009' "message number
I_DSOURCE "message variable 1
' '. "message variable 2
RAISE ERROR_PASSED_TO_MESS_HANDLER.
ENDCASE.
APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
S_S_IF-REQUNR = I_REQUNR.
S_S_IF-DSOURCE = I_DSOURCE.
S_S_IF-MAXSIZE = I_MAXSIZE.
APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.
Data transfer: First Call OPEN CURSOR + FETCH
Following Calls FETCH only
First data package -> OPEN CURSOR
IF S_COUNTER_DATAPAKID = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUKRS'.
MOVE-CORRESPONDING L_S_SELECT TO R_BUKRS.
APPEND R_BUKRS.
ENDLOOP.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GJAHR'.
MOVE-CORRESPONDING L_S_SELECT TO R_GJAHR.
APPEND R_GJAHR.
ENDLOOP.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUDAT'.
MOVE-CORRESPONDING L_S_SELECT TO R_BUDAT.
APPEND R_BUDAT.
ENDLOOP.
*GRIR Inventory (RM/Stores/Spares/FG) 10502001
*GRIR Services & Others Payable 10502002
R_HKONT-SIGN = 'I'. "i_t_select-sign.
R_HKONT-OPTION = 'BT'." i_t_select-option.
R_HKONT-LOW = '0010502001'.
R_HKONT-HIGH = '0010502002'. "i_t_select-high.
APPEND R_HKONT.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT BUKRS
AUGBL
ZUONR
BELNR
GJAHR
BUZEI
BUDAT
HKONT
BLART
MONAT
BSCHL
SHKZG
DMBTR
WAERS
FROM BSIS
INTO TABLE E_T_DATA
WHERE BUKRS IN R_BUKRS
AND GJAHR IN R_GJAHR
AND BUDAT IN R_BUDAT
AND HKONT IN R_HKONT.
Fetch records into interface table.
named E_T_'Name of extract structure'.
FETCH NEXT CURSOR S_CURSOR
APPENDING CORRESPONDING FIELDS
OF TABLE E_T_DATA1
PACKAGE SIZE S_S_IF-MAXSIZE.
IF SY-SUBRC <> 0.
CLOSE CURSOR S_CURSOR.
RAISE NO_MORE_DATA.
ENDIF.
DELETE E_T_DATA WHERE BLART NE 'WE'.
SELECT BUKRS
AUGBL
ZUONR
BELNR
GJAHR
BUZEI
BUDAT
HKONT
BLART
MONAT
BSCHL
SHKZG
DMBTR
WAERS
FROM BSAS
into table E_T_DATA
WHERE BUKRS IN R_BUKRS
AND GJAHR IN R_GJAHR
AND BUDAT IN R_BUDAT
AND HKONT IN R_HKONT.
FETCH NEXT CURSOR S_CURSOR
APPENDING CORRESPONDING FIELDS
OF TABLE E_T_DATA
PACKAGE SIZE S_S_IF-MAXSIZE.
append LINES OF e_t_data1 TO E_T_DATA.
DELETE E_T_DATA WHERE BLART NE 'WE'.
ENDIF. "First data package ?
DATA: F_YEAR TYPE BKPF-GJAHR.
DATA: F_PERI TYPE BAPI0002_4-FISCAL_PERIOD.
IF E_T_DATA[] IS NOT INITIAL.
SELECT RBUKRS
RYEAR
DOCNR
BUZEI
DOCLN
PRCTR
SEGMENT
FROM FAGLFLEXA
INTO TABLE GT_FAGL
FOR ALL ENTRIES IN E_T_DATA
WHERE RYEAR = E_T_DATA-GJAHR
AND DOCNR = E_T_DATA-BELNR
AND RLDNR = '0L'
AND RBUKRS = E_T_DATA-BUKRS
AND BUZEI = E_T_DATA-BUZEI.
WHERE RYEAR = E_T_DATA-GJAHR
AND DOCNR = E_T_DATA-BELNR
AND RBUKRS = E_T_DATA-BUKRS.
AND DOCLN = E_T_DATA-BUZEI.
ENDIF.
LOOP AT E_T_DATA.
IF E_T_DATA-SHKZG = 'H'.
E_T_DATA-DMBTR = E_T_DATA-DMBTR * -1.
ENDIF.
CLEAR: F_YEAR.
CALL FUNCTION 'BAPI_COMPANYCODE_GET_PERIOD'
EXPORTING
COMPANYCODEID = E_T_DATA-BUKRS
POSTING_DATE = E_T_DATA-BUDAT
IMPORTING
FISCAL_YEAR = F_YEAR
FISCAL_PERIOD = F_PERI.
DATA: V_DOC(6) TYPE C .
CLEAR: V_DOC.
V_DOC = E_T_DATA-BUZEI.
IF V_DOC IS NOT INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = V_DOC
IMPORTING
OUTPUT = V_DOC.
ENDIF.
aS PROFIT center is not updated in all the lines in Bsis
READ TABLE GT_FAGL INTO GS_FAGL WITH KEY RYEAR = E_T_DATA-GJAHR
DOCNR = E_T_DATA-BELNR
RBURS = E_T_DATA-BUKRS
BUZEI = E_T_DATA-BUZEI.
IF SY-SUBRC = 0.
E_T_DATA-PRCTR = GS_FAGL-PRCTR.
E_T_DATA-SEGMENT = GS_FAGL-SEGMENT.
ENDIF.
*As we are using the amount DMBTR in which the amount
*will be in company code currency that is Local currency
*group currency always in the main company code currency.
CONCATENATE F_YEAR '0' F_PERI INTO E_T_DATA-FISCPER.
MODIFY E_T_DATA. " from gs_bsis transporting dmbtr fiscper.
CLEAR: E_T_DATA.
ENDLOOP.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.Hi,
Please check the log of same jobs for last week and check is today its taking more time,also check with basis is their any backup initited at same time.
Moreover until the background job failed automatically its difficult to imagine what is the exact issue.
Thanks, -
Extraction, Flat File, Generic Data Source, Delta Initialization
Extraction, Flat File, Generic Data Source, Delta Initialization
I have couple of questions regarding data extraction.
1. If you have Data Source a Flat File e.g. Excel file I know that you have to create Data Source at BW side. How do you upload updates, by selecting Delta Update when executing next Data Load? Do you ever u201Cconvertu201D this Excel file into Application Tables to become SAP Source
2. Can you please give me example of situation where you had to create Generic Data Source? What is difference between Time Stamp, Calend. Day and Numeric Pointer. Which one is most common to select?
3. I read somewhere that Generic Data Source does not have Setup Table. I thought that you have to have Setup Table in order to load transaction Data otherwise you will lock the Application Tables. Where am I going wrong im my thinking please?
4. What are steps in terms of IP before, under and after Delta Initialization. I belive that you can do two ways:
Full Update - Initialize Delta Process (without Data Transfer) u2013 Delta Update or
Initialize Delta Process (with Data Transfer) u2013 Delta Update
Am I right? What is most common method and why?
5. If you want to add a filed in Data Source after 6 month using it, you want to do it without re-init Delta Queue. You add field in RSA6, then provide info for ABAP to populate new filed (info u2013 name of Data Source, Extract Structure, field added, name of Application Table which contains the field). How does it work now as there is no SetUp table it has been deleted after Initialisation? How does Delta Queue know that it is going to receive data which has been expanded by one field or it may does not need to know at all?
THANKSSSSSSSSSsHi,
1. If you have Data Source a Flat File e.g. Excel file I know that you have to create Data Source at BW side. How do you upload updates, by selecting Delta Update when executing next Data Load? Do you ever u201Cconvertu201D this Excel file into Application Tables to become SAP Source
Once you create Datasource for A flat file extraction then it is file source system specific hence you cont change to Application table source Data source
In info package you can change the source as application server instead of desktop no need to change the DS
2. Can you please give me example of situation where you had to create Generic Data Source? What is difference between Time Stamp, Calend. Day and Numeric Pointer. Which one is most common to select?
When we don't find any standard extractor then we can go for Generic(if i want information sales along with finance information in a data source then generally we dont get standard one hence we can go for generic DS)
Check the below link for More about generic DS .
http://wiki.sdn.sap.com/wiki/display/BI/Generic+Extraction
for Delta capturing you can use
Timestamp(if the table has time stamp filed so it can stamp the last changed record in that table hence it is easy to get delta based on the time stamp)
Calday- (If the table doesn't have the Timestamp filed then search for Calday where you can stamp the delta based on the date when documents are changed )
Numericpointer : If the table doesn't above both then we go for this option where you can the numeric value change stamp )
3. I read somewhere that Generic Data Source does not have Setup Table. I thought that you have to have Setup Table in order to load transaction Data otherwise you will lock the Application Tables. Where am I going wrong im my thinking please?
Generic datasource nothing but we extracting data directly from the database table without any interface between the application/systems
4. What are steps in terms of IP before, under and after Delta Initialization. I belive that you can do two ways:
Full Update - Initialize Delta Process (without Data Transfer) u2013 Delta Update or
Initialize Delta Process (with Data Transfer) u2013 Delta Update
Am I right? What is most common method and why?
Correct
5. If you want to add a filed in Data Source after 6 month using it, you want to do it without re-init Delta Queue. You add field in RSA6, then provide info for ABAP to populate new filed (info u2013 name of Data Source, Extract Structure, field added, name of Application Table which contains the field). How does it work now as there is no SetUp table it has been deleted after Initialisation? How does Delta Queue know that it is going to receive data which has been expanded by one field or it may does not need to know at all?
Once you add the new field to structure(DS) you will get the data as on date onwards not historical data hence what is the concept of setup table ( delta records come from the Delta Que not from the setup table )
If you want histaric data to new field then you need to setp table deletion ...etc...
Hope it is clear..
Regards,
Satya -
Duplicate records in generic data source
Hello,
We have created a generic data source using a database view joing two tables MARA and MBEW.
When we run the view in our DEV server, we get perfectly fine data. Now when run the same view in QA, we get duplicate records.
Is it any thing to do with the CLIENT as in QA, we have 2 clients with same data.
MARA MANDT = MBEW MANDT
MARA MATNR = MBEW MATNR
This is what I mention in JOIN Conditions.
Hope I could explain my issue properly. Please HELP !
AbhishekPlease check the possibility of Multiple records for a given material in MBEW,as same material can be in multiple valuation areas
More over you will be executing extraction in one client so it is very unlikely that you see data of the other client
In dev normally we do not have good data to test so it seems like design is correct in dev -
How to create generic data source in R/3
hi experts !
i m a beginner in BIW.
i wan to create a generic data source in my R/3 system. since there exists a Z table which i want to use in designing an infocube in my BI system. please someone help me how should i begin with doing it ?
thanx in advance
akankshaAkanksha,
Here am providing you with a scenario when we go for Generic Datasource and also the steps to create a Generioc DS:
We can create datasource based on View, Table, SAP Query or ABAP Query, and Function Module.
Scenario for Generic Datasource.
One of the Manager who using reports wanted to have the report which will him the list customers and sales document numbers created by them.
In this case we can use of VIEW where kna1 and vbak tables were combined in the View definition or else u can say that ABAPer had given the required view.
How to create the generic Datasource.
Goto RS02, select the Transactional Data, it will takes us to the next screen, where we need to give application component name say SD (01), then give the name of the Datasource that u wanted, select view and give the view name. Below that field we need give 3 descriptions. Then save and activate the datasource.
Go back to the RSA6 screen transport it to BW system. Replicate the DS.
Hope it helps..
Assign Points if it helps
Regards,
Gattu -
Detla Infopackage Creation problem at Generic data source
Hi Experts..
In 7.0 BI I'm loading data in infoCube through generic data source ( type Table View). I have loaded the data first time ie Full mode. Now I would like to change update mode full to Delta. i have tried to create new infoPackage with DELTA Update MODE but this option is not available. as i have used Transformation and DTP to fetch the data in Info cube. in data souce Generic Delta is enabled at Numeric pointer.
your help will highly appreciable.
Regards
kamal
INDIA>
kspurohit wrote:
> Delta specif field kept blank with option Numeric Pointer...
You have to fill in the Delta-Specific Field Name for any of the options. Numeric pointer is usually a document number that is guaranteed to increment with every change. This would not be a good choice for documents that can be changed after initial creation, or for number ranges that are buffered across application servers (unless you can set the safety limits to compensate).
After that, create and run an init InfoPackage, then you will be able to create a delta InfoPackage. -
Error While Creating The Generic Data Source.
Hi Gurus,
I am trying to create a Generic Data Source (ZGG_TEST) on a View (ZV_TEST1)
View as Follows:
Table1 has the Following Fields
Field Type
MANDT CLNT
RECNO NUMC
STATUS CHAR
LMODF CHAR
Table2 has Fields
Fields Type
MANDT CLNT
RECNO NUMC
PHCOS QUAN
MATNR CHAR
EQSFS QUAN
MEINS UNIT
In Table2 under Currency and Quantity Field tab
For Field PHCOS The Reference table is MSEG and Reference Field is MEINS
For Field EQSFS the Reference Table is MSEG and reference field is MEINS
View Description
Tables:
Table1
Table2
MSEG
Join condition For the View is
TABLE2-MANDT=TABLE1-MANDT
TABLE2-RECNO=TABLE1-RECNO
TABLE2-MANDT=MSEG-MANDT
TABLE2-MATNR=MSEG-MATNR
The Problem is While saving the Data Source it is Giving an Error as Follows
Invalid extract structure template ZV_TEST1 of DataSource zgg_test
Message no. R8359
Diagnosis
You tried to generate an extract structure with the template structure zgg_test. This operation failed, because the template structure quantity fields or currency fields, for example, field PHCOS refer to a different table.
Procedure
Use the template structure to create a view or DDIC structure that does not contain the inadmissible fields.
Please help me In Solving this Issue
Thanks in advance
Santoshn Table2 under Currency and Quantity Field tab
For Field PHCOS The change Reference table to TABLE2 For Field EQSFS the change the Reference Table to TABLE2
ref field MEINS ...
This works ..
Priya
Edited by: Priya on Dec 31, 2007 1:30 PM -
Error while creating Generic data source using FM
Hi Experts,
I try to create a generic data source using the Function Module via the transaction RSO2. I got the following error messages.
" Das Einheitenfeld CURR des Feldes ZPKZA1 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
" Das Einheitenfeld CURR des Feldes ZPKZA2 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
" Das Einheitenfeld CURR des Feldes ZPKZA10 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
"The unit field CURR of the field ZPKZA1 of the DATA SOURCE ZBWN_DS_POLPOSP is not visible/ stopped/ hide".
for all 10 fields of type CURR.
How shall i handle this issue..........any suggestions please........
thanks in advance
cheers
sailekhaHi,
Are your CURR fields refereded to a currency field of your structure?? Maybe the problem is that the field containing the currency is refered to other table/structure and it has to be one of your structure fields.
Hope this helps,
Regards,
Carlos. -
Error while doing DELTA Extraction (generic data source)
Hi BW Experts,
In my R/3, I have a generic data source ZBUT_VW.
It receives data from a View which is created based on couple tables.
When I do full load to the corresponding ODS, it is successful.
But after that I delete the ODS and created CUBE with DELTA
I have Initialized delta.
When I do DELTA extraction, it fails.
The error The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
I delete the initialization load and trying to do DELTA extraction again and it Fails.
With the same error
Please let me know how can I resolve this problem.
URGENT
gauravI dont think it is possible to have to additive delta with creation date.
Try a full load to cube to check if the extractor is working. -
Hi,
I am trying to use "IBIMonitoringAuthoring" in my local web site.
But i am getting error like "Server was unable to process request. ---> You do not have permissions to create a data source in this document library. Additional details have been logged for your administrator."
My code is below,
string url = ServerName + webServiceUrl;
IBIMonitoringAuthoring biService = BIMonitoringAuthoringServiceProxy.CreateInstance(url);
//Create data source object
DataSource dataCube = new DataSource("AW_Data_Cube");
dataCube.Name.Text = "AW_Data_Cube";
dataCube.ServerName = "SQL2008dev";
dataCube.DatabaseName = "Analysis Services Project1";
dataCube.CubeName = "TestCube";
dataCube.ConnectionContext = ConnectionContext.ConnectAsSharedUser;
dataCube.FormattingDimensionName = "Measures";
dataCube.MinutesToCache = 10;
dataCube.CustomTimeIntelligenceSettings = "";
biService.CreateDataSource(connectionListUrl, dataCube);
How could i authenticate the Service. Is there any way to pass credentials for this method?
Thanks & Regards
Poomani SankaranI suffered similar issue in Infopath, and i finally solved the issue by changing the data connection URL, it should the same as the Infopath publish location.
for example: SP server iP 192.168.1.1 have two name, hostname is mySP, alternate assces mapping name is companySP, and you can access the websit by both
http://mySP and
http://companySP
hope it can help someone.. -
Error while testing Generic Data Source extraction
I've created generic data source for Texts and Attributes in R/3 based on VIEW (Z table)
I get error "Error 6 in function module RSS_PROGRAM_GENERATE" while trying to test the data sources through RSO2
I guess there can be a lot of reasons... Please name me anybody who knows them...
thanx in advanceHi,
Please Check the OSS note 328948 and it provides solution to same error what you have. Additionally you can have a look into this OSS note 705212 too.
Syntax error in the generated extraction program Symptom
You notice the error by one of the following symptoms:
The loading of transaction data from an R/3 system terminates with a syntax error in the generated extraction program. The monitor displays the error messages:
R3027 "Error & during the generation of the data transfer program"
RSM340 "Error in the source system"
The extraction within the extractor checker terminates with error message RJ028 "Error 6 in function module RSS_PROGRAM_GENERATE".The activation of transfer rules ends in BW with error message RG102 "Syntax error in GP$ERR$, row... (-> long text)" from the source system. Usually, the diagnosis in the long text of the error message is: "...could not be interpreted. Possible error causes: Incorrect notation or... "
Other terms
OLTP, extractor, data extraction, DataSource, Service API, SAPI,
R3 027, R3 27, RSM 340, RJ 028, RJ 28
Reason and Prerequisites
The error only occurs in the source system, if this contains Basis Release 3.1I and Service API (SAPI) 3.0C Support Package 6. SAPI 3.0C Support Package 6 is contained, for example, in PI 2003.1 Support Package 7 (see attached composite SAP note 673002).
Solution
To correct the problem you need service API 3.0C Support Package 7 in the affected source system. The attached composite SAP note 704971 explains in which software components service API 3.0C is contained, and what the corresponding Support Packages of these components are.
Alternatively, you can also copy the advance correction from the appendix.
Hope it helps.
Regards -
More than one field in generic data source
Hi All,
We wanted extract Allocation data for the sales order from R/3 to BW. I am not able to find proper data source for it... there are two datasources..we wanted afs specific datasource
2LIS_11_V_ITM : Sales-Shipping Allocation Item Data
2LIS_11_V_SCL : Sales-Shipping Allocation Schedule Line
But its not reflecting allocated quantity at all...
So we decided to create generic data source.. but there is one problem for some allocation ARUN is initial.. so i cann't use ARUN as delta field... can i use comination of Sales order no,Item and Schedule line number as delta field....
Because in RSO2 i can define only one field as delta specific field....
How to proceed ???
Regards,
Viren.Hi,
If you decided to use generic data source, make sure that, U'll have to take only
one filed as a delta, I suggest, you take any date field rather than the value fields
it may be created date/change date and so on so forth..
Regards,
Pattan. -
Generic Data Source issue in CRM.
Hi Guru's,
Generic Data Source with Table gave an issue "invalid Extracture structure template XXXXX of Data source XXXXX"
Generic Data source with Function Module gave an issue "Units field VOLUM_U for field VOLUME of DataSource ZTEST_XYZ is hidden"
Generic Data Source with View configured successfully but the data is not coming in Extractor Checker.
Three tables has taken in to consideration. I think there might be some issue with Join condition.
Can any one through light on this incident. Your help will be appreciated.
Thanks in Advance.
Venkat.Hi Praveen,
yes you are right. I took reference field as VOLUM_U.
I have created Generic Table. Do you need me to take same table in the reference Table.
Thanks
Venkat. -
BW Master data delta generic data source for further update in BW
Hi BWers,
I am looking for an option to load delta from Master data to another master data within BW. Export data source option for master data only has full load option but no delta update possible.
I tried creating generic data source delta enabled on view of master data (/BI/M). But the problem I am facing now is master data contains quantity field as attribute and this field refers another table RSDKYF for unit. To be able to create data source on view / table no field should refer field in another table.
Did anybody create delta for master data for further loading within BW or came across similar issue with key figures, please let me know the best procedure in this scenario? Appreciate your quick response.
Regards,
MadhavIn your master data attribute have a date field which will be filled by the R/3 load as sy-datum - then create an export datasource and in the infopackage - give a selectoion for the date field as sy-datum and sy-datum -1..
Not exactly a delta but then usually master data is not kept as delta because the volumes are usually less - you can achieve delta by this method... -
How to enable delta in a generic Data Source
Hi,
I am developing a Generic Data Source (Z) based on a view.
How can i enable it to delta capable...
What is the concept of Calanderday......timestamp....pointer
How can i make a decesion (what factors do i need to consider) to go for Calanderday......timestamp....pointer
Please provide me detail steps & description on this as this is my first data source
Thankshi
how to ...gds
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
1. Time stamp - The field is a DEC15 field which always contains the time stamp of the last change to a record in the local time format.
2. Calendar day - The field is a DATS8 field which always contains the day of the last change.
3. Numerical pointer - The field contains another numerical pointer that appears with each new record
Please check this link on generic delta
http://help.sap.com/saphelp_nw04s/helpdata/en/37/4f3ca8b672a34082ab3085d3c22145/frameset.htm
WHEN U CHECK UR DATASOURCE IN RSA6 U WILL FIND THE DELTA UPDATE CHECKBOX IS CHECKED.....
hope it helps,
cheers.
Maybe you are looking for
-
Problem with Macbook Pro 2,66Ghz and 4GB Kingston memory
Hi all, I bought 2x 2GB Kingston memory(SODIMM - DDR2 @ 667MHz) in order to upgrade my MBP. When I install both modules, the MBP won;t boot. I get a blank screen. If I use 1 Kingston module at a time (1x1GB(original memory module)and 2GB(Kingston)) .
-
Please: HELP with iMIX. Urgent !
Dear all I tried to find an apple.com eMail to ask this help without be successful. Please I hope you can help me. Well: I did an iMix including 7 songs on the list. I followed exactly all the iTune instructions. BUT when I published this list, it re
-
Source of the file can not be read
Hi all ... maybe someone can give me some ideas? I have a client who is trying to download these video's. Hunt you might remember we changes them over to the XVID - MPEG4 format. Well, I'm still not able to get the downloads stable enough so that I
-
Lync Server Control Panel : Insufficient access rights to perform the operation;
Hi team, I have a strange problem in managing Lync users through control panel. But I can enable/disable and Manage users through power shell. Am getting an error " Insufficient Rights to perform the operations" when i try through control panel Pleas
-
Remove Server function in the Netscape Console does not function
Remove Server Instance does not function or not accessible. Am trying to remove a server from the console (Netscape Console 4.1) unfortunately i cannot access this specific functionality. Already tried re-installing but it does'nt function